| Message ID | 20200311121809.5610-17-ajay.kathat@microchip.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | wilc1000: move out of staging | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | success |
On Wed, Mar 11, 2020 at 12:18:50PM +0000, Ajay.Kathat@microchip.com wrote: > From: Ajay Singh <ajay.kathat@microchip.com> > > This file describes the binding details to connect wilc1000 device. It's > moved from staging to 'Documentation/devicetree/bindings/net/wireless' > path. > > Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> > --- > .../net/wireless/microchip,wilc1000.yaml | 72 +++++++++++++++++++ > 1 file changed, 72 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > > diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > new file mode 100644 > index 000000000000..bc6cc5d3f347 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml > @@ -0,0 +1,72 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip WILC wireless devicetree bindings > + > +maintainers: > + - Adham Abozaeid <adham.abozaeid@microchip.com> > + - Ajay Singh <ajay.kathat@microchip.com> > + > +description: > + The wilc1000 chips can be connected via SPI or SDIO. This document > + describes the binding to connect wilc devices. > + > +properties: > + compatible: > + const: microchip,wilc1000 > + > + spi-max-frequency: true > + > + interrupts: > + maxItems: 1 > + > + clocks: > + description: phandle to the clock connected on rtc clock line. > + maxItems: 1 > + > + clock-names: > + const: rtc > + > +required: > + - compatible > + - interrupts > + > +examples: > + - | > + spi1: spi@fc018000 { spi { > + #address-cells = <1>; > + #size-cells = <0>; > + cs-gpios = <&pioB 21 0>; Drop this. Not relevant to the example. > + wifi@0 { > + compatible = "microchip,wilc1000"; > + spi-max-frequency = <48000000>; > + reg = <0>; > + interrupt-parent = <&pioC>; > + interrupts = <27 0>; > + clocks = <&pck1>; > + clock-names = "rtc"; > + }; > + }; > + > + - | > + mmc1: mmc@fc000000 { Drop the label. Either drop the unit address or add a 'reg' property to match. > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; > + non-removable; > + vmmc-supply = <&vcc_mmc1_reg>; > + vqmmc-supply = <&vcc_3v3_reg>; > + bus-width = <4>; > + wifi@0 { > + compatible = "microchip,wilc1000"; > + reg = <0>; > + interrupt-parent = <&pioC>; > + interrupts = <27 0>; > + clocks = <&pck1>; > + clock-names = "rtc"; > + }; > + }; > -- > 2.24.0
Hi Rob, On 20/03/20 11:29 pm, Rob Herring wrote: > > On Wed, Mar 11, 2020 at 12:18:50PM +0000, Ajay.Kathat@microchip.com wrote: >> From: Ajay Singh <ajay.kathat@microchip.com> >> >> This file describes the binding details to connect wilc1000 device. It's >> moved from staging to 'Documentation/devicetree/bindings/net/wireless' >> path. >> >> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> >> --- >> .../net/wireless/microchip,wilc1000.yaml | 72 +++++++++++++++++++ >> 1 file changed, 72 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml >> >> diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml >> new file mode 100644 >> index 000000000000..bc6cc5d3f347 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml >> @@ -0,0 +1,72 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Microchip WILC wireless devicetree bindings >> + >> +maintainers: >> + - Adham Abozaeid <adham.abozaeid@microchip.com> >> + - Ajay Singh <ajay.kathat@microchip.com> >> + >> +description: >> + The wilc1000 chips can be connected via SPI or SDIO. This document >> + describes the binding to connect wilc devices. >> + >> +properties: >> + compatible: >> + const: microchip,wilc1000 >> + >> + spi-max-frequency: true >> + >> + interrupts: >> + maxItems: 1 >> + >> + clocks: >> + description: phandle to the clock connected on rtc clock line. >> + maxItems: 1 >> + >> + clock-names: >> + const: rtc >> + >> +required: >> + - compatible >> + - interrupts >> + >> +examples: >> + - | >> + spi1: spi@fc018000 { > > spi { > >> + #address-cells = <1>; >> + #size-cells = <0>; >> + cs-gpios = <&pioB 21 0>; > > Drop this. Not relevant to the example. Ok. > >> + wifi@0 { >> + compatible = "microchip,wilc1000"; >> + spi-max-frequency = <48000000>; >> + reg = <0>; >> + interrupt-parent = <&pioC>; >> + interrupts = <27 0>; >> + clocks = <&pck1>; >> + clock-names = "rtc"; >> + }; >> + }; >> + >> + - | >> + mmc1: mmc@fc000000 { > > Drop the label. Either drop the unit address or add a 'reg' property to > match. Ok. I will drop the label and unit address in this. Regards, Ajay
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml new file mode 100644 index 000000000000..bc6cc5d3f347 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip WILC wireless devicetree bindings + +maintainers: + - Adham Abozaeid <adham.abozaeid@microchip.com> + - Ajay Singh <ajay.kathat@microchip.com> + +description: + The wilc1000 chips can be connected via SPI or SDIO. This document + describes the binding to connect wilc devices. + +properties: + compatible: + const: microchip,wilc1000 + + spi-max-frequency: true + + interrupts: + maxItems: 1 + + clocks: + description: phandle to the clock connected on rtc clock line. + maxItems: 1 + + clock-names: + const: rtc + +required: + - compatible + - interrupts + +examples: + - | + spi1: spi@fc018000 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&pioB 21 0>; + wifi@0 { + compatible = "microchip,wilc1000"; + spi-max-frequency = <48000000>; + reg = <0>; + interrupt-parent = <&pioC>; + interrupts = <27 0>; + clocks = <&pck1>; + clock-names = "rtc"; + }; + }; + + - | + mmc1: mmc@fc000000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + non-removable; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + bus-width = <4>; + wifi@0 { + compatible = "microchip,wilc1000"; + reg = <0>; + interrupt-parent = <&pioC>; + interrupts = <27 0>; + clocks = <&pck1>; + clock-names = "rtc"; + }; + };