@@ -82,7 +82,8 @@ demote_xx_ovsdb () {
local sync_from_proto=$2
local sync_from_port=$3
local active_conf_file=$4
- local ctl_file=$5
+ local inactive_probe_to_active=$5
+ local ctl_file=$6
if test ! -z "$sync_from_addr"; then
echo "$sync_from_proto:$sync_from_addr:$sync_from_port" > $active_conf_file
@@ -91,6 +92,7 @@ demote_xx_ovsdb () {
if test -e $active_conf_file; then
ovn-appctl -t $OVN_RUNDIR/$ctl_file ovsdb-server/set-active-ovsdb-server `cat $active_conf_file`
ovn-appctl -t $OVN_RUNDIR/$ctl_file ovsdb-server/connect-active-ovsdb-server
+ ovn-appctl -t $OVN_RUNDIR/$ctl_file ovsdb-server/set-active-ovsdb-server-probe-interval $inactive_probe_to_active
else
echo >&2 "$0: active server details not set"
exit 1
@@ -99,12 +101,14 @@ demote_xx_ovsdb () {
demote_ovnnb() {
demote_xx_ovsdb $DB_NB_SYNC_FROM_ADDR $DB_NB_SYNC_FROM_PROTO \
- $DB_NB_SYNC_FROM_PORT $ovnnb_active_conf_file ovnnb_db.ctl
+ $DB_NB_SYNC_FROM_PORT $ovnnb_active_conf_file \
+ $DB_NB_PROBE_INTERVAL_TO_ACTIVE ovnnb_db.ctl
}
demote_ovnsb() {
demote_xx_ovsdb $DB_SB_SYNC_FROM_ADDR $DB_SB_SYNC_FROM_PROTO \
- $DB_SB_SYNC_FROM_PORT $ovnsb_active_conf_file ovnsb_db.ctl
+ $DB_SB_SYNC_FROM_PORT $ovnsb_active_conf_file \
+ $DB_SB_PROBE_INTERVAL_TO_ACTIVE ovnsb_db.ctl
}
demote_ic_nb() {
@@ -642,6 +646,7 @@ set_defaults () {
DB_NB_SYNC_FROM_PROTO=tcp
DB_NB_SYNC_FROM_ADDR=
DB_NB_SYNC_FROM_PORT=6641
+ DB_NB_PROBE_INTERVAL_TO_ACTIVE=60000
DB_SB_SOCK=$OVN_RUNDIR/ovnsb_db.sock
DB_SB_PID=$OVN_RUNDIR/ovnsb_db.pid
@@ -652,6 +657,7 @@ set_defaults () {
DB_SB_SYNC_FROM_PROTO=tcp
DB_SB_SYNC_FROM_ADDR=
DB_SB_SYNC_FROM_PORT=6642
+ DB_SB_PROBE_INTERVAL_TO_ACTIVE=60000
DB_IC_NB_SOCK=$OVN_RUNDIR/ovn_ic_nb_db.sock
DB_IC_NB_PID=$OVN_RUNDIR/ovn_ic_nb_db.pid
@@ -923,10 +929,12 @@ File location options:
--db-nb-sync-from-port=PORT OVN Northbound active db tcp port (default: $DB_NB_SYNC_FROM_PORT)
--db-nb-sync-from-proto=PROTO OVN Northbound active db transport (default: $DB_NB_SYNC_FROM_PROTO)
--db-nb-create-insecure-remote=yes|no Create ptcp OVN Northbound remote (default: $DB_NB_CREATE_INSECURE_REMOTE)
+ --db-nb-probe-interval-to-active Active probe interval from standby to active ovsdb-server remote (default: $DB_NB_PROBE_INTERVAL_TO_ACTIVE)
--db-sb-sync-from-addr=ADDR OVN Southbound active db tcp address (default: $DB_SB_SYNC_FROM_ADDR)
--db-sb-sync-from-port=ADDR OVN Southbound active db tcp port (default: $DB_SB_SYNC_FROM_PORT)
--db-sb-sync-from-proto=PROTO OVN Southbound active db transport (default: $DB_SB_SYNC_FROM_PROTO)
--db-sb-create-insecure-remote=yes|no Create ptcp OVN Southbound remote (default: $DB_SB_CREATE_INSECURE_REMOTE)
+ --db-sb-probe-interval-to-active Active probe interval from standby to active ovsdb-server remote (default: $DB_SB_PROBE_INTERVAL_TO_ACTIVE)
--db-nb-cluster-local-addr=ADDR OVN_Northbound cluster local address \
(default: $DB_NB_CLUSTER_LOCAL_ADDR)
--db-nb-cluster-local-port=PORT OVN_Northbound cluster local tcp port \
@@ -150,6 +150,10 @@
<p><code>--db-ic-sb-cluster-remote-port=<var>PORT NUMBER</var></code></p>
<p><code>--db-ic-sb-cluster-remote-proto=<var>PROTO (tcp/ssl)</var></code></p>
+ <h1> Probe interval options </h1>
+ <p><code>--db-nb-probe-interval-to-active=<var>Time in milliseconds</var></code></p>
+ <p><code>--db-sb-probe-interval-to-active=<var>Time in milliseconds</var></code></p>
+
<h1>Configuration files</h1>
<p>Following are the optional configuration files. If present, it should be located in the etc dir</p>
@@ -241,8 +245,8 @@
<h2>Promote and demote ovsdb servers</h2>
<p><code># ovn-ctl promote_ovnnb</code></p>
<p><code># ovn-ctl promote_ovnsb</code></p>
- <p><code># ovn-ctl --db-nb-sync-from-addr=x.x.x.x --db-nb-sync-from-port=6641 demote_ovnnb</code></p>
- <p><code># ovn-ctl --db-sb-sync-from-addr=x.x.x.x --db-sb-sync-from-port=6642 demote_ovnsb</code></p>
+ <p><code># ovn-ctl --db-nb-sync-from-addr=x.x.x.x --db-nb-sync-from-port=6641 --db-nb-probe-interval-to-active=60000 demote_ovnnb</code></p>
+ <p><code># ovn-ctl --db-sb-sync-from-addr=x.x.x.x --db-sb-sync-from-port=6642 --db-sb-probe-interval-to-active=60000 demote_ovnsb</code></p>
<h2>Creating a clustered db on 3 nodes with IPs x.x.x.x, y.y.y.y and z.z.z.z</h2>
<h3>Starting OVN ovsdb servers and ovn-northd on the node with IP x.x.x.x</h3>
@@ -9,6 +9,7 @@
: ${SB_MASTER_PROTO_DEFAULT="tcp"}
: ${MANAGE_NORTHD_DEFAULT="no"}
: ${INACTIVE_PROBE_DEFAULT="5000"}
+: ${INACTIVE_PROBE_TO_MASTER_DEFAULT="60000"}
: ${LISTEN_ON_MASTER_IP_ONLY_DEFAULT="yes"}
: ${NB_SSL_KEY_DEFAULT="/etc/openvswitch/ovnnb-privkey.pem"}
: ${NB_SSL_CERT_DEFAULT="/etc/openvswitch/ovnnb-cert.pem"}
@@ -27,6 +28,7 @@ SB_MASTER_PORT=${OCF_RESKEY_sb_master_port:-${SB_MASTER_PORT_DEFAULT}}
SB_MASTER_PROTO=${OCF_RESKEY_sb_master_protocol:-${SB_MASTER_PROTO_DEFAULT}}
MANAGE_NORTHD=${OCF_RESKEY_manage_northd:-${MANAGE_NORTHD_DEFAULT}}
INACTIVE_PROBE=${OCF_RESKEY_inactive_probe_interval:-${INACTIVE_PROBE_DEFAULT}}
+INACTIVE_PROBE_TO_MASTER=${OCF_RESKEY_inactive_probe_interval_to_master:-${INACTIVE_PROBE_TO_MASTER_DEFAULT}}
NB_PRIVKEY=${OCF_RESKEY_ovn_nb_db_privkey:-${NB_SSL_KEY_DEFAULT}}
NB_CERT=${OCF_RESKEY_ovn_nb_db_cert:-${NB_SSL_CERT_DEFAULT}}
NB_CACERT=${OCF_RESKEY_ovn_nb_db_cacert:-${NB_SSL_CACERT_DEFAULT}}
@@ -135,6 +137,15 @@ ovsdb_server_metadata() {
<content type="string" />
</parameter>
+ <parameter name="inactive_probe_interval_to_master" unique="1">
+ <longdesc lang="en">
+ Inactive probe interval to use for the connection from standby
+ ovsdb-server to master ovsdb-server.
+ </longdesc>
+ <shortdesc lang="en">Set inactive probe interval to master</shortdesc>
+ <content type="string" />
+ </parameter>
+
<parameter name="listen_on_master_ip_only" unique="1">
<longdesc lang="en">
If set to yes, the OVNDBs will listen on master IP. Otherwise, it will
@@ -266,10 +277,12 @@ inactivity_probe=$INACTIVE_PROBE -- set SB_Global . connections=@conn_uuid
ocf_log debug "ovndb_server: Connecting to the new master ${OCF_RESKEY_CRM_meta_notify_promote_uname}"
${OVN_CTL} demote_ovnnb --db-nb-sync-from-addr=${MASTER_IP} \
--db-nb-sync-from-port=${NB_MASTER_PORT} \
- --db-nb-sync-from-proto=${NB_MASTER_PROTO}
+ --db-nb-sync-from-proto=${NB_MASTER_PROTO} \
+ --db-nb-probe-interval-to-active=${INACTIVE_PROBE_TO_MASTER}
${OVN_CTL} demote_ovnsb --db-sb-sync-from-addr=${MASTER_IP} \
--db-sb-sync-from-port=${SB_MASTER_PORT} \
- --db-sb-sync-from-proto=${SB_MASTER_PROTO}
+ --db-sb-sync-from-proto=${SB_MASTER_PROTO} \
+ --db-sb-probe-interval-to-active=${INACTIVE_PROBE_TO_MASTER}
fi
}
@@ -596,10 +609,12 @@ ovsdb_server_demote() {
# being demoted. Sync to the surviving one
${OVN_CTL} demote_ovnnb --db-nb-sync-from-addr=${MASTER_IP} \
--db-nb-sync-from-port=${NB_MASTER_PORT} \
- --db-nb-sync-from-proto=${NB_MASTER_PROTO}
+ --db-nb-sync-from-proto=${NB_MASTER_PROTO} \
+ --db-nb-probe-interval-to-active=${INACTIVE_PROBE_TO_MASTER}
${OVN_CTL} demote_ovnsb --db-sb-sync-from-addr=${MASTER_IP} \
--db-sb-sync-from-port=${SB_MASTER_PORT} \
- --db-sb-sync-from-proto=${SB_MASTER_PROTO}
+ --db-sb-sync-from-proto=${SB_MASTER_PROTO} \
+ --db-sb-probe-interval-to-active=${INACTIVE_PROBE_TO_MASTER}
else
# For completeness, should never be called