Message ID | 20190929155441.24324-1-lukma@denx.de |
---|---|
State | Superseded |
Delegated to: | Tom Rini |
Headers | show |
Series | [U-Boot,v2] spl: Introduce SPL_DM_GPIO Kconfig define | expand |
Dear Tom, > This define indicates if DM_GPIO shall be supported in SPL. This > allows proper operation of DM converted GPIO drivers in SPL, which use > boards. > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > --- > > Changes in v2: > - Add dependency on DM_GPIO > Tom, are there any issues preventing this patch from being applied to -master? > common/spl/Kconfig | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > index f467eca2be..e3df8efa7e 100644 > --- a/common/spl/Kconfig > +++ b/common/spl/Kconfig > @@ -452,6 +452,12 @@ config SPL_DMA_SUPPORT > the CPU moving the data. Enable this option to build the > drivers in drivers/dma as part of an SPL build. > > +config SPL_DM_GPIO > + bool "Support Driver Model GPIO drivers" > + depends on SPL_GPIO_SUPPORT && DM_GPIO > + help > + Enable support for Driver Model based GPIO drivers in SPL. > + > config SPL_DRIVERS_MISC_SUPPORT > bool "Support misc drivers" > help Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Hi Lukasz, On Wed, 9 Oct 2019 at 03:02, Lukasz Majewski <lukma@denx.de> wrote: > > Dear Tom, > > > This define indicates if DM_GPIO shall be supported in SPL. This > > allows proper operation of DM converted GPIO drivers in SPL, which use > > boards. > > > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > > --- > > > > Changes in v2: > > - Add dependency on DM_GPIO > > > > Tom, are there any issues preventing this patch from being applied to > -master? This does not actually define DM_GPIO anywhere though, so this is unused. As it happens I sent a similar patch[1], but it doesn't work. I'll try again. > > > common/spl/Kconfig | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > > index f467eca2be..e3df8efa7e 100644 > > --- a/common/spl/Kconfig > > +++ b/common/spl/Kconfig > > @@ -452,6 +452,12 @@ config SPL_DMA_SUPPORT > > the CPU moving the data. Enable this option to build the > > drivers in drivers/dma as part of an SPL build. > > > > +config SPL_DM_GPIO > > + bool "Support Driver Model GPIO drivers" > > + depends on SPL_GPIO_SUPPORT && DM_GPIO > > + help > > + Enable support for Driver Model based GPIO drivers in SPL. > > + > > config SPL_DRIVERS_MISC_SUPPORT > > bool "Support misc drivers" > > help > Regards, SImon [1] http://patchwork.ozlabs.org/patch/1167276/
Hi Simon, > Hi Lukasz, > > On Wed, 9 Oct 2019 at 03:02, Lukasz Majewski <lukma@denx.de> wrote: > > > > Dear Tom, > > > > > This define indicates if DM_GPIO shall be supported in SPL. This > > > allows proper operation of DM converted GPIO drivers in SPL, > > > which use boards. > > > > > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > > > --- > > > > > > Changes in v2: > > > - Add dependency on DM_GPIO > > > > > > > Tom, are there any issues preventing this patch from being applied > > to -master? > > This does not actually define DM_GPIO anywhere though, so this is > unused. The goal of this patch is to introduce in Kconfig a CONFIG_SPL_DM_GPIO. This define would be needed anyway, no matter if you perform the changes from [1]. This Kconfig define is necessary for the XEA board (i.MX28 based one), which uses OF_PLATDATA in SPL excessively to fit into size constraints. To be more precise the mxs_gpio.c driver uses #if CONFIG_IS_ENABLED(DM_GPIO) to provide DM GPIO support in SPL with OF_PLATDATA. > > As it happens I sent a similar patch[1], but it doesn't work. I'll > try again. It would be great if we could have [1] not causing build breaks. However, for my used case it would be enough to have the Kconfig definition of CONFIG_SPL_DM_GPIO (as I'm using OF_PLATDATA) with it. Simon, if you don't have time to do the fix for [1] I would opt for pulling this patch (to just add proper Kconfig define). > > > > > > common/spl/Kconfig | 6 ++++++ > > > 1 file changed, 6 insertions(+) > > > > > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > > > index f467eca2be..e3df8efa7e 100644 > > > --- a/common/spl/Kconfig > > > +++ b/common/spl/Kconfig > > > @@ -452,6 +452,12 @@ config SPL_DMA_SUPPORT > > > the CPU moving the data. Enable this option to build the > > > drivers in drivers/dma as part of an SPL build. > > > > > > +config SPL_DM_GPIO > > > + bool "Support Driver Model GPIO drivers" > > > + depends on SPL_GPIO_SUPPORT && DM_GPIO > > > + help > > > + Enable support for Driver Model based GPIO drivers in SPL. > > > + > > > config SPL_DRIVERS_MISC_SUPPORT > > > bool "Support misc drivers" > > > help > > > > Regards, > SImon > > [1] http://patchwork.ozlabs.org/patch/1167276/ Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Hi Lukasz, On Mon, 14 Oct 2019 at 06:41, Lukasz Majewski <lukma@denx.de> wrote: > > Hi Simon, > > > Hi Lukasz, > > > > On Wed, 9 Oct 2019 at 03:02, Lukasz Majewski <lukma@denx.de> wrote: > > > > > > Dear Tom, > > > > > > > This define indicates if DM_GPIO shall be supported in SPL. This > > > > allows proper operation of DM converted GPIO drivers in SPL, > > > > which use boards. > > > > > > > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > > > > --- > > > > > > > > Changes in v2: > > > > - Add dependency on DM_GPIO > > > > > > > > > > Tom, are there any issues preventing this patch from being applied > > > to -master? > > > > This does not actually define DM_GPIO anywhere though, so this is > > unused. > > The goal of this patch is to introduce in Kconfig a CONFIG_SPL_DM_GPIO. > This define would be needed anyway, no matter if you perform the > changes from [1]. > > This Kconfig define is necessary for the XEA board (i.MX28 based one), > which uses OF_PLATDATA in SPL excessively to fit into size constraints. > > To be more precise the mxs_gpio.c driver uses > #if CONFIG_IS_ENABLED(DM_GPIO) to provide DM GPIO support in SPL with > OF_PLATDATA. > > > > > > As it happens I sent a similar patch[1], but it doesn't work. I'll > > try again. > > It would be great if we could have [1] not causing build breaks. > However, for my used case it would be enough to have the Kconfig > definition of CONFIG_SPL_DM_GPIO (as I'm using OF_PLATDATA) with it. > > Simon, if you don't have time to do the fix for [1] I would opt for > pulling this patch (to just add proper Kconfig define). I have had a crack at this here: https://gitlab.denx.de/u-boot/custodians/u-boot-dm/commit/a6d15bbd9e4e7684dd47d21817df85915f28cbab I expect to send this series along with this patch at the end of this week. > > > > > > > > > > common/spl/Kconfig | 6 ++++++ > > > > 1 file changed, 6 insertions(+) > > > > > > > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > > > > index f467eca2be..e3df8efa7e 100644 > > > > --- a/common/spl/Kconfig > > > > +++ b/common/spl/Kconfig > > > > @@ -452,6 +452,12 @@ config SPL_DMA_SUPPORT > > > > the CPU moving the data. Enable this option to build the > > > > drivers in drivers/dma as part of an SPL build. > > > > > > > > +config SPL_DM_GPIO > > > > + bool "Support Driver Model GPIO drivers" > > > > + depends on SPL_GPIO_SUPPORT && DM_GPIO > > > > + help > > > > + Enable support for Driver Model based GPIO drivers in SPL. > > > > + > > > > config SPL_DRIVERS_MISC_SUPPORT > > > > bool "Support misc drivers" > > > > help > > > > > > > Regards, > > SImon > > > > [1] http://patchwork.ozlabs.org/patch/1167276/ > Regards, Simon
Hi Simon, > Hi Lukasz, > > On Mon, 14 Oct 2019 at 06:41, Lukasz Majewski <lukma@denx.de> wrote: > > > > Hi Simon, > > > > > Hi Lukasz, > > > > > > On Wed, 9 Oct 2019 at 03:02, Lukasz Majewski <lukma@denx.de> > > > wrote: > > > > > > > > Dear Tom, > > > > > > > > > This define indicates if DM_GPIO shall be supported in SPL. > > > > > This allows proper operation of DM converted GPIO drivers in > > > > > SPL, which use boards. > > > > > > > > > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > > > > > --- > > > > > > > > > > Changes in v2: > > > > > - Add dependency on DM_GPIO > > > > > > > > > > > > > Tom, are there any issues preventing this patch from being > > > > applied to -master? > > > > > > This does not actually define DM_GPIO anywhere though, so this is > > > unused. > > > > The goal of this patch is to introduce in Kconfig a > > CONFIG_SPL_DM_GPIO. This define would be needed anyway, no matter > > if you perform the changes from [1]. > > > > This Kconfig define is necessary for the XEA board (i.MX28 based > > one), which uses OF_PLATDATA in SPL excessively to fit into size > > constraints. > > > > To be more precise the mxs_gpio.c driver uses > > #if CONFIG_IS_ENABLED(DM_GPIO) to provide DM GPIO support in SPL > > with OF_PLATDATA. > > > > > > > > > > As it happens I sent a similar patch[1], but it doesn't work. I'll > > > try again. > > > > It would be great if we could have [1] not causing build breaks. > > However, for my used case it would be enough to have the Kconfig > > definition of CONFIG_SPL_DM_GPIO (as I'm using OF_PLATDATA) with it. > > > > Simon, if you don't have time to do the fix for [1] I would opt for > > pulling this patch (to just add proper Kconfig define). > > I have had a crack at this here: > > https://gitlab.denx.de/u-boot/custodians/u-boot-dm/commit/a6d15bbd9e4e7684dd47d21817df85915f28cbab > > I expect to send this series along with this patch at the end of this > week. If I may ask - have you made any progress on this? > > > > > > > > > > > > > > > common/spl/Kconfig | 6 ++++++ > > > > > 1 file changed, 6 insertions(+) > > > > > > > > > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > > > > > index f467eca2be..e3df8efa7e 100644 > > > > > --- a/common/spl/Kconfig > > > > > +++ b/common/spl/Kconfig > > > > > @@ -452,6 +452,12 @@ config SPL_DMA_SUPPORT > > > > > the CPU moving the data. Enable this option to build > > > > > the drivers in drivers/dma as part of an SPL build. > > > > > > > > > > +config SPL_DM_GPIO > > > > > + bool "Support Driver Model GPIO drivers" > > > > > + depends on SPL_GPIO_SUPPORT && DM_GPIO > > > > > + help > > > > > + Enable support for Driver Model based GPIO drivers in > > > > > SPL. + > > > > > config SPL_DRIVERS_MISC_SUPPORT > > > > > bool "Support misc drivers" > > > > > help > > > > > > > > > > Regards, > > > SImon > > > > > > [1] http://patchwork.ozlabs.org/patch/1167276/ > > > > Regards, > Simon Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Hi Simon, > Hi Simon, > > > Hi Lukasz, > > > > On Mon, 14 Oct 2019 at 06:41, Lukasz Majewski <lukma@denx.de> > > wrote: > > > > > > Hi Simon, > > > > > > > Hi Lukasz, > > > > > > > > On Wed, 9 Oct 2019 at 03:02, Lukasz Majewski <lukma@denx.de> > > > > wrote: > > > > > > > > > > Dear Tom, > > > > > > > > > > > This define indicates if DM_GPIO shall be supported in SPL. > > > > > > This allows proper operation of DM converted GPIO drivers in > > > > > > SPL, which use boards. > > > > > > > > > > > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > > > > > > --- > > > > > > > > > > > > Changes in v2: > > > > > > - Add dependency on DM_GPIO > > > > > > > > > > > > > > > > Tom, are there any issues preventing this patch from being > > > > > applied to -master? > > > > > > > > This does not actually define DM_GPIO anywhere though, so this > > > > is unused. > > > > > > The goal of this patch is to introduce in Kconfig a > > > CONFIG_SPL_DM_GPIO. This define would be needed anyway, no matter > > > if you perform the changes from [1]. > > > > > > This Kconfig define is necessary for the XEA board (i.MX28 based > > > one), which uses OF_PLATDATA in SPL excessively to fit into size > > > constraints. > > > > > > To be more precise the mxs_gpio.c driver uses > > > #if CONFIG_IS_ENABLED(DM_GPIO) to provide DM GPIO support in SPL > > > with OF_PLATDATA. > > > > > > > > > > > > > > As it happens I sent a similar patch[1], but it doesn't work. > > > > I'll try again. > > > > > > It would be great if we could have [1] not causing build breaks. > > > However, for my used case it would be enough to have the Kconfig > > > definition of CONFIG_SPL_DM_GPIO (as I'm using OF_PLATDATA) with > > > it. > > > > > > Simon, if you don't have time to do the fix for [1] I would opt > > > for pulling this patch (to just add proper Kconfig define). > > > > I have had a crack at this here: > > > > https://gitlab.denx.de/u-boot/custodians/u-boot-dm/commit/a6d15bbd9e4e7684dd47d21817df85915f28cbab > > > > I expect to send this series along with this patch at the end of > > this week. > > If I may ask - have you made any progress on this? In fact it blocks some i.MX28 related code (board to be precise) from sending it upstream as converted drivers expect SPL_DM_GPIO to be defined in Kconfig. In fact I do just need following code: https://patchwork.ozlabs.org/patch/1169013/ If you have some difficulties to solve (on e.g. other archs) then maybe it would be enough to pull the above patch? > > > > > > > > > > > > > > > > > > > > > common/spl/Kconfig | 6 ++++++ > > > > > > 1 file changed, 6 insertions(+) > > > > > > > > > > > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > > > > > > index f467eca2be..e3df8efa7e 100644 > > > > > > --- a/common/spl/Kconfig > > > > > > +++ b/common/spl/Kconfig > > > > > > @@ -452,6 +452,12 @@ config SPL_DMA_SUPPORT > > > > > > the CPU moving the data. Enable this option to build > > > > > > the drivers in drivers/dma as part of an SPL build. > > > > > > > > > > > > +config SPL_DM_GPIO > > > > > > + bool "Support Driver Model GPIO drivers" > > > > > > + depends on SPL_GPIO_SUPPORT && DM_GPIO > > > > > > + help > > > > > > + Enable support for Driver Model based GPIO drivers > > > > > > in SPL. + > > > > > > config SPL_DRIVERS_MISC_SUPPORT > > > > > > bool "Support misc drivers" > > > > > > help > > > > > > > > > > > > > Regards, > > > > SImon > > > > > > > > [1] http://patchwork.ozlabs.org/patch/1167276/ > > > > > > > Regards, > > Simon > > Best regards, > > Lukasz Majewski > > -- > > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: > lukma@denx.de Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Hi Lukasz, On Sun, 17 Nov 2019 at 13:54, Lukasz Majewski <lukma@denx.de> wrote: > > Hi Simon, > > > Hi Simon, > > > > > Hi Lukasz, > > > > > > On Mon, 14 Oct 2019 at 06:41, Lukasz Majewski <lukma@denx.de> > > > wrote: > > > > > > > > Hi Simon, > > > > > > > > > Hi Lukasz, > > > > > > > > > > On Wed, 9 Oct 2019 at 03:02, Lukasz Majewski <lukma@denx.de> > > > > > wrote: > > > > > > > > > > > > Dear Tom, > > > > > > > > > > > > > This define indicates if DM_GPIO shall be supported in SPL. > > > > > > > This allows proper operation of DM converted GPIO drivers in > > > > > > > SPL, which use boards. > > > > > > > > > > > > > > Signed-off-by: Lukasz Majewski <lukma@denx.de> > > > > > > > --- > > > > > > > > > > > > > > Changes in v2: > > > > > > > - Add dependency on DM_GPIO > > > > > > > > > > > > > > > > > > > Tom, are there any issues preventing this patch from being > > > > > > applied to -master? > > > > > > > > > > This does not actually define DM_GPIO anywhere though, so this > > > > > is unused. > > > > > > > > The goal of this patch is to introduce in Kconfig a > > > > CONFIG_SPL_DM_GPIO. This define would be needed anyway, no matter > > > > if you perform the changes from [1]. > > > > > > > > This Kconfig define is necessary for the XEA board (i.MX28 based > > > > one), which uses OF_PLATDATA in SPL excessively to fit into size > > > > constraints. > > > > > > > > To be more precise the mxs_gpio.c driver uses > > > > #if CONFIG_IS_ENABLED(DM_GPIO) to provide DM GPIO support in SPL > > > > with OF_PLATDATA. > > > > > > > > > > > > > > > > > > As it happens I sent a similar patch[1], but it doesn't work. > > > > > I'll try again. > > > > > > > > It would be great if we could have [1] not causing build breaks. > > > > However, for my used case it would be enough to have the Kconfig > > > > definition of CONFIG_SPL_DM_GPIO (as I'm using OF_PLATDATA) with > > > > it. > > > > > > > > Simon, if you don't have time to do the fix for [1] I would opt > > > > for pulling this patch (to just add proper Kconfig define). > > > > > > I have had a crack at this here: > > > > > > https://gitlab.denx.de/u-boot/custodians/u-boot-dm/commit/a6d15bbd9e4e7684dd47d21817df85915f28cbab > > > > > > I expect to send this series along with this patch at the end of > > > this week. > > > > If I may ask - have you made any progress on this? > > In fact it blocks some i.MX28 related code (board to be precise) from > sending it upstream as converted drivers expect SPL_DM_GPIO to be > defined in Kconfig. > > In fact I do just need following code: > https://patchwork.ozlabs.org/patch/1169013/ > > If you have some difficulties to solve (on e.g. other archs) then maybe > it would be enough to pull the above patch? Just getting back to this, but see U-Boot next which has the full patch now. Regards, Simon
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index f467eca2be..e3df8efa7e 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -452,6 +452,12 @@ config SPL_DMA_SUPPORT the CPU moving the data. Enable this option to build the drivers in drivers/dma as part of an SPL build. +config SPL_DM_GPIO + bool "Support Driver Model GPIO drivers" + depends on SPL_GPIO_SUPPORT && DM_GPIO + help + Enable support for Driver Model based GPIO drivers in SPL. + config SPL_DRIVERS_MISC_SUPPORT bool "Support misc drivers" help
This define indicates if DM_GPIO shall be supported in SPL. This allows proper operation of DM converted GPIO drivers in SPL, which use boards. Signed-off-by: Lukasz Majewski <lukma@denx.de> --- Changes in v2: - Add dependency on DM_GPIO common/spl/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+)