| Message ID | 20191030112726.13106-4-daniel@dd-wrt.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | ipq40xx: Add new device Compex WPJ419 | expand |
Hi, just some cosmetical drive-by comments below: ... > diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base- > files/etc/hotplug.d/firmware/11-ath10k-caldata > index 2336ef3c7b..b18d17e422 100644 > --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata > +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata > @@ -71,6 +71,7 @@ case "$FIRMWARE" in > /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev > "urlader1") > ;; > compex,wpj428 |\ > + compex,wpj419 |\ Please apply correct alphabetic sorting. > engenius,eap1300 |\ > openmesh,a42 |\ > openmesh,a62 |\ > @@ -134,6 +135,7 @@ case "$FIRMWARE" in > /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev > "urlader1") > ;; > compex,wpj428 |\ > + compex,wpj419 |\ Please apply correct alphabetic sorting. > engenius,eap1300 |\ > openmesh,a42 |\ > openmesh,a62 |\ > diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 > index 8948b73ff7..3ee921abed 100644 > --- a/target/linux/ipq40xx/config-4.19 > +++ b/target/linux/ipq40xx/config-4.19 > @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y > CONFIG_MTD_NAND_QCOM=y > CONFIG_MTD_SPI_NAND=y > CONFIG_MTD_SPI_NOR=y > +CONFIG_MTD_SPINAND_MT29F=y > +CONFIG_MTD_SPINAND_GIGADEVICE=y > +CONFIG_MTD_SPINAND_ONDIEECC=y > CONFIG_MTD_SPLIT_FIRMWARE=y > CONFIG_MTD_SPLIT_FIT_FW=y > CONFIG_MTD_UBI=y > diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi b/target/linux/ipq40xx/files- > 4.19/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi > new file mode 100644 > index 0000000000..169505973f > --- /dev/null > +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi > @@ -0,0 +1,1142 @@ > +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. > + * > + * Permission to use, copy, modify, and/or distribute this software for any > + * purpose with or without fee is hereby granted, provided that the above > + * copyright notice and this permission notice appear in all copies. > + * > + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES > + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF > + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR > + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES > + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > + * > + */ > + > +#include <dt-bindings/msm/msm-bus-ids.h> > + > +/ { > + > +soc { Child nodes (=soc) should be indented. > + ad_hoc_bus: ad-hoc-bus { > + compatible = "qcom,msm-bus-device"; ... > diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files- > 4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > new file mode 100644 > index 0000000000..5553bbd166 > --- /dev/null > +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > @@ -0,0 +1,371 @@ ... > +&gmac0 { > +qcom,phy_mdio_addr = <4>; > +qcom,poll_required = <1>; > +qcom,forced_speed = <1000>; > +qcom,forced_duplex = <1>; > +vlan_tag = <2 0x20>; > +}; > + > +&gmac1 { > +qcom,phy_mdio_addr = <3>; > +qcom,poll_required = <1>; > +qcom,forced_speed = <1000>; > +qcom,forced_duplex = <1>; > +vlan_tag = <1 0x10>; > +}; > + > +&wifi0 { > +status = "okay"; > +}; > + > +&wifi1 { > +status = "okay"; > +}; Fix indent for the content of the four nodes above. > diff --git a/target/linux/ipq40xx/files-4.19/include/dt-bindings/msm/msm-bus-ids.h b/target/linux/ipq40xx/files-4.19/include/dt- > bindings/msm/msm-bus-ids.h > new file mode 100644 > index 0000000000..da0b83e831 > --- /dev/null > +++ b/target/linux/ipq40xx/files-4.19/include/dt-bindings/msm/msm-bus-ids.h ... > +#define MSM_BUS_SLAVE_CATS_128 663 > +#define MSM_BUS_SLAVE_OCMEM_64 664 > +#define MSM_BUS_SLAVE_PCIE_0 665 > +#define MSM_BUS_SLAVE_PCIE_1 666 Mixed indent here ... ... > +#define MSM_BUS_SLAVE_SRVC_SNOC 754 > + > +#define MSM_BUS_SYSTEM_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB > +#define MSM_BUS_CPSS_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_CPSS_FPB and here. ... > diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile > index ed46bca649..a13a17b3cf 100644 > --- a/target/linux/ipq40xx/image/Makefile > +++ b/target/linux/ipq40xx/image/Makefile > @@ -179,6 +179,20 @@ define Device/compex_wpj428 > endef > TARGET_DEVICES += compex_wpj428 > > +define Device/compex_wpj419 > + $(call Device/FitImage) > + $(call Device/UbiFit) > + DEVICE_VENDOR := Compex > + DEVICE_MODEL := WPJ419 > + DEVICE_DTS := qcom-ipq4019-wpj419 > + DEVICE_DTS_CONFIG := config@12 > + KERNEL_INSTALL := 1 > + BLOCKSIZE := 128k > + PAGESIZE := 2048 > + FILESYSTEMS := squashfs > +endef > +TARGET_DEVICES += compex_wpj419 Please use correct sorting for the node (before wpj428). IMAGE_SIZE is missing compared to wpj428, I have not checked whether it is required. Best Adrian
On 10/30/19 4:27 AM, Daniel Danzberger wrote: > This device contains 2 flash devices. One NOR (32M) and one NAND (128M). > U-boot and caldata are on the NOR, the firmware on the NAND. > > SoC: IPQ4019 > CPU: 4x 710MHz ARMv7 > RAM: 256MB > FLASH: NOR:32MB NAND:128MB > > [...] > > .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ The sudden appearance of a need the MSM bus and its IDs worries me. With 25 devices already on the ipq40xx platform without them, it feels like something is missing if they are needed by this one. > diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 > index 8948b73ff7..3ee921abed 100644 > --- a/target/linux/ipq40xx/config-4.19 > +++ b/target/linux/ipq40xx/config-4.19 > @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y > CONFIG_MTD_NAND_QCOM=y > CONFIG_MTD_SPI_NAND=y > CONFIG_MTD_SPI_NOR=y > +CONFIG_MTD_SPINAND_MT29F=y > +CONFIG_MTD_SPINAND_GIGADEVICE=y > +CONFIG_MTD_SPINAND_ONDIEECC=y The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND > CONFIG_MTD_SPLIT_FIRMWARE=y > CONFIG_MTD_SPLIT_FIT_FW=y > CONFIG_MTD_UBI=y > > [...] > > diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > new file mode 100644 > index 0000000000..5553bbd166 > --- /dev/null > +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > @@ -0,0 +1,371 @@ > +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. > + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> > + * > + * Permission to use, copy, modify, and/or distribute this software for any > + * purpose with or without fee is hereby granted, provided that the above > + * copyright notice and this permission notice appear in all copies. > + * > + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES > + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF > + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR > + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES > + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > + * > + */ > + > > [...] > > + > + spi_0: spi@78b5000 { > + pinctrl-0 = <&spi_0_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; > + num-cs = <2>; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0>; > + linux,modalias = "m25p80", "n25q128a11"; > + compatible = "jedec,spi-nor", "n25q128a11"; > + spi-max-frequency = <24000000>; I don't think you need linux,modalias here, nor the chip type in the compatible line. I believe that the following compatible line is sufficient compatible = "jedec,spi-nor"; You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", or the like, rather than a chip-specific name. (I'm not a committer.) > + > + partitions { > + compatible = "fixed-partitions"; > + > + partition@0 { > + label = "0:SBL1"; > + reg = <0x000000 0x040000>; > + read-only; > + }; > + > + partition@40000 { > + label = "0:MIBIB"; > + reg = <0x040000 0x020000>; > + read-only; > + }; > + > + partition@60000 { > + label = "0:QSEE"; > + reg = <0x060000 0x060000>; > + read-only; > + }; > + > + partition@c0000 { > + label = "0:CDT"; > + reg = <0x0c0000 0x010000>; > + read-only; > + }; Someone may rip on you for capitalization of labels. (I'm not a committer.) > + > + partition@d0000 { > + label = "0:DDRPARAMS"; > + reg = <0x0d0000 0x010000>; > + read-only; > + }; > + > + partition@e0000 { > + label = "u-boot-env"; > + reg = <0x0e0000 0x010000>; > + read-only; > + }; U-Boot environment may want/need to be writable > + > + partition@f0000 { > + label = "u-boot"; > + reg = <0x0f0000 0x080000>; > + read-only; > + }; > + > + partition@170000 { > + label = "art"; > + reg = <0x170000 0x010000>; > + read-only; > + }; > + }; > + }; > + > + mt29f@1 { > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <1>; > + status = "okay"; > + compatible = "spinand,mt29f"; > + spi-max-frequency = <24000000>; Same comment on "mt29f" vs. something generic and descriptive. Converting to the upstream SPI-NAND driver here should be as simple as compatible = "spi-nand"; > + > + partitions { > + compatible = "fixed-partitions"; > + > + partition@0 { > + label = "ubi"; > + reg = <0x0000000 0x8000000>; > + }; > + }; > + }; > + }; > + > [...]
Hi, > > + m25p80@0 { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + reg = <0>; > > + linux,modalias = "m25p80", "n25q128a11"; > > + compatible = "jedec,spi-nor", "n25q128a11"; > > + spi-max-frequency = <24000000>; > > > I don't think you need linux,modalias here, nor the chip type in the > compatible line. > I believe that the following compatible line is sufficient > > compatible = "jedec,spi-nor"; > > > You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", > or the like, rather than a chip-specific name. (I'm not a committer.) Indeed. Best Adrian
Using 'compatible = "spi-nand"' worked and the device got detected by the driver. However it won't create and "rootfs" partition like it did before. --- [ 1.901930] spi-nand spi0.1: GigaDevice SPI NAND was found. [ 1.905266] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128 [ 1.911015] 1 fixed-partitions partitions found on MTD device spi0.1 [ 1.919010] Creating 1 MTD partitions on "spi0.1": [ 1.925410] 0x000000000000-0x000008000000 : "ubi" --- On 10/30/19 4:51 PM, Jeff Kletsky wrote: > On 10/30/19 4:27 AM, Daniel Danzberger wrote: > >> This device contains 2 flash devices. One NOR (32M) and one NAND (128M). >> U-boot and caldata are on the NOR, the firmware on the NAND. >> >> SoC: IPQ4019 >> CPU: 4x 710MHz ARMv7 >> RAM: 256MB >> FLASH: NOR:32MB NAND:128MB >> >> [...] >> >> > > .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ > .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ > > The sudden appearance of a need the MSM bus and its IDs worries me. > > With 25 devices already on the ipq40xx platform without them, it feels > like something is missing if they are needed by this one. > > >> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 >> index 8948b73ff7..3ee921abed 100644 >> --- a/target/linux/ipq40xx/config-4.19 >> +++ b/target/linux/ipq40xx/config-4.19 >> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y >> CONFIG_MTD_NAND_QCOM=y >> CONFIG_MTD_SPI_NAND=y >> CONFIG_MTD_SPI_NOR=y >> +CONFIG_MTD_SPINAND_MT29F=y >> +CONFIG_MTD_SPINAND_GIGADEVICE=y >> +CONFIG_MTD_SPINAND_ONDIEECC=y > > > The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND > > >> CONFIG_MTD_SPLIT_FIRMWARE=y >> CONFIG_MTD_SPLIT_FIT_FW=y >> CONFIG_MTD_UBI=y >> >> [...] >> >> diff --git >> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >> new file mode 100644 >> index 0000000000..5553bbd166 >> --- /dev/null >> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >> @@ -0,0 +1,371 @@ >> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. >> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> >> + * >> + * Permission to use, copy, modify, and/or distribute this software for any >> + * purpose with or without fee is hereby granted, provided that the above >> + * copyright notice and this permission notice appear in all copies. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES >> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF >> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR >> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES >> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN >> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF >> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. >> + * >> + */ >> + >> >> [...] >> >> + >> + spi_0: spi@78b5000 { >> + pinctrl-0 = <&spi_0_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; >> + num-cs = <2>; >> + >> + m25p80@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + reg = <0>; >> + linux,modalias = "m25p80", "n25q128a11"; >> + compatible = "jedec,spi-nor", "n25q128a11"; >> + spi-max-frequency = <24000000>; > > > I don't think you need linux,modalias here, nor the chip type in the compatible > line. > I believe that the following compatible line is sufficient > > compatible = "jedec,spi-nor"; > > > You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", > or the like, rather than a chip-specific name. (I'm not a committer.) > > >> + >> + partitions { >> + compatible = "fixed-partitions"; >> + >> + partition@0 { >> + label = "0:SBL1"; >> + reg = <0x000000 0x040000>; >> + read-only; >> + }; >> + >> + partition@40000 { >> + label = "0:MIBIB"; >> + reg = <0x040000 0x020000>; >> + read-only; >> + }; >> + >> + partition@60000 { >> + label = "0:QSEE"; >> + reg = <0x060000 0x060000>; >> + read-only; >> + }; >> + >> + partition@c0000 { >> + label = "0:CDT"; >> + reg = <0x0c0000 0x010000>; >> + read-only; >> + }; > > > Someone may rip on you for capitalization of labels. (I'm not a committer.) > > >> + >> + partition@d0000 { >> + label = "0:DDRPARAMS"; >> + reg = <0x0d0000 0x010000>; >> + read-only; >> + }; >> + >> + partition@e0000 { >> + label = "u-boot-env"; >> + reg = <0x0e0000 0x010000>; >> + read-only; >> + }; > > > U-Boot environment may want/need to be writable > > >> + >> + partition@f0000 { >> + label = "u-boot"; >> + reg = <0x0f0000 0x080000>; >> + read-only; >> + }; >> + >> + partition@170000 { >> + label = "art"; >> + reg = <0x170000 0x010000>; >> + read-only; >> + }; >> + }; >> + }; >> + >> + mt29f@1 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + reg = <1>; >> + status = "okay"; >> + compatible = "spinand,mt29f"; >> + spi-max-frequency = <24000000>; > > > Same comment on "mt29f" vs. something generic and descriptive. > > > Converting to the upstream SPI-NAND driver here should be as simple as > > compatible = "spi-nand"; > > > >> + >> + partitions { >> + compatible = "fixed-partitions"; >> + >> + partition@0 { >> + label = "ubi"; >> + reg = <0x0000000 0x8000000>; >> + }; >> + }; >> + }; >> + }; >> + >> [...] > >
On Thu, 31 Oct 2019 at 11:17, Daniel Danzberger <daniel@dd-wrt.com> wrote: > > Using 'compatible = "spi-nand"' worked and the device got detected by the > driver. However it won't create and "rootfs" partition like it did before. > > --- > [ 1.901930] spi-nand spi0.1: GigaDevice SPI NAND was found. > [ 1.905266] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, > OOB size: 128 > [ 1.911015] 1 fixed-partitions partitions found on MTD device spi0.1 > [ 1.919010] Creating 1 MTD partitions on "spi0.1": > [ 1.925410] 0x000000000000-0x000008000000 : "ubi" It creates the partitions like set in DTS, ubi partition contains both kernel and rootfs. > --- > > > On 10/30/19 4:51 PM, Jeff Kletsky wrote: > > On 10/30/19 4:27 AM, Daniel Danzberger wrote: > > > >> This device contains 2 flash devices. One NOR (32M) and one NAND (128M). > >> U-boot and caldata are on the NOR, the firmware on the NAND. > >> > >> SoC: IPQ4019 > >> CPU: 4x 710MHz ARMv7 > >> RAM: 256MB > >> FLASH: NOR:32MB NAND:128MB > >> > >> [...] > >> > >> > > > > .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ > > .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ > > > > The sudden appearance of a need the MSM bus and its IDs worries me. > > > > With 25 devices already on the ipq40xx platform without them, it feels > > like something is missing if they are needed by this one. > > > > > >> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 > >> index 8948b73ff7..3ee921abed 100644 > >> --- a/target/linux/ipq40xx/config-4.19 > >> +++ b/target/linux/ipq40xx/config-4.19 > >> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y > >> CONFIG_MTD_NAND_QCOM=y > >> CONFIG_MTD_SPI_NAND=y > >> CONFIG_MTD_SPI_NOR=y > >> +CONFIG_MTD_SPINAND_MT29F=y > >> +CONFIG_MTD_SPINAND_GIGADEVICE=y > >> +CONFIG_MTD_SPINAND_ONDIEECC=y > > > > > > The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND > > > > > >> CONFIG_MTD_SPLIT_FIRMWARE=y > >> CONFIG_MTD_SPLIT_FIT_FW=y > >> CONFIG_MTD_UBI=y > >> > >> [...] > >> > >> diff --git > >> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >> new file mode 100644 > >> index 0000000000..5553bbd166 > >> --- /dev/null > >> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >> @@ -0,0 +1,371 @@ > >> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. > >> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> > >> + * > >> + * Permission to use, copy, modify, and/or distribute this software for any > >> + * purpose with or without fee is hereby granted, provided that the above > >> + * copyright notice and this permission notice appear in all copies. > >> + * > >> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES > >> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF > >> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR > >> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES > >> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > >> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > >> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > >> + * > >> + */ > >> + > >> > >> [...] > >> > >> + > >> + spi_0: spi@78b5000 { > >> + pinctrl-0 = <&spi_0_pins>; > >> + pinctrl-names = "default"; > >> + status = "okay"; > >> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; > >> + num-cs = <2>; > >> + > >> + m25p80@0 { > >> + #address-cells = <1>; > >> + #size-cells = <1>; > >> + reg = <0>; > >> + linux,modalias = "m25p80", "n25q128a11"; > >> + compatible = "jedec,spi-nor", "n25q128a11"; > >> + spi-max-frequency = <24000000>; > > > > > > I don't think you need linux,modalias here, nor the chip type in the compatible > > line. > > I believe that the following compatible line is sufficient > > > > compatible = "jedec,spi-nor"; > > > > > > You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", > > or the like, rather than a chip-specific name. (I'm not a committer.) > > > > > >> + > >> + partitions { > >> + compatible = "fixed-partitions"; > >> + > >> + partition@0 { > >> + label = "0:SBL1"; > >> + reg = <0x000000 0x040000>; > >> + read-only; > >> + }; > >> + > >> + partition@40000 { > >> + label = "0:MIBIB"; > >> + reg = <0x040000 0x020000>; > >> + read-only; > >> + }; > >> + > >> + partition@60000 { > >> + label = "0:QSEE"; > >> + reg = <0x060000 0x060000>; > >> + read-only; > >> + }; > >> + > >> + partition@c0000 { > >> + label = "0:CDT"; > >> + reg = <0x0c0000 0x010000>; > >> + read-only; > >> + }; > > > > > > Someone may rip on you for capitalization of labels. (I'm not a committer.) > > > > > >> + > >> + partition@d0000 { > >> + label = "0:DDRPARAMS"; > >> + reg = <0x0d0000 0x010000>; > >> + read-only; > >> + }; > >> + > >> + partition@e0000 { > >> + label = "u-boot-env"; > >> + reg = <0x0e0000 0x010000>; > >> + read-only; > >> + }; > > > > > > U-Boot environment may want/need to be writable > > > > > >> + > >> + partition@f0000 { > >> + label = "u-boot"; > >> + reg = <0x0f0000 0x080000>; > >> + read-only; > >> + }; > >> + > >> + partition@170000 { > >> + label = "art"; > >> + reg = <0x170000 0x010000>; > >> + read-only; > >> + }; > >> + }; > >> + }; > >> + > >> + mt29f@1 { > >> + #address-cells = <1>; > >> + #size-cells = <1>; > >> + reg = <1>; > >> + status = "okay"; > >> + compatible = "spinand,mt29f"; > >> + spi-max-frequency = <24000000>; > > > > > > Same comment on "mt29f" vs. something generic and descriptive. > > > > > > Converting to the upstream SPI-NAND driver here should be as simple as > > > > compatible = "spi-nand"; > > > > > > > >> + > >> + partitions { > >> + compatible = "fixed-partitions"; > >> + > >> + partition@0 { > >> + label = "ubi"; > >> + reg = <0x0000000 0x8000000>; > >> + }; > >> + }; > >> + }; > >> + }; > >> + > >> [...] > > > > > > -- > Regards > > Daniel Danzberger > embeDD GmbH, Alter Postplatz 2, CH-6370 Stans > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
On the deprecated staging driver, it somehow directly came up as "rootfs" and not "ubi". Even though it has been named "ubi" in the dts. Now the image won't boot because no rootfs is detected: ---- [ 1.919001] Creating 1 MTD partitions on "spi0.1": [ 1.925399] 0x000000000000-0x000008000000 : "ubi" [ 1.940324] random: fast init done ... [ 3.170978] UBI error: cannot open mtd rootfs, error -2 [ 3.171027] hctosys: unable to open rtc device ([ 3.180802] Waiting for root device /dev/ubiblock0_1... ---- On 10/31/19 11:19 AM, Robert Marko wrote: > On Thu, 31 Oct 2019 at 11:17, Daniel Danzberger <daniel@dd-wrt.com> wrote: >> >> Using 'compatible = "spi-nand"' worked and the device got detected by the >> driver. However it won't create and "rootfs" partition like it did before. >> >> --- >> [ 1.901930] spi-nand spi0.1: GigaDevice SPI NAND was found. >> [ 1.905266] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, >> OOB size: 128 >> [ 1.911015] 1 fixed-partitions partitions found on MTD device spi0.1 >> [ 1.919010] Creating 1 MTD partitions on "spi0.1": >> [ 1.925410] 0x000000000000-0x000008000000 : "ubi" > It creates the partitions like set in DTS, ubi partition contains both > kernel and rootfs. >> --- >> >> >> On 10/30/19 4:51 PM, Jeff Kletsky wrote: >>> On 10/30/19 4:27 AM, Daniel Danzberger wrote: >>> >>>> This device contains 2 flash devices. One NOR (32M) and one NAND (128M). >>>> U-boot and caldata are on the NOR, the firmware on the NAND. >>>> >>>> SoC: IPQ4019 >>>> CPU: 4x 710MHz ARMv7 >>>> RAM: 256MB >>>> FLASH: NOR:32MB NAND:128MB >>>> >>>> [...] >>>> >>>> >>> >>> .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ >>> .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ >>> >>> The sudden appearance of a need the MSM bus and its IDs worries me. >>> >>> With 25 devices already on the ipq40xx platform without them, it feels >>> like something is missing if they are needed by this one. >>> >>> >>>> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 >>>> index 8948b73ff7..3ee921abed 100644 >>>> --- a/target/linux/ipq40xx/config-4.19 >>>> +++ b/target/linux/ipq40xx/config-4.19 >>>> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y >>>> CONFIG_MTD_NAND_QCOM=y >>>> CONFIG_MTD_SPI_NAND=y >>>> CONFIG_MTD_SPI_NOR=y >>>> +CONFIG_MTD_SPINAND_MT29F=y >>>> +CONFIG_MTD_SPINAND_GIGADEVICE=y >>>> +CONFIG_MTD_SPINAND_ONDIEECC=y >>> >>> >>> The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND >>> >>> >>>> CONFIG_MTD_SPLIT_FIRMWARE=y >>>> CONFIG_MTD_SPLIT_FIT_FW=y >>>> CONFIG_MTD_UBI=y >>>> >>>> [...] >>>> >>>> diff --git >>>> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>> new file mode 100644 >>>> index 0000000000..5553bbd166 >>>> --- /dev/null >>>> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>> @@ -0,0 +1,371 @@ >>>> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. >>>> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> >>>> + * >>>> + * Permission to use, copy, modify, and/or distribute this software for any >>>> + * purpose with or without fee is hereby granted, provided that the above >>>> + * copyright notice and this permission notice appear in all copies. >>>> + * >>>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES >>>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF >>>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR >>>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES >>>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN >>>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF >>>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. >>>> + * >>>> + */ >>>> + >>>> >>>> [...] >>>> >>>> + >>>> + spi_0: spi@78b5000 { >>>> + pinctrl-0 = <&spi_0_pins>; >>>> + pinctrl-names = "default"; >>>> + status = "okay"; >>>> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; >>>> + num-cs = <2>; >>>> + >>>> + m25p80@0 { >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + reg = <0>; >>>> + linux,modalias = "m25p80", "n25q128a11"; >>>> + compatible = "jedec,spi-nor", "n25q128a11"; >>>> + spi-max-frequency = <24000000>; >>> >>> >>> I don't think you need linux,modalias here, nor the chip type in the compatible >>> line. >>> I believe that the following compatible line is sufficient >>> >>> compatible = "jedec,spi-nor"; >>> >>> >>> You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", >>> or the like, rather than a chip-specific name. (I'm not a committer.) >>> >>> >>>> + >>>> + partitions { >>>> + compatible = "fixed-partitions"; >>>> + >>>> + partition@0 { >>>> + label = "0:SBL1"; >>>> + reg = <0x000000 0x040000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@40000 { >>>> + label = "0:MIBIB"; >>>> + reg = <0x040000 0x020000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@60000 { >>>> + label = "0:QSEE"; >>>> + reg = <0x060000 0x060000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@c0000 { >>>> + label = "0:CDT"; >>>> + reg = <0x0c0000 0x010000>; >>>> + read-only; >>>> + }; >>> >>> >>> Someone may rip on you for capitalization of labels. (I'm not a committer.) >>> >>> >>>> + >>>> + partition@d0000 { >>>> + label = "0:DDRPARAMS"; >>>> + reg = <0x0d0000 0x010000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@e0000 { >>>> + label = "u-boot-env"; >>>> + reg = <0x0e0000 0x010000>; >>>> + read-only; >>>> + }; >>> >>> >>> U-Boot environment may want/need to be writable >>> >>> >>>> + >>>> + partition@f0000 { >>>> + label = "u-boot"; >>>> + reg = <0x0f0000 0x080000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@170000 { >>>> + label = "art"; >>>> + reg = <0x170000 0x010000>; >>>> + read-only; >>>> + }; >>>> + }; >>>> + }; >>>> + >>>> + mt29f@1 { >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + reg = <1>; >>>> + status = "okay"; >>>> + compatible = "spinand,mt29f"; >>>> + spi-max-frequency = <24000000>; >>> >>> >>> Same comment on "mt29f" vs. something generic and descriptive. >>> >>> >>> Converting to the upstream SPI-NAND driver here should be as simple as >>> >>> compatible = "spi-nand"; >>> >>> >>> >>>> + >>>> + partitions { >>>> + compatible = "fixed-partitions"; >>>> + >>>> + partition@0 { >>>> + label = "ubi"; >>>> + reg = <0x0000000 0x8000000>; >>>> + }; >>>> + }; >>>> + }; >>>> + }; >>>> + >>>> [...] >>> >>> >> >> -- >> Regards >> >> Daniel Danzberger >> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >
On Thu, 31 Oct 2019 at 11:25, Daniel Danzberger <daniel@dd-wrt.com> wrote: > > On the deprecated staging driver, it somehow directly came up as "rootfs" and > not "ubi". Even though it has been named "ubi" in the dts. > Now the image won't boot because no rootfs is detected: > > ---- > [ 1.919001] Creating 1 MTD partitions on "spi0.1": > [ 1.925399] 0x000000000000-0x000008000000 : "ubi" > [ 1.940324] random: fast init done > ... > [ 3.170978] UBI error: cannot open mtd rootfs, error -2 > [ 3.171027] hctosys: unable to open rtc device ([ 3.180802] Waiting for > root device /dev/ubiblock0_1... This is due to your bootargs, you can either use bootargs-append to set rootfs to ubi or change them in bootloader. This is classic on boards derived from QCA reference designs > ---- > > > On 10/31/19 11:19 AM, Robert Marko wrote: > > On Thu, 31 Oct 2019 at 11:17, Daniel Danzberger <daniel@dd-wrt.com> wrote: > >> > >> Using 'compatible = "spi-nand"' worked and the device got detected by the > >> driver. However it won't create and "rootfs" partition like it did before. > >> > >> --- > >> [ 1.901930] spi-nand spi0.1: GigaDevice SPI NAND was found. > >> [ 1.905266] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, > >> OOB size: 128 > >> [ 1.911015] 1 fixed-partitions partitions found on MTD device spi0.1 > >> [ 1.919010] Creating 1 MTD partitions on "spi0.1": > >> [ 1.925410] 0x000000000000-0x000008000000 : "ubi" > > It creates the partitions like set in DTS, ubi partition contains both > > kernel and rootfs. > >> --- > >> > >> > >> On 10/30/19 4:51 PM, Jeff Kletsky wrote: > >>> On 10/30/19 4:27 AM, Daniel Danzberger wrote: > >>> > >>>> This device contains 2 flash devices. One NOR (32M) and one NAND (128M). > >>>> U-boot and caldata are on the NOR, the firmware on the NAND. > >>>> > >>>> SoC: IPQ4019 > >>>> CPU: 4x 710MHz ARMv7 > >>>> RAM: 256MB > >>>> FLASH: NOR:32MB NAND:128MB > >>>> > >>>> [...] > >>>> > >>>> > >>> > >>> .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ > >>> .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ > >>> > >>> The sudden appearance of a need the MSM bus and its IDs worries me. > >>> > >>> With 25 devices already on the ipq40xx platform without them, it feels > >>> like something is missing if they are needed by this one. > >>> > >>> > >>>> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 > >>>> index 8948b73ff7..3ee921abed 100644 > >>>> --- a/target/linux/ipq40xx/config-4.19 > >>>> +++ b/target/linux/ipq40xx/config-4.19 > >>>> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y > >>>> CONFIG_MTD_NAND_QCOM=y > >>>> CONFIG_MTD_SPI_NAND=y > >>>> CONFIG_MTD_SPI_NOR=y > >>>> +CONFIG_MTD_SPINAND_MT29F=y > >>>> +CONFIG_MTD_SPINAND_GIGADEVICE=y > >>>> +CONFIG_MTD_SPINAND_ONDIEECC=y > >>> > >>> > >>> The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND > >>> > >>> > >>>> CONFIG_MTD_SPLIT_FIRMWARE=y > >>>> CONFIG_MTD_SPLIT_FIT_FW=y > >>>> CONFIG_MTD_UBI=y > >>>> > >>>> [...] > >>>> > >>>> diff --git > >>>> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >>>> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >>>> new file mode 100644 > >>>> index 0000000000..5553bbd166 > >>>> --- /dev/null > >>>> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >>>> @@ -0,0 +1,371 @@ > >>>> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. > >>>> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> > >>>> + * > >>>> + * Permission to use, copy, modify, and/or distribute this software for any > >>>> + * purpose with or without fee is hereby granted, provided that the above > >>>> + * copyright notice and this permission notice appear in all copies. > >>>> + * > >>>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES > >>>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF > >>>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR > >>>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES > >>>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > >>>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > >>>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > >>>> + * > >>>> + */ > >>>> + > >>>> > >>>> [...] > >>>> > >>>> + > >>>> + spi_0: spi@78b5000 { > >>>> + pinctrl-0 = <&spi_0_pins>; > >>>> + pinctrl-names = "default"; > >>>> + status = "okay"; > >>>> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; > >>>> + num-cs = <2>; > >>>> + > >>>> + m25p80@0 { > >>>> + #address-cells = <1>; > >>>> + #size-cells = <1>; > >>>> + reg = <0>; > >>>> + linux,modalias = "m25p80", "n25q128a11"; > >>>> + compatible = "jedec,spi-nor", "n25q128a11"; > >>>> + spi-max-frequency = <24000000>; > >>> > >>> > >>> I don't think you need linux,modalias here, nor the chip type in the compatible > >>> line. > >>> I believe that the following compatible line is sufficient > >>> > >>> compatible = "jedec,spi-nor"; > >>> > >>> > >>> You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", > >>> or the like, rather than a chip-specific name. (I'm not a committer.) > >>> > >>> > >>>> + > >>>> + partitions { > >>>> + compatible = "fixed-partitions"; > >>>> + > >>>> + partition@0 { > >>>> + label = "0:SBL1"; > >>>> + reg = <0x000000 0x040000>; > >>>> + read-only; > >>>> + }; > >>>> + > >>>> + partition@40000 { > >>>> + label = "0:MIBIB"; > >>>> + reg = <0x040000 0x020000>; > >>>> + read-only; > >>>> + }; > >>>> + > >>>> + partition@60000 { > >>>> + label = "0:QSEE"; > >>>> + reg = <0x060000 0x060000>; > >>>> + read-only; > >>>> + }; > >>>> + > >>>> + partition@c0000 { > >>>> + label = "0:CDT"; > >>>> + reg = <0x0c0000 0x010000>; > >>>> + read-only; > >>>> + }; > >>> > >>> > >>> Someone may rip on you for capitalization of labels. (I'm not a committer.) > >>> > >>> > >>>> + > >>>> + partition@d0000 { > >>>> + label = "0:DDRPARAMS"; > >>>> + reg = <0x0d0000 0x010000>; > >>>> + read-only; > >>>> + }; > >>>> + > >>>> + partition@e0000 { > >>>> + label = "u-boot-env"; > >>>> + reg = <0x0e0000 0x010000>; > >>>> + read-only; > >>>> + }; > >>> > >>> > >>> U-Boot environment may want/need to be writable > >>> > >>> > >>>> + > >>>> + partition@f0000 { > >>>> + label = "u-boot"; > >>>> + reg = <0x0f0000 0x080000>; > >>>> + read-only; > >>>> + }; > >>>> + > >>>> + partition@170000 { > >>>> + label = "art"; > >>>> + reg = <0x170000 0x010000>; > >>>> + read-only; > >>>> + }; > >>>> + }; > >>>> + }; > >>>> + > >>>> + mt29f@1 { > >>>> + #address-cells = <1>; > >>>> + #size-cells = <1>; > >>>> + reg = <1>; > >>>> + status = "okay"; > >>>> + compatible = "spinand,mt29f"; > >>>> + spi-max-frequency = <24000000>; > >>> > >>> > >>> Same comment on "mt29f" vs. something generic and descriptive. > >>> > >>> > >>> Converting to the upstream SPI-NAND driver here should be as simple as > >>> > >>> compatible = "spi-nand"; > >>> > >>> > >>> > >>>> + > >>>> + partitions { > >>>> + compatible = "fixed-partitions"; > >>>> + > >>>> + partition@0 { > >>>> + label = "ubi"; > >>>> + reg = <0x0000000 0x8000000>; > >>>> + }; > >>>> + }; > >>>> + }; > >>>> + }; > >>>> + > >>>> [...] > >>> > >>> > >> > >> -- > >> Regards > >> > >> Daniel Danzberger > >> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans > >> > >> _______________________________________________ > >> openwrt-devel mailing list > >> openwrt-devel@lists.openwrt.org > >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > > > -- > Regards > > Daniel Danzberger > embeDD GmbH, Alter Postplatz 2, CH-6370 Stans
I am already using 'ubi.mtd=rootfs root=/dev/ubiblock0_1', which has worked before On 10/31/19 11:26 AM, Robert Marko wrote: > On Thu, 31 Oct 2019 at 11:25, Daniel Danzberger <daniel@dd-wrt.com> wrote: >> >> On the deprecated staging driver, it somehow directly came up as "rootfs" and >> not "ubi". Even though it has been named "ubi" in the dts. >> Now the image won't boot because no rootfs is detected: >> >> ---- >> [ 1.919001] Creating 1 MTD partitions on "spi0.1": >> [ 1.925399] 0x000000000000-0x000008000000 : "ubi" >> [ 1.940324] random: fast init done >> ... >> [ 3.170978] UBI error: cannot open mtd rootfs, error -2 >> [ 3.171027] hctosys: unable to open rtc device ([ 3.180802] Waiting for >> root device /dev/ubiblock0_1... > This is due to your bootargs, you can either use bootargs-append to > set rootfs to ubi or change them in bootloader. > This is classic on boards derived from QCA reference designs >> ---- >> >> >> On 10/31/19 11:19 AM, Robert Marko wrote: >>> On Thu, 31 Oct 2019 at 11:17, Daniel Danzberger <daniel@dd-wrt.com> wrote: >>>> >>>> Using 'compatible = "spi-nand"' worked and the device got detected by the >>>> driver. However it won't create and "rootfs" partition like it did before. >>>> >>>> --- >>>> [ 1.901930] spi-nand spi0.1: GigaDevice SPI NAND was found. >>>> [ 1.905266] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, >>>> OOB size: 128 >>>> [ 1.911015] 1 fixed-partitions partitions found on MTD device spi0.1 >>>> [ 1.919010] Creating 1 MTD partitions on "spi0.1": >>>> [ 1.925410] 0x000000000000-0x000008000000 : "ubi" >>> It creates the partitions like set in DTS, ubi partition contains both >>> kernel and rootfs. >>>> --- >>>> >>>> >>>> On 10/30/19 4:51 PM, Jeff Kletsky wrote: >>>>> On 10/30/19 4:27 AM, Daniel Danzberger wrote: >>>>> >>>>>> This device contains 2 flash devices. One NOR (32M) and one NAND (128M). >>>>>> U-boot and caldata are on the NOR, the firmware on the NAND. >>>>>> >>>>>> SoC: IPQ4019 >>>>>> CPU: 4x 710MHz ARMv7 >>>>>> RAM: 256MB >>>>>> FLASH: NOR:32MB NAND:128MB >>>>>> >>>>>> [...] >>>>>> >>>>>> >>>>> >>>>> .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ >>>>> .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ >>>>> >>>>> The sudden appearance of a need the MSM bus and its IDs worries me. >>>>> >>>>> With 25 devices already on the ipq40xx platform without them, it feels >>>>> like something is missing if they are needed by this one. >>>>> >>>>> >>>>>> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 >>>>>> index 8948b73ff7..3ee921abed 100644 >>>>>> --- a/target/linux/ipq40xx/config-4.19 >>>>>> +++ b/target/linux/ipq40xx/config-4.19 >>>>>> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y >>>>>> CONFIG_MTD_NAND_QCOM=y >>>>>> CONFIG_MTD_SPI_NAND=y >>>>>> CONFIG_MTD_SPI_NOR=y >>>>>> +CONFIG_MTD_SPINAND_MT29F=y >>>>>> +CONFIG_MTD_SPINAND_GIGADEVICE=y >>>>>> +CONFIG_MTD_SPINAND_ONDIEECC=y >>>>> >>>>> >>>>> The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND >>>>> >>>>> >>>>>> CONFIG_MTD_SPLIT_FIRMWARE=y >>>>>> CONFIG_MTD_SPLIT_FIT_FW=y >>>>>> CONFIG_MTD_UBI=y >>>>>> >>>>>> [...] >>>>>> >>>>>> diff --git >>>>>> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>>>> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>>>> new file mode 100644 >>>>>> index 0000000000..5553bbd166 >>>>>> --- /dev/null >>>>>> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>>>> @@ -0,0 +1,371 @@ >>>>>> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. >>>>>> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> >>>>>> + * >>>>>> + * Permission to use, copy, modify, and/or distribute this software for any >>>>>> + * purpose with or without fee is hereby granted, provided that the above >>>>>> + * copyright notice and this permission notice appear in all copies. >>>>>> + * >>>>>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES >>>>>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF >>>>>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR >>>>>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES >>>>>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN >>>>>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF >>>>>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. >>>>>> + * >>>>>> + */ >>>>>> + >>>>>> >>>>>> [...] >>>>>> >>>>>> + >>>>>> + spi_0: spi@78b5000 { >>>>>> + pinctrl-0 = <&spi_0_pins>; >>>>>> + pinctrl-names = "default"; >>>>>> + status = "okay"; >>>>>> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; >>>>>> + num-cs = <2>; >>>>>> + >>>>>> + m25p80@0 { >>>>>> + #address-cells = <1>; >>>>>> + #size-cells = <1>; >>>>>> + reg = <0>; >>>>>> + linux,modalias = "m25p80", "n25q128a11"; >>>>>> + compatible = "jedec,spi-nor", "n25q128a11"; >>>>>> + spi-max-frequency = <24000000>; >>>>> >>>>> >>>>> I don't think you need linux,modalias here, nor the chip type in the compatible >>>>> line. >>>>> I believe that the following compatible line is sufficient >>>>> >>>>> compatible = "jedec,spi-nor"; >>>>> >>>>> >>>>> You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", >>>>> or the like, rather than a chip-specific name. (I'm not a committer.) >>>>> >>>>> >>>>>> + >>>>>> + partitions { >>>>>> + compatible = "fixed-partitions"; >>>>>> + >>>>>> + partition@0 { >>>>>> + label = "0:SBL1"; >>>>>> + reg = <0x000000 0x040000>; >>>>>> + read-only; >>>>>> + }; >>>>>> + >>>>>> + partition@40000 { >>>>>> + label = "0:MIBIB"; >>>>>> + reg = <0x040000 0x020000>; >>>>>> + read-only; >>>>>> + }; >>>>>> + >>>>>> + partition@60000 { >>>>>> + label = "0:QSEE"; >>>>>> + reg = <0x060000 0x060000>; >>>>>> + read-only; >>>>>> + }; >>>>>> + >>>>>> + partition@c0000 { >>>>>> + label = "0:CDT"; >>>>>> + reg = <0x0c0000 0x010000>; >>>>>> + read-only; >>>>>> + }; >>>>> >>>>> >>>>> Someone may rip on you for capitalization of labels. (I'm not a committer.) >>>>> >>>>> >>>>>> + >>>>>> + partition@d0000 { >>>>>> + label = "0:DDRPARAMS"; >>>>>> + reg = <0x0d0000 0x010000>; >>>>>> + read-only; >>>>>> + }; >>>>>> + >>>>>> + partition@e0000 { >>>>>> + label = "u-boot-env"; >>>>>> + reg = <0x0e0000 0x010000>; >>>>>> + read-only; >>>>>> + }; >>>>> >>>>> >>>>> U-Boot environment may want/need to be writable >>>>> >>>>> >>>>>> + >>>>>> + partition@f0000 { >>>>>> + label = "u-boot"; >>>>>> + reg = <0x0f0000 0x080000>; >>>>>> + read-only; >>>>>> + }; >>>>>> + >>>>>> + partition@170000 { >>>>>> + label = "art"; >>>>>> + reg = <0x170000 0x010000>; >>>>>> + read-only; >>>>>> + }; >>>>>> + }; >>>>>> + }; >>>>>> + >>>>>> + mt29f@1 { >>>>>> + #address-cells = <1>; >>>>>> + #size-cells = <1>; >>>>>> + reg = <1>; >>>>>> + status = "okay"; >>>>>> + compatible = "spinand,mt29f"; >>>>>> + spi-max-frequency = <24000000>; >>>>> >>>>> >>>>> Same comment on "mt29f" vs. something generic and descriptive. >>>>> >>>>> >>>>> Converting to the upstream SPI-NAND driver here should be as simple as >>>>> >>>>> compatible = "spi-nand"; >>>>> >>>>> >>>>> >>>>>> + >>>>>> + partitions { >>>>>> + compatible = "fixed-partitions"; >>>>>> + >>>>>> + partition@0 { >>>>>> + label = "ubi"; >>>>>> + reg = <0x0000000 0x8000000>; >>>>>> + }; >>>>>> + }; >>>>>> + }; >>>>>> + }; >>>>>> + >>>>>> [...] >>>>> >>>>> >>>> >>>> -- >>>> Regards >>>> >>>> Daniel Danzberger >>>> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans >>>> >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >>> >> >> -- >> Regards >> >> Daniel Danzberger >> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans >
On Thu, 31 Oct 2019 at 11:30, Daniel Danzberger <daniel@dd-wrt.com> wrote: > > I am already using 'ubi.mtd=rootfs root=/dev/ubiblock0_1', which has worked before Well this is the issue, your ubi.mtd needs to be ubi.mtd=ubi > > On 10/31/19 11:26 AM, Robert Marko wrote: > > On Thu, 31 Oct 2019 at 11:25, Daniel Danzberger <daniel@dd-wrt.com> wrote: > >> > >> On the deprecated staging driver, it somehow directly came up as "rootfs" and > >> not "ubi". Even though it has been named "ubi" in the dts. > >> Now the image won't boot because no rootfs is detected: > >> > >> ---- > >> [ 1.919001] Creating 1 MTD partitions on "spi0.1": > >> [ 1.925399] 0x000000000000-0x000008000000 : "ubi" > >> [ 1.940324] random: fast init done > >> ... > >> [ 3.170978] UBI error: cannot open mtd rootfs, error -2 > >> [ 3.171027] hctosys: unable to open rtc device ([ 3.180802] Waiting for > >> root device /dev/ubiblock0_1... > > This is due to your bootargs, you can either use bootargs-append to > > set rootfs to ubi or change them in bootloader. > > This is classic on boards derived from QCA reference designs > >> ---- > >> > >> > >> On 10/31/19 11:19 AM, Robert Marko wrote: > >>> On Thu, 31 Oct 2019 at 11:17, Daniel Danzberger <daniel@dd-wrt.com> wrote: > >>>> > >>>> Using 'compatible = "spi-nand"' worked and the device got detected by the > >>>> driver. However it won't create and "rootfs" partition like it did before. > >>>> > >>>> --- > >>>> [ 1.901930] spi-nand spi0.1: GigaDevice SPI NAND was found. > >>>> [ 1.905266] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, > >>>> OOB size: 128 > >>>> [ 1.911015] 1 fixed-partitions partitions found on MTD device spi0.1 > >>>> [ 1.919010] Creating 1 MTD partitions on "spi0.1": > >>>> [ 1.925410] 0x000000000000-0x000008000000 : "ubi" > >>> It creates the partitions like set in DTS, ubi partition contains both > >>> kernel and rootfs. > >>>> --- > >>>> > >>>> > >>>> On 10/30/19 4:51 PM, Jeff Kletsky wrote: > >>>>> On 10/30/19 4:27 AM, Daniel Danzberger wrote: > >>>>> > >>>>>> This device contains 2 flash devices. One NOR (32M) and one NAND (128M). > >>>>>> U-boot and caldata are on the NOR, the firmware on the NAND. > >>>>>> > >>>>>> SoC: IPQ4019 > >>>>>> CPU: 4x 710MHz ARMv7 > >>>>>> RAM: 256MB > >>>>>> FLASH: NOR:32MB NAND:128MB > >>>>>> > >>>>>> [...] > >>>>>> > >>>>>> > >>>>> > >>>>> .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ > >>>>> .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ > >>>>> > >>>>> The sudden appearance of a need the MSM bus and its IDs worries me. > >>>>> > >>>>> With 25 devices already on the ipq40xx platform without them, it feels > >>>>> like something is missing if they are needed by this one. > >>>>> > >>>>> > >>>>>> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 > >>>>>> index 8948b73ff7..3ee921abed 100644 > >>>>>> --- a/target/linux/ipq40xx/config-4.19 > >>>>>> +++ b/target/linux/ipq40xx/config-4.19 > >>>>>> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y > >>>>>> CONFIG_MTD_NAND_QCOM=y > >>>>>> CONFIG_MTD_SPI_NAND=y > >>>>>> CONFIG_MTD_SPI_NOR=y > >>>>>> +CONFIG_MTD_SPINAND_MT29F=y > >>>>>> +CONFIG_MTD_SPINAND_GIGADEVICE=y > >>>>>> +CONFIG_MTD_SPINAND_ONDIEECC=y > >>>>> > >>>>> > >>>>> The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND > >>>>> > >>>>> > >>>>>> CONFIG_MTD_SPLIT_FIRMWARE=y > >>>>>> CONFIG_MTD_SPLIT_FIT_FW=y > >>>>>> CONFIG_MTD_UBI=y > >>>>>> > >>>>>> [...] > >>>>>> > >>>>>> diff --git > >>>>>> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >>>>>> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >>>>>> new file mode 100644 > >>>>>> index 0000000000..5553bbd166 > >>>>>> --- /dev/null > >>>>>> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >>>>>> @@ -0,0 +1,371 @@ > >>>>>> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. > >>>>>> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> > >>>>>> + * > >>>>>> + * Permission to use, copy, modify, and/or distribute this software for any > >>>>>> + * purpose with or without fee is hereby granted, provided that the above > >>>>>> + * copyright notice and this permission notice appear in all copies. > >>>>>> + * > >>>>>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES > >>>>>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF > >>>>>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR > >>>>>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES > >>>>>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > >>>>>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > >>>>>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > >>>>>> + * > >>>>>> + */ > >>>>>> + > >>>>>> > >>>>>> [...] > >>>>>> > >>>>>> + > >>>>>> + spi_0: spi@78b5000 { > >>>>>> + pinctrl-0 = <&spi_0_pins>; > >>>>>> + pinctrl-names = "default"; > >>>>>> + status = "okay"; > >>>>>> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; > >>>>>> + num-cs = <2>; > >>>>>> + > >>>>>> + m25p80@0 { > >>>>>> + #address-cells = <1>; > >>>>>> + #size-cells = <1>; > >>>>>> + reg = <0>; > >>>>>> + linux,modalias = "m25p80", "n25q128a11"; > >>>>>> + compatible = "jedec,spi-nor", "n25q128a11"; > >>>>>> + spi-max-frequency = <24000000>; > >>>>> > >>>>> > >>>>> I don't think you need linux,modalias here, nor the chip type in the compatible > >>>>> line. > >>>>> I believe that the following compatible line is sufficient > >>>>> > >>>>> compatible = "jedec,spi-nor"; > >>>>> > >>>>> > >>>>> You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", > >>>>> or the like, rather than a chip-specific name. (I'm not a committer.) > >>>>> > >>>>> > >>>>>> + > >>>>>> + partitions { > >>>>>> + compatible = "fixed-partitions"; > >>>>>> + > >>>>>> + partition@0 { > >>>>>> + label = "0:SBL1"; > >>>>>> + reg = <0x000000 0x040000>; > >>>>>> + read-only; > >>>>>> + }; > >>>>>> + > >>>>>> + partition@40000 { > >>>>>> + label = "0:MIBIB"; > >>>>>> + reg = <0x040000 0x020000>; > >>>>>> + read-only; > >>>>>> + }; > >>>>>> + > >>>>>> + partition@60000 { > >>>>>> + label = "0:QSEE"; > >>>>>> + reg = <0x060000 0x060000>; > >>>>>> + read-only; > >>>>>> + }; > >>>>>> + > >>>>>> + partition@c0000 { > >>>>>> + label = "0:CDT"; > >>>>>> + reg = <0x0c0000 0x010000>; > >>>>>> + read-only; > >>>>>> + }; > >>>>> > >>>>> > >>>>> Someone may rip on you for capitalization of labels. (I'm not a committer.) > >>>>> > >>>>> > >>>>>> + > >>>>>> + partition@d0000 { > >>>>>> + label = "0:DDRPARAMS"; > >>>>>> + reg = <0x0d0000 0x010000>; > >>>>>> + read-only; > >>>>>> + }; > >>>>>> + > >>>>>> + partition@e0000 { > >>>>>> + label = "u-boot-env"; > >>>>>> + reg = <0x0e0000 0x010000>; > >>>>>> + read-only; > >>>>>> + }; > >>>>> > >>>>> > >>>>> U-Boot environment may want/need to be writable > >>>>> > >>>>> > >>>>>> + > >>>>>> + partition@f0000 { > >>>>>> + label = "u-boot"; > >>>>>> + reg = <0x0f0000 0x080000>; > >>>>>> + read-only; > >>>>>> + }; > >>>>>> + > >>>>>> + partition@170000 { > >>>>>> + label = "art"; > >>>>>> + reg = <0x170000 0x010000>; > >>>>>> + read-only; > >>>>>> + }; > >>>>>> + }; > >>>>>> + }; > >>>>>> + > >>>>>> + mt29f@1 { > >>>>>> + #address-cells = <1>; > >>>>>> + #size-cells = <1>; > >>>>>> + reg = <1>; > >>>>>> + status = "okay"; > >>>>>> + compatible = "spinand,mt29f"; > >>>>>> + spi-max-frequency = <24000000>; > >>>>> > >>>>> > >>>>> Same comment on "mt29f" vs. something generic and descriptive. > >>>>> > >>>>> > >>>>> Converting to the upstream SPI-NAND driver here should be as simple as > >>>>> > >>>>> compatible = "spi-nand"; > >>>>> > >>>>> > >>>>> > >>>>>> + > >>>>>> + partitions { > >>>>>> + compatible = "fixed-partitions"; > >>>>>> + > >>>>>> + partition@0 { > >>>>>> + label = "ubi"; > >>>>>> + reg = <0x0000000 0x8000000>; > >>>>>> + }; > >>>>>> + }; > >>>>>> + }; > >>>>>> + }; > >>>>>> + > >>>>>> [...] > >>>>> > >>>>> > >>>> > >>>> -- > >>>> Regards > >>>> > >>>> Daniel Danzberger > >>>> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans > >>>> > >>>> _______________________________________________ > >>>> openwrt-devel mailing list > >>>> openwrt-devel@lists.openwrt.org > >>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > >>> > >> > >> -- > >> Regards > >> > >> Daniel Danzberger > >> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans > > > > -- > Regards > > Daniel Danzberger > embeDD GmbH, Alter Postplatz 2, CH-6370 Stans
Well, that makes sense and now it works :) I am just wondering why it has been working before with the other driver. On 10/31/19 11:30 AM, Robert Marko wrote: > On Thu, 31 Oct 2019 at 11:30, Daniel Danzberger <daniel@dd-wrt.com> wrote: >> >> I am already using 'ubi.mtd=rootfs root=/dev/ubiblock0_1', which has worked before > Well this is the issue, your ubi.mtd needs to be ubi.mtd=ubi >> >> On 10/31/19 11:26 AM, Robert Marko wrote: >>> On Thu, 31 Oct 2019 at 11:25, Daniel Danzberger <daniel@dd-wrt.com> wrote: >>>> >>>> On the deprecated staging driver, it somehow directly came up as "rootfs" and >>>> not "ubi". Even though it has been named "ubi" in the dts. >>>> Now the image won't boot because no rootfs is detected: >>>> >>>> ---- >>>> [ 1.919001] Creating 1 MTD partitions on "spi0.1": >>>> [ 1.925399] 0x000000000000-0x000008000000 : "ubi" >>>> [ 1.940324] random: fast init done >>>> ... >>>> [ 3.170978] UBI error: cannot open mtd rootfs, error -2 >>>> [ 3.171027] hctosys: unable to open rtc device ([ 3.180802] Waiting for >>>> root device /dev/ubiblock0_1... >>> This is due to your bootargs, you can either use bootargs-append to >>> set rootfs to ubi or change them in bootloader. >>> This is classic on boards derived from QCA reference designs >>>> ---- >>>> >>>> >>>> On 10/31/19 11:19 AM, Robert Marko wrote: >>>>> On Thu, 31 Oct 2019 at 11:17, Daniel Danzberger <daniel@dd-wrt.com> wrote: >>>>>> >>>>>> Using 'compatible = "spi-nand"' worked and the device got detected by the >>>>>> driver. However it won't create and "rootfs" partition like it did before. >>>>>> >>>>>> --- >>>>>> [ 1.901930] spi-nand spi0.1: GigaDevice SPI NAND was found. >>>>>> [ 1.905266] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, >>>>>> OOB size: 128 >>>>>> [ 1.911015] 1 fixed-partitions partitions found on MTD device spi0.1 >>>>>> [ 1.919010] Creating 1 MTD partitions on "spi0.1": >>>>>> [ 1.925410] 0x000000000000-0x000008000000 : "ubi" >>>>> It creates the partitions like set in DTS, ubi partition contains both >>>>> kernel and rootfs. >>>>>> --- >>>>>> >>>>>> >>>>>> On 10/30/19 4:51 PM, Jeff Kletsky wrote: >>>>>>> On 10/30/19 4:27 AM, Daniel Danzberger wrote: >>>>>>> >>>>>>>> This device contains 2 flash devices. One NOR (32M) and one NAND (128M). >>>>>>>> U-boot and caldata are on the NOR, the firmware on the NAND. >>>>>>>> >>>>>>>> SoC: IPQ4019 >>>>>>>> CPU: 4x 710MHz ARMv7 >>>>>>>> RAM: 256MB >>>>>>>> FLASH: NOR:32MB NAND:128MB >>>>>>>> >>>>>>>> [...] >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ >>>>>>> .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ >>>>>>> >>>>>>> The sudden appearance of a need the MSM bus and its IDs worries me. >>>>>>> >>>>>>> With 25 devices already on the ipq40xx platform without them, it feels >>>>>>> like something is missing if they are needed by this one. >>>>>>> >>>>>>> >>>>>>>> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 >>>>>>>> index 8948b73ff7..3ee921abed 100644 >>>>>>>> --- a/target/linux/ipq40xx/config-4.19 >>>>>>>> +++ b/target/linux/ipq40xx/config-4.19 >>>>>>>> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y >>>>>>>> CONFIG_MTD_NAND_QCOM=y >>>>>>>> CONFIG_MTD_SPI_NAND=y >>>>>>>> CONFIG_MTD_SPI_NOR=y >>>>>>>> +CONFIG_MTD_SPINAND_MT29F=y >>>>>>>> +CONFIG_MTD_SPINAND_GIGADEVICE=y >>>>>>>> +CONFIG_MTD_SPINAND_ONDIEECC=y >>>>>>> >>>>>>> >>>>>>> The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND >>>>>>> >>>>>>> >>>>>>>> CONFIG_MTD_SPLIT_FIRMWARE=y >>>>>>>> CONFIG_MTD_SPLIT_FIT_FW=y >>>>>>>> CONFIG_MTD_UBI=y >>>>>>>> >>>>>>>> [...] >>>>>>>> >>>>>>>> diff --git >>>>>>>> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>>>>>> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>>>>>> new file mode 100644 >>>>>>>> index 0000000000..5553bbd166 >>>>>>>> --- /dev/null >>>>>>>> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>>>>>> @@ -0,0 +1,371 @@ >>>>>>>> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. >>>>>>>> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> >>>>>>>> + * >>>>>>>> + * Permission to use, copy, modify, and/or distribute this software for any >>>>>>>> + * purpose with or without fee is hereby granted, provided that the above >>>>>>>> + * copyright notice and this permission notice appear in all copies. >>>>>>>> + * >>>>>>>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES >>>>>>>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF >>>>>>>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR >>>>>>>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES >>>>>>>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN >>>>>>>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF >>>>>>>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. >>>>>>>> + * >>>>>>>> + */ >>>>>>>> + >>>>>>>> >>>>>>>> [...] >>>>>>>> >>>>>>>> + >>>>>>>> + spi_0: spi@78b5000 { >>>>>>>> + pinctrl-0 = <&spi_0_pins>; >>>>>>>> + pinctrl-names = "default"; >>>>>>>> + status = "okay"; >>>>>>>> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; >>>>>>>> + num-cs = <2>; >>>>>>>> + >>>>>>>> + m25p80@0 { >>>>>>>> + #address-cells = <1>; >>>>>>>> + #size-cells = <1>; >>>>>>>> + reg = <0>; >>>>>>>> + linux,modalias = "m25p80", "n25q128a11"; >>>>>>>> + compatible = "jedec,spi-nor", "n25q128a11"; >>>>>>>> + spi-max-frequency = <24000000>; >>>>>>> >>>>>>> >>>>>>> I don't think you need linux,modalias here, nor the chip type in the compatible >>>>>>> line. >>>>>>> I believe that the following compatible line is sufficient >>>>>>> >>>>>>> compatible = "jedec,spi-nor"; >>>>>>> >>>>>>> >>>>>>> You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", >>>>>>> or the like, rather than a chip-specific name. (I'm not a committer.) >>>>>>> >>>>>>> >>>>>>>> + >>>>>>>> + partitions { >>>>>>>> + compatible = "fixed-partitions"; >>>>>>>> + >>>>>>>> + partition@0 { >>>>>>>> + label = "0:SBL1"; >>>>>>>> + reg = <0x000000 0x040000>; >>>>>>>> + read-only; >>>>>>>> + }; >>>>>>>> + >>>>>>>> + partition@40000 { >>>>>>>> + label = "0:MIBIB"; >>>>>>>> + reg = <0x040000 0x020000>; >>>>>>>> + read-only; >>>>>>>> + }; >>>>>>>> + >>>>>>>> + partition@60000 { >>>>>>>> + label = "0:QSEE"; >>>>>>>> + reg = <0x060000 0x060000>; >>>>>>>> + read-only; >>>>>>>> + }; >>>>>>>> + >>>>>>>> + partition@c0000 { >>>>>>>> + label = "0:CDT"; >>>>>>>> + reg = <0x0c0000 0x010000>; >>>>>>>> + read-only; >>>>>>>> + }; >>>>>>> >>>>>>> >>>>>>> Someone may rip on you for capitalization of labels. (I'm not a committer.) >>>>>>> >>>>>>> >>>>>>>> + >>>>>>>> + partition@d0000 { >>>>>>>> + label = "0:DDRPARAMS"; >>>>>>>> + reg = <0x0d0000 0x010000>; >>>>>>>> + read-only; >>>>>>>> + }; >>>>>>>> + >>>>>>>> + partition@e0000 { >>>>>>>> + label = "u-boot-env"; >>>>>>>> + reg = <0x0e0000 0x010000>; >>>>>>>> + read-only; >>>>>>>> + }; >>>>>>> >>>>>>> >>>>>>> U-Boot environment may want/need to be writable >>>>>>> >>>>>>> >>>>>>>> + >>>>>>>> + partition@f0000 { >>>>>>>> + label = "u-boot"; >>>>>>>> + reg = <0x0f0000 0x080000>; >>>>>>>> + read-only; >>>>>>>> + }; >>>>>>>> + >>>>>>>> + partition@170000 { >>>>>>>> + label = "art"; >>>>>>>> + reg = <0x170000 0x010000>; >>>>>>>> + read-only; >>>>>>>> + }; >>>>>>>> + }; >>>>>>>> + }; >>>>>>>> + >>>>>>>> + mt29f@1 { >>>>>>>> + #address-cells = <1>; >>>>>>>> + #size-cells = <1>; >>>>>>>> + reg = <1>; >>>>>>>> + status = "okay"; >>>>>>>> + compatible = "spinand,mt29f"; >>>>>>>> + spi-max-frequency = <24000000>; >>>>>>> >>>>>>> >>>>>>> Same comment on "mt29f" vs. something generic and descriptive. >>>>>>> >>>>>>> >>>>>>> Converting to the upstream SPI-NAND driver here should be as simple as >>>>>>> >>>>>>> compatible = "spi-nand"; >>>>>>> >>>>>>> >>>>>>> >>>>>>>> + >>>>>>>> + partitions { >>>>>>>> + compatible = "fixed-partitions"; >>>>>>>> + >>>>>>>> + partition@0 { >>>>>>>> + label = "ubi"; >>>>>>>> + reg = <0x0000000 0x8000000>; >>>>>>>> + }; >>>>>>>> + }; >>>>>>>> + }; >>>>>>>> + }; >>>>>>>> + >>>>>>>> [...] >>>>>>> >>>>>>> >>>>>> >>>>>> -- >>>>>> Regards >>>>>> >>>>>> Daniel Danzberger >>>>>> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans >>>>>> >>>>>> _______________________________________________ >>>>>> openwrt-devel mailing list >>>>>> openwrt-devel@lists.openwrt.org >>>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >>>>> >>>> >>>> -- >>>> Regards >>>> >>>> Daniel Danzberger >>>> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans >>> >> >> -- >> Regards >> >> Daniel Danzberger >> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans >
Because of old MT29F driver, it was basically a hack just to get SPI-NANDs working. On Thu, 31 Oct 2019 at 11:34, Daniel Danzberger <daniel@dd-wrt.com> wrote: > > Well, that makes sense and now it works :) > I am just wondering why it has been working before with the other driver. > > On 10/31/19 11:30 AM, Robert Marko wrote: > > On Thu, 31 Oct 2019 at 11:30, Daniel Danzberger <daniel@dd-wrt.com> wrote: > >> > >> I am already using 'ubi.mtd=rootfs root=/dev/ubiblock0_1', which has worked before > > Well this is the issue, your ubi.mtd needs to be ubi.mtd=ubi > >> > >> On 10/31/19 11:26 AM, Robert Marko wrote: > >>> On Thu, 31 Oct 2019 at 11:25, Daniel Danzberger <daniel@dd-wrt.com> wrote: > >>>> > >>>> On the deprecated staging driver, it somehow directly came up as "rootfs" and > >>>> not "ubi". Even though it has been named "ubi" in the dts. > >>>> Now the image won't boot because no rootfs is detected: > >>>> > >>>> ---- > >>>> [ 1.919001] Creating 1 MTD partitions on "spi0.1": > >>>> [ 1.925399] 0x000000000000-0x000008000000 : "ubi" > >>>> [ 1.940324] random: fast init done > >>>> ... > >>>> [ 3.170978] UBI error: cannot open mtd rootfs, error -2 > >>>> [ 3.171027] hctosys: unable to open rtc device ([ 3.180802] Waiting for > >>>> root device /dev/ubiblock0_1... > >>> This is due to your bootargs, you can either use bootargs-append to > >>> set rootfs to ubi or change them in bootloader. > >>> This is classic on boards derived from QCA reference designs > >>>> ---- > >>>> > >>>> > >>>> On 10/31/19 11:19 AM, Robert Marko wrote: > >>>>> On Thu, 31 Oct 2019 at 11:17, Daniel Danzberger <daniel@dd-wrt.com> wrote: > >>>>>> > >>>>>> Using 'compatible = "spi-nand"' worked and the device got detected by the > >>>>>> driver. However it won't create and "rootfs" partition like it did before. > >>>>>> > >>>>>> --- > >>>>>> [ 1.901930] spi-nand spi0.1: GigaDevice SPI NAND was found. > >>>>>> [ 1.905266] spi-nand spi0.1: 128 MiB, block size: 128 KiB, page size: 2048, > >>>>>> OOB size: 128 > >>>>>> [ 1.911015] 1 fixed-partitions partitions found on MTD device spi0.1 > >>>>>> [ 1.919010] Creating 1 MTD partitions on "spi0.1": > >>>>>> [ 1.925410] 0x000000000000-0x000008000000 : "ubi" > >>>>> It creates the partitions like set in DTS, ubi partition contains both > >>>>> kernel and rootfs. > >>>>>> --- > >>>>>> > >>>>>> > >>>>>> On 10/30/19 4:51 PM, Jeff Kletsky wrote: > >>>>>>> On 10/30/19 4:27 AM, Daniel Danzberger wrote: > >>>>>>> > >>>>>>>> This device contains 2 flash devices. One NOR (32M) and one NAND (128M). > >>>>>>>> U-boot and caldata are on the NOR, the firmware on the NAND. > >>>>>>>> > >>>>>>>> SoC: IPQ4019 > >>>>>>>> CPU: 4x 710MHz ARMv7 > >>>>>>>> RAM: 256MB > >>>>>>>> FLASH: NOR:32MB NAND:128MB > >>>>>>>> > >>>>>>>> [...] > >>>>>>>> > >>>>>>>> > >>>>>>> > >>>>>>> .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ > >>>>>>> .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ > >>>>>>> > >>>>>>> The sudden appearance of a need the MSM bus and its IDs worries me. > >>>>>>> > >>>>>>> With 25 devices already on the ipq40xx platform without them, it feels > >>>>>>> like something is missing if they are needed by this one. > >>>>>>> > >>>>>>> > >>>>>>>> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 > >>>>>>>> index 8948b73ff7..3ee921abed 100644 > >>>>>>>> --- a/target/linux/ipq40xx/config-4.19 > >>>>>>>> +++ b/target/linux/ipq40xx/config-4.19 > >>>>>>>> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y > >>>>>>>> CONFIG_MTD_NAND_QCOM=y > >>>>>>>> CONFIG_MTD_SPI_NAND=y > >>>>>>>> CONFIG_MTD_SPI_NOR=y > >>>>>>>> +CONFIG_MTD_SPINAND_MT29F=y > >>>>>>>> +CONFIG_MTD_SPINAND_GIGADEVICE=y > >>>>>>>> +CONFIG_MTD_SPINAND_ONDIEECC=y > >>>>>>> > >>>>>>> > >>>>>>> The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND > >>>>>>> > >>>>>>> > >>>>>>>> CONFIG_MTD_SPLIT_FIRMWARE=y > >>>>>>>> CONFIG_MTD_SPLIT_FIT_FW=y > >>>>>>>> CONFIG_MTD_UBI=y > >>>>>>>> > >>>>>>>> [...] > >>>>>>>> > >>>>>>>> diff --git > >>>>>>>> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >>>>>>>> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >>>>>>>> new file mode 100644 > >>>>>>>> index 0000000000..5553bbd166 > >>>>>>>> --- /dev/null > >>>>>>>> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >>>>>>>> @@ -0,0 +1,371 @@ > >>>>>>>> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. > >>>>>>>> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> > >>>>>>>> + * > >>>>>>>> + * Permission to use, copy, modify, and/or distribute this software for any > >>>>>>>> + * purpose with or without fee is hereby granted, provided that the above > >>>>>>>> + * copyright notice and this permission notice appear in all copies. > >>>>>>>> + * > >>>>>>>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES > >>>>>>>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF > >>>>>>>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR > >>>>>>>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES > >>>>>>>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > >>>>>>>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > >>>>>>>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > >>>>>>>> + * > >>>>>>>> + */ > >>>>>>>> + > >>>>>>>> > >>>>>>>> [...] > >>>>>>>> > >>>>>>>> + > >>>>>>>> + spi_0: spi@78b5000 { > >>>>>>>> + pinctrl-0 = <&spi_0_pins>; > >>>>>>>> + pinctrl-names = "default"; > >>>>>>>> + status = "okay"; > >>>>>>>> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; > >>>>>>>> + num-cs = <2>; > >>>>>>>> + > >>>>>>>> + m25p80@0 { > >>>>>>>> + #address-cells = <1>; > >>>>>>>> + #size-cells = <1>; > >>>>>>>> + reg = <0>; > >>>>>>>> + linux,modalias = "m25p80", "n25q128a11"; > >>>>>>>> + compatible = "jedec,spi-nor", "n25q128a11"; > >>>>>>>> + spi-max-frequency = <24000000>; > >>>>>>> > >>>>>>> > >>>>>>> I don't think you need linux,modalias here, nor the chip type in the compatible > >>>>>>> line. > >>>>>>> I believe that the following compatible line is sufficient > >>>>>>> > >>>>>>> compatible = "jedec,spi-nor"; > >>>>>>> > >>>>>>> > >>>>>>> You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", > >>>>>>> or the like, rather than a chip-specific name. (I'm not a committer.) > >>>>>>> > >>>>>>> > >>>>>>>> + > >>>>>>>> + partitions { > >>>>>>>> + compatible = "fixed-partitions"; > >>>>>>>> + > >>>>>>>> + partition@0 { > >>>>>>>> + label = "0:SBL1"; > >>>>>>>> + reg = <0x000000 0x040000>; > >>>>>>>> + read-only; > >>>>>>>> + }; > >>>>>>>> + > >>>>>>>> + partition@40000 { > >>>>>>>> + label = "0:MIBIB"; > >>>>>>>> + reg = <0x040000 0x020000>; > >>>>>>>> + read-only; > >>>>>>>> + }; > >>>>>>>> + > >>>>>>>> + partition@60000 { > >>>>>>>> + label = "0:QSEE"; > >>>>>>>> + reg = <0x060000 0x060000>; > >>>>>>>> + read-only; > >>>>>>>> + }; > >>>>>>>> + > >>>>>>>> + partition@c0000 { > >>>>>>>> + label = "0:CDT"; > >>>>>>>> + reg = <0x0c0000 0x010000>; > >>>>>>>> + read-only; > >>>>>>>> + }; > >>>>>>> > >>>>>>> > >>>>>>> Someone may rip on you for capitalization of labels. (I'm not a committer.) > >>>>>>> > >>>>>>> > >>>>>>>> + > >>>>>>>> + partition@d0000 { > >>>>>>>> + label = "0:DDRPARAMS"; > >>>>>>>> + reg = <0x0d0000 0x010000>; > >>>>>>>> + read-only; > >>>>>>>> + }; > >>>>>>>> + > >>>>>>>> + partition@e0000 { > >>>>>>>> + label = "u-boot-env"; > >>>>>>>> + reg = <0x0e0000 0x010000>; > >>>>>>>> + read-only; > >>>>>>>> + }; > >>>>>>> > >>>>>>> > >>>>>>> U-Boot environment may want/need to be writable > >>>>>>> > >>>>>>> > >>>>>>>> + > >>>>>>>> + partition@f0000 { > >>>>>>>> + label = "u-boot"; > >>>>>>>> + reg = <0x0f0000 0x080000>; > >>>>>>>> + read-only; > >>>>>>>> + }; > >>>>>>>> + > >>>>>>>> + partition@170000 { > >>>>>>>> + label = "art"; > >>>>>>>> + reg = <0x170000 0x010000>; > >>>>>>>> + read-only; > >>>>>>>> + }; > >>>>>>>> + }; > >>>>>>>> + }; > >>>>>>>> + > >>>>>>>> + mt29f@1 { > >>>>>>>> + #address-cells = <1>; > >>>>>>>> + #size-cells = <1>; > >>>>>>>> + reg = <1>; > >>>>>>>> + status = "okay"; > >>>>>>>> + compatible = "spinand,mt29f"; > >>>>>>>> + spi-max-frequency = <24000000>; > >>>>>>> > >>>>>>> > >>>>>>> Same comment on "mt29f" vs. something generic and descriptive. > >>>>>>> > >>>>>>> > >>>>>>> Converting to the upstream SPI-NAND driver here should be as simple as > >>>>>>> > >>>>>>> compatible = "spi-nand"; > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>>> + > >>>>>>>> + partitions { > >>>>>>>> + compatible = "fixed-partitions"; > >>>>>>>> + > >>>>>>>> + partition@0 { > >>>>>>>> + label = "ubi"; > >>>>>>>> + reg = <0x0000000 0x8000000>; > >>>>>>>> + }; > >>>>>>>> + }; > >>>>>>>> + }; > >>>>>>>> + }; > >>>>>>>> + > >>>>>>>> [...] > >>>>>>> > >>>>>>> > >>>>>> > >>>>>> -- > >>>>>> Regards > >>>>>> > >>>>>> Daniel Danzberger > >>>>>> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans > >>>>>> > >>>>>> _______________________________________________ > >>>>>> openwrt-devel mailing list > >>>>>> openwrt-devel@lists.openwrt.org > >>>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > >>>>> > >>>> > >>>> -- > >>>> Regards > >>>> > >>>> Daniel Danzberger > >>>> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans > >>> > >> > >> -- > >> Regards > >> > >> Daniel Danzberger > >> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans > > > > -- > Regards > > Daniel Danzberger > embeDD GmbH, Alter Postplatz 2, CH-6370 Stans
Hi Jeff, > > .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ > .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ > > The sudden appearance of a need the MSM bus and its IDs worries me. > > With 25 devices already on the ipq40xx platform without them, it feels > like something is missing if they are needed by this one. I already tried it without those files, but the wifi won't get detected in that case. > > >> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 >> index 8948b73ff7..3ee921abed 100644 >> --- a/target/linux/ipq40xx/config-4.19 >> +++ b/target/linux/ipq40xx/config-4.19 >> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y >> CONFIG_MTD_NAND_QCOM=y >> CONFIG_MTD_SPI_NAND=y >> CONFIG_MTD_SPI_NOR=y >> +CONFIG_MTD_SPINAND_MT29F=y >> +CONFIG_MTD_SPINAND_GIGADEVICE=y >> +CONFIG_MTD_SPINAND_ONDIEECC=y > > > The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND > > >> CONFIG_MTD_SPLIT_FIRMWARE=y >> CONFIG_MTD_SPLIT_FIT_FW=y >> CONFIG_MTD_UBI=y >> >> [...] >> >> diff --git >> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >> new file mode 100644 >> index 0000000000..5553bbd166 >> --- /dev/null >> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >> @@ -0,0 +1,371 @@ >> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. >> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> >> + * >> + * Permission to use, copy, modify, and/or distribute this software for any >> + * purpose with or without fee is hereby granted, provided that the above >> + * copyright notice and this permission notice appear in all copies. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES >> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF >> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR >> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES >> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN >> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF >> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. >> + * >> + */ >> + >> >> [...] >> >> + >> + spi_0: spi@78b5000 { >> + pinctrl-0 = <&spi_0_pins>; >> + pinctrl-names = "default"; >> + status = "okay"; >> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; >> + num-cs = <2>; >> + >> + m25p80@0 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + reg = <0>; >> + linux,modalias = "m25p80", "n25q128a11"; >> + compatible = "jedec,spi-nor", "n25q128a11"; >> + spi-max-frequency = <24000000>; > > > I don't think you need linux,modalias here, nor the chip type in the compatible > line. > I believe that the following compatible line is sufficient > > compatible = "jedec,spi-nor"; > > > You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", > or the like, rather than a chip-specific name. (I'm not a committer.) > > >> + >> + partitions { >> + compatible = "fixed-partitions"; >> + >> + partition@0 { >> + label = "0:SBL1"; >> + reg = <0x000000 0x040000>; >> + read-only; >> + }; >> + >> + partition@40000 { >> + label = "0:MIBIB"; >> + reg = <0x040000 0x020000>; >> + read-only; >> + }; >> + >> + partition@60000 { >> + label = "0:QSEE"; >> + reg = <0x060000 0x060000>; >> + read-only; >> + }; >> + >> + partition@c0000 { >> + label = "0:CDT"; >> + reg = <0x0c0000 0x010000>; >> + read-only; >> + }; > > > Someone may rip on you for capitalization of labels. (I'm not a committer.) > > >> + >> + partition@d0000 { >> + label = "0:DDRPARAMS"; >> + reg = <0x0d0000 0x010000>; >> + read-only; >> + }; >> + >> + partition@e0000 { >> + label = "u-boot-env"; >> + reg = <0x0e0000 0x010000>; >> + read-only; >> + }; > > > U-Boot environment may want/need to be writable > > >> + >> + partition@f0000 { >> + label = "u-boot"; >> + reg = <0x0f0000 0x080000>; >> + read-only; >> + }; >> + >> + partition@170000 { >> + label = "art"; >> + reg = <0x170000 0x010000>; >> + read-only; >> + }; >> + }; >> + }; >> + >> + mt29f@1 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + reg = <1>; >> + status = "okay"; >> + compatible = "spinand,mt29f"; >> + spi-max-frequency = <24000000>; > > > Same comment on "mt29f" vs. something generic and descriptive. > > > Converting to the upstream SPI-NAND driver here should be as simple as > > compatible = "spi-nand"; > > > >> + >> + partitions { >> + compatible = "fixed-partitions"; >> + >> + partition@0 { >> + label = "ubi"; >> + reg = <0x0000000 0x8000000>; >> + }; >> + }; >> + }; >> + }; >> + >> [...] > >
On Thu, 31 Oct 2019 at 13:10, Daniel Danzberger <daniel@dd-wrt.com> wrote: > > Hi Jeff, > > > > .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ > > .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ > > > > The sudden appearance of a need the MSM bus and its IDs worries me. > > > > With 25 devices already on the ipq40xx platform without them, it feels > > like something is missing if they are needed by this one. > > I already tried it without those files, but the wifi won't get detected in that > case. That is because you are trying to reuse QSDK DTS, this wont wont neither its supported. You need to convert it to OpenWrt/Upstream kernel style and bindings. There are lot of examples in ipq40xx already. > > > > > > >> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 > >> index 8948b73ff7..3ee921abed 100644 > >> --- a/target/linux/ipq40xx/config-4.19 > >> +++ b/target/linux/ipq40xx/config-4.19 > >> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y > >> CONFIG_MTD_NAND_QCOM=y > >> CONFIG_MTD_SPI_NAND=y > >> CONFIG_MTD_SPI_NOR=y > >> +CONFIG_MTD_SPINAND_MT29F=y > >> +CONFIG_MTD_SPINAND_GIGADEVICE=y > >> +CONFIG_MTD_SPINAND_ONDIEECC=y > > > > > > The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND > > > > > >> CONFIG_MTD_SPLIT_FIRMWARE=y > >> CONFIG_MTD_SPLIT_FIT_FW=y > >> CONFIG_MTD_UBI=y > >> > >> [...] > >> > >> diff --git > >> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >> new file mode 100644 > >> index 0000000000..5553bbd166 > >> --- /dev/null > >> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts > >> @@ -0,0 +1,371 @@ > >> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. > >> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> > >> + * > >> + * Permission to use, copy, modify, and/or distribute this software for any > >> + * purpose with or without fee is hereby granted, provided that the above > >> + * copyright notice and this permission notice appear in all copies. > >> + * > >> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES > >> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF > >> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR > >> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES > >> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN > >> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF > >> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. > >> + * > >> + */ > >> + > >> > >> [...] > >> > >> + > >> + spi_0: spi@78b5000 { > >> + pinctrl-0 = <&spi_0_pins>; > >> + pinctrl-names = "default"; > >> + status = "okay"; > >> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; > >> + num-cs = <2>; > >> + > >> + m25p80@0 { > >> + #address-cells = <1>; > >> + #size-cells = <1>; > >> + reg = <0>; > >> + linux,modalias = "m25p80", "n25q128a11"; > >> + compatible = "jedec,spi-nor", "n25q128a11"; > >> + spi-max-frequency = <24000000>; > > > > > > I don't think you need linux,modalias here, nor the chip type in the compatible > > line. > > I believe that the following compatible line is sufficient > > > > compatible = "jedec,spi-nor"; > > > > > > You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", > > or the like, rather than a chip-specific name. (I'm not a committer.) > > > > > >> + > >> + partitions { > >> + compatible = "fixed-partitions"; > >> + > >> + partition@0 { > >> + label = "0:SBL1"; > >> + reg = <0x000000 0x040000>; > >> + read-only; > >> + }; > >> + > >> + partition@40000 { > >> + label = "0:MIBIB"; > >> + reg = <0x040000 0x020000>; > >> + read-only; > >> + }; > >> + > >> + partition@60000 { > >> + label = "0:QSEE"; > >> + reg = <0x060000 0x060000>; > >> + read-only; > >> + }; > >> + > >> + partition@c0000 { > >> + label = "0:CDT"; > >> + reg = <0x0c0000 0x010000>; > >> + read-only; > >> + }; > > > > > > Someone may rip on you for capitalization of labels. (I'm not a committer.) > > > > > >> + > >> + partition@d0000 { > >> + label = "0:DDRPARAMS"; > >> + reg = <0x0d0000 0x010000>; > >> + read-only; > >> + }; > >> + > >> + partition@e0000 { > >> + label = "u-boot-env"; > >> + reg = <0x0e0000 0x010000>; > >> + read-only; > >> + }; > > > > > > U-Boot environment may want/need to be writable > > > > > >> + > >> + partition@f0000 { > >> + label = "u-boot"; > >> + reg = <0x0f0000 0x080000>; > >> + read-only; > >> + }; > >> + > >> + partition@170000 { > >> + label = "art"; > >> + reg = <0x170000 0x010000>; > >> + read-only; > >> + }; > >> + }; > >> + }; > >> + > >> + mt29f@1 { > >> + #address-cells = <1>; > >> + #size-cells = <1>; > >> + reg = <1>; > >> + status = "okay"; > >> + compatible = "spinand,mt29f"; > >> + spi-max-frequency = <24000000>; > > > > > > Same comment on "mt29f" vs. something generic and descriptive. > > > > > > Converting to the upstream SPI-NAND driver here should be as simple as > > > > compatible = "spi-nand"; > > > > > > > >> + > >> + partitions { > >> + compatible = "fixed-partitions"; > >> + > >> + partition@0 { > >> + label = "ubi"; > >> + reg = <0x0000000 0x8000000>; > >> + }; > >> + }; > >> + }; > >> + }; > >> + > >> [...] > > > > > > -- > Regards > > Daniel Danzberger > embeDD GmbH, Alter Postplatz 2, CH-6370 Stans > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
It turned out that the wifi wasn't working because of a missmatch in the mtd "art" partition naming. The ath10k caldata hotplug script was expecting it named "0:ART" instead of "art". Wifi seems to work fine now. I will drop those files in the next PR. On 10/31/19 1:12 PM, Robert Marko wrote: > On Thu, 31 Oct 2019 at 13:10, Daniel Danzberger <daniel@dd-wrt.com> wrote: >> >> Hi Jeff, >>> >>> .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ >>> .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ >>> >>> The sudden appearance of a need the MSM bus and its IDs worries me. >>> >>> With 25 devices already on the ipq40xx platform without them, it feels >>> like something is missing if they are needed by this one. >> >> I already tried it without those files, but the wifi won't get detected in that >> case. > That is because you are trying to reuse QSDK DTS, this wont wont > neither its supported. > You need to convert it to OpenWrt/Upstream kernel style and bindings. > There are lot of examples in ipq40xx already. >> >>> >>> >>>> diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 >>>> index 8948b73ff7..3ee921abed 100644 >>>> --- a/target/linux/ipq40xx/config-4.19 >>>> +++ b/target/linux/ipq40xx/config-4.19 >>>> @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y >>>> CONFIG_MTD_NAND_QCOM=y >>>> CONFIG_MTD_SPI_NAND=y >>>> CONFIG_MTD_SPI_NOR=y >>>> +CONFIG_MTD_SPINAND_MT29F=y >>>> +CONFIG_MTD_SPINAND_GIGADEVICE=y >>>> +CONFIG_MTD_SPINAND_ONDIEECC=y >>> >>> >>> The CONFIG_SPINAND_* additions are not required for upstream SPI-NAND >>> >>> >>>> CONFIG_MTD_SPLIT_FIRMWARE=y >>>> CONFIG_MTD_SPLIT_FIT_FW=y >>>> CONFIG_MTD_UBI=y >>>> >>>> [...] >>>> >>>> diff --git >>>> a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>> b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>> new file mode 100644 >>>> index 0000000000..5553bbd166 >>>> --- /dev/null >>>> +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts >>>> @@ -0,0 +1,371 @@ >>>> +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. >>>> + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> >>>> + * >>>> + * Permission to use, copy, modify, and/or distribute this software for any >>>> + * purpose with or without fee is hereby granted, provided that the above >>>> + * copyright notice and this permission notice appear in all copies. >>>> + * >>>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES >>>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF >>>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR >>>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES >>>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN >>>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF >>>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. >>>> + * >>>> + */ >>>> + >>>> >>>> [...] >>>> >>>> + >>>> + spi_0: spi@78b5000 { >>>> + pinctrl-0 = <&spi_0_pins>; >>>> + pinctrl-names = "default"; >>>> + status = "okay"; >>>> + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; >>>> + num-cs = <2>; >>>> + >>>> + m25p80@0 { >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + reg = <0>; >>>> + linux,modalias = "m25p80", "n25q128a11"; >>>> + compatible = "jedec,spi-nor", "n25q128a11"; >>>> + spi-max-frequency = <24000000>; >>> >>> >>> I don't think you need linux,modalias here, nor the chip type in the compatible >>> line. >>> I believe that the following compatible line is sufficient >>> >>> compatible = "jedec,spi-nor"; >>> >>> >>> You might also want to consider "flash@0" or "nor@0" or "nor_flash@0", >>> or the like, rather than a chip-specific name. (I'm not a committer.) >>> >>> >>>> + >>>> + partitions { >>>> + compatible = "fixed-partitions"; >>>> + >>>> + partition@0 { >>>> + label = "0:SBL1"; >>>> + reg = <0x000000 0x040000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@40000 { >>>> + label = "0:MIBIB"; >>>> + reg = <0x040000 0x020000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@60000 { >>>> + label = "0:QSEE"; >>>> + reg = <0x060000 0x060000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@c0000 { >>>> + label = "0:CDT"; >>>> + reg = <0x0c0000 0x010000>; >>>> + read-only; >>>> + }; >>> >>> >>> Someone may rip on you for capitalization of labels. (I'm not a committer.) >>> >>> >>>> + >>>> + partition@d0000 { >>>> + label = "0:DDRPARAMS"; >>>> + reg = <0x0d0000 0x010000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@e0000 { >>>> + label = "u-boot-env"; >>>> + reg = <0x0e0000 0x010000>; >>>> + read-only; >>>> + }; >>> >>> >>> U-Boot environment may want/need to be writable >>> >>> >>>> + >>>> + partition@f0000 { >>>> + label = "u-boot"; >>>> + reg = <0x0f0000 0x080000>; >>>> + read-only; >>>> + }; >>>> + >>>> + partition@170000 { >>>> + label = "art"; >>>> + reg = <0x170000 0x010000>; >>>> + read-only; >>>> + }; >>>> + }; >>>> + }; >>>> + >>>> + mt29f@1 { >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + reg = <1>; >>>> + status = "okay"; >>>> + compatible = "spinand,mt29f"; >>>> + spi-max-frequency = <24000000>; >>> >>> >>> Same comment on "mt29f" vs. something generic and descriptive. >>> >>> >>> Converting to the upstream SPI-NAND driver here should be as simple as >>> >>> compatible = "spi-nand"; >>> >>> >>> >>>> + >>>> + partitions { >>>> + compatible = "fixed-partitions"; >>>> + >>>> + partition@0 { >>>> + label = "ubi"; >>>> + reg = <0x0000000 0x8000000>; >>>> + }; >>>> + }; >>>> + }; >>>> + }; >>>> + >>>> [...] >>> >>> >> >> -- >> Regards >> >> Daniel Danzberger >> embeDD GmbH, Alter Postplatz 2, CH-6370 Stans >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 25402b7eb4..dafd83234e 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -48,6 +48,7 @@ ipq40xx_setup_interfaces() ucidef_set_interface_lan "eth0" ;; avm,fritzrepeater-3000|\ + compex,wpj419|\ compex,wpj428) ucidef_set_interface_lan "eth0 eth1" ;; diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 2336ef3c7b..b18d17e422 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -71,6 +71,7 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; compex,wpj428 |\ + compex,wpj419 |\ engenius,eap1300 |\ openmesh,a42 |\ openmesh,a62 |\ @@ -134,6 +135,7 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; compex,wpj428 |\ + compex,wpj419 |\ engenius,eap1300 |\ openmesh,a42 |\ openmesh,a62 |\ diff --git a/target/linux/ipq40xx/config-4.19 b/target/linux/ipq40xx/config-4.19 index 8948b73ff7..3ee921abed 100644 --- a/target/linux/ipq40xx/config-4.19 +++ b/target/linux/ipq40xx/config-4.19 @@ -303,6 +303,9 @@ CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NAND=y CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPINAND_MT29F=y +CONFIG_MTD_SPINAND_GIGADEVICE=y +CONFIG_MTD_SPINAND_ONDIEECC=y CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_FIT_FW=y CONFIG_MTD_UBI=y diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi new file mode 100644 index 0000000000..169505973f --- /dev/null +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi @@ -0,0 +1,1142 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <dt-bindings/msm/msm-bus-ids.h> + +/ { + +soc { + ad_hoc_bus: ad-hoc-bus { + compatible = "qcom,msm-bus-device"; + reg = <0x580000 0x14000>, + <0x500000 0x11000>; + reg-names = "snoc-base", "pcnoc-base"; + + /*Buses*/ + + fab_pcnoc: fab-pcnoc { + cell-id = <MSM_BUS_FAB_PERIPH_NOC>; + label = "fab-pcnoc"; + qcom,fab-dev; + qcom,base-name = "pcnoc-base"; + qcom,bypass-qos-prg; + qcom,bus-type = <1>; + qcom,qos-off = <0x1000>; + qcom,base-offset = <0x0>; + clocks = <>; + }; + + fab_snoc: fab-snoc { + cell-id = <MSM_BUS_FAB_SYS_NOC>; + label = "fab-snoc"; + qcom,fab-dev; + qcom,base-name = "snoc-base"; + qcom,bypass-qos-prg; + qcom,bus-type = <1>; + qcom,qos-off = <0x80>; + qcom,base-offset = <0x0>; + clocks = <>; + }; + + /*Masters*/ + + mas_blsp_bam: mas-blsp-bam { + cell-id = <MSM_BUS_MASTER_BLSP_BAM>; + label = "mas-blsp-bam"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&pcnoc_m_0>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_BLSP_BAM>; + qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg + &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg + &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg + &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg + &slv_srif &slv_prng &slv_qdss_cfg + &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt + &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg + &slv_boot_rom &slv_security &slv_spdm + &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg + &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl + &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg + &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg + &slv_sdcc_cfg &slv_snoc_cfg>; + }; + + mas_usb2_bam: mas-usb2-bam { + cell-id = <MSM_BUS_MASTER_USB2_BAM>; + label = "mas-usb2-bam"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,qport = <15>; + qcom,qos-mode = "fixed"; + qcom,connections = <&slv_pcnoc_snoc>; + qcom,prio1 = <1>; + qcom,prio0 = <1>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_USB2_BAM>; + qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg + &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg + &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg + &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg + &slv_srif &slv_prng &slv_qdss_cfg + &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt + &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg + &slv_boot_rom &slv_security &slv_spdm + &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg + &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl + &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg + &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg + &slv_sdcc_cfg &slv_snoc_cfg>; + }; + + mas_adss_dma0: mas-adss-dma0 { + cell-id = <MSM_BUS_MASTER_ADDS_DMA0>; + label = "mas-adss-dma0"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&pcnoc_m_1>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA0>; + qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg + &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg + &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg + &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg + &slv_srif &slv_prng &slv_qdss_cfg + &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt + &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg + &slv_boot_rom &slv_security &slv_spdm + &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg + &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl + &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg + &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg + &slv_sdcc_cfg &slv_snoc_cfg>; + }; + + mas_adss_dma1: mas-adss-dma1 { + cell-id = <MSM_BUS_MASTER_ADDS_DMA1>; + label = "mas-adss-dma1"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&pcnoc_m_1>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA1>; + qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg + &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg + &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg + &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg + &slv_srif &slv_prng &slv_qdss_cfg + &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt + &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg + &slv_boot_rom &slv_security &slv_spdm + &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg + &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl + &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg + &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg + &slv_sdcc_cfg &slv_snoc_cfg>; + }; + + mas_adss_dma2: mas-adss-dma2 { + cell-id = <MSM_BUS_MASTER_ADDS_DMA2>; + label = "mas-adss-dma2"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&pcnoc_m_1>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA2>; + qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg + &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg + &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg + &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg + &slv_srif &slv_prng &slv_qdss_cfg + &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt + &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg + &slv_boot_rom &slv_security &slv_spdm + &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg + &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl + &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg + &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg + &slv_sdcc_cfg &slv_snoc_cfg>; + }; + + mas_adss_dma3: mas-adss-dma3 { + cell-id = <MSM_BUS_MASTER_ADDS_DMA3>; + label = "mas-adss-dma3"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&pcnoc_m_1>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_ADSS_DMA3>; + qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg + &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg + &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg + &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg + &slv_srif &slv_prng &slv_qdss_cfg + &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt + &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg + &slv_boot_rom &slv_security &slv_spdm + &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg + &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl + &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg + &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg + &slv_sdcc_cfg &slv_snoc_cfg>; + }; + + mas_qpic_bam: mas-qpic-bam { + cell-id = <MSM_BUS_MASTER_QPIC_BAM>; + label = "mas-qpic-bam"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&pcnoc_m_0>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_QPIC_BAM>; + qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg + &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg + &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg + &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg + &slv_srif &slv_prng &slv_qdss_cfg + &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt + &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg + &slv_boot_rom &slv_security &slv_spdm + &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg + &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl + &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg + &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg + &slv_sdcc_cfg &slv_snoc_cfg>; + }; + + mas_spdm: mas-spdm { + cell-id = <MSM_BUS_MASTER_SPDM>; + label = "mas-spdm"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&pcnoc_m_0>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_SPDM>; + qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg + &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg + &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg + &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg + &slv_srif &slv_prng &slv_qdss_cfg + &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt + &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg + &slv_boot_rom &slv_security &slv_spdm + &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg + &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl + &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg + &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg + &slv_sdcc_cfg &slv_snoc_cfg>; + }; + + mas_pcnoc_cfg: mas-pcnoc-cfg { + cell-id = <MSM_BUS_MASTER_PNOC_CFG>; + label = "mas-pcnoc-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&slv_srvc_pcnoc>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_CFG>; + }; + + mas_tic: mas-tic { + cell-id = <MSM_BUS_MASTER_TIC>; + label = "mas-tic"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&pcnoc_int_0 &slv_pcnoc_snoc>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_TIC>; + }; + + mas_sdcc_bam: mas-sdcc-bam { + cell-id = <MSM_BUS_MASTER_SDCC_BAM>; + label = "mas-sdcc-bam"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,qport = <14>; + qcom,qos-mode = "fixed"; + qcom,connections = <&slv_pcnoc_snoc>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_SDCC_BAM>; + qcom,blacklist = <&slv_tcsr &slv_mdio &slv_adss_cfg + &slv_fephy_cfg &slv_wss1_apu_cfg &slv_ddrc_mpu1_cfg + &slv_ddrc_mpu0_cfg &slv_qpic_cfg &slv_ddrc_cfg + &slv_pcnoc_cfg &slv_ess_apu_cfg &slv_imem_cfg + &slv_srif &slv_prng &slv_qdss_cfg + &slv_wss0_apu_cfg &slv_ddrc_apu_cfg &slv_gcnt + &slv_tlmm &slv_wss0_vmidmt_cfg &slv_prng_apu_cfg + &slv_boot_rom &slv_security &slv_spdm + &slv_pcnoc_mpu_cfg &slv_ddrc_mpu2_cfg &slv_ess_vmidmt_cfg + &slv_qhss_apu_cfg &slv_adss_vmidmt_cfg &slv_clk_ctl + &slv_adss_apu &slv_blsp_cfg &slv_usb2_cfg + &slv_srvc_pcnoc &slv_snoc_mpu_cfg &slv_wss1_vmidmt_cfg + &slv_sdcc_cfg &slv_snoc_cfg>; + }; + + mas_snoc_pcnoc: mas-snoc-pcnoc { + cell-id = <MSM_BUS_SNOC_PNOC_MAS>; + label = "mas-snoc-pcnoc"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,qport = <16>; + qcom,qos-mode = "fixed"; + qcom,connections = <&pcnoc_int_0>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_SNOC_PCNOC>; + }; + + mas_qdss_dap: mas-qdss-dap { + cell-id = <MSM_BUS_MASTER_QDSS_DAP>; + label = "mas-qdss-dap"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&pcnoc_int_0 &slv_pcnoc_snoc>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_QDSS_DAP>; + }; + + mas_ddrc_snoc: mas-ddrc-snoc { + cell-id = <MSM_BUS_MASTER_DDRC_SNOC>; + label = "mas-ddrc-snoc"; + qcom,buswidth = <16>; + qcom,ap-owned; + qcom,connections = <&snoc_int_0 &snoc_int_1 + &slv_pcie>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_DDRC_SNOC>; + qcom,blacklist = <&slv_snoc_ddrc_m1 &slv_srvc_snoc>; + }; + + mas_wss_0: mas-wss-0 { + cell-id = <MSM_BUS_MASTER_WSS_0>; + label = "mas-wss-0"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,qport = <26>; + qcom,qos-mode = "fixed"; + qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_WSS_0>; + qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie + &slv_wss1_cfg &slv_wss0_cfg &slv_crypto_cfg + &slv_srvc_snoc>; + }; + + mas_wss_1: mas-wss-1 { + cell-id = <MSM_BUS_MASTER_WSS_1>; + label = "mas-wss-1"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,qport = <27>; + qcom,qos-mode = "fixed"; + qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_WSS_1>; + qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie + &slv_wss1_cfg &slv_wss0_cfg &slv_crypto_cfg + &slv_srvc_snoc>; + }; + + mas_crypto: mas-crypto { + cell-id = <MSM_BUS_MASTER_CRYPTO>; + label = "mas-crypto"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,qport = <5>; + qcom,qos-mode = "fixed"; + qcom,connections = <&snoc_int_0 &snoc_int_1 + &slv_snoc_ddrc_m1>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_CRYPTO>; + qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss + &slv_pcie &slv_qdss_stm &slv_crypto_cfg + &slv_srvc_snoc>; + }; + + mas_ess: mas-ess { + cell-id = <MSM_BUS_MASTER_ESS>; + label = "mas-ess"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,qport = <44>; + qcom,qos-mode = "fixed"; + qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_ESS>; + qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss + &slv_pcie &slv_qdss_stm &slv_wss1_cfg + &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>; + }; + + mas_pcie: mas-pcie { + cell-id = <MSM_BUS_MASTER_PCIE>; + label = "mas-pcie"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,qport = <6>; + qcom,qos-mode = "fixed"; + qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCIE>; + qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_pcie + &slv_qdss_stm &slv_wss1_cfg &slv_wss0_cfg + &slv_crypto_cfg &slv_srvc_snoc>; + }; + + mas_usb3: mas-usb3 { + cell-id = <MSM_BUS_MASTER_USB3>; + label = "mas-usb3"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,qport = <7>; + qcom,qos-mode = "fixed"; + qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_USB3>; + qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss + &slv_pcie &slv_qdss_stm &slv_wss1_cfg + &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>; + }; + + mas_qdss_etr: mas-qdss-etr { + cell-id = <MSM_BUS_MASTER_QDSS_ETR>; + label = "mas-qdss-etr"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,qport = <544>; + qcom,qos-mode = "fixed"; + qcom,connections = <&qdss_int>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_QDSS_ETR>; + qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss + &slv_pcie &slv_qdss_stm &slv_wss1_cfg + &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>; + }; + + mas_qdss_bamndp: mas-qdss-bamndp { + cell-id = <MSM_BUS_MASTER_QDSS_BAMNDP>; + label = "mas-qdss-bamndp"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,qport = <576>; + qcom,qos-mode = "fixed"; + qcom,connections = <&qdss_int>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_QDSS_BAMNDP>; + qcom,blacklist = <&slv_usb3_cfg &slv_ess_cfg &slv_a7ss + &slv_pcie &slv_qdss_stm &slv_wss1_cfg + &slv_wss0_cfg &slv_crypto_cfg &slv_srvc_snoc>; + }; + + mas_pcnoc_snoc: mas-pcnoc-snoc { + cell-id = <MSM_BUS_PNOC_SNOC_MAS>; + label = "mas-pcnoc-snoc"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,qport = <384>; + qcom,qos-mode = "fixed"; + qcom,connections = <&snoc_int_0 &snoc_int_1 + &slv_snoc_ddrc_m1>; + qcom,prio1 = <0>; + qcom,prio0 = <0>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PNOC_SNOC>; + qcom,blacklist = <&slv_srvc_snoc>; + }; + + mas_snoc_cfg: mas-snoc-cfg { + cell-id = <MSM_BUS_MASTER_QDSS_SNOC_CFG>; + label = "mas-snoc-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&slv_srvc_snoc>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_QDSS_SNOC_CFG>; + }; + + /*Internal nodes*/ + + + pcnoc_m_0: pcnoc-m-0 { + cell-id = <MSM_BUS_PNOC_M_0>; + label = "pcnoc-m-0"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,qport = <12>; + qcom,qos-mode = "fixed"; + qcom,connections = <&slv_pcnoc_snoc>; + qcom,prio1 = <1>; + qcom,prio0 = <1>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_M_0>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_M_0>; + }; + + pcnoc_m_1: pcnoc-m-1 { + cell-id = <MSM_BUS_PNOC_M_1>; + label = "pcnoc-m-1"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,qport = <13>; + qcom,qos-mode = "fixed"; + qcom,connections = <&slv_pcnoc_snoc>; + qcom,prio1 = <1>; + qcom,prio0 = <1>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_M_1>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_M_1>; + }; + + pcnoc_int_0: pcnoc-int-0 { + cell-id = <MSM_BUS_PNOC_INT_0>; + label = "pcnoc-int-0"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,connections = < &pcnoc_s_1 &pcnoc_s_2 &pcnoc_s_0 + &pcnoc_s_4 &pcnoc_s_5 + &pcnoc_s_6 &pcnoc_s_7 + &pcnoc_s_8 &pcnoc_s_9 + &pcnoc_s_3>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_INT_0>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_INT_0>; + }; + + pcnoc_s_0: pcnoc-s-0 { + cell-id = <MSM_BUS_PNOC_SLV_0>; + label = "pcnoc-s-0"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&slv_clk_ctl &slv_tcsr &slv_security + &slv_tlmm>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_0>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_0>; + }; + + pcnoc_s_1: pcnoc-s-1 { + cell-id = <MSM_BUS_PNOC_SLV_1>; + label = "pcnoc-s-1"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = < &slv_prng_apu_cfg &slv_prng&slv_imem_cfg>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_1>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_1>; + }; + + pcnoc_s_2: pcnoc-s-2 { + cell-id = <MSM_BUS_PNOC_SLV_2>; + label = "pcnoc-s-2"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = < &slv_spdm &slv_pcnoc_mpu_cfg &slv_pcnoc_cfg + &slv_boot_rom>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_2>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_2>; + }; + + pcnoc_s_3: pcnoc-s-3 { + cell-id = <MSM_BUS_PNOC_SLV_3>; + label = "pcnoc-s-3"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = < &slv_qdss_cfg&slv_gcnt &slv_snoc_cfg + &slv_snoc_mpu_cfg>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_3>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_3>; + }; + + pcnoc_s_4: pcnoc-s-4 { + cell-id = <MSM_BUS_PNOC_SLV_4>; + label = "pcnoc-s-4"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&slv_adss_cfg &slv_adss_vmidmt_cfg &slv_adss_apu>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_4>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_4>; + }; + + pcnoc_s_5: pcnoc-s-5 { + cell-id = <MSM_BUS_PNOC_SLV_5>; + label = "pcnoc-s-5"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = <&slv_qhss_apu_cfg &slv_fephy_cfg &slv_mdio + &slv_srif>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_5>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_5>; + }; + + pcnoc_s_6: pcnoc-s-6 { + cell-id = <MSM_BUS_PNOC_SLV_6>; + label = "pcnoc-s-6"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = < &slv_ddrc_mpu0_cfg &slv_ddrc_apu_cfg &slv_ddrc_mpu2_cfg + &slv_ddrc_cfg &slv_ddrc_mpu1_cfg>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_6>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_6>; + }; + + pcnoc_s_7: pcnoc-s-7 { + cell-id = <MSM_BUS_PNOC_SLV_7>; + label = "pcnoc-s-7"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = < &slv_ess_apu_cfg &slv_usb2_cfg&slv_ess_vmidmt_cfg>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_7>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_7>; + }; + + pcnoc_s_8: pcnoc-s-8 { + cell-id = <MSM_BUS_PNOC_SLV_8>; + label = "pcnoc-s-8"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = < &slv_sdcc_cfg &slv_qpic_cfg&slv_blsp_cfg>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_8>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_8>; + }; + + pcnoc_s_9: pcnoc-s-9 { + cell-id = <MSM_BUS_PNOC_SLV_9>; + label = "pcnoc-s-9"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,connections = < &slv_wss1_apu_cfg &slv_wss1_vmidmt_cfg&slv_wss0_vmidmt_cfg + &slv_wss0_apu_cfg>; + qcom,bus-dev = <&fab_pcnoc>; + qcom,mas-rpm-id = <ICBID_MASTER_PCNOC_S_9>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_S_9>; + }; + + snoc_int_0: snoc-int-0 { + cell-id = <MSM_BUS_SNOC_INT_0>; + label = "snoc-int-0"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,connections = < &slv_ocimem&slv_qdss_stm>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_SNOC_INT_0>; + qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_INT_0>; + }; + + snoc_int_1: snoc-int-1 { + cell-id = <MSM_BUS_SNOC_INT_1>; + label = "snoc-int-1"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,connections = < &slv_crypto_cfg &slv_a7ss &slv_ess_cfg + &slv_usb3_cfg &slv_wss1_cfg + &slv_wss0_cfg>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_SNOC_INT_1>; + qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_INT_1>; + }; + + qdss_int: qdss-int { + cell-id = <MSM_BUS_SNOC_QDSS_INT>; + label = "qdss-int"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,connections = <&snoc_int_0 &slv_snoc_ddrc_m1>; + qcom,bus-dev = <&fab_snoc>; + qcom,mas-rpm-id = <ICBID_MASTER_QDSS_INT>; + qcom,slv-rpm-id = <ICBID_SLAVE_QDSS_INT>; + }; + /*Slaves*/ + + slv_clk_ctl:slv-clk-ctl { + cell-id = <MSM_BUS_SLAVE_CLK_CTL>; + label = "slv-clk-ctl"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_CLK_CTL>; + }; + + slv_security:slv-security { + cell-id = <MSM_BUS_SLAVE_SECURITY>; + label = "slv-security"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_SECURITY>; + }; + + slv_tcsr:slv-tcsr { + cell-id = <MSM_BUS_SLAVE_TCSR>; + label = "slv-tcsr"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_TCSR>; + }; + + slv_tlmm:slv-tlmm { + cell-id = <MSM_BUS_SLAVE_TLMM>; + label = "slv-tlmm"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_TLMM>; + }; + + slv_imem_cfg:slv-imem-cfg { + cell-id = <MSM_BUS_SLAVE_IMEM_CFG>; + label = "slv-imem-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_IMEM_CFG>; + }; + + slv_prng:slv-prng { + cell-id = <MSM_BUS_SLAVE_PRNG>; + label = "slv-prng"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_PRNG>; + }; + + slv_prng_apu_cfg:slv-prng-apu-cfg { + cell-id = <MSM_BUS_SLAVE_PRNG_APU_CFG>; + label = "slv-prng-apu-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_PRNG_APU_CFG>; + }; + + slv_boot_rom:slv-boot-rom { + cell-id = <MSM_BUS_SLAVE_BOOT_ROM>; + label = "slv-boot-rom"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_BOOT_ROM>; + }; + + slv_spdm:slv-spdm { + cell-id = <MSM_BUS_SLAVE_SPDM_WRAPPER>; + label = "slv-spdm"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_SPDM_WRAPPER>; + }; + + slv_pcnoc_cfg:slv-pcnoc-cfg { + cell-id = <MSM_BUS_SLAVE_PNOC_CFG>; + label = "slv-pcnoc-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_PNOC_CFG>; + }; + + slv_pcnoc_mpu_cfg:slv-pcnoc-mpu-cfg { + cell-id = <MSM_BUS_SLAVE_PERIPH_MPU_CFG>; + label = "slv-pcnoc-mpu-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_PERIPH_MPU_CFG>; + }; + + slv_gcnt:slv-gcnt { + cell-id = <MSM_BUS_SLAVE_GCNT>; + label = "slv-gcnt"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_GCNT>; + }; + + slv_qdss_cfg:slv-qdss-cfg { + cell-id = <MSM_BUS_SLAVE_QDSS_CFG>; + label = "slv-qdss-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_QDSS_CFG>; + }; + + slv_snoc_cfg:slv-snoc-cfg { + cell-id = <MSM_BUS_SLAVE_SNOC_CFG>; + label = "slv-snoc-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_CFG>; + }; + + slv_snoc_mpu_cfg:slv-snoc-mpu-cfg { + cell-id = <MSM_BUS_SLAVE_SNOC_MPU_CFG>; + label = "slv-snoc-mpu-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_MPU_CFG>; + }; + + slv_adss_cfg:slv-adss-cfg { + cell-id = <MSM_BUS_SLAVE_ADSS_CFG>; + label = "slv-adss-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_ADSS_CFG>; + }; + + slv_adss_apu:slv-adss-apu { + cell-id = <MSM_BUS_SLAVE_ADSS_VMIDMT_CFG>; + label = "slv-adss-apu"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_ADSS_APU>; + }; + + slv_adss_vmidmt_cfg:slv-adss-vmidmt-cfg { + cell-id = <MSM_BUS_SLAVE_ADSS_VMIDMT_CFG>; + label = "slv-adss-vmidmt-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_ADSS_VMIDMT_CFG>; + }; + + slv_qhss_apu_cfg:slv-qhss-apu-cfg { + cell-id = <MSM_BUS_SLAVE_QHSS_APU_CFG>; + label = "slv-qhss-apu-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_QHSS_APU_CFG>; + }; + + slv_mdio:slv-mdio { + cell-id = <MSM_BUS_SLAVE_MDIO>; + label = "slv-mdio"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_MDIO>; + }; + + slv_fephy_cfg:slv-fephy-cfg { + cell-id = <MSM_BUS_SLAVE_FEPHY_CFG>; + label = "slv-fephy-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_FEPHY_CFG>; + }; + + slv_srif:slv-srif { + cell-id = <MSM_BUS_SLAVE_SRIF>; + label = "slv-srif"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_SRIF>; + }; + + slv_ddrc_cfg:slv-ddrc-cfg { + cell-id = <MSM_BUS_SLAVE_DDRC_CFG>; + label = "slv-ddrc-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_CFG>; + }; + + slv_ddrc_apu_cfg:slv-ddrc-apu-cfg { + cell-id = <MSM_BUS_SLAVE_DDRC_APU_CFG>; + label = "slv-ddrc-apu-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_APU_CFG>; + }; + + slv_ddrc_mpu0_cfg:slv-ddrc-mpu0-cfg { + cell-id = <MSM_BUS_SLAVE_MPU0_CFG>; + label = "slv-ddrc-mpu0-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_MPU0_CFG>; + }; + + slv_ddrc_mpu1_cfg:slv-ddrc-mpu1-cfg { + cell-id = <MSM_BUS_SLAVE_MPU1_CFG>; + label = "slv-ddrc-mpu1-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_MPU1_CFG>; + }; + + slv_ddrc_mpu2_cfg:slv-ddrc-mpu2-cfg { + cell-id = <MSM_BUS_SLAVE_MPU2_CFG>; + label = "slv-ddrc-mpu2-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_DDRC_MPU2_CFG>; + }; + + slv_ess_vmidmt_cfg:slv-ess-vmidmt-cfg { + cell-id = <MSM_BUS_SLAVE_ESS_VMIDMT_CFG>; + label = "slv-ess-vmidmt-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_ESS_VMIDMT_CFG>; + }; + + slv_ess_apu_cfg:slv-ess-apu-cfg { + cell-id = <MSM_BUS_SLAVE_ESS_APU_CFG>; + label = "slv-ess-apu-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_ESS_APU_CFG>; + }; + + slv_usb2_cfg:slv-usb2-cfg { + cell-id = <MSM_BUS_SLAVE_USB2_CFG>; + label = "slv-usb2-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_USB2_CFG>; + }; + + slv_blsp_cfg:slv-blsp-cfg { + cell-id = <MSM_BUS_SLAVE_BLSP_CFG>; + label = "slv-blsp-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_BLSP_CFG>; + }; + + slv_qpic_cfg:slv-qpic-cfg { + cell-id = <MSM_BUS_SLAVE_QPIC_CFG>; + label = "slv-qpic-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_QPIC_CFG>; + }; + + slv_sdcc_cfg:slv-sdcc-cfg { + cell-id = <MSM_BUS_SLAVE_SDCC_CFG>; + label = "slv-sdcc-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_SDCC_CFG>; + }; + + slv_wss0_vmidmt_cfg:slv-wss0-vmidmt-cfg { + cell-id = <MSM_BUS_SLAVE_WSS0_VMIDMT_CFG>; + label = "slv-wss0-vmidmt-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_WSS0_VMIDMT_CFG>; + }; + + slv_wss0_apu_cfg:slv-wss0-apu-cfg { + cell-id = <MSM_BUS_SLAVE_WSS0_APU_CFG>; + label = "slv-wss0-apu-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_WSS0_APU_CFG>; + }; + + slv_wss1_vmidmt_cfg:slv-wss1-vmidmt-cfg { + cell-id = <MSM_BUS_SLAVE_WSS1_VMIDMT_CFG>; + label = "slv-wss1-vmidmt-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_WSS1_VMIDMT_CFG>; + }; + + slv_wss1_apu_cfg:slv-wss1-apu-cfg { + cell-id = <MSM_BUS_SLAVE_WSS1_APU_CFG>; + label = "slv-wss1-apu-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_WSS1_APU_CFG>; + }; + + slv_pcnoc_snoc:slv-pcnoc-snoc { + cell-id = <MSM_BUS_PNOC_SNOC_SLV>; + label = "slv-pcnoc-snoc"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCNOC_SNOC>; + }; + + slv_srvc_pcnoc:slv-srvc-pcnoc { + cell-id = <MSM_BUS_SLAVE_SRVC_PCNOC>; + label = "slv-srvc-pcnoc"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_pcnoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_SRVC_PCNOC>; + }; + + slv_snoc_ddrc_m1:slv-snoc-ddrc-m1 { + cell-id = <MSM_BUS_SLAVE_SNOC_DDRC>; + label = "slv-snoc-ddrc-m1"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_SNOC_DDRC>; + }; + + slv_a7ss:slv-a7ss { + cell-id = <MSM_BUS_SLAVE_A7SS>; + label = "slv-a7ss"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_A7SS>; + }; + + slv_ocimem:slv-ocimem { + cell-id = <MSM_BUS_SLAVE_OCIMEM>; + label = "slv-ocimem"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_OCIMEM>; + }; + + slv_wss0_cfg:slv-wss0-cfg { + cell-id = <MSM_BUS_SLAVE_WSS0_CFG>; + label = "slv-wss0-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_WSS0_CFG>; + }; + + slv_wss1_cfg:slv-wss1-cfg { + cell-id = <MSM_BUS_SLAVE_WSS1_CFG>; + label = "slv-wss1-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_WSS1_CFG>; + }; + + slv_pcie:slv-pcie { + cell-id = <MSM_BUS_SLAVE_PCIE>; + label = "slv-pcie"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_PCIE>; + }; + + slv_usb3_cfg:slv-usb3-cfg { + cell-id = <MSM_BUS_SLAVE_USB3_CFG>; + label = "slv-usb3-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_USB3_CFG>; + }; + + slv_crypto_cfg:slv-crypto-cfg { + cell-id = <MSM_BUS_SLAVE_CRYPTO_CFG>; + label = "slv-crypto-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_CRYPTO_CFG>; + }; + + slv_ess_cfg:slv-ess-cfg { + cell-id = <MSM_BUS_SLAVE_ESS_CFG>; + label = "slv-ess-cfg"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_ESS_CFG>; + }; + + slv_qdss_stm:slv-qdss-stm { + cell-id = <MSM_BUS_SLAVE_QDSS_STM>; + label = "slv-qdss-stm"; + qcom,buswidth = <4>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_QDSS_STM>; + }; + + slv_srvc_snoc:slv-srvc-snoc { + cell-id = <MSM_BUS_SLAVE_SRVC_SNOC>; + label = "slv-srvc-snoc"; + qcom,buswidth = <8>; + qcom,ap-owned; + qcom,bus-dev = <&fab_snoc>; + qcom,slv-rpm-id = <ICBID_SLAVE_SRVC_SNOC>; + }; + }; +}; + +}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts new file mode 100644 index 0000000000..5553bbd166 --- /dev/null +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts @@ -0,0 +1,371 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" +#include "qcom-ipq4019-bus.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/soc/qcom,tcsr.h> + +/ { + model = "Compex WPJ419"; + compatible = "compex,wpj419", "qcom,ipq4019"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + reserved-memory { + ranges; + rsvd1@87000000 { + /* Reserved for other subsystem */ + reg = <0x87000000 0x500000>; + no-map; + }; + wifi_dump@87500000 { + reg = <0x87500000 0x600000>; + no-map; + }; + + rsvd2@87B00000 { + /* Reserved for other subsystem */ + reg = <0x87B00000 0x500000>; + no-map; + }; + }; + + chosen { + bootargs-append = " clk_ignore_unused"; + }; + + soc { + pinctrl@1000000 { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + serial_1_pins: serial1_pinmux { + mux { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + bias-disable; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + bias-disable; + output-high; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + mux { + pins = "gpio20", "gpio21"; + function = "blsp_i2c0"; + bias-disable; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio52", "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + + led_0_pins: led0_pinmux { + mux_1 { + pins = "gpio36"; + function = "led0"; + bias-pull-down; + }; + mux_2 { + pins = "gpio40"; + function = "led4"; + bias-pull-down; + }; + }; + }; + + blsp_dma: dma@7884000 { + status = "okay"; + }; + + spi_0: spi@78b5000 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; + num-cs = <2>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + linux,modalias = "m25p80", "n25q128a11"; + compatible = "jedec,spi-nor", "n25q128a11"; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + + partition@0 { + label = "0:SBL1"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "0:MIBIB"; + reg = <0x040000 0x020000>; + read-only; + }; + + partition@60000 { + label = "0:QSEE"; + reg = <0x060000 0x060000>; + read-only; + }; + + partition@c0000 { + label = "0:CDT"; + reg = <0x0c0000 0x010000>; + read-only; + }; + + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0x0d0000 0x010000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x0e0000 0x010000>; + read-only; + }; + + partition@f0000 { + label = "u-boot"; + reg = <0x0f0000 0x080000>; + read-only; + }; + + partition@170000 { + label = "art"; + reg = <0x170000 0x010000>; + read-only; + }; + }; + }; + + mt29f@1 { + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + status = "okay"; + compatible = "spinand,mt29f"; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + + partition@0 { + label = "ubi"; + reg = <0x0000000 0x8000000>; + }; + }; + }; + }; + + mdio@90000 { + status = "okay"; + phy-reset-gpio = <&tlmm 47 0>; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = <TCSR_ESS_PSGMII>; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; + }; + + i2c_0: i2c@78b7000 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "ok"; + }; + + serial@78af000 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + usb3_ss_phy: ssphy@9a000 { + status = "okay"; + }; + + usb3_hs_phy: hsphy@a6000 { + status = "okay"; + }; + + usb3: usb3@8af8800 { + status = "okay"; + }; + + usb2_hs_phy: hsphy@a8000 { + status = "okay"; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + cryptobam: dma@8e04000 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + switch_lan_bmp = <0x1e>; + switch_wan_bmp = <0x20>; + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + + qpic_bam: dma@7984000 { + status = "okay"; + }; + + pcie0: pci@40000000 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + }; + + nand: qpic-nand@79b0000 { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + }; +}; + +&gmac0 { +qcom,phy_mdio_addr = <4>; +qcom,poll_required = <1>; +qcom,forced_speed = <1000>; +qcom,forced_duplex = <1>; +vlan_tag = <2 0x20>; +}; + +&gmac1 { +qcom,phy_mdio_addr = <3>; +qcom,poll_required = <1>; +qcom,forced_speed = <1000>; +qcom,forced_duplex = <1>; +vlan_tag = <1 0x10>; +}; + +&wifi0 { +status = "okay"; +}; + +&wifi1 { +status = "okay"; +}; diff --git a/target/linux/ipq40xx/files-4.19/include/dt-bindings/msm/msm-bus-ids.h b/target/linux/ipq40xx/files-4.19/include/dt-bindings/msm/msm-bus-ids.h new file mode 100644 index 0000000000..da0b83e831 --- /dev/null +++ b/target/linux/ipq40xx/files-4.19/include/dt-bindings/msm/msm-bus-ids.h @@ -0,0 +1,869 @@ +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MSM_BUS_IDS_H +#define __MSM_BUS_IDS_H + +/* Topology related enums */ +#define MSM_BUS_FAB_DEFAULT 0 +#define MSM_BUS_FAB_APPSS 0 +#define MSM_BUS_FAB_SYSTEM 1024 +#define MSM_BUS_FAB_MMSS 2048 +#define MSM_BUS_FAB_SYSTEM_FPB 3072 +#define MSM_BUS_FAB_CPSS_FPB 4096 + +#define MSM_BUS_FAB_BIMC 0 +#define MSM_BUS_FAB_SYS_NOC 1024 +#define MSM_BUS_FAB_MMSS_NOC 2048 +#define MSM_BUS_FAB_OCMEM_NOC 3072 +#define MSM_BUS_FAB_PERIPH_NOC 4096 +#define MSM_BUS_FAB_CONFIG_NOC 5120 +#define MSM_BUS_FAB_OCMEM_VNOC 6144 +#define MSM_BUS_FAB_MMSS_AHB 2049 +#define MSM_BUS_FAB_A0_NOC 6145 +#define MSM_BUS_FAB_A1_NOC 6146 +#define MSM_BUS_FAB_A2_NOC 6147 + +#define MSM_BUS_MASTER_FIRST 1 +#define MSM_BUS_MASTER_AMPSS_M0 1 +#define MSM_BUS_MASTER_AMPSS_M1 2 +#define MSM_BUS_APPSS_MASTER_FAB_MMSS 3 +#define MSM_BUS_APPSS_MASTER_FAB_SYSTEM 4 +#define MSM_BUS_SYSTEM_MASTER_FAB_APPSS 5 +#define MSM_BUS_MASTER_SPS 6 +#define MSM_BUS_MASTER_ADM_PORT0 7 +#define MSM_BUS_MASTER_ADM_PORT1 8 +#define MSM_BUS_SYSTEM_MASTER_ADM1_PORT0 9 +#define MSM_BUS_MASTER_ADM1_PORT1 10 +#define MSM_BUS_MASTER_LPASS_PROC 11 +#define MSM_BUS_MASTER_MSS_PROCI 12 +#define MSM_BUS_MASTER_MSS_PROCD 13 +#define MSM_BUS_MASTER_MSS_MDM_PORT0 14 +#define MSM_BUS_MASTER_LPASS 15 +#define MSM_BUS_SYSTEM_MASTER_CPSS_FPB 16 +#define MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB 17 +#define MSM_BUS_SYSTEM_MASTER_MMSS_FPB 18 +#define MSM_BUS_MASTER_ADM1_CI 19 +#define MSM_BUS_MASTER_ADM0_CI 20 +#define MSM_BUS_MASTER_MSS_MDM_PORT1 21 +#define MSM_BUS_MASTER_MDP_PORT0 22 +#define MSM_BUS_MASTER_MDP_PORT1 23 +#define MSM_BUS_MMSS_MASTER_ADM1_PORT0 24 +#define MSM_BUS_MASTER_ROTATOR 25 +#define MSM_BUS_MASTER_GRAPHICS_3D 26 +#define MSM_BUS_MASTER_JPEG_DEC 27 +#define MSM_BUS_MASTER_GRAPHICS_2D_CORE0 28 +#define MSM_BUS_MASTER_VFE 29 +#define MSM_BUS_MASTER_VPE 30 +#define MSM_BUS_MASTER_JPEG_ENC 31 +#define MSM_BUS_MASTER_GRAPHICS_2D_CORE1 32 +#define MSM_BUS_MMSS_MASTER_APPS_FAB 33 +#define MSM_BUS_MASTER_HD_CODEC_PORT0 34 +#define MSM_BUS_MASTER_HD_CODEC_PORT1 35 +#define MSM_BUS_MASTER_SPDM 36 +#define MSM_BUS_MASTER_RPM 37 +#define MSM_BUS_MASTER_MSS 38 +#define MSM_BUS_MASTER_RIVA 39 +#define MSM_BUS_MASTER_SNOC_VMEM 40 +#define MSM_BUS_MASTER_MSS_SW_PROC 41 +#define MSM_BUS_MASTER_MSS_FW_PROC 42 +#define MSM_BUS_MASTER_HMSS 43 +#define MSM_BUS_MASTER_GSS_NAV 44 +#define MSM_BUS_MASTER_PCIE 45 +#define MSM_BUS_MASTER_SATA 46 +#define MSM_BUS_MASTER_CRYPTO 47 +#define MSM_BUS_MASTER_VIDEO_CAP 48 +#define MSM_BUS_MASTER_GRAPHICS_3D_PORT1 49 +#define MSM_BUS_MASTER_VIDEO_ENC 50 +#define MSM_BUS_MASTER_VIDEO_DEC 51 +#define MSM_BUS_MASTER_LPASS_AHB 52 +#define MSM_BUS_MASTER_QDSS_BAM 53 +#define MSM_BUS_MASTER_SNOC_CFG 54 +#define MSM_BUS_MASTER_CRYPTO_CORE0 55 +#define MSM_BUS_MASTER_CRYPTO_CORE1 56 +#define MSM_BUS_MASTER_MSS_NAV 57 +#define MSM_BUS_MASTER_OCMEM_DMA 58 +#define MSM_BUS_MASTER_WCSS 59 +#define MSM_BUS_MASTER_QDSS_ETR 60 +#define MSM_BUS_MASTER_USB3 61 +#define MSM_BUS_MASTER_JPEG 62 +#define MSM_BUS_MASTER_VIDEO_P0 63 +#define MSM_BUS_MASTER_VIDEO_P1 64 +#define MSM_BUS_MASTER_MSS_PROC 65 +#define MSM_BUS_MASTER_JPEG_OCMEM 66 +#define MSM_BUS_MASTER_MDP_OCMEM 67 +#define MSM_BUS_MASTER_VIDEO_P0_OCMEM 68 +#define MSM_BUS_MASTER_VIDEO_P1_OCMEM 69 +#define MSM_BUS_MASTER_VFE_OCMEM 70 +#define MSM_BUS_MASTER_CNOC_ONOC_CFG 71 +#define MSM_BUS_MASTER_RPM_INST 72 +#define MSM_BUS_MASTER_RPM_DATA 73 +#define MSM_BUS_MASTER_RPM_SYS 74 +#define MSM_BUS_MASTER_DEHR 75 +#define MSM_BUS_MASTER_QDSS_DAP 76 +#define MSM_BUS_MASTER_TIC 77 +#define MSM_BUS_MASTER_SDCC_1 78 +#define MSM_BUS_MASTER_SDCC_3 79 +#define MSM_BUS_MASTER_SDCC_4 80 +#define MSM_BUS_MASTER_SDCC_2 81 +#define MSM_BUS_MASTER_TSIF 82 +#define MSM_BUS_MASTER_BAM_DMA 83 +#define MSM_BUS_MASTER_BLSP_2 84 +#define MSM_BUS_MASTER_USB_HSIC 85 +#define MSM_BUS_MASTER_BLSP_1 86 +#define MSM_BUS_MASTER_USB_HS 87 +#define MSM_BUS_MASTER_PNOC_CFG 88 +#define MSM_BUS_MASTER_V_OCMEM_GFX3D 89 +#define MSM_BUS_MASTER_IPA 90 +#define MSM_BUS_MASTER_QPIC 91 +#define MSM_BUS_MASTER_MDPE 92 +#define MSM_BUS_MASTER_USB_HS2 93 +#define MSM_BUS_MASTER_VPU 94 +#define MSM_BUS_MASTER_UFS 95 +#define MSM_BUS_MASTER_BCAST 96 +#define MSM_BUS_MASTER_CRYPTO_CORE2 97 +#define MSM_BUS_MASTER_EMAC 98 +#define MSM_BUS_MASTER_VPU_1 99 +#define MSM_BUS_MASTER_PCIE_1 100 +#define MSM_BUS_MASTER_USB3_1 101 +#define MSM_BUS_MASTER_CNOC_MNOC_MMSS_CFG 102 +#define MSM_BUS_MASTER_CNOC_MNOC_CFG 103 +#define MSM_BUS_MASTER_TCU_0 104 +#define MSM_BUS_MASTER_TCU_1 105 +#define MSM_BUS_MASTER_CPP 106 +#define MSM_BUS_MASTER_AUDIO 107 +#define MSM_BUS_MASTER_PCIE_2 108 +#define MSM_BUS_MASTER_BLSP_BAM 109 +#define MSM_BUS_MASTER_USB2_BAM 110 +#define MSM_BUS_MASTER_ADDS_DMA0 111 +#define MSM_BUS_MASTER_ADDS_DMA1 112 +#define MSM_BUS_MASTER_ADDS_DMA2 113 +#define MSM_BUS_MASTER_ADDS_DMA3 114 +#define MSM_BUS_MASTER_QPIC_BAM 115 +#define MSM_BUS_MASTER_SDCC_BAM 116 +#define MSM_BUS_MASTER_DDRC_SNOC 117 +#define MSM_BUS_MASTER_WSS_0 118 +#define MSM_BUS_MASTER_WSS_1 119 +#define MSM_BUS_MASTER_ESS 120 +#define MSM_BUS_MASTER_QDSS_BAMNDP 121 +#define MSM_BUS_MASTER_QDSS_SNOC_CFG 122 +#define MSM_BUS_MASTER_LAST 130 + +#define MSM_BUS_SYSTEM_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB +#define MSM_BUS_CPSS_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_CPSS_FPB + +#define MSM_BUS_SNOC_MM_INT_0 10000 +#define MSM_BUS_SNOC_MM_INT_1 10001 +#define MSM_BUS_SNOC_MM_INT_2 10002 +#define MSM_BUS_SNOC_MM_INT_BIMC 10003 +#define MSM_BUS_SNOC_INT_0 10004 +#define MSM_BUS_SNOC_INT_1 10005 +#define MSM_BUS_SNOC_INT_BIMC 10006 +#define MSM_BUS_SNOC_BIMC_0_MAS 10007 +#define MSM_BUS_SNOC_BIMC_1_MAS 10008 +#define MSM_BUS_SNOC_QDSS_INT 10009 +#define MSM_BUS_PNOC_SNOC_MAS 10010 +#define MSM_BUS_PNOC_SNOC_SLV 10011 +#define MSM_BUS_PNOC_INT_0 10012 +#define MSM_BUS_PNOC_INT_1 10013 +#define MSM_BUS_PNOC_M_0 10014 +#define MSM_BUS_PNOC_M_1 10015 +#define MSM_BUS_BIMC_SNOC_MAS 10016 +#define MSM_BUS_BIMC_SNOC_SLV 10017 +#define MSM_BUS_PNOC_SLV_0 10018 +#define MSM_BUS_PNOC_SLV_1 10019 +#define MSM_BUS_PNOC_SLV_2 10020 +#define MSM_BUS_PNOC_SLV_3 10021 +#define MSM_BUS_PNOC_SLV_4 10022 +#define MSM_BUS_PNOC_SLV_8 10023 +#define MSM_BUS_PNOC_SLV_9 10024 +#define MSM_BUS_SNOC_BIMC_0_SLV 10025 +#define MSM_BUS_SNOC_BIMC_1_SLV 10026 +#define MSM_BUS_MNOC_BIMC_MAS 10027 +#define MSM_BUS_MNOC_BIMC_SLV 10028 +#define MSM_BUS_BIMC_MNOC_MAS 10029 +#define MSM_BUS_BIMC_MNOC_SLV 10030 +#define MSM_BUS_SNOC_BIMC_MAS 10031 +#define MSM_BUS_SNOC_BIMC_SLV 10032 +#define MSM_BUS_CNOC_SNOC_MAS 10033 +#define MSM_BUS_CNOC_SNOC_SLV 10034 +#define MSM_BUS_SNOC_CNOC_MAS 10035 +#define MSM_BUS_SNOC_CNOC_SLV 10036 +#define MSM_BUS_OVNOC_SNOC_MAS 10037 +#define MSM_BUS_OVNOC_SNOC_SLV 10038 +#define MSM_BUS_SNOC_OVNOC_MAS 10039 +#define MSM_BUS_SNOC_OVNOC_SLV 10040 +#define MSM_BUS_SNOC_PNOC_MAS 10041 +#define MSM_BUS_SNOC_PNOC_SLV 10042 +#define MSM_BUS_BIMC_INT_APPS_EBI 10043 +#define MSM_BUS_BIMC_INT_APPS_SNOC 10044 +#define MSM_BUS_SNOC_BIMC_2_MAS 10045 +#define MSM_BUS_SNOC_BIMC_2_SLV 10046 +#define MSM_BUS_PNOC_SLV_5 10047 +#define MSM_BUS_PNOC_SLV_6 10048 +#define MSM_BUS_PNOC_INT_2 10049 +#define MSM_BUS_PNOC_INT_3 10050 +#define MSM_BUS_PNOC_INT_4 10051 +#define MSM_BUS_PNOC_INT_5 10052 +#define MSM_BUS_PNOC_INT_6 10053 +#define MSM_BUS_PNOC_INT_7 10054 +#define MSM_BUS_BIMC_SNOC_1_MAS 10055 +#define MSM_BUS_BIMC_SNOC_1_SLV 10056 +#define MSM_BUS_PNOC_A1NOC_MAS 10057 +#define MSM_BUS_PNOC_A1NOC_SLV 10058 +#define MSM_BUS_CNOC_A1NOC_MAS 10059 +#define MSM_BUS_A0NOC_SNOC_MAS 10060 +#define MSM_BUS_A0NOC_SNOC_SLV 10061 +#define MSM_BUS_A1NOC_SNOC_SLV 10062 +#define MSM_BUS_A1NOC_SNOC_MAS 10063 +#define MSM_BUS_A2NOC_SNOC_MAS 10064 +#define MSM_BUS_A2NOC_SNOC_SLV 10065 +#define MSM_BUS_PNOC_SLV_7 10066 +#define MSM_BUS_INT_LAST 10067 + +#define MSM_BUS_SLAVE_FIRST 512 +#define MSM_BUS_SLAVE_EBI_CH0 512 +#define MSM_BUS_SLAVE_EBI_CH1 513 +#define MSM_BUS_SLAVE_AMPSS_L2 514 +#define MSM_BUS_APPSS_SLAVE_FAB_MMSS 515 +#define MSM_BUS_APPSS_SLAVE_FAB_SYSTEM 516 +#define MSM_BUS_SYSTEM_SLAVE_FAB_APPS 517 +#define MSM_BUS_SLAVE_SPS 518 +#define MSM_BUS_SLAVE_SYSTEM_IMEM 519 +#define MSM_BUS_SLAVE_AMPSS 520 +#define MSM_BUS_SLAVE_MSS 521 +#define MSM_BUS_SLAVE_LPASS 522 +#define MSM_BUS_SYSTEM_SLAVE_CPSS_FPB 523 +#define MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB 524 +#define MSM_BUS_SYSTEM_SLAVE_MMSS_FPB 525 +#define MSM_BUS_SLAVE_CORESIGHT 526 +#define MSM_BUS_SLAVE_RIVA 527 +#define MSM_BUS_SLAVE_SMI 528 +#define MSM_BUS_MMSS_SLAVE_FAB_APPS 529 +#define MSM_BUS_MMSS_SLAVE_FAB_APPS_1 530 +#define MSM_BUS_SLAVE_MM_IMEM 531 +#define MSM_BUS_SLAVE_CRYPTO 532 +#define MSM_BUS_SLAVE_SPDM 533 +#define MSM_BUS_SLAVE_RPM 534 +#define MSM_BUS_SLAVE_RPM_MSG_RAM 535 +#define MSM_BUS_SLAVE_MPM 536 +#define MSM_BUS_SLAVE_PMIC1_SSBI1_A 537 +#define MSM_BUS_SLAVE_PMIC1_SSBI1_B 538 +#define MSM_BUS_SLAVE_PMIC1_SSBI1_C 539 +#define MSM_BUS_SLAVE_PMIC2_SSBI2_A 540 +#define MSM_BUS_SLAVE_PMIC2_SSBI2_B 541 +#define MSM_BUS_SLAVE_GSBI1_UART 542 +#define MSM_BUS_SLAVE_GSBI2_UART 543 +#define MSM_BUS_SLAVE_GSBI3_UART 544 +#define MSM_BUS_SLAVE_GSBI4_UART 545 +#define MSM_BUS_SLAVE_GSBI5_UART 546 +#define MSM_BUS_SLAVE_GSBI6_UART 547 +#define MSM_BUS_SLAVE_GSBI7_UART 548 +#define MSM_BUS_SLAVE_GSBI8_UART 549 +#define MSM_BUS_SLAVE_GSBI9_UART 550 +#define MSM_BUS_SLAVE_GSBI10_UART 551 +#define MSM_BUS_SLAVE_GSBI11_UART 552 +#define MSM_BUS_SLAVE_GSBI12_UART 553 +#define MSM_BUS_SLAVE_GSBI1_QUP 554 +#define MSM_BUS_SLAVE_GSBI2_QUP 555 +#define MSM_BUS_SLAVE_GSBI3_QUP 556 +#define MSM_BUS_SLAVE_GSBI4_QUP 557 +#define MSM_BUS_SLAVE_GSBI5_QUP 558 +#define MSM_BUS_SLAVE_GSBI6_QUP 559 +#define MSM_BUS_SLAVE_GSBI7_QUP 560 +#define MSM_BUS_SLAVE_GSBI8_QUP 561 +#define MSM_BUS_SLAVE_GSBI9_QUP 562 +#define MSM_BUS_SLAVE_GSBI10_QUP 563 +#define MSM_BUS_SLAVE_GSBI11_QUP 564 +#define MSM_BUS_SLAVE_GSBI12_QUP 565 +#define MSM_BUS_SLAVE_EBI2_NAND 566 +#define MSM_BUS_SLAVE_EBI2_CS0 567 +#define MSM_BUS_SLAVE_EBI2_CS1 568 +#define MSM_BUS_SLAVE_EBI2_CS2 569 +#define MSM_BUS_SLAVE_EBI2_CS3 570 +#define MSM_BUS_SLAVE_EBI2_CS4 571 +#define MSM_BUS_SLAVE_EBI2_CS5 572 +#define MSM_BUS_SLAVE_USB_FS1 573 +#define MSM_BUS_SLAVE_USB_FS2 574 +#define MSM_BUS_SLAVE_TSIF 575 +#define MSM_BUS_SLAVE_MSM_TSSC 576 +#define MSM_BUS_SLAVE_MSM_PDM 577 +#define MSM_BUS_SLAVE_MSM_DIMEM 578 +#define MSM_BUS_SLAVE_MSM_TCSR 579 +#define MSM_BUS_SLAVE_MSM_PRNG 580 +#define MSM_BUS_SLAVE_GSS 581 +#define MSM_BUS_SLAVE_SATA 582 +#define MSM_BUS_SLAVE_USB3 583 +#define MSM_BUS_SLAVE_WCSS 584 +#define MSM_BUS_SLAVE_OCIMEM 585 +#define MSM_BUS_SLAVE_SNOC_OCMEM 586 +#define MSM_BUS_SLAVE_SERVICE_SNOC 587 +#define MSM_BUS_SLAVE_QDSS_STM 588 +#define MSM_BUS_SLAVE_CAMERA_CFG 589 +#define MSM_BUS_SLAVE_DISPLAY_CFG 590 +#define MSM_BUS_SLAVE_OCMEM_CFG 591 +#define MSM_BUS_SLAVE_CPR_CFG 592 +#define MSM_BUS_SLAVE_CPR_XPU_CFG 593 +#define MSM_BUS_SLAVE_MISC_CFG 594 +#define MSM_BUS_SLAVE_MISC_XPU_CFG 595 +#define MSM_BUS_SLAVE_VENUS_CFG 596 +#define MSM_BUS_SLAVE_MISC_VENUS_CFG 597 +#define MSM_BUS_SLAVE_GRAPHICS_3D_CFG 598 +#define MSM_BUS_SLAVE_MMSS_CLK_CFG 599 +#define MSM_BUS_SLAVE_MMSS_CLK_XPU_CFG 600 +#define MSM_BUS_SLAVE_MNOC_MPU_CFG 601 +#define MSM_BUS_SLAVE_ONOC_MPU_CFG 602 +#define MSM_BUS_SLAVE_SERVICE_MNOC 603 +#define MSM_BUS_SLAVE_OCMEM 604 +#define MSM_BUS_SLAVE_SERVICE_ONOC 605 +#define MSM_BUS_SLAVE_SDCC_1 606 +#define MSM_BUS_SLAVE_SDCC_3 607 +#define MSM_BUS_SLAVE_SDCC_2 608 +#define MSM_BUS_SLAVE_SDCC_4 609 +#define MSM_BUS_SLAVE_BAM_DMA 610 +#define MSM_BUS_SLAVE_BLSP_2 611 +#define MSM_BUS_SLAVE_USB_HSIC 612 +#define MSM_BUS_SLAVE_BLSP_1 613 +#define MSM_BUS_SLAVE_USB_HS 614 +#define MSM_BUS_SLAVE_PDM 615 +#define MSM_BUS_SLAVE_PERIPH_APU_CFG 616 +#define MSM_BUS_SLAVE_PNOC_MPU_CFG 617 +#define MSM_BUS_SLAVE_PRNG 618 +#define MSM_BUS_SLAVE_SERVICE_PNOC 619 +#define MSM_BUS_SLAVE_CLK_CTL 620 +#define MSM_BUS_SLAVE_CNOC_MSS 621 +#define MSM_BUS_SLAVE_SECURITY 622 +#define MSM_BUS_SLAVE_TCSR 623 +#define MSM_BUS_SLAVE_TLMM 624 +#define MSM_BUS_SLAVE_CRYPTO_0_CFG 625 +#define MSM_BUS_SLAVE_CRYPTO_1_CFG 626 +#define MSM_BUS_SLAVE_IMEM_CFG 627 +#define MSM_BUS_SLAVE_MESSAGE_RAM 628 +#define MSM_BUS_SLAVE_BIMC_CFG 629 +#define MSM_BUS_SLAVE_BOOT_ROM 630 +#define MSM_BUS_SLAVE_CNOC_MNOC_MMSS_CFG 631 +#define MSM_BUS_SLAVE_PMIC_ARB 632 +#define MSM_BUS_SLAVE_SPDM_WRAPPER 633 +#define MSM_BUS_SLAVE_DEHR_CFG 634 +#define MSM_BUS_SLAVE_QDSS_CFG 635 +#define MSM_BUS_SLAVE_RBCPR_CFG 636 +#define MSM_BUS_SLAVE_RBCPR_QDSS_APU_CFG 637 +#define MSM_BUS_SLAVE_SNOC_MPU_CFG 638 +#define MSM_BUS_SLAVE_CNOC_ONOC_CFG 639 +#define MSM_BUS_SLAVE_CNOC_MNOC_CFG 640 +#define MSM_BUS_SLAVE_PNOC_CFG 641 +#define MSM_BUS_SLAVE_SNOC_CFG 642 +#define MSM_BUS_SLAVE_EBI1_DLL_CFG 643 +#define MSM_BUS_SLAVE_PHY_APU_CFG 644 +#define MSM_BUS_SLAVE_EBI1_PHY_CFG 645 +#define MSM_BUS_SLAVE_SERVICE_CNOC 646 +#define MSM_BUS_SLAVE_IPS_CFG 647 +#define MSM_BUS_SLAVE_QPIC 648 +#define MSM_BUS_SLAVE_DSI_CFG 649 +#define MSM_BUS_SLAVE_UFS_CFG 650 +#define MSM_BUS_SLAVE_RBCPR_CX_CFG 651 +#define MSM_BUS_SLAVE_RBCPR_MX_CFG 652 +#define MSM_BUS_SLAVE_PCIE_CFG 653 +#define MSM_BUS_SLAVE_USB_PHYS_CFG 654 +#define MSM_BUS_SLAVE_VIDEO_CAP_CFG 655 +#define MSM_BUS_SLAVE_AVSYNC_CFG 656 +#define MSM_BUS_SLAVE_CRYPTO_2_CFG 657 +#define MSM_BUS_SLAVE_VPU_CFG 658 +#define MSM_BUS_SLAVE_BCAST_CFG 659 +#define MSM_BUS_SLAVE_KLM_CFG 660 +#define MSM_BUS_SLAVE_GENI_IR_CFG 661 +#define MSM_BUS_SLAVE_OCMEM_GFX 662 +#define MSM_BUS_SLAVE_CATS_128 663 +#define MSM_BUS_SLAVE_OCMEM_64 664 +#define MSM_BUS_SLAVE_PCIE_0 665 +#define MSM_BUS_SLAVE_PCIE_1 666 +#define MSM_BUS_SLAVE_PCIE_0_CFG 667 +#define MSM_BUS_SLAVE_PCIE_1_CFG 668 +#define MSM_BUS_SLAVE_SRVC_MNOC 669 +#define MSM_BUS_SLAVE_USB_HS2 670 +#define MSM_BUS_SLAVE_AUDIO 671 +#define MSM_BUS_SLAVE_TCU 672 +#define MSM_BUS_SLAVE_APPSS 673 +#define MSM_BUS_SLAVE_PCIE_PARF 674 +#define MSM_BUS_SLAVE_USB3_PHY_CFG 675 +#define MSM_BUS_SLAVE_IPA_CFG 676 +#define MSM_BUS_SLAVE_A0NOC_SNOC 677 +#define MSM_BUS_SLAVE_A1NOC_SNOC 678 +#define MSM_BUS_SLAVE_A2NOC_SNOC 679 +#define MSM_BUS_SLAVE_HMSS_L3 680 +#define MSM_BUS_SLAVE_PIMEM_CFG 681 +#define MSM_BUS_SLAVE_DCC_CFG 682 +#define MSM_BUS_SLAVE_QDSS_RBCPR_APU_CFG 683 +#define MSM_BUS_SLAVE_PCIE_2_CFG 684 +#define MSM_BUS_SLAVE_PCIE20_AHB2PHY 685 +#define MSM_BUS_SLAVE_A0NOC_CFG 686 +#define MSM_BUS_SLAVE_A1NOC_CFG 687 +#define MSM_BUS_SLAVE_A2NOC_CFG 688 +#define MSM_BUS_SLAVE_A1NOC_MPU_CFG 689 +#define MSM_BUS_SLAVE_A2NOC_MPU_CFG 690 +#define MSM_BUS_SLAVE_A0NOC_SMMU_CFG 691 +#define MSM_BUS_SLAVE_A1NOC_SMMU_CFG 692 +#define MSM_BUS_SLAVE_A2NOC_SMMU_CFG 693 +#define MSM_BUS_SLAVE_LPASS_SMMU_CFG 694 +#define MSM_BUS_SLAVE_MMAGIC_CFG 695 +#define MSM_BUS_SLAVE_VENUS_THROTTLE_CFG 696 +#define MSM_BUS_SLAVE_SSC_CFG 697 +#define MSM_BUS_SLAVE_DSA_CFG 698 +#define MSM_BUS_SLAVE_DSA_MPU_CFG 699 +#define MSM_BUS_SLAVE_DISPLAY_THROTTLE_CFG 700 +#define MSM_BUS_SLAVE_SMMU_CPP_CFG 701 +#define MSM_BUS_SLAVE_SMMU_JPEG_CFG 702 +#define MSM_BUS_SLAVE_SMMU_MDP_CFG 703 +#define MSM_BUS_SLAVE_SMMU_ROTATOR_CFG 704 +#define MSM_BUS_SLAVE_SMMU_VENUS_CFG 705 +#define MSM_BUS_SLAVE_SMMU_VFE_CFG 706 +#define MSM_BUS_SLAVE_A0NOC_MPU_CFG 707 +#define MSM_BUS_SLAVE_VMEM_CFG 708 +#define MSM_BUS_SLAVE_CAMERA_THROTTLE_CFG 700 +#define MSM_BUS_SLAVE_VMEM 709 +#define MSM_BUS_SLAVE_AHB2PHY 710 +#define MSM_BUS_SLAVE_PIMEM 711 +#define MSM_BUS_SLAVE_SNOC_VMEM 712 +#define MSM_BUS_SLAVE_PCIE_2 713 +#define MSM_BUS_SLAVE_RBCPR_MX 714 +#define MSM_BUS_SLAVE_RBCPR_CX 715 +#define MSM_BUS_SLAVE_PRNG_APU_CFG 716 +#define MSM_BUS_SLAVE_PERIPH_MPU_CFG 717 +#define MSM_BUS_SLAVE_GCNT 718 +#define MSM_BUS_SLAVE_ADSS_CFG 719 +#define MSM_BUS_SLAVE_ADSS_VMIDMT_CFG 720 +#define MSM_BUS_SLAVE_QHSS_APU_CFG 721 +#define MSM_BUS_SLAVE_MDIO 722 +#define MSM_BUS_SLAVE_FEPHY_CFG 723 +#define MSM_BUS_SLAVE_SRIF 724 +#define MSM_BUS_SLAVE_LAST 730 +#define MSM_BUS_SLAVE_DDRC_CFG 731 +#define MSM_BUS_SLAVE_DDRC_APU_CFG 732 +#define MSM_BUS_SLAVE_MPU0_CFG 733 +#define MSM_BUS_SLAVE_MPU1_CFG 734 +#define MSM_BUS_SLAVE_MPU2_CFG 734 +#define MSM_BUS_SLAVE_ESS_VMIDMT_CFG 735 +#define MSM_BUS_SLAVE_ESS_APU_CFG 736 +#define MSM_BUS_SLAVE_USB2_CFG 737 +#define MSM_BUS_SLAVE_BLSP_CFG 738 +#define MSM_BUS_SLAVE_QPIC_CFG 739 +#define MSM_BUS_SLAVE_SDCC_CFG 740 +#define MSM_BUS_SLAVE_WSS0_VMIDMT_CFG 741 +#define MSM_BUS_SLAVE_WSS0_APU_CFG 742 +#define MSM_BUS_SLAVE_WSS1_VMIDMT_CFG 743 +#define MSM_BUS_SLAVE_WSS1_APU_CFG 744 +#define MSM_BUS_SLAVE_SRVC_PCNOC 745 +#define MSM_BUS_SLAVE_SNOC_DDRC 746 +#define MSM_BUS_SLAVE_A7SS 747 +#define MSM_BUS_SLAVE_WSS0_CFG 748 +#define MSM_BUS_SLAVE_WSS1_CFG 749 +#define MSM_BUS_SLAVE_PCIE 750 +#define MSM_BUS_SLAVE_USB3_CFG 751 +#define MSM_BUS_SLAVE_CRYPTO_CFG 752 +#define MSM_BUS_SLAVE_ESS_CFG 753 +#define MSM_BUS_SLAVE_SRVC_SNOC 754 + +#define MSM_BUS_SYSTEM_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB +#define MSM_BUS_CPSS_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_CPSS_FPB + +/* + * ID's used in RPM messages + */ +#define ICBID_MASTER_APPSS_PROC 0 +#define ICBID_MASTER_MSS_PROC 1 +#define ICBID_MASTER_MNOC_BIMC 2 +#define ICBID_MASTER_SNOC_BIMC 3 +#define ICBID_MASTER_SNOC_BIMC_0 ICBID_MASTER_SNOC_BIMC +#define ICBID_MASTER_CNOC_MNOC_MMSS_CFG 4 +#define ICBID_MASTER_CNOC_MNOC_CFG 5 +#define ICBID_MASTER_GFX3D 6 +#define ICBID_MASTER_JPEG 7 +#define ICBID_MASTER_MDP 8 +#define ICBID_MASTER_MDP0 ICBID_MASTER_MDP +#define ICBID_MASTER_MDPS ICBID_MASTER_MDP +#define ICBID_MASTER_VIDEO 9 +#define ICBID_MASTER_VIDEO_P0 ICBID_MASTER_VIDEO +#define ICBID_MASTER_VIDEO_P1 10 +#define ICBID_MASTER_VFE 11 +#define ICBID_MASTER_CNOC_ONOC_CFG 12 +#define ICBID_MASTER_JPEG_OCMEM 13 +#define ICBID_MASTER_MDP_OCMEM 14 +#define ICBID_MASTER_VIDEO_P0_OCMEM 15 +#define ICBID_MASTER_VIDEO_P1_OCMEM 16 +#define ICBID_MASTER_VFE_OCMEM 17 +#define ICBID_MASTER_LPASS_AHB 18 +#define ICBID_MASTER_QDSS_BAM 19 +#define ICBID_MASTER_SNOC_CFG 20 +#define ICBID_MASTER_BIMC_SNOC 21 +#define ICBID_MASTER_CNOC_SNOC 22 +#define ICBID_MASTER_CRYPTO 23 +#define ICBID_MASTER_CRYPTO_CORE0 ICBID_MASTER_CRYPTO +#define ICBID_MASTER_CRYPTO_CORE1 24 +#define ICBID_MASTER_LPASS_PROC 25 +#define ICBID_MASTER_MSS 26 +#define ICBID_MASTER_MSS_NAV 27 +#define ICBID_MASTER_OCMEM_DMA 28 +#define ICBID_MASTER_PNOC_SNOC 29 +#define ICBID_MASTER_WCSS 30 +#define ICBID_MASTER_QDSS_ETR 31 +#define ICBID_MASTER_USB3 32 +#define ICBID_MASTER_USB3_0 ICBID_MASTER_USB3 +#define ICBID_MASTER_SDCC_1 33 +#define ICBID_MASTER_SDCC_3 34 +#define ICBID_MASTER_SDCC_2 35 +#define ICBID_MASTER_SDCC_4 36 +#define ICBID_MASTER_TSIF 37 +#define ICBID_MASTER_BAM_DMA 38 +#define ICBID_MASTER_BLSP_2 39 +#define ICBID_MASTER_USB_HSIC 40 +#define ICBID_MASTER_BLSP_1 41 +#define ICBID_MASTER_USB_HS 42 +#define ICBID_MASTER_USB_HS1 ICBID_MASTER_USB_HS +#define ICBID_MASTER_PNOC_CFG 43 +#define ICBID_MASTER_SNOC_PNOC 44 +#define ICBID_MASTER_RPM_INST 45 +#define ICBID_MASTER_RPM_DATA 46 +#define ICBID_MASTER_RPM_SYS 47 +#define ICBID_MASTER_DEHR 48 +#define ICBID_MASTER_QDSS_DAP 49 +#define ICBID_MASTER_SPDM 50 +#define ICBID_MASTER_TIC 51 +#define ICBID_MASTER_SNOC_CNOC 52 +#define ICBID_MASTER_GFX3D_OCMEM 53 +#define ICBID_MASTER_GFX3D_GMEM ICBID_MASTER_GFX3D_OCMEM +#define ICBID_MASTER_OVIRT_SNOC 54 +#define ICBID_MASTER_SNOC_OVIRT 55 +#define ICBID_MASTER_SNOC_GVIRT ICBID_MASTER_SNOC_OVIRT +#define ICBID_MASTER_ONOC_OVIRT 56 +#define ICBID_MASTER_USB_HS2 57 +#define ICBID_MASTER_QPIC 58 +#define ICBID_MASTER_IPA 59 +#define ICBID_MASTER_DSI 60 +#define ICBID_MASTER_MDP1 61 +#define ICBID_MASTER_MDPE ICBID_MASTER_MDP1 +#define ICBID_MASTER_VPU_PROC 62 +#define ICBID_MASTER_VPU 63 +#define ICBID_MASTER_VPU0 ICBID_MASTER_VPU +#define ICBID_MASTER_CRYPTO_CORE2 64 +#define ICBID_MASTER_PCIE_0 65 +#define ICBID_MASTER_PCIE_1 66 +#define ICBID_MASTER_SATA 67 +#define ICBID_MASTER_UFS 68 +#define ICBID_MASTER_USB3_1 69 +#define ICBID_MASTER_VIDEO_OCMEM 70 +#define ICBID_MASTER_VPU1 71 +#define ICBID_MASTER_VCAP 72 +#define ICBID_MASTER_EMAC 73 +#define ICBID_MASTER_BCAST 74 +#define ICBID_MASTER_MMSS_PROC 75 +#define ICBID_MASTER_SNOC_BIMC_1 76 +#define ICBID_MASTER_SNOC_PCNOC 77 +#define ICBID_MASTER_AUDIO 78 +#define ICBID_MASTER_MM_INT_0 79 +#define ICBID_MASTER_MM_INT_1 80 +#define ICBID_MASTER_MM_INT_2 81 +#define ICBID_MASTER_MM_INT_BIMC 82 +#define ICBID_MASTER_MSS_INT 83 +#define ICBID_MASTER_PCNOC_CFG 84 +#define ICBID_MASTER_PCNOC_INT_0 85 +#define ICBID_MASTER_PCNOC_INT_1 86 +#define ICBID_MASTER_PCNOC_M_0 87 +#define ICBID_MASTER_PCNOC_M_1 88 +#define ICBID_MASTER_PCNOC_S_0 89 +#define ICBID_MASTER_PCNOC_S_1 90 +#define ICBID_MASTER_PCNOC_S_2 91 +#define ICBID_MASTER_PCNOC_S_3 92 +#define ICBID_MASTER_PCNOC_S_4 93 +#define ICBID_MASTER_PCNOC_S_6 94 +#define ICBID_MASTER_PCNOC_S_7 95 +#define ICBID_MASTER_PCNOC_S_8 96 +#define ICBID_MASTER_PCNOC_S_9 97 +#define ICBID_MASTER_QDSS_INT 98 +#define ICBID_MASTER_SNOC_INT_0 99 +#define ICBID_MASTER_SNOC_INT_1 100 +#define ICBID_MASTER_SNOC_INT_BIMC 101 +#define ICBID_MASTER_TCU_0 102 +#define ICBID_MASTER_TCU_1 103 +#define ICBID_MASTER_BIMC_INT_0 104 +#define ICBID_MASTER_BIMC_INT_1 105 +#define ICBID_MASTER_CAMERA 106 +#define ICBID_MASTER_RICA 107 +#define ICBID_MASTER_PCNOC_S_5 129 +#define ICBID_MASTER_PCNOC_INT_2 124 +#define ICBID_MASTER_PCNOC_INT_3 125 +#define ICBID_MASTER_PCNOC_INT_4 126 +#define ICBID_MASTER_PCNOC_INT_5 127 +#define ICBID_MASTER_PCNOC_INT_6 128 +#define ICBID_MASTER_PCIE_2 119 +#define ICBID_MASTER_MASTER_CNOC_A1NOC 116 +#define ICBID_MASTER_A0NOC_SNOC 110 +#define ICBID_MASTER_A1NOC_SNOC 111 +#define ICBID_MASTER_A2NOC_SNOC 112 +#define ICBID_MASTER_PNOC_A1NOC 117 +#define ICBID_MASTER_ROTATOR 120 +#define ICBID_MASTER_SNOC_VMEM 114 +#define ICBID_MASTER_VENUS_VMEM 121 +#define ICBID_MASTER_HMSS 118 +#define ICBID_MASTER_BIMC_SNOC_1 109 +#define ICBID_MASTER_CNOC_A1NOC 116 +#define ICBID_MASTER_CPP 115 +#define ICBID_MASTER_BLSP_BAM 130 +#define ICBID_MASTER_USB2_BAM 131 +#define ICBID_MASTER_ADSS_DMA0 132 +#define ICBID_MASTER_ADSS_DMA1 133 +#define ICBID_MASTER_ADSS_DMA2 134 +#define ICBID_MASTER_ADSS_DMA3 135 +#define ICBID_MASTER_QPIC_BAM 136 +#define ICBID_MASTER_SDCC_BAM 137 +#define ICBID_MASTER_DDRC_SNOC 138 +#define ICBID_MASTER_WSS_0 139 +#define ICBID_MASTER_WSS_1 140 +#define ICBID_MASTER_ESS 141 +#define ICBID_MASTER_PCIE 142 +#define ICBID_MASTER_QDSS_BAMNDP 143 +#define ICBID_MASTER_QDSS_SNOC_CFG 144 + +#define ICBID_SLAVE_EBI1 0 +#define ICBID_SLAVE_APPSS_L2 1 +#define ICBID_SLAVE_BIMC_SNOC 2 +#define ICBID_SLAVE_CAMERA_CFG 3 +#define ICBID_SLAVE_DISPLAY_CFG 4 +#define ICBID_SLAVE_OCMEM_CFG 5 +#define ICBID_SLAVE_CPR_CFG 6 +#define ICBID_SLAVE_CPR_XPU_CFG 7 +#define ICBID_SLAVE_MISC_CFG 8 +#define ICBID_SLAVE_MISC_XPU_CFG 9 +#define ICBID_SLAVE_VENUS_CFG 10 +#define ICBID_SLAVE_GFX3D_CFG 11 +#define ICBID_SLAVE_MMSS_CLK_CFG 12 +#define ICBID_SLAVE_MMSS_CLK_XPU_CFG 13 +#define ICBID_SLAVE_MNOC_MPU_CFG 14 +#define ICBID_SLAVE_ONOC_MPU_CFG 15 +#define ICBID_SLAVE_MNOC_BIMC 16 +#define ICBID_SLAVE_SERVICE_MNOC 17 +#define ICBID_SLAVE_OCMEM 18 +#define ICBID_SLAVE_GMEM ICBID_SLAVE_OCMEM +#define ICBID_SLAVE_SERVICE_ONOC 19 +#define ICBID_SLAVE_APPSS 20 +#define ICBID_SLAVE_LPASS 21 +#define ICBID_SLAVE_USB3 22 +#define ICBID_SLAVE_USB3_0 ICBID_SLAVE_USB3 +#define ICBID_SLAVE_WCSS 23 +#define ICBID_SLAVE_SNOC_BIMC 24 +#define ICBID_SLAVE_SNOC_BIMC_0 ICBID_SLAVE_SNOC_BIMC +#define ICBID_SLAVE_SNOC_CNOC 25 +#define ICBID_SLAVE_IMEM 26 +#define ICBID_SLAVE_OCIMEM ICBID_SLAVE_IMEM +#define ICBID_SLAVE_SNOC_OVIRT 27 +#define ICBID_SLAVE_SNOC_GVIRT ICBID_SLAVE_SNOC_OVIRT +#define ICBID_SLAVE_SNOC_PNOC 28 +#define ICBID_SLAVE_SNOC_PCNOC ICBID_SLAVE_SNOC_PNOC +#define ICBID_SLAVE_SERVICE_SNOC 29 +#define ICBID_SLAVE_QDSS_STM 30 +#define ICBID_SLAVE_SDCC_1 31 +#define ICBID_SLAVE_SDCC_3 32 +#define ICBID_SLAVE_SDCC_2 33 +#define ICBID_SLAVE_SDCC_4 34 +#define ICBID_SLAVE_TSIF 35 +#define ICBID_SLAVE_BAM_DMA 36 +#define ICBID_SLAVE_BLSP_2 37 +#define ICBID_SLAVE_USB_HSIC 38 +#define ICBID_SLAVE_BLSP_1 39 +#define ICBID_SLAVE_USB_HS 40 +#define ICBID_SLAVE_USB_HS1 ICBID_SLAVE_USB_HS +#define ICBID_SLAVE_PDM 41 +#define ICBID_SLAVE_PERIPH_APU_CFG 42 +#define ICBID_SLAVE_PNOC_MPU_CFG 43 +#define ICBID_SLAVE_PRNG 44 +#define ICBID_SLAVE_PNOC_SNOC 45 +#define ICBID_SLAVE_PCNOC_SNOC ICBID_SLAVE_PNOC_SNOC +#define ICBID_SLAVE_SERVICE_PNOC 46 +#define ICBID_SLAVE_CLK_CTL 47 +#define ICBID_SLAVE_CNOC_MSS 48 +#define ICBID_SLAVE_PCNOC_MSS ICBID_SLAVE_CNOC_MSS +#define ICBID_SLAVE_SECURITY 49 +#define ICBID_SLAVE_TCSR 50 +#define ICBID_SLAVE_TLMM 51 +#define ICBID_SLAVE_CRYPTO_0_CFG 52 +#define ICBID_SLAVE_CRYPTO_1_CFG 53 +#define ICBID_SLAVE_IMEM_CFG 54 +#define ICBID_SLAVE_MESSAGE_RAM 55 +#define ICBID_SLAVE_BIMC_CFG 56 +#define ICBID_SLAVE_BOOT_ROM 57 +#define ICBID_SLAVE_CNOC_MNOC_MMSS_CFG 58 +#define ICBID_SLAVE_PMIC_ARB 59 +#define ICBID_SLAVE_SPDM_WRAPPER 60 +#define ICBID_SLAVE_DEHR_CFG 61 +#define ICBID_SLAVE_MPM 62 +#define ICBID_SLAVE_QDSS_CFG 63 +#define ICBID_SLAVE_RBCPR_CFG 64 +#define ICBID_SLAVE_RBCPR_CX_CFG ICBID_SLAVE_RBCPR_CFG +#define ICBID_SLAVE_RBCPR_QDSS_APU_CFG 65 +#define ICBID_SLAVE_CNOC_MNOC_CFG 66 +#define ICBID_SLAVE_SNOC_MPU_CFG 67 +#define ICBID_SLAVE_CNOC_ONOC_CFG 68 +#define ICBID_SLAVE_PNOC_CFG 69 +#define ICBID_SLAVE_SNOC_CFG 70 +#define ICBID_SLAVE_EBI1_DLL_CFG 71 +#define ICBID_SLAVE_PHY_APU_CFG 72 +#define ICBID_SLAVE_EBI1_PHY_CFG 73 +#define ICBID_SLAVE_RPM 74 +#define ICBID_SLAVE_CNOC_SNOC 75 +#define ICBID_SLAVE_SERVICE_CNOC 76 +#define ICBID_SLAVE_OVIRT_SNOC 77 +#define ICBID_SLAVE_OVIRT_OCMEM 78 +#define ICBID_SLAVE_USB_HS2 79 +#define ICBID_SLAVE_QPIC 80 +#define ICBID_SLAVE_IPS_CFG 81 +#define ICBID_SLAVE_DSI_CFG 82 +#define ICBID_SLAVE_USB3_1 83 +#define ICBID_SLAVE_PCIE_0 84 +#define ICBID_SLAVE_PCIE_1 85 +#define ICBID_SLAVE_PSS_SMMU_CFG 86 +#define ICBID_SLAVE_CRYPTO_2_CFG 87 +#define ICBID_SLAVE_PCIE_0_CFG 88 +#define ICBID_SLAVE_PCIE_1_CFG 89 +#define ICBID_SLAVE_SATA_CFG 90 +#define ICBID_SLAVE_SPSS_GENI_IR 91 +#define ICBID_SLAVE_UFS_CFG 92 +#define ICBID_SLAVE_AVSYNC_CFG 93 +#define ICBID_SLAVE_VPU_CFG 94 +#define ICBID_SLAVE_USB_PHY_CFG 95 +#define ICBID_SLAVE_RBCPR_MX_CFG 96 +#define ICBID_SLAVE_PCIE_PARF 97 +#define ICBID_SLAVE_VCAP_CFG 98 +#define ICBID_SLAVE_EMAC_CFG 99 +#define ICBID_SLAVE_BCAST_CFG 100 +#define ICBID_SLAVE_KLM_CFG 101 +#define ICBID_SLAVE_DISPLAY_PWM 102 +#define ICBID_SLAVE_GENI 103 +#define ICBID_SLAVE_SNOC_BIMC_1 104 +#define ICBID_SLAVE_AUDIO 105 +#define ICBID_SLAVE_CATS_0 106 +#define ICBID_SLAVE_CATS_1 107 +#define ICBID_SLAVE_MM_INT_0 108 +#define ICBID_SLAVE_MM_INT_1 109 +#define ICBID_SLAVE_MM_INT_2 110 +#define ICBID_SLAVE_MM_INT_BIMC 111 +#define ICBID_SLAVE_MMU_MODEM_XPU_CFG 112 +#define ICBID_SLAVE_MSS_INT 113 +#define ICBID_SLAVE_PCNOC_INT_0 114 +#define ICBID_SLAVE_PCNOC_INT_1 115 +#define ICBID_SLAVE_PCNOC_M_0 116 +#define ICBID_SLAVE_PCNOC_M_1 117 +#define ICBID_SLAVE_PCNOC_S_0 118 +#define ICBID_SLAVE_PCNOC_S_1 119 +#define ICBID_SLAVE_PCNOC_S_2 120 +#define ICBID_SLAVE_PCNOC_S_3 121 +#define ICBID_SLAVE_PCNOC_S_4 122 +#define ICBID_SLAVE_PCNOC_S_6 123 +#define ICBID_SLAVE_PCNOC_S_7 124 +#define ICBID_SLAVE_PCNOC_S_8 125 +#define ICBID_SLAVE_PCNOC_S_9 126 +#define ICBID_SLAVE_PRNG_XPU_CFG 127 +#define ICBID_SLAVE_QDSS_INT 128 +#define ICBID_SLAVE_RPM_XPU_CFG 129 +#define ICBID_SLAVE_SNOC_INT_0 130 +#define ICBID_SLAVE_SNOC_INT_1 131 +#define ICBID_SLAVE_SNOC_INT_BIMC 132 +#define ICBID_SLAVE_TCU 133 +#define ICBID_SLAVE_BIMC_INT_0 134 +#define ICBID_SLAVE_BIMC_INT_1 135 +#define ICBID_SLAVE_RICA_CFG 136 +#define ICBID_SLAVE_PCNOC_S_5 189 +#define ICBID_SLAVE_PCNOC_S_7 124 +#define ICBID_SLAVE_PCNOC_INT_2 184 +#define ICBID_SLAVE_PCNOC_INT_3 185 +#define ICBID_SLAVE_PCNOC_INT_4 186 +#define ICBID_SLAVE_PCNOC_INT_5 187 +#define ICBID_SLAVE_PCNOC_INT_6 188 +#define ICBID_SLAVE_USB3_PHY_CFG 182 +#define ICBID_SLAVE_IPA_CFG 183 + +#define ICBID_SLAVE_A0NOC_SNOC 141 +#define ICBID_SLAVE_A1NOC_SNOC 142 +#define ICBID_SLAVE_A2NOC_SNOC 143 +#define ICBID_SLAVE_BIMC_SNOC_1 138 +#define ICBID_SLAVE_PIMEM 167 +#define ICBID_SLAVE_PIMEM_CFG 168 +#define ICBID_SLAVE_DCC_CFG 155 +#define ICBID_SLAVE_QDSS_RBCPR_APU_CFG 168 +#define ICBID_SLAVE_A0NOC_CFG 144 +#define ICBID_SLAVE_PCIE_2_CFG 165 +#define ICBID_SLAVE_PCIE20_AHB2PHY 163 +#define ICBID_SLAVE_PCIE_2 164 +#define ICBID_SLAVE_A1NOC_CFG 147 +#define ICBID_SLAVE_A1NOC_MPU_CFG 148 +#define ICBID_SLAVE_A1NOC_SMMU_CFG 149 +#define ICBID_SLAVE_A2NOC_CFG 150 +#define ICBID_SLAVE_A2NOC_MPU_CFG 151 +#define ICBID_SLAVE_A2NOC_SMMU_CFG 152 +#define ICBID_SLAVE_AHB2PHY 153 +#define ICBID_SLAVE_HMSS_L3 161 +#define ICBID_SLAVE_LPASS_SMMU_CFG 161 +#define ICBID_SLAVE_MMAGIC_CFG 162 +#define ICBID_SLAVE_SSC_CFG 177 +#define ICBID_SLAVE_VENUS_THROTTLE_CFG 178 +#define ICBID_SLAVE_DISPLAY_THROTTLE_CFG 156 +#define ICBID_SLAVE_CAMERA_THROTTLE_CFG 154 +#define ICBID_SLAVE_DSA_CFG 157 +#define ICBID_SLAVE_DSA_MPU_CFG 158 +#define ICBID_SLAVE_SMMU_CPP_CFG 171 +#define ICBID_SLAVE_SMMU_JPEG_CFG 172 +#define ICBID_SLAVE_SMMU_MDP_CFG 173 +#define ICBID_SLAVE_SMMU_ROTATOR_CFG 174 +#define ICBID_SLAVE_SMMU_VENUS_CFG 175 +#define ICBID_SLAVE_SMMU_VFE_CFG 176 +#define ICBID_SLAVE_A0NOC_MPU_CFG 145 +#define ICBID_SLAVE_A0NOC_SMMU_CFG 146 +#define ICBID_SLAVE_VMEM_CFG 180 +#define ICBID_SLAVE_VMEM 179 +#define ICBID_SLAVE_PNOC_A1NOC 139 +#define ICBID_SLAVE_SNOC_VMEM 140 +#define ICBID_SLAVE_RBCPR_MX 170 +#define ICBID_SLAVE_RBCPR_CX 169 +#define ICBID_SLAVE_PRNG_APU_CFG 190 +#define ICBID_SLAVE_PERIPH_MPU_CFG 191 +#define ICBID_SLAVE_GCNT 192 +#define ICBID_SLAVE_ADSS_CFG 193 +#define ICBID_SLAVE_ADSS_APU 194 +#define ICBID_SLAVE_ADSS_VMIDMT_CFG 195 +#define ICBID_SLAVE_QHSS_APU_CFG 196 +#define ICBID_SLAVE_MDIO 197 +#define ICBID_SLAVE_FEPHY_CFG 198 +#define ICBID_SLAVE_SRIF 199 +#define ICBID_SLAVE_DDRC_CFG 200 +#define ICBID_SLAVE_DDRC_APU_CFG 201 +#define ICBID_SLAVE_DDRC_MPU0_CFG 202 +#define ICBID_SLAVE_DDRC_MPU1_CFG 203 +#define ICBID_SLAVE_DDRC_MPU2_CFG 210 +#define ICBID_SLAVE_ESS_VMIDMT_CFG 211 +#define ICBID_SLAVE_ESS_APU_CFG 212 +#define ICBID_SLAVE_USB2_CFG 213 +#define ICBID_SLAVE_BLSP_CFG 214 +#define ICBID_SLAVE_QPIC_CFG 215 +#define ICBID_SLAVE_SDCC_CFG 216 +#define ICBID_SLAVE_WSS0_VMIDMT_CFG 217 +#define ICBID_SLAVE_WSS0_APU_CFG 218 +#define ICBID_SLAVE_WSS1_VMIDMT_CFG 219 +#define ICBID_SLAVE_WSS1_APU_CFG 220 +#define ICBID_SLAVE_SRVC_PCNOC 221 +#define ICBID_SLAVE_SNOC_DDRC 222 +#define ICBID_SLAVE_A7SS 223 +#define ICBID_SLAVE_WSS0_CFG 224 +#define ICBID_SLAVE_WSS1_CFG 225 +#define ICBID_SLAVE_PCIE 226 +#define ICBID_SLAVE_USB3_CFG 227 +#define ICBID_SLAVE_CRYPTO_CFG 228 +#define ICBID_SLAVE_ESS_CFG 229 +#define ICBID_SLAVE_SRVC_SNOC 230 +#endif diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index ed46bca649..a13a17b3cf 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -179,6 +179,20 @@ define Device/compex_wpj428 endef TARGET_DEVICES += compex_wpj428 +define Device/compex_wpj419 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_VENDOR := Compex + DEVICE_MODEL := WPJ419 + DEVICE_DTS := qcom-ipq4019-wpj419 + DEVICE_DTS_CONFIG := config@12 + KERNEL_INSTALL := 1 + BLOCKSIZE := 128k + PAGESIZE := 2048 + FILESYSTEMS := squashfs +endef +TARGET_DEVICES += compex_wpj419 + define Device/engenius_eap1300 $(call Device/FitImage) DEVICE_VENDOR := EnGenius diff --git a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch index 28ab181e77..711b662690 100644 --- a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch @@ -12,7 +12,7 @@ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b5bd3de87..5a52a0b19 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -785,11 +785,35 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -785,11 +785,36 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -42,6 +42,7 @@ index b5bd3de87..5a52a0b19 100644 + qcom-ipq4019-qxwlan-e2600ac-c1.dtb \ + qcom-ipq4019-qxwlan-e2600ac-c2.dtb \ + qcom-ipq4019-unielec-u4019-32m.dtb \ ++ qcom-ipq4019-wpj419.dtb \ + qcom-ipq4028-wpj428.dtb \ + qcom-ipq4029-gl-b1300.dtb \ + qcom-ipq4029-mr33.dtb \
This device contains 2 flash devices. One NOR (32M) and one NAND (128M). U-boot and caldata are on the NOR, the firmware on the NAND. SoC: IPQ4019 CPU: 4x 710MHz ARMv7 RAM: 256MB FLASH: NOR:32MB NAND:128MB ETH: 2x GMAC Gigabit POE: 802.3 af/at POE, IEEE802.3af/IEEE802.3at(48-56V) WIFI: 1x 2.4Ghz Atheros qca4019 2x2 MU-MIMO 1x 5.0Ghz Atheros qca4019 2x2 MU-MIMO USB: 1x 3.0 PCI: 1x Mini PCIe SIM: 1x Slot SD: 1x MicroSD slot BTN: Reset LED: - Power - Ethernet UART: 1x Serial Port 4 Pin Connector (UART) 1x Serial Port 6 Pin Connector (High Speed UART) POWER: 12V 2A Installation ------------ Initial flashing can only be done via u-boot using the following commands: tftpboot openwrt-ipq40xx-generic-compex_wpj419-nand-squashfs-nand-factory.ubi nand erase.chip; nand write ${fileaddr} 0x0 ${filesize} set fsbootargs ubi.mtd=rootfs root=/dev/ubiblock0_1 rootfstype=squashfs saveenv res Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> --- .../ipq40xx/base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 2 + target/linux/ipq40xx/config-4.19 | 3 + .../arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 1142 +++++++++++++++++ .../arch/arm/boot/dts/qcom-ipq4019-wpj419.dts | 371 ++++++ .../include/dt-bindings/msm/msm-bus-ids.h | 869 +++++++++++++ target/linux/ipq40xx/image/Makefile | 14 + .../901-arm-boot-add-dts-files.patch | 3 +- 8 files changed, 2404 insertions(+), 1 deletion(-) create mode 100644 target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi create mode 100644 target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts create mode 100644 target/linux/ipq40xx/files-4.19/include/dt-bindings/msm/msm-bus-ids.h