Message ID | 20190727195940.14010-1-contact@artur-rojek.eu |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | [v2,1/3] dt-bindings: iio/adc: Add a compatible string for JZ4770 SoC ADC | expand |
On Sat, 27 Jul 2019 21:59:38 +0200 Artur Rojek <contact@artur-rojek.eu> wrote: > Add a compatible string for the ADC controller present on > Ingenic JZ4770 SoC. > > Signed-off-by: Artur Rojek <contact@artur-rojek.eu> > Reviewed-by: Rob Herring <robh@kernel.org> Hi Artur, I'll have to hold this series for a few weeks as the fix for the clock rate divider isn't in my upstream for the togreg branch yet (as I haven't sent a pull request since the merge window). Give me a poke if I seem to have forgotten these in a few weeks time. Thanks, Jonathan > --- > > Changes: > > v2: no change > > Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt > index f01159f20d87..cd9048cf9dcf 100644 > --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt > +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt > @@ -5,6 +5,7 @@ Required properties: > - compatible: Should be one of: > * ingenic,jz4725b-adc > * ingenic,jz4740-adc > + * ingenic,jz4770-adc > - reg: ADC controller registers location and length. > - clocks: phandle to the SoC's ADC clock. > - clock-names: Must be set to "adc".
Hi Jonathan, Just reminding you of this patch set. Artur On 2019-07-28 10:45, Jonathan Cameron wrote: > On Sat, 27 Jul 2019 21:59:38 +0200 > Artur Rojek <contact@artur-rojek.eu> wrote: > >> Add a compatible string for the ADC controller present on >> Ingenic JZ4770 SoC. >> >> Signed-off-by: Artur Rojek <contact@artur-rojek.eu> >> Reviewed-by: Rob Herring <robh@kernel.org> > > Hi Artur, > > I'll have to hold this series for a few weeks as the fix for the > clock rate divider isn't in my upstream for the togreg branch yet > (as I haven't sent a pull request since the merge window). > > Give me a poke if I seem to have forgotten these in a few weeks > time. > > Thanks, > > Jonathan > >> --- >> >> Changes: >> >> v2: no change >> >> Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt >> b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt >> index f01159f20d87..cd9048cf9dcf 100644 >> --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt >> +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt >> @@ -5,6 +5,7 @@ Required properties: >> - compatible: Should be one of: >> * ingenic,jz4725b-adc >> * ingenic,jz4740-adc >> + * ingenic,jz4770-adc >> - reg: ADC controller registers location and length. >> - clocks: phandle to the SoC's ADC clock. >> - clock-names: Must be set to "adc".
On Tue, 03 Sep 2019 21:09:24 +0200 Artur Rojek <contact@artur-rojek.eu> wrote: > Hi Jonathan, > > Just reminding you of this patch set. > > Artur Hi Artur, Thanks for the reminder. As you'd no doubt concluded, I'd dropped it down the back of the sofa. Unfortunately it's now just missed my last pull for 5.4 (probably) so I've queued it up for the 5.5 cycle. Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > > On 2019-07-28 10:45, Jonathan Cameron wrote: > > On Sat, 27 Jul 2019 21:59:38 +0200 > > Artur Rojek <contact@artur-rojek.eu> wrote: > > > >> Add a compatible string for the ADC controller present on > >> Ingenic JZ4770 SoC. > >> > >> Signed-off-by: Artur Rojek <contact@artur-rojek.eu> > >> Reviewed-by: Rob Herring <robh@kernel.org> > > > > Hi Artur, > > > > I'll have to hold this series for a few weeks as the fix for the > > clock rate divider isn't in my upstream for the togreg branch yet > > (as I haven't sent a pull request since the merge window). > > > > Give me a poke if I seem to have forgotten these in a few weeks > > time. > > > > Thanks, > > > > Jonathan > > > >> --- > >> > >> Changes: > >> > >> v2: no change > >> > >> Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt | 1 + > >> 1 file changed, 1 insertion(+) > >> > >> diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt > >> b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt > >> index f01159f20d87..cd9048cf9dcf 100644 > >> --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt > >> +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt > >> @@ -5,6 +5,7 @@ Required properties: > >> - compatible: Should be one of: > >> * ingenic,jz4725b-adc > >> * ingenic,jz4740-adc > >> + * ingenic,jz4770-adc > >> - reg: ADC controller registers location and length. > >> - clocks: phandle to the SoC's ADC clock. > >> - clock-names: Must be set to "adc".
On Sat, 27 Jul 2019 21:59:40 +0200 Artur Rojek <contact@artur-rojek.eu> wrote: > Add support for the ADC hardware present on Ingenic JZ4770 SoC. > > Signed-off-by: Artur Rojek <contact@artur-rojek.eu> > Tested-by: Paul Cercueil <paul@crapouillou.net> Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > > Changes: > > v2: - move the IIO_CHAN_INFO_RAW block into a utility function, > - unconditionally lock aux_lock for reduced complexity > > drivers/iio/adc/ingenic-adc.c | 149 +++++++++++++++++++++++++++++----- > 1 file changed, 127 insertions(+), 22 deletions(-) > > diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c > index e234970b7150..7a53c2f8d438 100644 > --- a/drivers/iio/adc/ingenic-adc.c > +++ b/drivers/iio/adc/ingenic-adc.c > @@ -25,9 +25,13 @@ > #define JZ_ADC_REG_ADSDAT 0x20 > #define JZ_ADC_REG_ADCLK 0x28 > > +#define JZ_ADC_REG_ENABLE_PD BIT(7) > +#define JZ_ADC_REG_CFG_AUX_MD (BIT(0) | BIT(1)) > #define JZ_ADC_REG_CFG_BAT_MD BIT(4) > #define JZ_ADC_REG_ADCLK_CLKDIV_LSB 0 > -#define JZ_ADC_REG_ADCLK_CLKDIV10US_LSB 16 > +#define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB 16 > +#define JZ4770_ADC_REG_ADCLK_CLKDIV10US_LSB 8 > +#define JZ4770_ADC_REG_ADCLK_CLKDIVMS_LSB 16 > > #define JZ_ADC_AUX_VREF 3300 > #define JZ_ADC_AUX_VREF_BITS 12 > @@ -37,6 +41,8 @@ > #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS 10 > #define JZ4740_ADC_BATTERY_HIGH_VREF (7500 * 0.986) > #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS 12 > +#define JZ4770_ADC_BATTERY_VREF 6600 > +#define JZ4770_ADC_BATTERY_VREF_BITS 12 > > struct ingenic_adc; > > @@ -47,6 +53,8 @@ struct ingenic_adc_soc_data { > size_t battery_raw_avail_size; > const int *battery_scale_avail; > size_t battery_scale_avail_size; > + unsigned int battery_vref_mode: 1; > + unsigned int has_aux2: 1; > int (*init_clk_div)(struct device *dev, struct ingenic_adc *adc); > }; > > @@ -54,6 +62,7 @@ struct ingenic_adc { > void __iomem *base; > struct clk *clk; > struct mutex lock; > + struct mutex aux_lock; > const struct ingenic_adc_soc_data *soc_data; > bool low_vref_mode; > }; > @@ -120,6 +129,8 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev, > case IIO_CHAN_INFO_SCALE: > switch (chan->channel) { > case INGENIC_ADC_BATTERY: > + if (!adc->soc_data->battery_vref_mode) > + return -EINVAL; > if (val > JZ_ADC_BATTERY_LOW_VREF) { > ingenic_adc_set_config(adc, > JZ_ADC_REG_CFG_BAT_MD, > @@ -158,6 +169,14 @@ static const int jz4740_adc_battery_scale_avail[] = { > JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS, > }; > > +static const int jz4770_adc_battery_raw_avail[] = { > + 0, 1, (1 << JZ4770_ADC_BATTERY_VREF_BITS) - 1, > +}; > + > +static const int jz4770_adc_battery_scale_avail[] = { > + JZ4770_ADC_BATTERY_VREF, JZ4770_ADC_BATTERY_VREF_BITS, > +}; > + > static int jz4725b_adc_init_clk_div(struct device *dev, struct ingenic_adc *adc) > { > struct clk *parent_clk; > @@ -187,7 +206,45 @@ static int jz4725b_adc_init_clk_div(struct device *dev, struct ingenic_adc *adc) > /* We also need a divider that produces a 10us clock. */ > div_10us = DIV_ROUND_UP(rate, 100000); > > - writel(((div_10us - 1) << JZ_ADC_REG_ADCLK_CLKDIV10US_LSB) | > + writel(((div_10us - 1) << JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB) | > + (div_main - 1) << JZ_ADC_REG_ADCLK_CLKDIV_LSB, > + adc->base + JZ_ADC_REG_ADCLK); > + > + return 0; > +} > + > +static int jz4770_adc_init_clk_div(struct device *dev, struct ingenic_adc *adc) > +{ > + struct clk *parent_clk; > + unsigned long parent_rate, rate; > + unsigned int div_main, div_ms, div_10us; > + > + parent_clk = clk_get_parent(adc->clk); > + if (!parent_clk) { > + dev_err(dev, "ADC clock has no parent\n"); > + return -ENODEV; > + } > + parent_rate = clk_get_rate(parent_clk); > + > + /* > + * The JZ4770 ADC works at 20 kHz to 200 kHz. > + * We pick the highest rate possible. > + */ > + div_main = DIV_ROUND_UP(parent_rate, 200000); > + div_main = clamp(div_main, 1u, 256u); > + rate = parent_rate / div_main; > + if (rate < 20000 || rate > 200000) { > + dev_err(dev, "No valid divider for ADC main clock\n"); > + return -EINVAL; > + } > + > + /* We also need a divider that produces a 10us clock. */ > + div_10us = DIV_ROUND_UP(rate, 10000); > + /* And another, which produces a 1ms clock. */ > + div_ms = DIV_ROUND_UP(rate, 1000); > + > + writel(((div_ms - 1) << JZ4770_ADC_REG_ADCLK_CLKDIVMS_LSB) | > + ((div_10us - 1) << JZ4770_ADC_REG_ADCLK_CLKDIV10US_LSB) | > (div_main - 1) << JZ_ADC_REG_ADCLK_CLKDIV_LSB, > adc->base + JZ_ADC_REG_ADCLK); > > @@ -201,6 +258,8 @@ static const struct ingenic_adc_soc_data jz4725b_adc_soc_data = { > .battery_raw_avail_size = ARRAY_SIZE(jz4725b_adc_battery_raw_avail), > .battery_scale_avail = jz4725b_adc_battery_scale_avail, > .battery_scale_avail_size = ARRAY_SIZE(jz4725b_adc_battery_scale_avail), > + .battery_vref_mode = true, > + .has_aux2 = false, > .init_clk_div = jz4725b_adc_init_clk_div, > }; > > @@ -211,9 +270,23 @@ static const struct ingenic_adc_soc_data jz4740_adc_soc_data = { > .battery_raw_avail_size = ARRAY_SIZE(jz4740_adc_battery_raw_avail), > .battery_scale_avail = jz4740_adc_battery_scale_avail, > .battery_scale_avail_size = ARRAY_SIZE(jz4740_adc_battery_scale_avail), > + .battery_vref_mode = true, > + .has_aux2 = false, > .init_clk_div = NULL, /* no ADCLK register on JZ4740 */ > }; > > +static const struct ingenic_adc_soc_data jz4770_adc_soc_data = { > + .battery_high_vref = JZ4770_ADC_BATTERY_VREF, > + .battery_high_vref_bits = JZ4770_ADC_BATTERY_VREF_BITS, > + .battery_raw_avail = jz4770_adc_battery_raw_avail, > + .battery_raw_avail_size = ARRAY_SIZE(jz4770_adc_battery_raw_avail), > + .battery_scale_avail = jz4770_adc_battery_scale_avail, > + .battery_scale_avail_size = ARRAY_SIZE(jz4770_adc_battery_scale_avail), > + .battery_vref_mode = false, > + .has_aux2 = true, > + .init_clk_div = jz4770_adc_init_clk_div, > +}; > + > static int ingenic_adc_read_avail(struct iio_dev *iio_dev, > struct iio_chan_spec const *chan, > const int **vals, > @@ -239,6 +312,42 @@ static int ingenic_adc_read_avail(struct iio_dev *iio_dev, > }; > } > > +static int ingenic_adc_read_chan_info_raw(struct ingenic_adc *adc, > + struct iio_chan_spec const *chan, > + int *val) > +{ > + int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY); > + > + /* We cannot sample AUX/AUX2 in parallel. */ > + mutex_lock(&adc->aux_lock); > + if (adc->soc_data->has_aux2 && engine == 0) { > + bit = BIT(chan->channel == INGENIC_ADC_AUX2); > + ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit); > + } > + > + clk_enable(adc->clk); > + ret = ingenic_adc_capture(adc, engine); > + if (ret) > + goto out; > + > + switch (chan->channel) { > + case INGENIC_ADC_AUX: > + case INGENIC_ADC_AUX2: > + *val = readw(adc->base + JZ_ADC_REG_ADSDAT); > + break; > + case INGENIC_ADC_BATTERY: > + *val = readw(adc->base + JZ_ADC_REG_ADBDAT); > + break; > + } > + > + ret = IIO_VAL_INT; > +out: > + clk_disable(adc->clk); > + mutex_unlock(&adc->aux_lock); > + > + return ret; > +} > + > static int ingenic_adc_read_raw(struct iio_dev *iio_dev, > struct iio_chan_spec const *chan, > int *val, > @@ -246,32 +355,14 @@ static int ingenic_adc_read_raw(struct iio_dev *iio_dev, > long m) > { > struct ingenic_adc *adc = iio_priv(iio_dev); > - int ret; > > switch (m) { > case IIO_CHAN_INFO_RAW: > - clk_enable(adc->clk); > - ret = ingenic_adc_capture(adc, chan->channel); > - if (ret) { > - clk_disable(adc->clk); > - return ret; > - } > - > - switch (chan->channel) { > - case INGENIC_ADC_AUX: > - *val = readw(adc->base + JZ_ADC_REG_ADSDAT); > - break; > - case INGENIC_ADC_BATTERY: > - *val = readw(adc->base + JZ_ADC_REG_ADBDAT); > - break; > - } > - > - clk_disable(adc->clk); > - > - return IIO_VAL_INT; > + return ingenic_adc_read_chan_info_raw(adc, chan, val); > case IIO_CHAN_INFO_SCALE: > switch (chan->channel) { > case INGENIC_ADC_AUX: > + case INGENIC_ADC_AUX2: > *val = JZ_ADC_AUX_VREF; > *val2 = JZ_ADC_AUX_VREF_BITS; > break; > @@ -322,6 +413,14 @@ static const struct iio_chan_spec ingenic_channels[] = { > .indexed = 1, > .channel = INGENIC_ADC_BATTERY, > }, > + { /* Must always be last in the array. */ > + .extend_name = "aux2", > + .type = IIO_VOLTAGE, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE), > + .indexed = 1, > + .channel = INGENIC_ADC_AUX2, > + }, > }; > > static int ingenic_adc_probe(struct platform_device *pdev) > @@ -343,6 +442,7 @@ static int ingenic_adc_probe(struct platform_device *pdev) > > adc = iio_priv(iio_dev); > mutex_init(&adc->lock); > + mutex_init(&adc->aux_lock); > adc->soc_data = soc_data; > > mem_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); > @@ -374,6 +474,7 @@ static int ingenic_adc_probe(struct platform_device *pdev) > /* Put hardware in a known passive state. */ > writeb(0x00, adc->base + JZ_ADC_REG_ENABLE); > writeb(0xff, adc->base + JZ_ADC_REG_CTRL); > + usleep_range(2000, 3000); /* Must wait at least 2ms. */ > clk_disable(adc->clk); > > ret = devm_add_action_or_reset(dev, ingenic_adc_clk_cleanup, adc->clk); > @@ -387,6 +488,9 @@ static int ingenic_adc_probe(struct platform_device *pdev) > iio_dev->modes = INDIO_DIRECT_MODE; > iio_dev->channels = ingenic_channels; > iio_dev->num_channels = ARRAY_SIZE(ingenic_channels); > + /* Remove AUX2 from the list of supported channels. */ > + if (!adc->soc_data->has_aux2) > + iio_dev->num_channels -= 1; > iio_dev->info = &ingenic_adc_info; > > ret = devm_iio_device_register(dev, iio_dev); > @@ -400,6 +504,7 @@ static int ingenic_adc_probe(struct platform_device *pdev) > static const struct of_device_id ingenic_adc_of_match[] = { > { .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, }, > { .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, }, > + { .compatible = "ingenic,jz4770-adc", .data = &jz4770_adc_soc_data, }, > { }, > }; > MODULE_DEVICE_TABLE(of, ingenic_adc_of_match);
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt index f01159f20d87..cd9048cf9dcf 100644 --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt @@ -5,6 +5,7 @@ Required properties: - compatible: Should be one of: * ingenic,jz4725b-adc * ingenic,jz4740-adc + * ingenic,jz4770-adc - reg: ADC controller registers location and length. - clocks: phandle to the SoC's ADC clock. - clock-names: Must be set to "adc".