| Message ID | 20190718094531.21423-5-jonnyc@amazon.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Amazon's Annapurna Labs DT-based PCIe host controller driver | expand |
On Thu, Jul 18, 2019 at 10:45:27, Jonathan Chocron <jonnyc@amazon.com> wrote: > The Root Port (identified by [1c36:0032]) doesn't support MSI-X. On some > platforms it is configured to not advertise the capability at all, while > on others it (mistakenly) does. This causes a panic during > initialization by the pcieport driver, since it tries to configure the > MSI-X capability. Specifically, when trying to access the MSI-X table > a "non-existing addr" exception occurs. > > Example stacktrace snippet: > > [ 1.632363] SError Interrupt on CPU2, code 0xbf000000 -- SError > [ 1.632364] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 > [ 1.632365] Hardware name: Annapurna Labs Alpine V3 EVP (DT) > [ 1.632365] pstate: 80000005 (Nzcv daif -PAN -UAO) > [ 1.632366] pc : __pci_enable_msix_range+0x4e4/0x608 > [ 1.632367] lr : __pci_enable_msix_range+0x498/0x608 > [ 1.632367] sp : ffffff80117db700 > [ 1.632368] x29: ffffff80117db700 x28: 0000000000000001 > [ 1.632370] x27: 0000000000000001 x26: 0000000000000000 > [ 1.632372] x25: ffffffd3e9d8c0b0 x24: 0000000000000000 > [ 1.632373] x23: 0000000000000000 x22: 0000000000000000 > [ 1.632375] x21: 0000000000000001 x20: 0000000000000000 > [ 1.632376] x19: ffffffd3e9d8c000 x18: ffffffffffffffff > [ 1.632378] x17: 0000000000000000 x16: 0000000000000000 > [ 1.632379] x15: ffffff80116496c8 x14: ffffffd3e9844503 > [ 1.632380] x13: ffffffd3e9844502 x12: 0000000000000038 > [ 1.632382] x11: ffffffffffffff00 x10: 0000000000000040 > [ 1.632384] x9 : ffffff801165e270 x8 : ffffff801165e268 > [ 1.632385] x7 : 0000000000000002 x6 : 00000000000000b2 > [ 1.632387] x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000 > [ 1.632388] x3 : 0000000000000000 x2 : 0000000000000000 > [ 1.632390] x1 : 0000000000000000 x0 : ffffffd3e9844680 > [ 1.632392] Kernel panic - not syncing: Asynchronous SError Interrupt > [ 1.632393] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 > [ 1.632394] Hardware name: Annapurna Labs Alpine V3 EVP (DT) > [ 1.632394] Call trace: > [ 1.632395] dump_backtrace+0x0/0x140 > [ 1.632395] show_stack+0x14/0x20 > [ 1.632396] dump_stack+0xa8/0xcc > [ 1.632396] panic+0x140/0x334 > [ 1.632397] nmi_panic+0x6c/0x70 > [ 1.632398] arm64_serror_panic+0x74/0x88 > [ 1.632398] __pte_error+0x0/0x28 > [ 1.632399] el1_error+0x84/0xf8 > [ 1.632400] __pci_enable_msix_range+0x4e4/0x608 > [ 1.632400] pci_alloc_irq_vectors_affinity+0xdc/0x150 > [ 1.632401] pcie_port_device_register+0x2b8/0x4e0 > [ 1.632402] pcie_portdrv_probe+0x34/0xf0 > > Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> > --- > drivers/pci/quirks.c | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 23672680dba7..11f843aa96b3 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -2925,6 +2925,21 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, > quirk_msi_intx_disable_qca_bug); > DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, > quirk_msi_intx_disable_qca_bug); > + > +/* > + * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it > + * should be disabled on platforms where the device (mistakenly) advertises it. > + * > + * The 0031 device id is reused for other non Root Port device types, > + * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class. > + */ > +static void quirk_al_msi_disable(struct pci_dev *dev) > +{ > + dev->no_msi = 1; > + pci_warn(dev, "Disabling MSI-X\n"); > +} > +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, > + PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable); > #endif /* CONFIG_PCI_MSI */ > > /* > -- > 2.17.1 Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 23672680dba7..11f843aa96b3 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2925,6 +2925,21 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, quirk_msi_intx_disable_qca_bug); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, quirk_msi_intx_disable_qca_bug); + +/* + * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it + * should be disabled on platforms where the device (mistakenly) advertises it. + * + * The 0031 device id is reused for other non Root Port device types, + * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class. + */ +static void quirk_al_msi_disable(struct pci_dev *dev) +{ + dev->no_msi = 1; + pci_warn(dev, "Disabling MSI-X\n"); +} +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, + PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable); #endif /* CONFIG_PCI_MSI */ /*
The Root Port (identified by [1c36:0032]) doesn't support MSI-X. On some platforms it is configured to not advertise the capability at all, while on others it (mistakenly) does. This causes a panic during initialization by the pcieport driver, since it tries to configure the MSI-X capability. Specifically, when trying to access the MSI-X table a "non-existing addr" exception occurs. Example stacktrace snippet: [ 1.632363] SError Interrupt on CPU2, code 0xbf000000 -- SError [ 1.632364] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 [ 1.632365] Hardware name: Annapurna Labs Alpine V3 EVP (DT) [ 1.632365] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 1.632366] pc : __pci_enable_msix_range+0x4e4/0x608 [ 1.632367] lr : __pci_enable_msix_range+0x498/0x608 [ 1.632367] sp : ffffff80117db700 [ 1.632368] x29: ffffff80117db700 x28: 0000000000000001 [ 1.632370] x27: 0000000000000001 x26: 0000000000000000 [ 1.632372] x25: ffffffd3e9d8c0b0 x24: 0000000000000000 [ 1.632373] x23: 0000000000000000 x22: 0000000000000000 [ 1.632375] x21: 0000000000000001 x20: 0000000000000000 [ 1.632376] x19: ffffffd3e9d8c000 x18: ffffffffffffffff [ 1.632378] x17: 0000000000000000 x16: 0000000000000000 [ 1.632379] x15: ffffff80116496c8 x14: ffffffd3e9844503 [ 1.632380] x13: ffffffd3e9844502 x12: 0000000000000038 [ 1.632382] x11: ffffffffffffff00 x10: 0000000000000040 [ 1.632384] x9 : ffffff801165e270 x8 : ffffff801165e268 [ 1.632385] x7 : 0000000000000002 x6 : 00000000000000b2 [ 1.632387] x5 : ffffffd3e9d8c2c0 x4 : 0000000000000000 [ 1.632388] x3 : 0000000000000000 x2 : 0000000000000000 [ 1.632390] x1 : 0000000000000000 x0 : ffffffd3e9844680 [ 1.632392] Kernel panic - not syncing: Asynchronous SError Interrupt [ 1.632393] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-Jonny-14847-ge76f1d4a1828-dirty #33 [ 1.632394] Hardware name: Annapurna Labs Alpine V3 EVP (DT) [ 1.632394] Call trace: [ 1.632395] dump_backtrace+0x0/0x140 [ 1.632395] show_stack+0x14/0x20 [ 1.632396] dump_stack+0xa8/0xcc [ 1.632396] panic+0x140/0x334 [ 1.632397] nmi_panic+0x6c/0x70 [ 1.632398] arm64_serror_panic+0x74/0x88 [ 1.632398] __pte_error+0x0/0x28 [ 1.632399] el1_error+0x84/0xf8 [ 1.632400] __pci_enable_msix_range+0x4e4/0x608 [ 1.632400] pci_alloc_irq_vectors_affinity+0xdc/0x150 [ 1.632401] pcie_port_device_register+0x2b8/0x4e0 [ 1.632402] pcie_portdrv_probe+0x34/0xf0 Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> --- drivers/pci/quirks.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)