diff mbox series

[2/3] pinctrl: bcm: Allow PINCTRL_BCM2835 for ARCH_BRCMSTB

Message ID 20190509205955.27842-3-f.fainelli@gmail.com
State New
Headers show
Series pinctrl: bcm: Allow PINCTRL_BCM2835 for ARCH_BRCMSTB | expand

Commit Message

Florian Fainelli May 9, 2019, 8:59 p.m. UTC 
From: Doug Berger <opendmb@gmail.com>

ARCH_BRCMSTB needs to use the BCM2835 pin controller for chips
like BCM7211 which adopted that pin controller for GPIO. This
commit makes the option menu configurable with default enabled
for ARCH_BRCMSTB and ARCH_BCM2835.

Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/pinctrl/bcm/Kconfig | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Comments

Linus Walleij May 16, 2019, 1:25 p.m. UTC | #1 
On Thu, May 9, 2019 at 11:01 PM Florian Fainelli <f.fainelli@gmail.com> wrote:

> From: Doug Berger <opendmb@gmail.com>
>
> ARCH_BRCMSTB needs to use the BCM2835 pin controller for chips
> like BCM7211 which adopted that pin controller for GPIO. This
> commit makes the option menu configurable with default enabled
> for ARCH_BRCMSTB and ARCH_BCM2835.
>
> Signed-off-by: Doug Berger <opendmb@gmail.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Patch applied for v5.3 with the ACKs.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index c8575399d6f7..c57f1d9259d8 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -17,11 +17,15 @@  config PINCTRL_BCM281XX
 	  framework.  GPIO is provided by a separate GPIO driver.
 
 config PINCTRL_BCM2835
-	bool
+	bool "Broadcom BCM2835 GPIO (with PINCONF) driver"
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
 	select GPIOLIB_IRQCHIP
+	default ARCH_BCM2835 || ARCH_BRCMSTB
+	help
+	   Say Y here to enable the Broadcom BCM2835 GPIO driver.
 
 config PINCTRL_IPROC_GPIO
 	bool "Broadcom iProc GPIO (with PINCONF) driver"