Message ID | 1542966777-1225-1-git-send-email-ynezz@true.cz |
---|---|
State | Not Applicable |
Delegated to: | John Crispin |
Headers | show |
Series | [OpenWrt-Devel] build: Add append-uboot-spl command | expand |
On 11/23/18 10:52 AM, Petr Štetiar wrote: > Example usage: > > Define Device/apalis > ... > UBOOT_PATH := $$(STAGING_DIR_IMAGE)/$$(UBOOT)-u-boot.img > UBOOT_SPL_PATH := $$(STAGING_DIR_IMAGE)/$$(UBOOT)-SPL > ARTIFACTS := spl-uboot.bin > ARTIFACT/spl-uboot.bin := append-uboot-spl | pad-to 68k | append-uboot > endef > > Signed-off-by: Petr Štetiar <ynezz@true.cz> Where do you need this? Normally the U-Boot build process creates a binary with the spl + u-boot. Hauke > --- > include/image-commands.mk | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/include/image-commands.mk b/include/image-commands.mk > index 05d3609..c324bc2 100644 > --- a/include/image-commands.mk > +++ b/include/image-commands.mk > @@ -221,6 +221,10 @@ define Build/append-uboot > dd if=$(UBOOT_PATH) >> $@ > endef > > +define Build/append-uboot-spl > + dd if=$(UBOOT_SPL_PATH) >> $@ > +endef > + > define Build/pad-to > dd if=$@ of=$@.new bs=$(1) conv=sync > mv $@.new $@ >
On November 24, 2018 1:06:45 PM UTC, Hauke Mehrtens <hauke@hauke-m.de> wrote: >Where do you need this? WIP support for i.mx6 Toradex Apalis board https://github.com/ynezz/openwrt/commits/wip/imx6-apalis > Normally the U-Boot build process creates a >binary with the spl + u-boot. Ok, I'll check it. Thanks. -- ynezz
Hauke Mehrtens <hauke@hauke-m.de> [2018-11-24 14:06:45]: Hi, > > UBOOT_PATH := $$(STAGING_DIR_IMAGE)/$$(UBOOT)-u-boot.img > > UBOOT_SPL_PATH := $$(STAGING_DIR_IMAGE)/$$(UBOOT)-SPL > > ARTIFACTS := spl-uboot.bin > > ARTIFACT/spl-uboot.bin := append-uboot-spl | pad-to 68k | append-uboot > > Where do you need this? Normally the U-Boot build process creates a > binary with the spl + u-boot. thanks for the hint, I was able to get exactly same image from U-boot with `make u-boot-with-spl.imx`. I've marked the patch in patchwork as `Not Applicable`, hope it's enough. -- ynezz
diff --git a/include/image-commands.mk b/include/image-commands.mk index 05d3609..c324bc2 100644 --- a/include/image-commands.mk +++ b/include/image-commands.mk @@ -221,6 +221,10 @@ define Build/append-uboot dd if=$(UBOOT_PATH) >> $@ endef +define Build/append-uboot-spl + dd if=$(UBOOT_SPL_PATH) >> $@ +endef + define Build/pad-to dd if=$@ of=$@.new bs=$(1) conv=sync mv $@.new $@
Example usage: Define Device/apalis ... UBOOT_PATH := $$(STAGING_DIR_IMAGE)/$$(UBOOT)-u-boot.img UBOOT_SPL_PATH := $$(STAGING_DIR_IMAGE)/$$(UBOOT)-SPL ARTIFACTS := spl-uboot.bin ARTIFACT/spl-uboot.bin := append-uboot-spl | pad-to 68k | append-uboot endef Signed-off-by: Petr Štetiar <ynezz@true.cz> --- include/image-commands.mk | 4 ++++ 1 file changed, 4 insertions(+)