@@ -22,56 +22,6 @@ config MTD_TESTS
WARNING: some of the tests will ERASE entire MTD device which they
test. Do not use these tests unless you really know what you do.
-config MTD_REDBOOT_PARTS
- tristate "RedBoot partition table parsing"
- help
- RedBoot is a ROM monitor and bootloader which deals with multiple
- 'images' in flash devices by putting a table one of the erase
- blocks on the device, similar to a partition table, which gives
- the offsets, lengths and names of all the images stored in the
- flash.
-
- If you need code which can detect and parse this table, and register
- MTD 'partitions' corresponding to each image in the table, enable
- this option.
-
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically. The
- SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
- example.
-
-if MTD_REDBOOT_PARTS
-
-config MTD_REDBOOT_DIRECTORY_BLOCK
- int "Location of RedBoot partition table"
- default "-1"
- help
- This option is the Linux counterpart to the
- CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time
- option.
-
- The option specifies which Flash sectors holds the RedBoot
- partition table. A zero or positive value gives an absolute
- erase block number. A negative value specifies a number of
- sectors before the end of the device.
-
- For example "2" means block number 2, "-1" means the last
- block and "-2" means the penultimate block.
-
-config MTD_REDBOOT_PARTS_UNALLOCATED
- bool "Include unallocated flash regions"
- help
- If you need to register each unallocated flash region as a MTD
- 'partition', enable this option.
-
-config MTD_REDBOOT_PARTS_READONLY
- bool "Force read-only for RedBoot system images"
- help
- If you need to force read-only for 'RedBoot', 'RedBoot Config' and
- 'FIS directory' images, enable this option.
-
-endif # MTD_REDBOOT_PARTS
-
config MTD_CMDLINE_PARTS
tristate "Command line partition table parsing"
depends on MTD
@@ -8,7 +8,6 @@ obj-$(CONFIG_MTD) += mtd.o
mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
-obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
@@ -14,3 +14,53 @@ config MTD_SHARPSL_PARTS
This provides the read-only FTL logic necessary to read the partition
table from the NAND flash of Sharp SL Series (Zaurus) and the MTD
partition parser using this code.
+
+config MTD_REDBOOT_PARTS
+ tristate "RedBoot partition table parsing"
+ help
+ RedBoot is a ROM monitor and bootloader which deals with multiple
+ 'images' in flash devices by putting a table one of the erase
+ blocks on the device, similar to a partition table, which gives
+ the offsets, lengths and names of all the images stored in the
+ flash.
+
+ If you need code which can detect and parse this table, and register
+ MTD 'partitions' corresponding to each image in the table, enable
+ this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically. The
+ SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
+ example.
+
+if MTD_REDBOOT_PARTS
+
+config MTD_REDBOOT_DIRECTORY_BLOCK
+ int "Location of RedBoot partition table"
+ default "-1"
+ help
+ This option is the Linux counterpart to the
+ CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time
+ option.
+
+ The option specifies which Flash sectors holds the RedBoot
+ partition table. A zero or positive value gives an absolute
+ erase block number. A negative value specifies a number of
+ sectors before the end of the device.
+
+ For example "2" means block number 2, "-1" means the last
+ block and "-2" means the penultimate block.
+
+config MTD_REDBOOT_PARTS_UNALLOCATED
+ bool "Include unallocated flash regions"
+ help
+ If you need to register each unallocated flash region as a MTD
+ 'partition', enable this option.
+
+config MTD_REDBOOT_PARTS_READONLY
+ bool "Force read-only for RedBoot system images"
+ help
+ If you need to force read-only for 'RedBoot', 'RedBoot Config' and
+ 'FIS directory' images, enable this option.
+
+endif # MTD_REDBOOT_PARTS
@@ -1,2 +1,3 @@
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
+obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
similarity index 100%
rename from drivers/mtd/redboot.c
rename to drivers/mtd/parsers/redboot.c
This moves the Redboot partition parser down to the parsers subdirectory. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Rebased on linux-mtd-next for v4.21 --- drivers/mtd/Kconfig | 50 ----------------------------- drivers/mtd/Makefile | 1 - drivers/mtd/parsers/Kconfig | 50 +++++++++++++++++++++++++++++ drivers/mtd/parsers/Makefile | 1 + drivers/mtd/{ => parsers}/redboot.c | 0 5 files changed, 51 insertions(+), 51 deletions(-) rename drivers/mtd/{ => parsers}/redboot.c (100%)