Message ID | 1516850586-4226-1-git-send-email-gvrose8192@gmail.com |
---|---|
State | Changes Requested |
Headers | show |
Series | [ovs-dev] rhel: Change depmod configuration | expand |
Hi Greg, Greg Rose <gvrose8192@gmail.com> writes: > A previous patch added post install and post uninstall scripts which > use the weak-modules utility to make sure that openvswitch kernel > modules are copied to the correct kernel directory. While this > patch did fix some issues there are two remaining issues we have > found. > > 1) In the case where the OS is running kernel X and the openvswitch > kernel modules have been previously installed correctly and are > working without a problem and then updating to Kernel X.1 we find > that the correct openvswitch kernel module no longer loads. > 2) In the case where a kernel module rpm has been built against an > older kernel but installed on a newer kernel then the correct > openvswitch kernel module will not load. > > This patch changes the weak-modules parameter to --add-kernel instead > of --add-modules. This fixes the problem in case 1. In addition > we modify the openvswitch depmod configuration file installed to the > /etc/depmod.d directory and prepend a "01" to the name of the file. > We then insert the first line of the file with a search path that > will find weak-updates first. This change along with the change > to the weak-modules utility parameters fixes the problem in case 2. > > I also modified the kernel module configuration file for both the > rhel6 and rhel7/fedora specs to use a common "01openvswitch.conf" > file name format. > > Cc: Flavio Leitner <fbl@sysclose.org> > Co-authored-by: Gurucharan Shetty <guru@ovn.org> > Signed-off-by: Greg Rose <gvrose8192@gmail.com> > --- Nit: The co-authored-by requires a signoff (according to the contributing guide) from the author. I didn't look at the contents of the patch since I'm not as familiar with weak-updates as I probably should be (more of a dkms fan, myself). -Aaron
On 1/25/2018 12:58 PM, Aaron Conole wrote: > Hi Greg, > > Greg Rose <gvrose8192@gmail.com> writes: > >> A previous patch added post install and post uninstall scripts which >> use the weak-modules utility to make sure that openvswitch kernel >> modules are copied to the correct kernel directory. While this >> patch did fix some issues there are two remaining issues we have >> found. >> >> 1) In the case where the OS is running kernel X and the openvswitch >> kernel modules have been previously installed correctly and are >> working without a problem and then updating to Kernel X.1 we find >> that the correct openvswitch kernel module no longer loads. >> 2) In the case where a kernel module rpm has been built against an >> older kernel but installed on a newer kernel then the correct >> openvswitch kernel module will not load. >> >> This patch changes the weak-modules parameter to --add-kernel instead >> of --add-modules. This fixes the problem in case 1. In addition >> we modify the openvswitch depmod configuration file installed to the >> /etc/depmod.d directory and prepend a "01" to the name of the file. >> We then insert the first line of the file with a search path that >> will find weak-updates first. This change along with the change >> to the weak-modules utility parameters fixes the problem in case 2. >> >> I also modified the kernel module configuration file for both the >> rhel6 and rhel7/fedora specs to use a common "01openvswitch.conf" >> file name format. >> >> Cc: Flavio Leitner <fbl@sysclose.org> >> Co-authored-by: Gurucharan Shetty <guru@ovn.org> >> Signed-off-by: Greg Rose <gvrose8192@gmail.com> >> --- > Nit: The co-authored-by requires a signoff (according to the > contributing guide) from the author. Oops. I'll send V2 with that fixed after more review time. I'm hoping Flavio can review it since he reviewed the initial patches. Thanks, - Greg > > I didn't look at the contents of the patch since I'm not as familiar > with weak-updates as I probably should be (more of a dkms fan, myself). > > -Aaron
On Wed, Jan 24, 2018 at 07:23:06PM -0800, Greg Rose wrote: > A previous patch added post install and post uninstall scripts which > use the weak-modules utility to make sure that openvswitch kernel > modules are copied to the correct kernel directory. While this > patch did fix some issues there are two remaining issues we have > found. > > 1) In the case where the OS is running kernel X and the openvswitch > kernel modules have been previously installed correctly and are > working without a problem and then updating to Kernel X.1 we find > that the correct openvswitch kernel module no longer loads. > 2) In the case where a kernel module rpm has been built against an > older kernel but installed on a newer kernel then the correct > openvswitch kernel module will not load. > > This patch changes the weak-modules parameter to --add-kernel instead > of --add-modules. This fixes the problem in case 1. In addition > we modify the openvswitch depmod configuration file installed to the > /etc/depmod.d directory and prepend a "01" to the name of the file. > We then insert the first line of the file with a search path that > will find weak-updates first. This change along with the change > to the weak-modules utility parameters fixes the problem in case 2. > > I also modified the kernel module configuration file for both the > rhel6 and rhel7/fedora specs to use a common "01openvswitch.conf" > file name format. Well, we used kmods in the past to provide modules that were not shipped with the kernel, so that might be the reason I didn't see the depmod config tweaking before. Although it seems we need to take care of that in this case, messing with the default search order doesn't sound like a good idea to me. What about this instead? I found that in a couple kmod specs. override openvswitch * weak-updates/openvswitch This is documented in depmod.d(5) [...] override modulename kernelversion modulesubdirectory This command allows you to override which version of a specific module will be used when more than one module sharing the same name is processed by the depmod command. It is possible to specify one kernel or all kernels using the * wildcard. modulesubdirectory is the name of the subdirectory under /lib/modules (or other module location) where the target module is installed. For example, it is possible to override the priority of an updated test module called kmod by specifying the following command: "override kmod * extra". This will ensure that any matching module name installed under the extra subdirectory within /lib/modules (or other module location) will take priority over any likenamed module already provided by the kernel. That seems better because it doesn't depend on the depmod config filename (no config processing order issue), it doesn't change system's default, or impact possible other kmod or even custom configurations other than the specific for this kmod. Regarding to change --add-modules to --add-kernel, well, I don't see how that is helping. Maybe I am missing something, but every time a kernel is installed, it will run weak-modules --add-kernel which should create the weak-updates links accordingly, unless the kernel is not compatible. You can verify what the kernel's post install scripts does with this command: # rpm -q kernel --scripts You should find this snippet: if [ -x /sbin/weak-modules ] then /sbin/weak-modules --add-kernel 2.6.32-696.18.7.el6.x86_64 || exit $? fi fbl > > Cc: Flavio Leitner <fbl@sysclose.org> > Co-authored-by: Gurucharan Shetty <guru@ovn.org> > Signed-off-by: Greg Rose <gvrose8192@gmail.com> > --- > rhel/openvswitch-kmod-fedora.spec.in | 12 +++++++----- > rhel/openvswitch-kmod-rhel6.spec.in | 14 ++++++++------ > rhel/openvswitch-kmod.files | 2 +- > 3 files changed, 16 insertions(+), 12 deletions(-) > > diff --git a/rhel/openvswitch-kmod-fedora.spec.in b/rhel/openvswitch-kmod-fedora.spec.in > index c0cd298..ae3a4d8 100644 > --- a/rhel/openvswitch-kmod-fedora.spec.in > +++ b/rhel/openvswitch-kmod-fedora.spec.in > @@ -43,13 +43,15 @@ make %{_smp_mflags} -C datapath/linux > rm -rf $RPM_BUILD_ROOT > make INSTALL_MOD_PATH=$RPM_BUILD_ROOT -C datapath/linux modules_install > mkdir -p $RPM_BUILD_ROOT/etc/depmod.d > + > +echo "search weak-updates updates extra built-in" >> $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf > for module in $RPM_BUILD_ROOT/lib/modules/%{kernel}/extra/*.ko > do > modname="$(basename ${module})" > echo "override ${modname%.ko} * extra" >> \ > - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf > + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf > echo "override ${modname%.ko} * weak-updates" >> \ > - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf > + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf > done > > %clean > @@ -64,7 +66,7 @@ if [ -x "/sbin/weak-modules" ]; then > for m in openvswitch vport-gre vport-stt vport-geneve \ > vport-lisp vport-vxlan; do > echo "/lib/modules/%{kernel}/extra/$m.ko" > - done | /sbin/weak-modules --add-modules > + done | /sbin/weak-modules --add-kernel > fi > > %postun > @@ -76,14 +78,14 @@ if [ "$1" = 0 ]; then # Erase, not upgrade > for m in openvswitch vport-gre vport-stt vport-geneve \ > vport-lisp vport-vxlan; do > echo "/lib/modules/%{kernel}/extra/$m.ko" > - done | /sbin/weak-modules --remove-modules > + done | /sbin/weak-modules --remove-kernel > fi > fi > > %files > %defattr(0644,root,root) > /lib/modules/%{kernel}/extra/*.ko > -/etc/depmod.d/kmod-openvswitch.conf > +/etc/depmod.d/01openvswitch.conf > %exclude /lib/modules/%{kernel}/modules.* > > %changelog > diff --git a/rhel/openvswitch-kmod-rhel6.spec.in b/rhel/openvswitch-kmod-rhel6.spec.in > index c6e6db5..28c7ce1 100644 > --- a/rhel/openvswitch-kmod-rhel6.spec.in > +++ b/rhel/openvswitch-kmod-rhel6.spec.in > @@ -62,13 +62,15 @@ for flavor in %flavors_to_build ; do > find $INSTALL_MOD_PATH/lib/modules -iname 'modules.*' -exec rm {} \; > done > install -d %{buildroot}%{_sysconfdir}/depmod.d/ > + > +echo "search extra/openvswitch weak-updates/openvswitch updates extra built-in weak-updates" >> 01%{oname}.conf > for module in %{buildroot}/lib/modules/%{kernel_version}/$INSTALL_MOD_DIR/*.ko; > do > modname="$(basename ${module})" > - echo "override ${modname%.ko} * extra/%{oname}" >> %{oname}.conf > - echo "override ${modname%.ko} * weak-updates/%{oname}" >> %{oname}.conf > + echo "override ${modname%.ko} * extra/%{oname}" >> 01%{oname}.conf > + echo "override ${modname%.ko} * weak-updates/%{oname}" >> 01%{oname}.conf > done > -install -m 644 %{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ > +install -m 644 01%{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ > > %post > # Ensure that modprobe will find our modules. > @@ -79,7 +81,7 @@ if [ -x "/sbin/weak-modules" ]; then > for m in openvswitch vport-gre vport-stt vport-geneve \ > vport-lisp vport-vxlan; do > echo "/lib/modules/%{kernel}/extra/$m.ko" > - done | /sbin/weak-modules --add-modules > + done | /sbin/weak-modules --add-kernel > fi > > %postun > @@ -91,13 +93,13 @@ if [ "$1" = 0 ]; then # Erase, not upgrade > for m in openvswitch vport-gre vport-stt vport-geneve \ > vport-lisp vport-vxlan; do > echo "/lib/modules/%{kernel}/extra/$m.ko" > - done | /sbin/weak-modules --remove-modules > + done | /sbin/weak-modules --remove-kernel > fi > fi > > %files > %defattr(644,root,root) > -/etc/depmod.d/%{oname}.conf > +/etc/depmod.d/01%{oname}.conf > > %clean > rm -rf $RPM_BUILD_ROOT > diff --git a/rhel/openvswitch-kmod.files b/rhel/openvswitch-kmod.files > index 357c2e8..49262f3 100644 > --- a/rhel/openvswitch-kmod.files > +++ b/rhel/openvswitch-kmod.files > @@ -1,3 +1,3 @@ > %defattr(644,root,root,755) > /lib/modules/%2-%1 > -/etc/depmod.d/openvswitch.conf > +/etc/depmod.d/01openvswitch.conf > -- > 1.8.3.1 > > _______________________________________________ > dev mailing list > dev@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev
On 1/26/2018 5:30 AM, Flavio Leitner wrote: > On Wed, Jan 24, 2018 at 07:23:06PM -0800, Greg Rose wrote: >> A previous patch added post install and post uninstall scripts which >> use the weak-modules utility to make sure that openvswitch kernel >> modules are copied to the correct kernel directory. While this >> patch did fix some issues there are two remaining issues we have >> found. >> >> 1) In the case where the OS is running kernel X and the openvswitch >> kernel modules have been previously installed correctly and are >> working without a problem and then updating to Kernel X.1 we find >> that the correct openvswitch kernel module no longer loads. >> 2) In the case where a kernel module rpm has been built against an >> older kernel but installed on a newer kernel then the correct >> openvswitch kernel module will not load. >> >> This patch changes the weak-modules parameter to --add-kernel instead >> of --add-modules. This fixes the problem in case 1. In addition >> we modify the openvswitch depmod configuration file installed to the >> /etc/depmod.d directory and prepend a "01" to the name of the file. >> We then insert the first line of the file with a search path that >> will find weak-updates first. This change along with the change >> to the weak-modules utility parameters fixes the problem in case 2. >> >> I also modified the kernel module configuration file for both the >> rhel6 and rhel7/fedora specs to use a common "01openvswitch.conf" >> file name format. > Well, we used kmods in the past to provide modules that were not > shipped with the kernel, so that might be the reason I didn't see > the depmod config tweaking before. Although it seems we need to take > care of that in this case, messing with the default search order > doesn't sound like a good idea to me. > > What about this instead? I found that in a couple kmod specs. > > override openvswitch * weak-updates/openvswitch Yes, we are uncomfortable with messing with the default search order as well but nothing else seemed to be working. I'll try your suggestion. > > This is documented in depmod.d(5) > [...] > override modulename kernelversion modulesubdirectory > This command allows you to override which version of a > specific module will be used when more than one module sharing the > same name is processed by the depmod command. It is possible > to specify one kernel or all kernels using the * wildcard. > modulesubdirectory is the name of the subdirectory under /lib/modules > (or other module location) where the target module is > installed. > > For example, it is possible to override the priority of an > updated test module called kmod by specifying the following command: > "override kmod * extra". This will ensure that any > matching module name installed under the extra subdirectory > within /lib/modules (or other module location) will take priority over > any likenamed module already provided by the kernel. > > > That seems better because it doesn't depend on the depmod config > filename (no config processing order issue), it doesn't change > system's default, or impact possible other kmod or even custom > configurations other than the specific for this kmod. We've tried variations of this but no luck so far. But I understand your concern. > > Regarding to change --add-modules to --add-kernel, well, I don't see > how that is helping. Maybe I am missing something, but every time a > kernel is installed, it will run weak-modules --add-kernel which > should create the weak-updates links accordingly, unless the kernel > is not compatible. > > You can verify what the kernel's post install scripts does with this > command: > # rpm -q kernel --scripts > > You should find this snippet: > if [ -x /sbin/weak-modules ] > then > /sbin/weak-modules --add-kernel 2.6.32-696.18.7.el6.x86_64 || exit $? > fi OK, let me check that again as well but we were definitely seeing situations in which the --add-modules was not working. The kernel modules were simply not installed. At all. But using --add-kernel seemed to fix it. I only found out about the add-kernel option while looking at the weak-modules script and it seemed to fix the situation I was looking at. I'll re-verify using the rpm -q kernel --scripts command. After some further investigation I'll get back with my findings. Maybe not until mid next week though because I have some other duties to attend to as well. I really appreciate your feed back Flavio! Thanks!!! - Greg > > fbl > >> Cc: Flavio Leitner <fbl@sysclose.org> >> Co-authored-by: Gurucharan Shetty <guru@ovn.org> >> Signed-off-by: Greg Rose <gvrose8192@gmail.com> >> --- >> rhel/openvswitch-kmod-fedora.spec.in | 12 +++++++----- >> rhel/openvswitch-kmod-rhel6.spec.in | 14 ++++++++------ >> rhel/openvswitch-kmod.files | 2 +- >> 3 files changed, 16 insertions(+), 12 deletions(-) >> >> diff --git a/rhel/openvswitch-kmod-fedora.spec.in b/rhel/openvswitch-kmod-fedora.spec.in >> index c0cd298..ae3a4d8 100644 >> --- a/rhel/openvswitch-kmod-fedora.spec.in >> +++ b/rhel/openvswitch-kmod-fedora.spec.in >> @@ -43,13 +43,15 @@ make %{_smp_mflags} -C datapath/linux >> rm -rf $RPM_BUILD_ROOT >> make INSTALL_MOD_PATH=$RPM_BUILD_ROOT -C datapath/linux modules_install >> mkdir -p $RPM_BUILD_ROOT/etc/depmod.d >> + >> +echo "search weak-updates updates extra built-in" >> $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf >> for module in $RPM_BUILD_ROOT/lib/modules/%{kernel}/extra/*.ko >> do >> modname="$(basename ${module})" >> echo "override ${modname%.ko} * extra" >> \ >> - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf >> + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf >> echo "override ${modname%.ko} * weak-updates" >> \ >> - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf >> + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf >> done >> >> %clean >> @@ -64,7 +66,7 @@ if [ -x "/sbin/weak-modules" ]; then >> for m in openvswitch vport-gre vport-stt vport-geneve \ >> vport-lisp vport-vxlan; do >> echo "/lib/modules/%{kernel}/extra/$m.ko" >> - done | /sbin/weak-modules --add-modules >> + done | /sbin/weak-modules --add-kernel >> fi >> >> %postun >> @@ -76,14 +78,14 @@ if [ "$1" = 0 ]; then # Erase, not upgrade >> for m in openvswitch vport-gre vport-stt vport-geneve \ >> vport-lisp vport-vxlan; do >> echo "/lib/modules/%{kernel}/extra/$m.ko" >> - done | /sbin/weak-modules --remove-modules >> + done | /sbin/weak-modules --remove-kernel >> fi >> fi >> >> %files >> %defattr(0644,root,root) >> /lib/modules/%{kernel}/extra/*.ko >> -/etc/depmod.d/kmod-openvswitch.conf >> +/etc/depmod.d/01openvswitch.conf >> %exclude /lib/modules/%{kernel}/modules.* >> >> %changelog >> diff --git a/rhel/openvswitch-kmod-rhel6.spec.in b/rhel/openvswitch-kmod-rhel6.spec.in >> index c6e6db5..28c7ce1 100644 >> --- a/rhel/openvswitch-kmod-rhel6.spec.in >> +++ b/rhel/openvswitch-kmod-rhel6.spec.in >> @@ -62,13 +62,15 @@ for flavor in %flavors_to_build ; do >> find $INSTALL_MOD_PATH/lib/modules -iname 'modules.*' -exec rm {} \; >> done >> install -d %{buildroot}%{_sysconfdir}/depmod.d/ >> + >> +echo "search extra/openvswitch weak-updates/openvswitch updates extra built-in weak-updates" >> 01%{oname}.conf >> for module in %{buildroot}/lib/modules/%{kernel_version}/$INSTALL_MOD_DIR/*.ko; >> do >> modname="$(basename ${module})" >> - echo "override ${modname%.ko} * extra/%{oname}" >> %{oname}.conf >> - echo "override ${modname%.ko} * weak-updates/%{oname}" >> %{oname}.conf >> + echo "override ${modname%.ko} * extra/%{oname}" >> 01%{oname}.conf >> + echo "override ${modname%.ko} * weak-updates/%{oname}" >> 01%{oname}.conf >> done >> -install -m 644 %{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ >> +install -m 644 01%{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ >> >> %post >> # Ensure that modprobe will find our modules. >> @@ -79,7 +81,7 @@ if [ -x "/sbin/weak-modules" ]; then >> for m in openvswitch vport-gre vport-stt vport-geneve \ >> vport-lisp vport-vxlan; do >> echo "/lib/modules/%{kernel}/extra/$m.ko" >> - done | /sbin/weak-modules --add-modules >> + done | /sbin/weak-modules --add-kernel >> fi >> >> %postun >> @@ -91,13 +93,13 @@ if [ "$1" = 0 ]; then # Erase, not upgrade >> for m in openvswitch vport-gre vport-stt vport-geneve \ >> vport-lisp vport-vxlan; do >> echo "/lib/modules/%{kernel}/extra/$m.ko" >> - done | /sbin/weak-modules --remove-modules >> + done | /sbin/weak-modules --remove-kernel >> fi >> fi >> >> %files >> %defattr(644,root,root) >> -/etc/depmod.d/%{oname}.conf >> +/etc/depmod.d/01%{oname}.conf >> >> %clean >> rm -rf $RPM_BUILD_ROOT >> diff --git a/rhel/openvswitch-kmod.files b/rhel/openvswitch-kmod.files >> index 357c2e8..49262f3 100644 >> --- a/rhel/openvswitch-kmod.files >> +++ b/rhel/openvswitch-kmod.files >> @@ -1,3 +1,3 @@ >> %defattr(644,root,root,755) >> /lib/modules/%2-%1 >> -/etc/depmod.d/openvswitch.conf >> +/etc/depmod.d/01openvswitch.conf >> -- >> 1.8.3.1 >> >> _______________________________________________ >> dev mailing list >> dev@openvswitch.org >> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
On Fri, Jan 26, 2018 at 10:03:53AM -0800, Gregory Rose wrote: > On 1/26/2018 5:30 AM, Flavio Leitner wrote: > > Regarding to change --add-modules to --add-kernel, well, I don't see > > how that is helping. Maybe I am missing something, but every time a > > kernel is installed, it will run weak-modules --add-kernel which > > should create the weak-updates links accordingly, unless the kernel > > is not compatible. > > > > You can verify what the kernel's post install scripts does with this > > command: > > # rpm -q kernel --scripts > > > > You should find this snippet: > > if [ -x /sbin/weak-modules ] > > then > > /sbin/weak-modules --add-kernel 2.6.32-696.18.7.el6.x86_64 || exit $? > > fi > > OK, let me check that again as well but we were definitely seeing situations > in which the > --add-modules was not working. The kernel modules were simply not > installed. At all. > But using --add-kernel seemed to fix it. I only found out about the > add-kernel option > while looking at the weak-modules script and it seemed to fix the situation > I was looking at. > I'll re-verify using the rpm -q kernel --scripts command. After some > further investigation I'll > get back with my findings. Maybe not until mid next week though because I > have some other > duties to attend to as well. The --add-module would be executed by kmod to add specific modules to all installed and supported kernels while --add-kernel would be executed by the kernel package to get all modules symlinks done for this kernel. Also that --add-kernel receives a kernel version as parameter and not the module list from stdin. What is happening is that it is updating the symlinks for the running kernel only ($1 is empty). I don't know how you're reproducing this, but perhaps you can change those %post/%pre sections to capture the system's state before and after, or even save outputs with debugging enabled (set -x) to temp files. e.g.: sh -x /sbin/weak-modules &> /tmp/weak-modules.log HTH, fbl > > I really appreciate your feed back Flavio! Thanks!!! > > - Greg > > > > > fbl > > > > > Cc: Flavio Leitner <fbl@sysclose.org> > > > Co-authored-by: Gurucharan Shetty <guru@ovn.org> > > > Signed-off-by: Greg Rose <gvrose8192@gmail.com> > > > --- > > > rhel/openvswitch-kmod-fedora.spec.in | 12 +++++++----- > > > rhel/openvswitch-kmod-rhel6.spec.in | 14 ++++++++------ > > > rhel/openvswitch-kmod.files | 2 +- > > > 3 files changed, 16 insertions(+), 12 deletions(-) > > > > > > diff --git a/rhel/openvswitch-kmod-fedora.spec.in b/rhel/openvswitch-kmod-fedora.spec.in > > > index c0cd298..ae3a4d8 100644 > > > --- a/rhel/openvswitch-kmod-fedora.spec.in > > > +++ b/rhel/openvswitch-kmod-fedora.spec.in > > > @@ -43,13 +43,15 @@ make %{_smp_mflags} -C datapath/linux > > > rm -rf $RPM_BUILD_ROOT > > > make INSTALL_MOD_PATH=$RPM_BUILD_ROOT -C datapath/linux modules_install > > > mkdir -p $RPM_BUILD_ROOT/etc/depmod.d > > > + > > > +echo "search weak-updates updates extra built-in" >> $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf > > > for module in $RPM_BUILD_ROOT/lib/modules/%{kernel}/extra/*.ko > > > do > > > modname="$(basename ${module})" > > > echo "override ${modname%.ko} * extra" >> \ > > > - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf > > > + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf > > > echo "override ${modname%.ko} * weak-updates" >> \ > > > - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf > > > + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf > > > done > > > %clean > > > @@ -64,7 +66,7 @@ if [ -x "/sbin/weak-modules" ]; then > > > for m in openvswitch vport-gre vport-stt vport-geneve \ > > > vport-lisp vport-vxlan; do > > > echo "/lib/modules/%{kernel}/extra/$m.ko" > > > - done | /sbin/weak-modules --add-modules > > > + done | /sbin/weak-modules --add-kernel > > > fi > > > %postun > > > @@ -76,14 +78,14 @@ if [ "$1" = 0 ]; then # Erase, not upgrade > > > for m in openvswitch vport-gre vport-stt vport-geneve \ > > > vport-lisp vport-vxlan; do > > > echo "/lib/modules/%{kernel}/extra/$m.ko" > > > - done | /sbin/weak-modules --remove-modules > > > + done | /sbin/weak-modules --remove-kernel > > > fi > > > fi > > > %files > > > %defattr(0644,root,root) > > > /lib/modules/%{kernel}/extra/*.ko > > > -/etc/depmod.d/kmod-openvswitch.conf > > > +/etc/depmod.d/01openvswitch.conf > > > %exclude /lib/modules/%{kernel}/modules.* > > > %changelog > > > diff --git a/rhel/openvswitch-kmod-rhel6.spec.in b/rhel/openvswitch-kmod-rhel6.spec.in > > > index c6e6db5..28c7ce1 100644 > > > --- a/rhel/openvswitch-kmod-rhel6.spec.in > > > +++ b/rhel/openvswitch-kmod-rhel6.spec.in > > > @@ -62,13 +62,15 @@ for flavor in %flavors_to_build ; do > > > find $INSTALL_MOD_PATH/lib/modules -iname 'modules.*' -exec rm {} \; > > > done > > > install -d %{buildroot}%{_sysconfdir}/depmod.d/ > > > + > > > +echo "search extra/openvswitch weak-updates/openvswitch updates extra built-in weak-updates" >> 01%{oname}.conf > > > for module in %{buildroot}/lib/modules/%{kernel_version}/$INSTALL_MOD_DIR/*.ko; > > > do > > > modname="$(basename ${module})" > > > - echo "override ${modname%.ko} * extra/%{oname}" >> %{oname}.conf > > > - echo "override ${modname%.ko} * weak-updates/%{oname}" >> %{oname}.conf > > > + echo "override ${modname%.ko} * extra/%{oname}" >> 01%{oname}.conf > > > + echo "override ${modname%.ko} * weak-updates/%{oname}" >> 01%{oname}.conf > > > done > > > -install -m 644 %{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ > > > +install -m 644 01%{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ > > > %post > > > # Ensure that modprobe will find our modules. > > > @@ -79,7 +81,7 @@ if [ -x "/sbin/weak-modules" ]; then > > > for m in openvswitch vport-gre vport-stt vport-geneve \ > > > vport-lisp vport-vxlan; do > > > echo "/lib/modules/%{kernel}/extra/$m.ko" > > > - done | /sbin/weak-modules --add-modules > > > + done | /sbin/weak-modules --add-kernel > > > fi > > > %postun > > > @@ -91,13 +93,13 @@ if [ "$1" = 0 ]; then # Erase, not upgrade > > > for m in openvswitch vport-gre vport-stt vport-geneve \ > > > vport-lisp vport-vxlan; do > > > echo "/lib/modules/%{kernel}/extra/$m.ko" > > > - done | /sbin/weak-modules --remove-modules > > > + done | /sbin/weak-modules --remove-kernel > > > fi > > > fi > > > %files > > > %defattr(644,root,root) > > > -/etc/depmod.d/%{oname}.conf > > > +/etc/depmod.d/01%{oname}.conf > > > %clean > > > rm -rf $RPM_BUILD_ROOT > > > diff --git a/rhel/openvswitch-kmod.files b/rhel/openvswitch-kmod.files > > > index 357c2e8..49262f3 100644 > > > --- a/rhel/openvswitch-kmod.files > > > +++ b/rhel/openvswitch-kmod.files > > > @@ -1,3 +1,3 @@ > > > %defattr(644,root,root,755) > > > /lib/modules/%2-%1 > > > -/etc/depmod.d/openvswitch.conf > > > +/etc/depmod.d/01openvswitch.conf > > > -- > > > 1.8.3.1 > > > > > > _______________________________________________ > > > dev mailing list > > > dev@openvswitch.org > > > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > > _______________________________________________ > dev mailing list > dev@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev
On 1/26/2018 10:41 AM, Flavio Leitner wrote: > On Fri, Jan 26, 2018 at 10:03:53AM -0800, Gregory Rose wrote: >> On 1/26/2018 5:30 AM, Flavio Leitner wrote: >>> Regarding to change --add-modules to --add-kernel, well, I don't see >>> how that is helping. Maybe I am missing something, but every time a >>> kernel is installed, it will run weak-modules --add-kernel which >>> should create the weak-updates links accordingly, unless the kernel >>> is not compatible. >>> >>> You can verify what the kernel's post install scripts does with this >>> command: >>> # rpm -q kernel --scripts >>> >>> You should find this snippet: >>> if [ -x /sbin/weak-modules ] >>> then >>> /sbin/weak-modules --add-kernel 2.6.32-696.18.7.el6.x86_64 || exit $? >>> fi >> OK, let me check that again as well but we were definitely seeing situations >> in which the >> --add-modules was not working. The kernel modules were simply not >> installed. At all. >> But using --add-kernel seemed to fix it. I only found out about the >> add-kernel option >> while looking at the weak-modules script and it seemed to fix the situation >> I was looking at. >> I'll re-verify using the rpm -q kernel --scripts command. After some >> further investigation I'll >> get back with my findings. Maybe not until mid next week though because I >> have some other >> duties to attend to as well. > The --add-module would be executed by kmod to add specific modules > to all installed and supported kernels while --add-kernel would be > executed by the kernel package to get all modules symlinks done > for this kernel. > > Also that --add-kernel receives a kernel version as parameter and > not the module list from stdin. What is happening is that it is > updating the symlinks for the running kernel only ($1 is empty). OK, missed that while trying to make sense of that script. :) But, it did (at least seem) to fix the cases I mentioned. However, based upon your comments it was a side effect of something else I guess. > I don't know how you're reproducing this, but perhaps you can change > those %post/%pre sections to capture the system's state before and > after, or even save outputs with debugging enabled (set -x) to > temp files. > > e.g.: sh -x /sbin/weak-modules &> /tmp/weak-modules.log Good idea. Thanks for the pointers! - Greg > > HTH, > fbl > >> I really appreciate your feed back Flavio! Thanks!!! >> >> - Greg >> >>> fbl >>> >>>> Cc: Flavio Leitner <fbl@sysclose.org> >>>> Co-authored-by: Gurucharan Shetty <guru@ovn.org> >>>> Signed-off-by: Greg Rose <gvrose8192@gmail.com> >>>> --- >>>> rhel/openvswitch-kmod-fedora.spec.in | 12 +++++++----- >>>> rhel/openvswitch-kmod-rhel6.spec.in | 14 ++++++++------ >>>> rhel/openvswitch-kmod.files | 2 +- >>>> 3 files changed, 16 insertions(+), 12 deletions(-) >>>> >>>> diff --git a/rhel/openvswitch-kmod-fedora.spec.in b/rhel/openvswitch-kmod-fedora.spec.in >>>> index c0cd298..ae3a4d8 100644 >>>> --- a/rhel/openvswitch-kmod-fedora.spec.in >>>> +++ b/rhel/openvswitch-kmod-fedora.spec.in >>>> @@ -43,13 +43,15 @@ make %{_smp_mflags} -C datapath/linux >>>> rm -rf $RPM_BUILD_ROOT >>>> make INSTALL_MOD_PATH=$RPM_BUILD_ROOT -C datapath/linux modules_install >>>> mkdir -p $RPM_BUILD_ROOT/etc/depmod.d >>>> + >>>> +echo "search weak-updates updates extra built-in" >> $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf >>>> for module in $RPM_BUILD_ROOT/lib/modules/%{kernel}/extra/*.ko >>>> do >>>> modname="$(basename ${module})" >>>> echo "override ${modname%.ko} * extra" >> \ >>>> - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf >>>> + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf >>>> echo "override ${modname%.ko} * weak-updates" >> \ >>>> - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf >>>> + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf >>>> done >>>> %clean >>>> @@ -64,7 +66,7 @@ if [ -x "/sbin/weak-modules" ]; then >>>> for m in openvswitch vport-gre vport-stt vport-geneve \ >>>> vport-lisp vport-vxlan; do >>>> echo "/lib/modules/%{kernel}/extra/$m.ko" >>>> - done | /sbin/weak-modules --add-modules >>>> + done | /sbin/weak-modules --add-kernel >>>> fi >>>> %postun >>>> @@ -76,14 +78,14 @@ if [ "$1" = 0 ]; then # Erase, not upgrade >>>> for m in openvswitch vport-gre vport-stt vport-geneve \ >>>> vport-lisp vport-vxlan; do >>>> echo "/lib/modules/%{kernel}/extra/$m.ko" >>>> - done | /sbin/weak-modules --remove-modules >>>> + done | /sbin/weak-modules --remove-kernel >>>> fi >>>> fi >>>> %files >>>> %defattr(0644,root,root) >>>> /lib/modules/%{kernel}/extra/*.ko >>>> -/etc/depmod.d/kmod-openvswitch.conf >>>> +/etc/depmod.d/01openvswitch.conf >>>> %exclude /lib/modules/%{kernel}/modules.* >>>> %changelog >>>> diff --git a/rhel/openvswitch-kmod-rhel6.spec.in b/rhel/openvswitch-kmod-rhel6.spec.in >>>> index c6e6db5..28c7ce1 100644 >>>> --- a/rhel/openvswitch-kmod-rhel6.spec.in >>>> +++ b/rhel/openvswitch-kmod-rhel6.spec.in >>>> @@ -62,13 +62,15 @@ for flavor in %flavors_to_build ; do >>>> find $INSTALL_MOD_PATH/lib/modules -iname 'modules.*' -exec rm {} \; >>>> done >>>> install -d %{buildroot}%{_sysconfdir}/depmod.d/ >>>> + >>>> +echo "search extra/openvswitch weak-updates/openvswitch updates extra built-in weak-updates" >> 01%{oname}.conf >>>> for module in %{buildroot}/lib/modules/%{kernel_version}/$INSTALL_MOD_DIR/*.ko; >>>> do >>>> modname="$(basename ${module})" >>>> - echo "override ${modname%.ko} * extra/%{oname}" >> %{oname}.conf >>>> - echo "override ${modname%.ko} * weak-updates/%{oname}" >> %{oname}.conf >>>> + echo "override ${modname%.ko} * extra/%{oname}" >> 01%{oname}.conf >>>> + echo "override ${modname%.ko} * weak-updates/%{oname}" >> 01%{oname}.conf >>>> done >>>> -install -m 644 %{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ >>>> +install -m 644 01%{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ >>>> %post >>>> # Ensure that modprobe will find our modules. >>>> @@ -79,7 +81,7 @@ if [ -x "/sbin/weak-modules" ]; then >>>> for m in openvswitch vport-gre vport-stt vport-geneve \ >>>> vport-lisp vport-vxlan; do >>>> echo "/lib/modules/%{kernel}/extra/$m.ko" >>>> - done | /sbin/weak-modules --add-modules >>>> + done | /sbin/weak-modules --add-kernel >>>> fi >>>> %postun >>>> @@ -91,13 +93,13 @@ if [ "$1" = 0 ]; then # Erase, not upgrade >>>> for m in openvswitch vport-gre vport-stt vport-geneve \ >>>> vport-lisp vport-vxlan; do >>>> echo "/lib/modules/%{kernel}/extra/$m.ko" >>>> - done | /sbin/weak-modules --remove-modules >>>> + done | /sbin/weak-modules --remove-kernel >>>> fi >>>> fi >>>> %files >>>> %defattr(644,root,root) >>>> -/etc/depmod.d/%{oname}.conf >>>> +/etc/depmod.d/01%{oname}.conf >>>> %clean >>>> rm -rf $RPM_BUILD_ROOT >>>> diff --git a/rhel/openvswitch-kmod.files b/rhel/openvswitch-kmod.files >>>> index 357c2e8..49262f3 100644 >>>> --- a/rhel/openvswitch-kmod.files >>>> +++ b/rhel/openvswitch-kmod.files >>>> @@ -1,3 +1,3 @@ >>>> %defattr(644,root,root,755) >>>> /lib/modules/%2-%1 >>>> -/etc/depmod.d/openvswitch.conf >>>> +/etc/depmod.d/01openvswitch.conf >>>> -- >>>> 1.8.3.1 >>>> >>>> _______________________________________________ >>>> dev mailing list >>>> dev@openvswitch.org >>>> https://mail.openvswitch.org/mailman/listinfo/ovs-dev >> _______________________________________________ >> dev mailing list >> dev@openvswitch.org >> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
On 1/24/2018 7:23 PM, Greg Rose wrote: > A previous patch added post install and post uninstall scripts which > use the weak-modules utility to make sure that openvswitch kernel > modules are copied to the correct kernel directory. While this > patch did fix some issues there are two remaining issues we have > found. > > 1) In the case where the OS is running kernel X and the openvswitch > kernel modules have been previously installed correctly and are > working without a problem and then updating to Kernel X.1 we find > that the correct openvswitch kernel module no longer loads. > 2) In the case where a kernel module rpm has been built against an > older kernel but installed on a newer kernel then the correct > openvswitch kernel module will not load. > > This patch changes the weak-modules parameter to --add-kernel instead > of --add-modules. This fixes the problem in case 1. In addition > we modify the openvswitch depmod configuration file installed to the > /etc/depmod.d directory and prepend a "01" to the name of the file. > We then insert the first line of the file with a search path that > will find weak-updates first. This change along with the change > to the weak-modules utility parameters fixes the problem in case 2. > > I also modified the kernel module configuration file for both the > rhel6 and rhel7/fedora specs to use a common "01openvswitch.conf" > file name format. > > Cc: Flavio Leitner <fbl@sysclose.org> > Co-authored-by: Gurucharan Shetty <guru@ovn.org> > Signed-off-by: Greg Rose <gvrose8192@gmail.com> Updates on my investigation of this issue had been delayed while I worked a couple of other issues. The previous changes to the rhel kernel module spec files had seemed to work for most cases, except for two outlined above. So I submitted this patch and Flavio suggested some things to check. I returned to investigation of this issue yesterday and have run into something quite strange. For case #1 above the issue no longer occurs since updating to the latest master. I've tried it multiple times and after it is done the correct openvswitch module is loaded: [gvrose@Unknown ~]$ modinfo openvswitch filename: /lib/modules/3.10.0-693.17.1.el7.x86_64/weak-updates/openvswitch.ko alias: net-pf-16-proto-16-family-ovs_packet alias: net-pf-16-proto-16-family-ovs_flow alias: net-pf-16-proto-16-family-ovs_vport alias: net-pf-16-proto-16-family-ovs_datapath version: 2.9.90 license: GPL description: Open vSwitch switching datapath rhelversion: 7.4 srcversion: 97187E4B9FBE7E0C4443597 depends: nf_conntrack,nf_nat,nf_defrag_ipv6,udp_tunnel,libcrc32c,nf_nat_ipv6,nf_nat_ipv4 vermagic: 3.10.0-693.el7.x86_64 SMP mod_unload modversions For case # 2 above it is the same since updating to latest master. I've tried it multiple times but every time it works correctly now and the results show it: [gvrose@Unknown ovs-experimental]$ sudo modinfo openvswitch [sudo] password for gvrose: filename: /lib/modules/3.10.0-693.17.1.el7.x86_64/weak-updates/openvswitch.ko alias: net-pf-16-proto-16-family-ovs_packet alias: net-pf-16-proto-16-family-ovs_flow alias: net-pf-16-proto-16-family-ovs_vport alias: net-pf-16-proto-16-family-ovs_datapath version: 2.9.90 license: GPL description: Open vSwitch switching datapath rhelversion: 7.4 srcversion: 97187E4B9FBE7E0C4443597 depends: nf_conntrack,nf_nat,nf_defrag_ipv6,udp_tunnel,libcrc32c,nf_nat_ipv6,nf_nat_ipv4 vermagic: 3.10.0-693.el7.x86_64 SMP mod_unload modversions I then reverted back to the branch as it existed at the time of the error we were able to reproduce reliably. I can no longer reproduce the error. At all... I'm flummoxed but I've spent most of the last two days working on trying to repro but to no avail. So at this point, no longer being able to repro the error, I have no further patches to provide. If the error is found to be reproducible by anyone then I'll have a look but for now I'm done investigating this issue. Let's abandon this patch until I can find a reproducer. I have other things I need to work on. - Greg > --- > rhel/openvswitch-kmod-fedora.spec.in | 12 +++++++----- > rhel/openvswitch-kmod-rhel6.spec.in | 14 ++++++++------ > rhel/openvswitch-kmod.files | 2 +- > 3 files changed, 16 insertions(+), 12 deletions(-) > > diff --git a/rhel/openvswitch-kmod-fedora.spec.in b/rhel/openvswitch-kmod-fedora.spec.in > index c0cd298..ae3a4d8 100644 > --- a/rhel/openvswitch-kmod-fedora.spec.in > +++ b/rhel/openvswitch-kmod-fedora.spec.in > @@ -43,13 +43,15 @@ make %{_smp_mflags} -C datapath/linux > rm -rf $RPM_BUILD_ROOT > make INSTALL_MOD_PATH=$RPM_BUILD_ROOT -C datapath/linux modules_install > mkdir -p $RPM_BUILD_ROOT/etc/depmod.d > + > +echo "search weak-updates updates extra built-in" >> $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf > for module in $RPM_BUILD_ROOT/lib/modules/%{kernel}/extra/*.ko > do > modname="$(basename ${module})" > echo "override ${modname%.ko} * extra" >> \ > - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf > + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf > echo "override ${modname%.ko} * weak-updates" >> \ > - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf > + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf > done > > %clean > @@ -64,7 +66,7 @@ if [ -x "/sbin/weak-modules" ]; then > for m in openvswitch vport-gre vport-stt vport-geneve \ > vport-lisp vport-vxlan; do > echo "/lib/modules/%{kernel}/extra/$m.ko" > - done | /sbin/weak-modules --add-modules > + done | /sbin/weak-modules --add-kernel > fi > > %postun > @@ -76,14 +78,14 @@ if [ "$1" = 0 ]; then # Erase, not upgrade > for m in openvswitch vport-gre vport-stt vport-geneve \ > vport-lisp vport-vxlan; do > echo "/lib/modules/%{kernel}/extra/$m.ko" > - done | /sbin/weak-modules --remove-modules > + done | /sbin/weak-modules --remove-kernel > fi > fi > > %files > %defattr(0644,root,root) > /lib/modules/%{kernel}/extra/*.ko > -/etc/depmod.d/kmod-openvswitch.conf > +/etc/depmod.d/01openvswitch.conf > %exclude /lib/modules/%{kernel}/modules.* > > %changelog > diff --git a/rhel/openvswitch-kmod-rhel6.spec.in b/rhel/openvswitch-kmod-rhel6.spec.in > index c6e6db5..28c7ce1 100644 > --- a/rhel/openvswitch-kmod-rhel6.spec.in > +++ b/rhel/openvswitch-kmod-rhel6.spec.in > @@ -62,13 +62,15 @@ for flavor in %flavors_to_build ; do > find $INSTALL_MOD_PATH/lib/modules -iname 'modules.*' -exec rm {} \; > done > install -d %{buildroot}%{_sysconfdir}/depmod.d/ > + > +echo "search extra/openvswitch weak-updates/openvswitch updates extra built-in weak-updates" >> 01%{oname}.conf > for module in %{buildroot}/lib/modules/%{kernel_version}/$INSTALL_MOD_DIR/*.ko; > do > modname="$(basename ${module})" > - echo "override ${modname%.ko} * extra/%{oname}" >> %{oname}.conf > - echo "override ${modname%.ko} * weak-updates/%{oname}" >> %{oname}.conf > + echo "override ${modname%.ko} * extra/%{oname}" >> 01%{oname}.conf > + echo "override ${modname%.ko} * weak-updates/%{oname}" >> 01%{oname}.conf > done > -install -m 644 %{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ > +install -m 644 01%{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ > > %post > # Ensure that modprobe will find our modules. > @@ -79,7 +81,7 @@ if [ -x "/sbin/weak-modules" ]; then > for m in openvswitch vport-gre vport-stt vport-geneve \ > vport-lisp vport-vxlan; do > echo "/lib/modules/%{kernel}/extra/$m.ko" > - done | /sbin/weak-modules --add-modules > + done | /sbin/weak-modules --add-kernel > fi > > %postun > @@ -91,13 +93,13 @@ if [ "$1" = 0 ]; then # Erase, not upgrade > for m in openvswitch vport-gre vport-stt vport-geneve \ > vport-lisp vport-vxlan; do > echo "/lib/modules/%{kernel}/extra/$m.ko" > - done | /sbin/weak-modules --remove-modules > + done | /sbin/weak-modules --remove-kernel > fi > fi > > %files > %defattr(644,root,root) > -/etc/depmod.d/%{oname}.conf > +/etc/depmod.d/01%{oname}.conf > > %clean > rm -rf $RPM_BUILD_ROOT > diff --git a/rhel/openvswitch-kmod.files b/rhel/openvswitch-kmod.files > index 357c2e8..49262f3 100644 > --- a/rhel/openvswitch-kmod.files > +++ b/rhel/openvswitch-kmod.files > @@ -1,3 +1,3 @@ > %defattr(644,root,root,755) > /lib/modules/%2-%1 > -/etc/depmod.d/openvswitch.conf > +/etc/depmod.d/01openvswitch.conf
diff --git a/rhel/openvswitch-kmod-fedora.spec.in b/rhel/openvswitch-kmod-fedora.spec.in index c0cd298..ae3a4d8 100644 --- a/rhel/openvswitch-kmod-fedora.spec.in +++ b/rhel/openvswitch-kmod-fedora.spec.in @@ -43,13 +43,15 @@ make %{_smp_mflags} -C datapath/linux rm -rf $RPM_BUILD_ROOT make INSTALL_MOD_PATH=$RPM_BUILD_ROOT -C datapath/linux modules_install mkdir -p $RPM_BUILD_ROOT/etc/depmod.d + +echo "search weak-updates updates extra built-in" >> $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf for module in $RPM_BUILD_ROOT/lib/modules/%{kernel}/extra/*.ko do modname="$(basename ${module})" echo "override ${modname%.ko} * extra" >> \ - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf echo "override ${modname%.ko} * weak-updates" >> \ - $RPM_BUILD_ROOT/etc/depmod.d/kmod-openvswitch.conf + $RPM_BUILD_ROOT/etc/depmod.d/01openvswitch.conf done %clean @@ -64,7 +66,7 @@ if [ -x "/sbin/weak-modules" ]; then for m in openvswitch vport-gre vport-stt vport-geneve \ vport-lisp vport-vxlan; do echo "/lib/modules/%{kernel}/extra/$m.ko" - done | /sbin/weak-modules --add-modules + done | /sbin/weak-modules --add-kernel fi %postun @@ -76,14 +78,14 @@ if [ "$1" = 0 ]; then # Erase, not upgrade for m in openvswitch vport-gre vport-stt vport-geneve \ vport-lisp vport-vxlan; do echo "/lib/modules/%{kernel}/extra/$m.ko" - done | /sbin/weak-modules --remove-modules + done | /sbin/weak-modules --remove-kernel fi fi %files %defattr(0644,root,root) /lib/modules/%{kernel}/extra/*.ko -/etc/depmod.d/kmod-openvswitch.conf +/etc/depmod.d/01openvswitch.conf %exclude /lib/modules/%{kernel}/modules.* %changelog diff --git a/rhel/openvswitch-kmod-rhel6.spec.in b/rhel/openvswitch-kmod-rhel6.spec.in index c6e6db5..28c7ce1 100644 --- a/rhel/openvswitch-kmod-rhel6.spec.in +++ b/rhel/openvswitch-kmod-rhel6.spec.in @@ -62,13 +62,15 @@ for flavor in %flavors_to_build ; do find $INSTALL_MOD_PATH/lib/modules -iname 'modules.*' -exec rm {} \; done install -d %{buildroot}%{_sysconfdir}/depmod.d/ + +echo "search extra/openvswitch weak-updates/openvswitch updates extra built-in weak-updates" >> 01%{oname}.conf for module in %{buildroot}/lib/modules/%{kernel_version}/$INSTALL_MOD_DIR/*.ko; do modname="$(basename ${module})" - echo "override ${modname%.ko} * extra/%{oname}" >> %{oname}.conf - echo "override ${modname%.ko} * weak-updates/%{oname}" >> %{oname}.conf + echo "override ${modname%.ko} * extra/%{oname}" >> 01%{oname}.conf + echo "override ${modname%.ko} * weak-updates/%{oname}" >> 01%{oname}.conf done -install -m 644 %{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ +install -m 644 01%{oname}.conf %{buildroot}%{_sysconfdir}/depmod.d/ %post # Ensure that modprobe will find our modules. @@ -79,7 +81,7 @@ if [ -x "/sbin/weak-modules" ]; then for m in openvswitch vport-gre vport-stt vport-geneve \ vport-lisp vport-vxlan; do echo "/lib/modules/%{kernel}/extra/$m.ko" - done | /sbin/weak-modules --add-modules + done | /sbin/weak-modules --add-kernel fi %postun @@ -91,13 +93,13 @@ if [ "$1" = 0 ]; then # Erase, not upgrade for m in openvswitch vport-gre vport-stt vport-geneve \ vport-lisp vport-vxlan; do echo "/lib/modules/%{kernel}/extra/$m.ko" - done | /sbin/weak-modules --remove-modules + done | /sbin/weak-modules --remove-kernel fi fi %files %defattr(644,root,root) -/etc/depmod.d/%{oname}.conf +/etc/depmod.d/01%{oname}.conf %clean rm -rf $RPM_BUILD_ROOT diff --git a/rhel/openvswitch-kmod.files b/rhel/openvswitch-kmod.files index 357c2e8..49262f3 100644 --- a/rhel/openvswitch-kmod.files +++ b/rhel/openvswitch-kmod.files @@ -1,3 +1,3 @@ %defattr(644,root,root,755) /lib/modules/%2-%1 -/etc/depmod.d/openvswitch.conf +/etc/depmod.d/01openvswitch.conf
A previous patch added post install and post uninstall scripts which use the weak-modules utility to make sure that openvswitch kernel modules are copied to the correct kernel directory. While this patch did fix some issues there are two remaining issues we have found. 1) In the case where the OS is running kernel X and the openvswitch kernel modules have been previously installed correctly and are working without a problem and then updating to Kernel X.1 we find that the correct openvswitch kernel module no longer loads. 2) In the case where a kernel module rpm has been built against an older kernel but installed on a newer kernel then the correct openvswitch kernel module will not load. This patch changes the weak-modules parameter to --add-kernel instead of --add-modules. This fixes the problem in case 1. In addition we modify the openvswitch depmod configuration file installed to the /etc/depmod.d directory and prepend a "01" to the name of the file. We then insert the first line of the file with a search path that will find weak-updates first. This change along with the change to the weak-modules utility parameters fixes the problem in case 2. I also modified the kernel module configuration file for both the rhel6 and rhel7/fedora specs to use a common "01openvswitch.conf" file name format. Cc: Flavio Leitner <fbl@sysclose.org> Co-authored-by: Gurucharan Shetty <guru@ovn.org> Signed-off-by: Greg Rose <gvrose8192@gmail.com> --- rhel/openvswitch-kmod-fedora.spec.in | 12 +++++++----- rhel/openvswitch-kmod-rhel6.spec.in | 14 ++++++++------ rhel/openvswitch-kmod.files | 2 +- 3 files changed, 16 insertions(+), 12 deletions(-)