Message ID | 1510677027-24076-1-git-send-email-giulio.benetti@micronovasrl.com |
---|---|
State | Rejected |
Headers | show |
Series | [1/1] qt5cinex: depends also on qt5quickcontrols | expand |
Hi Giulio, On Tue, Nov 14, 2017 at 05:32:26PM +0100, Giulio Benetti wrote: > Errata: > > Il 14/11/2017 17:30, Giulio Benetti ha scritto: > > qt5cinex failed to build if qt5quickcontrols is not selected > qt5cinex fail to execute on runtime if qt5quickcontrols is not selected If it's a runtime only dependency you should not list it in _DEPENDENCIES ... > > add qt5quickcontrols to qt5cinex dependencies in .mk > > select BR2_PACKAGE_QT5QUICKCONTROLS in Config.in > > > > Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> > > --- > > package/qt5cinex/Config.in | 1 + > > package/qt5cinex/qt5cinex.mk | 2 +- > > 2 files changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/package/qt5cinex/Config.in b/package/qt5cinex/Config.in > > index 5adf6c3..7cc459a 100644 > > --- a/package/qt5cinex/Config.in > > +++ b/package/qt5cinex/Config.in > > @@ -16,6 +16,7 @@ config BR2_PACKAGE_QT5CINEX > > select BR2_PACKAGE_QT5BASE_WIDGETS > > select BR2_PACKAGE_QT5BASE_EGLFS > > select BR2_PACKAGE_QT5GRAPHICALEFFECTS > > + select BR2_PACKAGE_QT5QUICKCONTROLS ... but you should add a 'runtime' comment here. > > help > > This application demonstrates the power of Qt5 and few of the new > > additions available in QtQuick 2.0. > > diff --git a/package/qt5cinex/qt5cinex.mk b/package/qt5cinex/qt5cinex.mk > > index d9254f5..44c53a1 100644 > > --- a/package/qt5cinex/qt5cinex.mk > > +++ b/package/qt5cinex/qt5cinex.mk > > @@ -12,7 +12,7 @@ QT5CINEX_HD = "rpi_" > > endif > > QT5CINEX_SOURCE = Qt5_CinematicExperience_$(QT5CINEX_HD)$(QT5CINEX_VERSION).tgz > > -QT5CINEX_DEPENDENCIES = qt5base qt5declarative > > +QT5CINEX_DEPENDENCIES = qt5base qt5declarative qt5quickcontrols > > QT5CINEX_LICENSE = CC-BY-3.0 > > QT5CINEX_LICENSE_FILES = README baruch
Sorry, my mistake. It installed correctly on STAGING_DIR, but not in TARGET_DIR. This why it compiled fine, but on target it didn't find that libQtQuick.so library. This is a problem on building Qt5 I've noticed. If I build first time Qt5 with few features, than select other more features, those can be built partially and installed partially too. To reproduce you can build qt5base. After that, select qt5cinex, then you should find that libraries are in STAGING_DIR but not in TARGET_DIR. So to have it working properly you have to rm and rebuild qt5base and qt5declarative from beginning. Did someone else noticed this? Il 14/11/2017 17:58, Baruch Siach ha scritto: > Hi Giulio, > > On Tue, Nov 14, 2017 at 05:32:26PM +0100, Giulio Benetti wrote: >> Errata: >> >> Il 14/11/2017 17:30, Giulio Benetti ha scritto: >>> qt5cinex failed to build if qt5quickcontrols is not selected >> qt5cinex fail to execute on runtime if qt5quickcontrols is not selected > > If it's a runtime only dependency you should not list it in _DEPENDENCIES ... > >>> add qt5quickcontrols to qt5cinex dependencies in .mk >>> select BR2_PACKAGE_QT5QUICKCONTROLS in Config.in >>> >>> Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> >>> --- >>> package/qt5cinex/Config.in | 1 + >>> package/qt5cinex/qt5cinex.mk | 2 +- >>> 2 files changed, 2 insertions(+), 1 deletion(-) >>> >>> diff --git a/package/qt5cinex/Config.in b/package/qt5cinex/Config.in >>> index 5adf6c3..7cc459a 100644 >>> --- a/package/qt5cinex/Config.in >>> +++ b/package/qt5cinex/Config.in >>> @@ -16,6 +16,7 @@ config BR2_PACKAGE_QT5CINEX >>> select BR2_PACKAGE_QT5BASE_WIDGETS >>> select BR2_PACKAGE_QT5BASE_EGLFS >>> select BR2_PACKAGE_QT5GRAPHICALEFFECTS >>> + select BR2_PACKAGE_QT5QUICKCONTROLS > > ... but you should add a 'runtime' comment here. > >>> help >>> This application demonstrates the power of Qt5 and few of the new >>> additions available in QtQuick 2.0. >>> diff --git a/package/qt5cinex/qt5cinex.mk b/package/qt5cinex/qt5cinex.mk >>> index d9254f5..44c53a1 100644 >>> --- a/package/qt5cinex/qt5cinex.mk >>> +++ b/package/qt5cinex/qt5cinex.mk >>> @@ -12,7 +12,7 @@ QT5CINEX_HD = "rpi_" >>> endif >>> QT5CINEX_SOURCE = Qt5_CinematicExperience_$(QT5CINEX_HD)$(QT5CINEX_VERSION).tgz >>> -QT5CINEX_DEPENDENCIES = qt5base qt5declarative >>> +QT5CINEX_DEPENDENCIES = qt5base qt5declarative qt5quickcontrols >>> QT5CINEX_LICENSE = CC-BY-3.0 >>> QT5CINEX_LICENSE_FILES = README > > baruch >
Hi Giulio, On Tue, Nov 14, 2017 at 06:03:53PM +0100, Giulio Benetti wrote: > Sorry, my mistake. > It installed correctly on STAGING_DIR, but not in TARGET_DIR. > This why it compiled fine, but on target it didn't find that libQtQuick.so > library. > This is a problem on building Qt5 I've noticed. > > If I build first time Qt5 with few features, > than select other more features, > those can be built partially and installed partially too. > > To reproduce you can build qt5base. > After that, select qt5cinex, > then you should find that libraries are in STAGING_DIR but not in > TARGET_DIR. > > So to have it working properly you have to rm and rebuild qt5base and > qt5declarative from beginning. > > Did someone else noticed this? Buildroot can't reliably rebuild reverse dependencies of packages that change configuration. This is a known issue. See the manual section: http://nightly.buildroot.org/manual.html#full-rebuild baruch > Il 14/11/2017 17:58, Baruch Siach ha scritto: > > On Tue, Nov 14, 2017 at 05:32:26PM +0100, Giulio Benetti wrote: > > > Errata: > > > > > > Il 14/11/2017 17:30, Giulio Benetti ha scritto: > > > > qt5cinex failed to build if qt5quickcontrols is not selected > > > qt5cinex fail to execute on runtime if qt5quickcontrols is not selected > > > > If it's a runtime only dependency you should not list it in _DEPENDENCIES ... > > > > > > add qt5quickcontrols to qt5cinex dependencies in .mk > > > > select BR2_PACKAGE_QT5QUICKCONTROLS in Config.in > > > > > > > > Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> > > > > --- > > > > package/qt5cinex/Config.in | 1 + > > > > package/qt5cinex/qt5cinex.mk | 2 +- > > > > 2 files changed, 2 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/package/qt5cinex/Config.in b/package/qt5cinex/Config.in > > > > index 5adf6c3..7cc459a 100644 > > > > --- a/package/qt5cinex/Config.in > > > > +++ b/package/qt5cinex/Config.in > > > > @@ -16,6 +16,7 @@ config BR2_PACKAGE_QT5CINEX > > > > select BR2_PACKAGE_QT5BASE_WIDGETS > > > > select BR2_PACKAGE_QT5BASE_EGLFS > > > > select BR2_PACKAGE_QT5GRAPHICALEFFECTS > > > > + select BR2_PACKAGE_QT5QUICKCONTROLS > > > > ... but you should add a 'runtime' comment here. > > > > > > help > > > > This application demonstrates the power of Qt5 and few of the new > > > > additions available in QtQuick 2.0. > > > > diff --git a/package/qt5cinex/qt5cinex.mk b/package/qt5cinex/qt5cinex.mk > > > > index d9254f5..44c53a1 100644 > > > > --- a/package/qt5cinex/qt5cinex.mk > > > > +++ b/package/qt5cinex/qt5cinex.mk > > > > @@ -12,7 +12,7 @@ QT5CINEX_HD = "rpi_" > > > > endif > > > > QT5CINEX_SOURCE = Qt5_CinematicExperience_$(QT5CINEX_HD)$(QT5CINEX_VERSION).tgz > > > > -QT5CINEX_DEPENDENCIES = qt5base qt5declarative > > > > +QT5CINEX_DEPENDENCIES = qt5base qt5declarative qt5quickcontrols > > > > QT5CINEX_LICENSE = CC-BY-3.0 > > > > QT5CINEX_LICENSE_FILES = README > > > > baruch > > > > > -- > Giulio Benetti > R&D Manager & > Advanced Research > > MICRONOVA SRL > Sede: Via A. Niedda 3 - 35010 Vigonza (PD) > Tel. 049/8931563 - Fax 049/8931346 > Cod.Fiscale - P.IVA 02663420285 > Capitale Sociale € 26.000 i.v. > Iscritta al Reg. Imprese di Padova N. 02663420285 > Numero R.E.A. 258642
Hi, Il 14/11/2017 18:07, Baruch Siach ha scritto: > Hi Giulio, > > On Tue, Nov 14, 2017 at 06:03:53PM +0100, Giulio Benetti wrote: >> Sorry, my mistake. >> It installed correctly on STAGING_DIR, but not in TARGET_DIR. >> This why it compiled fine, but on target it didn't find that libQtQuick.so >> library. >> This is a problem on building Qt5 I've noticed. >> >> If I build first time Qt5 with few features, >> than select other more features, >> those can be built partially and installed partially too. >> >> To reproduce you can build qt5base. >> After that, select qt5cinex, >> then you should find that libraries are in STAGING_DIR but not in >> TARGET_DIR. >> >> So to have it working properly you have to rm and rebuild qt5base and >> qt5declarative from beginning. >> >> Did someone else noticed this? > > Buildroot can't reliably rebuild reverse dependencies of packages that change > configuration. This is a known issue. See the manual section: > > http://nightly.buildroot.org/manual.html#full-rebuild Ok, thank you and sorry to rise useless question. > > baruch > >> Il 14/11/2017 17:58, Baruch Siach ha scritto: >>> On Tue, Nov 14, 2017 at 05:32:26PM +0100, Giulio Benetti wrote: >>>> Errata: >>>> >>>> Il 14/11/2017 17:30, Giulio Benetti ha scritto: >>>>> qt5cinex failed to build if qt5quickcontrols is not selected >>>> qt5cinex fail to execute on runtime if qt5quickcontrols is not selected >>> >>> If it's a runtime only dependency you should not list it in _DEPENDENCIES ... >>> >>>>> add qt5quickcontrols to qt5cinex dependencies in .mk >>>>> select BR2_PACKAGE_QT5QUICKCONTROLS in Config.in >>>>> >>>>> Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> >>>>> --- >>>>> package/qt5cinex/Config.in | 1 + >>>>> package/qt5cinex/qt5cinex.mk | 2 +- >>>>> 2 files changed, 2 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/package/qt5cinex/Config.in b/package/qt5cinex/Config.in >>>>> index 5adf6c3..7cc459a 100644 >>>>> --- a/package/qt5cinex/Config.in >>>>> +++ b/package/qt5cinex/Config.in >>>>> @@ -16,6 +16,7 @@ config BR2_PACKAGE_QT5CINEX >>>>> select BR2_PACKAGE_QT5BASE_WIDGETS >>>>> select BR2_PACKAGE_QT5BASE_EGLFS >>>>> select BR2_PACKAGE_QT5GRAPHICALEFFECTS >>>>> + select BR2_PACKAGE_QT5QUICKCONTROLS >>> >>> ... but you should add a 'runtime' comment here. >>> >>>>> help >>>>> This application demonstrates the power of Qt5 and few of the new >>>>> additions available in QtQuick 2.0. >>>>> diff --git a/package/qt5cinex/qt5cinex.mk b/package/qt5cinex/qt5cinex.mk >>>>> index d9254f5..44c53a1 100644 >>>>> --- a/package/qt5cinex/qt5cinex.mk >>>>> +++ b/package/qt5cinex/qt5cinex.mk >>>>> @@ -12,7 +12,7 @@ QT5CINEX_HD = "rpi_" >>>>> endif >>>>> QT5CINEX_SOURCE = Qt5_CinematicExperience_$(QT5CINEX_HD)$(QT5CINEX_VERSION).tgz >>>>> -QT5CINEX_DEPENDENCIES = qt5base qt5declarative >>>>> +QT5CINEX_DEPENDENCIES = qt5base qt5declarative qt5quickcontrols >>>>> QT5CINEX_LICENSE = CC-BY-3.0 >>>>> QT5CINEX_LICENSE_FILES = README >>> >>> baruch >>> >> >> >> -- >> Giulio Benetti >> R&D Manager & >> Advanced Research >> >> MICRONOVA SRL >> Sede: Via A. Niedda 3 - 35010 Vigonza (PD) >> Tel. 049/8931563 - Fax 049/8931346 >> Cod.Fiscale - P.IVA 02663420285 >> Capitale Sociale € 26.000 i.v. >> Iscritta al Reg. Imprese di Padova N. 02663420285 >> Numero R.E.A. 258642 >
Hello, On Tue, 14 Nov 2017 18:03:53 +0100, Giulio Benetti wrote: > Sorry, my mistake. > It installed correctly on STAGING_DIR, but not in TARGET_DIR. > This why it compiled fine, but on target it didn't find that > libQtQuick.so library. > This is a problem on building Qt5 I've noticed. > > If I build first time Qt5 with few features, > than select other more features, > those can be built partially and installed partially too. > > To reproduce you can build qt5base. > After that, select qt5cinex, > then you should find that libraries are in STAGING_DIR but not in > TARGET_DIR. > > So to have it working properly you have to rm and rebuild qt5base and > qt5declarative from beginning. > > Did someone else noticed this? So in the end, is your patch needed ? Peter (Seiderer), could you review this Qt5 related patch ? Thanks! Best regards, Thomas
Hi Thomas, Il 23/11/2017 21:45, Thomas Petazzoni ha scritto: > Hello, > > On Tue, 14 Nov 2017 18:03:53 +0100, Giulio Benetti wrote: >> Sorry, my mistake. >> It installed correctly on STAGING_DIR, but not in TARGET_DIR. >> This why it compiled fine, but on target it didn't find that >> libQtQuick.so library. >> This is a problem on building Qt5 I've noticed. >> >> If I build first time Qt5 with few features, >> than select other more features, >> those can be built partially and installed partially too. >> >> To reproduce you can build qt5base. >> After that, select qt5cinex, >> then you should find that libraries are in STAGING_DIR but not in >> TARGET_DIR. >> >> So to have it working properly you have to rm and rebuild qt5base and >> qt5declarative from beginning. >> >> Did someone else noticed this? > > So in the end, is your patch needed ? No it's not needed, my fault, sorry. > > Peter (Seiderer), could you review this Qt5 related patch ? Thanks! > > Best regards, > > Thomas >
Hello *, On Thu, 23 Nov 2017 21:45:46 +0100, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > Hello, > > On Tue, 14 Nov 2017 18:03:53 +0100, Giulio Benetti wrote: > > Sorry, my mistake. > > It installed correctly on STAGING_DIR, but not in TARGET_DIR. > > This why it compiled fine, but on target it didn't find that > > libQtQuick.so library. > > This is a problem on building Qt5 I've noticed. > > > > If I build first time Qt5 with few features, > > than select other more features, > > those can be built partially and installed partially too. > > > > To reproduce you can build qt5base. > > After that, select qt5cinex, > > then you should find that libraries are in STAGING_DIR but not in > > TARGET_DIR. > > > > So to have it working properly you have to rm and rebuild qt5base and > > qt5declarative from beginning. > > > > Did someone else noticed this? > > So in the end, is your patch needed ? > > Peter (Seiderer), could you review this Qt5 related patch ? Thanks! No qml expert, but a quick search for 'import QtQuick.Controls' (needed for usage of qt5quickcontrols) did not yield any results: $ wget http://quitcoding.com/download/Qt5_CinematicExperience_rpi_1.0.tgz $ wget http://quitcoding.com/download/Qt5_CinematicExperience_1.0.tgz $ tar -xvzf Qt5_CinematicExperience_1.0.tgz $ tar -xvzf Qt5_CinematicExperience_rpi_1.0.tgz $ find . -name "*.qml" | xargs grep import ./Qt5_CinematicExperience_1.0/content/CurtainEffect.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/InfoView.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/Switch.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/Switch.qml:import QtQuick.Particles 2.0 ./Qt5_CinematicExperience_1.0/content/DetailsView.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/InfoViewItem.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/Background.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/Background.qml:import QtQuick.Particles 2.0 ./Qt5_CinematicExperience_1.0/content/RatingsItem.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/DelegateItem.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/MoviesModel.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/SettingsView.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/MainView.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/MainView.qml:import QtQuick.Particles 2.0 ./Qt5_CinematicExperience_1.0/content/MainView.qml:import QtGraphicalEffects 1.0 ./Qt5_CinematicExperience_1.0/content/Button.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/content/Button.qml:import QtQuick.Particles 2.0 ./Qt5_CinematicExperience_1.0/Qt5_CinematicExperience.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_1.0/Qt5_CinematicExperience.qml:import "content" ./Qt5_CinematicExperience_rpi_1.0/content/CurtainEffect.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/InfoView.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/Switch.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/Switch.qml:import QtQuick.Particles 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/DetailsView.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/InfoViewItem.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/Background.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/Background.qml:import QtQuick.Particles 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/RatingsItem.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/FpsItem.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/DelegateItem.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/MoviesModel.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/SettingsView.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/MainView.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/MainView.qml:import QtQuick.Particles 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/MainView.qml:import QtGraphicalEffects 1.0 ./Qt5_CinematicExperience_rpi_1.0/content/Button.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/content/Button.qml:import QtQuick.Particles 2.0 ./Qt5_CinematicExperience_rpi_1.0/Qt5_CinematicExperience.qml:import QtQuick 2.0 ./Qt5_CinematicExperience_rpi_1.0/Qt5_CinematicExperience.qml:import "content" >>> qt5cinex fail to execute on runtime if qt5quickcontrols is not selected Did not do a runtime test, but what is the error message (if any)? Regards, Peter > > Best regards, > > Thomas
Hello everybody, Il 23/11/2017 22:28, Peter Seiderer ha scritto: > Hello *, > > On Thu, 23 Nov 2017 21:45:46 +0100, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > >> Hello, >> >> On Tue, 14 Nov 2017 18:03:53 +0100, Giulio Benetti wrote: >>> Sorry, my mistake. >>> It installed correctly on STAGING_DIR, but not in TARGET_DIR. >>> This why it compiled fine, but on target it didn't find that >>> libQtQuick.so library. >>> This is a problem on building Qt5 I've noticed. >>> >>> If I build first time Qt5 with few features, >>> than select other more features, >>> those can be built partially and installed partially too. >>> >>> To reproduce you can build qt5base. >>> After that, select qt5cinex, >>> then you should find that libraries are in STAGING_DIR but not in >>> TARGET_DIR. >>> >>> So to have it working properly you have to rm and rebuild qt5base and >>> qt5declarative from beginning. >>> >>> Did someone else noticed this? >> >> So in the end, is your patch needed ? >> >> Peter (Seiderer), could you review this Qt5 related patch ? Thanks! > > No qml expert, but a quick search for 'import QtQuick.Controls' (needed for usage of qt5quickcontrols) did > not yield any results: > > $ wget http://quitcoding.com/download/Qt5_CinematicExperience_rpi_1.0.tgz > $ wget http://quitcoding.com/download/Qt5_CinematicExperience_1.0.tgz > $ tar -xvzf Qt5_CinematicExperience_1.0.tgz > $ tar -xvzf Qt5_CinematicExperience_rpi_1.0.tgz > $ find . -name "*.qml" | xargs grep import > > ./Qt5_CinematicExperience_1.0/content/CurtainEffect.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/InfoView.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/Switch.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/Switch.qml:import QtQuick.Particles 2.0 > ./Qt5_CinematicExperience_1.0/content/DetailsView.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/InfoViewItem.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/Background.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/Background.qml:import QtQuick.Particles 2.0 > ./Qt5_CinematicExperience_1.0/content/RatingsItem.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/DelegateItem.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/MoviesModel.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/SettingsView.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/MainView.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/MainView.qml:import QtQuick.Particles 2.0 > ./Qt5_CinematicExperience_1.0/content/MainView.qml:import QtGraphicalEffects 1.0 > ./Qt5_CinematicExperience_1.0/content/Button.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/content/Button.qml:import QtQuick.Particles 2.0 > ./Qt5_CinematicExperience_1.0/Qt5_CinematicExperience.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_1.0/Qt5_CinematicExperience.qml:import "content" > ./Qt5_CinematicExperience_rpi_1.0/content/CurtainEffect.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/InfoView.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/Switch.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/Switch.qml:import QtQuick.Particles 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/DetailsView.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/InfoViewItem.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/Background.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/Background.qml:import QtQuick.Particles 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/RatingsItem.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/FpsItem.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/DelegateItem.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/MoviesModel.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/SettingsView.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/MainView.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/MainView.qml:import QtQuick.Particles 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/MainView.qml:import QtGraphicalEffects 1.0 > ./Qt5_CinematicExperience_rpi_1.0/content/Button.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/content/Button.qml:import QtQuick.Particles 2.0 > ./Qt5_CinematicExperience_rpi_1.0/Qt5_CinematicExperience.qml:import QtQuick 2.0 > ./Qt5_CinematicExperience_rpi_1.0/Qt5_CinematicExperience.qml:import "content" > Peter you're right. My mistake was: - building all buildroot with only qt5base - modifying .config enabling qt5cinex which selects qt5declarative - giving another make(not building from scratch) So I ended up having qt5base not aware of qt5declarative when installing qml modules. At this point I rebuilt from scratch adding qt5quickcontrols to .config(mistake, don't why I thought it), and it worked. So I thought qt5quickcontrols was missing. Instead qt5quickcontrols is not necessary, and selecting qt5cinex did its job selecting correctly qt5declarative. This is all the story about this useless patch. >>>> qt5cinex fail to execute on runtime if qt5quickcontrols is not selected > > Did not do a runtime test, but what is the error message (if any)? > > Regards, > Peter > >> >> Best regards, >> >> Thomas >
diff --git a/package/qt5cinex/Config.in b/package/qt5cinex/Config.in index 5adf6c3..7cc459a 100644 --- a/package/qt5cinex/Config.in +++ b/package/qt5cinex/Config.in @@ -16,6 +16,7 @@ config BR2_PACKAGE_QT5CINEX select BR2_PACKAGE_QT5BASE_WIDGETS select BR2_PACKAGE_QT5BASE_EGLFS select BR2_PACKAGE_QT5GRAPHICALEFFECTS + select BR2_PACKAGE_QT5QUICKCONTROLS help This application demonstrates the power of Qt5 and few of the new additions available in QtQuick 2.0. diff --git a/package/qt5cinex/qt5cinex.mk b/package/qt5cinex/qt5cinex.mk index d9254f5..44c53a1 100644 --- a/package/qt5cinex/qt5cinex.mk +++ b/package/qt5cinex/qt5cinex.mk @@ -12,7 +12,7 @@ QT5CINEX_HD = "rpi_" endif QT5CINEX_SOURCE = Qt5_CinematicExperience_$(QT5CINEX_HD)$(QT5CINEX_VERSION).tgz -QT5CINEX_DEPENDENCIES = qt5base qt5declarative +QT5CINEX_DEPENDENCIES = qt5base qt5declarative qt5quickcontrols QT5CINEX_LICENSE = CC-BY-3.0 QT5CINEX_LICENSE_FILES = README
qt5cinex failed to build if qt5quickcontrols is not selected add qt5quickcontrols to qt5cinex dependencies in .mk select BR2_PACKAGE_QT5QUICKCONTROLS in Config.in Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> --- package/qt5cinex/Config.in | 1 + package/qt5cinex/qt5cinex.mk | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)