@@ -27,6 +27,12 @@ config SPL_SPI_SUPPORT
config SPL_WATCHDOG_SUPPORT
default y
+config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+ default y
+
+config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
+ default 0xa2
+
config TARGET_SOCFPGA_ARRIA5
bool
select TARGET_SOCFPGA_GEN5
@@ -96,6 +96,22 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
Address on the MMC to load U-Boot from, when the MMC is being used
in raw mode. Units: MMC sectors (1 sector = 512 bytes).
+config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+ bool "MMC raw mode: by partition type"
+ depends on SPL && DOS_PARTITION && \
+ SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+ help
+ Use partition type for specifying U-Boot partition on MMC/SD in
+ raw mode. U-Boot will be loaded from the first partition of this
+ type to be found.
+
+config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE
+ hex "Partition Type on the MMC to load U-Boot from"
+ depends on SPL && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+ help
+ Partition Type on the MMC to load U-Boot from, when the MMC is being
+ used in raw mode.
+
config TPL
bool
depends on SPL && SUPPORT_TPL
@@ -157,6 +157,21 @@ static int mmc_load_image_raw_partition(struct spl_image_info *spl_image,
disk_partition_t info;
int err;
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+ int type_part;
+ /* Only support MBR so DOS_ENTRY_NUMBERS */
+ for (type_part = 1; type_part <= DOS_ENTRY_NUMBERS; type_part++) {
+ err = part_get_info(mmc_get_blk_desc(mmc), type_part, &info);
+ if (err)
+ continue;
+ if (info.sys_ind ==
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE) {
+ partition = type_part;
+ break;
+ }
+ }
+#endif
+
err = part_get_info(mmc_get_blk_desc(mmc), partition, &info);
if (err) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -217,6 +217,7 @@ static int part_get_info_extended(struct blk_desc *dev_desc,
#if CONFIG_IS_ENABLED(PARTITION_UUIDS)
sprintf(info->uuid, "%08x-%02x", disksig, part_num);
#endif
+ info->sys_ind = pt->sys_ind;
return 0;
}
@@ -59,6 +59,9 @@ typedef struct disk_partition {
#ifdef CONFIG_PARTITION_TYPE_GUID
char type_guid[37]; /* type GUID as string, if exists */
#endif
+#ifdef CONFIG_DOS_PARTITION
+ uchar sys_ind; /* partition type */
+#endif
} disk_partition_t;
/* Misc _get_dev functions */
the socfpga bootrom supports mmc booting from either a raw image starting at 0x0, or from a partition of type 0xa2. This patch adds support for locating the boot image in the first type 0xa2 partition found. Assigned a partition number of -1 will cause a search for a partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE and use it to find the u-boot image Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> -- Changes in v9: - Missed moving use partition type to socfpga/Kconfig Changes in v8: - Move partition type default to arch/arm/mach-socfpga/Kconfig Changes in v7: - set part type to 0xa2 only if socfpga selected Changes in V6: - Remove unneeded backslash Changes in V5: - fix styling in if (..) per Tom's request Changes in V4: - Try search for partition type and failover to the defined partition number Changes in V3: - Add depends on DOS_PARTITION - Ensure that PARTTION_TYPE defaults to non-zero - Add ifdef around sys_ind in disk_partition structure Changes in V2: - Merge partition search into single partition function --- arch/arm/mach-socfpga/Kconfig | 6 ++++++ common/spl/Kconfig | 16 ++++++++++++++++ common/spl/spl_mmc.c | 15 +++++++++++++++ disk/part_dos.c | 1 + include/part.h | 3 +++ 5 files changed, 41 insertions(+)