| Message ID | 20170123210958.18410-14-hdegoede@redhat.com |
|---|---|
| State | Awaiting Upstream |
| Headers | show |
On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: > Make sure the P-Unit or the PMIC i2c bus is not in use when we send a > request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() > around P-Unit write accesses. Can't we just stuff the calls into the actual punit write function rather than sprinkling them all over the place? + a comment would be nice why it's there. Do we need a kconfig select/depends on the iosf_mbi thing? Or some ifdefs? > > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241 > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > Tested-by: tagorereddy <tagore.chandan@gmail.com> > --- > Changes in v2: > -Spelling: P-Unit, PMIC > -Adjust for iosf_mbi_punit_lock/_unlock to _acquire/_release rename > --- > drivers/gpu/drm/i915/intel_display.c | 6 ++++++ > drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++ > drivers/gpu/drm/i915/intel_runtime_pm.c | 9 +++++++++ > 3 files changed, 24 insertions(+) > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > index 5604701..13e5152 100644 > --- a/drivers/gpu/drm/i915/intel_display.c > +++ b/drivers/gpu/drm/i915/intel_display.c > @@ -47,6 +47,7 @@ > #include <drm/drm_rect.h> > #include <linux/dma_remapping.h> > #include <linux/reservation.h> > +#include <asm/iosf_mbi.h> > > static bool is_mmio_work(struct intel_flip_work *work) > { > @@ -6421,6 +6422,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) > cmd = 0; > > mutex_lock(&dev_priv->rps.hw_lock); > + iosf_mbi_punit_acquire(); > + > val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > val &= ~DSPFREQGUAR_MASK; > val |= (cmd << DSPFREQGUAR_SHIFT); > @@ -6430,6 +6433,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) > 50)) { > DRM_ERROR("timed out waiting for CDclk change\n"); > } > + iosf_mbi_punit_release(); > mutex_unlock(&dev_priv->rps.hw_lock); > > mutex_lock(&dev_priv->sb_lock); > @@ -6497,6 +6501,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) > cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; > > mutex_lock(&dev_priv->rps.hw_lock); > + iosf_mbi_punit_acquire(); > val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > val &= ~DSPFREQGUAR_MASK_CHV; > val |= (cmd << DSPFREQGUAR_SHIFT_CHV); > @@ -6506,6 +6511,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) > 50)) { > DRM_ERROR("timed out waiting for CDclk change\n"); > } > + iosf_mbi_punit_release(); > mutex_unlock(&dev_priv->rps.hw_lock); > > intel_update_cdclk(dev_priv); > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c > index 249623d..adff84a 100644 > --- a/drivers/gpu/drm/i915/intel_pm.c > +++ b/drivers/gpu/drm/i915/intel_pm.c > @@ -32,6 +32,7 @@ > #include "../../../platform/x86/intel_ips.h" > #include <linux/module.h> > #include <drm/drm_atomic_helper.h> > +#include <asm/iosf_mbi.h> > > /** > * DOC: RC6 > @@ -276,6 +277,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) > u32 val; > > mutex_lock(&dev_priv->rps.hw_lock); > + iosf_mbi_punit_acquire(); > > val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2); > if (enable) > @@ -290,6 +292,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) > FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) > DRM_ERROR("timed out waiting for Punit DDR DVFS request\n"); > > + iosf_mbi_punit_release(); > mutex_unlock(&dev_priv->rps.hw_lock); > } > > @@ -298,6 +301,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) > u32 val; > > mutex_lock(&dev_priv->rps.hw_lock); > + iosf_mbi_punit_acquire(); > > val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > if (enable) > @@ -306,6 +310,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) > val &= ~DSP_MAXFIFO_PM5_ENABLE; > vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); > > + iosf_mbi_punit_release(); > mutex_unlock(&dev_priv->rps.hw_lock); > } > > @@ -4553,6 +4558,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) > > if (IS_CHERRYVIEW(dev_priv)) { > mutex_lock(&dev_priv->rps.hw_lock); > + iosf_mbi_punit_acquire(); > > val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > if (val & DSP_MAXFIFO_PM5_ENABLE) > @@ -4582,6 +4588,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) > wm->level = VLV_WM_LEVEL_DDR_DVFS; > } > > + iosf_mbi_punit_release(); > mutex_unlock(&dev_priv->rps.hw_lock); > } > > @@ -4988,7 +4995,9 @@ static void valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val) > I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); > > if (val != dev_priv->rps.cur_freq) { > + iosf_mbi_punit_acquire(); > vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); > + iosf_mbi_punit_release(); > if (!IS_CHERRYVIEW(dev_priv)) > gen6_set_rps_thresholds(dev_priv, val); > } > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c > index c0b7e95..e66bcc8 100644 > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c > @@ -28,6 +28,7 @@ > > #include <linux/pm_runtime.h> > #include <linux/vgaarb.h> > +#include <asm/iosf_mbi.h> > > #include "i915_drv.h" > #include "intel_drv.h" > @@ -1027,6 +1028,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, > if (COND) > goto out; > > + iosf_mbi_punit_acquire(); > + > ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); > ctrl &= ~mask; > ctrl |= state; > @@ -1037,6 +1040,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, > state, > vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); > > + iosf_mbi_punit_release(); > + > #undef COND > > out: > @@ -1643,6 +1648,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, > if (COND) > goto out; > > + iosf_mbi_punit_acquire(); > + > ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > ctrl &= ~DP_SSC_MASK(pipe); > ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); > @@ -1653,6 +1660,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, > state, > vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); > > + iosf_mbi_punit_release(); > + > #undef COND > > out: > -- > 2.9.3
Hi, On 01/27/2017 02:51 PM, Ville Syrjälä wrote: > On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: >> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a >> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() >> around P-Unit write accesses. > > Can't we just stuff the calls into the actual punit write function > rather than sprinkling them all over the place? punit access is acquired across sections like this: iosf_mbi_punit_acquire(); val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); val &= ~DSPFREQGUAR_MASK; val |= (cmd << DSPFREQGUAR_SHIFT); vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), 50)) { DRM_ERROR("timed out waiting for CDclk change\n"); } iosf_mbi_punit_release(); Where we want to wait for the requested change to have taken effect before releasing the punit. > > + a comment would be nice why it's there. I will add comments to the acquire calls. > Do we need a kconfig select/depends on the iosf_mbi thing? Or some > ifdefs? No, the iosf_mbi header defines empty inline versions of iosf_mbi_punit_acquire / _release if IOSF_MBI is disabled, this does mean that iosf_mbi must be builtin if the i915 driver is. I'll add: depends on DRM_I915=IOSF_MBI || IOSF_MBI=y To the i915 Kconfig to enforce this. Regards, Hans > >> >> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241 >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> Tested-by: tagorereddy <tagore.chandan@gmail.com> >> --- >> Changes in v2: >> -Spelling: P-Unit, PMIC >> -Adjust for iosf_mbi_punit_lock/_unlock to _acquire/_release rename >> --- >> drivers/gpu/drm/i915/intel_display.c | 6 ++++++ >> drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++ >> drivers/gpu/drm/i915/intel_runtime_pm.c | 9 +++++++++ >> 3 files changed, 24 insertions(+) >> >> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c >> index 5604701..13e5152 100644 >> --- a/drivers/gpu/drm/i915/intel_display.c >> +++ b/drivers/gpu/drm/i915/intel_display.c >> @@ -47,6 +47,7 @@ >> #include <drm/drm_rect.h> >> #include <linux/dma_remapping.h> >> #include <linux/reservation.h> >> +#include <asm/iosf_mbi.h> >> >> static bool is_mmio_work(struct intel_flip_work *work) >> { >> @@ -6421,6 +6422,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) >> cmd = 0; >> >> mutex_lock(&dev_priv->rps.hw_lock); >> + iosf_mbi_punit_acquire(); >> + >> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >> val &= ~DSPFREQGUAR_MASK; >> val |= (cmd << DSPFREQGUAR_SHIFT); >> @@ -6430,6 +6433,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) >> 50)) { >> DRM_ERROR("timed out waiting for CDclk change\n"); >> } >> + iosf_mbi_punit_release(); >> mutex_unlock(&dev_priv->rps.hw_lock); >> >> mutex_lock(&dev_priv->sb_lock); >> @@ -6497,6 +6501,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) >> cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; >> >> mutex_lock(&dev_priv->rps.hw_lock); >> + iosf_mbi_punit_acquire(); >> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >> val &= ~DSPFREQGUAR_MASK_CHV; >> val |= (cmd << DSPFREQGUAR_SHIFT_CHV); >> @@ -6506,6 +6511,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) >> 50)) { >> DRM_ERROR("timed out waiting for CDclk change\n"); >> } >> + iosf_mbi_punit_release(); >> mutex_unlock(&dev_priv->rps.hw_lock); >> >> intel_update_cdclk(dev_priv); >> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c >> index 249623d..adff84a 100644 >> --- a/drivers/gpu/drm/i915/intel_pm.c >> +++ b/drivers/gpu/drm/i915/intel_pm.c >> @@ -32,6 +32,7 @@ >> #include "../../../platform/x86/intel_ips.h" >> #include <linux/module.h> >> #include <drm/drm_atomic_helper.h> >> +#include <asm/iosf_mbi.h> >> >> /** >> * DOC: RC6 >> @@ -276,6 +277,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) >> u32 val; >> >> mutex_lock(&dev_priv->rps.hw_lock); >> + iosf_mbi_punit_acquire(); >> >> val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2); >> if (enable) >> @@ -290,6 +292,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) >> FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) >> DRM_ERROR("timed out waiting for Punit DDR DVFS request\n"); >> >> + iosf_mbi_punit_release(); >> mutex_unlock(&dev_priv->rps.hw_lock); >> } >> >> @@ -298,6 +301,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) >> u32 val; >> >> mutex_lock(&dev_priv->rps.hw_lock); >> + iosf_mbi_punit_acquire(); >> >> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >> if (enable) >> @@ -306,6 +310,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) >> val &= ~DSP_MAXFIFO_PM5_ENABLE; >> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); >> >> + iosf_mbi_punit_release(); >> mutex_unlock(&dev_priv->rps.hw_lock); >> } >> >> @@ -4553,6 +4558,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) >> >> if (IS_CHERRYVIEW(dev_priv)) { >> mutex_lock(&dev_priv->rps.hw_lock); >> + iosf_mbi_punit_acquire(); >> >> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >> if (val & DSP_MAXFIFO_PM5_ENABLE) >> @@ -4582,6 +4588,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) >> wm->level = VLV_WM_LEVEL_DDR_DVFS; >> } >> >> + iosf_mbi_punit_release(); >> mutex_unlock(&dev_priv->rps.hw_lock); >> } >> >> @@ -4988,7 +4995,9 @@ static void valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val) >> I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); >> >> if (val != dev_priv->rps.cur_freq) { >> + iosf_mbi_punit_acquire(); >> vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); >> + iosf_mbi_punit_release(); >> if (!IS_CHERRYVIEW(dev_priv)) >> gen6_set_rps_thresholds(dev_priv, val); >> } >> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c >> index c0b7e95..e66bcc8 100644 >> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c >> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c >> @@ -28,6 +28,7 @@ >> >> #include <linux/pm_runtime.h> >> #include <linux/vgaarb.h> >> +#include <asm/iosf_mbi.h> >> >> #include "i915_drv.h" >> #include "intel_drv.h" >> @@ -1027,6 +1028,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, >> if (COND) >> goto out; >> >> + iosf_mbi_punit_acquire(); >> + >> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); >> ctrl &= ~mask; >> ctrl |= state; >> @@ -1037,6 +1040,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, >> state, >> vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); >> >> + iosf_mbi_punit_release(); >> + >> #undef COND >> >> out: >> @@ -1643,6 +1648,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, >> if (COND) >> goto out; >> >> + iosf_mbi_punit_acquire(); >> + >> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >> ctrl &= ~DP_SSC_MASK(pipe); >> ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); >> @@ -1653,6 +1660,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, >> state, >> vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); >> >> + iosf_mbi_punit_release(); >> + >> #undef COND >> >> out: >> -- >> 2.9.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 01/28/2017 05:25 PM, Hans de Goede wrote: > Hi, > > On 01/27/2017 02:51 PM, Ville Syrjälä wrote: >> On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: >>> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a >>> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() >>> around P-Unit write accesses. >> >> Can't we just stuff the calls into the actual punit write function >> rather than sprinkling them all over the place? > > punit access is acquired across sections like this: > > iosf_mbi_punit_acquire(); > > val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > val &= ~DSPFREQGUAR_MASK; > val |= (cmd << DSPFREQGUAR_SHIFT); > vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); > if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & > DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), > 50)) { > DRM_ERROR("timed out waiting for CDclk change\n"); > } > iosf_mbi_punit_release(); > > Where we want to wait for the requested change to have taken > effect before releasing the punit. > >> >> + a comment would be nice why it's there. > > I will add comments to the acquire calls. > >> Do we need a kconfig select/depends on the iosf_mbi thing? Or some >> ifdefs? > > No, the iosf_mbi header defines empty inline versions of > iosf_mbi_punit_acquire / _release if IOSF_MBI is disabled, > this does mean that iosf_mbi must be builtin if the i915 > driver is. I'll add: > > depends on DRM_I915=IOSF_MBI || IOSF_MBI=y > > To the i915 Kconfig to enforce this. Hmm, ok so that does not work (long cyclic dependency through the selection of ACPI_VIDEO). So I've now added this instead: # iosf_mbi needs to be builtin if we are builtin select IOSF_MBI if DRM_I915=y Regards, Hans >>> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241 >>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >>> Tested-by: tagorereddy <tagore.chandan@gmail.com> >>> --- >>> Changes in v2: >>> -Spelling: P-Unit, PMIC >>> -Adjust for iosf_mbi_punit_lock/_unlock to _acquire/_release rename >>> --- >>> drivers/gpu/drm/i915/intel_display.c | 6 ++++++ >>> drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++ >>> drivers/gpu/drm/i915/intel_runtime_pm.c | 9 +++++++++ >>> 3 files changed, 24 insertions(+) >>> >>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c >>> index 5604701..13e5152 100644 >>> --- a/drivers/gpu/drm/i915/intel_display.c >>> +++ b/drivers/gpu/drm/i915/intel_display.c >>> @@ -47,6 +47,7 @@ >>> #include <drm/drm_rect.h> >>> #include <linux/dma_remapping.h> >>> #include <linux/reservation.h> >>> +#include <asm/iosf_mbi.h> >>> >>> static bool is_mmio_work(struct intel_flip_work *work) >>> { >>> @@ -6421,6 +6422,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) >>> cmd = 0; >>> >>> mutex_lock(&dev_priv->rps.hw_lock); >>> + iosf_mbi_punit_acquire(); >>> + >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>> val &= ~DSPFREQGUAR_MASK; >>> val |= (cmd << DSPFREQGUAR_SHIFT); >>> @@ -6430,6 +6433,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) >>> 50)) { >>> DRM_ERROR("timed out waiting for CDclk change\n"); >>> } >>> + iosf_mbi_punit_release(); >>> mutex_unlock(&dev_priv->rps.hw_lock); >>> >>> mutex_lock(&dev_priv->sb_lock); >>> @@ -6497,6 +6501,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) >>> cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; >>> >>> mutex_lock(&dev_priv->rps.hw_lock); >>> + iosf_mbi_punit_acquire(); >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>> val &= ~DSPFREQGUAR_MASK_CHV; >>> val |= (cmd << DSPFREQGUAR_SHIFT_CHV); >>> @@ -6506,6 +6511,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) >>> 50)) { >>> DRM_ERROR("timed out waiting for CDclk change\n"); >>> } >>> + iosf_mbi_punit_release(); >>> mutex_unlock(&dev_priv->rps.hw_lock); >>> >>> intel_update_cdclk(dev_priv); >>> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c >>> index 249623d..adff84a 100644 >>> --- a/drivers/gpu/drm/i915/intel_pm.c >>> +++ b/drivers/gpu/drm/i915/intel_pm.c >>> @@ -32,6 +32,7 @@ >>> #include "../../../platform/x86/intel_ips.h" >>> #include <linux/module.h> >>> #include <drm/drm_atomic_helper.h> >>> +#include <asm/iosf_mbi.h> >>> >>> /** >>> * DOC: RC6 >>> @@ -276,6 +277,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) >>> u32 val; >>> >>> mutex_lock(&dev_priv->rps.hw_lock); >>> + iosf_mbi_punit_acquire(); >>> >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2); >>> if (enable) >>> @@ -290,6 +292,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) >>> FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) >>> DRM_ERROR("timed out waiting for Punit DDR DVFS request\n"); >>> >>> + iosf_mbi_punit_release(); >>> mutex_unlock(&dev_priv->rps.hw_lock); >>> } >>> >>> @@ -298,6 +301,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) >>> u32 val; >>> >>> mutex_lock(&dev_priv->rps.hw_lock); >>> + iosf_mbi_punit_acquire(); >>> >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>> if (enable) >>> @@ -306,6 +310,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) >>> val &= ~DSP_MAXFIFO_PM5_ENABLE; >>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); >>> >>> + iosf_mbi_punit_release(); >>> mutex_unlock(&dev_priv->rps.hw_lock); >>> } >>> >>> @@ -4553,6 +4558,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) >>> >>> if (IS_CHERRYVIEW(dev_priv)) { >>> mutex_lock(&dev_priv->rps.hw_lock); >>> + iosf_mbi_punit_acquire(); >>> >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>> if (val & DSP_MAXFIFO_PM5_ENABLE) >>> @@ -4582,6 +4588,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) >>> wm->level = VLV_WM_LEVEL_DDR_DVFS; >>> } >>> >>> + iosf_mbi_punit_release(); >>> mutex_unlock(&dev_priv->rps.hw_lock); >>> } >>> >>> @@ -4988,7 +4995,9 @@ static void valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val) >>> I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); >>> >>> if (val != dev_priv->rps.cur_freq) { >>> + iosf_mbi_punit_acquire(); >>> vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); >>> + iosf_mbi_punit_release(); >>> if (!IS_CHERRYVIEW(dev_priv)) >>> gen6_set_rps_thresholds(dev_priv, val); >>> } >>> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c >>> index c0b7e95..e66bcc8 100644 >>> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c >>> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c >>> @@ -28,6 +28,7 @@ >>> >>> #include <linux/pm_runtime.h> >>> #include <linux/vgaarb.h> >>> +#include <asm/iosf_mbi.h> >>> >>> #include "i915_drv.h" >>> #include "intel_drv.h" >>> @@ -1027,6 +1028,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, >>> if (COND) >>> goto out; >>> >>> + iosf_mbi_punit_acquire(); >>> + >>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); >>> ctrl &= ~mask; >>> ctrl |= state; >>> @@ -1037,6 +1040,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, >>> state, >>> vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); >>> >>> + iosf_mbi_punit_release(); >>> + >>> #undef COND >>> >>> out: >>> @@ -1643,6 +1648,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, >>> if (COND) >>> goto out; >>> >>> + iosf_mbi_punit_acquire(); >>> + >>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>> ctrl &= ~DP_SSC_MASK(pipe); >>> ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); >>> @@ -1653,6 +1660,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, >>> state, >>> vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); >>> >>> + iosf_mbi_punit_release(); >>> + >>> #undef COND >>> >>> out: >>> -- >>> 2.9.3 >> -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Jan 28, 2017 at 06:18:45PM +0100, Hans de Goede wrote: > Hi, > > On 01/28/2017 05:25 PM, Hans de Goede wrote: > > Hi, > > > > On 01/27/2017 02:51 PM, Ville Syrjälä wrote: > >> On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: > >>> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a > >>> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() > >>> around P-Unit write accesses. > >> > >> Can't we just stuff the calls into the actual punit write function > >> rather than sprinkling them all over the place? > > > > punit access is acquired across sections like this: > > > > iosf_mbi_punit_acquire(); > > > > val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > > val &= ~DSPFREQGUAR_MASK; > > val |= (cmd << DSPFREQGUAR_SHIFT); > > vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); > > if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & > > DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), > > 50)) { > > DRM_ERROR("timed out waiting for CDclk change\n"); > > } > > iosf_mbi_punit_release(); > > > > Where we want to wait for the requested change to have taken > > effect before releasing the punit. Hmm. That's somewhat unfortunate. It also highlights a problem with the patch wrt. RPS. We don't wait for the GPU to actually change frequencies in set_rps() because that would slow things down too much. So I have to wonder how much luck is needed to make this workaround really effective. > > > >> > >> + a comment would be nice why it's there. > > > > I will add comments to the acquire calls. > > > >> Do we need a kconfig select/depends on the iosf_mbi thing? Or some > >> ifdefs? > > > > No, the iosf_mbi header defines empty inline versions of > > iosf_mbi_punit_acquire / _release if IOSF_MBI is disabled, > > this does mean that iosf_mbi must be builtin if the i915 > > driver is. I'll add: > > > > depends on DRM_I915=IOSF_MBI || IOSF_MBI=y > > > > To the i915 Kconfig to enforce this. > > Hmm, ok so that does not work (long cyclic dependency through the > selection of ACPI_VIDEO). > > So I've now added this instead: > > # iosf_mbi needs to be builtin if we are builtin > select IOSF_MBI if DRM_I915=y That's probably not going to help anyone since i915 is usually a module. > > Regards, > > Hans > > > >>> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241 > >>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> > >>> Tested-by: tagorereddy <tagore.chandan@gmail.com> > >>> --- > >>> Changes in v2: > >>> -Spelling: P-Unit, PMIC > >>> -Adjust for iosf_mbi_punit_lock/_unlock to _acquire/_release rename > >>> --- > >>> drivers/gpu/drm/i915/intel_display.c | 6 ++++++ > >>> drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++ > >>> drivers/gpu/drm/i915/intel_runtime_pm.c | 9 +++++++++ > >>> 3 files changed, 24 insertions(+) > >>> > >>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > >>> index 5604701..13e5152 100644 > >>> --- a/drivers/gpu/drm/i915/intel_display.c > >>> +++ b/drivers/gpu/drm/i915/intel_display.c > >>> @@ -47,6 +47,7 @@ > >>> #include <drm/drm_rect.h> > >>> #include <linux/dma_remapping.h> > >>> #include <linux/reservation.h> > >>> +#include <asm/iosf_mbi.h> > >>> > >>> static bool is_mmio_work(struct intel_flip_work *work) > >>> { > >>> @@ -6421,6 +6422,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) > >>> cmd = 0; > >>> > >>> mutex_lock(&dev_priv->rps.hw_lock); > >>> + iosf_mbi_punit_acquire(); > >>> + > >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>> val &= ~DSPFREQGUAR_MASK; > >>> val |= (cmd << DSPFREQGUAR_SHIFT); > >>> @@ -6430,6 +6433,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) > >>> 50)) { > >>> DRM_ERROR("timed out waiting for CDclk change\n"); > >>> } > >>> + iosf_mbi_punit_release(); > >>> mutex_unlock(&dev_priv->rps.hw_lock); > >>> > >>> mutex_lock(&dev_priv->sb_lock); > >>> @@ -6497,6 +6501,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) > >>> cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; > >>> > >>> mutex_lock(&dev_priv->rps.hw_lock); > >>> + iosf_mbi_punit_acquire(); > >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>> val &= ~DSPFREQGUAR_MASK_CHV; > >>> val |= (cmd << DSPFREQGUAR_SHIFT_CHV); > >>> @@ -6506,6 +6511,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) > >>> 50)) { > >>> DRM_ERROR("timed out waiting for CDclk change\n"); > >>> } > >>> + iosf_mbi_punit_release(); > >>> mutex_unlock(&dev_priv->rps.hw_lock); > >>> > >>> intel_update_cdclk(dev_priv); > >>> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c > >>> index 249623d..adff84a 100644 > >>> --- a/drivers/gpu/drm/i915/intel_pm.c > >>> +++ b/drivers/gpu/drm/i915/intel_pm.c > >>> @@ -32,6 +32,7 @@ > >>> #include "../../../platform/x86/intel_ips.h" > >>> #include <linux/module.h> > >>> #include <drm/drm_atomic_helper.h> > >>> +#include <asm/iosf_mbi.h> > >>> > >>> /** > >>> * DOC: RC6 > >>> @@ -276,6 +277,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) > >>> u32 val; > >>> > >>> mutex_lock(&dev_priv->rps.hw_lock); > >>> + iosf_mbi_punit_acquire(); > >>> > >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2); > >>> if (enable) > >>> @@ -290,6 +292,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) > >>> FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) > >>> DRM_ERROR("timed out waiting for Punit DDR DVFS request\n"); > >>> > >>> + iosf_mbi_punit_release(); > >>> mutex_unlock(&dev_priv->rps.hw_lock); > >>> } > >>> > >>> @@ -298,6 +301,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) > >>> u32 val; > >>> > >>> mutex_lock(&dev_priv->rps.hw_lock); > >>> + iosf_mbi_punit_acquire(); > >>> > >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>> if (enable) > >>> @@ -306,6 +310,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) > >>> val &= ~DSP_MAXFIFO_PM5_ENABLE; > >>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); > >>> > >>> + iosf_mbi_punit_release(); > >>> mutex_unlock(&dev_priv->rps.hw_lock); > >>> } > >>> > >>> @@ -4553,6 +4558,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) > >>> > >>> if (IS_CHERRYVIEW(dev_priv)) { > >>> mutex_lock(&dev_priv->rps.hw_lock); > >>> + iosf_mbi_punit_acquire(); > >>> > >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>> if (val & DSP_MAXFIFO_PM5_ENABLE) > >>> @@ -4582,6 +4588,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) > >>> wm->level = VLV_WM_LEVEL_DDR_DVFS; > >>> } > >>> > >>> + iosf_mbi_punit_release(); > >>> mutex_unlock(&dev_priv->rps.hw_lock); > >>> } > >>> > >>> @@ -4988,7 +4995,9 @@ static void valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val) > >>> I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); > >>> > >>> if (val != dev_priv->rps.cur_freq) { > >>> + iosf_mbi_punit_acquire(); > >>> vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); > >>> + iosf_mbi_punit_release(); > >>> if (!IS_CHERRYVIEW(dev_priv)) > >>> gen6_set_rps_thresholds(dev_priv, val); > >>> } > >>> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c > >>> index c0b7e95..e66bcc8 100644 > >>> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c > >>> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c > >>> @@ -28,6 +28,7 @@ > >>> > >>> #include <linux/pm_runtime.h> > >>> #include <linux/vgaarb.h> > >>> +#include <asm/iosf_mbi.h> > >>> > >>> #include "i915_drv.h" > >>> #include "intel_drv.h" > >>> @@ -1027,6 +1028,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, > >>> if (COND) > >>> goto out; > >>> > >>> + iosf_mbi_punit_acquire(); > >>> + > >>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); > >>> ctrl &= ~mask; > >>> ctrl |= state; > >>> @@ -1037,6 +1040,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, > >>> state, > >>> vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); > >>> > >>> + iosf_mbi_punit_release(); > >>> + > >>> #undef COND > >>> > >>> out: > >>> @@ -1643,6 +1648,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, > >>> if (COND) > >>> goto out; > >>> > >>> + iosf_mbi_punit_acquire(); > >>> + > >>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>> ctrl &= ~DP_SSC_MASK(pipe); > >>> ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); > >>> @@ -1653,6 +1660,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, > >>> state, > >>> vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); > >>> > >>> + iosf_mbi_punit_release(); > >>> + > >>> #undef COND > >>> > >>> out: > >>> -- > >>> 2.9.3 > >>
Hi, On 30-01-17 14:10, Ville Syrjälä wrote: > On Sat, Jan 28, 2017 at 06:18:45PM +0100, Hans de Goede wrote: >> Hi, >> >> On 01/28/2017 05:25 PM, Hans de Goede wrote: >>> Hi, >>> >>> On 01/27/2017 02:51 PM, Ville Syrjälä wrote: >>>> On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: >>>>> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a >>>>> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() >>>>> around P-Unit write accesses. >>>> >>>> Can't we just stuff the calls into the actual punit write function >>>> rather than sprinkling them all over the place? >>> >>> punit access is acquired across sections like this: >>> >>> iosf_mbi_punit_acquire(); >>> >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>> val &= ~DSPFREQGUAR_MASK; >>> val |= (cmd << DSPFREQGUAR_SHIFT); >>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); >>> if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & >>> DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), >>> 50)) { >>> DRM_ERROR("timed out waiting for CDclk change\n"); >>> } >>> iosf_mbi_punit_release(); >>> >>> Where we want to wait for the requested change to have taken >>> effect before releasing the punit. > > Hmm. That's somewhat unfortunate. It also highlights a problem with the > patch wrt. RPS. We don't wait for the GPU to actually change frequencies > in set_rps() because that would slow things down too much. So I have to > wonder how much luck is needed to make this workaround really effective. So the history of this patch-set is that I wrote this patch before writing the patch to get FORCEWAKE_ALL before the pmic bus becomes active (patch 12/13). Since a lot of testing was done with this patch included in the patch-set and since it seemed a good idea regardless (given my experience with accessing the punit vs pmic bus accesses) I decided to leave it in. Possibly just the patch to get FORCEWAKE_ALL is enough, that one actually fixed things for me. That is also why I made this the last patch in the set. I asked tagorereddy to test his system without this patch, but he did not get around to that. After all we do tell the punit to not touch the bus by acquiring the pmic bus semaphore from i2c-desigware-baytrail.c, so maybe for RPS freq changes it honors that and properly waits. Maybe it honors that for all punit requests i915 does and the only real problem is the forcewake stuff ? I can try to drop this patch from my queue and run without it for a while and see if things don't regress. And also ask tagorereddy again to test his system that way. Does that (dropping this patch for now) sound like a good idea? >>>> + a comment would be nice why it's there. >>> >>> I will add comments to the acquire calls. >>> >>>> Do we need a kconfig select/depends on the iosf_mbi thing? Or some >>>> ifdefs? >>> >>> No, the iosf_mbi header defines empty inline versions of >>> iosf_mbi_punit_acquire / _release if IOSF_MBI is disabled, >>> this does mean that iosf_mbi must be builtin if the i915 >>> driver is. I'll add: >>> >>> depends on DRM_I915=IOSF_MBI || IOSF_MBI=y >>> >>> To the i915 Kconfig to enforce this. >> >> Hmm, ok so that does not work (long cyclic dependency through the >> selection of ACPI_VIDEO). >> >> So I've now added this instead: >> >> # iosf_mbi needs to be builtin if we are builtin >> select IOSF_MBI if DRM_I915=y > > That's probably not going to help anyone since i915 is usually a module. Right, that is fine, then either the IOSF_MBI symbols are available, or IOSF_MBI is disabled and we get the inline nops from the header. The problem scenario is DRM_I915=y and IOSF_MBI=m, which is not very realistic IMHO, but will get triggered by the random-config testing several contributors do and lead to an unresolved symbol error there. Hmm, thinking about this, this hunk actually belongs in 12/13 as that is the first patch to use iosf_mbi functions. Regards, Hans >>>>> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241 >>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >>>>> Tested-by: tagorereddy <tagore.chandan@gmail.com> >>>>> --- >>>>> Changes in v2: >>>>> -Spelling: P-Unit, PMIC >>>>> -Adjust for iosf_mbi_punit_lock/_unlock to _acquire/_release rename >>>>> --- >>>>> drivers/gpu/drm/i915/intel_display.c | 6 ++++++ >>>>> drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++ >>>>> drivers/gpu/drm/i915/intel_runtime_pm.c | 9 +++++++++ >>>>> 3 files changed, 24 insertions(+) >>>>> >>>>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c >>>>> index 5604701..13e5152 100644 >>>>> --- a/drivers/gpu/drm/i915/intel_display.c >>>>> +++ b/drivers/gpu/drm/i915/intel_display.c >>>>> @@ -47,6 +47,7 @@ >>>>> #include <drm/drm_rect.h> >>>>> #include <linux/dma_remapping.h> >>>>> #include <linux/reservation.h> >>>>> +#include <asm/iosf_mbi.h> >>>>> >>>>> static bool is_mmio_work(struct intel_flip_work *work) >>>>> { >>>>> @@ -6421,6 +6422,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) >>>>> cmd = 0; >>>>> >>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>> + iosf_mbi_punit_acquire(); >>>>> + >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>> val &= ~DSPFREQGUAR_MASK; >>>>> val |= (cmd << DSPFREQGUAR_SHIFT); >>>>> @@ -6430,6 +6433,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) >>>>> 50)) { >>>>> DRM_ERROR("timed out waiting for CDclk change\n"); >>>>> } >>>>> + iosf_mbi_punit_release(); >>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>> >>>>> mutex_lock(&dev_priv->sb_lock); >>>>> @@ -6497,6 +6501,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) >>>>> cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; >>>>> >>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>> + iosf_mbi_punit_acquire(); >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>> val &= ~DSPFREQGUAR_MASK_CHV; >>>>> val |= (cmd << DSPFREQGUAR_SHIFT_CHV); >>>>> @@ -6506,6 +6511,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) >>>>> 50)) { >>>>> DRM_ERROR("timed out waiting for CDclk change\n"); >>>>> } >>>>> + iosf_mbi_punit_release(); >>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>> >>>>> intel_update_cdclk(dev_priv); >>>>> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c >>>>> index 249623d..adff84a 100644 >>>>> --- a/drivers/gpu/drm/i915/intel_pm.c >>>>> +++ b/drivers/gpu/drm/i915/intel_pm.c >>>>> @@ -32,6 +32,7 @@ >>>>> #include "../../../platform/x86/intel_ips.h" >>>>> #include <linux/module.h> >>>>> #include <drm/drm_atomic_helper.h> >>>>> +#include <asm/iosf_mbi.h> >>>>> >>>>> /** >>>>> * DOC: RC6 >>>>> @@ -276,6 +277,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) >>>>> u32 val; >>>>> >>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>> + iosf_mbi_punit_acquire(); >>>>> >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2); >>>>> if (enable) >>>>> @@ -290,6 +292,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) >>>>> FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) >>>>> DRM_ERROR("timed out waiting for Punit DDR DVFS request\n"); >>>>> >>>>> + iosf_mbi_punit_release(); >>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>> } >>>>> >>>>> @@ -298,6 +301,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) >>>>> u32 val; >>>>> >>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>> + iosf_mbi_punit_acquire(); >>>>> >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>> if (enable) >>>>> @@ -306,6 +310,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) >>>>> val &= ~DSP_MAXFIFO_PM5_ENABLE; >>>>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); >>>>> >>>>> + iosf_mbi_punit_release(); >>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>> } >>>>> >>>>> @@ -4553,6 +4558,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) >>>>> >>>>> if (IS_CHERRYVIEW(dev_priv)) { >>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>> + iosf_mbi_punit_acquire(); >>>>> >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>> if (val & DSP_MAXFIFO_PM5_ENABLE) >>>>> @@ -4582,6 +4588,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) >>>>> wm->level = VLV_WM_LEVEL_DDR_DVFS; >>>>> } >>>>> >>>>> + iosf_mbi_punit_release(); >>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>> } >>>>> >>>>> @@ -4988,7 +4995,9 @@ static void valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val) >>>>> I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); >>>>> >>>>> if (val != dev_priv->rps.cur_freq) { >>>>> + iosf_mbi_punit_acquire(); >>>>> vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); >>>>> + iosf_mbi_punit_release(); >>>>> if (!IS_CHERRYVIEW(dev_priv)) >>>>> gen6_set_rps_thresholds(dev_priv, val); >>>>> } >>>>> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c >>>>> index c0b7e95..e66bcc8 100644 >>>>> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c >>>>> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c >>>>> @@ -28,6 +28,7 @@ >>>>> >>>>> #include <linux/pm_runtime.h> >>>>> #include <linux/vgaarb.h> >>>>> +#include <asm/iosf_mbi.h> >>>>> >>>>> #include "i915_drv.h" >>>>> #include "intel_drv.h" >>>>> @@ -1027,6 +1028,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, >>>>> if (COND) >>>>> goto out; >>>>> >>>>> + iosf_mbi_punit_acquire(); >>>>> + >>>>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); >>>>> ctrl &= ~mask; >>>>> ctrl |= state; >>>>> @@ -1037,6 +1040,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, >>>>> state, >>>>> vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); >>>>> >>>>> + iosf_mbi_punit_release(); >>>>> + >>>>> #undef COND >>>>> >>>>> out: >>>>> @@ -1643,6 +1648,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, >>>>> if (COND) >>>>> goto out; >>>>> >>>>> + iosf_mbi_punit_acquire(); >>>>> + >>>>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>> ctrl &= ~DP_SSC_MASK(pipe); >>>>> ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); >>>>> @@ -1653,6 +1660,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, >>>>> state, >>>>> vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); >>>>> >>>>> + iosf_mbi_punit_release(); >>>>> + >>>>> #undef COND >>>>> >>>>> out: >>>>> -- >>>>> 2.9.3 >>>> > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 30, 2017 at 04:02:19PM +0100, Hans de Goede wrote: > Hi, > > On 30-01-17 14:10, Ville Syrjälä wrote: > > On Sat, Jan 28, 2017 at 06:18:45PM +0100, Hans de Goede wrote: > >> Hi, > >> > >> On 01/28/2017 05:25 PM, Hans de Goede wrote: > >>> Hi, > >>> > >>> On 01/27/2017 02:51 PM, Ville Syrjälä wrote: > >>>> On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: > >>>>> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a > >>>>> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() > >>>>> around P-Unit write accesses. > >>>> > >>>> Can't we just stuff the calls into the actual punit write function > >>>> rather than sprinkling them all over the place? > >>> > >>> punit access is acquired across sections like this: > >>> > >>> iosf_mbi_punit_acquire(); > >>> > >>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>> val &= ~DSPFREQGUAR_MASK; > >>> val |= (cmd << DSPFREQGUAR_SHIFT); > >>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); > >>> if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & > >>> DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), > >>> 50)) { > >>> DRM_ERROR("timed out waiting for CDclk change\n"); > >>> } > >>> iosf_mbi_punit_release(); > >>> > >>> Where we want to wait for the requested change to have taken > >>> effect before releasing the punit. > > > > Hmm. That's somewhat unfortunate. It also highlights a problem with the > > patch wrt. RPS. We don't wait for the GPU to actually change frequencies > > in set_rps() because that would slow things down too much. So I have to > > wonder how much luck is needed to make this workaround really effective. > > So the history of this patch-set is that I wrote this patch before > writing the patch to get FORCEWAKE_ALL before the pmic bus becomes > active (patch 12/13). Since a lot of testing was done with this > patch included in the patch-set and since it seemed a good idea > regardless (given my experience with accessing the punit vs > pmic bus accesses) I decided to leave it in. > > Possibly just the patch to get FORCEWAKE_ALL is enough, that one > actually fixed things for me. That is also why I made this the > last patch in the set. I asked tagorereddy to test his system > without this patch, but he did not get around to that. > > After all we do tell the punit to not touch the bus by acquiring > the pmic bus semaphore from i2c-desigware-baytrail.c, so maybe > for RPS freq changes it honors that and properly waits. Maybe it > honors that for all punit requests i915 does and the only real > problem is the forcewake stuff ? > > I can try to drop this patch from my queue and run without it > for a while and see if things don't regress. And also ask > tagorereddy again to test his system that way. > > Does that (dropping this patch for now) sound like a good idea? More test results couldn't hurt at least. It also makes me wonder if just bumping the timeouts to some ridiculously high value would fix the problem as well. > > >>>> + a comment would be nice why it's there. > >>> > >>> I will add comments to the acquire calls. > >>> > >>>> Do we need a kconfig select/depends on the iosf_mbi thing? Or some > >>>> ifdefs? > >>> > >>> No, the iosf_mbi header defines empty inline versions of > >>> iosf_mbi_punit_acquire / _release if IOSF_MBI is disabled, > >>> this does mean that iosf_mbi must be builtin if the i915 > >>> driver is. I'll add: > >>> > >>> depends on DRM_I915=IOSF_MBI || IOSF_MBI=y > >>> > >>> To the i915 Kconfig to enforce this. > >> > >> Hmm, ok so that does not work (long cyclic dependency through the > >> selection of ACPI_VIDEO). > >> > >> So I've now added this instead: > >> > >> # iosf_mbi needs to be builtin if we are builtin > >> select IOSF_MBI if DRM_I915=y > > > > That's probably not going to help anyone since i915 is usually a module. > > Right, that is fine, then either the IOSF_MBI symbols are available, > or IOSF_MBI is disabled and we get the inline nops from the header. > > The problem scenario is DRM_I915=y and IOSF_MBI=m, which is not very > realistic IMHO, but will get triggered by the random-config testing > several contributors do and lead to an unresolved symbol error there. Well, from the user POV anything with IOSF_MBI==n can be a problem. So I'm not sure if we should allow that. > > Hmm, thinking about this, this hunk actually belongs in 12/13 as that > is the first patch to use iosf_mbi functions. > > Regards, > > Hans > > > > >>>>> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241 > >>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> > >>>>> Tested-by: tagorereddy <tagore.chandan@gmail.com> > >>>>> --- > >>>>> Changes in v2: > >>>>> -Spelling: P-Unit, PMIC > >>>>> -Adjust for iosf_mbi_punit_lock/_unlock to _acquire/_release rename > >>>>> --- > >>>>> drivers/gpu/drm/i915/intel_display.c | 6 ++++++ > >>>>> drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++ > >>>>> drivers/gpu/drm/i915/intel_runtime_pm.c | 9 +++++++++ > >>>>> 3 files changed, 24 insertions(+) > >>>>> > >>>>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c > >>>>> index 5604701..13e5152 100644 > >>>>> --- a/drivers/gpu/drm/i915/intel_display.c > >>>>> +++ b/drivers/gpu/drm/i915/intel_display.c > >>>>> @@ -47,6 +47,7 @@ > >>>>> #include <drm/drm_rect.h> > >>>>> #include <linux/dma_remapping.h> > >>>>> #include <linux/reservation.h> > >>>>> +#include <asm/iosf_mbi.h> > >>>>> > >>>>> static bool is_mmio_work(struct intel_flip_work *work) > >>>>> { > >>>>> @@ -6421,6 +6422,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) > >>>>> cmd = 0; > >>>>> > >>>>> mutex_lock(&dev_priv->rps.hw_lock); > >>>>> + iosf_mbi_punit_acquire(); > >>>>> + > >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>>>> val &= ~DSPFREQGUAR_MASK; > >>>>> val |= (cmd << DSPFREQGUAR_SHIFT); > >>>>> @@ -6430,6 +6433,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) > >>>>> 50)) { > >>>>> DRM_ERROR("timed out waiting for CDclk change\n"); > >>>>> } > >>>>> + iosf_mbi_punit_release(); > >>>>> mutex_unlock(&dev_priv->rps.hw_lock); > >>>>> > >>>>> mutex_lock(&dev_priv->sb_lock); > >>>>> @@ -6497,6 +6501,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) > >>>>> cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; > >>>>> > >>>>> mutex_lock(&dev_priv->rps.hw_lock); > >>>>> + iosf_mbi_punit_acquire(); > >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>>>> val &= ~DSPFREQGUAR_MASK_CHV; > >>>>> val |= (cmd << DSPFREQGUAR_SHIFT_CHV); > >>>>> @@ -6506,6 +6511,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) > >>>>> 50)) { > >>>>> DRM_ERROR("timed out waiting for CDclk change\n"); > >>>>> } > >>>>> + iosf_mbi_punit_release(); > >>>>> mutex_unlock(&dev_priv->rps.hw_lock); > >>>>> > >>>>> intel_update_cdclk(dev_priv); > >>>>> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c > >>>>> index 249623d..adff84a 100644 > >>>>> --- a/drivers/gpu/drm/i915/intel_pm.c > >>>>> +++ b/drivers/gpu/drm/i915/intel_pm.c > >>>>> @@ -32,6 +32,7 @@ > >>>>> #include "../../../platform/x86/intel_ips.h" > >>>>> #include <linux/module.h> > >>>>> #include <drm/drm_atomic_helper.h> > >>>>> +#include <asm/iosf_mbi.h> > >>>>> > >>>>> /** > >>>>> * DOC: RC6 > >>>>> @@ -276,6 +277,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) > >>>>> u32 val; > >>>>> > >>>>> mutex_lock(&dev_priv->rps.hw_lock); > >>>>> + iosf_mbi_punit_acquire(); > >>>>> > >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2); > >>>>> if (enable) > >>>>> @@ -290,6 +292,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) > >>>>> FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) > >>>>> DRM_ERROR("timed out waiting for Punit DDR DVFS request\n"); > >>>>> > >>>>> + iosf_mbi_punit_release(); > >>>>> mutex_unlock(&dev_priv->rps.hw_lock); > >>>>> } > >>>>> > >>>>> @@ -298,6 +301,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) > >>>>> u32 val; > >>>>> > >>>>> mutex_lock(&dev_priv->rps.hw_lock); > >>>>> + iosf_mbi_punit_acquire(); > >>>>> > >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>>>> if (enable) > >>>>> @@ -306,6 +310,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) > >>>>> val &= ~DSP_MAXFIFO_PM5_ENABLE; > >>>>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); > >>>>> > >>>>> + iosf_mbi_punit_release(); > >>>>> mutex_unlock(&dev_priv->rps.hw_lock); > >>>>> } > >>>>> > >>>>> @@ -4553,6 +4558,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) > >>>>> > >>>>> if (IS_CHERRYVIEW(dev_priv)) { > >>>>> mutex_lock(&dev_priv->rps.hw_lock); > >>>>> + iosf_mbi_punit_acquire(); > >>>>> > >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>>>> if (val & DSP_MAXFIFO_PM5_ENABLE) > >>>>> @@ -4582,6 +4588,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) > >>>>> wm->level = VLV_WM_LEVEL_DDR_DVFS; > >>>>> } > >>>>> > >>>>> + iosf_mbi_punit_release(); > >>>>> mutex_unlock(&dev_priv->rps.hw_lock); > >>>>> } > >>>>> > >>>>> @@ -4988,7 +4995,9 @@ static void valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val) > >>>>> I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); > >>>>> > >>>>> if (val != dev_priv->rps.cur_freq) { > >>>>> + iosf_mbi_punit_acquire(); > >>>>> vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); > >>>>> + iosf_mbi_punit_release(); > >>>>> if (!IS_CHERRYVIEW(dev_priv)) > >>>>> gen6_set_rps_thresholds(dev_priv, val); > >>>>> } > >>>>> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c > >>>>> index c0b7e95..e66bcc8 100644 > >>>>> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c > >>>>> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c > >>>>> @@ -28,6 +28,7 @@ > >>>>> > >>>>> #include <linux/pm_runtime.h> > >>>>> #include <linux/vgaarb.h> > >>>>> +#include <asm/iosf_mbi.h> > >>>>> > >>>>> #include "i915_drv.h" > >>>>> #include "intel_drv.h" > >>>>> @@ -1027,6 +1028,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, > >>>>> if (COND) > >>>>> goto out; > >>>>> > >>>>> + iosf_mbi_punit_acquire(); > >>>>> + > >>>>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); > >>>>> ctrl &= ~mask; > >>>>> ctrl |= state; > >>>>> @@ -1037,6 +1040,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, > >>>>> state, > >>>>> vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); > >>>>> > >>>>> + iosf_mbi_punit_release(); > >>>>> + > >>>>> #undef COND > >>>>> > >>>>> out: > >>>>> @@ -1643,6 +1648,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, > >>>>> if (COND) > >>>>> goto out; > >>>>> > >>>>> + iosf_mbi_punit_acquire(); > >>>>> + > >>>>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>>>> ctrl &= ~DP_SSC_MASK(pipe); > >>>>> ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); > >>>>> @@ -1653,6 +1660,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, > >>>>> state, > >>>>> vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); > >>>>> > >>>>> + iosf_mbi_punit_release(); > >>>>> + > >>>>> #undef COND > >>>>> > >>>>> out: > >>>>> -- > >>>>> 2.9.3 > >>>> > >
Hi, On 30-01-17 16:11, Ville Syrjälä wrote: > On Mon, Jan 30, 2017 at 04:02:19PM +0100, Hans de Goede wrote: >> Hi, >> >> On 30-01-17 14:10, Ville Syrjälä wrote: >>> On Sat, Jan 28, 2017 at 06:18:45PM +0100, Hans de Goede wrote: >>>> Hi, >>>> >>>> On 01/28/2017 05:25 PM, Hans de Goede wrote: >>>>> Hi, >>>>> >>>>> On 01/27/2017 02:51 PM, Ville Syrjälä wrote: >>>>>> On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: >>>>>>> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a >>>>>>> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() >>>>>>> around P-Unit write accesses. >>>>>> >>>>>> Can't we just stuff the calls into the actual punit write function >>>>>> rather than sprinkling them all over the place? >>>>> >>>>> punit access is acquired across sections like this: >>>>> >>>>> iosf_mbi_punit_acquire(); >>>>> >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>> val &= ~DSPFREQGUAR_MASK; >>>>> val |= (cmd << DSPFREQGUAR_SHIFT); >>>>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); >>>>> if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & >>>>> DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), >>>>> 50)) { >>>>> DRM_ERROR("timed out waiting for CDclk change\n"); >>>>> } >>>>> iosf_mbi_punit_release(); >>>>> >>>>> Where we want to wait for the requested change to have taken >>>>> effect before releasing the punit. >>> >>> Hmm. That's somewhat unfortunate. It also highlights a problem with the >>> patch wrt. RPS. We don't wait for the GPU to actually change frequencies >>> in set_rps() because that would slow things down too much. So I have to >>> wonder how much luck is needed to make this workaround really effective. >> >> So the history of this patch-set is that I wrote this patch before >> writing the patch to get FORCEWAKE_ALL before the pmic bus becomes >> active (patch 12/13). Since a lot of testing was done with this >> patch included in the patch-set and since it seemed a good idea >> regardless (given my experience with accessing the punit vs >> pmic bus accesses) I decided to leave it in. >> >> Possibly just the patch to get FORCEWAKE_ALL is enough, that one >> actually fixed things for me. That is also why I made this the >> last patch in the set. I asked tagorereddy to test his system >> without this patch, but he did not get around to that. >> >> After all we do tell the punit to not touch the bus by acquiring >> the pmic bus semaphore from i2c-desigware-baytrail.c, so maybe >> for RPS freq changes it honors that and properly waits. Maybe it >> honors that for all punit requests i915 does and the only real >> problem is the forcewake stuff ? >> >> I can try to drop this patch from my queue and run without it >> for a while and see if things don't regress. And also ask >> tagorereddy again to test his system that way. >> >> Does that (dropping this patch for now) sound like a good idea? > > More test results couldn't hurt at least. It also makes me wonder if > just bumping the timeouts to some ridiculously high value would fix > the problem as well. I've already tried bumping the forcewake timeout from 50 to 250ms, before writing the patch to just get forcewake_all before the pmic bus access begins, that does not fix things, and since we busy wait for this timeout from non-sleeping context 250ms already is way too high. >>>>>> + a comment would be nice why it's there. >>>>> >>>>> I will add comments to the acquire calls. >>>>> >>>>>> Do we need a kconfig select/depends on the iosf_mbi thing? Or some >>>>>> ifdefs? >>>>> >>>>> No, the iosf_mbi header defines empty inline versions of >>>>> iosf_mbi_punit_acquire / _release if IOSF_MBI is disabled, >>>>> this does mean that iosf_mbi must be builtin if the i915 >>>>> driver is. I'll add: >>>>> >>>>> depends on DRM_I915=IOSF_MBI || IOSF_MBI=y >>>>> >>>>> To the i915 Kconfig to enforce this. >>>> >>>> Hmm, ok so that does not work (long cyclic dependency through the >>>> selection of ACPI_VIDEO). >>>> >>>> So I've now added this instead: >>>> >>>> # iosf_mbi needs to be builtin if we are builtin >>>> select IOSF_MBI if DRM_I915=y >>> >>> That's probably not going to help anyone since i915 is usually a module. >> >> Right, that is fine, then either the IOSF_MBI symbols are available, >> or IOSF_MBI is disabled and we get the inline nops from the header. >> >> The problem scenario is DRM_I915=y and IOSF_MBI=m, which is not very >> realistic IMHO, but will get triggered by the random-config testing >> several contributors do and lead to an unresolved symbol error there. > > Well, from the user POV anything with IOSF_MBI==n can be a problem. > So I'm not sure if we should allow that. So you're suggesting we just add an unconditional "select IOSF_MBI" to the i915 Kconfig entry? Regards, Hans >>>>>>> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241 >>>>>>> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >>>>>>> Tested-by: tagorereddy <tagore.chandan@gmail.com> >>>>>>> --- >>>>>>> Changes in v2: >>>>>>> -Spelling: P-Unit, PMIC >>>>>>> -Adjust for iosf_mbi_punit_lock/_unlock to _acquire/_release rename >>>>>>> --- >>>>>>> drivers/gpu/drm/i915/intel_display.c | 6 ++++++ >>>>>>> drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++ >>>>>>> drivers/gpu/drm/i915/intel_runtime_pm.c | 9 +++++++++ >>>>>>> 3 files changed, 24 insertions(+) >>>>>>> >>>>>>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c >>>>>>> index 5604701..13e5152 100644 >>>>>>> --- a/drivers/gpu/drm/i915/intel_display.c >>>>>>> +++ b/drivers/gpu/drm/i915/intel_display.c >>>>>>> @@ -47,6 +47,7 @@ >>>>>>> #include <drm/drm_rect.h> >>>>>>> #include <linux/dma_remapping.h> >>>>>>> #include <linux/reservation.h> >>>>>>> +#include <asm/iosf_mbi.h> >>>>>>> >>>>>>> static bool is_mmio_work(struct intel_flip_work *work) >>>>>>> { >>>>>>> @@ -6421,6 +6422,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) >>>>>>> cmd = 0; >>>>>>> >>>>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>>>> + iosf_mbi_punit_acquire(); >>>>>>> + >>>>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>>>> val &= ~DSPFREQGUAR_MASK; >>>>>>> val |= (cmd << DSPFREQGUAR_SHIFT); >>>>>>> @@ -6430,6 +6433,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) >>>>>>> 50)) { >>>>>>> DRM_ERROR("timed out waiting for CDclk change\n"); >>>>>>> } >>>>>>> + iosf_mbi_punit_release(); >>>>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>>>> >>>>>>> mutex_lock(&dev_priv->sb_lock); >>>>>>> @@ -6497,6 +6501,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) >>>>>>> cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; >>>>>>> >>>>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>>>> + iosf_mbi_punit_acquire(); >>>>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>>>> val &= ~DSPFREQGUAR_MASK_CHV; >>>>>>> val |= (cmd << DSPFREQGUAR_SHIFT_CHV); >>>>>>> @@ -6506,6 +6511,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) >>>>>>> 50)) { >>>>>>> DRM_ERROR("timed out waiting for CDclk change\n"); >>>>>>> } >>>>>>> + iosf_mbi_punit_release(); >>>>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>>>> >>>>>>> intel_update_cdclk(dev_priv); >>>>>>> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c >>>>>>> index 249623d..adff84a 100644 >>>>>>> --- a/drivers/gpu/drm/i915/intel_pm.c >>>>>>> +++ b/drivers/gpu/drm/i915/intel_pm.c >>>>>>> @@ -32,6 +32,7 @@ >>>>>>> #include "../../../platform/x86/intel_ips.h" >>>>>>> #include <linux/module.h> >>>>>>> #include <drm/drm_atomic_helper.h> >>>>>>> +#include <asm/iosf_mbi.h> >>>>>>> >>>>>>> /** >>>>>>> * DOC: RC6 >>>>>>> @@ -276,6 +277,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) >>>>>>> u32 val; >>>>>>> >>>>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>>>> + iosf_mbi_punit_acquire(); >>>>>>> >>>>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2); >>>>>>> if (enable) >>>>>>> @@ -290,6 +292,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) >>>>>>> FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) >>>>>>> DRM_ERROR("timed out waiting for Punit DDR DVFS request\n"); >>>>>>> >>>>>>> + iosf_mbi_punit_release(); >>>>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>>>> } >>>>>>> >>>>>>> @@ -298,6 +301,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) >>>>>>> u32 val; >>>>>>> >>>>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>>>> + iosf_mbi_punit_acquire(); >>>>>>> >>>>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>>>> if (enable) >>>>>>> @@ -306,6 +310,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) >>>>>>> val &= ~DSP_MAXFIFO_PM5_ENABLE; >>>>>>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); >>>>>>> >>>>>>> + iosf_mbi_punit_release(); >>>>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>>>> } >>>>>>> >>>>>>> @@ -4553,6 +4558,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) >>>>>>> >>>>>>> if (IS_CHERRYVIEW(dev_priv)) { >>>>>>> mutex_lock(&dev_priv->rps.hw_lock); >>>>>>> + iosf_mbi_punit_acquire(); >>>>>>> >>>>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>>>> if (val & DSP_MAXFIFO_PM5_ENABLE) >>>>>>> @@ -4582,6 +4588,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) >>>>>>> wm->level = VLV_WM_LEVEL_DDR_DVFS; >>>>>>> } >>>>>>> >>>>>>> + iosf_mbi_punit_release(); >>>>>>> mutex_unlock(&dev_priv->rps.hw_lock); >>>>>>> } >>>>>>> >>>>>>> @@ -4988,7 +4995,9 @@ static void valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val) >>>>>>> I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); >>>>>>> >>>>>>> if (val != dev_priv->rps.cur_freq) { >>>>>>> + iosf_mbi_punit_acquire(); >>>>>>> vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); >>>>>>> + iosf_mbi_punit_release(); >>>>>>> if (!IS_CHERRYVIEW(dev_priv)) >>>>>>> gen6_set_rps_thresholds(dev_priv, val); >>>>>>> } >>>>>>> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c >>>>>>> index c0b7e95..e66bcc8 100644 >>>>>>> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c >>>>>>> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c >>>>>>> @@ -28,6 +28,7 @@ >>>>>>> >>>>>>> #include <linux/pm_runtime.h> >>>>>>> #include <linux/vgaarb.h> >>>>>>> +#include <asm/iosf_mbi.h> >>>>>>> >>>>>>> #include "i915_drv.h" >>>>>>> #include "intel_drv.h" >>>>>>> @@ -1027,6 +1028,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, >>>>>>> if (COND) >>>>>>> goto out; >>>>>>> >>>>>>> + iosf_mbi_punit_acquire(); >>>>>>> + >>>>>>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); >>>>>>> ctrl &= ~mask; >>>>>>> ctrl |= state; >>>>>>> @@ -1037,6 +1040,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, >>>>>>> state, >>>>>>> vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); >>>>>>> >>>>>>> + iosf_mbi_punit_release(); >>>>>>> + >>>>>>> #undef COND >>>>>>> >>>>>>> out: >>>>>>> @@ -1643,6 +1648,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, >>>>>>> if (COND) >>>>>>> goto out; >>>>>>> >>>>>>> + iosf_mbi_punit_acquire(); >>>>>>> + >>>>>>> ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>>>> ctrl &= ~DP_SSC_MASK(pipe); >>>>>>> ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); >>>>>>> @@ -1653,6 +1660,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, >>>>>>> state, >>>>>>> vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); >>>>>>> >>>>>>> + iosf_mbi_punit_release(); >>>>>>> + >>>>>>> #undef COND >>>>>>> >>>>>>> out: >>>>>>> -- >>>>>>> 2.9.3 >>>>>> >>> > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jan 30, 2017 at 04:27:58PM +0100, Hans de Goede wrote: > Hi, > > On 30-01-17 16:11, Ville Syrjälä wrote: > > On Mon, Jan 30, 2017 at 04:02:19PM +0100, Hans de Goede wrote: > >> Hi, > >> > >> On 30-01-17 14:10, Ville Syrjälä wrote: > >>> On Sat, Jan 28, 2017 at 06:18:45PM +0100, Hans de Goede wrote: > >>>> Hi, > >>>> > >>>> On 01/28/2017 05:25 PM, Hans de Goede wrote: > >>>>> Hi, > >>>>> > >>>>> On 01/27/2017 02:51 PM, Ville Syrjälä wrote: > >>>>>> On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: > >>>>>>> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a > >>>>>>> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() > >>>>>>> around P-Unit write accesses. > >>>>>> > >>>>>> Can't we just stuff the calls into the actual punit write function > >>>>>> rather than sprinkling them all over the place? > >>>>> > >>>>> punit access is acquired across sections like this: > >>>>> > >>>>> iosf_mbi_punit_acquire(); > >>>>> > >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); > >>>>> val &= ~DSPFREQGUAR_MASK; > >>>>> val |= (cmd << DSPFREQGUAR_SHIFT); > >>>>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); > >>>>> if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & > >>>>> DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), > >>>>> 50)) { > >>>>> DRM_ERROR("timed out waiting for CDclk change\n"); > >>>>> } > >>>>> iosf_mbi_punit_release(); > >>>>> > >>>>> Where we want to wait for the requested change to have taken > >>>>> effect before releasing the punit. > >>> > >>> Hmm. That's somewhat unfortunate. It also highlights a problem with the > >>> patch wrt. RPS. We don't wait for the GPU to actually change frequencies > >>> in set_rps() because that would slow things down too much. So I have to > >>> wonder how much luck is needed to make this workaround really effective. > >> > >> So the history of this patch-set is that I wrote this patch before > >> writing the patch to get FORCEWAKE_ALL before the pmic bus becomes > >> active (patch 12/13). Since a lot of testing was done with this > >> patch included in the patch-set and since it seemed a good idea > >> regardless (given my experience with accessing the punit vs > >> pmic bus accesses) I decided to leave it in. > >> > >> Possibly just the patch to get FORCEWAKE_ALL is enough, that one > >> actually fixed things for me. That is also why I made this the > >> last patch in the set. I asked tagorereddy to test his system > >> without this patch, but he did not get around to that. > >> > >> After all we do tell the punit to not touch the bus by acquiring > >> the pmic bus semaphore from i2c-desigware-baytrail.c, so maybe > >> for RPS freq changes it honors that and properly waits. Maybe it > >> honors that for all punit requests i915 does and the only real > >> problem is the forcewake stuff ? > >> > >> I can try to drop this patch from my queue and run without it > >> for a while and see if things don't regress. And also ask > >> tagorereddy again to test his system that way. > >> > >> Does that (dropping this patch for now) sound like a good idea? > > > > More test results couldn't hurt at least. It also makes me wonder if > > just bumping the timeouts to some ridiculously high value would fix > > the problem as well. > > I've already tried bumping the forcewake timeout from 50 to 250ms, > before writing the patch to just get forcewake_all before the pmic > bus access begins, that does not fix things, And you bumped the i2c mutex timeout as well? Or does that fail somehow gracefully if it can't get the mutex? > and since we busy wait > for this timeout from non-sleeping context 250ms already is way too > high. Sure, but I'm just trying to understand if the problem is simply caused by proceeding with some hardware access without getting the i2c mutex. > > >>>>>> + a comment would be nice why it's there. > >>>>> > >>>>> I will add comments to the acquire calls. > >>>>> > >>>>>> Do we need a kconfig select/depends on the iosf_mbi thing? Or some > >>>>>> ifdefs? > >>>>> > >>>>> No, the iosf_mbi header defines empty inline versions of > >>>>> iosf_mbi_punit_acquire / _release if IOSF_MBI is disabled, > >>>>> this does mean that iosf_mbi must be builtin if the i915 > >>>>> driver is. I'll add: > >>>>> > >>>>> depends on DRM_I915=IOSF_MBI || IOSF_MBI=y > >>>>> > >>>>> To the i915 Kconfig to enforce this. > >>>> > >>>> Hmm, ok so that does not work (long cyclic dependency through the > >>>> selection of ACPI_VIDEO). > >>>> > >>>> So I've now added this instead: > >>>> > >>>> # iosf_mbi needs to be builtin if we are builtin > >>>> select IOSF_MBI if DRM_I915=y > >>> > >>> That's probably not going to help anyone since i915 is usually a module. > >> > >> Right, that is fine, then either the IOSF_MBI symbols are available, > >> or IOSF_MBI is disabled and we get the inline nops from the header. > >> > >> The problem scenario is DRM_I915=y and IOSF_MBI=m, which is not very > >> realistic IMHO, but will get triggered by the random-config testing > >> several contributors do and lead to an unresolved symbol error there. > > > > Well, from the user POV anything with IOSF_MBI==n can be a problem. > > So I'm not sure if we should allow that. > > So you're suggesting we just add an unconditional "select IOSF_MBI" > to the i915 Kconfig entry? Yeah, that should at least cut down the number of people accidentally misconfiguring their kernels and hitting this problem in the future.
Hi, On 30-01-17 16:38, Ville Syrjälä wrote: > On Mon, Jan 30, 2017 at 04:27:58PM +0100, Hans de Goede wrote: >> Hi, >> >> On 30-01-17 16:11, Ville Syrjälä wrote: >>> On Mon, Jan 30, 2017 at 04:02:19PM +0100, Hans de Goede wrote: >>>> Hi, >>>> >>>> On 30-01-17 14:10, Ville Syrjälä wrote: >>>>> On Sat, Jan 28, 2017 at 06:18:45PM +0100, Hans de Goede wrote: >>>>>> Hi, >>>>>> >>>>>> On 01/28/2017 05:25 PM, Hans de Goede wrote: >>>>>>> Hi, >>>>>>> >>>>>>> On 01/27/2017 02:51 PM, Ville Syrjälä wrote: >>>>>>>> On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: >>>>>>>>> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a >>>>>>>>> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() >>>>>>>>> around P-Unit write accesses. >>>>>>>> >>>>>>>> Can't we just stuff the calls into the actual punit write function >>>>>>>> rather than sprinkling them all over the place? >>>>>>> >>>>>>> punit access is acquired across sections like this: >>>>>>> >>>>>>> iosf_mbi_punit_acquire(); >>>>>>> >>>>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>>>> val &= ~DSPFREQGUAR_MASK; >>>>>>> val |= (cmd << DSPFREQGUAR_SHIFT); >>>>>>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); >>>>>>> if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & >>>>>>> DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), >>>>>>> 50)) { >>>>>>> DRM_ERROR("timed out waiting for CDclk change\n"); >>>>>>> } >>>>>>> iosf_mbi_punit_release(); >>>>>>> >>>>>>> Where we want to wait for the requested change to have taken >>>>>>> effect before releasing the punit. >>>>> >>>>> Hmm. That's somewhat unfortunate. It also highlights a problem with the >>>>> patch wrt. RPS. We don't wait for the GPU to actually change frequencies >>>>> in set_rps() because that would slow things down too much. So I have to >>>>> wonder how much luck is needed to make this workaround really effective. >>>> >>>> So the history of this patch-set is that I wrote this patch before >>>> writing the patch to get FORCEWAKE_ALL before the pmic bus becomes >>>> active (patch 12/13). Since a lot of testing was done with this >>>> patch included in the patch-set and since it seemed a good idea >>>> regardless (given my experience with accessing the punit vs >>>> pmic bus accesses) I decided to leave it in. >>>> >>>> Possibly just the patch to get FORCEWAKE_ALL is enough, that one >>>> actually fixed things for me. That is also why I made this the >>>> last patch in the set. I asked tagorereddy to test his system >>>> without this patch, but he did not get around to that. >>>> >>>> After all we do tell the punit to not touch the bus by acquiring >>>> the pmic bus semaphore from i2c-desigware-baytrail.c, so maybe >>>> for RPS freq changes it honors that and properly waits. Maybe it >>>> honors that for all punit requests i915 does and the only real >>>> problem is the forcewake stuff ? >>>> >>>> I can try to drop this patch from my queue and run without it >>>> for a while and see if things don't regress. And also ask >>>> tagorereddy again to test his system that way. >>>> >>>> Does that (dropping this patch for now) sound like a good idea? >>> >>> More test results couldn't hurt at least. It also makes me wonder if >>> just bumping the timeouts to some ridiculously high value would fix >>> the problem as well. >> >> I've already tried bumping the forcewake timeout from 50 to 250ms, >> before writing the patch to just get forcewake_all before the pmic >> bus access begins, that does not fix things, > > And you bumped the i2c mutex timeout as well? Or does that fail somehow > gracefully if it can't get the mutex? It will fail the i2c transfer with -ETIMEOUT, which will make the driver report an error instead of e.g. the battery level, but it should not affect the forcewake calls and those still failed with the large timeout. So yes basically the i2c mutex fails gracefully. > >> and since we busy wait >> for this timeout from non-sleeping context 250ms already is way too >> high. > > Sure, but I'm just trying to understand if the problem is simply caused > by proceeding with some hardware access without getting the i2c mutex. Understood. >>>>>>>> + a comment would be nice why it's there. >>>>>>> >>>>>>> I will add comments to the acquire calls. >>>>>>> >>>>>>>> Do we need a kconfig select/depends on the iosf_mbi thing? Or some >>>>>>>> ifdefs? >>>>>>> >>>>>>> No, the iosf_mbi header defines empty inline versions of >>>>>>> iosf_mbi_punit_acquire / _release if IOSF_MBI is disabled, >>>>>>> this does mean that iosf_mbi must be builtin if the i915 >>>>>>> driver is. I'll add: >>>>>>> >>>>>>> depends on DRM_I915=IOSF_MBI || IOSF_MBI=y >>>>>>> >>>>>>> To the i915 Kconfig to enforce this. >>>>>> >>>>>> Hmm, ok so that does not work (long cyclic dependency through the >>>>>> selection of ACPI_VIDEO). >>>>>> >>>>>> So I've now added this instead: >>>>>> >>>>>> # iosf_mbi needs to be builtin if we are builtin >>>>>> select IOSF_MBI if DRM_I915=y >>>>> >>>>> That's probably not going to help anyone since i915 is usually a module. >>>> >>>> Right, that is fine, then either the IOSF_MBI symbols are available, >>>> or IOSF_MBI is disabled and we get the inline nops from the header. >>>> >>>> The problem scenario is DRM_I915=y and IOSF_MBI=m, which is not very >>>> realistic IMHO, but will get triggered by the random-config testing >>>> several contributors do and lead to an unresolved symbol error there. >>> >>> Well, from the user POV anything with IOSF_MBI==n can be a problem. >>> So I'm not sure if we should allow that. >> >> So you're suggesting we just add an unconditional "select IOSF_MBI" >> to the i915 Kconfig entry? > > Yeah, that should at least cut down the number of people accidentally > misconfiguring their kernels and hitting this problem in the future. Ok. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 30-01-17 16:11, Ville Syrjälä wrote: > On Mon, Jan 30, 2017 at 04:02:19PM +0100, Hans de Goede wrote: >> Hi, >> >> On 30-01-17 14:10, Ville Syrjälä wrote: >>> On Sat, Jan 28, 2017 at 06:18:45PM +0100, Hans de Goede wrote: >>>> Hi, >>>> >>>> On 01/28/2017 05:25 PM, Hans de Goede wrote: >>>>> Hi, >>>>> >>>>> On 01/27/2017 02:51 PM, Ville Syrjälä wrote: >>>>>> On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote: >>>>>>> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a >>>>>>> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release() >>>>>>> around P-Unit write accesses. >>>>>> >>>>>> Can't we just stuff the calls into the actual punit write function >>>>>> rather than sprinkling them all over the place? >>>>> >>>>> punit access is acquired across sections like this: >>>>> >>>>> iosf_mbi_punit_acquire(); >>>>> >>>>> val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); >>>>> val &= ~DSPFREQGUAR_MASK; >>>>> val |= (cmd << DSPFREQGUAR_SHIFT); >>>>> vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); >>>>> if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & >>>>> DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), >>>>> 50)) { >>>>> DRM_ERROR("timed out waiting for CDclk change\n"); >>>>> } >>>>> iosf_mbi_punit_release(); >>>>> >>>>> Where we want to wait for the requested change to have taken >>>>> effect before releasing the punit. >>> >>> Hmm. That's somewhat unfortunate. It also highlights a problem with the >>> patch wrt. RPS. We don't wait for the GPU to actually change frequencies >>> in set_rps() because that would slow things down too much. So I have to >>> wonder how much luck is needed to make this workaround really effective. >> >> So the history of this patch-set is that I wrote this patch before >> writing the patch to get FORCEWAKE_ALL before the pmic bus becomes >> active (patch 12/13). Since a lot of testing was done with this >> patch included in the patch-set and since it seemed a good idea >> regardless (given my experience with accessing the punit vs >> pmic bus accesses) I decided to leave it in. >> >> Possibly just the patch to get FORCEWAKE_ALL is enough, that one >> actually fixed things for me. That is also why I made this the >> last patch in the set. I asked tagorereddy to test his system >> without this patch, but he did not get around to that. >> >> After all we do tell the punit to not touch the bus by acquiring >> the pmic bus semaphore from i2c-desigware-baytrail.c, so maybe >> for RPS freq changes it honors that and properly waits. Maybe it >> honors that for all punit requests i915 does and the only real >> problem is the forcewake stuff ? >> >> I can try to drop this patch from my queue and run without it >> for a while and see if things don't regress. And also ask >> tagorereddy again to test his system that way. >> >> Does that (dropping this patch for now) sound like a good idea? > > More test results couldn't hurt at least. Ok, I've done a whole bunch of suspend + resume cycles on my cht tablet with this patch dropped and things still work fine (where as without the first 12 patches of this patch-set that was a guarenteed way to get a forcewake timeout followed by a lockup). So it indeed seems this test is not necessary. I'll send a v3 with that patch dropped, as well as your comments for patches 11 and 12 being addressed. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5604701..13e5152 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -47,6 +47,7 @@ #include <drm/drm_rect.h> #include <linux/dma_remapping.h> #include <linux/reservation.h> +#include <asm/iosf_mbi.h> static bool is_mmio_work(struct intel_flip_work *work) { @@ -6421,6 +6422,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) cmd = 0; mutex_lock(&dev_priv->rps.hw_lock); + iosf_mbi_punit_acquire(); + val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); val &= ~DSPFREQGUAR_MASK; val |= (cmd << DSPFREQGUAR_SHIFT); @@ -6430,6 +6433,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) 50)) { DRM_ERROR("timed out waiting for CDclk change\n"); } + iosf_mbi_punit_release(); mutex_unlock(&dev_priv->rps.hw_lock); mutex_lock(&dev_priv->sb_lock); @@ -6497,6 +6501,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; mutex_lock(&dev_priv->rps.hw_lock); + iosf_mbi_punit_acquire(); val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); val &= ~DSPFREQGUAR_MASK_CHV; val |= (cmd << DSPFREQGUAR_SHIFT_CHV); @@ -6506,6 +6511,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk) 50)) { DRM_ERROR("timed out waiting for CDclk change\n"); } + iosf_mbi_punit_release(); mutex_unlock(&dev_priv->rps.hw_lock); intel_update_cdclk(dev_priv); diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 249623d..adff84a 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -32,6 +32,7 @@ #include "../../../platform/x86/intel_ips.h" #include <linux/module.h> #include <drm/drm_atomic_helper.h> +#include <asm/iosf_mbi.h> /** * DOC: RC6 @@ -276,6 +277,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) u32 val; mutex_lock(&dev_priv->rps.hw_lock); + iosf_mbi_punit_acquire(); val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2); if (enable) @@ -290,6 +292,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable) FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) DRM_ERROR("timed out waiting for Punit DDR DVFS request\n"); + iosf_mbi_punit_release(); mutex_unlock(&dev_priv->rps.hw_lock); } @@ -298,6 +301,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) u32 val; mutex_lock(&dev_priv->rps.hw_lock); + iosf_mbi_punit_acquire(); val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); if (enable) @@ -306,6 +310,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable) val &= ~DSP_MAXFIFO_PM5_ENABLE; vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); + iosf_mbi_punit_release(); mutex_unlock(&dev_priv->rps.hw_lock); } @@ -4553,6 +4558,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) if (IS_CHERRYVIEW(dev_priv)) { mutex_lock(&dev_priv->rps.hw_lock); + iosf_mbi_punit_acquire(); val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); if (val & DSP_MAXFIFO_PM5_ENABLE) @@ -4582,6 +4588,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev) wm->level = VLV_WM_LEVEL_DDR_DVFS; } + iosf_mbi_punit_release(); mutex_unlock(&dev_priv->rps.hw_lock); } @@ -4988,7 +4995,9 @@ static void valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val) I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val)); if (val != dev_priv->rps.cur_freq) { + iosf_mbi_punit_acquire(); vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val); + iosf_mbi_punit_release(); if (!IS_CHERRYVIEW(dev_priv)) gen6_set_rps_thresholds(dev_priv, val); } diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index c0b7e95..e66bcc8 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -28,6 +28,7 @@ #include <linux/pm_runtime.h> #include <linux/vgaarb.h> +#include <asm/iosf_mbi.h> #include "i915_drv.h" #include "intel_drv.h" @@ -1027,6 +1028,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, if (COND) goto out; + iosf_mbi_punit_acquire(); + ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL); ctrl &= ~mask; ctrl |= state; @@ -1037,6 +1040,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv, state, vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL)); + iosf_mbi_punit_release(); + #undef COND out: @@ -1643,6 +1648,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, if (COND) goto out; + iosf_mbi_punit_acquire(); + ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); ctrl &= ~DP_SSC_MASK(pipe); ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe); @@ -1653,6 +1660,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv, state, vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ)); + iosf_mbi_punit_release(); + #undef COND out: