diff mbox

[10/11] Document: dt: binding: imx: update doc for imx6sll

Message ID 1480660774-25055-11-git-send-email-ping.bai@nxp.com
State New
Headers show

Commit Message

Jacky Bai Dec. 2, 2016, 6:39 a.m. UTC 
Add necessary document update for i.MX6SLL support.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
---
 .../devicetree/bindings/clock/imx6sll-clock.txt    | 13 ++++++++
 .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt       | 37 ++++++++++++++++++++++
 2 files changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt

Comments

Stephen Boyd Dec. 8, 2016, 10:54 p.m. UTC | #1 
On 12/02, Bai Ping wrote:
> Add necessary document update for i.MX6SLL support.
> 
> Signed-off-by: Bai Ping <ping.bai@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx6sll-clock.txt    | 13 ++++++++
>  .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt       | 37 ++++++++++++++++++++++

Please split the bindings into different patches and put them
closer to the drivers that use them in the series.

>  2 files changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> new file mode 100644
> index 0000000..4f52efa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> @@ -0,0 +1,13 @@
> +* Clock bindings for Freescale i.MX6 UltraLite
> +
> +Required properties:
> +- compatible: Should be "fsl,imx6sll-ccm"
> +- reg: Address and length of the register set
> +- #clock-cells: Should be <1>
> +- clocks: list of clock specifiers, must contain an entry for each required
> +  entry in clock-names
> +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
> +
> +The clock consumer should specify the desired clock by having the clock
> +ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
> +for the full list of i.MX6 SLL clock IDs.

Can you add an example node here?
Rob Herring (Arm) Dec. 9, 2016, 6:12 p.m. UTC | #2 
On Fri, Dec 02, 2016 at 02:39:33PM +0800, Bai Ping wrote:
> Add necessary document update for i.MX6SLL support.
> 
> Signed-off-by: Bai Ping <ping.bai@nxp.com>
> ---
>  .../devicetree/bindings/clock/imx6sll-clock.txt    | 13 ++++++++
>  .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt       | 37 ++++++++++++++++++++++
>  2 files changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> new file mode 100644
> index 0000000..4f52efa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> @@ -0,0 +1,13 @@
> +* Clock bindings for Freescale i.MX6 UltraLite

I thought UltraLite was MX6UL?

> +
> +Required properties:
> +- compatible: Should be "fsl,imx6sll-ccm"
> +- reg: Address and length of the register set
> +- #clock-cells: Should be <1>
> +- clocks: list of clock specifiers, must contain an entry for each required
> +  entry in clock-names
> +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
> +
> +The clock consumer should specify the desired clock by having the clock
> +ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
> +for the full list of i.MX6 SLL clock IDs.
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
> new file mode 100644
> index 0000000..096e471
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
> @@ -0,0 +1,37 @@
> +* Freescale i.MX6 UltraLite IOMUX Controller

ditto

> +
> +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
> +and usage.
> +
> +Required properties:
> +- compatible: "fsl,imx6sll-iomuxc"
> +- fsl,pins: each entry consists of 6 integers and represents the mux and config
> +  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
> +  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
> +  imx6ul-pinfunc.h under device tree source folder.  The last integer CONFIG is
> +  the pad setting value like pull-up on this pin.  Please refer to i.MX6SLL
> +  Reference Manual for detailed CONFIG settings.
> +
> +CONFIG bits definition:
> +PAD_CTL_LVE			(1 << 22)
> +PAD_CTL_HYS                     (1 << 16)
> +PAD_CTL_PUS_100K_DOWN           (0 << 14)
> +PAD_CTL_PUS_47K_UP              (1 << 14)
> +PAD_CTL_PUS_100K_UP             (2 << 14)
> +PAD_CTL_PUS_22K_UP              (3 << 14)
> +PAD_CTL_PUE                     (1 << 13)
> +PAD_CTL_PKE                     (1 << 12)
> +PAD_CTL_ODE                     (1 << 11)
> +PAD_CTL_SPEED_LOW               (0 << 6)
> +PAD_CTL_SPEED_MED               (1 << 6)
> +PAD_CTL_SPEED_HIGH              (3 << 6)
> +PAD_CTL_DSE_DISABLE             (0 << 3)
> +PAD_CTL_DSE_260ohm              (1 << 3)
> +PAD_CTL_DSE_130ohm              (2 << 3)
> +PAD_CTL_DSE_87ohm               (3 << 3)
> +PAD_CTL_DSE_65ohm               (4 << 3)
> +PAD_CTL_DSE_52ohm               (5 << 3)
> +PAD_CTL_DSE_43ohm               (6 << 3)
> +PAD_CTL_DSE_37ohm               (7 << 3)
> +PAD_CTL_SRE_FAST                (1 << 0)
> +PAD_CTL_SRE_SLOW                (0 << 0)
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jacky Bai Dec. 12, 2016, 2:32 a.m. UTC | #3 
> Subject: Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll
> 
> On 12/02, Bai Ping wrote:
> > Add necessary document update for i.MX6SLL support.
> >
> > Signed-off-by: Bai Ping <ping.bai@nxp.com>
> > ---
> >  .../devicetree/bindings/clock/imx6sll-clock.txt    | 13 ++++++++
> >  .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt       | 37 ++++++++++++++++++++++
> 
> Please split the bindings into different patches and put them closer to the
> drivers that use them in the series.

Ok, I will fix it in V2.

> 
> >  2 files changed, 50 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
> >
> > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > new file mode 100644
> > index 0000000..4f52efa
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > @@ -0,0 +1,13 @@
> > +* Clock bindings for Freescale i.MX6 UltraLite
> > +
> > +Required properties:
> > +- compatible: Should be "fsl,imx6sll-ccm"
> > +- reg: Address and length of the register set
> > +- #clock-cells: Should be <1>
> > +- clocks: list of clock specifiers, must contain an entry for each
> > +required
> > +  entry in clock-names
> > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
> > +
> > +The clock consumer should specify the desired clock by having the
> > +clock ID in its "clocks" phandle cell.  See
> > +include/dt-bindings/clock/imx6sll-clock.h
> > +for the full list of i.MX6 SLL clock IDs.
> 
> Can you add an example node here?
> 

Thanks for review, I will add it in V2. 

> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux
> Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jacky Bai Dec. 12, 2016, 2:59 a.m. UTC | #4 
> Subject: Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll
> 
> On Fri, Dec 02, 2016 at 02:39:33PM +0800, Bai Ping wrote:
> > Add necessary document update for i.MX6SLL support.
> >
> > Signed-off-by: Bai Ping <ping.bai@nxp.com>
> > ---
> >  .../devicetree/bindings/clock/imx6sll-clock.txt    | 13 ++++++++
> >  .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt       | 37 ++++++++++++++++++++++
> >  2 files changed, 50 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
> >
> > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > new file mode 100644
> > index 0000000..4f52efa
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > @@ -0,0 +1,13 @@
> > +* Clock bindings for Freescale i.MX6 UltraLite
> 
> I thought UltraLite was MX6UL?
> 

Sorry, it is a typo, will fix in V2.

> > +
> > +Required properties:
> > +- compatible: Should be "fsl,imx6sll-ccm"
> > +- reg: Address and length of the register set
> > +- #clock-cells: Should be <1>
> > +- clocks: list of clock specifiers, must contain an entry for each
> > +required
> > +  entry in clock-names
> > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
> > +
> > +The clock consumer should specify the desired clock by having the
> > +clock ID in its "clocks" phandle cell.  See
> > +include/dt-bindings/clock/imx6sll-clock.h
> > +for the full list of i.MX6 SLL clock IDs.
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
> > b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
> > new file mode 100644
> > index 0000000..096e471
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.tx
> > +++ t
> > @@ -0,0 +1,37 @@
> > +* Freescale i.MX6 UltraLite IOMUX Controller
> 
> ditto
> 

Will fix in V2. Thanks for review.

> > +
> > +Please refer to fsl,imx-pinctrl.txt in this directory for common
> > +binding part and usage.
> > +
> > +Required properties:
> > +- compatible: "fsl,imx6sll-iomuxc"
> > +- fsl,pins: each entry consists of 6 integers and represents the mux
> > +and config
> > +  setting for one pin.  The first 5 integers <mux_reg conf_reg
> > +input_reg mux_val
> > +  input_val> are specified using a PIN_FUNC_ID macro, which can be
> > +found in
> > +  imx6ul-pinfunc.h under device tree source folder.  The last integer
> > +CONFIG is
> > +  the pad setting value like pull-up on this pin.  Please refer to
> > +i.MX6SLL
> > +  Reference Manual for detailed CONFIG settings.
> > +
> > +CONFIG bits definition:
> > +PAD_CTL_LVE			(1 << 22)
> > +PAD_CTL_HYS                     (1 << 16)
> > +PAD_CTL_PUS_100K_DOWN           (0 << 14)
> > +PAD_CTL_PUS_47K_UP              (1 << 14)
> > +PAD_CTL_PUS_100K_UP             (2 << 14)
> > +PAD_CTL_PUS_22K_UP              (3 << 14)
> > +PAD_CTL_PUE                     (1 << 13)
> > +PAD_CTL_PKE                     (1 << 12)
> > +PAD_CTL_ODE                     (1 << 11)
> > +PAD_CTL_SPEED_LOW               (0 << 6)
> > +PAD_CTL_SPEED_MED               (1 << 6)
> > +PAD_CTL_SPEED_HIGH              (3 << 6)
> > +PAD_CTL_DSE_DISABLE             (0 << 3)
> > +PAD_CTL_DSE_260ohm              (1 << 3)
> > +PAD_CTL_DSE_130ohm              (2 << 3)
> > +PAD_CTL_DSE_87ohm               (3 << 3)
> > +PAD_CTL_DSE_65ohm               (4 << 3)
> > +PAD_CTL_DSE_52ohm               (5 << 3)
> > +PAD_CTL_DSE_43ohm               (6 << 3)
> > +PAD_CTL_DSE_37ohm               (7 << 3)
> > +PAD_CTL_SRE_FAST                (1 << 0)
> > +PAD_CTL_SRE_SLOW                (0 << 0)
> > --
> > 1.9.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
new file mode 100644
index 0000000..4f52efa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
@@ -0,0 +1,13 @@ 
+* Clock bindings for Freescale i.MX6 UltraLite
+
+Required properties:
+- compatible: Should be "fsl,imx6sll-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
+for the full list of i.MX6 SLL clock IDs.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
new file mode 100644
index 0000000..096e471
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
@@ -0,0 +1,37 @@ 
+* Freescale i.MX6 UltraLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sll-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx6ul-pinfunc.h under device tree source folder.  The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX6SLL
+  Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE			(1 << 22)
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (0 << 6)
+PAD_CTL_SPEED_MED               (1 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_260ohm              (1 << 3)
+PAD_CTL_DSE_130ohm              (2 << 3)
+PAD_CTL_DSE_87ohm               (3 << 3)
+PAD_CTL_DSE_65ohm               (4 << 3)
+PAD_CTL_DSE_52ohm               (5 << 3)
+PAD_CTL_DSE_43ohm               (6 << 3)
+PAD_CTL_DSE_37ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)