diff mbox

Remove cached PID/TID in clone

Message ID d0b874df-d9f7-6121-6786-6ac1292a82ec@linaro.org
State New
Headers show

Commit Message

Adhemerval Zanella Netto Nov. 8, 2016, 7:58 p.m. UTC
Hi Florian, thanks for the review.

On 07/11/2016 15:21, Florian Weimer wrote:
> On 10/13/2016 09:45 PM, Adhemerval Zanella wrote:
>> This patch remove the PID cache and usage in current GLIBC code.  Current
>> usage is mainly used for performance optimization to avoid the syscall,
>> however it adds some issues:
>>
>>   - The exposed clone syscall will try to set pid/tid to make the new
>>     thread somewhat compatible with current GLIBC assumptions.  This cause
>>     a set of issue with new workloads and usercases (such as BZ#17214 and
> 
> “usecases”

Ack, I changed it on this new version.

> 
>>     [1]) as well for new internal usage of clone to optimize other algorithms
>>     (such as clone plus CLONE_VM for posix_spawn, BZ#19957).
>>
>>   - The caching complexity also added some bugs in the past [2] [3] and
>>     requires more effort of each port to handle such requirements (for
>>     both clone and vfork implementation).
>>
>>   - Caching performance gain in mainly or getpid and some specific
>>     code paths. The getpid performance leverage is questionable [4],
>>     either by the idea of getpid being a hotspot as for the getpid
>>     implementation itself (if it is indeed a justifiable hotspot a
>>     vDSO symbol could let to a much more simpler solution).
> 
> It's a hotspot for incorrect/broken fork detection.

If you mean the assert on fork.c, I review the code and it seems
unnecessary to remove the assert on child creation:

146   if (pid == 0)
147     {
148       struct pthread *self = THREAD_SELF;
149 
150       assert (THREAD_GETMEM (self, tid) != ppid);
151 

I added it back. 

> 
>>     Other usage is mainly for non usual code paths, such as pthread
>>     cancellation signal and handling.
>>
>> For thread creation (on atack allocation) the code simplification in fact
> 
> “stack allocation”

Ack.

> 
>> adds some performance gain due the no need of transverse the stack
>> cache and invalidate each element pid.
>>
>> Other thread usages will require a direct getpid syscall, such as
>> cancellation/setxid signal, thread cancellation, thread fail path
>> (at create_thread), and thread signal (pthread_kill and
>> pthread_sigqueue).  However these are hardly usual hotspots and I
>> think adding a syscall is justifiable.
>>
>> It also simplifies both the clone and vfork arch-specific implementation.
>> And by review each fork implementation there are some discrepancies that
>> this patch also solves:
>>
>>   - microblaze clone/vfork does not set/reset the pid/tid field
>>   - hppa uses the default vfork implementation that fallback to fork.
>>     Since vfork is deprecated I do not think we should bother with it.
>>
>> The patch also removes the TID caching in clone. My understanding for
>> such semantic is try provide some pthread usage after a user program
>> issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
>> and pthread tid member). However, as stated before in multiple threads,
>> GLIBC provides clone syscalls without futher supporting all this
> 
> “further”

Ack.

> 
>> semantics. It means that, although GLIBC currently tries a better effort,
>> since it does not make any more guarantees, specially for newer and newer
>> clone flags.
> 
> So the question is whether this is used internally.  Why do you think this is safe?  Because we set it again with SET_TID_ADDRESS?
> 

The tid fields is basically used internally on pthread implementations
(including getpid) and since correct usage means thread *must* be
created using pthread_create we are sure the tid field will be
correctly set due 'set_tid_address' from __pthread_initialize_pids.

>> diff --git a/nptl/descr.h b/nptl/descr.h
>> index 8e4938d..17a2c9f 100644
>> --- a/nptl/descr.h
>> +++ b/nptl/descr.h
>> @@ -167,7 +167,7 @@ struct pthread
>>       therefore stack) used' flag.  */
>>    pid_t tid;
>>
>> -  /* Process ID - thread group ID in kernel speak.  */
>> +  /* Ununsed.  */
>>    pid_t pid;
> 
> Please rename to “pid_unused” or something like that, to make sure it's no longer referenced.

I renamed it on my local branch and I also updated the change spot
that it incur:



> 
>> diff --git a/sysdeps/unix/sysv/linux/getpid.c b/sysdeps/unix/sysv/linux/getpid.c
>> index 1124549..2bfafed 100644
>> --- a/sysdeps/unix/sysv/linux/getpid.c
>> +++ b/sysdeps/unix/sysv/linux/getpid.c
> 
> Can you drop this file completely, so that the default implementation is used?

I do not have a preference here, but I think now we can use syscalls.list
instead.  I change it on this version.

> 
>> diff --git a/sysdeps/unix/sysv/linux/pthread_kill.c b/sysdeps/unix/sysv/linux/pthread_kill.c
> 
>> @@ -49,14 +50,15 @@ __pthread_kill (pthread_t threadid, int signo)
>>    /* We have a special syscall to do the work.  */
>>    INTERNAL_SYSCALL_DECL (err);
>>
>> +  pid_t pid = getpid ();
> 
> Use __getpid for consistency?

Alright, I change it.

> 
>>    /* One comment: The PID field in the TCB can temporarily be changed
>>       (in fork).  But this must not affect this code here.  Since this
>>       function would have to be called while the thread is executing
>>       fork, it would have to happen in a signal handler.  But this is
>>       no allowed, pthread_kill is not guaranteed to be async-safe.  */
> 
> Comment is outdated.

Ack, I removed this implementation.

> 
>> diff --git a/sysdeps/unix/sysv/linux/pthread_sigqueue.c b/sysdeps/unix/sysv/linux/pthread_sigqueue.c
>> index 7694d54..642366b 100644
>> --- a/sysdeps/unix/sysv/linux/pthread_sigqueue.c
>> +++ b/sysdeps/unix/sysv/linux/pthread_sigqueue.c
>> @@ -49,12 +49,14 @@ pthread_sigqueue (pthread_t threadid, int signo, const union sigval value)
>>    if (signo == SIGCANCEL || signo == SIGTIMER || signo == SIGSETXID)
>>      return EINVAL;
>>
>> +  pid_t pid = getpid ();
> 
> Use __getpid for consistency?

Ack.

> 
>>      function would have to be called while the thread is executing
>>      fork, it would have to happen in a signal handler.  But this is
> 
> Comment is outdated.

Ack, I removed it.
> 
>> diff --git a/sysdeps/unix/sysv/linux/tst-clone2.c b/sysdeps/unix/sysv/linux/tst-clone2.c
>> index 68a7e6d..b20332a 100644
>> --- a/sysdeps/unix/sysv/linux/tst-clone2.c
> 
> It may make sense to update the file comment.
> 
>> -  pid_t pid = THREAD_GETMEM (THREAD_SELF, pid);
>> -  pid_t tid = THREAD_GETMEM (THREAD_SELF, tid);
>> +  /* Clone without flags do not cache the pid and tid is only set in thread
> 
> “does not cache”.  But the comment seems outdated?

Maybe, my initial idea was to make sure that of this caching
not being used anymore.  I removed this comment as well.

> 
>> +     creation by using CLONE_PARENT_SETTID plus pthread tid field address.
>> +     So to actually get all parent's pid and own pid/tid it requires to use
>> +     the syscalls.  */
>> +  pid_t ppid = getppid ();
>> +  pid_t pid = getpid ();
>> +  pid_t tid = syscall (__NR_gettid);
>>
>> +  while (write (pipefd[1], &ppid, sizeof ppid) < 0)
>> +    continue;
>>    while (write (pipefd[1], &pid, sizeof pid) < 0)
>>      continue;
>>    while (write (pipefd[1], &tid, sizeof tid) < 0)
> 
> These while loops look incorrect.  Perhaps just fail the test if the result is not equal to sizeof of the value being written?

I changed it.

> 
>> +  /* Some sanity checks for clone syscall: returned ppid should be currernt
> 
> “current”
> 

Ack.

> Thanks,
> Florian

In attachment I am sending a revised patch.

Comments

Florian Weimer Nov. 8, 2016, 8:11 p.m. UTC | #1
* Adhemerval Zanella:

>> It's a hotspot for incorrect/broken fork detection.
>
> If you mean the assert on fork.c, I review the code and it seems
> unnecessary to remove the assert on child creation:

No, something else entirely.  OpenSSL mixes the current PID into the
randomness pool, in an attempt to make sure that the streams generated
by parent and child are different:

    pid_t curr_pid = getpid();
…
        if (curr_pid) {         /* just in the first iteration to save time */
            if (!MD_Update(m, (unsigned char *)&curr_pid, sizeof curr_pid))
                goto err;
            curr_pid = 0;
        }

<https://github.com/openssl/openssl/blob/master/crypto/rand/md_rand.c#L283>

This happens at every invocation of RAND_bytes.  It may show up in
profiles if all the other system calls (time, gettimeofday etc.) are
handled by the vDSO.

But I suggest that this shouldn't block your change.  It's just
something we should be aware of.  If the kernel provides a more
efficient way to get the PID, we can change glibc to use it.

More comments about your revised patch tomorrow.
Adhemerval Zanella Netto Nov. 8, 2016, 8:36 p.m. UTC | #2
On 08/11/2016 18:11, Florian Weimer wrote:
> * Adhemerval Zanella:
> 
>>> It's a hotspot for incorrect/broken fork detection.
>>
>> If you mean the assert on fork.c, I review the code and it seems
>> unnecessary to remove the assert on child creation:
> 
> No, something else entirely.  OpenSSL mixes the current PID into the
> randomness pool, in an attempt to make sure that the streams generated
> by parent and child are different:
> 
>     pid_t curr_pid = getpid();
> …
>         if (curr_pid) {         /* just in the first iteration to save time */
>             if (!MD_Update(m, (unsigned char *)&curr_pid, sizeof curr_pid))
>                 goto err;
>             curr_pid = 0;
>         }
> 
> <https://github.com/openssl/openssl/blob/master/crypto/rand/md_rand.c#L283>
> 
> This happens at every invocation of RAND_bytes.  It may show up in
> profiles if all the other system calls (time, gettimeofday etc.) are
> handled by the vDSO.
> 
> But I suggest that this shouldn't block your change.  It's just
> something we should be aware of.  If the kernel provides a more
> efficient way to get the PID, we can change glibc to use it.
> 
> More comments about your revised patch tomorrow.
> 

Right, I referenced a quite old discussion about the pid caching
and the randomness provided by getpid [1].  And I think that an
portable application like OpenSSL should not rely on an specific
getpid implementation in a hotspot call, since on mostly 
implementations it will likely be a syscall.

[1] http://yarchive.net/comp/linux/getpid_caching.html
Florian Weimer Nov. 8, 2016, 8:44 p.m. UTC | #3
* Adhemerval Zanella:

> On 08/11/2016 18:11, Florian Weimer wrote:
>> * Adhemerval Zanella:
>> 
>>>> It's a hotspot for incorrect/broken fork detection.
>>>
>>> If you mean the assert on fork.c, I review the code and it seems
>>> unnecessary to remove the assert on child creation:
>> 
>> No, something else entirely.  OpenSSL mixes the current PID into the
>> randomness pool, in an attempt to make sure that the streams generated
>> by parent and child are different:
>> 
>>     pid_t curr_pid = getpid();
>> …
>>         if (curr_pid) {         /* just in the first iteration to save time */
>>             if (!MD_Update(m, (unsigned char *)&curr_pid, sizeof curr_pid))
>>                 goto err;
>>             curr_pid = 0;
>>         }
>> 
>> <https://github.com/openssl/openssl/blob/master/crypto/rand/md_rand.c#L283>
>> 
>> This happens at every invocation of RAND_bytes.  It may show up in
>> profiles if all the other system calls (time, gettimeofday etc.) are
>> handled by the vDSO.
>> 
>> But I suggest that this shouldn't block your change.  It's just
>> something we should be aware of.  If the kernel provides a more
>> efficient way to get the PID, we can change glibc to use it.
>> 
>> More comments about your revised patch tomorrow.
>> 
>
> Right, I referenced a quite old discussion about the pid caching
> and the randomness provided by getpid [1].

It's not about randomness per se, it's about making sure that the
randomness streams, well, fork after a fork system call.  Without it,
parent and child would give the same random bytes in the future.

The main problem is that this does not work reliably once multiple
forks are involved and the randomness pool has been seeded at an
inconvenient time:

<https://www.postgresql.org/message-id/E1UKzBn-0006c6-Ep@gemulon.postgresql.org>

Carlos has a patch to turn pthread_atfork into something that's
available without libpthread.  Maybe we should upstream it and prepare
it for handling clone (and fork from signal handlers).
Florian Weimer Nov. 9, 2016, 12:18 p.m. UTC | #4
On 11/08/2016 08:58 PM, Adhemerval Zanella wrote:

> The tid fields is basically used internally on pthread implementations
> (including getpid) and since correct usage means thread *must* be
> created using pthread_create we are sure the tid field will be
> correctly set due 'set_tid_address' from __pthread_initialize_pids.

Thanks for the explanation.

I really think we should document the clone system call wrapper and 
spell out these requirements, but that's a separate matter.

>> > Please rename to “pid_unused” or something like that, to make sure it's no longer referenced.
> I renamed it on my local branch and I also updated the change spot
> that it incur:
>
> diff --git a/nptl_db/structs.def b/nptl_db/structs.def
> index a9b621b..1cb6a46 100644
> --- a/nptl_db/structs.def
> +++ b/nptl_db/structs.def
> @@ -48,7 +48,6 @@ DB_STRUCT (pthread)
>  DB_STRUCT_FIELD (pthread, list)
>  DB_STRUCT_FIELD (pthread, report_events)
>  DB_STRUCT_FIELD (pthread, tid)
> -DB_STRUCT_FIELD (pthread, pid)
>  DB_STRUCT_FIELD (pthread, start_routine)
>  DB_STRUCT_FIELD (pthread, cancelhandling)
>  DB_STRUCT_FIELD (pthread, schedpolicy)

Have you tested that thread debugging still works after these changes 
(at least on one architecture)?

> The patch also removes the TID caching in clone. My understanding for
> such semantic is try provide some pthread usage after a user program
> issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
> and pthread tid member).  However, as stated before in multiple threads,

“discussion threads”? ☹

> GLIBC provides clone syscalls without further supporting all this
> semantics. It means that, although GLIBC currently tries a better effort,
> since it does not make any more guarantees, specially for newer and newer
> clone flags.

I don't quite understand the above part.

> 	* sysdeps/unix/sysv/linux/getpid.c: Likewise.

This needs updating (file was removed).

I do not have further comments, but I have not reviewed the assembler 
language implementations (only i386/x86_64).  I support the removal of 
PID caching, though.

Thanks,
Florian
Adhemerval Zanella Netto Nov. 15, 2016, 2:26 p.m. UTC | #5
On 09/11/2016 10:18, Florian Weimer wrote:
> On 11/08/2016 08:58 PM, Adhemerval Zanella wrote:
> 
>> The tid fields is basically used internally on pthread implementations
>> (including getpid) and since correct usage means thread *must* be
>> created using pthread_create we are sure the tid field will be
>> correctly set due 'set_tid_address' from __pthread_initialize_pids.
> 
> Thanks for the explanation.
> 
> I really think we should document the clone system call wrapper and spell out these requirements, but that's a separate matter.
> 

Right, I think we can update documentation after patch is upstream.

>>> > Please rename to “pid_unused” or something like that, to make sure it's no longer referenced.
>> I renamed it on my local branch and I also updated the change spot
>> that it incur:
>>
>> diff --git a/nptl_db/structs.def b/nptl_db/structs.def
>> index a9b621b..1cb6a46 100644
>> --- a/nptl_db/structs.def
>> +++ b/nptl_db/structs.def
>> @@ -48,7 +48,6 @@ DB_STRUCT (pthread)
>>  DB_STRUCT_FIELD (pthread, list)
>>  DB_STRUCT_FIELD (pthread, report_events)
>>  DB_STRUCT_FIELD (pthread, tid)
>> -DB_STRUCT_FIELD (pthread, pid)
>>  DB_STRUCT_FIELD (pthread, start_routine)
>>  DB_STRUCT_FIELD (pthread, cancelhandling)
>>  DB_STRUCT_FIELD (pthread, schedpolicy)
> 
> Have you tested that thread debugging still works after these changes (at least on one architecture)?
> 

I just checked with binutils gdb.threads testcase and saw no
regressions.

>> The patch also removes the TID caching in clone. My understanding for
>> such semantic is try provide some pthread usage after a user program
>> issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
>> and pthread tid member).  However, as stated before in multiple threads,
> 
> “discussion threads”? ☹

Ack, I changed it locally.

> 
>> GLIBC provides clone syscalls without further supporting all this
>> semantics. It means that, although GLIBC currently tries a better effort,
>> since it does not make any more guarantees, specially for newer and newer
>> clone flags.
> 
> I don't quite understand the above part.
> 
>>     * sysdeps/unix/sysv/linux/getpid.c: Likewise.
> 
> This needs updating (file was removed).

Ack.

> 
> I do not have further comments, but I have not reviewed the assembler language implementations (only i386/x86_64).  I support the removal of PID caching, though.
> 

I also did a full check on aarch64, powerpc64le, and armhf.  I also did 
some basic tests (basically the posix and nptl one involving clone/fork)
on a simulated sparc{64} and mips{64} machine to check if I missed 
something in clone/vfork assembly changes.
Florian Weimer Nov. 15, 2016, 2:29 p.m. UTC | #6
On 11/15/2016 03:26 PM, Adhemerval Zanella wrote:
> On 09/11/2016 10:18, Florian Weimer wrote:
>>
>> I really think we should document the clone system call wrapper and spell out these requirements, but that's a separate matter.
>>
>
> Right, I think we can update documentation after patch is upstream.

Agreed.

> I also did a full check on aarch64, powerpc64le, and armhf.  I also did
> some basic tests (basically the posix and nptl one involving clone/fork)
> on a simulated sparc{64} and mips{64} machine to check if I missed
> something in clone/vfork assembly changes.

I'm happy with the patch as-is.  I'd suggest to wait another week to see 
if the architecture maintainers have further comments and if not, check 
it in.

Thanks,
Florian
Adhemerval Zanella Netto Nov. 24, 2016, 9:24 p.m. UTC | #7
On 15/11/2016 12:29, Florian Weimer wrote:
> On 11/15/2016 03:26 PM, Adhemerval Zanella wrote:
>> On 09/11/2016 10:18, Florian Weimer wrote:
>>>
>>> I really think we should document the clone system call wrapper and spell out these requirements, but that's a separate matter.
>>>
>>
>> Right, I think we can update documentation after patch is upstream.
> 
> Agreed.
> 
>> I also did a full check on aarch64, powerpc64le, and armhf.  I also did
>> some basic tests (basically the posix and nptl one involving clone/fork)
>> on a simulated sparc{64} and mips{64} machine to check if I missed
>> something in clone/vfork assembly changes.
> 
> I'm happy with the patch as-is.  I'd suggest to wait another week to see if the architecture maintainers have further comments and if not, check it in.

I has been about a week and no architecture maintainer chimed in. I
will commit it shortly.

As before, I rebased and I ran a full make check on x86_64, x32, i686,
armhf, aarch64, and powerpc64le.  I also checked some basic tests on 
sparc{32,64} and mips{32,64} on a simulated system.

So it would require further testing on alpha, hppa, ia64, m68k, nios2,
s390, sh, and tile (I excluded microblaze because it is already
implementing the patch semantic regarding clone/vfork).
Florian Weimer Nov. 25, 2016, 10:50 a.m. UTC | #8
On 11/24/2016 10:24 PM, Adhemerval Zanella wrote:

> As before, I rebased and I ran a full make check on x86_64, x32, i686,
> armhf, aarch64, and powerpc64le.  I also checked some basic tests on
> sparc{32,64} and mips{32,64} on a simulated system.

I've tested s390x and s390 as well, with no regressions.

Thanks,
Florian
diff mbox

Patch

From 410dad3a1795b1f5cf9176e7eb9bc50e1975a680 Mon Sep 17 00:00:00 2001
From: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Mon, 10 Oct 2016 15:08:39 -0300
Subject: [PATCH] Remove cached PID/TID in clone

This patch remove the PID cache and usage in current GLIBC code.  Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:

  - The exposed clone syscall will try to set pid/tid to make the new
    thread somewhat compatible with current GLIBC assumptions.  This cause
    a set of issue with new workloads and usecases (such as BZ#17214 and
    [1]) as well for new internal usage of clone to optimize other algorithms
    (such as clone plus CLONE_VM for posix_spawn, BZ#19957).

  - The caching complexity also added some bugs in the past [2] [3] and
    requires more effort of each port to handle such requirements (for
    both clone and vfork implementation).

  - Caching performance gain in mainly or getpid and some specific
    code paths. The getpid performance leverage is questionable [4],
    either by the idea of getpid being a hotspot as for the getpid
    implementation itself (if it is indeed a justifiable hotspot a
    vDSO symbol could let to a much more simpler solution).

    Other usage is mainly for non usual code paths, such as pthread
    cancellation signal and handling.

For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack
cache and invalidate each element pid.

Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path
(at create_thread), and thread signal (pthread_kill and
pthread_sigqueue).  However these are hardly usual hotspots and I
think adding a syscall is justifiable.

It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:

  - microblaze clone/vfork does not set/reset the pid/tid field
  - hppa uses the default vfork implementation that fallback to fork.
    Since vfork is deprecated I do not think we should bother with it.

The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member).  However, as stated before in multiple threads,
GLIBC provides clone syscalls without further supporting all this
semantics. It means that, although GLIBC currently tries a better effort,
since it does not make any more guarantees, specially for newer and newer
clone flags.

I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system).  So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).

[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html

	* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
	* nptl/allocatestack.c (allocate_stack): Likewise.
	(__reclaim_stacks): Likewise.
	(setxid_signal_thread): Obtain pid through syscall.
	* nptl/nptl-init.c (sigcancel_handler): Likewise.
	(sighandle_setxid): Likewise.
	* nptl/pthread_cancel.c (pthread_cancel): Likewise.
	* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
	* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
	Likewise.
	* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
	* sysdeps/unix/sysv/linux/getpid.c: Likewise.
	* nptl/descr.h (struct pthread): Change comment about pid value.
	* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
	pid assert.
	* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
	Do not set pid value.
	* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
	pid cache check.
	* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
	* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
	* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
	* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
	* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
	* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
	* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
	* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
	struct access.
	(clone_test): Remove function.
	(do_test): Rewrite to take in consideration pid is not cached anymore.
---
 ChangeLog                                         |  78 +++++++++++++++
 nptl/allocatestack.c                              |  20 +---
 nptl/descr.h                                      |   4 +-
 nptl/nptl-init.c                                  |  15 +--
 nptl/pthread_cancel.c                             |  18 +---
 nptl/pthread_getattr_np.c                         |   1 -
 nptl_db/structs.def                               |   1 -
 nptl_db/td_ta_thr_iter.c                          |  56 ++++-------
 nptl_db/td_thr_validate.c                         |  23 -----
 sysdeps/aarch64/nptl/tcb-offsets.sym              |   1 -
 sysdeps/alpha/nptl/tcb-offsets.sym                |   1 -
 sysdeps/arm/nptl/tcb-offsets.sym                  |   1 -
 sysdeps/hppa/nptl/tcb-offsets.sym                 |   1 -
 sysdeps/i386/nptl/tcb-offsets.sym                 |   1 -
 sysdeps/ia64/nptl/tcb-offsets.sym                 |   1 -
 sysdeps/m68k/nptl/tcb-offsets.sym                 |   1 -
 sysdeps/microblaze/nptl/tcb-offsets.sym           |   1 -
 sysdeps/mips/nptl/tcb-offsets.sym                 |   1 -
 sysdeps/nios2/nptl/tcb-offsets.sym                |   1 -
 sysdeps/nptl/fork.c                               |  12 ---
 sysdeps/powerpc/nptl/tcb-offsets.sym              |   1 -
 sysdeps/s390/nptl/tcb-offsets.sym                 |   1 -
 sysdeps/sh/nptl/tcb-offsets.sym                   |   1 -
 sysdeps/sparc/nptl/tcb-offsets.sym                |   1 -
 sysdeps/tile/nptl/tcb-offsets.sym                 |   1 -
 sysdeps/unix/sysv/linux/aarch64/clone.S           |  10 --
 sysdeps/unix/sysv/linux/aarch64/vfork.S           |  17 ----
 sysdeps/unix/sysv/linux/alpha/clone.S             |  16 ----
 sysdeps/unix/sysv/linux/alpha/vfork.S             |  15 ---
 sysdeps/unix/sysv/linux/arm/clone.S               |  10 --
 sysdeps/unix/sysv/linux/arm/vfork.S               |  15 ---
 sysdeps/unix/sysv/linux/createthread.c            |   6 +-
 sysdeps/unix/sysv/linux/getpid.c                  |  64 -------------
 sysdeps/unix/sysv/linux/hppa/clone.S              |  12 ---
 sysdeps/unix/sysv/linux/i386/clone.S              |  15 ---
 sysdeps/unix/sysv/linux/i386/vfork.S              |  19 ----
 sysdeps/unix/sysv/linux/ia64/clone2.S             |  14 +--
 sysdeps/unix/sysv/linux/ia64/vfork.S              |  20 ----
 sysdeps/unix/sysv/linux/m68k/clone.S              |  13 ---
 sysdeps/unix/sysv/linux/m68k/vfork.S              |  20 ----
 sysdeps/unix/sysv/linux/mips/clone.S              |  13 ---
 sysdeps/unix/sysv/linux/mips/vfork.S              |  19 ----
 sysdeps/unix/sysv/linux/nios2/clone.S             |   8 --
 sysdeps/unix/sysv/linux/nios2/vfork.S             |  10 --
 sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S |   9 --
 sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S |  26 -----
 sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S |   9 --
 sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S |  23 -----
 sysdeps/unix/sysv/linux/pthread-pids.h            |   2 +-
 sysdeps/unix/sysv/linux/pthread_kill.c            |  11 +--
 sysdeps/unix/sysv/linux/pthread_sigqueue.c        |  15 +--
 sysdeps/unix/sysv/linux/s390/s390-32/clone.S      |   7 --
 sysdeps/unix/sysv/linux/s390/s390-32/vfork.S      |  12 ---
 sysdeps/unix/sysv/linux/s390/s390-64/clone.S      |   9 --
 sysdeps/unix/sysv/linux/s390/s390-64/vfork.S      |  13 ---
 sysdeps/unix/sysv/linux/sh/clone.S                |  18 +---
 sysdeps/unix/sysv/linux/sh/vfork.S                |  19 ----
 sysdeps/unix/sysv/linux/sparc/sparc32/clone.S     |   7 --
 sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S     |  10 --
 sysdeps/unix/sysv/linux/sparc/sparc64/clone.S     |   7 --
 sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S     |  10 --
 sysdeps/unix/sysv/linux/syscalls.list             |   1 +
 sysdeps/unix/sysv/linux/tile/clone.S              |  16 ----
 sysdeps/unix/sysv/linux/tile/vfork.S              |  28 ------
 sysdeps/unix/sysv/linux/tst-clone2.c              | 111 ++++++++--------------
 sysdeps/unix/sysv/linux/x86_64/clone.S            |   8 --
 sysdeps/unix/sysv/linux/x86_64/vfork.S            |  18 ----
 sysdeps/x86_64/nptl/tcb-offsets.sym               |   1 -
 68 files changed, 162 insertions(+), 787 deletions(-)
 delete mode 100644 sysdeps/unix/sysv/linux/getpid.c

diff --git a/ChangeLog b/ChangeLog
index 2b30e11..50d49d3 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,83 @@ 
 2016-11-08  Adhemerval Zanella  <adhemerval.zanella@linaro.org>
 
+	* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
+	* nptl/allocatestack.c (allocate_stack): Likewise.
+	(__reclaim_stacks): Likewise.
+	(setxid_signal_thread): Obtain pid through syscall.
+	* nptl/nptl-init.c (sigcancel_handler): Likewise.
+	(sighandle_setxid): Likewise.
+	* nptl/pthread_cancel.c (pthread_cancel): Likewise.
+	* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
+	* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
+	Likewise.
+	* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
+	* sysdeps/unix/sysv/linux/getpid.c: Likewise.
+	* nptl/descr.h (struct pthread): Change comment about pid value.
+	* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
+	pid assert.
+	* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
+	Do not set pid value.
+	* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
+	pid cache check.
+	* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
+	* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
+	* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
+	* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
+	* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
+	* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
+	* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
+	* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
+	* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
+	struct access.
+	(clone_test): Remove function.
+	(do_test): Rewrite to take in consideration pid is not cached anymore.
+
+2016-11-08  Adhemerval Zanella  <adhemerval.zanella@linaro.org>
+
 	* nptl/Makefile (libpthread-routines): Remove ptw-llseek and add
 	ptw-lseek64.
 	* sysdeps/unix/sysv/linux/Makefile (sysdeps_routines): Remove llseek.
diff --git a/nptl/allocatestack.c b/nptl/allocatestack.c
index 3016a2e..98a0ea2 100644
--- a/nptl/allocatestack.c
+++ b/nptl/allocatestack.c
@@ -438,9 +438,6 @@  allocate_stack (const struct pthread_attr *attr, struct pthread **pdp,
       SETUP_THREAD_SYSINFO (pd);
 #endif
 
-      /* The process ID is also the same as that of the caller.  */
-      pd->pid = THREAD_GETMEM (THREAD_SELF, pid);
-
       /* Don't allow setxid until cloned.  */
       pd->setxid_futex = -1;
 
@@ -577,9 +574,6 @@  allocate_stack (const struct pthread_attr *attr, struct pthread **pdp,
 	  /* Don't allow setxid until cloned.  */
 	  pd->setxid_futex = -1;
 
-	  /* The process ID is also the same as that of the caller.  */
-	  pd->pid = THREAD_GETMEM (THREAD_SELF, pid);
-
 	  /* Allocate the DTV for this thread.  */
 	  if (_dl_allocate_tls (TLS_TPADJ (pd)) == NULL)
 	    {
@@ -873,9 +867,6 @@  __reclaim_stacks (void)
 	  /* This marks the stack as free.  */
 	  curp->tid = 0;
 
-	  /* The PID field must be initialized for the new process.  */
-	  curp->pid = self->pid;
-
 	  /* Account for the size of the stack.  */
 	  stack_cache_actsize += curp->stackblock_size;
 
@@ -901,13 +892,6 @@  __reclaim_stacks (void)
 	}
     }
 
-  /* Reset the PIDs in any cached stacks.  */
-  list_for_each (runp, &stack_cache)
-    {
-      struct pthread *curp = list_entry (runp, struct pthread, list);
-      curp->pid = self->pid;
-    }
-
   /* Add the stack of all running threads to the cache.  */
   list_splice (&stack_used, &stack_cache);
 
@@ -1052,9 +1036,9 @@  setxid_signal_thread (struct xid_command *cmdp, struct pthread *t)
     return 0;
 
   int val;
+  pid_t pid = __getpid ();
   INTERNAL_SYSCALL_DECL (err);
-  val = INTERNAL_SYSCALL (tgkill, err, 3, THREAD_GETMEM (THREAD_SELF, pid),
-			  t->tid, SIGSETXID);
+  val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, t->tid, SIGSETXID);
 
   /* If this failed, it must have had not started yet or else exited.  */
   if (!INTERNAL_SYSCALL_ERROR_P (val, err))
diff --git a/nptl/descr.h b/nptl/descr.h
index 8e4938d..bc92abf 100644
--- a/nptl/descr.h
+++ b/nptl/descr.h
@@ -167,8 +167,8 @@  struct pthread
      therefore stack) used' flag.  */
   pid_t tid;
 
-  /* Process ID - thread group ID in kernel speak.  */
-  pid_t pid;
+  /* Ununsed.  */
+  pid_t pid_ununsed;
 
   /* List of robust mutexes the thread is holding.  */
 #ifdef __PTHREAD_MUTEX_HAVE_PREV
diff --git a/nptl/nptl-init.c b/nptl/nptl-init.c
index bdbdfed..48fab50 100644
--- a/nptl/nptl-init.c
+++ b/nptl/nptl-init.c
@@ -184,18 +184,12 @@  __nptl_set_robust (struct pthread *self)
 static void
 sigcancel_handler (int sig, siginfo_t *si, void *ctx)
 {
-  /* Determine the process ID.  It might be negative if the thread is
-     in the middle of a fork() call.  */
-  pid_t pid = THREAD_GETMEM (THREAD_SELF, pid);
-  if (__glibc_unlikely (pid < 0))
-    pid = -pid;
-
   /* Safety check.  It would be possible to call this function for
      other signals and send a signal from another process.  This is not
      correct and might even be a security problem.  Try to catch as
      many incorrect invocations as possible.  */
   if (sig != SIGCANCEL
-      || si->si_pid != pid
+      || si->si_pid != __getpid()
       || si->si_code != SI_TKILL)
     return;
 
@@ -243,19 +237,14 @@  struct xid_command *__xidcmd attribute_hidden;
 static void
 sighandler_setxid (int sig, siginfo_t *si, void *ctx)
 {
-  /* Determine the process ID.  It might be negative if the thread is
-     in the middle of a fork() call.  */
-  pid_t pid = THREAD_GETMEM (THREAD_SELF, pid);
   int result;
-  if (__glibc_unlikely (pid < 0))
-    pid = -pid;
 
   /* Safety check.  It would be possible to call this function for
      other signals and send a signal from another process.  This is not
      correct and might even be a security problem.  Try to catch as
      many incorrect invocations as possible.  */
   if (sig != SIGSETXID
-      || si->si_pid != pid
+      || si->si_pid != __getpid ()
       || si->si_code != SI_TKILL)
     return;
 
diff --git a/nptl/pthread_cancel.c b/nptl/pthread_cancel.c
index 1419baf..89d02e1 100644
--- a/nptl/pthread_cancel.c
+++ b/nptl/pthread_cancel.c
@@ -22,7 +22,7 @@ 
 #include "pthreadP.h"
 #include <atomic.h>
 #include <sysdep.h>
-
+#include <unistd.h>
 
 int
 pthread_cancel (pthread_t th)
@@ -66,19 +66,11 @@  pthread_cancel (pthread_t th)
 #ifdef SIGCANCEL
 	  /* The cancellation handler will take care of marking the
 	     thread as canceled.  */
-	  INTERNAL_SYSCALL_DECL (err);
-
-	  /* One comment: The PID field in the TCB can temporarily be
-	     changed (in fork).  But this must not affect this code
-	     here.  Since this function would have to be called while
-	     the thread is executing fork, it would have to happen in
-	     a signal handler.  But this is no allowed, pthread_cancel
-	     is not guaranteed to be async-safe.  */
-	  int val;
-	  val = INTERNAL_SYSCALL (tgkill, err, 3,
-				  THREAD_GETMEM (THREAD_SELF, pid), pd->tid,
-				  SIGCANCEL);
+	  pid_t pid = getpid ();
 
+	  INTERNAL_SYSCALL_DECL (err);
+	  int val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, pd->tid,
+					   SIGCANCEL);
 	  if (INTERNAL_SYSCALL_ERROR_P (val, err))
 	    result = INTERNAL_SYSCALL_ERRNO (val, err);
 #else
diff --git a/nptl/pthread_getattr_np.c b/nptl/pthread_getattr_np.c
index fb906f0..32d7484 100644
--- a/nptl/pthread_getattr_np.c
+++ b/nptl/pthread_getattr_np.c
@@ -68,7 +68,6 @@  pthread_getattr_np (pthread_t thread_id, pthread_attr_t *attr)
     {
       /* No stack information available.  This must be for the initial
 	 thread.  Get the info in some magical way.  */
-      assert (abs (thread->pid) == thread->tid);
 
       /* Stack size limit.  */
       struct rlimit rl;
diff --git a/nptl_db/structs.def b/nptl_db/structs.def
index a9b621b..1cb6a46 100644
--- a/nptl_db/structs.def
+++ b/nptl_db/structs.def
@@ -48,7 +48,6 @@  DB_STRUCT (pthread)
 DB_STRUCT_FIELD (pthread, list)
 DB_STRUCT_FIELD (pthread, report_events)
 DB_STRUCT_FIELD (pthread, tid)
-DB_STRUCT_FIELD (pthread, pid)
 DB_STRUCT_FIELD (pthread, start_routine)
 DB_STRUCT_FIELD (pthread, cancelhandling)
 DB_STRUCT_FIELD (pthread, schedpolicy)
diff --git a/nptl_db/td_ta_thr_iter.c b/nptl_db/td_ta_thr_iter.c
index a990fed..9e50599 100644
--- a/nptl_db/td_ta_thr_iter.c
+++ b/nptl_db/td_ta_thr_iter.c
@@ -76,48 +76,28 @@  iterate_thread_list (td_thragent_t *ta, td_thr_iter_f *callback,
       if (ps_pdread (ta->ph, addr, copy, ta->ta_sizeof_pthread) != PS_OK)
 	return TD_ERR;
 
-      /* Verify that this thread's pid field matches the child PID.
-	 If its pid field is negative, it's about to do a fork or it
-	 is the sole thread in a fork child.  */
-      psaddr_t pid;
-      err = DB_GET_FIELD_LOCAL (pid, ta, copy, pthread, pid, 0);
-      if (err == TD_OK && (pid_t) (uintptr_t) pid < 0)
-	{
-	  if (-(pid_t) (uintptr_t) pid == match_pid)
-	    /* It is about to do a fork, but is really still the parent PID.  */
-	    pid = (psaddr_t) (uintptr_t) match_pid;
-	  else
-	    /* It must be a fork child, whose new PID is in the tid field.  */
-	    err = DB_GET_FIELD_LOCAL (pid, ta, copy, pthread, tid, 0);
-	}
+      err = DB_GET_FIELD_LOCAL (schedpolicy, ta, copy, pthread,
+				schedpolicy, 0);
       if (err != TD_OK)
 	break;
+      err = DB_GET_FIELD_LOCAL (schedprio, ta, copy, pthread,
+				schedparam_sched_priority, 0);
+      if (err != TD_OK)
+	break;
+
+      /* Now test whether this thread matches the specified conditions.  */
 
-      if ((pid_t) (uintptr_t) pid == match_pid)
+      /* Only if the priority level is as high or higher.  */
+      int descr_pri = ((uintptr_t) schedpolicy == SCHED_OTHER
+		       ? 0 : (uintptr_t) schedprio);
+      if (descr_pri >= ti_pri)
 	{
-	  err = DB_GET_FIELD_LOCAL (schedpolicy, ta, copy, pthread,
-				    schedpolicy, 0);
-	  if (err != TD_OK)
-	    break;
-	  err = DB_GET_FIELD_LOCAL (schedprio, ta, copy, pthread,
-				    schedparam_sched_priority, 0);
-	  if (err != TD_OK)
-	    break;
-
-	  /* Now test whether this thread matches the specified conditions.  */
-
-	  /* Only if the priority level is as high or higher.  */
-	  int descr_pri = ((uintptr_t) schedpolicy == SCHED_OTHER
-			   ? 0 : (uintptr_t) schedprio);
-	  if (descr_pri >= ti_pri)
-	    {
-	      /* Yep, it matches.  Call the callback function.  */
-	      td_thrhandle_t th;
-	      th.th_ta_p = (td_thragent_t *) ta;
-	      th.th_unique = addr;
-	      if (callback (&th, cbdata_p) != 0)
-		return TD_DBERR;
-	    }
+	  /* Yep, it matches.  Call the callback function.  */
+	  td_thrhandle_t th;
+	  th.th_ta_p = (td_thragent_t *) ta;
+	  th.th_unique = addr;
+	  if (callback (&th, cbdata_p) != 0)
+	    return TD_DBERR;
 	}
 
       /* Get the pointer to the next element.  */
diff --git a/nptl_db/td_thr_validate.c b/nptl_db/td_thr_validate.c
index f3c8a7b..9b89fec 100644
--- a/nptl_db/td_thr_validate.c
+++ b/nptl_db/td_thr_validate.c
@@ -80,28 +80,5 @@  td_thr_validate (const td_thrhandle_t *th)
 	err = TD_OK;
     }
 
-  if (err == TD_OK)
-    {
-      /* Verify that this is not a stale element in a fork child.  */
-      pid_t match_pid = ps_getpid (th->th_ta_p->ph);
-      psaddr_t pid;
-      err = DB_GET_FIELD (pid, th->th_ta_p, th->th_unique, pthread, pid, 0);
-      if (err == TD_OK && (pid_t) (uintptr_t) pid < 0)
-	{
-	  /* This was a thread that was about to fork, or it is the new sole
-	     thread in a fork child.  In the latter case, its tid was stored
-	     via CLONE_CHILD_SETTID and so is already the proper child PID.  */
-	  if (-(pid_t) (uintptr_t) pid == match_pid)
-	    /* It is about to do a fork, but is really still the parent PID.  */
-	    pid = (psaddr_t) (uintptr_t) match_pid;
-	  else
-	    /* It must be a fork child, whose new PID is in the tid field.  */
-	    err = DB_GET_FIELD (pid, th->th_ta_p, th->th_unique,
-				pthread, tid, 0);
-	}
-      if (err == TD_OK && (pid_t) (uintptr_t) pid != match_pid)
-	err = TD_NOTHR;
-    }
-
   return err;
 }
diff --git a/sysdeps/aarch64/nptl/tcb-offsets.sym b/sysdeps/aarch64/nptl/tcb-offsets.sym
index 0677aea..238647d 100644
--- a/sysdeps/aarch64/nptl/tcb-offsets.sym
+++ b/sysdeps/aarch64/nptl/tcb-offsets.sym
@@ -2,6 +2,5 @@ 
 #include <tls.h>
 
 PTHREAD_MULTIPLE_THREADS_OFFSET		offsetof (struct pthread, header.multiple_threads)
-PTHREAD_PID_OFFSET			offsetof (struct pthread, pid)
 PTHREAD_TID_OFFSET			offsetof (struct pthread, tid)
 PTHREAD_SIZEOF				sizeof (struct pthread)
diff --git a/sysdeps/alpha/nptl/tcb-offsets.sym b/sysdeps/alpha/nptl/tcb-offsets.sym
index c21a791..1005621 100644
--- a/sysdeps/alpha/nptl/tcb-offsets.sym
+++ b/sysdeps/alpha/nptl/tcb-offsets.sym
@@ -10,5 +10,4 @@ 
 #define thread_offsetof(mem)	(long)(offsetof(struct pthread, mem) - sizeof(struct pthread))
 
 MULTIPLE_THREADS_OFFSET		thread_offsetof (header.multiple_threads)
-PID_OFFSET			thread_offsetof (pid)
 TID_OFFSET			thread_offsetof (tid)
diff --git a/sysdeps/arm/nptl/tcb-offsets.sym b/sysdeps/arm/nptl/tcb-offsets.sym
index 92cc441..bf9c0a1 100644
--- a/sysdeps/arm/nptl/tcb-offsets.sym
+++ b/sysdeps/arm/nptl/tcb-offsets.sym
@@ -7,5 +7,4 @@ 
 #define thread_offsetof(mem)	(long)(offsetof(struct pthread, mem) - sizeof(struct pthread))
 
 MULTIPLE_THREADS_OFFSET		thread_offsetof (header.multiple_threads)
-PID_OFFSET			thread_offsetof (pid)
 TID_OFFSET			thread_offsetof (tid)
diff --git a/sysdeps/hppa/nptl/tcb-offsets.sym b/sysdeps/hppa/nptl/tcb-offsets.sym
index c2f326e..6eeed4cb 100644
--- a/sysdeps/hppa/nptl/tcb-offsets.sym
+++ b/sysdeps/hppa/nptl/tcb-offsets.sym
@@ -3,7 +3,6 @@ 
 
 RESULT			offsetof (struct pthread, result)
 TID			offsetof (struct pthread, tid)
-PID			offsetof (struct pthread, pid)
 CANCELHANDLING		offsetof (struct pthread, cancelhandling)
 CLEANUP_JMP_BUF		offsetof (struct pthread, cleanup_jmp_buf)
 MULTIPLE_THREADS_OFFSET	offsetof (struct pthread, header.multiple_threads)
diff --git a/sysdeps/i386/nptl/tcb-offsets.sym b/sysdeps/i386/nptl/tcb-offsets.sym
index 7bdf161..695a810 100644
--- a/sysdeps/i386/nptl/tcb-offsets.sym
+++ b/sysdeps/i386/nptl/tcb-offsets.sym
@@ -4,7 +4,6 @@ 
 
 RESULT			offsetof (struct pthread, result)
 TID			offsetof (struct pthread, tid)
-PID			offsetof (struct pthread, pid)
 CANCELHANDLING		offsetof (struct pthread, cancelhandling)
 CLEANUP_JMP_BUF		offsetof (struct pthread, cleanup_jmp_buf)
 MULTIPLE_THREADS_OFFSET	offsetof (tcbhead_t, multiple_threads)
diff --git a/sysdeps/ia64/nptl/tcb-offsets.sym b/sysdeps/ia64/nptl/tcb-offsets.sym
index e1707ab..b01f712 100644
--- a/sysdeps/ia64/nptl/tcb-offsets.sym
+++ b/sysdeps/ia64/nptl/tcb-offsets.sym
@@ -1,7 +1,6 @@ 
 #include <sysdep.h>
 #include <tls.h>
 
-PID			offsetof (struct pthread, pid) - TLS_PRE_TCB_SIZE
 TID			offsetof (struct pthread, tid) - TLS_PRE_TCB_SIZE
 MULTIPLE_THREADS_OFFSET offsetof (struct pthread, header.multiple_threads) - TLS_PRE_TCB_SIZE
 SYSINFO_OFFSET		offsetof (tcbhead_t, __private)
diff --git a/sysdeps/m68k/nptl/tcb-offsets.sym b/sysdeps/m68k/nptl/tcb-offsets.sym
index b1bba65..241fb8b 100644
--- a/sysdeps/m68k/nptl/tcb-offsets.sym
+++ b/sysdeps/m68k/nptl/tcb-offsets.sym
@@ -7,5 +7,4 @@ 
 #define thread_offsetof(mem)	(long)(offsetof(struct pthread, mem) - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE)
 
 MULTIPLE_THREADS_OFFSET		thread_offsetof (header.multiple_threads)
-PID_OFFSET			thread_offsetof (pid)
 TID_OFFSET			thread_offsetof (tid)
diff --git a/sysdeps/microblaze/nptl/tcb-offsets.sym b/sysdeps/microblaze/nptl/tcb-offsets.sym
index 18afbee..614f0df 100644
--- a/sysdeps/microblaze/nptl/tcb-offsets.sym
+++ b/sysdeps/microblaze/nptl/tcb-offsets.sym
@@ -7,5 +7,4 @@ 
 #define thread_offsetof(mem)	(long)(offsetof (struct pthread, mem) - sizeof (struct pthread))
 
 MULTIPLE_THREADS_OFFSET	thread_offsetof (header.multiple_threads)
-PID_OFFSET			thread_offsetof (pid)
 TID_OFFSET			thread_offsetof (tid)
diff --git a/sysdeps/mips/nptl/tcb-offsets.sym b/sysdeps/mips/nptl/tcb-offsets.sym
index e0e71dc..9ea25b9 100644
--- a/sysdeps/mips/nptl/tcb-offsets.sym
+++ b/sysdeps/mips/nptl/tcb-offsets.sym
@@ -7,5 +7,4 @@ 
 #define thread_offsetof(mem)	(long)(offsetof(struct pthread, mem) - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE)
 
 MULTIPLE_THREADS_OFFSET		thread_offsetof (header.multiple_threads)
-PID_OFFSET			thread_offsetof (pid)
 TID_OFFSET			thread_offsetof (tid)
diff --git a/sysdeps/nios2/nptl/tcb-offsets.sym b/sysdeps/nios2/nptl/tcb-offsets.sym
index d9ae952..3cd8d98 100644
--- a/sysdeps/nios2/nptl/tcb-offsets.sym
+++ b/sysdeps/nios2/nptl/tcb-offsets.sym
@@ -9,6 +9,5 @@ 
 # define thread_offsetof(mem)   ((ptrdiff_t) THREAD_SELF + offsetof (struct pthread, mem))
 
 MULTIPLE_THREADS_OFFSET		thread_offsetof (header.multiple_threads)
-PID_OFFSET			thread_offsetof (pid)
 TID_OFFSET			thread_offsetof (tid)
 POINTER_GUARD			(offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t))
diff --git a/sysdeps/nptl/fork.c b/sysdeps/nptl/fork.c
index ea135f8..32cecce 100644
--- a/sysdeps/nptl/fork.c
+++ b/sysdeps/nptl/fork.c
@@ -135,12 +135,6 @@  __libc_fork (void)
   pid_t ppid = THREAD_GETMEM (THREAD_SELF, tid);
 #endif
 
-  /* We need to prevent the getpid() code to update the PID field so
-     that, if a signal arrives in the child very early and the signal
-     handler uses getpid(), the value returned is correct.  */
-  pid_t parentpid = THREAD_GETMEM (THREAD_SELF, pid);
-  THREAD_SETMEM (THREAD_SELF, pid, -parentpid);
-
 #ifdef ARCH_FORK
   pid = ARCH_FORK ();
 #else
@@ -159,9 +153,6 @@  __libc_fork (void)
       if (__fork_generation_pointer != NULL)
 	*__fork_generation_pointer += __PTHREAD_ONCE_FORK_GEN_INCR;
 
-      /* Adjust the PID field for the new process.  */
-      THREAD_SETMEM (self, pid, THREAD_GETMEM (self, tid));
-
 #if HP_TIMING_AVAIL
       /* The CPU clock of the thread and process have to be set to zero.  */
       hp_timing_t now;
@@ -233,9 +224,6 @@  __libc_fork (void)
     {
       assert (THREAD_GETMEM (THREAD_SELF, tid) == ppid);
 
-      /* Restore the PID value.  */
-      THREAD_SETMEM (THREAD_SELF, pid, parentpid);
-
       /* Release acquired locks in the multi-threaded case.  */
       if (multiple_threads)
 	{
diff --git a/sysdeps/powerpc/nptl/tcb-offsets.sym b/sysdeps/powerpc/nptl/tcb-offsets.sym
index f580e69..7c9fd33 100644
--- a/sysdeps/powerpc/nptl/tcb-offsets.sym
+++ b/sysdeps/powerpc/nptl/tcb-offsets.sym
@@ -13,7 +13,6 @@ 
 #if TLS_MULTIPLE_THREADS_IN_TCB
 MULTIPLE_THREADS_OFFSET		thread_offsetof (header.multiple_threads)
 #endif
-PID				thread_offsetof (pid)
 TID				thread_offsetof (tid)
 POINTER_GUARD			(offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t))
 TAR_SAVE			(offsetof (tcbhead_t, tar_save) - TLS_TCB_OFFSET - sizeof (tcbhead_t))
diff --git a/sysdeps/s390/nptl/tcb-offsets.sym b/sysdeps/s390/nptl/tcb-offsets.sym
index 9cfae21..9c1c01f 100644
--- a/sysdeps/s390/nptl/tcb-offsets.sym
+++ b/sysdeps/s390/nptl/tcb-offsets.sym
@@ -3,5 +3,4 @@ 
 
 MULTIPLE_THREADS_OFFSET		offsetof (tcbhead_t, multiple_threads)
 STACK_GUARD			offsetof (tcbhead_t, stack_guard)
-PID				offsetof (struct pthread, pid)
 TID				offsetof (struct pthread, tid)
diff --git a/sysdeps/sh/nptl/tcb-offsets.sym b/sysdeps/sh/nptl/tcb-offsets.sym
index ac63b5b..4963e15 100644
--- a/sysdeps/sh/nptl/tcb-offsets.sym
+++ b/sysdeps/sh/nptl/tcb-offsets.sym
@@ -4,7 +4,6 @@ 
 
 RESULT			offsetof (struct pthread, result)
 TID			offsetof (struct pthread, tid)
-PID			offsetof (struct pthread, pid)
 CANCELHANDLING		offsetof (struct pthread, cancelhandling)
 CLEANUP_JMP_BUF		offsetof (struct pthread, cleanup_jmp_buf)
 MULTIPLE_THREADS_OFFSET	offsetof (struct pthread, header.multiple_threads)
diff --git a/sysdeps/sparc/nptl/tcb-offsets.sym b/sysdeps/sparc/nptl/tcb-offsets.sym
index 923af8a..f75d020 100644
--- a/sysdeps/sparc/nptl/tcb-offsets.sym
+++ b/sysdeps/sparc/nptl/tcb-offsets.sym
@@ -3,5 +3,4 @@ 
 
 MULTIPLE_THREADS_OFFSET		offsetof (tcbhead_t, multiple_threads)
 POINTER_GUARD			offsetof (tcbhead_t, pointer_guard)
-PID				offsetof (struct pthread, pid)
 TID				offsetof (struct pthread, tid)
diff --git a/sysdeps/tile/nptl/tcb-offsets.sym b/sysdeps/tile/nptl/tcb-offsets.sym
index 6740bc9..0147ffa 100644
--- a/sysdeps/tile/nptl/tcb-offsets.sym
+++ b/sysdeps/tile/nptl/tcb-offsets.sym
@@ -9,7 +9,6 @@ 
 #define thread_offsetof(mem)	(long)(offsetof(struct pthread, mem) - TLS_TCB_OFFSET - TLS_PRE_TCB_SIZE)
 
 MULTIPLE_THREADS_OFFSET		thread_offsetof (header.multiple_threads)
-PID_OFFSET			thread_offsetof (pid)
 TID_OFFSET			thread_offsetof (tid)
 POINTER_GUARD			(offsetof (tcbhead_t, pointer_guard) - TLS_TCB_OFFSET - sizeof (tcbhead_t))
 FEEDBACK_DATA_OFFSET		(offsetof (tcbhead_t, feedback_data) - TLS_TCB_OFFSET - sizeof (tcbhead_t))
diff --git a/sysdeps/unix/sysv/linux/aarch64/clone.S b/sysdeps/unix/sysv/linux/aarch64/clone.S
index 76baa7a..96482e5 100644
--- a/sysdeps/unix/sysv/linux/aarch64/clone.S
+++ b/sysdeps/unix/sysv/linux/aarch64/clone.S
@@ -72,16 +72,6 @@  thread_start:
 	cfi_undefined (x30)
 	mov	x29, 0
 
-	tbnz	x11, #CLONE_VM_BIT, 1f
-
-	mov	x8, #SYS_ify(getpid)
-	svc	0x0
-	mrs	x1, tpidr_el0
-	sub	x1, x1, #PTHREAD_SIZEOF
-	str	w0, [x1, #PTHREAD_PID_OFFSET]
-	str	w0, [x1, #PTHREAD_TID_OFFSET]
-1:
-
 	/* Pick the function arg and execute.  */
 	mov	x0, x12
 	blr	x10
diff --git a/sysdeps/unix/sysv/linux/aarch64/vfork.S b/sysdeps/unix/sysv/linux/aarch64/vfork.S
index 577895e..aeed0b2 100644
--- a/sysdeps/unix/sysv/linux/aarch64/vfork.S
+++ b/sysdeps/unix/sysv/linux/aarch64/vfork.S
@@ -27,27 +27,10 @@ 
 
 ENTRY (__vfork)
 
-	/* Save the TCB-cached PID away in w3, and then negate the TCB
-           field.  But if it's zero, set it to 0x80000000 instead.  See
-           raise.c for the logic that relies on this value.  */
-	mrs	x2, tpidr_el0
-	sub	x2, x2, #PTHREAD_SIZEOF
-	ldr	w3, [x2, #PTHREAD_PID_OFFSET]
-	mov	w1, #0x80000000
-	negs	w0, w3
-	csel	w0, w1, w0, eq
-	str	w0, [x2, #PTHREAD_PID_OFFSET]
-
 	mov	x0, #0x4111	/* CLONE_VM | CLONE_VFORK | SIGCHLD */
 	mov	x1, sp
 	DO_CALL (clone, 2)
 
-	/* Restore the original value of the TCB cache of the PID, if we're
-	   the parent.  But in the child (syscall return value equals zero),
-	   leave things as they are.  */
-	cbz	x0, 1f
-	str	w3, [x2, #PTHREAD_PID_OFFSET]
-1:
 	cmn	x0, #4095
 	b.cs    .Lsyscall_error
 	RET
diff --git a/sysdeps/unix/sysv/linux/alpha/clone.S b/sysdeps/unix/sysv/linux/alpha/clone.S
index 6a3154f..2757bf2 100644
--- a/sysdeps/unix/sysv/linux/alpha/clone.S
+++ b/sysdeps/unix/sysv/linux/alpha/clone.S
@@ -91,13 +91,6 @@  thread_start:
 	cfi_def_cfa_register(fp)
 	cfi_undefined(ra)
 
-	/* Check and see if we need to reset the PID.  */
-	ldq	t0, 16(sp)
-	lda	t1, CLONE_VM
-	and	t0, t1, t2
-	beq	t2, 2f
-1:
-
 	/* Load up the arguments.  */
 	ldq	pv, 0(sp)
 	ldq	a0, 8(sp)
@@ -120,15 +113,6 @@  thread_start:
 	halt
 
 	.align	4
-2:
-	rduniq
-	mov	v0, s0
-	lda	v0, __NR_getxpid
-	callsys
-3:
-	stl	v0, PID_OFFSET(s0)
-	stl	v0, TID_OFFSET(s0)
-	br	1b
 	cfi_endproc
 	.end thread_start
 
diff --git a/sysdeps/unix/sysv/linux/alpha/vfork.S b/sysdeps/unix/sysv/linux/alpha/vfork.S
index 9fc199a..e5f7ed0 100644
--- a/sysdeps/unix/sysv/linux/alpha/vfork.S
+++ b/sysdeps/unix/sysv/linux/alpha/vfork.S
@@ -25,24 +25,9 @@  ENTRY(__libc_vfork)
 	rduniq
 	mov	v0, a1
 
-	/* Save the TCB-cached PID away in A2, and then negate the TCB
-           field.  But if it's zero, set it to 0x80000000 instead.  See
-           raise.c for the logic that relies on this value.  */
-	ldl	a2, PID_OFFSET(v0)
-	ldah	t0, -0x8000
-	negl	a2, t1
-	cmovne	a2, t1, t0
-	stl	t0, PID_OFFSET(v0);
-
 	lda	v0, SYS_ify(vfork)
 	call_pal PAL_callsys
 
-	/* Restore the original value of the TCB cache of the PID, if we're
-	   the parent.  But in the child (syscall return value equals zero),
-	   leave things as they are.  */
-	beq	v0, 1f
-	stl	a2, PID_OFFSET(a1)
-1:
 	/* Normal error check and return.  */
 	bne	a3, SYSCALL_ERROR_LABEL
 	ret
diff --git a/sysdeps/unix/sysv/linux/arm/clone.S b/sysdeps/unix/sysv/linux/arm/clone.S
index 7ff6818..4c6325d 100644
--- a/sysdeps/unix/sysv/linux/arm/clone.S
+++ b/sysdeps/unix/sysv/linux/arm/clone.S
@@ -70,16 +70,6 @@  PSEUDO_END (__clone)
 1:
 	.fnstart
 	.cantunwind
-	tst	ip, #CLONE_VM
-	bne	2f
-	GET_TLS (lr)
-	mov	r1, r0
-	ldr	r7, =SYS_ify(getpid)
-	swi	0x0
-	NEGOFF_ADJ_BASE (r1, TID_OFFSET)
-	str	r0, NEGOFF_OFF1 (r1, TID_OFFSET)
-	str	r0, NEGOFF_OFF2 (r1, PID_OFFSET, TID_OFFSET)
-2:
 	@ pick the function arg and call address off the stack and execute
 	ldr	r0, [sp, #4]
 	ldr 	ip, [sp], #8
diff --git a/sysdeps/unix/sysv/linux/arm/vfork.S b/sysdeps/unix/sysv/linux/arm/vfork.S
index 500f5ca..794372e 100644
--- a/sysdeps/unix/sysv/linux/arm/vfork.S
+++ b/sysdeps/unix/sysv/linux/arm/vfork.S
@@ -28,16 +28,6 @@ 
    and the process ID of the new process to the old process.  */
 
 ENTRY (__vfork)
-	/* Save the PID value.  */
-	GET_TLS (r2)
-	NEGOFF_ADJ_BASE2 (r2, r0, PID_OFFSET) /* Save the TLS addr in r2.  */
-	ldr	r3, NEGOFF_OFF1 (r2, PID_OFFSET) /* Load the saved PID.  */
-	rsbs	r0, r3, #0		/* Negate it, and test for zero.  */
-	/* Use 0x80000000 if it was 0.  See raise.c for how this is used.  */
-	it	eq
-	moveq	r0, #0x80000000
-	str	r0, NEGOFF_OFF1 (r2, PID_OFFSET) /* Store the temp PID.  */
-
 	/* The DO_CALL macro saves r7 on the stack, to enable generation
 	   of ARM unwind info.  Since the stack is initially shared between
 	   parent and child of vfork, that saved value could be corrupted.
@@ -57,11 +47,6 @@  ENTRY (__vfork)
 	mov	r7, ip
 	cfi_restore (r7)
 
-	/* Restore the old PID value in the parent.  */
-	cmp	r0, #0		/* If we are the parent... */
-	it	ne
-	strne	r3, NEGOFF_OFF1 (r2, PID_OFFSET) /* restore the saved PID.  */
-
 	cmn	a1, #4096
 	it	cc
 	RETINSTR(cc, lr)
diff --git a/sysdeps/unix/sysv/linux/createthread.c b/sysdeps/unix/sysv/linux/createthread.c
index 6d32cec..ec86f50 100644
--- a/sysdeps/unix/sysv/linux/createthread.c
+++ b/sysdeps/unix/sysv/linux/createthread.c
@@ -128,10 +128,10 @@  create_thread (struct pthread *pd, const struct pthread_attr *attr,
 	      /* The operation failed.  We have to kill the thread.
 		 We let the normal cancellation mechanism do the work.  */
 
+	      pid_t pid = __getpid ();
 	      INTERNAL_SYSCALL_DECL (err2);
-	      (void) INTERNAL_SYSCALL (tgkill, err2, 3,
-				       THREAD_GETMEM (THREAD_SELF, pid),
-				       pd->tid, SIGCANCEL);
+	      (void) INTERNAL_SYSCALL_CALL (tgkill, err2, pid, pd->tid,
+					    SIGCANCEL);
 
 	      return INTERNAL_SYSCALL_ERRNO (res, err);
 	    }
diff --git a/sysdeps/unix/sysv/linux/getpid.c b/sysdeps/unix/sysv/linux/getpid.c
deleted file mode 100644
index 1124549..0000000
--- a/sysdeps/unix/sysv/linux/getpid.c
+++ /dev/null
@@ -1,64 +0,0 @@ 
-/* Copyright (C) 2003-2016 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by Ulrich Drepper <drepper@redhat.com>, 2003.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, see
-   <http://www.gnu.org/licenses/>.  */
-
-#include <unistd.h>
-#include <tls.h>
-#include <sysdep.h>
-
-
-#if IS_IN (libc)
-static inline __attribute__((always_inline)) pid_t really_getpid (pid_t oldval);
-
-static inline __attribute__((always_inline)) pid_t
-really_getpid (pid_t oldval)
-{
-  if (__glibc_likely (oldval == 0))
-    {
-      pid_t selftid = THREAD_GETMEM (THREAD_SELF, tid);
-      if (__glibc_likely (selftid != 0))
-	return selftid;
-    }
-
-  INTERNAL_SYSCALL_DECL (err);
-  pid_t result = INTERNAL_SYSCALL (getpid, err, 0);
-
-  /* We do not set the PID field in the TID here since we might be
-     called from a signal handler while the thread executes fork.  */
-  if (oldval == 0)
-    THREAD_SETMEM (THREAD_SELF, tid, result);
-  return result;
-}
-#endif
-
-pid_t
-__getpid (void)
-{
-#if !IS_IN (libc)
-  INTERNAL_SYSCALL_DECL (err);
-  pid_t result = INTERNAL_SYSCALL (getpid, err, 0);
-#else
-  pid_t result = THREAD_GETMEM (THREAD_SELF, pid);
-  if (__glibc_unlikely (result <= 0))
-    result = really_getpid (result);
-#endif
-  return result;
-}
-
-libc_hidden_def (__getpid)
-weak_alias (__getpid, getpid)
-libc_hidden_def (getpid)
diff --git a/sysdeps/unix/sysv/linux/hppa/clone.S b/sysdeps/unix/sysv/linux/hppa/clone.S
index 3d037f1..25fcd49 100644
--- a/sysdeps/unix/sysv/linux/hppa/clone.S
+++ b/sysdeps/unix/sysv/linux/hppa/clone.S
@@ -132,18 +132,6 @@  ENTRY(__clone)
 	ldwm	-64(%sp), %r4
 
 .LthreadStart:
-# define CLONE_VM_BIT		23	/* 0x00000100  */
-	/* Load original clone flags.
-	   If CLONE_VM was passed, don't modify PID/TID.
-	   Otherwise store the result of getpid to PID/TID.  */
-	ldw	-56(%sp), %r26
-	bb,<,n	%r26, CLONE_VM_BIT, 1f
-	ble     0x100(%sr2, %r0)
-	ldi	__NR_getpid, %r20
-	mfctl	%cr27, %r26
-	stw	%ret0, PID_THREAD_OFFSET(%r26)
-	stw	%ret0, TID_THREAD_OFFSET(%r26)
-1:
 	/* Load up the arguments.  */
 	ldw	-60(%sp), %arg0
 	ldw     -64(%sp), %r22
diff --git a/sysdeps/unix/sysv/linux/i386/clone.S b/sysdeps/unix/sysv/linux/i386/clone.S
index 25f2a9c..feae504 100644
--- a/sysdeps/unix/sysv/linux/i386/clone.S
+++ b/sysdeps/unix/sysv/linux/i386/clone.S
@@ -107,9 +107,6 @@  L(thread_start):
 	cfi_undefined (eip);
 	/* Note: %esi is zero.  */
 	movl	%esi,%ebp	/* terminate the stack frame */
-	testl	$CLONE_VM, %edi
-	je	L(newpid)
-L(haspid):
 	call	*%ebx
 #ifdef PIC
 	call	L(here)
@@ -121,18 +118,6 @@  L(here):
 	movl	$SYS_ify(exit), %eax
 	ENTER_KERNEL
 
-	.subsection 2
-L(newpid):
-	movl	$SYS_ify(getpid), %eax
-	ENTER_KERNEL
-L(nomoregetpid):
-	movl	%eax, %gs:PID
-	movl	%eax, %gs:TID
-	jmp	L(haspid)
-	.previous
-	cfi_endproc;
-
-	cfi_startproc
 PSEUDO_END (__clone)
 
 libc_hidden_def (__clone)
diff --git a/sysdeps/unix/sysv/linux/i386/vfork.S b/sysdeps/unix/sysv/linux/i386/vfork.S
index 7a1d337..a865de2 100644
--- a/sysdeps/unix/sysv/linux/i386/vfork.S
+++ b/sysdeps/unix/sysv/linux/i386/vfork.S
@@ -34,17 +34,6 @@  ENTRY (__vfork)
 	cfi_adjust_cfa_offset (-4)
 	cfi_register (%eip, %ecx)
 
-	/* Save the TCB-cached PID away in %edx, and then negate the TCB
-           field.  But if it's zero, set it to 0x80000000 instead.  See
-           raise.c for the logic that relies on this value.  */
-	movl	%gs:PID, %edx
-	movl	%edx, %eax
-	negl	%eax
-	jne	1f
-	movl	$0x80000000, %eax
-1:	movl	%eax, %gs:PID
-
-
 	/* Stuff the syscall number in EAX and enter into the kernel.  */
 	movl	$SYS_ify (vfork), %eax
 	int	$0x80
@@ -55,14 +44,6 @@  ENTRY (__vfork)
 	pushl	%ecx
 	cfi_adjust_cfa_offset (4)
 
-	/* Restore the original value of the TCB cache of the PID, if we're
-	   the parent.  But in the child (syscall return value equals zero),
-	   leave things as they are.  */
-	testl	%eax, %eax
-	je	1f
-	movl	%edx, %gs:PID
-1:
-
 	cmpl	$-4095, %eax
 	/* Branch forward if it failed.  */
 	jae	SYSCALL_ERROR_LABEL
diff --git a/sysdeps/unix/sysv/linux/ia64/clone2.S b/sysdeps/unix/sysv/linux/ia64/clone2.S
index b4cfdfc..e637b6d 100644
--- a/sysdeps/unix/sysv/linux/ia64/clone2.S
+++ b/sysdeps/unix/sysv/linux/ia64/clone2.S
@@ -67,19 +67,7 @@  ENTRY(__clone2)
 (CHILD)	mov loc0=gp
 (PARENT) ret
 	;;
-	tbit.nz p6,p0=in3,8	/* CLONE_VM */
-(p6)	br.cond.dptk 1f
-	;;
-	mov r15=SYS_ify (getpid)
-(p7)	break __BREAK_SYSCALL
-	;;
-	add r9=PID,r13
-	add r10=TID,r13
-	;;
-	st4 [r9]=r8
-	st4 [r10]=r8
-	;;
-1:	ld8 out1=[in0],8	/* Retrieve code pointer.	*/
+	ld8 out1=[in0],8	/* Retrieve code pointer.	*/
 	mov out0=in4		/* Pass proper argument	to fn */
 	;;
 	ld8 gp=[in0]		/* Load function gp.		*/
diff --git a/sysdeps/unix/sysv/linux/ia64/vfork.S b/sysdeps/unix/sysv/linux/ia64/vfork.S
index 9154d7c..84bfdd5 100644
--- a/sysdeps/unix/sysv/linux/ia64/vfork.S
+++ b/sysdeps/unix/sysv/linux/ia64/vfork.S
@@ -33,32 +33,12 @@  ENTRY (__libc_vfork)
 	.prologue	// work around a GAS bug which triggers if
 	.body		// first .prologue is not at the beginning of proc.
 	alloc r2=ar.pfs,0,0,2,0
-	adds r14=PID,r13
-	;;
-	ld4 r16=[r14]
-	;;
-	sub r15=0,r16
-	cmp.eq p6,p0=0,r16
-	;;
-(p6)	movl r15=0x80000000
 	mov out0=CLONE_VM+CLONE_VFORK+SIGCHLD
 	mov out1=0		/* Standard sp value.			*/
 	;;
-	st4 [r14]=r15
 	DO_CALL (SYS_ify (clone))
 	cmp.eq p6,p0=0,r8
-	adds r14=PID,r13
 (p6)	br.cond.dptk 1f
-	;;
-	ld4 r15=[r14]
-	;;
-	extr.u r16=r15,0,31
-	;;
-	cmp.eq p0,p6=0,r16
-	;;
-(p6)	sub r16=0,r15
-	;;
-	st4 [r14]=r16
 1:
 	cmp.eq p6,p0=-1,r10
 (p6)	br.cond.spnt.few __syscall_error
diff --git a/sysdeps/unix/sysv/linux/m68k/clone.S b/sysdeps/unix/sysv/linux/m68k/clone.S
index 3a82844..630a292 100644
--- a/sysdeps/unix/sysv/linux/m68k/clone.S
+++ b/sysdeps/unix/sysv/linux/m68k/clone.S
@@ -98,19 +98,6 @@  ENTRY (__clone)
 	cfi_startproc
 	cfi_undefined (pc)	/* Mark end of stack */
 	subl	%fp, %fp	/* terminate the stack frame */
-	/* Check and see if we need to reset the PID.  */
-	andl	#CLONE_VM, %d1
-	jne	1f
-	movel	#SYS_ify (getpid), %d0
-	trap	#0
-	movel	%a0, -(%sp)
-	movel	%d0, -(%sp)
-	bsrl	__m68k_read_tp@PLTPC
-	movel	(%sp)+, %d0
-	movel	%d0, PID_OFFSET(%a0)
-	movel	%d0, TID_OFFSET(%a0)
-	movel	(%sp)+, %a0
-1:
 	jsr	(%a0)
 	movel	%d0, %d1
 	movel	#SYS_ify (exit), %d0
diff --git a/sysdeps/unix/sysv/linux/m68k/vfork.S b/sysdeps/unix/sysv/linux/m68k/vfork.S
index 1625a7b..e274793 100644
--- a/sysdeps/unix/sysv/linux/m68k/vfork.S
+++ b/sysdeps/unix/sysv/linux/m68k/vfork.S
@@ -28,18 +28,6 @@ 
 
 ENTRY (__vfork)
 
-	/* Save the TCB-cached PID away in %d1, and then negate the TCB
-	   field.  But if it's zero, set it to 0x80000000 instead.  See
-	   raise.c for the logic that relies on this value.  */
-	jbsr	__m68k_read_tp@PLTPC
-	movel	%a0, %a1
-	movel	PID_OFFSET(%a1), %d0
-	movel	%d0, %d1
-	negl	%d0
-	jne	1f
-	movel	#0x80000000, %d0
-1:	movel	%d0, PID_OFFSET(%a1)
-
 	/* Pop the return PC value into A0.  */
 	movel	%sp@+, %a0
 	cfi_adjust_cfa_offset (-4)
@@ -49,14 +37,6 @@  ENTRY (__vfork)
 	movel	#SYS_ify (vfork), %d0
 	trap	#0
 
-	/* Restore the original value of the TCB cache of the PID, if we're
-	   the parent.  But in the child (syscall return value equals zero),
-	   leave things as they are.  */
-	tstl	%d0
-	jeq	1f
-	movel	%d1, PID_OFFSET(%a1)
-1:
-
 	tstl	%d0
 	jmi	.Lerror		/* Branch forward if it failed.  */
 
diff --git a/sysdeps/unix/sysv/linux/mips/clone.S b/sysdeps/unix/sysv/linux/mips/clone.S
index 39634c5..7ae65ef 100644
--- a/sysdeps/unix/sysv/linux/mips/clone.S
+++ b/sysdeps/unix/sysv/linux/mips/clone.S
@@ -130,11 +130,6 @@  L(thread_start):
 	SAVE_GP (GPOFF)
 	/* The stackframe has been created on entry of clone().  */
 
-	/* Check and see if we need to reset the PID.  */
-	and	a1,a0,CLONE_VM
-	beqz	a1,L(restore_pid)
-L(donepid):
-
 	/* Restore the arg for user's function.  */
 	PTR_L		t9,0(sp)	/* Function pointer.  */
 	PTR_L		a0,PTRSIZE(sp)	/* Argument pointer.  */
@@ -151,14 +146,6 @@  L(donepid):
 	jal		_exit
 #endif
 
-L(restore_pid):
-	li		v0,__NR_getpid
-	syscall
-	READ_THREAD_POINTER(v1)
-	INT_S		v0,PID_OFFSET(v1)
-	INT_S		v0,TID_OFFSET(v1)
-	b		L(donepid)
-
 	END(__thread_start)
 
 libc_hidden_def (__clone)
diff --git a/sysdeps/unix/sysv/linux/mips/vfork.S b/sysdeps/unix/sysv/linux/mips/vfork.S
index 1867c86..0b9244b 100644
--- a/sysdeps/unix/sysv/linux/mips/vfork.S
+++ b/sysdeps/unix/sysv/linux/mips/vfork.S
@@ -60,14 +60,6 @@  NESTED(__libc_vfork,FRAMESZ,sp)
 	PTR_ADDU	sp, FRAMESZ
 	cfi_adjust_cfa_offset (-FRAMESZ)
 
-	/* Save the PID value.  */
-	READ_THREAD_POINTER(v1)	   /* Get the thread pointer.  */
-	lw	a2, PID_OFFSET(v1) /* Load the saved PID.  */
-	subu	a2, $0, a2	   /* Negate it.  */
-	bnez	a2, 1f		   /* If it was zero... */
-	lui	a2, 0x8000	   /* use 0x80000000 instead.  */
-1:	sw	a2, PID_OFFSET(v1) /* Store the temporary PID.  */
-
 	li		a0, 0x4112	/* CLONE_VM | CLONE_VFORK | SIGCHLD */
 	move		a1, sp
 
@@ -75,17 +67,6 @@  NESTED(__libc_vfork,FRAMESZ,sp)
 	li		v0,__NR_clone
 	syscall
 
-	/* Restore the old PID value in the parent.  */
-	beqz	v0, 1f		/* If we are the parent... */
-	READ_THREAD_POINTER(v1)	/* Get the thread pointer.  */
-	lw	a2, PID_OFFSET(v1) /* Load the saved PID.  */
-	subu	a2, $0, a2	   /* Re-negate it.  */
-	lui	a0, 0x8000	   /* Load 0x80000000... */
-	bne	a2, a0, 2f	   /* ... compare against it... */
-	li	a2, 0		   /* ... use 0 instead.  */
-2:	sw	a2, PID_OFFSET(v1) /* Restore the PID.  */
-1:
-
 	cfi_remember_state
 	bnez		a3,L(error)
 
diff --git a/sysdeps/unix/sysv/linux/nios2/clone.S b/sysdeps/unix/sysv/linux/nios2/clone.S
index 30b6e4a..c9fa00f 100644
--- a/sysdeps/unix/sysv/linux/nios2/clone.S
+++ b/sysdeps/unix/sysv/linux/nios2/clone.S
@@ -68,14 +68,6 @@  thread_start:
 	cfi_startproc
 	cfi_undefined (ra)
 
-	/* We expect the argument registers to be preserved across system
-	   calls and across task cloning, so flags should be in r4 here.  */
-	andi	r2, r4, CLONE_VM
-	bne	r2, zero, 2f
-        DO_CALL (getpid, 0)
-	stw	r2, PID_OFFSET(r23)
-	stw	r2, TID_OFFSET(r23)
-2:
 	ldw	r5, 4(sp)	/* Function pointer.  */
 	ldw	r4, 0(sp)	/* Argument pointer.  */
 	addi	sp, sp, 8
diff --git a/sysdeps/unix/sysv/linux/nios2/vfork.S b/sysdeps/unix/sysv/linux/nios2/vfork.S
index c1bb9c7..8997269 100644
--- a/sysdeps/unix/sysv/linux/nios2/vfork.S
+++ b/sysdeps/unix/sysv/linux/nios2/vfork.S
@@ -21,20 +21,10 @@ 
 
 ENTRY(__vfork)
 
-	ldw	r6, PID_OFFSET(r23)
-	sub	r7, zero, r6
-	bne	r7, zero, 2f
-	movhi	r7, %hi(0x80000000)
-2:
-	stw	r7, PID_OFFSET(r23)
-
 	movi	r4, 0x4111 /* (CLONE_VM | CLONE_VFORK | SIGCHLD) */
 	mov	r5, zero
 	DO_CALL (clone, 2)
 
-	beq	r2, zero, 1f
-	stw	r6, PID_OFFSET(r23)
-1:
 	bne	r7, zero, SYSCALL_ERROR_LABEL
 	ret
 
diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S b/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S
index bebadbf..49fe01e 100644
--- a/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S
+++ b/sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S
@@ -76,15 +76,6 @@  ENTRY (__clone)
 	crandc	cr1*4+eq,cr1*4+eq,cr0*4+so
 	bne-	cr1,L(parent)		/* The '-' is to minimise the race.  */
 
-	/* If CLONE_VM is set do not update the pid/tid field.  */
-	andi.	r0,r28,CLONE_VM
-	bne+	cr0,L(oldpid)
-
-	DO_CALL(SYS_ify(getpid))
-	stw	r3,TID(r2)
-	stw	r3,PID(r2)
-L(oldpid):
-
 	/* Call procedure.  */
 	mtctr	r30
 	mr	r3,r31
diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S b/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S
index edbc7de..0a72495 100644
--- a/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S
+++ b/sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S
@@ -27,34 +27,8 @@ 
 
 ENTRY (__vfork)
 
-	/* Load the TCB-cached PID value and negates it. If It it is zero
-	   sets it to 0x800000.  And then sets its value again on TCB field.
-	   See raise.c for the logic that relies on this value.  */
-
-	lwz	r0,PID(r2)
-	cmpwi	cr0,r0,0
-	neg	r0,r0
-	bne-	cr0,1f
-	lis	r0,0x8000
-1:	stw	r0,PID(r2)
-
 	DO_CALL (SYS_ify (vfork))
 
-	cmpwi	cr1,r3,0
-	beqlr-	1
-
-	/* Restore the original value of the TCB cache of the PID, if we're
-	   the parent.  But in the child (syscall return value equals zero),
-	   leave things as they are.  */
-	lwz	r0,PID(r2)
-	/* Cannot use clrlwi. here, because cr0 needs to be preserved
-	   until PSEUDO_RET.  */
-	clrlwi	r4,r0,1
-	cmpwi	cr1,r4,0
-	beq-	cr1,1f
-	neg	r4,r0
-1:	stw	r4,PID(r2)
-
 	PSEUDO_RET
 
 PSEUDO_END (__vfork)
diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S b/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S
index df824f5..2a66fef 100644
--- a/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S
+++ b/sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S
@@ -78,15 +78,6 @@  ENTRY (__clone)
 	crandc	cr1*4+eq,cr1*4+eq,cr0*4+so
 	bne-	cr1,L(parent)		/* The '-' is to minimise the race.  */
 
-	/* If CLONE_VM is set do not update the pid/tid field.  */
-	rldicl.	r0,r29,56,63		/* flags & CLONE_VM.  */
-	bne+	cr0,L(oldpid)
-
-	DO_CALL(SYS_ify(getpid))
-	stw	r3,TID(r13)
-	stw	r3,PID(r13)
-L(oldpid):
-
 	std	r2,FRAME_TOC_SAVE(r1)
 	/* Call procedure.  */
 	PPC64_LOAD_FUNCPTR r30
diff --git a/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S b/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S
index 3083ab7..6b4cf43 100644
--- a/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S
+++ b/sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S
@@ -28,31 +28,8 @@ 
 ENTRY (__vfork)
 	CALL_MCOUNT 0
 
-	/* Load the TCB-cached PID value and negates it. If It it is zero
-	   sets it to 0x800000.  And then sets its value again on TCB field.
-	   See raise.c for the logic that relies on this value.  */
-	lwz	r0,PID(r13)
-	cmpwi	cr0,r0,0
-	neg	r0,r0
-	bne-	cr0,1f
-	lis	r0,0x8000
-1:	stw	r0,PID(r13)
-
 	DO_CALL (SYS_ify (vfork))
 
-	cmpwi	cr1,r3,0
-	beqlr-	1
-
-	/* Restore the original value of the TCB cache of the PID, if we're
-	   the parent.  But in the child (syscall return value equals zero),
-	   leave things as they are.  */
-	lwz	r0,PID(r13)
-	clrlwi	r4,r0,1
-	cmpwi	cr1,r4,0
-	beq-	cr1,1f
-	neg	r4,r0
-1:	stw	r4,PID(r13)
-
 	PSEUDO_RET
 
 PSEUDO_END (__vfork)
diff --git a/sysdeps/unix/sysv/linux/pthread-pids.h b/sysdeps/unix/sysv/linux/pthread-pids.h
index d42bba0..618a5b1 100644
--- a/sysdeps/unix/sysv/linux/pthread-pids.h
+++ b/sysdeps/unix/sysv/linux/pthread-pids.h
@@ -26,5 +26,5 @@  static inline void
 __pthread_initialize_pids (struct pthread *pd)
 {
   INTERNAL_SYSCALL_DECL (err);
-  pd->pid = pd->tid = INTERNAL_SYSCALL (set_tid_address, err, 1, &pd->tid);
+  pd->tid = INTERNAL_SYSCALL_CALL (set_tid_address, err, &pd->tid);
 }
diff --git a/sysdeps/unix/sysv/linux/pthread_kill.c b/sysdeps/unix/sysv/linux/pthread_kill.c
index bcb3009..cc10997 100644
--- a/sysdeps/unix/sysv/linux/pthread_kill.c
+++ b/sysdeps/unix/sysv/linux/pthread_kill.c
@@ -21,6 +21,7 @@ 
 #include <pthreadP.h>
 #include <tls.h>
 #include <sysdep.h>
+#include <unistd.h>
 
 
 int
@@ -49,15 +50,9 @@  __pthread_kill (pthread_t threadid, int signo)
   /* We have a special syscall to do the work.  */
   INTERNAL_SYSCALL_DECL (err);
 
-  /* One comment: The PID field in the TCB can temporarily be changed
-     (in fork).  But this must not affect this code here.  Since this
-     function would have to be called while the thread is executing
-     fork, it would have to happen in a signal handler.  But this is
-     no allowed, pthread_kill is not guaranteed to be async-safe.  */
-  int val;
-  val = INTERNAL_SYSCALL (tgkill, err, 3, THREAD_GETMEM (THREAD_SELF, pid),
-			  tid, signo);
+  pid_t pid = __getpid ();
 
+  int val = INTERNAL_SYSCALL_CALL (tgkill, err, pid, tid, signo);
   return (INTERNAL_SYSCALL_ERROR_P (val, err)
 	  ? INTERNAL_SYSCALL_ERRNO (val, err) : 0);
 }
diff --git a/sysdeps/unix/sysv/linux/pthread_sigqueue.c b/sysdeps/unix/sysv/linux/pthread_sigqueue.c
index 7694d54..e393e0b 100644
--- a/sysdeps/unix/sysv/linux/pthread_sigqueue.c
+++ b/sysdeps/unix/sysv/linux/pthread_sigqueue.c
@@ -49,27 +49,22 @@  pthread_sigqueue (pthread_t threadid, int signo, const union sigval value)
   if (signo == SIGCANCEL || signo == SIGTIMER || signo == SIGSETXID)
     return EINVAL;
 
+  pid_t pid = getpid ();
+
   /* Set up the siginfo_t structure.  */
   siginfo_t info;
   memset (&info, '\0', sizeof (siginfo_t));
   info.si_signo = signo;
   info.si_code = SI_QUEUE;
-  info.si_pid = THREAD_GETMEM (THREAD_SELF, pid);
+  info.si_pid = pid;
   info.si_uid = getuid ();
   info.si_value = value;
 
   /* We have a special syscall to do the work.  */
   INTERNAL_SYSCALL_DECL (err);
 
-  /* One comment: The PID field in the TCB can temporarily be changed
-     (in fork).  But this must not affect this code here.  Since this
-     function would have to be called while the thread is executing
-     fork, it would have to happen in a signal handler.  But this is
-     no allowed, pthread_sigqueue is not guaranteed to be async-safe.  */
-  int val = INTERNAL_SYSCALL (rt_tgsigqueueinfo, err, 4,
-			      THREAD_GETMEM (THREAD_SELF, pid),
-			      tid, signo, &info);
-
+  int val = INTERNAL_SYSCALL_CALL (rt_tgsigqueueinfo, err, pid, tid, signo,
+				   &info);
   return (INTERNAL_SYSCALL_ERROR_P (val, err)
 	  ? INTERNAL_SYSCALL_ERRNO (val, err) : 0);
 #else
diff --git a/sysdeps/unix/sysv/linux/s390/s390-32/clone.S b/sysdeps/unix/sysv/linux/s390/s390-32/clone.S
index 2f8fa0b..b1de148 100644
--- a/sysdeps/unix/sysv/linux/s390/s390-32/clone.S
+++ b/sysdeps/unix/sysv/linux/s390/s390-32/clone.S
@@ -54,13 +54,6 @@  error:
 PSEUDO_END (__clone)
 
 thread_start:
-	tml	%r3,256		/* CLONE_VM == 0x00000100 */
-	jne	1f
-	svc	SYS_ify(getpid)
-	ear	%r3,%a0
-	st	%r2,PID(%r3)
-	st	%r2,TID(%r3)
-1:
 	/* fn is in gpr 1, arg in gpr 0 */
 	lr      %r2,%r0         /* set first parameter to void *arg */
 	ahi     %r15,-96        /* make room on the stack for the save area */
diff --git a/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S b/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S
index b7588eb..cc60e13 100644
--- a/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S
+++ b/sysdeps/unix/sysv/linux/s390/s390-32/vfork.S
@@ -28,21 +28,9 @@ 
    and the process ID of the new process to the old process.  */
 
 ENTRY (__libc_vfork)
-	ear	%r4,%a0
-	lhi	%r1,1
-	icm	%r3,15,PID(%r4)
-	sll	%r1,31
-	je	1f
-	lcr	%r1,%r3
-1:	st	%r1,PID(%r4)
-
 	/* Do vfork system call.  */
 	svc	SYS_ify (vfork)
 
-	ltr	%r2,%r2
-	je	1f
-	st	%r3,PID(%r4)
-1:
 	/* Check for error.  */
 	lhi	%r4,-4095
 	clr	%r2,%r4
diff --git a/sysdeps/unix/sysv/linux/s390/s390-64/clone.S b/sysdeps/unix/sysv/linux/s390/s390-64/clone.S
index fb81692..29606ac 100644
--- a/sysdeps/unix/sysv/linux/s390/s390-64/clone.S
+++ b/sysdeps/unix/sysv/linux/s390/s390-64/clone.S
@@ -55,15 +55,6 @@  error:
 PSEUDO_END (__clone)
 
 thread_start:
-	tmll	%r3,256		/* CLONE_VM == 0x00000100 */
-	jne	1f
-	svc	SYS_ify(getpid)
-	ear	%r3,%a0
-	sllg	%r3,%r3,32
-	ear	%r3,%a1
-	st	%r2,PID(%r3)
-	st	%r2,TID(%r3)
-1:
 	/* fn is in gpr 1, arg in gpr 0 */
 	lgr	%r2,%r0		/* set first parameter to void *arg */
 	aghi	%r15,-160	/* make room on the stack for the save area */
diff --git a/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S b/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S
index 0bd2161..b9a813f 100644
--- a/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S
+++ b/sysdeps/unix/sysv/linux/s390/s390-64/vfork.S
@@ -28,22 +28,9 @@ 
    and the process ID of the new process to the old process.  */
 
 ENTRY (__libc_vfork)
-	ear	%r4,%a0
-	sllg	%r4,%r4,32
-	ear	%r4,%a1
-	icm	%r3,15,PID(%r4)
-	llilh	%r1,32768
-	je	1f
-	lcr	%r1,%r3
-1:	st	%r1,PID(%r4)
-
 	/* Do vfork system call.  */
 	svc	SYS_ify (vfork)
 
-	ltgr	%r2,%r2
-	je	1f
-	st	%r3,PID(%r4)
-1:
 	/* Check for error.  */
 	lghi	%r4,-4095
 	clgr	%r2,%r4
diff --git a/sysdeps/unix/sysv/linux/sh/clone.S b/sysdeps/unix/sysv/linux/sh/clone.S
index 4cd7df1..ae27dad 100644
--- a/sysdeps/unix/sysv/linux/sh/clone.S
+++ b/sysdeps/unix/sysv/linux/sh/clone.S
@@ -66,23 +66,7 @@  ENTRY(__clone)
 2:
 	/* terminate the stack frame */
 	mov	#0, r14
-	mov	r4, r0
-	shlr8	r0
-	tst	#1, r0			// CLONE_VM = (1 << 8)
-	bf/s	4f
-	 mov	r4, r0
-	/* new pid */
-	mov	#+SYS_ify(getpid), r3
-	trapa	#0x15
-3:
-	stc	gbr, r1
-	mov.w	.Lpidoff, r2
-	add	r1, r2
-	mov.l	r0, @r2
-	mov.w	.Ltidoff, r2
-	add	r1, r2
-	mov.l	r0, @r2
-4:
+
 	/* thread starts */
 	mov.l	@r15, r1
 	jsr	@r1
diff --git a/sysdeps/unix/sysv/linux/sh/vfork.S b/sysdeps/unix/sysv/linux/sh/vfork.S
index 6895bc5..777da1e 100644
--- a/sysdeps/unix/sysv/linux/sh/vfork.S
+++ b/sysdeps/unix/sysv/linux/sh/vfork.S
@@ -26,30 +26,11 @@ 
    and the process ID of the new process to the old process.  */
 
 ENTRY (__libc_vfork)
-	/* Save the PID value.  */
-	stc	gbr, r2
-	mov.w	.L2, r0
-	mov.l	@(r0,r2), r4
-	neg	r4, r1
-	tst	r1, r1
-	bf	1f
-	mov	#1, r1
-	rotr	r1
-1:
-	mov.l	r1, @(r0,r2)
 
 	mov.w	.L1, r3
 	trapa	#0x10
 	mov     r0, r1
 
-	/* Restore the old PID value in the parent.  */
-	tst	r0, r0
-	bt.s	2f
-	 stc	gbr, r2
-	mov.w	.L2, r0
-	mov.l	r4, @(r0,r2)
-	mov	r1, r0
-2:
 	mov	#-12, r2
 	shad	r2, r1
 	not	r1, r1			// r1=0 means r0 = -1 to -4095
diff --git a/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S b/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S
index d6c92f6..0456a0d 100644
--- a/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S
+++ b/sysdeps/unix/sysv/linux/sparc/sparc32/clone.S
@@ -79,13 +79,6 @@  END(__clone)
 
 	.type	__thread_start,@function
 __thread_start:
-	andcc	%g4, CLONE_VM, %g0
-	bne	1f
-	set	__NR_getpid,%g1
-	ta	0x10
-	st	%o0,[%g7 + PID]
-	st	%o0,[%g7 + TID]
-1:
 	mov	%g0, %fp	/* terminate backtrace */
 	call	%g2
 	 mov	%g3,%o0
diff --git a/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S b/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S
index 0d0a3b5..6d98503 100644
--- a/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S
+++ b/sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S
@@ -22,24 +22,14 @@ 
 	.text
 	.globl		__syscall_error
 ENTRY(__libc_vfork)
-	ld	[%g7 + PID], %o5
-	cmp	%o5, 0
-	bne	1f
-	 sub	%g0, %o5, %o4
-	sethi	%hi(0x80000000), %o4
-1:	st	%o4, [%g7 + PID]
-
 	LOADSYSCALL(vfork)
 	ta	0x10
 	bcc	2f
 	 mov	%o7, %g1
-	st	%o5, [%g7 + PID]
 	call	__syscall_error
 	 mov	%g1, %o7
 2:	sub	%o1, 1, %o1
 	andcc	%o0, %o1, %o0
-	bne,a	1f
-	 st	%o5, [%g7 + PID]
 1:	retl
 	 nop
 END(__libc_vfork)
diff --git a/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S b/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S
index b0f6266..6ffead8 100644
--- a/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S
+++ b/sysdeps/unix/sysv/linux/sparc/sparc64/clone.S
@@ -76,13 +76,6 @@  END(__clone)
 
 	.type __thread_start,@function
 __thread_start:
-	andcc	%g4, CLONE_VM, %g0
-	bne,pt	%icc, 1f
-	set	__NR_getpid,%g1
-	ta	0x6d
-	st	%o0,[%g7 + PID]
-	st	%o0,[%g7 + TID]
-1:
 	mov	%g0, %fp	/* terminate backtrace */
 	call	%g2
 	 mov	%g3,%o0
diff --git a/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S b/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S
index 0818eba..298dd19 100644
--- a/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S
+++ b/sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S
@@ -22,24 +22,14 @@ 
 	.text
 	.globl	__syscall_error
 ENTRY(__libc_vfork)
-	ld	[%g7 + PID], %o5
-	sethi	%hi(0x80000000), %o3
-	cmp	%o5, 0
-	sub	%g0, %o5, %o4
-	move	%icc, %o3, %o4
-	st	%o4, [%g7 + PID]
-
 	LOADSYSCALL(vfork)
 	ta	0x6d
 	bcc,pt	%xcc, 2f
 	 mov	%o7, %g1
-	st	%o5, [%g7 + PID]
 	call	__syscall_error
 	 mov	%g1, %o7
 2:	sub	%o1, 1, %o1
 	andcc	%o0, %o1, %o0
-	bne,a,pt %icc, 1f
-	 st	%o5, [%g7 + PID]
 1:	retl
 	 nop
 END(__libc_vfork)
diff --git a/sysdeps/unix/sysv/linux/syscalls.list b/sysdeps/unix/sysv/linux/syscalls.list
index 7ae2541..248641b 100644
--- a/sysdeps/unix/sysv/linux/syscalls.list
+++ b/sysdeps/unix/sysv/linux/syscalls.list
@@ -18,6 +18,7 @@  execve		-	execve		i:spp	__execve	execve
 fdatasync	-	fdatasync	Ci:i	fdatasync
 flock		-	flock		i:ii	__flock		flock
 get_kernel_syms	EXTRA	get_kernel_syms	i:p	__compat_get_kernel_syms	get_kernel_syms@GLIBC_2.0:GLIBC_2.23
+getpid          -       getpid          Ei:     __getpid        getpid
 getegid		-	getegid		Ei:	__getegid	getegid
 geteuid		-	geteuid		Ei:	__geteuid	geteuid
 getpgid		-	getpgid		i:i	__getpgid	getpgid
diff --git a/sysdeps/unix/sysv/linux/tile/clone.S b/sysdeps/unix/sysv/linux/tile/clone.S
index d1d3646..3f9e3d5 100644
--- a/sysdeps/unix/sysv/linux/tile/clone.S
+++ b/sysdeps/unix/sysv/linux/tile/clone.S
@@ -163,22 +163,6 @@  ENTRY (__clone)
 .Lthread_start:
 	cfi_def_cfa_offset (FRAME_SIZE)
 	cfi_undefined (lr)
-	/* Check and see if we need to reset the PID, which we do if
-	   CLONE_VM isn't set, i.e. it's a fork-like clone with a new
-	   address space.  In that case we update the cached values
-	   from the true system pid (retrieved via __NR_getpid syscall).  */
-	moveli r0, CLONE_VM
-	and r0, r30, r0
-	BNEZ r0, .Lno_reset_pid   /* CLONE_VM is set */
-	moveli TREG_SYSCALL_NR_NAME, __NR_getpid
-	swint1
-	ADDLI_PTR r2, tp, PID_OFFSET
-	{
-	 ST4 r2, r0
-	 ADDLI_PTR r2, tp, TID_OFFSET
-	}
-	ST4 r2, r0
-.Lno_reset_pid:
 	{
 	 /* Invoke user function with specified argument. */
 	 move r0, r31
diff --git a/sysdeps/unix/sysv/linux/tile/vfork.S b/sysdeps/unix/sysv/linux/tile/vfork.S
index d8c5ce3..2272777 100644
--- a/sysdeps/unix/sysv/linux/tile/vfork.S
+++ b/sysdeps/unix/sysv/linux/tile/vfork.S
@@ -30,18 +30,6 @@ 
 	.text
 ENTRY (__vfork)
 	{
-	 addli r11, tp, PID_OFFSET	/* Point at PID. */
-	 movei r13, 1
-	}
-	{
-	 LD4U r12, r11			/* Load the saved PID.  */
-	 shli r13, r13, 31		/* Build 0x80000000. */
-	}
-	sub r12, zero, r12		/* Negate it.  */
-	CMOVEQZ r12, r12, r13		/* Replace zero pids.  */
-	ST4 r11, r12			/* Store the temporary PID.  */
-
-	{
 	 moveli r0, CLONE_VFORK | CLONE_VM | SIGCHLD
 	 move r1, zero
 	}
@@ -52,22 +40,6 @@  ENTRY (__vfork)
 	moveli TREG_SYSCALL_NR_NAME, __NR_clone
 	swint1
 
-	BEQZ r0, 1f			/* If we are the parent... */
-	{
-	 addli r11, tp, PID_OFFSET	/* Point at PID. */
-	 movei r13, 1
-	}
-	{
-	 LD4U r12, r11			/* Load the saved PID.  */
-	 shli r13, r13, 31		/* Build 0x80000000. */
-	}
-	{
-	 CMPEQ r13, r12, r12		/* Test for that value. */
-	 sub r12, zero, r12		/* Re-negate it.  */
-	}
-	CMOVNEZ r12, r13, zero		/* Replace zero pids.  */
-	ST4 r11, r12			/* Restore the PID.  */
-1:
 	BNEZ r1, 0f
 	jrp lr
 PSEUDO_END (__vfork)
diff --git a/sysdeps/unix/sysv/linux/tst-clone2.c b/sysdeps/unix/sysv/linux/tst-clone2.c
index 68a7e6d..091fd55 100644
--- a/sysdeps/unix/sysv/linux/tst-clone2.c
+++ b/sysdeps/unix/sysv/linux/tst-clone2.c
@@ -28,8 +28,14 @@ 
 #include <stdlib.h>
 #include <sys/types.h>
 #include <sys/wait.h>
+#include <sys/syscall.h>
 
-#include <tls.h> /* for THREAD_* macros.  */
+#include <stackinfo.h>  /* For _STACK_GROWS_{UP,DOWN}.  */
+
+static int do_test (void);
+
+#define TEST_FUNCTION do_test ()
+#include <test-skeleton.c>
 
 static int sig;
 static int pipefd[2];
@@ -39,39 +45,35 @@  f (void *a)
 {
   close (pipefd[0]);
 
-  pid_t pid = THREAD_GETMEM (THREAD_SELF, pid);
-  pid_t tid = THREAD_GETMEM (THREAD_SELF, tid);
+  pid_t ppid = getppid ();
+  pid_t pid = getpid ();
+  pid_t tid = syscall (__NR_gettid);
 
-  while (write (pipefd[1], &pid, sizeof pid) < 0)
-    continue;
-  while (write (pipefd[1], &tid, sizeof tid) < 0)
-    continue;
+  if (write (pipefd[1], &ppid, sizeof ppid) != sizeof (ppid))
+    FAIL_EXIT1 ("write ppid failed\n");
+  if (write (pipefd[1], &pid, sizeof pid) != sizeof (pid))
+    FAIL_EXIT1 ("write pid failed\n");
+  if (write (pipefd[1], &tid, sizeof tid) != sizeof (tid))
+    FAIL_EXIT1 ("write tid failed\n");
 
   return 0;
 }
 
 
 static int
-clone_test (int clone_flags)
+do_test (void)
 {
   sig = SIGRTMIN;
   sigset_t ss;
   sigemptyset (&ss);
   sigaddset (&ss, sig);
   if (sigprocmask (SIG_BLOCK, &ss, NULL) != 0)
-    {
-      printf ("sigprocmask failed: %m\n");
-      return 1;
-    }
+    FAIL_EXIT1 ("sigprocmask failed: %m");
 
   if (pipe2 (pipefd, O_CLOEXEC))
-    {
-      printf ("sigprocmask failed: %m\n");
-      return 1;
-    }
-
-  pid_t ppid = getpid ();
+    FAIL_EXIT1 ("pipe failed: %m");
 
+  int clone_flags = 0;
 #ifdef __ia64__
   extern int __clone2 (int (*__fn) (void *__arg), void *__child_stack_base,
 		       size_t __child_stack_size, int __flags,
@@ -88,61 +90,47 @@  clone_test (int clone_flags)
 #error "Define either _STACK_GROWS_DOWN or _STACK_GROWS_UP"
 #endif
 #endif
+
   close (pipefd[1]);
 
   if (p == -1)
+    FAIL_EXIT1("clone failed: %m");
+
+  pid_t ppid, pid, tid;
+  if (read (pipefd[0], &ppid, sizeof pid) != sizeof pid)
     {
-      printf ("clone failed: %m\n");
-      return 1;
+      kill (p, SIGKILL);
+      FAIL_EXIT1 ("read ppid failed: %m");
     }
-
-  pid_t pid, tid;
   if (read (pipefd[0], &pid, sizeof pid) != sizeof pid)
     {
-      printf ("read pid failed: %m\n");
       kill (p, SIGKILL);
-      return 1;
+      FAIL_EXIT1 ("read pid failed: %m");
     }
   if (read (pipefd[0], &tid, sizeof tid) != sizeof tid)
     {
-      printf ("read pid failed: %m\n");
       kill (p, SIGKILL);
-      return 1;
+      FAIL_EXIT1 ("read tid failed: %m");
     }
 
   close (pipefd[0]);
 
   int ret = 0;
 
-  /* For CLONE_VM glibc clone implementation does not change the pthread
-     pid/tid field.  */
-  if ((clone_flags & CLONE_VM) == CLONE_VM)
-    {
-      if ((ppid != pid) || (ppid != tid))
-	{
-	  printf ("parent pid (%i) != received pid/tid (%i/%i)\n",
-		  (int)ppid, (int)pid, (int)tid);
-	  ret = 1;
-	}
-    }
-  /* For any other flag clone updates the new pthread pid and tid with
-     the clone return value.  */
-  else
-    {
-      if ((p != pid) || (p != tid))
-	{
-	  printf ("child pid (%i) != received pid/tid (%i/%i)\n",
-		  (int)p, (int)pid, (int)tid);
-	  ret = 1;
-	}
-    }
+  pid_t own_pid = getpid ();
+  pid_t own_tid = syscall (__NR_gettid);
+
+  /* Some sanity checks for clone syscall: returned ppid should be current
+     pid and both returned tid/pid should be different from current one.  */
+  if ((ppid != own_pid) || (pid == own_pid) || (tid == own_tid))
+    FAIL_RET ("ppid=%i pid=%i tid=%i | own_pid=%i own_tid=%i",
+ 	      (int)ppid, (int)pid, (int)tid, (int)own_pid, (int)own_tid);
 
   int e;
   if (waitpid (p, &e, __WCLONE) != p)
     {
-      puts ("waitpid failed");
       kill (p, SIGKILL);
-      return 1;
+      FAIL_EXIT1 ("waitpid failed");
     }
   if (!WIFEXITED (e))
     {
@@ -150,29 +138,10 @@  clone_test (int clone_flags)
 	printf ("died from signal %s\n", strsignal (WTERMSIG (e)));
       else
 	puts ("did not terminate correctly");
-      return 1;
+      exit (EXIT_FAILURE);
     }
   if (WEXITSTATUS (e) != 0)
-    {
-      printf ("exit code %d\n", WEXITSTATUS (e));
-      return 1;
-    }
+    FAIL_EXIT1 ("exit code %d", WEXITSTATUS (e));
 
   return ret;
 }
-
-int
-do_test (void)
-{
-  /* First, check that the clone implementation, without any flag, updates
-     the struct pthread to contain the new PID and TID.  */
-  int ret = clone_test (0);
-  /* Second, check that with CLONE_VM the struct pthread PID and TID fields
-     remain unmodified after the clone.  Any modifications would cause problem
-     for the parent as described in bug 19957.  */
-  ret += clone_test (CLONE_VM);
-  return ret;
-}
-
-#define TEST_FUNCTION do_test ()
-#include "../test-skeleton.c"
diff --git a/sysdeps/unix/sysv/linux/x86_64/clone.S b/sysdeps/unix/sysv/linux/x86_64/clone.S
index 66f4b11..5629aed 100644
--- a/sysdeps/unix/sysv/linux/x86_64/clone.S
+++ b/sysdeps/unix/sysv/linux/x86_64/clone.S
@@ -91,14 +91,6 @@  L(thread_start):
 	   the outermost frame obviously.  */
 	xorl	%ebp, %ebp
 
-	andq	$CLONE_VM, %rdi
-	jne	1f
-	movl	$SYS_ify(getpid), %eax
-	syscall
-	movl	%eax, %fs:PID
-	movl	%eax, %fs:TID
-1:
-
 	/* Set up arguments for the function call.  */
 	popq	%rax		/* Function to call.  */
 	popq	%rdi		/* Argument.  */
diff --git a/sysdeps/unix/sysv/linux/x86_64/vfork.S b/sysdeps/unix/sysv/linux/x86_64/vfork.S
index 8332ade..cdd2dea 100644
--- a/sysdeps/unix/sysv/linux/x86_64/vfork.S
+++ b/sysdeps/unix/sysv/linux/x86_64/vfork.S
@@ -34,16 +34,6 @@  ENTRY (__vfork)
 	cfi_adjust_cfa_offset(-8)
 	cfi_register(%rip, %rdi)
 
-	/* Save the TCB-cached PID away in %esi, and then negate the TCB
-           field.  But if it's zero, set it to 0x80000000 instead.  See
-           raise.c for the logic that relies on this value.  */
-	movl	%fs:PID, %esi
-	movl	$0x80000000, %ecx
-	movl	%esi, %edx
-	negl	%edx
-	cmove	%ecx, %edx
-	movl	%edx, %fs:PID
-
 	/* Stuff the syscall number in RAX and enter into the kernel.  */
 	movl	$SYS_ify (vfork), %eax
 	syscall
@@ -52,14 +42,6 @@  ENTRY (__vfork)
 	pushq	%rdi
 	cfi_adjust_cfa_offset(8)
 
-	/* Restore the original value of the TCB cache of the PID, if we're
-	   the parent.  But in the child (syscall return value equals zero),
-	   leave things as they are.  */
-	testq	%rax, %rax
-	je	1f
-	movl	%esi, %fs:PID
-1:
-
 	cmpl	$-4095, %eax
 	jae SYSCALL_ERROR_LABEL		/* Branch forward if it failed.  */
 
diff --git a/sysdeps/x86_64/nptl/tcb-offsets.sym b/sysdeps/x86_64/nptl/tcb-offsets.sym
index aeb7526..8a25c48 100644
--- a/sysdeps/x86_64/nptl/tcb-offsets.sym
+++ b/sysdeps/x86_64/nptl/tcb-offsets.sym
@@ -4,7 +4,6 @@ 
 
 RESULT			offsetof (struct pthread, result)
 TID			offsetof (struct pthread, tid)
-PID			offsetof (struct pthread, pid)
 CANCELHANDLING		offsetof (struct pthread, cancelhandling)
 CLEANUP_JMP_BUF		offsetof (struct pthread, cleanup_jmp_buf)
 CLEANUP			offsetof (struct pthread, cleanup)
-- 
2.7.4