| Message ID | 1458692498-9210-1-git-send-email-khilman@baylibre.com |
|---|---|
| State | New |
| Headers | show |
Hi Kevin, Am 23.03.2016 um 01:21 schrieb Kevin Hilman: > Add basic, minimal DT files for the Amlogic GXBB-based P200 > development board and Hardkernel ODROID-C2 boards. > > Used the other gxbb boards from Andreas Färber as a starting point. > > Cc: Andreas Färber <afaerber@suse.de> > Cc: Carlo Caione <carlo@endlessm.com> > Signed-off-by: Kevin Hilman <khilman@baylibre.com> > --- > Boot tested on top of next-20160321 on both boards. > > arch/arm64/boot/dts/amlogic/Makefile | 2 + > .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 65 +++++++++++++++++++++ > arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 66 ++++++++++++++++++++++ > 3 files changed, 133 insertions(+) > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts > > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index eb672f38f89e..2cbaea3587ae 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -1,6 +1,8 @@ > dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb Please keep the list sorted alphabetically. (vega-s95 only deviates in keeping Pro and Meta sorted in logically ascending order.) > +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb Hm, intuitively I would've named it meson-gxbb-odroid-c2.dtb. But I see that all other *odroid*.dts are named this way, so best to stick to the scheme I guess. > > always := $(dtb-y) > subdir-y := $(dts-dirs) > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > new file mode 100644 > index 000000000000..1a9e0332729c > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > @@ -0,0 +1,65 @@ > +/* > + * Copyright (c) 2016 Andreas Färber > + * Copyright (c) 2016 BayLibre, Inc. > + * Author: Kevin Hilman <khilman@kernel.org> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > + > +#include "meson-gxbb.dtsi" > + > +/ { > + compatible = "amlogic,meson-gxbb-odroidc2", "amlogic,meson-gxbb"; This should be "hardkernel,odroid-c2", "amlogic,meson-gxbb". And the compatible string needs to be documented in Documentation/devicetree/bindings/arm/amlogic.txt. Officially that's requested to be a separate patch, so maybe split P200 and C2 while at it to encourage people providing a Tested-by for this more common one? > + model = "Hardkernel ODROID-C2"; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x80000000>; > + }; > +}; > + > +&uart_AO { > + status = "okay"; > +}; Otherwise looks good and I tested a similar dtb (telos) okay on the ODROID-C2. > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts > new file mode 100644 > index 000000000000..231abf2d719d > --- /dev/null > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts > @@ -0,0 +1,66 @@ > +/* > + * Copyright (c) 2016 Andreas Färber > + * Copyright (c) 2016 BayLibre, Inc. > + * Author: Kevin Hilman <khilman@kernel.org> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > + > +#include "meson-gxbb.dtsi" > + > +/ { > + compatible = "amlogic,meson-gxbb-p200", "amlogic,meson-gxbb"; How unique is P200? I wonder whether we could simplify this to "amlogic,p200", "amlogic,meson-gxbb". I.e., is there or might there be a P200 board for a different SoC? > + model = "Amlogic Meson GXBB P200 Development Board"; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x40000000>; > + }; > +}; > + > +/* This UART is brought out to the DB9 connector */ > +&uart_AO { > + status = "okay"; > +}; Otherwise looks fine. Thanks, Andreas
On Wed, Mar 23, 2016 at 1:50 AM, Andreas Färber <afaerber@suse.de> wrote: [...] >> + >> +/dts-v1/; >> + >> +#include "meson-gxbb.dtsi" >> + >> +/ { >> + compatible = "amlogic,meson-gxbb-odroidc2", "amlogic,meson-gxbb"; > > This should be "hardkernel,odroid-c2", "amlogic,meson-gxbb". > > And the compatible string needs to be documented in > Documentation/devicetree/bindings/arm/amlogic.txt. Officially that's > requested to be a separate patch, so maybe split P200 and C2 while at it > to encourage people providing a Tested-by for this more common one? Yes, please. [...] >> + >> +/dts-v1/; >> + >> +#include "meson-gxbb.dtsi" >> + >> +/ { >> + compatible = "amlogic,meson-gxbb-p200", "amlogic,meson-gxbb"; > > How unique is P200? I wonder whether we could simplify this to > "amlogic,p200", "amlogic,meson-gxbb". I.e., is there or might there be a > P200 board for a different SoC? I think that we can safely just use "amlogic,p200" here. Thank you!
Andreas Färber <afaerber@suse.de> writes: > Am 23.03.2016 um 01:21 schrieb Kevin Hilman: >> Add basic, minimal DT files for the Amlogic GXBB-based P200 >> development board and Hardkernel ODROID-C2 boards. >> >> Used the other gxbb boards from Andreas Färber as a starting point. >> >> Cc: Andreas Färber <afaerber@suse.de> >> Cc: Carlo Caione <carlo@endlessm.com> >> Signed-off-by: Kevin Hilman <khilman@baylibre.com> >> --- >> Boot tested on top of next-20160321 on both boards. >> >> arch/arm64/boot/dts/amlogic/Makefile | 2 + >> .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 65 +++++++++++++++++++++ >> arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 66 ++++++++++++++++++++++ >> 3 files changed, 133 insertions(+) >> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts >> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts >> >> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile >> index eb672f38f89e..2cbaea3587ae 100644 >> --- a/arch/arm64/boot/dts/amlogic/Makefile >> +++ b/arch/arm64/boot/dts/amlogic/Makefile >> @@ -1,6 +1,8 @@ >> dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb >> dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb >> dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb >> +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb > > Please keep the list sorted alphabetically. (vega-s95 only deviates in > keeping Pro and Meta sorted in logically ascending order.) OK. >> +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb > > Hm, intuitively I would've named it meson-gxbb-odroid-c2.dtb. But I see > that all other *odroid*.dts are named this way, so best to stick to the > scheme I guess. Yeah, I would've preferred odroid-c2 as well, but decided to stick to the pattern already set. >> >> always := $(dtb-y) >> subdir-y := $(dts-dirs) >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts >> new file mode 100644 >> index 000000000000..1a9e0332729c >> --- /dev/null >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts >> @@ -0,0 +1,65 @@ >> +/* >> + * Copyright (c) 2016 Andreas Färber >> + * Copyright (c) 2016 BayLibre, Inc. >> + * Author: Kevin Hilman <khilman@kernel.org> >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> + >> +/dts-v1/; >> + >> +#include "meson-gxbb.dtsi" >> + >> +/ { >> + compatible = "amlogic,meson-gxbb-odroidc2", "amlogic,meson-gxbb"; > > This should be "hardkernel,odroid-c2", "amlogic,meson-gxbb". > > And the compatible string needs to be documented in > Documentation/devicetree/bindings/arm/amlogic.txt. Officially that's > requested to be a separate patch, so maybe split P200 and C2 while at it > to encourage people providing a Tested-by for this more common one? OK. >> + model = "Hardkernel ODROID-C2"; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + memory@0 { >> + device_type = "memory"; >> + reg = <0x0 0x0 0x0 0x80000000>; >> + }; >> +}; >> + >> +&uart_AO { >> + status = "okay"; >> +}; > > Otherwise looks good and I tested a similar dtb (telos) okay on the > ODROID-C2. > >> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts >> new file mode 100644 >> index 000000000000..231abf2d719d >> --- /dev/null >> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts >> @@ -0,0 +1,66 @@ >> +/* >> + * Copyright (c) 2016 Andreas Färber >> + * Copyright (c) 2016 BayLibre, Inc. >> + * Author: Kevin Hilman <khilman@kernel.org> >> + * >> + * This file is dual-licensed: you can use it either under the terms >> + * of the GPL or the X11 license, at your option. Note that this dual >> + * licensing only applies to this file, and not this project as a >> + * whole. >> + * >> + * a) This library is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation; either version 2 of the >> + * License, or (at your option) any later version. >> + * >> + * This library is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * Or, alternatively, >> + * >> + * b) Permission is hereby granted, free of charge, to any person >> + * obtaining a copy of this software and associated documentation >> + * files (the "Software"), to deal in the Software without >> + * restriction, including without limitation the rights to use, >> + * copy, modify, merge, publish, distribute, sublicense, and/or >> + * sell copies of the Software, and to permit persons to whom the >> + * Software is furnished to do so, subject to the following >> + * conditions: >> + * >> + * The above copyright notice and this permission notice shall be >> + * included in all copies or substantial portions of the Software. >> + * >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >> + * OTHER DEALINGS IN THE SOFTWARE. >> + */ >> + >> +/dts-v1/; >> + >> +#include "meson-gxbb.dtsi" >> + >> +/ { >> + compatible = "amlogic,meson-gxbb-p200", "amlogic,meson-gxbb"; > > How unique is P200? I wonder whether we could simplify this to > "amlogic,p200", "amlogic,meson-gxbb". I.e., is there or might there be a > P200 board for a different SoC? OK. >> + model = "Amlogic Meson GXBB P200 Development Board"; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + memory@0 { >> + device_type = "memory"; >> + reg = <0x0 0x0 0x0 0x40000000>; >> + }; >> +}; >> + >> +/* This UART is brought out to the DB9 connector */ >> +&uart_AO { >> + status = "okay"; >> +}; > > Otherwise looks fine. Thanks, I'll respin shortly. Kevin
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index eb672f38f89e..2cbaea3587ae 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,6 +1,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts new file mode 100644 index 000000000000..1a9e0332729c --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Kevin Hilman <khilman@kernel.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxbb.dtsi" + +/ { + compatible = "amlogic,meson-gxbb-odroidc2", "amlogic,meson-gxbb"; + model = "Hardkernel ODROID-C2"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts new file mode 100644 index 000000000000..231abf2d719d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Kevin Hilman <khilman@kernel.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxbb.dtsi" + +/ { + compatible = "amlogic,meson-gxbb-p200", "amlogic,meson-gxbb"; + model = "Amlogic Meson GXBB P200 Development Board"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; +};
Add basic, minimal DT files for the Amlogic GXBB-based P200 development board and Hardkernel ODROID-C2 boards. Used the other gxbb boards from Andreas Färber as a starting point. Cc: Andreas Färber <afaerber@suse.de> Cc: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> --- Boot tested on top of next-20160321 on both boards. arch/arm64/boot/dts/amlogic/Makefile | 2 + .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 65 +++++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 66 ++++++++++++++++++++++ 3 files changed, 133 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts