diff mbox

[OpenWrt-Devel,RFC] A patch for mt7621 nand controler. Revision 2.

Message ID CAOFwh=DZieEa4ZA0ex6G3OR2OgEeP6Fh+SSw=Zg-L0wWm1QRTA@mail.gmail.com
State Accepted
Headers show

Commit Message

Kirill Berezin Nov. 13, 2015, 7:55 a.m. UTC 
Hello,

It turned out that mtk_nand driver uses some sophisticated accounting and a
general nand code must be patched.

This patch adds required read and erase calls to a general nand code. I
used a  code  for re6500 released by Linksys as a reference.

All required operations (erase, write and read) are usable. However I found
that jffs2 filesystem can be created only on top of a ubi volume. I tried
to create jffs2 directly on mtd device but pages with clean markers are
became uncorrectable.

This patch also includes changes that I sent earlier.

Best regards,
Kirill.

Signed-off-by: Kirill Berezin (fyiwdt@gmail.com)

Comments

John Crispin Nov. 21, 2015, 6:25 p.m. UTC | #1 
Hi,

ugly patch to make an ugly driver work. i am sure you had a lot of fun
debugging this one. thanks !

	John

On 13/11/2015 08:55, Kirill Berezin wrote:
> Hello,
> 
> It turned out that mtk_nand driver uses some sophisticated accounting
> and a general nand code must be patched.
> 
> This patch adds required read and erase calls to a general nand code. I
> used a  code  for re6500 released by Linksys as a reference.
> 
> All required operations (erase, write and read) are usable. However I
> found that jffs2 filesystem can be created only on top of a ubi volume.
> I tried  to create jffs2 directly on mtd device but pages with clean
> markers are became uncorrectable.
> 
> This patch also includes changes that I sent earlier.
> 
> Best regards,
> Kirill.
> 
> Signed-off-by: Kirill Berezin (fyiwdt@gmail.com <mailto:fyiwdt@gmail.com>)
> 
> 
> 
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
diff mbox

Patch

diff -urNb a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
--- a/drivers/mtd/nand/mtk_nand.c	2015-11-06 16:44:31.000000000 +0400
+++ b/drivers/mtd/nand/mtk_nand.c	2015-11-12 10:06:20.080430855 +0400
@@ -110,6 +110,10 @@ 
 int manu_id;
 int dev_id;
 
+/* this constant was taken from linux/nand/nand.h v 3.14
+ * in later versions it seems it was removed in order to save a bit of space
+ */
+#define NAND_MAX_OOBSIZE 774
 static u8 local_oob_buf[NAND_MAX_OOBSIZE];
 
 static u8 nand_badblock_offset = 0;
@@ -348,7 +352,7 @@ 
 		if (0xF == u4ErrNum) {
 			mtd->ecc_stats.failed++;
 			bRet = false;
-			//printk(KERN_ERR"UnCorrectable at PageAddr=%d\n", u4PageAddr);
+			printk(KERN_ERR"mtk_nand: UnCorrectable at PageAddr=%d\n", u4PageAddr);
 		} else {
 			for (i = 0; i < ((u4ErrNum + 1) >> 1); ++i) {
 				au4ErrBitLoc[i] = DRV_Reg32(ECC_DECEL0_REG32 + i);
@@ -1422,7 +1426,7 @@ 
 {
 	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
 
-	chip->erase_cmd(mtd, page);
+	chip->erase(mtd, page);
 
 	return chip->waitfunc(mtd, chip);
 }
@@ -2094,8 +2098,8 @@ 
 	nand_chip->write_page = mtk_nand_write_page;
 	nand_chip->ecc.write_oob = mtk_nand_write_oob;
 	nand_chip->block_markbad = mtk_nand_block_markbad;   // need to add nand_get_device()/nand_release_device().
-	//	nand_chip->erase = mtk_nand_erase;	
-	//    nand_chip->read_page = mtk_nand_read_page;
+	nand_chip->erase_mtk = mtk_nand_erase;	
+	nand_chip->read_page = mtk_nand_read_page;
 	nand_chip->ecc.read_oob = mtk_nand_read_oob;
 	nand_chip->block_bad = mtk_nand_block_bad;
 
@@ -2175,6 +2179,21 @@ 
 	nand_chip->pagemask = (nand_chip->chipsize >> nand_chip->page_shift) - 1;
 	nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
 	nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;//0x1C;//ffs(nand_chip->chipsize) - 1;
+
+	/* allocate buffers or call select_chip here or a bit earlier*/
+	{
+		struct nand_buffers *nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize + mtd->oobsize * 3, GFP_KERNEL);
+		if (!nbuf) {
+			return -ENOMEM;
+		}
+		nbuf->ecccalc = (uint8_t *)(nbuf + 1);
+		nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
+		nbuf->databuf = nbuf->ecccode + mtd->oobsize;
+
+		nand_chip->buffers = nbuf;
+		nand_chip->options |= NAND_OWN_BUFFERS;
+	}
+
 	nand_chip->oob_poi = nand_chip->buffers->databuf + mtd->writesize;
 	nand_chip->badblockpos = 0;
 
@@ -2251,6 +2270,9 @@ 
 	MSG(INIT, "[NFI] mtk_nand_probe fail, err = %d!\n", err);
 	nand_release(mtd);
 	platform_set_drvdata(pdev, NULL);
+	if ( NULL != nand_chip->buffers) {
+		kfree(nand_chip->buffers);
+	}
 	kfree(host);
 	nand_disable_clock();
 	return err;
@@ -2261,8 +2283,12 @@ 
 {
 	struct mtk_nand_host *host = platform_get_drvdata(pdev);
 	struct mtd_info *mtd = &host->mtd;
+	struct nand_chip *nand_chip = &host->nand_chip;
 
 	nand_release(mtd);
+	if ( NULL != nand_chip->buffers) {
+		kfree(nand_chip->buffers);
+	}
 	kfree(host);
 	nand_disable_clock();
 
diff -urNb a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
--- a/drivers/mtd/nand/nand_base.c	2015-11-06 16:44:31.000000000 +0400
+++ b/drivers/mtd/nand/nand_base.c	2015-11-09 10:24:52.931720862 +0400
@@ -1575,6 +1575,9 @@ 
 						 __func__, buf);
 
 read_retry:
+#ifdef CONFIG_MTK_MTD_NAND
+			ret = chip->read_page(mtd, chip, bufpoi, page);
+#else
 			chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
 
 			/*
@@ -1593,6 +1596,7 @@ 
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi,
 							  oob_required, page);
+#endif /* CONFIG_MTK_MTD_NAND */
 			if (ret < 0) {
 				if (use_bufpoi)
 					/* Invalidate page cache */
@@ -2770,8 +2774,11 @@ 
 		if (page <= chip->pagebuf && chip->pagebuf <
 		    (page + pages_per_block))
 			chip->pagebuf = -1;
-
+#ifdef CONFIG_MTK_MTD_NAND
+		status = chip->erase_mtk(mtd, page & chip->pagemask);
+#else
 		status = chip->erase(mtd, page & chip->pagemask);
+#endif /* CONFIG_MTK_MTD_NAND */
 
 		/*
 		 * See if operation failed and additional status checks are
diff -urNb a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h
--- a/drivers/mtd/nand/nand_device_list.h	2015-11-06 16:44:31.000000000 +0400
+++ b/drivers/mtd/nand/nand_device_list.h	2015-11-06 11:13:26.000000000 +0400
@@ -43,6 +43,8 @@ 
 	{0xADBC, 0x905554, 5, 16, 512, 128, 2048, 64, 0x10801011, "H9DA4GH4JJAMC", 0},
     {0x01F1, 0x801D01, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "S34ML01G100TF", 0},
     {0x92F1, 0x8095FF, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81A", 0},
+	{0xC8DA, 0x909544, 5, 8, 256, 128, 2048, 64, 0x30C77fff, "F59L2G81A", 0},
+	{0xC8DC, 0x909554, 5, 8, 512, 128, 2048, 64, 0x30C77fff, "F59L4G81A", 0},
 	{0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0},
     {0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0},
     {0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0},
diff -urNb a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
--- a/include/linux/mtd/nand.h	2015-11-06 16:44:30.000000000 +0400
+++ b/include/linux/mtd/nand.h	2015-11-09 10:18:55.704701886 +0400
@@ -653,6 +653,10 @@ 
 	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t offset, int data_len, const uint8_t *buf,
 			int oob_required, int page, int cached, int raw);
+#ifdef CONFIG_MTK_MTD_NAND
+	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, u8 *buf, int page);
+	int (*erase_mtk)(struct mtd_info *mtd, int page);
+#endif /* CONFIG_MTK_MTD_NAND */
 	int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
 			int feature_addr, uint8_t *subfeature_para);
 	int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,