diff mbox

[07/17] usb: musb: omap2430: use *syscon* framework to write to mailbox register

Message ID 1435060743-5511-8-git-send-email-kishon@ti.com
State Needs Review / ACK, archived
Headers show

Checks

Context Check Description
robh/checkpatch warning total: 1 errors, 0 warnings, 0 lines checked
robh/patch-applied success

Commit Message

Kishon Vijay Abraham I June 23, 2015, 11:58 a.m. UTC
Deprecate using phy-omap-control driver to write to the mailbox register
and start using *syscon* framework to do the same.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/usb/omap-usb.txt |    7 +-
 drivers/usb/musb/omap2430.c                        |  118 ++++++++++++++++----
 2 files changed, 102 insertions(+), 23 deletions(-)

Comments

Roger Quadros June 24, 2015, 11:39 a.m. UTC | #1
On Tue, 23 Jun 2015 17:28:52 +0530
Kishon Vijay Abraham I <kishon@ti.com> wrote:

> Deprecate using phy-omap-control driver to write to the mailbox register
> and start using *syscon* framework to do the same.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  Documentation/devicetree/bindings/usb/omap-usb.txt |    7 +-
>  drivers/usb/musb/omap2430.c                        |  118 ++++++++++++++++----
>  2 files changed, 102 insertions(+), 23 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
> index 38d9bb8..c001306 100644
> --- a/Documentation/devicetree/bindings/usb/omap-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
> @@ -20,10 +20,15 @@ OMAP MUSB GLUE
>   - phy-names : the names of the PHY corresponding to the PHYs present in the
>     *phy* phandle.
>  
> -Optional properties:
> +Optional Properties:
> +Deprecated properties:
>   - ctrl-module : phandle of the control module this glue uses to write to
>     mailbox
>  
> +Recommended properies:
> + - syscon-otghs : phandle/offset pair. Phandle to the system control module and the
> +   register offset of the mailbox.
> +
>  SOC specific device node entry
>  usb_otg_hs: usb_otg_hs@4a0ab000 {
>  	compatible = "ti,omap4-musb";
> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
> index cc752d8..bcd6d1e 100644
> --- a/drivers/usb/musb/omap2430.c
> +++ b/drivers/usb/musb/omap2430.c
> @@ -39,16 +39,27 @@
>  #include <linux/usb/musb-omap.h>
>  #include <linux/phy/omap_control_phy.h>
>  #include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
>  
>  #include "musb_core.h"
>  #include "omap2430.h"
>  
> +#define OMAP2430_MUSB_MODE_MASK	0x1f
> +#define OMAP2430_MUSB_AVALID	(0x1 << 0)
> +#define OMAP2430_MUSB_BVALID	(0x1 << 1)
> +#define OMAP2430_MUSB_VBUSVALID	(0x1 << 2)
> +#define OMAP2430_MUSB_SESSEND	(0x1 << 3)
> +#define OMAP2430_MUSB_IDDIG	(0x1 << 4)
> +
>  struct omap2430_glue {
>  	struct device		*dev;
>  	struct platform_device	*musb;
>  	enum omap_musb_vbus_id_status status;
>  	struct work_struct	omap_musb_mailbox_work;
>  	struct device		*control_otghs;
> +	struct regmap		*syscon_otghs; /* ctrl. reg. acces */
> +	unsigned int            otghs_reg; /* otghs reg. index within syscon */
>  };
>  #define glue_to_musb(g)		platform_get_drvdata(g->musb)
>  
> @@ -253,6 +264,47 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
>  }
>  EXPORT_SYMBOL_GPL(omap_musb_mailbox);
>  
> +static void omap2430_musb_set_usbmode(struct omap2430_glue *glue,
> +				      enum omap_control_usb_mode mode)
> +{
> +	u32 val;
> +	int ret;
> +
> +	if (glue->syscon_otghs) {
> +		switch (mode) {
> +		case USB_MODE_HOST:
> +			val = OMAP2430_MUSB_AVALID | OMAP2430_MUSB_VBUSVALID;
> +			break;
> +
> +		case USB_MODE_DEVICE:
> +			val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_AVALID |
> +				OMAP2430_MUSB_VBUSVALID;
> +			break;
> +
> +		case USB_MODE_DISCONNECT:
> +			val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_SESSEND;
> +			break;
> +
> +		default:
> +			dev_dbg(glue->dev, "Invalid mode\n");
> +			goto err_regmap_update;
> +		}
> +
> +		ret = regmap_update_bits(glue->syscon_otghs,
> +					 glue->otghs_reg,
> +					 OMAP2430_MUSB_MODE_MASK, val);
> +		if (ret < 0)
> +			goto err_regmap_update;
> +	} else {
> +		omap_control_usb_set_mode(glue->control_otghs, mode);
> +	}
> +
> +	return;
> +
> +err_regmap_update:
> +	dev_err(glue->dev, "Failed to set mode to %d\n", mode);
> +}
> +
>  static void omap_musb_set_mailbox(struct omap2430_glue *glue)
>  {
>  	struct musb *musb = glue_to_musb(glue);
> @@ -270,8 +322,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
>  		musb->xceiv->last_event = USB_EVENT_ID;
>  		if (musb->gadget_driver) {
>  			pm_runtime_get_sync(dev);
> -			omap_control_usb_set_mode(glue->control_otghs,
> -				USB_MODE_HOST);
> +			omap2430_musb_set_usbmode(glue, USB_MODE_HOST);
>  			omap2430_musb_set_vbus(musb, 1);
>  		}
>  		break;
> @@ -284,7 +335,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
>  		musb->xceiv->last_event = USB_EVENT_VBUS;
>  		if (musb->gadget_driver)
>  			pm_runtime_get_sync(dev);
> -		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
> +		omap2430_musb_set_usbmode(glue, USB_MODE_DEVICE);
>  		break;
>  
>  	case OMAP_MUSB_ID_FLOAT:
> @@ -301,8 +352,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
>  		if (data->interface_type == MUSB_INTERFACE_UTMI)
>  			otg_set_vbus(musb->xceiv->otg, 0);
>  
> -		omap_control_usb_set_mode(glue->control_otghs,
> -			USB_MODE_DISCONNECT);
> +		omap2430_musb_set_usbmode(glue, USB_MODE_DISCONNECT);
>  		break;
>  	default:
>  		dev_dbg(dev, "ID float\n");
> @@ -444,7 +494,7 @@ static void omap2430_musb_enable(struct musb *musb)
>  	switch (glue->status) {
>  
>  	case OMAP_MUSB_ID_GROUND:
> -		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
> +		omap2430_musb_set_usbmode(glue, USB_MODE_HOST);
>  		if (data->interface_type != MUSB_INTERFACE_UTMI)
>  			break;
>  		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
> @@ -463,7 +513,7 @@ static void omap2430_musb_enable(struct musb *musb)
>  		break;
>  
>  	case OMAP_MUSB_VBUS_VALID:
> -		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
> +		omap2430_musb_set_usbmode(glue, USB_MODE_DEVICE);
>  		break;
>  
>  	default:
> @@ -477,8 +527,7 @@ static void omap2430_musb_disable(struct musb *musb)
>  	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
>  
>  	if (glue->status != OMAP_MUSB_UNKNOWN)
> -		omap_control_usb_set_mode(glue->control_otghs,
> -			USB_MODE_DISCONNECT);
> +		omap2430_musb_set_usbmode(glue, USB_MODE_DISCONNECT);
>  }
>  
>  static int omap2430_musb_exit(struct musb *musb)
> @@ -507,6 +556,40 @@ static const struct musb_platform_ops omap2430_ops = {
>  
>  static u64 omap2430_dmamask = DMA_BIT_MASK(32);
>  
> +static int omap2430_get_control(struct omap2430_glue *glue,
> +				struct device_node *np)
> +{
> +	struct device_node *control_node;
> +	struct platform_device *control_pdev;
> +
> +	glue->syscon_otghs = syscon_regmap_lookup_by_phandle(np,
> +							     "syscon-otghs");
> +	if (IS_ERR(glue->syscon_otghs)) {
> +		dev_info(glue->dev, "can't get syscon, using control device\n");

dev_dbg().

> +		glue->syscon_otghs = NULL;
> +
> +		control_node = of_parse_phandle(np, "ctrl-module", 0);
> +		if (control_node) {
> +			control_pdev = of_find_device_by_node(control_node);
> +			if (!control_pdev) {
> +				dev_err(glue->dev,
> +					"Failed to get control device\n");
> +				return -EINVAL;
> +			}
> +			glue->control_otghs = &control_pdev->dev;
> +		}
> +	} else {
> +		if (of_property_read_u32_index(np, "syscon-otghs", 1,
> +					       &glue->otghs_reg)) {
> +			dev_err(glue->dev,
> +				"couldn't get otghs reg. offset\n");
> +			return -EINVAL;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
>  static int omap2430_probe(struct platform_device *pdev)
>  {
>  	struct resource			musb_resources[3];
> @@ -538,9 +621,6 @@ static int omap2430_probe(struct platform_device *pdev)
>  	glue->control_otghs = ERR_PTR(-ENODEV);
>  
>  	if (np) {
> -		struct device_node *control_node;
> -		struct platform_device *control_pdev;
> -
>  		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
>  		if (!pdata)
>  			goto err2;
> @@ -567,16 +647,10 @@ static int omap2430_probe(struct platform_device *pdev)
>  		pdata->board_data	= data;
>  		pdata->config		= config;
>  
> -		control_node = of_parse_phandle(np, "ctrl-module", 0);
> -		if (control_node) {
> -			control_pdev = of_find_device_by_node(control_node);
> -			if (!control_pdev) {
> -				dev_err(&pdev->dev, "Failed to get control device\n");
> -				ret = -EINVAL;
> -				goto err2;
> -			}
> -			glue->control_otghs = &control_pdev->dev;
> -		}
> +		ret = omap2430_get_control(glue, np);
> +		if (ret)
> +			goto err2;
> +
>  	}
>  	pdata->platform_ops		= &omap2430_ops;
>  

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tony Lindgren June 24, 2015, 11:49 a.m. UTC | #2
* Kishon Vijay Abraham I <kishon@ti.com> [150623 05:02]:
> Deprecate using phy-omap-control driver to write to the mailbox register
> and start using *syscon* framework to do the same.

All this stuff needs to go to some generic syscon USB phy
driver. Let's not start adding phy specific stuff to a USB
driver.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I June 24, 2015, 1:06 p.m. UTC | #3
Hi Tony,

On Wednesday 24 June 2015 05:19 PM, Tony Lindgren wrote:
> * Kishon Vijay Abraham I <kishon@ti.com> [150623 05:02]:
>> Deprecate using phy-omap-control driver to write to the mailbox register
>> and start using *syscon* framework to do the same.
> 
> All this stuff needs to go to some generic syscon USB phy
> driver. Let's not start adding phy specific stuff to a USB
> driver.

Mailbox register is actually part of OMAP USB glue that should be written in
order to inform the usbmode to the MUSB core.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I June 24, 2015, 1:21 p.m. UTC | #4
Hi,

On Wednesday 24 June 2015 05:09 PM, Roger Quadros wrote:
> On Tue, 23 Jun 2015 17:28:52 +0530
> Kishon Vijay Abraham I <kishon@ti.com> wrote:
> 
>> Deprecate using phy-omap-control driver to write to the mailbox register
>> and start using *syscon* framework to do the same.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  Documentation/devicetree/bindings/usb/omap-usb.txt |    7 +-
>>  drivers/usb/musb/omap2430.c                        |  118 ++++++++++++++++----
>>  2 files changed, 102 insertions(+), 23 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
>> index 38d9bb8..c001306 100644
>> --- a/Documentation/devicetree/bindings/usb/omap-usb.txt
>> +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
>> @@ -20,10 +20,15 @@ OMAP MUSB GLUE
>>   - phy-names : the names of the PHY corresponding to the PHYs present in the
>>     *phy* phandle.
>>  
>> -Optional properties:
>> +Optional Properties:
>> +Deprecated properties:
>>   - ctrl-module : phandle of the control module this glue uses to write to
>>     mailbox
>>  
>> +Recommended properies:
>> + - syscon-otghs : phandle/offset pair. Phandle to the system control module and the
>> +   register offset of the mailbox.
>> +
>>  SOC specific device node entry
>>  usb_otg_hs: usb_otg_hs@4a0ab000 {
>>  	compatible = "ti,omap4-musb";
>> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
>> index cc752d8..bcd6d1e 100644
>> --- a/drivers/usb/musb/omap2430.c
>> +++ b/drivers/usb/musb/omap2430.c
>> @@ -39,16 +39,27 @@
>>  #include <linux/usb/musb-omap.h>
>>  #include <linux/phy/omap_control_phy.h>
>>  #include <linux/of_platform.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>>  
>>  #include "musb_core.h"
>>  #include "omap2430.h"
>>  
>> +#define OMAP2430_MUSB_MODE_MASK	0x1f
>> +#define OMAP2430_MUSB_AVALID	(0x1 << 0)
>> +#define OMAP2430_MUSB_BVALID	(0x1 << 1)
>> +#define OMAP2430_MUSB_VBUSVALID	(0x1 << 2)
>> +#define OMAP2430_MUSB_SESSEND	(0x1 << 3)
>> +#define OMAP2430_MUSB_IDDIG	(0x1 << 4)
>> +
>>  struct omap2430_glue {
>>  	struct device		*dev;
>>  	struct platform_device	*musb;
>>  	enum omap_musb_vbus_id_status status;
>>  	struct work_struct	omap_musb_mailbox_work;
>>  	struct device		*control_otghs;
>> +	struct regmap		*syscon_otghs; /* ctrl. reg. acces */
>> +	unsigned int            otghs_reg; /* otghs reg. index within syscon */
>>  };
>>  #define glue_to_musb(g)		platform_get_drvdata(g->musb)
>>  
>> @@ -253,6 +264,47 @@ void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
>>  }
>>  EXPORT_SYMBOL_GPL(omap_musb_mailbox);
>>  
>> +static void omap2430_musb_set_usbmode(struct omap2430_glue *glue,
>> +				      enum omap_control_usb_mode mode)
>> +{
>> +	u32 val;
>> +	int ret;
>> +
>> +	if (glue->syscon_otghs) {
>> +		switch (mode) {
>> +		case USB_MODE_HOST:
>> +			val = OMAP2430_MUSB_AVALID | OMAP2430_MUSB_VBUSVALID;
>> +			break;
>> +
>> +		case USB_MODE_DEVICE:
>> +			val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_AVALID |
>> +				OMAP2430_MUSB_VBUSVALID;
>> +			break;
>> +
>> +		case USB_MODE_DISCONNECT:
>> +			val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_SESSEND;
>> +			break;
>> +
>> +		default:
>> +			dev_dbg(glue->dev, "Invalid mode\n");
>> +			goto err_regmap_update;
>> +		}
>> +
>> +		ret = regmap_update_bits(glue->syscon_otghs,
>> +					 glue->otghs_reg,
>> +					 OMAP2430_MUSB_MODE_MASK, val);
>> +		if (ret < 0)
>> +			goto err_regmap_update;
>> +	} else {
>> +		omap_control_usb_set_mode(glue->control_otghs, mode);
>> +	}
>> +
>> +	return;
>> +
>> +err_regmap_update:
>> +	dev_err(glue->dev, "Failed to set mode to %d\n", mode);
>> +}
>> +
>>  static void omap_musb_set_mailbox(struct omap2430_glue *glue)
>>  {
>>  	struct musb *musb = glue_to_musb(glue);
>> @@ -270,8 +322,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
>>  		musb->xceiv->last_event = USB_EVENT_ID;
>>  		if (musb->gadget_driver) {
>>  			pm_runtime_get_sync(dev);
>> -			omap_control_usb_set_mode(glue->control_otghs,
>> -				USB_MODE_HOST);
>> +			omap2430_musb_set_usbmode(glue, USB_MODE_HOST);
>>  			omap2430_musb_set_vbus(musb, 1);
>>  		}
>>  		break;
>> @@ -284,7 +335,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
>>  		musb->xceiv->last_event = USB_EVENT_VBUS;
>>  		if (musb->gadget_driver)
>>  			pm_runtime_get_sync(dev);
>> -		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
>> +		omap2430_musb_set_usbmode(glue, USB_MODE_DEVICE);
>>  		break;
>>  
>>  	case OMAP_MUSB_ID_FLOAT:
>> @@ -301,8 +352,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
>>  		if (data->interface_type == MUSB_INTERFACE_UTMI)
>>  			otg_set_vbus(musb->xceiv->otg, 0);
>>  
>> -		omap_control_usb_set_mode(glue->control_otghs,
>> -			USB_MODE_DISCONNECT);
>> +		omap2430_musb_set_usbmode(glue, USB_MODE_DISCONNECT);
>>  		break;
>>  	default:
>>  		dev_dbg(dev, "ID float\n");
>> @@ -444,7 +494,7 @@ static void omap2430_musb_enable(struct musb *musb)
>>  	switch (glue->status) {
>>  
>>  	case OMAP_MUSB_ID_GROUND:
>> -		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
>> +		omap2430_musb_set_usbmode(glue, USB_MODE_HOST);
>>  		if (data->interface_type != MUSB_INTERFACE_UTMI)
>>  			break;
>>  		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
>> @@ -463,7 +513,7 @@ static void omap2430_musb_enable(struct musb *musb)
>>  		break;
>>  
>>  	case OMAP_MUSB_VBUS_VALID:
>> -		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
>> +		omap2430_musb_set_usbmode(glue, USB_MODE_DEVICE);
>>  		break;
>>  
>>  	default:
>> @@ -477,8 +527,7 @@ static void omap2430_musb_disable(struct musb *musb)
>>  	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
>>  
>>  	if (glue->status != OMAP_MUSB_UNKNOWN)
>> -		omap_control_usb_set_mode(glue->control_otghs,
>> -			USB_MODE_DISCONNECT);
>> +		omap2430_musb_set_usbmode(glue, USB_MODE_DISCONNECT);
>>  }
>>  
>>  static int omap2430_musb_exit(struct musb *musb)
>> @@ -507,6 +556,40 @@ static const struct musb_platform_ops omap2430_ops = {
>>  
>>  static u64 omap2430_dmamask = DMA_BIT_MASK(32);
>>  
>> +static int omap2430_get_control(struct omap2430_glue *glue,
>> +				struct device_node *np)
>> +{
>> +	struct device_node *control_node;
>> +	struct platform_device *control_pdev;
>> +
>> +	glue->syscon_otghs = syscon_regmap_lookup_by_phandle(np,
>> +							     "syscon-otghs");
>> +	if (IS_ERR(glue->syscon_otghs)) {
>> +		dev_info(glue->dev, "can't get syscon, using control device\n");
> 
> dev_dbg().

Alright.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 38d9bb8..c001306 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -20,10 +20,15 @@  OMAP MUSB GLUE
  - phy-names : the names of the PHY corresponding to the PHYs present in the
    *phy* phandle.
 
-Optional properties:
+Optional Properties:
+Deprecated properties:
  - ctrl-module : phandle of the control module this glue uses to write to
    mailbox
 
+Recommended properies:
+ - syscon-otghs : phandle/offset pair. Phandle to the system control module and the
+   register offset of the mailbox.
+
 SOC specific device node entry
 usb_otg_hs: usb_otg_hs@4a0ab000 {
 	compatible = "ti,omap4-musb";
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index cc752d8..bcd6d1e 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -39,16 +39,27 @@ 
 #include <linux/usb/musb-omap.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
 
+#define OMAP2430_MUSB_MODE_MASK	0x1f
+#define OMAP2430_MUSB_AVALID	(0x1 << 0)
+#define OMAP2430_MUSB_BVALID	(0x1 << 1)
+#define OMAP2430_MUSB_VBUSVALID	(0x1 << 2)
+#define OMAP2430_MUSB_SESSEND	(0x1 << 3)
+#define OMAP2430_MUSB_IDDIG	(0x1 << 4)
+
 struct omap2430_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
 	enum omap_musb_vbus_id_status status;
 	struct work_struct	omap_musb_mailbox_work;
 	struct device		*control_otghs;
+	struct regmap		*syscon_otghs; /* ctrl. reg. acces */
+	unsigned int            otghs_reg; /* otghs reg. index within syscon */
 };
 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
@@ -253,6 +264,47 @@  void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 }
 EXPORT_SYMBOL_GPL(omap_musb_mailbox);
 
+static void omap2430_musb_set_usbmode(struct omap2430_glue *glue,
+				      enum omap_control_usb_mode mode)
+{
+	u32 val;
+	int ret;
+
+	if (glue->syscon_otghs) {
+		switch (mode) {
+		case USB_MODE_HOST:
+			val = OMAP2430_MUSB_AVALID | OMAP2430_MUSB_VBUSVALID;
+			break;
+
+		case USB_MODE_DEVICE:
+			val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_AVALID |
+				OMAP2430_MUSB_VBUSVALID;
+			break;
+
+		case USB_MODE_DISCONNECT:
+			val = OMAP2430_MUSB_IDDIG | OMAP2430_MUSB_SESSEND;
+			break;
+
+		default:
+			dev_dbg(glue->dev, "Invalid mode\n");
+			goto err_regmap_update;
+		}
+
+		ret = regmap_update_bits(glue->syscon_otghs,
+					 glue->otghs_reg,
+					 OMAP2430_MUSB_MODE_MASK, val);
+		if (ret < 0)
+			goto err_regmap_update;
+	} else {
+		omap_control_usb_set_mode(glue->control_otghs, mode);
+	}
+
+	return;
+
+err_regmap_update:
+	dev_err(glue->dev, "Failed to set mode to %d\n", mode);
+}
+
 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 {
 	struct musb *musb = glue_to_musb(glue);
@@ -270,8 +322,7 @@  static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		musb->xceiv->last_event = USB_EVENT_ID;
 		if (musb->gadget_driver) {
 			pm_runtime_get_sync(dev);
-			omap_control_usb_set_mode(glue->control_otghs,
-				USB_MODE_HOST);
+			omap2430_musb_set_usbmode(glue, USB_MODE_HOST);
 			omap2430_musb_set_vbus(musb, 1);
 		}
 		break;
@@ -284,7 +335,7 @@  static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		musb->xceiv->last_event = USB_EVENT_VBUS;
 		if (musb->gadget_driver)
 			pm_runtime_get_sync(dev);
-		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
+		omap2430_musb_set_usbmode(glue, USB_MODE_DEVICE);
 		break;
 
 	case OMAP_MUSB_ID_FLOAT:
@@ -301,8 +352,7 @@  static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		if (data->interface_type == MUSB_INTERFACE_UTMI)
 			otg_set_vbus(musb->xceiv->otg, 0);
 
-		omap_control_usb_set_mode(glue->control_otghs,
-			USB_MODE_DISCONNECT);
+		omap2430_musb_set_usbmode(glue, USB_MODE_DISCONNECT);
 		break;
 	default:
 		dev_dbg(dev, "ID float\n");
@@ -444,7 +494,7 @@  static void omap2430_musb_enable(struct musb *musb)
 	switch (glue->status) {
 
 	case OMAP_MUSB_ID_GROUND:
-		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
+		omap2430_musb_set_usbmode(glue, USB_MODE_HOST);
 		if (data->interface_type != MUSB_INTERFACE_UTMI)
 			break;
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
@@ -463,7 +513,7 @@  static void omap2430_musb_enable(struct musb *musb)
 		break;
 
 	case OMAP_MUSB_VBUS_VALID:
-		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
+		omap2430_musb_set_usbmode(glue, USB_MODE_DEVICE);
 		break;
 
 	default:
@@ -477,8 +527,7 @@  static void omap2430_musb_disable(struct musb *musb)
 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 
 	if (glue->status != OMAP_MUSB_UNKNOWN)
-		omap_control_usb_set_mode(glue->control_otghs,
-			USB_MODE_DISCONNECT);
+		omap2430_musb_set_usbmode(glue, USB_MODE_DISCONNECT);
 }
 
 static int omap2430_musb_exit(struct musb *musb)
@@ -507,6 +556,40 @@  static const struct musb_platform_ops omap2430_ops = {
 
 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
 
+static int omap2430_get_control(struct omap2430_glue *glue,
+				struct device_node *np)
+{
+	struct device_node *control_node;
+	struct platform_device *control_pdev;
+
+	glue->syscon_otghs = syscon_regmap_lookup_by_phandle(np,
+							     "syscon-otghs");
+	if (IS_ERR(glue->syscon_otghs)) {
+		dev_info(glue->dev, "can't get syscon, using control device\n");
+		glue->syscon_otghs = NULL;
+
+		control_node = of_parse_phandle(np, "ctrl-module", 0);
+		if (control_node) {
+			control_pdev = of_find_device_by_node(control_node);
+			if (!control_pdev) {
+				dev_err(glue->dev,
+					"Failed to get control device\n");
+				return -EINVAL;
+			}
+			glue->control_otghs = &control_pdev->dev;
+		}
+	} else {
+		if (of_property_read_u32_index(np, "syscon-otghs", 1,
+					       &glue->otghs_reg)) {
+			dev_err(glue->dev,
+				"couldn't get otghs reg. offset\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
 static int omap2430_probe(struct platform_device *pdev)
 {
 	struct resource			musb_resources[3];
@@ -538,9 +621,6 @@  static int omap2430_probe(struct platform_device *pdev)
 	glue->control_otghs = ERR_PTR(-ENODEV);
 
 	if (np) {
-		struct device_node *control_node;
-		struct platform_device *control_pdev;
-
 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 		if (!pdata)
 			goto err2;
@@ -567,16 +647,10 @@  static int omap2430_probe(struct platform_device *pdev)
 		pdata->board_data	= data;
 		pdata->config		= config;
 
-		control_node = of_parse_phandle(np, "ctrl-module", 0);
-		if (control_node) {
-			control_pdev = of_find_device_by_node(control_node);
-			if (!control_pdev) {
-				dev_err(&pdev->dev, "Failed to get control device\n");
-				ret = -EINVAL;
-				goto err2;
-			}
-			glue->control_otghs = &control_pdev->dev;
-		}
+		ret = omap2430_get_control(glue, np);
+		if (ret)
+			goto err2;
+
 	}
 	pdata->platform_ops		= &omap2430_ops;