From patchwork Thu Apr 18 17:24:09 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 1925134 X-Patchwork-Delegate: caleb.connolly@linaro.org Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=wOugneI8; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4VL4Qg4TjXz1ymh for ; Fri, 19 Apr 2024 03:24:43 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id B288D8868B; Thu, 18 Apr 2024 19:24:33 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="wOugneI8"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 504DC88695; Thu, 18 Apr 2024 19:24:32 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.2 Received: from mail-wm1-x333.google.com (mail-wm1-x333.google.com [IPv6:2a00:1450:4864:20::333]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 06F9E88648 for ; Thu, 18 Apr 2024 19:24:29 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-wm1-x333.google.com with SMTP id 5b1f17b1804b1-418effbc70cso5551815e9.0 for ; Thu, 18 Apr 2024 10:24:29 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1713461068; x=1714065868; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=NCv69hjOiyf3kF7VwxE17UXnNC3z7hoovbBkUt6q+w8=; b=wOugneI8gAfC8LvGJAlJgWQTvR9J3S63wSXqobpx0OjN6Lktw+7raTTgyI8k9zArXS V0lTBzusL/kYBnKN4RMqoiM1WwytCvu6WNQ6fuIkq9BL75DGep3OjRodNhq+lO86Lnsy JGPEfUuXpIlAwVSFHw4iTUdqpYIRBgk2ZJSxXH6YgnwaAxJlhlsY5JN+GzsruEAxU7k2 2S82mgJ75vuF1B5fdAn1fhg0zsbnVNc/977RQ9KGdasyUjzv5Kq5QzGlGpBF6EdG8xo9 G+V6yRVIKR3YbgnjzEA4cGE38/tj8QOsI4///OLYclvFkItEA8NDXcOYF1QGNSXyTyKH /Pjw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1713461068; x=1714065868; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=NCv69hjOiyf3kF7VwxE17UXnNC3z7hoovbBkUt6q+w8=; b=D9GF/MKKk2o3j6eh6KxQBGazut0TjcjZxqmVrrVZsHYgA3MDm1aruvYGpOCkZPhDXt wdrnyqPnc5Cx1Qnq2GpJ4D+eCeEQ+vDrzLujvT4CwWRi9F3o6ddjFrSJ3eN3wZpYHWZ+ WB5zVINpa4XL+NUtfBMFLBt7COx4uK34P7p610RMSlXpz1sbKd3Af2qYb3l+4nOg7hf2 AXjQ5PIFgNK0bFrltpk6e5Du6al0Due54NGt2Rj2IoWsxwd5nVTPVMllHUl2eywiv/zO DK+Z9ubvKrcXrZg6ZYG6kXKk0pc0+NpXuBIy2/cvI6YevkObdlHtaUNQq4bB/fmuhr7y Mw+g== X-Forwarded-Encrypted: i=1; AJvYcCXThAFxeHnm8Zl8BJ++FSjQfeU+fbSOpspNmXT7LTFl7YWEX6XIHcmiz/AktFFZ6pd9GPfbnfKud3q9QSuguPIGVBSkrw== X-Gm-Message-State: AOJu0Yyz9isgEIBGACX/92jpCnC+0tI/f2gng85NTC6hpJ1PcTaVcEwS u8Lsyku8TUZGTzoJ8OxPFIsgwi+SMe3edB/Hr8AWmeSsiUVxmwYkMWTxWe3jeu4= X-Google-Smtp-Source: AGHT+IEcN+nhl9KvpmvKq3pkrHOHsqOj5jnQixJ2hk4C2RRIo9rQNYSdaENPD8R6POrDC7gJK1HzvA== X-Received: by 2002:adf:e40e:0:b0:34a:3eec:c379 with SMTP id g14-20020adfe40e000000b0034a3eecc379mr450197wrm.67.1713461068531; Thu, 18 Apr 2024 10:24:28 -0700 (PDT) Received: from lion.localdomain (host-92-17-96-232.as13285.net. [92.17.96.232]) by smtp.gmail.com with ESMTPSA id e32-20020a5d5960000000b0033ec9ddc638sm2301799wri.31.2024.04.18.10.24.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 18 Apr 2024 10:24:28 -0700 (PDT) From: Caleb Connolly Date: Thu, 18 Apr 2024 18:24:09 +0100 Subject: [PATCH 1/3] mach-snapdragon: use OF_UPSTREAM MIME-Version: 1.0 Message-Id: <20240418-b4-qcom-rbx-fixes-v1-1-e524eb29ae86@linaro.org> References: <20240418-b4-qcom-rbx-fixes-v1-0-e524eb29ae86@linaro.org> In-Reply-To: <20240418-b4-qcom-rbx-fixes-v1-0-e524eb29ae86@linaro.org> To: Neil Armstrong , Sumit Garg , Tom Rini , Marek Vasut , Rayagonda Kokatanur , Ramon Fried , Jorge Ramirez-Ortiz Cc: u-boot-qcom@groups.io, u-boot@lists.denx.de, Caleb Connolly X-Mailer: b4 0.14-dev X-Developer-Signature: v=1; a=openpgp-sha256; l=3079; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=WF+sZc5b4ZbL2H6/0LLnd6+9nclokPuGKq4/bLJMi70=; b=owGbwMvMwCFYaeA6f6eBkTjjabUkhjTFcK81JVUnp81xnXG/rDF3Uf6LsPaM8oL1Z/891Obxv iSz7lpSRykLgyAHg6yYIov4iWWWTWsv22tsX3ABZg4rE8gQBi5OAZiIrjEjw7yc8ulKBXZv1/Ut 7bqg6yxjUXGsOtni8zZJrYn987O0pjL8d2Iu97kmkFoR0//Xam7QD7mDITkPtSKKG1a/UOB9e0r /EgA= X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Switch to using upstream DT from dts/upstream. Signed-off-by: Caleb Connolly Reviewed-by: Neil Armstrong --- MAINTAINERS | 4 ---- arch/arm/Kconfig | 1 + configs/dragonboard410c_defconfig | 2 +- configs/dragonboard820c_defconfig | 2 +- configs/qcom_defconfig | 2 +- 5 files changed, 4 insertions(+), 7 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index c0d2b5138fca..d0a4a28b401d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -605,12 +605,8 @@ M: Neil Armstrong R: Sumit Garg L: u-boot-qcom@groups.io S: Maintained T: git https://source.denx.de/u-boot/custodians/u-boot-snapdragon.git -F: arch/arm/dts/msm8*.dtsi -F: arch/arm/dts/pm8???.dtsi -F: arch/arm/dts/pms405.dtsi -F: arch/arm/dts/sdm845.dtsi F: drivers/*/*/pm8???-* F: drivers/gpio/msm_gpio.c F: drivers/mmc/msm_sdhci.c F: drivers/phy/msm8916-usbh-phy.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 23ee25269a24..2931c82eb11f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1088,8 +1088,9 @@ config ARCH_SNAPDRAGON select BOARD_LATE_INIT select OF_BOARD select SAVE_PREV_BL_FDT_ADDR select LINUX_KERNEL_IMAGE_HEADER + imply OF_UPSTREAM imply CMD_DM config ARCH_SOCFPGA bool "Altera SOCFPGA family" diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig index 260a8349d3b2..9ef04fd45546 100644 --- a/configs/dragonboard410c_defconfig +++ b/configs/dragonboard410c_defconfig @@ -8,9 +8,9 @@ CONFIG_SYS_MALLOC_LEN=0x802000 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x0 -CONFIG_DEFAULT_DEVICE_TREE="apq8016-sbc" +CONFIG_DEFAULT_DEVICE_TREE="qcom/apq8016-sbc" CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C" CONFIG_SYS_LOAD_ADDR=0x80080000 CONFIG_REMAKE_ELF=y diff --git a/configs/dragonboard820c_defconfig b/configs/dragonboard820c_defconfig index ebc80eb2a464..f6b2cb09ba31 100644 --- a/configs/dragonboard820c_defconfig +++ b/configs/dragonboard820c_defconfig @@ -6,9 +6,9 @@ CONFIG_TEXT_BASE=0x80080000 CONFIG_SYS_MALLOC_LEN=0x804000 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0 CONFIG_ENV_SIZE=0x4000 -CONFIG_DEFAULT_DEVICE_TREE="apq8096-db820c" +CONFIG_DEFAULT_DEVICE_TREE="qcom/apq8096-db820c" CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 820C" CONFIG_SYS_LOAD_ADDR=0x80080000 CONFIG_DISTRO_DEFAULTS=y CONFIG_USE_BOOTARGS=y diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index ee3ed89cbc8a..218a9a769682 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -1,9 +1,9 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_POSITION_INDEPENDENT=y CONFIG_ARCH_SNAPDRAGON=y -CONFIG_DEFAULT_DEVICE_TREE="sdm845-db845c" +CONFIG_DEFAULT_DEVICE_TREE="qcom/sdm845-db845c" CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_BUTTON_CMD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y From patchwork Thu Apr 18 17:24:10 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 1925146 X-Patchwork-Delegate: caleb.connolly@linaro.org Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=Fgh8Tr5X; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1) server-digest SHA384) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4VL4cX6vtfz1yZY for ; Fri, 19 Apr 2024 03:33:16 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id A0F71886C2; Thu, 18 Apr 2024 19:33:10 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="Fgh8Tr5X"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 2157E8868F; Thu, 18 Apr 2024 19:24:45 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.2 Received: from mail-wr1-x429.google.com (mail-wr1-x429.google.com [IPv6:2a00:1450:4864:20::429]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id D2A8D88691 for ; Thu, 18 Apr 2024 19:24:31 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-wr1-x429.google.com with SMTP id ffacd0b85a97d-34a00533d08so763597f8f.3 for ; Thu, 18 Apr 2024 10:24:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1713461071; x=1714065871; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=OuEkBTJJseGyADikNMu6CpWChUDXsVtK8OHnzdjjuaM=; b=Fgh8Tr5XW4f9G+7tedkEzj1joDbUSjYL83bflnqvI7Mx66w5BXbQd4XpYxT9sFlFr4 z/0Lg2nLaW90iJYUU4H2QSGrOKLc5wJpiUtSblvUMg2V+whXdxcQrk1x+hRQlz0/XWWg mkDmlSkbhE8FmXsCPC4+9ikUTfuDipAugS8Cof9OKohsiiMXu+4NdjbkAkVPBdAQbJbC m5knqTxsyqZnDJt2jmott65gO01NgX41ZjcBXa393hHY/rl3vwyyDy14W7ftNC1ee4es Ir3ocMI1+yThN/YLPyAe62mAt8Fpk0DSR8BWmV/xk0gEuOEnUSIBOQEOM3q9U3oUPHuu X5TQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1713461071; x=1714065871; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=OuEkBTJJseGyADikNMu6CpWChUDXsVtK8OHnzdjjuaM=; b=R7PtNiyGpQTk16SemwTs+wQaCtGCCnT8kR1ZVG745tddwZJQENln2r1rGP3oV0N7p6 geQt/2RjjtGRoaOpWedkPTZ9ILdjugd7R7B/sBLzU4mjG1KggsIIqvnqsJcHmakgLpp4 15eArBiZw+R3UdVCkXzayjPuX5jmCHSlOu0jtjeGMKTgBHofO966VkaQgl42WS4RkDv0 nzu8HXlMEdJsDGJReWiXG82VWDjLEfxJRXRBPG2N2QRdfh7oiP+Qx1hw54Mew0gocwzK IoiWlvNkhd+BgQ4PIjTl0w+Jbqzke2yiyPvQKvJsv8Y8iBqotoEh+7M/dFaCFDEa8jtm 6MvQ== X-Forwarded-Encrypted: i=1; AJvYcCWToIksM7tmeR1RvhULevOQGov56ZCsVZ4RkPEwDfJcFudjDkxbc7WNbGJZGVXOM7zNKKXbsjZQE1vIwF2oKzNKQYZyQw== X-Gm-Message-State: AOJu0Yx9TQsuQG6SUGBTgnaNxoCyB1zHgakX7liYuvCDg760JF9/GEeC cab6E0Hol+PjnDmi2KFbIWiIzucJdYksEtNSsDnZhc+r4ZFgmfVSsfgCLJGebeA= X-Google-Smtp-Source: AGHT+IHdMEEJfbXiQajMFnuvCp51iJuYirG34y/gLqc8Y7riQTySsW3w503tNxN3dIUi3NpFakhvEA== X-Received: by 2002:adf:f1ca:0:b0:346:662f:62b7 with SMTP id z10-20020adff1ca000000b00346662f62b7mr2730792wro.71.1713461070347; Thu, 18 Apr 2024 10:24:30 -0700 (PDT) Received: from lion.localdomain (host-92-17-96-232.as13285.net. [92.17.96.232]) by smtp.gmail.com with ESMTPSA id e32-20020a5d5960000000b0033ec9ddc638sm2301799wri.31.2024.04.18.10.24.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 18 Apr 2024 10:24:29 -0700 (PDT) From: Caleb Connolly Date: Thu, 18 Apr 2024 18:24:10 +0100 Subject: [PATCH 2/3] arm: dts: drop qcom dts files MIME-Version: 1.0 Message-Id: <20240418-b4-qcom-rbx-fixes-v1-2-e524eb29ae86@linaro.org> References: <20240418-b4-qcom-rbx-fixes-v1-0-e524eb29ae86@linaro.org> In-Reply-To: <20240418-b4-qcom-rbx-fixes-v1-0-e524eb29ae86@linaro.org> To: Neil Armstrong , Sumit Garg , Tom Rini , Marek Vasut , Rayagonda Kokatanur , Ramon Fried , Jorge Ramirez-Ortiz Cc: u-boot-qcom@groups.io, u-boot@lists.denx.de, Caleb Connolly X-Mailer: b4 0.14-dev X-Developer-Signature: v=1; a=openpgp-sha256; l=490255; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=RwBdgzEVI+aiaHBmaJvNBM3M02yHSRidntMhSB8moA4=; b=owGbwMvMwCFYaeA6f6eBkTjjabUkhjTFcK/PpuKNryRXHJxuIB6b8dSoU8vOqHdTsPES7U/fe LLic5o7SlkYBDkYZMUUWcRPLLNsWnvZXmP7ggswc1iZQIYwcHEKwEQUljIydLiK6tdJBGsEOTnp BHVOW6f0/cWUiDJtYxa2ZRoFb8LPMfzhkP0TcolX3NAk4PLSClaZb6GS0nFMK+zWPflw+vq5Dwv tAQ== X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-Mailman-Approved-At: Thu, 18 Apr 2024 19:33:08 +0200 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean These files are all identical (or older) than those in dts/upstream. Drop them as we now use upstream DTS files with OF_UPSTREAM. Signed-off-by: Caleb Connolly Reviewed-by: Neil Armstrong --- arch/arm/dts/apq8016-sbc.dts | 729 ---- arch/arm/dts/apq8096-db820c.dts | 1137 ------ arch/arm/dts/msm8916-pm8916.dtsi | 157 - arch/arm/dts/msm8916.dtsi | 2702 ------------- arch/arm/dts/msm8996.dtsi | 3884 ------------------ arch/arm/dts/pm8916.dtsi | 178 - arch/arm/dts/pm8994.dtsi | 152 - arch/arm/dts/pm8998.dtsi | 130 - arch/arm/dts/pmi8994.dtsi | 65 - arch/arm/dts/pmi8998.dtsi | 98 - arch/arm/dts/pms405.dtsi | 149 - arch/arm/dts/qcs404-evb-4000.dts | 96 - arch/arm/dts/qcs404-evb.dtsi | 389 -- arch/arm/dts/qcs404.dtsi | 1829 --------- arch/arm/dts/sdm845-db845c.dts | 1190 ------ arch/arm/dts/sdm845-samsung-starqltechn.dts | 460 --- arch/arm/dts/sdm845-wcd9340.dtsi | 86 - arch/arm/dts/sdm845.dtsi | 5752 --------------------------- 18 files changed, 19183 deletions(-) diff --git a/arch/arm/dts/apq8016-sbc.dts b/arch/arm/dts/apq8016-sbc.dts deleted file mode 100644 index 9ffad7d1f2b6..000000000000 --- a/arch/arm/dts/apq8016-sbc.dts +++ /dev/null @@ -1,729 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2015, The Linux Foundation. All rights reserved. - */ - -/dts-v1/; - -#include "msm8916-pm8916.dtsi" -#include -#include -#include -#include -#include -#include - -/ { - model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; - compatible = "qcom,apq8016-sbc", "qcom,apq8016"; - - aliases { - mmc0 = &sdhc_1; /* eMMC */ - mmc1 = &sdhc_2; /* SD card */ - serial0 = &blsp_uart2; - serial1 = &blsp_uart1; - usid0 = &pm8916_0; - i2c0 = &blsp_i2c2; - i2c1 = &blsp_i2c6; - i2c3 = &blsp_i2c4; - spi0 = &blsp_spi5; - spi1 = &blsp_spi3; - }; - - chosen { - stdout-path = "serial0"; - }; - - reserved-memory { - ramoops@bff00000 { - compatible = "ramoops"; - reg = <0x0 0xbff00000 0x0 0x100000>; - - record-size = <0x20000>; - console-size = <0x20000>; - ftrace-size = <0x20000>; - }; - }; - - usb2513 { - compatible = "smsc,usb3503"; - reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; - initial-mode = <1>; - }; - - usb_id: usb-id { - compatible = "linux,extcon-usb-gpio"; - id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_id_default>; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7533_out>; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&msm_key_volp_n_default>; - - button { - label = "Volume Up"; - linux,code = ; - gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&tlmm_leds>, - <&pm8916_gpios_leds>, - <&pm8916_mpps_leds>; - - compatible = "gpio-leds"; - - led@1 { - label = "apq8016-sbc:green:user1"; - function = LED_FUNCTION_HEARTBEAT; - color = ; - gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led@2 { - label = "apq8016-sbc:green:user2"; - function = LED_FUNCTION_DISK_ACTIVITY; - color = ; - gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led@3 { - label = "apq8016-sbc:green:user3"; - function = LED_FUNCTION_DISK_ACTIVITY; - color = ; - gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - led@4 { - label = "apq8016-sbc:green:user4"; - color = ; - gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - panic-indicator; - default-state = "off"; - }; - - led@5 { - label = "apq8016-sbc:yellow:wlan"; - function = LED_FUNCTION_WLAN; - color = ; - gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - led@6 { - label = "apq8016-sbc:blue:bt"; - function = LED_FUNCTION_BLUETOOTH; - color = ; - gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; - }; -}; - -&blsp_i2c2 { - /* On Low speed expansion: LS-I2C0 */ - status = "okay"; -}; - -&blsp_i2c4 { - /* On High speed expansion: HS-I2C2 */ - status = "okay"; - - adv_bridge: bridge@39 { - status = "okay"; - - compatible = "adi,adv7533"; - reg = <0x39>; - - interrupt-parent = <&tlmm>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - - adi,dsi-lanes = <4>; - clocks = <&rpmcc RPM_SMD_BB_CLK2>; - clock-names = "cec"; - - pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; - - avdd-supply = <&pm8916_l6>; - a2vdd-supply = <&pm8916_l6>; - dvdd-supply = <&pm8916_l6>; - pvdd-supply = <&pm8916_l6>; - v1p2-supply = <&pm8916_l6>; - v3p3-supply = <&pm8916_l17>; - - pinctrl-names = "default","sleep"; - pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; - pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; - #sound-dai-cells = <1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7533_in: endpoint { - remote-endpoint = <&mdss_dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - adv7533_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; -}; - -&blsp_i2c6 { - /* On Low speed expansion: LS-I2C1 */ - status = "okay"; -}; - -&blsp_spi3 { - /* On High speed expansion: HS-SPI1 */ - status = "okay"; -}; - -&blsp_spi5 { - /* On Low speed expansion: LS-SPI0 */ - status = "okay"; -}; - -&blsp_uart1 { - status = "okay"; - label = "LS-UART0"; -}; - -&blsp_uart2 { - status = "okay"; - label = "LS-UART1"; -}; - -&camss { - status = "okay"; -}; - -&gpu { - status = "okay"; -}; - -&lpass { - status = "okay"; -}; - -&lpass_codec { - status = "okay"; -}; - -&mba_mem { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mdss_dsi0_out { - data-lanes = <0 1 2 3>; - remote-endpoint = <&adv7533_in>; -}; - -&mpss { - status = "okay"; - - firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn"; -}; - -&mpss_mem { - status = "okay"; - reg = <0x0 0x86800000 0x0 0x2b00000>; -}; - -&pm8916_codec { - status = "okay"; - qcom,mbhc-vthreshold-low = <75 150 237 450 500>; - qcom,mbhc-vthreshold-high = <75 150 237 450 500>; -}; - -&pm8916_resin { - status = "okay"; - linux,code = ; -}; - -&pm8916_rpm_regulators { - /* - * The 96Boards specification expects a 1.8V power rail on the low-speed - * expansion connector that is able to provide at least 0.18W / 100 mA. - * L15/L16 are connected in parallel to provide 55 mA each. A minimum load - * must be specified to ensure the regulators are not put in LPM where they - * would only provide 5 mA. - */ - pm8916_l15: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-system-load = <50000>; - regulator-allow-set-load; - regulator-always-on; - }; - pm8916_l16: l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-system-load = <50000>; - regulator-allow-set-load; - regulator-always-on; - }; - - pm8916_l17: l17 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&sdhc_1 { - status = "okay"; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_default &sdc2_cd_default>; - pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; - - cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; -}; - -&sound { - status = "okay"; - - pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; - pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; - pinctrl-names = "default", "sleep"; - model = "DB410c"; - audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; - - quaternary-dai-link { - link-name = "ADV7533"; - cpu { - sound-dai = <&lpass MI2S_QUATERNARY>; - }; - codec { - sound-dai = <&adv_bridge 0>; - }; - }; - - primary-dai-link { - link-name = "WCD"; - cpu { - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; - }; - }; - - tertiary-dai-link { - link-name = "WCD-Capture"; - cpu { - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; - }; - }; -}; - -&usb { - status = "okay"; - extcon = <&usb_id>, <&usb_id>; - - pinctrl-names = "default", "device"; - pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; - pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; -}; - -&usb_hs_phy { - extcon = <&usb_id>; -}; - -&venus { - status = "okay"; -}; - -&venus_mem { - status = "okay"; -}; - -&wcnss { - status = "okay"; - firmware-name = "qcom/apq8016/wcnss.mbn"; -}; - -&wcnss_ctrl { - firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; -}; - -&wcnss_iris { - compatible = "qcom,wcn3620"; -}; - -&wcnss_mem { - status = "okay"; -}; - -/* Enable CoreSight */ -&cti0 { status = "okay"; }; -&cti1 { status = "okay"; }; -&cti12 { status = "okay"; }; -&cti13 { status = "okay"; }; -&cti14 { status = "okay"; }; -&cti15 { status = "okay"; }; -&debug0 { status = "okay"; }; -&debug1 { status = "okay"; }; -&debug2 { status = "okay"; }; -&debug3 { status = "okay"; }; -&etf { status = "okay"; }; -&etm0 { status = "okay"; }; -&etm1 { status = "okay"; }; -&etm2 { status = "okay"; }; -&etm3 { status = "okay"; }; -&etr { status = "okay"; }; -&funnel0 { status = "okay"; }; -&funnel1 { status = "okay"; }; -&replicator { status = "okay"; }; -&stm { status = "okay"; }; -&tpiu { status = "okay"; }; - -/* - * 2mA drive strength is not enough when connecting multiple - * I2C devices with different pull up resistors. - */ -&blsp_i2c2_default { - drive-strength = <16>; -}; - -&blsp_i2c4_default { - drive-strength = <16>; -}; - -&blsp_i2c6_default { - drive-strength = <16>; -}; - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * HSEC = High Speed External Connector - * - * Line names are taken from the schematic "DragonBoard410c" - * dated monday, august 31, 2015. Page 5 in particular. - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -&tlmm { - gpio-line-names = - "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ - "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ - "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ - "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ - "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ - "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ - "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ - "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ - "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ - "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ - "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ - "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ - "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ - "[I2C3_SDA]", /* HSEC pin 38 */ - "[I2C3_SCL]", /* HSEC pin 36 */ - "[SPI0_MOSI]", /* LSEC pin 14 */ - "[SPI0_MISO]", /* LSEC pin 10 */ - "[SPI0_CS_N]", /* LSEC pin 12 */ - "[SPI0_CLK]", /* LSEC pin 8 */ - "HDMI_HPD_N", /* GPIO 20 */ - "USR_LED_1_CTRL", - "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ - "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ - "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ - "[CSI0_MCLK]", /* HSEC pin 15 */ - "[CSI1_MCLK]", /* HSEC pin 17 */ - "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ - "[I2C2_SDA]", /* HSEC pin 34 */ - "[I2C2_SCL]", /* HSEC pin 32 */ - "DSI2HDMI_INT_N", - "DSI_SW_SEL_APQ", - "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ - "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ - "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ - "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ - "FORCED_USB_BOOT", - "SD_CARD_DET_N", - "[WCSS_BT_SSBI]", - "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ - "[WCSS_WLAN_DATA_1]", - "[WCSS_WLAN_DATA_0]", - "[WCSS_WLAN_SET]", - "[WCSS_WLAN_CLK]", - "[WCSS_FM_SSBI]", - "[WCSS_FM_SDI]", - "[WCSS_BT_DAT_CTL]", - "[WCSS_BT_DAT_STB]", - "NC", - "NC", /* GPIO 50 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 60 */ - "NC", - "NC", - "[CDC_PDM0_CLK]", - "[CDC_PDM0_SYNC]", - "[CDC_PDM0_TX0]", - "[CDC_PDM0_RX0]", - "[CDC_PDM0_RX1]", - "[CDC_PDM0_RX2]", - "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ - "NC", /* GPIO 70 */ - "NC", - "NC", - "NC", - "NC", /* GPIO 74 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "BOOT_CONFIG_0", /* GPIO 80 */ - "BOOT_CONFIG_1", - "BOOT_CONFIG_2", - "BOOT_CONFIG_3", - "NC", - "NC", - "BOOT_CONFIG_5", - "NC", - "NC", - "NC", - "NC", /* GPIO 90 */ - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", /* GPIO 100 */ - "NC", - "NC", - "NC", - "SSBI_GPS", - "NC", - "NC", - "KEY_VOLP_N", - "NC", - "NC", - "[LS_EXP_MI2S_WS]", /* GPIO 110 */ - "NC", - "NC", - "[LS_EXP_MI2S_SCK]", - "[LS_EXP_MI2S_DATA0]", - "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ - "NC", - "[DSI2HDMI_MI2S_WS]", - "[DSI2HDMI_MI2S_SCK]", - "[DSI2HDMI_MI2S_DATA0]", - "USR_LED_2_CTRL", /* GPIO 120 */ - "SB_HS_ID"; - - sdc2_cd_default: sdc2-cd-default-state { - pins = "gpio38"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - tlmm_leds: tlmm-leds-state { - pins = "gpio21", "gpio120"; - function = "gpio"; - - output-low; - }; - - usb_id_default: usb-id-default-state { - pins = "gpio121"; - function = "gpio"; - - drive-strength = <8>; - bias-pull-up; - }; - - adv7533_int_active: adv533-int-active-state { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_int_suspend: adv7533-int-suspend-state { - pins = "gpio31"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - adv7533_switch_active: adv7533-switch-active-state { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - adv7533_switch_suspend: adv7533-switch-suspend-state { - pins = "gpio32"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - msm_key_volp_n_default: msm-key-volp-n-default-state { - pins = "gpio107"; - function = "gpio"; - - drive-strength = <8>; - bias-pull-up; - }; -}; - -&pm8916_gpios { - gpio-line-names = - "USR_LED_3_CTRL", - "USR_LED_4_CTRL", - "USB_HUB_RESET_N_PM", - "USB_SW_SEL_PM"; - - usb_hub_reset_pm: usb-hub-reset-pm-state { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - input-disable; - output-high; - }; - - usb_hub_reset_pm_device: usb-hub-reset-pm-device-state { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; - - usb_sw_sel_pm: usb-sw-sel-pm-state { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = ; - input-disable; - output-high; - }; - - usb_sw_sel_pm_device: usb-sw-sel-pm-device-state { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - - power-source = ; - input-disable; - output-low; - }; - - pm8916_gpios_leds: pm8916-gpios-leds-state { - pins = "gpio1", "gpio2"; - function = PMIC_GPIO_FUNC_NORMAL; - - output-low; - }; -}; - -&pm8916_mpps { - gpio-line-names = - "VDD_PX_BIAS", - "WLAN_LED_CTRL", - "BT_LED_CTRL", - "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f>; - - ls_exp_gpio_f: pm8916-mpp4-state { - pins = "mpp4"; - function = "digital"; - - output-low; - power-source = ; /* 1.8V */ - }; - - pm8916_mpps_leds: pm8916-mpps-state { - pins = "mpp2", "mpp3"; - function = "digital"; - - output-low; - }; -}; diff --git a/arch/arm/dts/apq8096-db820c.dts b/arch/arm/dts/apq8096-db820c.dts deleted file mode 100644 index e8148b3d6c50..000000000000 --- a/arch/arm/dts/apq8096-db820c.dts +++ /dev/null @@ -1,1137 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. - */ - -/dts-v1/; - -#include "msm8996.dtsi" -#include "pm8994.dtsi" -#include "pmi8994.dtsi" -#include -#include -#include -#include -#include -#include -#include - -/* - * GPIO name legend: proper name = the GPIO line is used as GPIO - * NC = not connected (pin out but not routed from the chip to - * anything the board) - * "[PER]" = pin is muxed for [peripheral] (not GPIO) - * LSEC = Low Speed External Connector - * P HSEC = Primary High Speed External Connector - * S HSEC = Secondary High Speed External Connector - * J14 = Camera Connector - * TP = Test Points - * - * Line names are taken from the schematic "DragonBoard 820c", - * drawing no: LM25-P2751-1 - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART3. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - -/ { - model = "Qualcomm Technologies, Inc. DB820c"; - compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096"; - - aliases { - serial0 = &blsp2_uart2; - serial1 = &blsp2_uart3; - serial2 = &blsp1_uart2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp2_i2c1; - i2c2 = &blsp2_i2c1; - spi0 = &blsp1_spi1; - spi1 = &blsp2_spi6; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - div1_mclk: divclk1 { - compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk>; - pinctrl-names = "default"; - clocks = <&rpmcc RPM_SMD_DIV_CLK1>; - #clock-cells = <0>; - enable-gpios = <&pm8994_gpios 15 0>; - }; - - divclk4: divclk4 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "divclk4"; - - pinctrl-names = "default"; - pinctrl-0 = <&divclk4_pin_a>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&volume_up_gpio>; - - button { - label = "Volume Up"; - linux,code = ; - gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; - }; - }; - - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; - }; - - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&pm8994_gpios 8 0>; - - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; -}; - -&blsp1_i2c3 { - /* On Low speed expansion: LS-I2C0 */ - status = "okay"; -}; - -&blsp1_spi1 { - /* On Low speed expansion */ - status = "okay"; -}; - -&blsp1_uart2 { - label = "BT-UART"; - status = "okay"; - - bluetooth { - compatible = "qcom,qca6174-bt"; - - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - - clocks = <&divclk4>; - }; -}; - -&adsp_pil { - status = "okay"; - firmware-name = "qcom/apq8096/adsp.mbn"; -}; - -&blsp2_i2c1 { - /* On High speed expansion: HS-I2C2 */ - status = "okay"; -}; - -&blsp2_i2c1 { - /* On Low speed expansion: LS-I2C1 */ - status = "okay"; -}; - -&blsp2_spi6 { - /* On High speed expansion */ - status = "okay"; -}; - -&blsp2_uart2 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_2pins_default>; - pinctrl-1 = <&blsp2_uart2_2pins_sleep>; -}; - -&blsp2_uart3 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart3_4pins_default>; - pinctrl-1 = <&blsp2_uart3_4pins_sleep>; -}; - -&camss { - vdda-supply = <&vreg_l2a_1p25>; -}; - -&gpu { - status = "okay"; -}; - -&hsusb_phy1 { - status = "okay"; - - vdd-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&hsusb_phy2 { - status = "okay"; - - vdd-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&mdp { - status = "okay"; -}; - -&mdss { - status = "okay"; -}; - -&mdss_hdmi { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; - - core-vdda-supply = <&vreg_l12a_1p8>; - core-vcc-supply = <&vreg_s4a_1p8>; -}; - -&mdss_hdmi_phy { - status = "okay"; - - vddio-supply = <&vreg_l12a_1p8>; - vcca-supply = <&vreg_l28a_0p925>; - #phy-cells = <0>; -}; - -&mmcc { - vdd-gfx-supply = <&vdd_gfx>; -}; - -&mss_pil { - status = "okay"; - pll-supply = <&vreg_l12a_1p8>; - firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn"; -}; - -&pm8994_resin { - status = "okay"; - linux,code = ; -}; - -&tlmm { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - - sdc2_cd_on: sdc2-cd-on-state { - pins = "gpio38"; - function = "gpio"; - bias-pull-up; - drive-strength = <16>; - }; - - sdc2_cd_off: sdc2-cd-off-state { - pins = "gpio38"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; - - hdmi_hpd_active: hdmi-hpd-active-state { - pins = "gpio34"; - function = "hdmi_hot"; - bias-pull-down; - drive-strength = <16>; - }; - - hdmi_hpd_suspend: hdmi-hpd-suspend-state { - pins = "gpio34"; - function = "hdmi_hot"; - bias-pull-down; - drive-strength = <2>; - }; - - hdmi_ddc_active: hdmi-ddc-active-state { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - drive-strength = <2>; - bias-pull-up; - }; - - hdmi_ddc_suspend: hdmi-ddc-suspend-state { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - drive-strength = <2>; - bias-pull-down; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie1 { - status = "okay"; - perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie2 { - status = "okay"; - perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; - vdda-supply = <&vreg_l28a_0p925>; -}; - -&pcie_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&pm8994_gpios { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - - ls_exp_gpio_f: pm8994-gpio5-state { - pinconf { - pins = "gpio5"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = ; /* 1.8V */ - }; - }; - - bt_en_gpios: bt-en-pios-state { - pinconf { - pins = "gpio19"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = ; /* 1.8V */ - qcom,drive-strength = ; - bias-pull-down; - }; - }; - - wlan_en_gpios: wlan-en-gpios-state { - pinconf { - pins = "gpio8"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = ; /* 1.8V */ - qcom,drive-strength = ; - bias-pull-down; - }; - }; - - audio_mclk: clk-div1-state { - pinconf { - pins = "gpio15"; - function = "func1"; - power-source = ; /* 1.8V */ - }; - }; - - volume_up_gpio: pm8996-gpio2-state { - pinconf { - pins = "gpio2"; - function = "normal"; - input-enable; - drive-push-pull; - bias-pull-up; - qcom,drive-strength = ; - power-source = ; /* 1.8V */ - }; - }; - - divclk4_pin_a: divclk4-state { - pinconf { - pins = "gpio18"; - function = PMIC_GPIO_FUNC_FUNC2; - - bias-disable; - power-source = ; - }; - }; - - usb3_vbus_det_gpio: pm8996-gpio22-state { - pinconf { - pins = "gpio22"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = ; - power-source = ; /* 1.8V */ - }; - }; -}; - -&pm8994_mpps { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; -}; - -&pm8994_spmi_regulators { - qcom,saw-reg = <&saw3>; - vdd_s11-supply = <&vph_pwr>; - - s9 { - qcom,saw-slave; - }; - s10 { - qcom,saw-slave; - }; - s11 { - qcom,saw-leader; - regulator-name = "VDD_APCC"; - regulator-always-on; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&pmi8994_gpios { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - - usb2_vbus_det_gpio: pmi8996-gpio6-state { - pinconf { - pins = "gpio6"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = ; - power-source = ; /* 1.8V */ - }; - }; -}; - -&pmi8994_lpg { - qcom,power-source = <1>; - - pinctrl-names = "default"; - pinctrl-0 = <&pmi8994_mpp2_userled4>; - - qcom,dtest = <0 0>, - <0 0>, - <0 0>, - <4 1>; - - status = "okay"; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <1>; - - linux,default-trigger = "heartbeat"; - default-state = "on"; - }; - - led@2 { - reg = <2>; - color = ; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <0>; - }; - - led@3 { - reg = <3>; - color = ; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <2>; - }; - - led@4 { - reg = <4>; - color = ; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <3>; - }; -}; - -&pmi8994_mpps { - pmi8994_mpp2_userled4: mpp2-userled4-state { - pins = "mpp2"; - function = "sink"; - - output-low; - qcom,dtest = <4>; - }; -}; - -&pmi8994_spmi_regulators { - vdd_s2-supply = <&vph_pwr>; - - vdd_gfx: s2 { - regulator-name = "VDD_GFX"; - regulator-min-microvolt = <980000>; - regulator-max-microvolt = <980000>; - }; -}; - -&rpm_requests { - regulators-0 { - compatible = "qcom,rpm-pm8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_l1-supply = <&vreg_s1b_1p025>; - vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; - vdd_l3_l11-supply = <&vreg_s3a_1p3>; - vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; - vdd_l5_l7-supply = <&vreg_s5a_2p15>; - vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; - vdd_l8_l16_l30-supply = <&vph_pwr>; - vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; - vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; - vdd_l14_l15-supply = <&vreg_s5a_2p15>; - vdd_l17_l29-supply = <&vph_pwr_bbyp>; - vdd_l20_l21-supply = <&vph_pwr_bbyp>; - vdd_l25-supply = <&vreg_s3a_1p3>; - vdd_lvs1_2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p3: s3 { - regulator-name = "vreg_s3a_1p3"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - vreg_s4a_1p8: s4 { - regulator-name = "vreg_s4a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - vreg_s5a_2p15: s5 { - regulator-name = "vreg_s5a_2p15"; - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - vreg_s7a_1p0: s7 { - regulator-name = "vreg_s7a_1p0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - vreg_l1a_1p0: l1 { - regulator-name = "vreg_l1a_1p0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l2a_1p25: l2 { - regulator-name = "vreg_l2a_1p25"; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - vreg_l3a_0p875: l3 { - regulator-name = "vreg_l3a_0p875"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - }; - vreg_l4a_1p225: l4 { - regulator-name = "vreg_l4a_1p225"; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - vreg_l6a_1p2: l6 { - regulator-name = "vreg_l6a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l8a_1p8: l8 { - regulator-name = "vreg_l8a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l9a_1p8: l9 { - regulator-name = "vreg_l9a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l10a_1p8: l10 { - regulator-name = "vreg_l10a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l11a_1p15: l11 { - regulator-name = "vreg_l11a_1p15"; - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - vreg_l12a_1p8: l12 { - regulator-name = "vreg_l12a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-name = "vreg_l13a_2p95"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - vreg_l14a_1p8: l14 { - regulator-name = "vreg_l14a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l15a_1p8: l15 { - regulator-name = "vreg_l15a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-name = "vreg_l16a_2p7"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - vreg_l17a_2p8: l17 { - regulator-name = "vreg_l17a_2p8"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - vreg_l18a_2p85: l18 { - regulator-name = "vreg_l18a_2p85"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2900000>; - }; - vreg_l19a_2p8: l19 { - regulator-name = "vreg_l19a_2p8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - vreg_l20a_2p95: l20 { - regulator-name = "vreg_l20a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-name = "vreg_l21a_2p95"; - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - vreg_l22a_3p0: l22 { - regulator-name = "vreg_l22a_3p0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - vreg_l23a_2p8: l23 { - regulator-name = "vreg_l23a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l24a_3p075: l24 { - regulator-name = "vreg_l24a_3p075"; - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - vreg_l25a_1p2: l25 { - regulator-name = "vreg_l25a_1p2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l26a_0p8: l27 { - regulator-name = "vreg_l26a_0p8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l28a_0p925: l28 { - regulator-name = "vreg_l28a_0p925"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-allow-set-load; - }; - vreg_l29a_2p8: l29 { - regulator-name = "vreg_l29a_2p8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - vreg_l30a_1p8: l30 { - regulator-name = "vreg_l30a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l32a_1p8: l32 { - regulator-name = "vreg_l32a_1p8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-name = "vreg_lvs1a_1p8"; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-name = "vreg_lvs2a_1p8"; - }; - }; - - regulators-1 { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - vph_pwr_bbyp: boost-bypass { - regulator-name = "vph_pwr_bbyp"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vreg_s1b_1p025: s1 { - regulator-name = "vreg_s1b_1p025"; - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; - }; - }; -}; - -&sdhc2 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>; - cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - status = "okay"; -}; - -&q6asmdai { - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; - - dai@2 { - reg = <2>; - }; -}; - -&slim_msm { - status = "okay"; - - slim@1 { - reg = <1>; - #address-cells = <2>; - #size-cells = <0>; - - tasha_ifd: tas-ifd@0,0 { - compatible = "slim217,1a0"; - reg = <0 0>; - }; - - wcd9335: codec@1,0 { - compatible = "slim217,1a0"; - reg = <1 0>; - - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr1", "intr2"; - interrupt-controller; - #interrupt-cells = <1>; - - pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; - pinctrl-names = "default"; - - reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; - slim-ifc-dev = <&tasha_ifd>; - - #sound-dai-cells = <1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; - }; - }; -}; - -&sound { - compatible = "qcom,apq8096-sndcard"; - model = "DB820c"; - audio-routing = "RX_BIAS", "MCLK", - "MM_DL1", "MultiMedia1 Playback", - "MM_DL2", "MultiMedia2 Playback", - "MultiMedia3 Capture", "MM_UL3"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - mm2-dai-link { - link-name = "MultiMedia2"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - }; - - mm3-dai-link { - link-name = "MultiMedia3"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; - }; - }; - - hdmi-dai-link { - link-name = "HDMI"; - cpu { - sound-dai = <&q6afedai HDMI_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&mdss_hdmi 0>; - }; - }; - - slim-dai-link { - link-name = "SLIM Playback"; - cpu { - sound-dai = <&q6afedai SLIMBUS_6_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 AIF4_PB>; - }; - }; - - slimcap-dai-link { - link-name = "SLIM Capture"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_TX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9335 AIF1_CAP>; - }; - }; -}; - -&ufsphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&ufshc { - status = "okay"; - - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l25a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - vdd-hba-supply = <&vreg_l25a_1p2>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; -}; - -&usb2 { - status = "okay"; - extcon = <&usb2_id>; -}; - -&usb2_dwc3 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; -}; - -&usb3 { - status = "okay"; - extcon = <&usb3_id>; -}; - -&usb3_dwc3 { - extcon = <&usb3_id>; - dr_mode = "otg"; -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l28a_0p925>; - vdda-pll-supply = <&vreg_l12a_1p8>; -}; - -&venus { - status = "okay"; -}; diff --git a/arch/arm/dts/msm8916-pm8916.dtsi b/arch/arm/dts/msm8916-pm8916.dtsi deleted file mode 100644 index b1a7eafbee31..000000000000 --- a/arch/arm/dts/msm8916-pm8916.dtsi +++ /dev/null @@ -1,157 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * msm8916-pm8916.dtsi describes common properties (e.g. regulator connections) - * that apply to most devices that make use of the MSM8916 SoC and PM8916 PMIC. - * Many regulators have a fixed purpose in the original reference design and - * were rarely re-used for different purposes. Devices that deviate from the - * typical reference design should not make use of this include and instead add - * the necessary properties in the board-specific device tree. - */ - -#include "msm8916.dtsi" -#include "pm8916.dtsi" - -&camss { - vdda-supply = <&pm8916_l2>; -}; - -&mdss_dsi0 { - vdda-supply = <&pm8916_l2>; - vddio-supply = <&pm8916_l6>; -}; - -&mdss_dsi0_phy { - vddio-supply = <&pm8916_l6>; -}; - -&mpss { - pll-supply = <&pm8916_l7>; -}; - -&pm8916_codec { - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; -}; - -&sdhc_1 { - vmmc-supply = <&pm8916_l8>; - vqmmc-supply = <&pm8916_l5>; -}; - -&sdhc_2 { - vmmc-supply = <&pm8916_l11>; - vqmmc-supply = <&pm8916_l12>; -}; - -&usb_hs_phy { - v1p8-supply = <&pm8916_l7>; - v3p3-supply = <&pm8916_l13>; -}; - -&wcnss { - vddpx-supply = <&pm8916_l7>; -}; - -&wcnss_iris { - vddxo-supply = <&pm8916_l7>; - vddrfa-supply = <&pm8916_s3>; - vddpa-supply = <&pm8916_l9>; - vdddig-supply = <&pm8916_l5>; -}; - -&rpm_requests { - pm8916_rpm_regulators: regulators { - compatible = "qcom,rpm-pm8916-regulators"; - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */ - - pm8916_s3: s3 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; /* Needed for L2 */ - }; - - pm8916_s4: s4 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <2150000>; - regulator-always-on; /* Needed for L5/L7 */ - }; - - /* - * Some of the regulators are unused or managed by another - * processor (e.g. the modem). We should still define nodes for - * them to ensure the vote from the application processor can be - * dropped in case the regulators are already on during boot. - * - * The labels for these nodes are omitted on purpose because - * boards should configure a proper voltage before using them. - */ - l1 {}; - - pm8916_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; /* Needed for LPDDR RAM */ - }; - - /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */ - - l4 {}; - - pm8916_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; /* Needed for most digital I/O */ - }; - - pm8916_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8916_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; /* Needed for CPU PLL */ - }; - - pm8916_l8: l8 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - }; - - pm8916_l9: l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l10 {}; - - pm8916_l11: l11 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pm8916_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pm8916_l13: l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - l14 {}; - l15 {}; - l16 {}; - l17 {}; - l18 {}; - }; -}; diff --git a/arch/arm/dts/msm8916.dtsi b/arch/arm/dts/msm8916.dtsi deleted file mode 100644 index 4f799b536a92..000000000000 --- a/arch/arm/dts/msm8916.dtsi +++ /dev/null @@ -1,2702 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the reg */ - reg = <0 0x80000000 0 0>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - tz-apps@86000000 { - reg = <0x0 0x86000000 0x0 0x300000>; - no-map; - }; - - smem@86300000 { - compatible = "qcom,smem"; - reg = <0x0 0x86300000 0x0 0x100000>; - no-map; - - hwlocks = <&tcsr_mutex 3>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - }; - - hypervisor@86400000 { - reg = <0x0 0x86400000 0x0 0x100000>; - no-map; - }; - - tz@86500000 { - reg = <0x0 0x86500000 0x0 0x180000>; - no-map; - }; - - reserved@86680000 { - reg = <0x0 0x86680000 0x0 0x80000>; - no-map; - }; - - rmtfs@86700000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0 0x86700000 0x0 0xe0000>; - no-map; - - qcom,client-id = <1>; - }; - - rfsa@867e0000 { - reg = <0x0 0x867e0000 0x0 0x20000>; - no-map; - }; - - mpss_mem: mpss@86800000 { - /* - * The memory region for the mpss firmware is generally - * relocatable and could be allocated dynamically. - * However, many firmware versions tend to fail when - * loaded to some special addresses, so it is hard to - * define reliable alloc-ranges. - * - * alignment = <0x0 0x400000>; - * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; - */ - reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */ - no-map; - status = "disabled"; - }; - - wcnss_mem: wcnss { - size = <0x0 0x600000>; - alignment = <0x0 0x100000>; - alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; - no-map; - status = "disabled"; - }; - - venus_mem: venus { - size = <0x0 0x500000>; - alignment = <0x0 0x100000>; - alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; - no-map; - status = "disabled"; - }; - - mba_mem: mba { - size = <0x0 0x100000>; - alignment = <0x0 0x100000>; - alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; - no-map; - status = "disabled"; - }; - }; - - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - clocks = <&apcs>; - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - power-domains = <&CPU_PD0>; - power-domain-names = "psci"; - qcom,acc = <&cpu0_acc>; - qcom,saw = <&cpu0_saw>; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x1>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - clocks = <&apcs>; - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - power-domains = <&CPU_PD1>; - power-domain-names = "psci"; - qcom,acc = <&cpu1_acc>; - qcom,saw = <&cpu1_saw>; - }; - - CPU2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x2>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - clocks = <&apcs>; - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - power-domains = <&CPU_PD2>; - power-domain-names = "psci"; - qcom,acc = <&cpu2_acc>; - qcom,saw = <&cpu2_saw>; - }; - - CPU3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x3>; - next-level-cache = <&L2_0>; - enable-method = "psci"; - clocks = <&apcs>; - operating-points-v2 = <&cpu_opp_table>; - #cooling-cells = <2>; - power-domains = <&CPU_PD3>; - power-domain-names = "psci"; - qcom,acc = <&cpu3_acc>; - qcom,saw = <&cpu3_saw>; - }; - - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - - idle-states { - entry-method = "psci"; - - CPU_SLEEP_0: cpu-sleep-0 { - compatible = "arm,idle-state"; - idle-state-name = "standalone-power-collapse"; - arm,psci-suspend-param = <0x40000002>; - entry-latency-us = <130>; - exit-latency-us = <150>; - min-residency-us = <2000>; - local-timer-stop; - }; - }; - - domain-idle-states { - - CLUSTER_RET: cluster-retention { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x41000012>; - entry-latency-us = <500>; - exit-latency-us = <500>; - min-residency-us = <2000>; - }; - - CLUSTER_PWRDN: cluster-gdhs { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x41000032>; - entry-latency-us = <2000>; - exit-latency-us = <2000>; - min-residency-us = <6000>; - }; - }; - }; - - cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; - opp-shared; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - }; - opp-998400000 { - opp-hz = /bits/ 64 <998400000>; - }; - }; - - firmware { - scm: scm { - compatible = "qcom,scm-msm8916", "qcom,scm"; - clocks = <&gcc GCC_CRYPTO_CLK>, - <&gcc GCC_CRYPTO_AXI_CLK>, - <&gcc GCC_CRYPTO_AHB_CLK>; - clock-names = "core", "bus", "iface"; - #reset-cells = <1>; - - qcom,dload-mode = <&tcsr 0x6100>; - }; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = ; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - - CPU_PD0: power-domain-cpu0 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&CPU_SLEEP_0>; - }; - - CPU_PD1: power-domain-cpu1 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&CPU_SLEEP_0>; - }; - - CPU_PD2: power-domain-cpu2 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&CPU_SLEEP_0>; - }; - - CPU_PD3: power-domain-cpu3 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&CPU_SLEEP_0>; - }; - - CLUSTER_PD: power-domain-cluster { - #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; - }; - }; - - rpm: remoteproc { - compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; - - smd-edge { - interrupts = ; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8916"; - qcom,smd-channels = "rpm_requests"; - - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; - #clock-cells = <1>; - clocks = <&xo_board>; - clock-names = "xo"; - }; - - rpmpd: power-controller { - compatible = "qcom,msm8916-rpmpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmpd_opp_table>; - - rpmpd_opp_table: opp-table { - compatible = "operating-points-v2"; - - rpmpd_opp_ret: opp1 { - opp-level = <1>; - }; - rpmpd_opp_svs_krait: opp2 { - opp-level = <2>; - }; - rpmpd_opp_svs_soc: opp3 { - opp-level = <3>; - }; - rpmpd_opp_nom: opp4 { - opp-level = <4>; - }; - rpmpd_opp_turbo: opp5 { - opp-level = <5>; - }; - rpmpd_opp_super_turbo: opp6 { - opp-level = <6>; - }; - }; - }; - }; - }; - }; - - smp2p-hexagon { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; - - interrupts = ; - - qcom,ipc = <&apcs 8 14>; - - qcom,local-pid = <0>; - qcom,remote-pid = <1>; - - hexagon_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - - #qcom,smem-state-cells = <1>; - }; - - hexagon_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-wcnss { - compatible = "qcom,smp2p"; - qcom,smem = <451>, <431>; - - interrupts = ; - - qcom,ipc = <&apcs 8 18>; - - qcom,local-pid = <0>; - qcom,remote-pid = <4>; - - wcnss_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - - #qcom,smem-state-cells = <1>; - }; - - wcnss_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smsm { - compatible = "qcom,smsm"; - - #address-cells = <1>; - #size-cells = <0>; - - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-3 = <&apcs 8 19>; - - apps_smsm: apps@0 { - reg = <0>; - - #qcom,smem-state-cells = <1>; - }; - - hexagon_smsm: hexagon@1 { - reg = <1>; - interrupts = ; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - wcnss_smsm: wcnss@6 { - reg = <6>; - interrupts = ; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - soc: soc@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - compatible = "simple-bus"; - - rng@22000 { - compatible = "qcom,prng"; - reg = <0x00022000 0x200>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; - clock-names = "core"; - }; - - restart@4ab000 { - compatible = "qcom,pshold"; - reg = <0x004ab000 0x4>; - }; - - qfprom: qfprom@5c000 { - compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; - reg = <0x0005c000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - tsens_base1: base1@d0 { - reg = <0xd0 0x1>; - bits = <0 7>; - }; - - tsens_s0_p1: s0-p1@d0 { - reg = <0xd0 0x2>; - bits = <7 5>; - }; - - tsens_s0_p2: s0-p2@d1 { - reg = <0xd1 0x2>; - bits = <4 5>; - }; - - tsens_s1_p1: s1-p1@d2 { - reg = <0xd2 0x1>; - bits = <1 5>; - }; - tsens_s1_p2: s1-p2@d2 { - reg = <0xd2 0x2>; - bits = <6 5>; - }; - tsens_s2_p1: s2-p1@d3 { - reg = <0xd3 0x1>; - bits = <3 5>; - }; - - tsens_s2_p2: s2-p2@d4 { - reg = <0xd4 0x1>; - bits = <0 5>; - }; - - // no tsens with hw_id 3 - - tsens_s4_p1: s4-p1@d4 { - reg = <0xd4 0x2>; - bits = <5 5>; - }; - - tsens_s4_p2: s4-p2@d5 { - reg = <0xd5 0x1>; - bits = <2 5>; - }; - - tsens_s5_p1: s5-p1@d5 { - reg = <0xd5 0x2>; - bits = <7 5>; - }; - - tsens_s5_p2: s5-p2@d6 { - reg = <0xd6 0x2>; - bits = <4 5>; - }; - - tsens_base2: base2@d7 { - reg = <0xd7 0x1>; - bits = <1 7>; - }; - - tsens_mode: mode@ef { - reg = <0xef 0x1>; - bits = <5 3>; - }; - }; - - rpm_msg_ram: sram@60000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0x00060000 0x8000>; - }; - - sram@290000 { - compatible = "qcom,msm8916-rpm-stats"; - reg = <0x00290000 0x10000>; - }; - - bimc: interconnect@400000 { - compatible = "qcom,msm8916-bimc"; - reg = <0x00400000 0x62000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - - tsens: thermal-sensor@4a9000 { - compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; - reg = <0x004a9000 0x1000>, /* TM */ - <0x004a8000 0x1000>; /* SROT */ - - // no hw_id 3 - nvmem-cells = <&tsens_mode>, - <&tsens_base1>, <&tsens_base2>, - <&tsens_s0_p1>, <&tsens_s0_p2>, - <&tsens_s1_p1>, <&tsens_s1_p2>, - <&tsens_s2_p1>, <&tsens_s2_p2>, - <&tsens_s4_p1>, <&tsens_s4_p2>, - <&tsens_s5_p1>, <&tsens_s5_p2>; - nvmem-cell-names = "mode", - "base1", "base2", - "s0_p1", "s0_p2", - "s1_p1", "s1_p2", - "s2_p1", "s2_p2", - "s4_p1", "s4_p2", - "s5_p1", "s5_p2"; - #qcom,sensors = <5>; - interrupts = ; - interrupt-names = "uplow"; - #thermal-sensor-cells = <1>; - }; - - pcnoc: interconnect@500000 { - compatible = "qcom,msm8916-pcnoc"; - reg = <0x00500000 0x11000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_PCNOC_A_CLK>; - }; - - snoc: interconnect@580000 { - compatible = "qcom,msm8916-snoc"; - reg = <0x00580000 0x14000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; - }; - - stm: stm@802000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0x00802000 0x1000>, - <0x09280000 0x180000>; - reg-names = "stm-base", "stm-stimulus-base"; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - status = "disabled"; - - out-ports { - port { - stm_out: endpoint { - remote-endpoint = <&funnel0_in7>; - }; - }; - }; - }; - - /* System CTIs */ - /* CTI 0 - TMC connections */ - cti0: cti@810000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x00810000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - status = "disabled"; - }; - - /* CTI 1 - TPIU connections */ - cti1: cti@811000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x00811000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - status = "disabled"; - }; - - /* CTIs 2-11 - no information - not instantiated */ - - tpiu: tpiu@820000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0x00820000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - status = "disabled"; - - in-ports { - port { - tpiu_in: endpoint { - remote-endpoint = <&replicator_out1>; - }; - }; - }; - }; - - funnel0: funnel@821000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x00821000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - status = "disabled"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - /* - * Not described input ports: - * 0 - connected to Resource and Power Manger CPU ETM - * 1 - not-connected - * 2 - connected to Modem CPU ETM - * 3 - not-connected - * 5 - not-connected - * 6 - connected trought funnel to Wireless CPU ETM - * 7 - connected to STM component - */ - - port@4 { - reg = <4>; - funnel0_in4: endpoint { - remote-endpoint = <&funnel1_out>; - }; - }; - - port@7 { - reg = <7>; - funnel0_in7: endpoint { - remote-endpoint = <&stm_out>; - }; - }; - }; - - out-ports { - port { - funnel0_out: endpoint { - remote-endpoint = <&etf_in>; - }; - }; - }; - }; - - replicator: replicator@824000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0x00824000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - status = "disabled"; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - replicator_out0: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - port@1 { - reg = <1>; - replicator_out1: endpoint { - remote-endpoint = <&tpiu_in>; - }; - }; - }; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&etf_out>; - }; - }; - }; - }; - - etf: etf@825000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x00825000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - status = "disabled"; - - in-ports { - port { - etf_in: endpoint { - remote-endpoint = <&funnel0_out>; - }; - }; - }; - - out-ports { - port { - etf_out: endpoint { - remote-endpoint = <&replicator_in>; - }; - }; - }; - }; - - etr: etr@826000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x00826000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - status = "disabled"; - - in-ports { - port { - etr_in: endpoint { - remote-endpoint = <&replicator_out0>; - }; - }; - }; - }; - - funnel1: funnel@841000 { /* APSS funnel only 4 inputs are used */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x00841000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - status = "disabled"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - funnel1_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - port@1 { - reg = <1>; - funnel1_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - port@2 { - reg = <2>; - funnel1_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - port@3 { - reg = <3>; - funnel1_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - }; - - out-ports { - port { - funnel1_out: endpoint { - remote-endpoint = <&funnel0_in4>; - }; - }; - }; - }; - - debug0: debug@850000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0x00850000 0x1000>; - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - cpu = <&CPU0>; - status = "disabled"; - }; - - debug1: debug@852000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0x00852000 0x1000>; - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - cpu = <&CPU1>; - status = "disabled"; - }; - - debug2: debug@854000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0x00854000 0x1000>; - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - cpu = <&CPU2>; - status = "disabled"; - }; - - debug3: debug@856000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0x00856000 0x1000>; - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - cpu = <&CPU3>; - status = "disabled"; - }; - - /* Core CTIs; CTIs 12-15 */ - /* CTI - CPU-0 */ - cti12: cti@858000 { - compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", - "arm,primecell"; - reg = <0x00858000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - cpu = <&CPU0>; - arm,cs-dev-assoc = <&etm0>; - - status = "disabled"; - }; - - /* CTI - CPU-1 */ - cti13: cti@859000 { - compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", - "arm,primecell"; - reg = <0x00859000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - cpu = <&CPU1>; - arm,cs-dev-assoc = <&etm1>; - - status = "disabled"; - }; - - /* CTI - CPU-2 */ - cti14: cti@85a000 { - compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", - "arm,primecell"; - reg = <0x0085a000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - cpu = <&CPU2>; - arm,cs-dev-assoc = <&etm2>; - - status = "disabled"; - }; - - /* CTI - CPU-3 */ - cti15: cti@85b000 { - compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", - "arm,primecell"; - reg = <0x0085b000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - cpu = <&CPU3>; - arm,cs-dev-assoc = <&etm3>; - - status = "disabled"; - }; - - etm0: etm@85c000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x0085c000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - arm,coresight-loses-context-with-cpu; - - cpu = <&CPU0>; - - status = "disabled"; - - out-ports { - port { - etm0_out: endpoint { - remote-endpoint = <&funnel1_in0>; - }; - }; - }; - }; - - etm1: etm@85d000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x0085d000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - arm,coresight-loses-context-with-cpu; - - cpu = <&CPU1>; - - status = "disabled"; - - out-ports { - port { - etm1_out: endpoint { - remote-endpoint = <&funnel1_in1>; - }; - }; - }; - }; - - etm2: etm@85e000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x0085e000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - arm,coresight-loses-context-with-cpu; - - cpu = <&CPU2>; - - status = "disabled"; - - out-ports { - port { - etm2_out: endpoint { - remote-endpoint = <&funnel1_in2>; - }; - }; - }; - }; - - etm3: etm@85f000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x0085f000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - arm,coresight-loses-context-with-cpu; - - cpu = <&CPU3>; - - status = "disabled"; - - out-ports { - port { - etm3_out: endpoint { - remote-endpoint = <&funnel1_in3>; - }; - }; - }; - }; - - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8916-pinctrl"; - reg = <0x01000000 0x300000>; - interrupts = ; - gpio-controller; - gpio-ranges = <&tlmm 0 0 122>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp_i2c1_default: blsp-i2c1-default-state { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c1_sleep: blsp-i2c1-sleep-state { - pins = "gpio2", "gpio3"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c2_default: blsp-i2c2-default-state { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c2_sleep: blsp-i2c2-sleep-state { - pins = "gpio6", "gpio7"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c3_default: blsp-i2c3-default-state { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c3_sleep: blsp-i2c3-sleep-state { - pins = "gpio10", "gpio11"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c4_default: blsp-i2c4-default-state { - pins = "gpio14", "gpio15"; - function = "blsp_i2c4"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c4_sleep: blsp-i2c4-sleep-state { - pins = "gpio14", "gpio15"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c5_default: blsp-i2c5-default-state { - pins = "gpio18", "gpio19"; - function = "blsp_i2c5"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c5_sleep: blsp-i2c5-sleep-state { - pins = "gpio18", "gpio19"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c6_default: blsp-i2c6-default-state { - pins = "gpio22", "gpio23"; - function = "blsp_i2c6"; - drive-strength = <2>; - bias-disable; - }; - - blsp_i2c6_sleep: blsp-i2c6-sleep-state { - pins = "gpio22", "gpio23"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp_spi1_default: blsp-spi1-default-state { - spi-pins { - pins = "gpio0", "gpio1", "gpio3"; - function = "blsp_spi1"; - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio2"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi1_sleep: blsp-spi1-sleep-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi2_default: blsp-spi2-default-state { - spi-pins { - pins = "gpio4", "gpio5", "gpio7"; - function = "blsp_spi2"; - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio6"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi2_sleep: blsp-spi2-sleep-state { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi3_default: blsp-spi3-default-state { - spi-pins { - pins = "gpio8", "gpio9", "gpio11"; - function = "blsp_spi3"; - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio10"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi3_sleep: blsp-spi3-sleep-state { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi4_default: blsp-spi4-default-state { - spi-pins { - pins = "gpio12", "gpio13", "gpio15"; - function = "blsp_spi4"; - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio14"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi4_sleep: blsp-spi4-sleep-state { - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi5_default: blsp-spi5-default-state { - spi-pins { - pins = "gpio16", "gpio17", "gpio19"; - function = "blsp_spi5"; - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio18"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi5_sleep: blsp-spi5-sleep-state { - pins = "gpio16", "gpio17", "gpio18", "gpio19"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp_spi6_default: blsp-spi6-default-state { - spi-pins { - pins = "gpio20", "gpio21", "gpio23"; - function = "blsp_spi6"; - drive-strength = <12>; - bias-disable; - }; - cs-pins { - pins = "gpio22"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp_spi6_sleep: blsp-spi6-sleep-state { - pins = "gpio20", "gpio21", "gpio22", "gpio23"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp_uart1_default: blsp-uart1-default-state { - /* TX, RX, CTS_N, RTS_N */ - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "blsp_uart1"; - drive-strength = <16>; - bias-disable; - }; - - blsp_uart1_sleep: blsp-uart1-sleep-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp_uart2_default: blsp-uart2-default-state { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - drive-strength = <16>; - bias-disable; - }; - - blsp_uart2_sleep: blsp-uart2-sleep-state { - pins = "gpio4", "gpio5"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - camera_front_default: camera-front-default-state { - pwdn-pins { - pins = "gpio33"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - rst-pins { - pins = "gpio28"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - mclk1-pins { - pins = "gpio27"; - function = "cam_mclk1"; - drive-strength = <16>; - bias-disable; - }; - }; - - camera_rear_default: camera-rear-default-state { - pwdn-pins { - pins = "gpio34"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - rst-pins { - pins = "gpio35"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - mclk0-pins { - pins = "gpio26"; - function = "cam_mclk0"; - drive-strength = <16>; - bias-disable; - }; - }; - - cci0_default: cci0-default-state { - pins = "gpio29", "gpio30"; - function = "cci_i2c"; - drive-strength = <16>; - bias-disable; - }; - - cdc_dmic_default: cdc-dmic-default-state { - clk-pins { - pins = "gpio0"; - function = "dmic0_clk"; - drive-strength = <8>; - }; - data-pins { - pins = "gpio1"; - function = "dmic0_data"; - drive-strength = <8>; - }; - }; - - cdc_dmic_sleep: cdc-dmic-sleep-state { - clk-pins { - pins = "gpio0"; - function = "dmic0_clk"; - drive-strength = <2>; - bias-disable; - }; - data-pins { - pins = "gpio1"; - function = "dmic0_data"; - drive-strength = <2>; - bias-disable; - }; - }; - - cdc_pdm_default: cdc-pdm-default-state { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - drive-strength = <8>; - bias-disable; - }; - - cdc_pdm_sleep: cdc-pdm-sleep-state { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - function = "cdc_pdm0"; - drive-strength = <2>; - bias-pull-down; - }; - - pri_mi2s_default: mi2s-pri-default-state { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - drive-strength = <8>; - bias-disable; - }; - - pri_mi2s_sleep: mi2s-pri-sleep-state { - pins = "gpio113", "gpio114", "gpio115", "gpio116"; - function = "pri_mi2s"; - drive-strength = <2>; - bias-disable; - }; - - pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { - pins = "gpio116"; - function = "pri_mi2s"; - drive-strength = <8>; - bias-disable; - }; - - pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { - pins = "gpio116"; - function = "pri_mi2s"; - drive-strength = <2>; - bias-disable; - }; - - pri_mi2s_ws_default: mi2s-pri-ws-default-state { - pins = "gpio110"; - function = "pri_mi2s_ws"; - drive-strength = <8>; - bias-disable; - }; - - pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { - pins = "gpio110"; - function = "pri_mi2s_ws"; - drive-strength = <2>; - bias-disable; - }; - - sec_mi2s_default: mi2s-sec-default-state { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - drive-strength = <8>; - bias-disable; - }; - - sec_mi2s_sleep: mi2s-sec-sleep-state { - pins = "gpio112", "gpio117", "gpio118", "gpio119"; - function = "sec_mi2s"; - drive-strength = <2>; - bias-disable; - }; - - sdc1_default: sdc1-default-state { - clk-pins { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; - cmd-pins { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - data-pins { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <10>; - }; - }; - - sdc1_sleep: sdc1-sleep-state { - clk-pins { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; - cmd-pins { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - data-pins { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - }; - - sdc2_default: sdc2-default-state { - clk-pins { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - cmd-pins { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - data-pins { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - }; - - sdc2_sleep: sdc2-sleep-state { - clk-pins { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; - cmd-pins { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - data-pins { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; - }; - - wcss_wlan_default: wcss-wlan-default-state { - pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; - function = "wcss_wlan"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - gcc: clock-controller@1800000 { - compatible = "qcom,gcc-msm8916"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x01800000 0x80000>; - clocks = <&xo_board>, - <&sleep_clk>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi0_phy 0>, - <0>, - <0>, - <0>; - clock-names = "xo", - "sleep_clk", - "dsi0pll", - "dsi0pllbyte", - "ext_mclk", - "ext_pri_i2s", - "ext_sec_i2s"; - }; - - tcsr_mutex: hwlock@1905000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x01905000 0x20000>; - #hwlock-cells = <1>; - }; - - tcsr: syscon@1937000 { - compatible = "qcom,tcsr-msm8916", "syscon"; - reg = <0x01937000 0x30000>; - }; - - mdss: display-subsystem@1a00000 { - status = "disabled"; - compatible = "qcom,mdss"; - reg = <0x01a00000 0x1000>, - <0x01ac8000 0x3000>; - reg-names = "mdss_phys", "vbif_phys"; - - power-domains = <&gcc MDSS_GDSC>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync"; - - interrupts = ; - - interrupt-controller; - #interrupt-cells = <1>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mdss_mdp: display-controller@1a01000 { - compatible = "qcom,msm8916-mdp5", "qcom,mdp5"; - reg = <0x01a01000 0x89000>; - reg-names = "mdp_phys"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; - - iommus = <&apps_iommu 4>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdss_mdp_intf1_out: endpoint { - remote-endpoint = <&mdss_dsi0_in>; - }; - }; - }; - }; - - mdss_dsi0: dsi@1a98000 { - compatible = "qcom,msm8916-dsi-ctrl", - "qcom,mdss-dsi-ctrl"; - reg = <0x01a98000 0x25c>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <4>; - - assigned-clocks = <&gcc BYTE0_CLK_SRC>, - <&gcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; - - clocks = <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_BYTE0_CLK>, - <&gcc GCC_MDSS_PCLK0_CLK>, - <&gcc GCC_MDSS_ESC0_CLK>; - clock-names = "mdp_core", - "iface", - "bus", - "byte", - "pixel", - "core"; - phys = <&mdss_dsi0_phy>; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdss_dsi0_in: endpoint { - remote-endpoint = <&mdss_mdp_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - mdss_dsi0_out: endpoint { - }; - }; - }; - }; - - mdss_dsi0_phy: phy@1a98300 { - compatible = "qcom,dsi-phy-28nm-lp"; - reg = <0x01a98300 0xd4>, - <0x01a98500 0x280>, - <0x01a98780 0x30>; - reg-names = "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; - - #clock-cells = <1>; - #phy-cells = <0>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "ref"; - }; - }; - - camss: camss@1b0ac00 { - compatible = "qcom,msm8916-camss"; - reg = <0x01b0ac00 0x200>, - <0x01b00030 0x4>, - <0x01b0b000 0x200>, - <0x01b00038 0x4>, - <0x01b08000 0x100>, - <0x01b08400 0x100>, - <0x01b0a000 0x500>, - <0x01b00020 0x10>, - <0x01b10000 0x1000>; - reg-names = "csiphy0", - "csiphy0_clk_mux", - "csiphy1", - "csiphy1_clk_mux", - "csid0", - "csid1", - "ispif", - "csi_clk_mux", - "vfe0"; - interrupts = , - , - , - , - , - ; - interrupt-names = "csiphy0", - "csiphy1", - "csid0", - "csid1", - "ispif", - "vfe0"; - power-domains = <&gcc VFE_GDSC>; - clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, - <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, - <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, - <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, - <&gcc GCC_CAMSS_CSI0_AHB_CLK>, - <&gcc GCC_CAMSS_CSI0_CLK>, - <&gcc GCC_CAMSS_CSI0PHY_CLK>, - <&gcc GCC_CAMSS_CSI0PIX_CLK>, - <&gcc GCC_CAMSS_CSI0RDI_CLK>, - <&gcc GCC_CAMSS_CSI1_AHB_CLK>, - <&gcc GCC_CAMSS_CSI1_CLK>, - <&gcc GCC_CAMSS_CSI1PHY_CLK>, - <&gcc GCC_CAMSS_CSI1PIX_CLK>, - <&gcc GCC_CAMSS_CSI1RDI_CLK>, - <&gcc GCC_CAMSS_AHB_CLK>, - <&gcc GCC_CAMSS_VFE0_CLK>, - <&gcc GCC_CAMSS_CSI_VFE0_CLK>, - <&gcc GCC_CAMSS_VFE_AHB_CLK>, - <&gcc GCC_CAMSS_VFE_AXI_CLK>; - clock-names = "top_ahb", - "ispif_ahb", - "csiphy0_timer", - "csiphy1_timer", - "csi0_ahb", - "csi0", - "csi0_phy", - "csi0_pix", - "csi0_rdi", - "csi1_ahb", - "csi1", - "csi1_phy", - "csi1_pix", - "csi1_rdi", - "ahb", - "vfe0", - "csi_vfe0", - "vfe_ahb", - "vfe_axi"; - iommus = <&apps_iommu 3>; - status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - }; - }; - }; - - cci: cci@1b0c000 { - compatible = "qcom,msm8916-cci", "qcom,msm8226-cci"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x01b0c000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, - <&gcc GCC_CAMSS_CCI_AHB_CLK>, - <&gcc GCC_CAMSS_CCI_CLK>, - <&gcc GCC_CAMSS_AHB_CLK>; - clock-names = "camss_top_ahb", "cci_ahb", - "cci", "camss_ahb"; - assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>, - <&gcc GCC_CAMSS_CCI_CLK>; - assigned-clock-rates = <80000000>, <19200000>; - pinctrl-names = "default"; - pinctrl-0 = <&cci0_default>; - status = "disabled"; - - cci_i2c0: i2c-bus@0 { - reg = <0>; - clock-frequency = <400000>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - gpu: gpu@1c00000 { - compatible = "qcom,adreno-306.0", "qcom,adreno"; - reg = <0x01c00000 0x20000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = ; - interrupt-names = "kgsl_3d0_irq"; - clock-names = - "core", - "iface", - "mem", - "mem_iface", - "alt_mem_iface", - "gfx3d"; - clocks = - <&gcc GCC_OXILI_GFX3D_CLK>, - <&gcc GCC_OXILI_AHB_CLK>, - <&gcc GCC_OXILI_GMEM_CLK>, - <&gcc GCC_BIMC_GFX_CLK>, - <&gcc GCC_BIMC_GPU_CLK>, - <&gcc GFX3D_CLK_SRC>; - power-domains = <&gcc OXILI_GDSC>; - operating-points-v2 = <&gpu_opp_table>; - iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; - status = "disabled"; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - }; - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - }; - }; - }; - - venus: video-codec@1d00000 { - compatible = "qcom,msm8916-venus"; - reg = <0x01d00000 0xff000>; - interrupts = ; - power-domains = <&gcc VENUS_GDSC>; - clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, - <&gcc GCC_VENUS0_AHB_CLK>, - <&gcc GCC_VENUS0_AXI_CLK>; - clock-names = "core", "iface", "bus"; - iommus = <&apps_iommu 5>; - memory-region = <&venus_mem>; - status = "disabled"; - - video-decoder { - compatible = "venus-decoder"; - }; - - video-encoder { - compatible = "venus-encoder"; - }; - }; - - apps_iommu: iommu@1ef0000 { - #address-cells = <1>; - #size-cells = <1>; - #iommu-cells = <1>; - compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; - ranges = <0 0x01e20000 0x20000>; - reg = <0x01ef0000 0x3000>; - clocks = <&gcc GCC_SMMU_CFG_CLK>, - <&gcc GCC_APSS_TCU_CLK>; - clock-names = "iface", "bus"; - qcom,iommu-secure-id = <17>; - - /* VFE */ - iommu-ctx@3000 { - compatible = "qcom,msm-iommu-v1-sec"; - reg = <0x3000 0x1000>; - interrupts = ; - }; - - /* MDP_0 */ - iommu-ctx@4000 { - compatible = "qcom,msm-iommu-v1-ns"; - reg = <0x4000 0x1000>; - interrupts = ; - }; - - /* VENUS_NS */ - iommu-ctx@5000 { - compatible = "qcom,msm-iommu-v1-sec"; - reg = <0x5000 0x1000>; - interrupts = ; - }; - }; - - gpu_iommu: iommu@1f08000 { - #address-cells = <1>; - #size-cells = <1>; - #iommu-cells = <1>; - compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; - ranges = <0 0x01f08000 0x10000>; - clocks = <&gcc GCC_SMMU_CFG_CLK>, - <&gcc GCC_GFX_TCU_CLK>; - clock-names = "iface", "bus"; - qcom,iommu-secure-id = <18>; - - /* GFX3D_USER */ - iommu-ctx@1000 { - compatible = "qcom,msm-iommu-v1-ns"; - reg = <0x1000 0x1000>; - interrupts = ; - }; - - /* GFX3D_PRIV */ - iommu-ctx@2000 { - compatible = "qcom,msm-iommu-v1-ns"; - reg = <0x2000 0x1000>; - interrupts = ; - }; - }; - - spmi_bus: spmi@200f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0200f000 0x001000>, - <0x02400000 0x400000>, - <0x02c00000 0x400000>, - <0x03800000 0x200000>, - <0x0200a000 0x002100>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = ; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - bam_dmux_dma: dma-controller@4044000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x04044000 0x19000>; - interrupts = ; - #dma-cells = <1>; - qcom,ee = <0>; - - num-channels = <6>; - qcom,num-ees = <1>; - qcom,powered-remotely; - - status = "disabled"; - }; - - mpss: remoteproc@4080000 { - compatible = "qcom,msm8916-mss-pil"; - reg = <0x04080000 0x100>, - <0x04020000 0x040>; - - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, - <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - power-domains = <&rpmpd MSM8916_VDDCX>, - <&rpmpd MSM8916_VDDMX>; - power-domain-names = "cx", "mx"; - - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "bus", "mem", "xo"; - - qcom,smem-states = <&hexagon_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - resets = <&scm 0>; - reset-names = "mss_restart"; - - qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; - - status = "disabled"; - - mba { - memory-region = <&mba_mem>; - }; - - mpss { - memory-region = <&mpss_mem>; - }; - - bam_dmux: bam-dmux { - compatible = "qcom,bam-dmux"; - - interrupt-parent = <&hexagon_smsm>; - interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "pc", "pc-ack"; - - qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; - qcom,smem-state-names = "pc", "pc-ack"; - - dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; - dma-names = "tx", "rx"; - - status = "disabled"; - }; - - smd-edge { - interrupts = ; - - qcom,smd-edge = <0>; - qcom,ipc = <&apcs 8 12>; - qcom,remote-pid = <1>; - - label = "hexagon"; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,smd-channels = "fastrpcsmd-apps-dsp"; - label = "adsp"; - qcom,non-secure-domain; - - #address-cells = <1>; - #size-cells = <0>; - - cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - }; - }; - }; - }; - - sound: sound@7702000 { - status = "disabled"; - compatible = "qcom,apq8016-sbc-sndcard"; - reg = <0x07702000 0x4>, <0x07702004 0x4>; - reg-names = "mic-iomux", "spkr-iomux"; - }; - - lpass: audio-controller@7708000 { - status = "disabled"; - compatible = "qcom,apq8016-lpass-cpu"; - - /* - * Note: Unlike the name would suggest, the SEC_I2S_CLK - * is actually only used by Tertiary MI2S while - * Primary/Secondary MI2S both use the PRI_I2S_CLK. - */ - clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, - <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; - - clock-names = "ahbix-clk", - "mi2s-bit-clk0", - "mi2s-bit-clk1", - "mi2s-bit-clk2", - "mi2s-bit-clk3", - "pcnoc-mport-clk", - "pcnoc-sway-clk"; - #sound-dai-cells = <1>; - - interrupts = ; - interrupt-names = "lpass-irq-lpaif"; - reg = <0x07708000 0x10000>; - reg-names = "lpass-lpaif"; - - #address-cells = <1>; - #size-cells = <0>; - }; - - lpass_codec: audio-codec@771c000 { - compatible = "qcom,msm8916-wcd-digital-codec"; - reg = <0x0771c000 0x400>; - clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, - <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "ahbix-clk", "mclk"; - #sound-dai-cells = <1>; - status = "disabled"; - }; - - sdhc_1: mmc@7824900 { - compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x07824900 0x11c>, <0x07824000 0x800>; - reg-names = "hc", "core"; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; - clock-names = "iface", "core", "xo"; - pinctrl-0 = <&sdc1_default>; - pinctrl-1 = <&sdc1_sleep>; - pinctrl-names = "default", "sleep"; - mmc-ddr-1_8v; - bus-width = <8>; - non-removable; - status = "disabled"; - }; - - sdhc_2: mmc@7864900 { - compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x07864900 0x11c>, <0x07864000 0x800>; - reg-names = "hc", "core"; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; - clock-names = "iface", "core", "xo"; - pinctrl-0 = <&sdc2_default>; - pinctrl-1 = <&sdc2_sleep>; - pinctrl-names = "default", "sleep"; - bus-width = <4>; - status = "disabled"; - }; - - blsp_dma: dma-controller@7884000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07884000 0x23000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - blsp_uart1: serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x078af000 0x200>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 0>, <&blsp_dma 1>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_uart1_default>; - pinctrl-1 = <&blsp_uart1_sleep>; - status = "disabled"; - }; - - blsp_uart2: serial@78b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x078b0000 0x200>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 2>, <&blsp_dma 3>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_uart2_default>; - pinctrl-1 = <&blsp_uart2_sleep>; - status = "disabled"; - }; - - blsp_i2c1: i2c@78b5000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b5000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 4>, <&blsp_dma 5>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_i2c1_default>; - pinctrl-1 = <&blsp_i2c1_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi1: spi@78b5000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b5000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 4>, <&blsp_dma 5>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_spi1_default>; - pinctrl-1 = <&blsp_spi1_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c2: i2c@78b6000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b6000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 6>, <&blsp_dma 7>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_i2c2_default>; - pinctrl-1 = <&blsp_i2c2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi2: spi@78b6000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b6000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 6>, <&blsp_dma 7>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_spi2_default>; - pinctrl-1 = <&blsp_spi2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c3: i2c@78b7000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b7000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 8>, <&blsp_dma 9>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_i2c3_default>; - pinctrl-1 = <&blsp_i2c3_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi3: spi@78b7000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b7000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 8>, <&blsp_dma 9>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_spi3_default>; - pinctrl-1 = <&blsp_spi3_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c4: i2c@78b8000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b8000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 10>, <&blsp_dma 11>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_i2c4_default>; - pinctrl-1 = <&blsp_i2c4_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi4: spi@78b8000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b8000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 10>, <&blsp_dma 11>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_spi4_default>; - pinctrl-1 = <&blsp_spi4_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c5: i2c@78b9000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b9000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 12>, <&blsp_dma 13>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_i2c5_default>; - pinctrl-1 = <&blsp_i2c5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi5: spi@78b9000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b9000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 12>, <&blsp_dma 13>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_spi5_default>; - pinctrl-1 = <&blsp_spi5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_i2c6: i2c@78ba000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078ba000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 14>, <&blsp_dma 15>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_i2c6_default>; - pinctrl-1 = <&blsp_i2c6_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp_spi6: spi@78ba000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078ba000 0x500>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp_dma 14>, <&blsp_dma 15>; - dma-names = "tx", "rx"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp_spi6_default>; - pinctrl-1 = <&blsp_spi6_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - usb: usb@78d9000 { - compatible = "qcom,ci-hdrc"; - reg = <0x078d9000 0x200>, - <0x078d9200 0x200>; - interrupts = , - ; - clocks = <&gcc GCC_USB_HS_AHB_CLK>, - <&gcc GCC_USB_HS_SYSTEM_CLK>; - clock-names = "iface", "core"; - assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; - assigned-clock-rates = <80000000>; - resets = <&gcc GCC_USB_HS_BCR>; - reset-names = "core"; - phy_type = "ulpi"; - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - ahb-burst-config = <0>; - phy-names = "usb-phy"; - phys = <&usb_hs_phy>; - status = "disabled"; - #reset-cells = <1>; - - ulpi { - usb_hs_phy: phy { - compatible = "qcom,usb-hs-phy-msm8916", - "qcom,usb-hs-phy"; - #phy-cells = <0>; - clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; - clock-names = "ref", "sleep"; - resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; - reset-names = "phy", "por"; - qcom,init-seq = /bits/ 8 <0x0 0x44>, - <0x1 0x6b>, - <0x2 0x24>, - <0x3 0x13>; - }; - }; - }; - - wcnss: remoteproc@a204000 { - compatible = "qcom,pronto-v2-pil", "qcom,pronto"; - reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; - reg-names = "ccu", "dxe", "pmu"; - - memory-region = <&wcnss_mem>; - - interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - power-domains = <&rpmpd MSM8916_VDDCX>, - <&rpmpd MSM8916_VDDMX>; - power-domain-names = "cx", "mx"; - - qcom,smem-states = <&wcnss_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - pinctrl-names = "default"; - pinctrl-0 = <&wcss_wlan_default>; - - status = "disabled"; - - wcnss_iris: iris { - /* Separate chip, compatible is board-specific */ - clocks = <&rpmcc RPM_SMD_RF_CLK2>; - clock-names = "xo"; - }; - - smd-edge { - interrupts = ; - - qcom,ipc = <&apcs 8 17>; - qcom,smd-edge = <6>; - qcom,remote-pid = <4>; - - label = "pronto"; - - wcnss_ctrl: wcnss { - compatible = "qcom,wcnss"; - qcom,smd-channels = "WCNSS_CTRL"; - - qcom,mmio = <&wcnss>; - - wcnss_bt: bluetooth { - compatible = "qcom,wcnss-bt"; - }; - - wcnss_wifi: wifi { - compatible = "qcom,wcnss-wlan"; - - interrupts = , - ; - interrupt-names = "tx", "rx"; - - qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; - }; - }; - }; - }; - - intc: interrupt-controller@b000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, - <0x0b001000 0x1000>, <0x0b004000 0x2000>; - interrupts = ; - }; - - apcs: mailbox@b011000 { - compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; - reg = <0x0b011000 0x1000>; - #mbox-cells = <1>; - clocks = <&a53pll>, <&gcc GPLL0_VOTE>; - clock-names = "pll", "aux"; - #clock-cells = <0>; - }; - - a53pll: clock@b016000 { - compatible = "qcom,msm8916-a53pll"; - reg = <0x0b016000 0x40>; - #clock-cells = <0>; - clocks = <&xo_board>; - clock-names = "xo"; - }; - - timer@b020000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0x0b020000 0x1000>; - clock-frequency = <19200000>; - - frame@b021000 { - frame-number = <0>; - interrupts = , - ; - reg = <0x0b021000 0x1000>, - <0x0b022000 0x1000>; - }; - - frame@b023000 { - frame-number = <1>; - interrupts = ; - reg = <0x0b023000 0x1000>; - status = "disabled"; - }; - - frame@b024000 { - frame-number = <2>; - interrupts = ; - reg = <0x0b024000 0x1000>; - status = "disabled"; - }; - - frame@b025000 { - frame-number = <3>; - interrupts = ; - reg = <0x0b025000 0x1000>; - status = "disabled"; - }; - - frame@b026000 { - frame-number = <4>; - interrupts = ; - reg = <0x0b026000 0x1000>; - status = "disabled"; - }; - - frame@b027000 { - frame-number = <5>; - interrupts = ; - reg = <0x0b027000 0x1000>; - status = "disabled"; - }; - - frame@b028000 { - frame-number = <6>; - interrupts = ; - reg = <0x0b028000 0x1000>; - status = "disabled"; - }; - }; - - cpu0_acc: power-manager@b088000 { - compatible = "qcom,msm8916-acc"; - reg = <0x0b088000 0x1000>; - status = "reserved"; /* Controlled by PSCI firmware */ - }; - - cpu0_saw: power-manager@b089000 { - compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; - reg = <0x0b089000 0x1000>; - status = "reserved"; /* Controlled by PSCI firmware */ - }; - - cpu1_acc: power-manager@b098000 { - compatible = "qcom,msm8916-acc"; - reg = <0x0b098000 0x1000>; - status = "reserved"; /* Controlled by PSCI firmware */ - }; - - cpu1_saw: power-manager@b099000 { - compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; - reg = <0x0b099000 0x1000>; - status = "reserved"; /* Controlled by PSCI firmware */ - }; - - cpu2_acc: power-manager@b0a8000 { - compatible = "qcom,msm8916-acc"; - reg = <0x0b0a8000 0x1000>; - status = "reserved"; /* Controlled by PSCI firmware */ - }; - - cpu2_saw: power-manager@b0a9000 { - compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; - reg = <0x0b0a9000 0x1000>; - status = "reserved"; /* Controlled by PSCI firmware */ - }; - - cpu3_acc: power-manager@b0b8000 { - compatible = "qcom,msm8916-acc"; - reg = <0x0b0b8000 0x1000>; - status = "reserved"; /* Controlled by PSCI firmware */ - }; - - cpu3_saw: power-manager@b0b9000 { - compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2"; - reg = <0x0b0b9000 0x1000>; - status = "reserved"; /* Controlled by PSCI firmware */ - }; - }; - - thermal-zones { - cpu0-1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; - - trips { - cpu0_1_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu0_1_crit: cpu-crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu0_1_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu2-3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; - - trips { - cpu2_3_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu2_3_crit: cpu-crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu2_3_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - gpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 2>; - - trips { - gpu_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - gpu_crit: gpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - camera-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 1>; - - trips { - cam_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - modem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 0>; - - trips { - modem_alert0: trip-point0 { - temperature = <85000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; -}; diff --git a/arch/arm/dts/msm8996.dtsi b/arch/arm/dts/msm8996.dtsi deleted file mode 100644 index 6ba9da9e6a8b..000000000000 --- a/arch/arm/dts/msm8996.dtsi +++ /dev/null @@ -1,3884 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - clock-output-names = "xo_board"; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32764>; - clock-output-names = "sleep_clk"; - }; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x0>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - capacity-dmips-mhz = <1024>; - clocks = <&kryocc 0>; - interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; - operating-points-v2 = <&cluster0_opp>; - #cooling-cells = <2>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x1>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - capacity-dmips-mhz = <1024>; - clocks = <&kryocc 0>; - interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; - operating-points-v2 = <&cluster0_opp>; - #cooling-cells = <2>; - next-level-cache = <&L2_0>; - }; - - CPU2: cpu@100 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x100>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - capacity-dmips-mhz = <1024>; - clocks = <&kryocc 1>; - interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; - operating-points-v2 = <&cluster1_opp>; - #cooling-cells = <2>; - next-level-cache = <&L2_1>; - L2_1: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - CPU3: cpu@101 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x101>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - capacity-dmips-mhz = <1024>; - clocks = <&kryocc 1>; - interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>; - operating-points-v2 = <&cluster1_opp>; - #cooling-cells = <2>; - next-level-cache = <&L2_1>; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - - core1 { - cpu = <&CPU1>; - }; - }; - - cluster1 { - core0 { - cpu = <&CPU2>; - }; - - core1 { - cpu = <&CPU3>; - }; - }; - }; - - idle-states { - entry-method = "psci"; - - CPU_SLEEP_0: cpu-sleep-0 { - compatible = "arm,idle-state"; - idle-state-name = "standalone-power-collapse"; - arm,psci-suspend-param = <0x00000004>; - entry-latency-us = <130>; - exit-latency-us = <80>; - min-residency-us = <300>; - }; - }; - }; - - cluster0_opp: opp-table-cluster0 { - compatible = "operating-points-v2-kryo-cpu"; - nvmem-cells = <&speedbin_efuse>; - opp-shared; - - /* Nominal fmax for now */ - opp-307200000 { - opp-hz = /bits/ 64 <307200000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-422400000 { - opp-hz = /bits/ 64 <422400000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-480000000 { - opp-hz = /bits/ 64 <480000000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-556800000 { - opp-hz = /bits/ 64 <556800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-652800000 { - opp-hz = /bits/ 64 <652800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <384000>; - }; - opp-729600000 { - opp-hz = /bits/ 64 <729600000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <460800>; - }; - opp-844800000 { - opp-hz = /bits/ 64 <844800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <537600>; - }; - opp-960000000 { - opp-hz = /bits/ 64 <960000000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <672000>; - }; - opp-1036800000 { - opp-hz = /bits/ 64 <1036800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <672000>; - }; - opp-1113600000 { - opp-hz = /bits/ 64 <1113600000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <825600>; - }; - opp-1190400000 { - opp-hz = /bits/ 64 <1190400000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <825600>; - }; - opp-1228800000 { - opp-hz = /bits/ 64 <1228800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <902400>; - }; - opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - opp-supported-hw = <0xd>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1056000>; - }; - opp-1363200000 { - opp-hz = /bits/ 64 <1363200000>; - opp-supported-hw = <0x2>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1132800>; - }; - opp-1401600000 { - opp-hz = /bits/ 64 <1401600000>; - opp-supported-hw = <0xd>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1132800>; - }; - opp-1478400000 { - opp-hz = /bits/ 64 <1478400000>; - opp-supported-hw = <0x9>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1190400>; - }; - opp-1497600000 { - opp-hz = /bits/ 64 <1497600000>; - opp-supported-hw = <0x04>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1305600>; - }; - opp-1593600000 { - opp-hz = /bits/ 64 <1593600000>; - opp-supported-hw = <0x9>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1382400>; - }; - }; - - cluster1_opp: opp-table-cluster1 { - compatible = "operating-points-v2-kryo-cpu"; - nvmem-cells = <&speedbin_efuse>; - opp-shared; - - /* Nominal fmax for now */ - opp-307200000 { - opp-hz = /bits/ 64 <307200000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-403200000 { - opp-hz = /bits/ 64 <403200000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-480000000 { - opp-hz = /bits/ 64 <480000000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-556800000 { - opp-hz = /bits/ 64 <556800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-652800000 { - opp-hz = /bits/ 64 <652800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-729600000 { - opp-hz = /bits/ 64 <729600000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <307200>; - }; - opp-806400000 { - opp-hz = /bits/ 64 <806400000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <384000>; - }; - opp-883200000 { - opp-hz = /bits/ 64 <883200000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <460800>; - }; - opp-940800000 { - opp-hz = /bits/ 64 <940800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <537600>; - }; - opp-1036800000 { - opp-hz = /bits/ 64 <1036800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <595200>; - }; - opp-1113600000 { - opp-hz = /bits/ 64 <1113600000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <672000>; - }; - opp-1190400000 { - opp-hz = /bits/ 64 <1190400000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <672000>; - }; - opp-1248000000 { - opp-hz = /bits/ 64 <1248000000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <748800>; - }; - opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <825600>; - }; - opp-1401600000 { - opp-hz = /bits/ 64 <1401600000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <902400>; - }; - opp-1478400000 { - opp-hz = /bits/ 64 <1478400000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <979200>; - }; - opp-1555200000 { - opp-hz = /bits/ 64 <1555200000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1056000>; - }; - opp-1632000000 { - opp-hz = /bits/ 64 <1632000000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1190400>; - }; - opp-1708800000 { - opp-hz = /bits/ 64 <1708800000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1228800>; - }; - opp-1785600000 { - opp-hz = /bits/ 64 <1785600000>; - opp-supported-hw = <0xf>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1305600>; - }; - opp-1804800000 { - opp-hz = /bits/ 64 <1804800000>; - opp-supported-hw = <0xe>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1305600>; - }; - opp-1824000000 { - opp-hz = /bits/ 64 <1824000000>; - opp-supported-hw = <0x1>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1382400>; - }; - opp-1900800000 { - opp-hz = /bits/ 64 <1900800000>; - opp-supported-hw = <0x4>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1305600>; - }; - opp-1920000000 { - opp-hz = /bits/ 64 <1920000000>; - opp-supported-hw = <0x1>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1459200>; - }; - opp-1996800000 { - opp-hz = /bits/ 64 <1996800000>; - opp-supported-hw = <0x1>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1593600>; - }; - opp-2073600000 { - opp-hz = /bits/ 64 <2073600000>; - opp-supported-hw = <0x1>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1593600>; - }; - opp-2150400000 { - opp-hz = /bits/ 64 <2150400000>; - opp-supported-hw = <0x1>; - clock-latency-ns = <200000>; - opp-peak-kBps = <1593600>; - }; - }; - - firmware { - scm { - compatible = "qcom,scm-msm8996", "qcom,scm"; - qcom,dload-mode = <&tcsr_2 0x13000>; - }; - }; - - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the reg */ - reg = <0x0 0x80000000 0x0 0x0>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - rpm: remoteproc { - compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc"; - - glink-edge { - compatible = "qcom,glink-rpm"; - interrupts = ; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - mboxes = <&apcs_glb 0>; - - rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8996"; - qcom,glink-channels = "rpm_requests"; - - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; - #clock-cells = <1>; - clocks = <&xo_board>; - clock-names = "xo"; - }; - - rpmpd: power-controller { - compatible = "qcom,msm8996-rpmpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmpd_opp_table>; - - rpmpd_opp_table: opp-table { - compatible = "operating-points-v2"; - - rpmpd_opp1: opp1 { - opp-level = <1>; - }; - - rpmpd_opp2: opp2 { - opp-level = <2>; - }; - - rpmpd_opp3: opp3 { - opp-level = <3>; - }; - - rpmpd_opp4: opp4 { - opp-level = <4>; - }; - - rpmpd_opp5: opp5 { - opp-level = <5>; - }; - - rpmpd_opp6: opp6 { - opp-level = <6>; - }; - }; - }; - }; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hyp_mem: memory@85800000 { - reg = <0x0 0x85800000 0x0 0x600000>; - no-map; - }; - - xbl_mem: memory@85e00000 { - reg = <0x0 0x85e00000 0x0 0x200000>; - no-map; - }; - - smem_mem: smem-mem@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; - no-map; - }; - - tz_mem: memory@86200000 { - reg = <0x0 0x86200000 0x0 0x2600000>; - no-map; - }; - - rmtfs_mem: rmtfs { - compatible = "qcom,rmtfs-mem"; - - size = <0x0 0x200000>; - alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = ; - }; - - mpss_mem: mpss@88800000 { - reg = <0x0 0x88800000 0x0 0x6200000>; - no-map; - }; - - adsp_mem: adsp@8ea00000 { - reg = <0x0 0x8ea00000 0x0 0x1b00000>; - no-map; - }; - - slpi_mem: slpi@90500000 { - reg = <0x0 0x90500000 0x0 0xa00000>; - no-map; - }; - - gpu_mem: gpu@90f00000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x90f00000 0x0 0x100000>; - no-map; - }; - - venus_mem: venus@91000000 { - reg = <0x0 0x91000000 0x0 0x500000>; - no-map; - }; - - mba_mem: mba@91500000 { - reg = <0x0 0x91500000 0x0 0x200000>; - no-map; - }; - - mdata_mem: mpss-metadata { - alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>; - size = <0x0 0x4000>; - no-map; - }; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - - smp2p-adsp { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; - - interrupts = ; - - mboxes = <&apcs_glb 10>; - - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-mpss { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; - - interrupts = ; - - mboxes = <&apcs_glb 14>; - - qcom,local-pid = <0>; - qcom,remote-pid = <1>; - - mpss_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - mpss_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-slpi { - compatible = "qcom,smp2p"; - qcom,smem = <481>, <430>; - - interrupts = ; - - mboxes = <&apcs_glb 26>; - - qcom,local-pid = <0>; - qcom,remote-pid = <3>; - - slpi_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - slpi_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - soc: soc@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - compatible = "simple-bus"; - - pcie_phy: phy-wrapper@34000 { - compatible = "qcom,msm8996-qmp-pcie-phy"; - reg = <0x00034000 0x488>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x00034000 0x4000>; - - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - resets = <&gcc GCC_PCIE_PHY_BCR>, - <&gcc GCC_PCIE_PHY_COM_BCR>, - <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; - reset-names = "phy", "common", "cfg"; - - status = "disabled"; - - pciephy_0: phy@1000 { - reg = <0x1000 0x130>, - <0x1200 0x200>, - <0x1400 0x1dc>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "lane0"; - - #clock-cells = <0>; - clock-output-names = "pcie_0_pipe_clk_src"; - - #phy-cells = <0>; - }; - - pciephy_1: phy@2000 { - reg = <0x2000 0x130>, - <0x2200 0x200>, - <0x2400 0x1dc>; - - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe1"; - resets = <&gcc GCC_PCIE_1_PHY_BCR>; - reset-names = "lane1"; - - #clock-cells = <0>; - clock-output-names = "pcie_1_pipe_clk_src"; - - #phy-cells = <0>; - }; - - pciephy_2: phy@3000 { - reg = <0x3000 0x130>, - <0x3200 0x200>, - <0x3400 0x1dc>; - - clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; - clock-names = "pipe2"; - resets = <&gcc GCC_PCIE_2_PHY_BCR>; - reset-names = "lane2"; - - #clock-cells = <0>; - clock-output-names = "pcie_2_pipe_clk_src"; - - #phy-cells = <0>; - }; - }; - - rpm_msg_ram: sram@68000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0x00068000 0x6000>; - }; - - qfprom@74000 { - compatible = "qcom,msm8996-qfprom", "qcom,qfprom"; - reg = <0x00074000 0x8ff>; - #address-cells = <1>; - #size-cells = <1>; - - qusb2p_hstx_trim: hstx_trim@24e { - reg = <0x24e 0x2>; - bits = <5 4>; - }; - - qusb2s_hstx_trim: hstx_trim@24f { - reg = <0x24f 0x1>; - bits = <1 4>; - }; - - speedbin_efuse: speedbin@133 { - reg = <0x133 0x1>; - bits = <5 3>; - }; - }; - - rng: rng@83000 { - compatible = "qcom,prng-ee"; - reg = <0x00083000 0x1000>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; - clock-names = "core"; - }; - - gcc: clock-controller@300000 { - compatible = "qcom,gcc-msm8996"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x00300000 0x90000>; - - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, - <&rpmcc RPM_SMD_LN_BB_CLK>, - <&sleep_clk>, - <&pciephy_0>, - <&pciephy_1>, - <&pciephy_2>, - <&ssusb_phy_0>, - <&ufsphy_lane 0>, - <&ufsphy_lane 1>, - <&ufsphy_lane 2>; - clock-names = "cxo", - "cxo2", - "sleep_clk", - "pcie_0_pipe_clk_src", - "pcie_1_pipe_clk_src", - "pcie_2_pipe_clk_src", - "usb3_phy_pipe_clk_src", - "ufs_rx_symbol_0_clk_src", - "ufs_rx_symbol_1_clk_src", - "ufs_tx_symbol_0_clk_src"; - }; - - bimc: interconnect@408000 { - compatible = "qcom,msm8996-bimc"; - reg = <0x00408000 0x5a000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - - tsens0: thermal-sensor@4a9000 { - compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; - reg = <0x004a9000 0x1000>, /* TM */ - <0x004a8000 0x1000>; /* SROT */ - #qcom,sensors = <13>; - interrupts = , - ; - interrupt-names = "uplow", "critical"; - #thermal-sensor-cells = <1>; - }; - - tsens1: thermal-sensor@4ad000 { - compatible = "qcom,msm8996-tsens", "qcom,tsens-v2"; - reg = <0x004ad000 0x1000>, /* TM */ - <0x004ac000 0x1000>; /* SROT */ - #qcom,sensors = <8>; - interrupts = , - ; - interrupt-names = "uplow", "critical"; - #thermal-sensor-cells = <1>; - }; - - cryptobam: dma-controller@644000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x00644000 0x24000>; - interrupts = ; - clocks = <&gcc GCC_CE1_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - qcom,controlled-remotely; - }; - - crypto: crypto@67a000 { - compatible = "qcom,crypto-v5.4"; - reg = <0x0067a000 0x6000>; - clocks = <&gcc GCC_CE1_AHB_CLK>, - <&gcc GCC_CE1_AXI_CLK>, - <&gcc GCC_CE1_CLK>; - clock-names = "iface", "bus", "core"; - dmas = <&cryptobam 6>, <&cryptobam 7>; - dma-names = "rx", "tx"; - }; - - cnoc: interconnect@500000 { - compatible = "qcom,msm8996-cnoc"; - reg = <0x00500000 0x1000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_CNOC_CLK>, - <&rpmcc RPM_SMD_CNOC_A_CLK>; - }; - - snoc: interconnect@524000 { - compatible = "qcom,msm8996-snoc"; - reg = <0x00524000 0x1c000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; - }; - - a0noc: interconnect@543000 { - compatible = "qcom,msm8996-a0noc"; - reg = <0x00543000 0x6000>; - #interconnect-cells = <1>; - clock-names = "aggre0_snoc_axi", - "aggre0_cnoc_ahb", - "aggre0_noc_mpu_cfg"; - clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>, - <&gcc GCC_AGGRE0_CNOC_AHB_CLK>, - <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>; - power-domains = <&gcc AGGRE0_NOC_GDSC>; - }; - - a1noc: interconnect@562000 { - compatible = "qcom,msm8996-a1noc"; - reg = <0x00562000 0x5000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>; - }; - - a2noc: interconnect@583000 { - compatible = "qcom,msm8996-a2noc"; - reg = <0x00583000 0x7000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi"; - clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, - <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, - <&gcc GCC_AGGRE2_UFS_AXI_CLK>, - <&gcc GCC_UFS_AXI_CLK>; - }; - - mnoc: interconnect@5a4000 { - compatible = "qcom,msm8996-mnoc"; - reg = <0x005a4000 0x1c000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a", "iface"; - clocks = <&rpmcc RPM_SMD_MMAXI_CLK>, - <&rpmcc RPM_SMD_MMAXI_A_CLK>, - <&mmcc AHB_CLK_SRC>; - }; - - pnoc: interconnect@5c0000 { - compatible = "qcom,msm8996-pnoc"; - reg = <0x005c0000 0x3000>; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_PCNOC_A_CLK>; - }; - - tcsr_mutex: hwlock@740000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x00740000 0x20000>; - #hwlock-cells = <1>; - }; - - tcsr_1: syscon@760000 { - compatible = "qcom,tcsr-msm8996", "syscon"; - reg = <0x00760000 0x20000>; - }; - - tcsr_2: syscon@7a0000 { - compatible = "qcom,tcsr-msm8996", "syscon"; - reg = <0x007a0000 0x18000>; - }; - - mmcc: clock-controller@8c0000 { - compatible = "qcom,mmcc-msm8996"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x008c0000 0x40000>; - clocks = <&xo_board>, - <&gcc GPLL0>, - <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi0_phy 0>, - <&mdss_dsi1_phy 1>, - <&mdss_dsi1_phy 0>, - <&mdss_hdmi_phy>; - clock-names = "xo", - "gpll0", - "gcc_mmss_noc_cfg_ahb_clk", - "dsi0pll", - "dsi0pllbyte", - "dsi1pll", - "dsi1pllbyte", - "hdmipll"; - assigned-clocks = <&mmcc MMPLL9_PLL>, - <&mmcc MMPLL1_PLL>, - <&mmcc MMPLL3_PLL>, - <&mmcc MMPLL4_PLL>, - <&mmcc MMPLL5_PLL>; - assigned-clock-rates = <624000000>, - <810000000>, - <980000000>, - <960000000>, - <825000000>; - }; - - mdss: display-subsystem@900000 { - compatible = "qcom,mdss"; - - reg = <0x00900000 0x1000>, - <0x009b0000 0x1040>, - <0x009b8000 0x1040>; - reg-names = "mdss_phys", - "vbif_phys", - "vbif_nrt_phys"; - - power-domains = <&mmcc MDSS_GDSC>; - interrupts = ; - - interrupt-controller; - #interrupt-cells = <1>; - - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_MDP_CLK>; - clock-names = "iface", "core"; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - status = "disabled"; - - mdp: display-controller@901000 { - compatible = "qcom,msm8996-mdp5", "qcom,mdp5"; - reg = <0x00901000 0x90000>; - reg-names = "mdp_phys"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_MDP_CLK>, - <&mmcc SMMU_MDP_AXI_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "iommu", - "vsync"; - - iommus = <&mdp_smmu 0>; - - assigned-clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - assigned-clock-rates = <300000000>, - <19200000>; - - interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, - <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>, - <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>; - interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp5_intf3_out: endpoint { - remote-endpoint = <&mdss_hdmi_in>; - }; - }; - - port@1 { - reg = <1>; - mdp5_intf1_out: endpoint { - remote-endpoint = <&mdss_dsi0_in>; - }; - }; - - port@2 { - reg = <2>; - mdp5_intf2_out: endpoint { - remote-endpoint = <&mdss_dsi1_in>; - }; - }; - }; - }; - - mdss_dsi0: dsi@994000 { - compatible = "qcom,msm8996-dsi-ctrl", - "qcom,mdss-dsi-ctrl"; - reg = <0x00994000 0x400>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <4>; - - clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_BYTE0_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MMSS_MISC_AHB_CLK>, - <&mmcc MDSS_PCLK0_CLK>, - <&mmcc MDSS_ESC0_CLK>; - clock-names = "mdp_core", - "byte", - "iface", - "bus", - "core_mmss", - "pixel", - "core"; - assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; - - phys = <&mdss_dsi0_phy>; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdss_dsi0_in: endpoint { - remote-endpoint = <&mdp5_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - mdss_dsi0_out: endpoint { - }; - }; - }; - }; - - mdss_dsi0_phy: phy@994400 { - compatible = "qcom,dsi-phy-14nm"; - reg = <0x00994400 0x100>, - <0x00994500 0x300>, - <0x00994800 0x188>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; - - #clock-cells = <1>; - #phy-cells = <0>; - - clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "iface", "ref"; - status = "disabled"; - }; - - mdss_dsi1: dsi@996000 { - compatible = "qcom,msm8996-dsi-ctrl", - "qcom,mdss-dsi-ctrl"; - reg = <0x00996000 0x400>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <5>; - - clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_BYTE1_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MMSS_MISC_AHB_CLK>, - <&mmcc MDSS_PCLK1_CLK>, - <&mmcc MDSS_ESC1_CLK>; - clock-names = "mdp_core", - "byte", - "iface", - "bus", - "core_mmss", - "pixel", - "core"; - assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; - - phys = <&mdss_dsi1_phy>; - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdss_dsi1_in: endpoint { - remote-endpoint = <&mdp5_intf2_out>; - }; - }; - - port@1 { - reg = <1>; - mdss_dsi1_out: endpoint { - }; - }; - }; - }; - - mdss_dsi1_phy: phy@996400 { - compatible = "qcom,dsi-phy-14nm"; - reg = <0x00996400 0x100>, - <0x00996500 0x300>, - <0x00996800 0x188>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; - - #clock-cells = <1>; - #phy-cells = <0>; - - clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "iface", "ref"; - status = "disabled"; - }; - - mdss_hdmi: hdmi-tx@9a0000 { - compatible = "qcom,hdmi-tx-8996"; - reg = <0x009a0000 0x50c>, - <0x00070000 0x6158>, - <0x009e0000 0xfff>; - reg-names = "core_physical", - "qfprom_physical", - "hdcp_physical"; - - interrupt-parent = <&mdss>; - interrupts = <8>; - - clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_HDMI_CLK>, - <&mmcc MDSS_HDMI_AHB_CLK>, - <&mmcc MDSS_EXTPCLK_CLK>; - clock-names = - "mdp_core", - "iface", - "core", - "alt_iface", - "extp"; - - phys = <&mdss_hdmi_phy>; - #sound-dai-cells = <1>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdss_hdmi_in: endpoint { - remote-endpoint = <&mdp5_intf3_out>; - }; - }; - }; - }; - - mdss_hdmi_phy: phy@9a0600 { - #phy-cells = <0>; - compatible = "qcom,hdmi-phy-8996"; - reg = <0x009a0600 0x1c4>, - <0x009a0a00 0x124>, - <0x009a0c00 0x124>, - <0x009a0e00 0x124>, - <0x009a1000 0x124>, - <0x009a1200 0x0c8>; - reg-names = "hdmi_pll", - "hdmi_tx_l0", - "hdmi_tx_l1", - "hdmi_tx_l2", - "hdmi_tx_l3", - "hdmi_phy"; - - clocks = <&mmcc MDSS_AHB_CLK>, - <&gcc GCC_HDMI_CLKREF_CLK>, - <&xo_board>; - clock-names = "iface", - "ref", - "xo"; - - #clock-cells = <0>; - - status = "disabled"; - }; - }; - - gpu: gpu@b00000 { - compatible = "qcom,adreno-530.2", "qcom,adreno"; - - reg = <0x00b00000 0x3f000>; - reg-names = "kgsl_3d0_reg_memory"; - - interrupts = ; - - clocks = <&mmcc GPU_GX_GFX3D_CLK>, - <&mmcc GPU_AHB_CLK>, - <&mmcc GPU_GX_RBBMTIMER_CLK>, - <&gcc GCC_BIMC_GFX_CLK>, - <&gcc GCC_MMSS_BIMC_GFX_CLK>; - - clock-names = "core", - "iface", - "rbbmtimer", - "mem", - "mem_iface"; - - interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>; - interconnect-names = "gfx-mem"; - - power-domains = <&mmcc GPU_GX_GDSC>; - iommus = <&adreno_smmu 0>; - - nvmem-cells = <&speedbin_efuse>; - nvmem-cell-names = "speed_bin"; - - operating-points-v2 = <&gpu_opp_table>; - - status = "disabled"; - - #cooling-cells = <2>; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - /* - * 624Mhz is only available on speed bins 0 and 3. - * 560Mhz is only available on speed bins 0, 2 and 3. - * All the rest are available on all bins of the hardware. - */ - opp-624000000 { - opp-hz = /bits/ 64 <624000000>; - opp-supported-hw = <0x09>; - }; - opp-560000000 { - opp-hz = /bits/ 64 <560000000>; - opp-supported-hw = <0x0d>; - }; - opp-510000000 { - opp-hz = /bits/ 64 <510000000>; - opp-supported-hw = <0xff>; - }; - opp-401800000 { - opp-hz = /bits/ 64 <401800000>; - opp-supported-hw = <0xff>; - }; - opp-315000000 { - opp-hz = /bits/ 64 <315000000>; - opp-supported-hw = <0xff>; - }; - opp-214000000 { - opp-hz = /bits/ 64 <214000000>; - opp-supported-hw = <0xff>; - }; - opp-133000000 { - opp-hz = /bits/ 64 <133000000>; - opp-supported-hw = <0xff>; - }; - }; - - zap-shader { - memory-region = <&gpu_mem>; - }; - }; - - tlmm: pinctrl@1010000 { - compatible = "qcom,msm8996-pinctrl"; - reg = <0x01010000 0x300000>; - interrupts = ; - gpio-controller; - gpio-ranges = <&tlmm 0 0 150>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_spi1_default: blsp1-spi1-default-state { - spi-pins { - pins = "gpio0", "gpio1", "gpio3"; - function = "blsp_spi1"; - drive-strength = <12>; - bias-disable; - }; - - cs-pins { - pins = "gpio2"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp1_spi1_sleep: blsp1-spi1-sleep-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp2_uart2_2pins_default: blsp2-uart2-2pins-state { - pins = "gpio4", "gpio5"; - function = "blsp_uart8"; - drive-strength = <16>; - bias-disable; - }; - - blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state { - pins = "gpio4", "gpio5"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp2_i2c2_default: blsp2-i2c2-state { - pins = "gpio6", "gpio7"; - function = "blsp_i2c8"; - drive-strength = <16>; - bias-disable; - }; - - blsp2_i2c2_sleep: blsp2-i2c2-sleep-state { - pins = "gpio6", "gpio7"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp1_i2c6_default: blsp1-i2c6-state { - pins = "gpio27", "gpio28"; - function = "blsp_i2c6"; - drive-strength = <16>; - bias-disable; - }; - - blsp1_i2c6_sleep: blsp1-i2c6-sleep-state { - pins = "gpio27", "gpio28"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - - cci0_default: cci0-default-state { - pins = "gpio17", "gpio18"; - function = "cci_i2c"; - drive-strength = <16>; - bias-disable; - }; - - camera0_state_on: - camera_rear_default: camera-rear-default-state { - camera0_mclk: mclk0-pins { - pins = "gpio13"; - function = "cam_mclk"; - drive-strength = <16>; - bias-disable; - }; - - camera0_rst: rst-pins { - pins = "gpio25"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - camera0_pwdn: pwdn-pins { - pins = "gpio26"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - }; - - cci1_default: cci1-default-state { - pins = "gpio19", "gpio20"; - function = "cci_i2c"; - drive-strength = <16>; - bias-disable; - }; - - camera1_state_on: - camera_board_default: camera-board-default-state { - mclk1-pins { - pins = "gpio14"; - function = "cam_mclk"; - drive-strength = <16>; - bias-disable; - }; - - pwdn-pins { - pins = "gpio98"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - rst-pins { - pins = "gpio104"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - }; - - camera2_state_on: - camera_front_default: camera-front-default-state { - camera2_mclk: mclk2-pins { - pins = "gpio15"; - function = "cam_mclk"; - drive-strength = <16>; - bias-disable; - }; - - camera2_rst: rst-pins { - pins = "gpio23"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - pwdn-pins { - pins = "gpio133"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - }; - - pcie0_state_on: pcie0-state-on-state { - perst-pins { - pins = "gpio35"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio36"; - function = "pci_e0"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio37"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie0_state_off: pcie0-state-off-state { - perst-pins { - pins = "gpio35"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio36"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-pins { - pins = "gpio37"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - }; - - blsp1_uart2_default: blsp1-uart2-default-state { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "blsp_uart2"; - drive-strength = <16>; - bias-disable; - }; - - blsp1_uart2_sleep: blsp1-uart2-sleep-state { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp1_i2c3_default: blsp1-i2c3-default-state { - pins = "gpio47", "gpio48"; - function = "blsp_i2c3"; - drive-strength = <16>; - bias-disable; - }; - - blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { - pins = "gpio47", "gpio48"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp2_uart3_4pins_default: blsp2-uart3-4pins-state { - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - function = "blsp_uart9"; - drive-strength = <16>; - bias-disable; - }; - - blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state { - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - function = "blsp_uart9"; - drive-strength = <2>; - bias-disable; - }; - - blsp2_i2c3_default: blsp2-i2c3-state-state { - pins = "gpio51", "gpio52"; - function = "blsp_i2c9"; - drive-strength = <16>; - bias-disable; - }; - - blsp2_i2c3_sleep: blsp2-i2c3-sleep-state { - pins = "gpio51", "gpio52"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wcd_intr_default: wcd-intr-default-state { - pins = "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp2_i2c1_default: blsp2-i2c1-state { - pins = "gpio55", "gpio56"; - function = "blsp_i2c7"; - drive-strength = <16>; - bias-disable; - }; - - blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { - pins = "gpio55", "gpio56"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - blsp2_i2c5_default: blsp2-i2c5-state { - pins = "gpio60", "gpio61"; - function = "blsp_i2c11"; - drive-strength = <2>; - bias-disable; - }; - - /* Sleep state for BLSP2_I2C5 is missing.. */ - - cdc_reset_active: cdc-reset-active-state { - pins = "gpio64"; - function = "gpio"; - drive-strength = <16>; - bias-pull-down; - output-high; - }; - - cdc_reset_sleep: cdc-reset-sleep-state { - pins = "gpio64"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-low; - }; - - blsp2_spi6_default: blsp2-spi6-default-state { - spi-pins { - pins = "gpio85", "gpio86", "gpio88"; - function = "blsp_spi12"; - drive-strength = <12>; - bias-disable; - }; - - cs-pins { - pins = "gpio87"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - output-high; - }; - }; - - blsp2_spi6_sleep: blsp2-spi6-sleep-state { - pins = "gpio85", "gpio86", "gpio87", "gpio88"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - blsp2_i2c6_default: blsp2-i2c6-state { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - drive-strength = <16>; - bias-disable; - }; - - blsp2_i2c6_sleep: blsp2-i2c6-sleep-state { - pins = "gpio87", "gpio88"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - pcie1_state_on: pcie1-on-state { - perst-pins { - pins = "gpio130"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio131"; - function = "pci_e1"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio132"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - pcie1_state_off: pcie1-off-state { - /* Perst is missing? */ - clkreq-pins { - pins = "gpio131"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-pins { - pins = "gpio132"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - }; - - pcie2_state_on: pcie2-on-state { - perst-pins { - pins = "gpio114"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - clkreq-pins { - pins = "gpio115"; - function = "pci_e2"; - drive-strength = <2>; - bias-pull-up; - }; - - wake-pins { - pins = "gpio116"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - pcie2_state_off: pcie2-off-state { - /* Perst is missing? */ - clkreq-pins { - pins = "gpio115"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - wake-pins { - pins = "gpio116"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - }; - - sdc1_state_on: sdc1-on-state { - clk-pins { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd-pins { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data-pins { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <10>; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc1_state_off: sdc1-off-state { - clk-pins { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; - - cmd-pins { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - data-pins { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc2_state_on: sdc2-on-state { - clk-pins { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd-pins { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data-pins { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - }; - - sdc2_state_off: sdc2-off-state { - clk-pins { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; - - cmd-pins { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - data-pins { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; - }; - }; - - sram@290000 { - compatible = "qcom,rpm-stats"; - reg = <0x00290000 0x10000>; - }; - - spmi_bus: spmi@400f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0400f000 0x1000>, - <0x04400000 0x800000>, - <0x04c00000 0x800000>, - <0x05800000 0x200000>, - <0x0400a000 0x002100>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = ; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - bus@0 { - power-domains = <&gcc AGGRE0_NOC_GDSC>; - compatible = "simple-pm-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0xffffffff>; - - pcie0: pcie@600000 { - compatible = "qcom,pcie-msm8996"; - status = "disabled"; - power-domains = <&gcc PCIE0_GDSC>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - - reg = <0x00600000 0x2000>, - <0x0c000000 0xf1d>, - <0x0c000f20 0xa8>, - <0x0c100000 0x100000>; - reg-names = "parf", "dbi", "elbi","config"; - - phys = <&pciephy_0>; - phy-names = "pciephy"; - - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>, - <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; - - device_type = "pci"; - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie0_state_on>; - pinctrl-1 = <&pcie0_state_off>; - - linux,pci-domain = <0>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>; - - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave"; - }; - - pcie1: pcie@608000 { - compatible = "qcom,pcie-msm8996"; - power-domains = <&gcc PCIE1_GDSC>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - - status = "disabled"; - - reg = <0x00608000 0x2000>, - <0x0d000000 0xf1d>, - <0x0d000f20 0xa8>, - <0x0d100000 0x100000>; - - reg-names = "parf", "dbi", "elbi","config"; - - phys = <&pciephy_1>; - phy-names = "pciephy"; - - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>, - <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; - - device_type = "pci"; - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie1_state_on>; - pinctrl-1 = <&pcie1_state_off>; - - linux,pci-domain = <1>; - - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_AXI_CLK>; - - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave"; - }; - - pcie2: pcie@610000 { - compatible = "qcom,pcie-msm8996"; - power-domains = <&gcc PCIE2_GDSC>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - status = "disabled"; - reg = <0x00610000 0x2000>, - <0x0e000000 0xf1d>, - <0x0e000f20 0xa8>, - <0x0e100000 0x100000>; - - reg-names = "parf", "dbi", "elbi","config"; - - phys = <&pciephy_2>; - phy-names = "pciephy"; - - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>, - <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; - - device_type = "pci"; - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie2_state_on>; - pinctrl-1 = <&pcie2_state_off>; - - linux,pci-domain = <2>; - clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, - <&gcc GCC_PCIE_2_AUX_CLK>, - <&gcc GCC_PCIE_2_CFG_AHB_CLK>, - <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_2_SLV_AXI_CLK>; - - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave"; - }; - }; - - ufshc: ufshc@624000 { - compatible = "qcom,msm8996-ufshc", "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0x00624000 0x2500>; - interrupts = ; - - phys = <&ufsphy_lane>; - phy-names = "ufsphy"; - - power-domains = <&gcc UFS_GDSC>; - - clock-names = - "core_clk_src", - "core_clk", - "bus_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro_src", - "core_clk_unipro", - "core_clk_ice", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk"; - clocks = - <&gcc UFS_AXI_CLK_SRC>, - <&gcc GCC_UFS_AXI_CLK>, - <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, - <&gcc GCC_AGGRE2_UFS_AXI_CLK>, - <&gcc GCC_UFS_AHB_CLK>, - <&gcc UFS_ICE_CORE_CLK_SRC>, - <&gcc GCC_UFS_UNIPRO_CORE_CLK>, - <&gcc GCC_UFS_ICE_CORE_CLK>, - <&rpmcc RPM_SMD_LN_BB_CLK>, - <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_RX_SYMBOL_0_CLK>; - freq-table-hz = - <100000000 200000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>, - <150000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - - interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>, - <&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>; - interconnect-names = "ufs-ddr", "cpu-ufs"; - - lanes-per-direction = <1>; - #reset-cells = <1>; - status = "disabled"; - }; - - ufsphy: phy@627000 { - compatible = "qcom,msm8996-qmp-ufs-phy"; - reg = <0x00627000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_UFS_CLKREF_CLK>; - clock-names = "ref"; - - resets = <&ufshc 0>; - reset-names = "ufsphy"; - status = "disabled"; - - ufsphy_lane: phy@627400 { - reg = <0x627400 0x12c>, - <0x627600 0x200>, - <0x627c00 0x1b4>; - #clock-cells = <1>; - #phy-cells = <0>; - }; - }; - - camss: camss@a34000 { - compatible = "qcom,msm8996-camss"; - reg = <0x00a34000 0x1000>, - <0x00a00030 0x4>, - <0x00a35000 0x1000>, - <0x00a00038 0x4>, - <0x00a36000 0x1000>, - <0x00a00040 0x4>, - <0x00a30000 0x100>, - <0x00a30400 0x100>, - <0x00a30800 0x100>, - <0x00a30c00 0x100>, - <0x00a31000 0x500>, - <0x00a00020 0x10>, - <0x00a10000 0x1000>, - <0x00a14000 0x1000>; - reg-names = "csiphy0", - "csiphy0_clk_mux", - "csiphy1", - "csiphy1_clk_mux", - "csiphy2", - "csiphy2_clk_mux", - "csid0", - "csid1", - "csid2", - "csid3", - "ispif", - "csi_clk_mux", - "vfe0", - "vfe1"; - interrupts = , - , - , - , - , - , - , - , - , - ; - interrupt-names = "csiphy0", - "csiphy1", - "csiphy2", - "csid0", - "csid1", - "csid2", - "csid3", - "ispif", - "vfe0", - "vfe1"; - power-domains = <&mmcc VFE0_GDSC>, - <&mmcc VFE1_GDSC>; - clocks = <&mmcc CAMSS_TOP_AHB_CLK>, - <&mmcc CAMSS_ISPIF_AHB_CLK>, - <&mmcc CAMSS_CSI0PHYTIMER_CLK>, - <&mmcc CAMSS_CSI1PHYTIMER_CLK>, - <&mmcc CAMSS_CSI2PHYTIMER_CLK>, - <&mmcc CAMSS_CSI0_AHB_CLK>, - <&mmcc CAMSS_CSI0_CLK>, - <&mmcc CAMSS_CSI0PHY_CLK>, - <&mmcc CAMSS_CSI0PIX_CLK>, - <&mmcc CAMSS_CSI0RDI_CLK>, - <&mmcc CAMSS_CSI1_AHB_CLK>, - <&mmcc CAMSS_CSI1_CLK>, - <&mmcc CAMSS_CSI1PHY_CLK>, - <&mmcc CAMSS_CSI1PIX_CLK>, - <&mmcc CAMSS_CSI1RDI_CLK>, - <&mmcc CAMSS_CSI2_AHB_CLK>, - <&mmcc CAMSS_CSI2_CLK>, - <&mmcc CAMSS_CSI2PHY_CLK>, - <&mmcc CAMSS_CSI2PIX_CLK>, - <&mmcc CAMSS_CSI2RDI_CLK>, - <&mmcc CAMSS_CSI3_AHB_CLK>, - <&mmcc CAMSS_CSI3_CLK>, - <&mmcc CAMSS_CSI3PHY_CLK>, - <&mmcc CAMSS_CSI3PIX_CLK>, - <&mmcc CAMSS_CSI3RDI_CLK>, - <&mmcc CAMSS_AHB_CLK>, - <&mmcc CAMSS_VFE0_CLK>, - <&mmcc CAMSS_CSI_VFE0_CLK>, - <&mmcc CAMSS_VFE0_AHB_CLK>, - <&mmcc CAMSS_VFE0_STREAM_CLK>, - <&mmcc CAMSS_VFE1_CLK>, - <&mmcc CAMSS_CSI_VFE1_CLK>, - <&mmcc CAMSS_VFE1_AHB_CLK>, - <&mmcc CAMSS_VFE1_STREAM_CLK>, - <&mmcc CAMSS_VFE_AHB_CLK>, - <&mmcc CAMSS_VFE_AXI_CLK>; - clock-names = "top_ahb", - "ispif_ahb", - "csiphy0_timer", - "csiphy1_timer", - "csiphy2_timer", - "csi0_ahb", - "csi0", - "csi0_phy", - "csi0_pix", - "csi0_rdi", - "csi1_ahb", - "csi1", - "csi1_phy", - "csi1_pix", - "csi1_rdi", - "csi2_ahb", - "csi2", - "csi2_phy", - "csi2_pix", - "csi2_rdi", - "csi3_ahb", - "csi3", - "csi3_phy", - "csi3_pix", - "csi3_rdi", - "ahb", - "vfe0", - "csi_vfe0", - "vfe0_ahb", - "vfe0_stream", - "vfe1", - "csi_vfe1", - "vfe1_ahb", - "vfe1_stream", - "vfe_ahb", - "vfe_axi"; - iommus = <&vfe_smmu 0>, - <&vfe_smmu 1>, - <&vfe_smmu 2>, - <&vfe_smmu 3>; - status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - cci: cci@a0c000 { - compatible = "qcom,msm8996-cci"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xa0c000 0x1000>; - interrupts = ; - power-domains = <&mmcc CAMSS_GDSC>; - clocks = <&mmcc CAMSS_TOP_AHB_CLK>, - <&mmcc CAMSS_CCI_AHB_CLK>, - <&mmcc CAMSS_CCI_CLK>, - <&mmcc CAMSS_AHB_CLK>; - clock-names = "camss_top_ahb", - "cci_ahb", - "cci", - "camss_ahb"; - assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>, - <&mmcc CAMSS_CCI_CLK>; - assigned-clock-rates = <80000000>, <37500000>; - pinctrl-names = "default"; - pinctrl-0 = <&cci0_default &cci1_default>; - status = "disabled"; - - cci_i2c0: i2c-bus@0 { - reg = <0>; - clock-frequency = <400000>; - #address-cells = <1>; - #size-cells = <0>; - }; - - cci_i2c1: i2c-bus@1 { - reg = <1>; - clock-frequency = <400000>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - adreno_smmu: iommu@b40000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; - reg = <0x00b40000 0x10000>; - - #global-interrupts = <1>; - interrupts = , - , - ; - #iommu-cells = <1>; - - clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>, - <&mmcc GPU_AHB_CLK>; - clock-names = "bus", "iface"; - - power-domains = <&mmcc GPU_GDSC>; - }; - - venus: video-codec@c00000 { - compatible = "qcom,msm8996-venus"; - reg = <0x00c00000 0xff000>; - interrupts = ; - power-domains = <&mmcc VENUS_GDSC>; - clocks = <&mmcc VIDEO_CORE_CLK>, - <&mmcc VIDEO_AHB_CLK>, - <&mmcc VIDEO_AXI_CLK>, - <&mmcc VIDEO_MAXI_CLK>; - clock-names = "core", "iface", "bus", "mbus"; - interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>, - <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>; - interconnect-names = "video-mem", "cpu-cfg"; - iommus = <&venus_smmu 0x00>, - <&venus_smmu 0x01>, - <&venus_smmu 0x0a>, - <&venus_smmu 0x07>, - <&venus_smmu 0x0e>, - <&venus_smmu 0x0f>, - <&venus_smmu 0x08>, - <&venus_smmu 0x09>, - <&venus_smmu 0x0b>, - <&venus_smmu 0x0c>, - <&venus_smmu 0x0d>, - <&venus_smmu 0x10>, - <&venus_smmu 0x11>, - <&venus_smmu 0x21>, - <&venus_smmu 0x28>, - <&venus_smmu 0x29>, - <&venus_smmu 0x2b>, - <&venus_smmu 0x2c>, - <&venus_smmu 0x2d>, - <&venus_smmu 0x31>; - memory-region = <&venus_mem>; - status = "disabled"; - - video-decoder { - compatible = "venus-decoder"; - clocks = <&mmcc VIDEO_SUBCORE0_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE0_GDSC>; - }; - - video-encoder { - compatible = "venus-encoder"; - clocks = <&mmcc VIDEO_SUBCORE1_CLK>; - clock-names = "core"; - power-domains = <&mmcc VENUS_CORE1_GDSC>; - }; - }; - - mdp_smmu: iommu@d00000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0x00d00000 0x10000>; - - #global-interrupts = <1>; - interrupts = , - , - ; - #iommu-cells = <1>; - clocks = <&mmcc SMMU_MDP_AXI_CLK>, - <&mmcc SMMU_MDP_AHB_CLK>; - clock-names = "bus", "iface"; - - power-domains = <&mmcc MDSS_GDSC>; - }; - - venus_smmu: iommu@d40000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0x00d40000 0x20000>; - #global-interrupts = <1>; - interrupts = , - , - , - , - , - , - , - ; - power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; - clocks = <&mmcc SMMU_VIDEO_AXI_CLK>, - <&mmcc SMMU_VIDEO_AHB_CLK>; - clock-names = "bus", "iface"; - #iommu-cells = <1>; - status = "okay"; - }; - - vfe_smmu: iommu@da0000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0x00da0000 0x10000>; - - #global-interrupts = <1>; - interrupts = , - , - ; - power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; - clocks = <&mmcc SMMU_VFE_AXI_CLK>, - <&mmcc SMMU_VFE_AHB_CLK>; - clock-names = "bus", "iface"; - #iommu-cells = <1>; - }; - - lpass_q6_smmu: iommu@1600000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0x01600000 0x20000>; - #iommu-cells = <1>; - power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; - - #global-interrupts = <1>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - ; - - clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>, - <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>; - clock-names = "bus", "iface"; - }; - - slpi_pil: remoteproc@1c00000 { - compatible = "qcom,msm8996-slpi-pil"; - reg = <0x01c00000 0x4000>; - - interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&xo_board>, - <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; - clock-names = "xo", "aggre2"; - - memory-region = <&slpi_mem>; - - qcom,smem-states = <&slpi_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - power-domains = <&rpmpd MSM8996_VDDSSCX>; - power-domain-names = "ssc_cx"; - - status = "disabled"; - - smd-edge { - interrupts = ; - - label = "dsps"; - mboxes = <&apcs_glb 25>; - qcom,smd-edge = <3>; - qcom,remote-pid = <3>; - }; - }; - - mss_pil: remoteproc@2080000 { - compatible = "qcom,msm8996-mss-pil"; - reg = <0x2080000 0x100>, - <0x2180000 0x020>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, - <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack", - "shutdown-ack"; - - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>, - <&gcc GCC_MSS_GPLL0_DIV_CLK>, - <&gcc GCC_MSS_SNOC_AXI_CLK>, - <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, - <&rpmcc RPM_SMD_PCNOC_CLK>, - <&rpmcc RPM_SMD_QDSS_CLK>; - clock-names = "iface", "bus", "mem", "xo", "gpll0_mss", - "snoc_axi", "mnoc_axi", "pnoc", "qdss"; - - resets = <&gcc GCC_MSS_RESTART>; - reset-names = "mss_restart"; - - power-domains = <&rpmpd MSM8996_VDDCX>, - <&rpmpd MSM8996_VDDMX>; - power-domain-names = "cx", "mx"; - - qcom,smem-states = <&mpss_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>; - - status = "disabled"; - - mba { - memory-region = <&mba_mem>; - }; - - mpss { - memory-region = <&mpss_mem>; - }; - - metadata { - memory-region = <&mdata_mem>; - }; - - smd-edge { - interrupts = ; - - label = "mpss"; - mboxes = <&apcs_glb 12>; - qcom,smd-edge = <0>; - qcom,remote-pid = <1>; - }; - }; - - stm@3002000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0x3002000 0x1000>, - <0x8280000 0x180000>; - reg-names = "stm-base", "stm-stimulus-base"; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - out-ports { - port { - stm_out: endpoint { - remote-endpoint = - <&funnel0_in>; - }; - }; - }; - }; - - tpiu@3020000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0x3020000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - port { - tpiu_in: endpoint { - remote-endpoint = - <&replicator_out1>; - }; - }; - }; - }; - - funnel@3021000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x3021000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@7 { - reg = <7>; - funnel0_in: endpoint { - remote-endpoint = - <&stm_out>; - }; - }; - }; - - out-ports { - port { - funnel0_out: endpoint { - remote-endpoint = - <&merge_funnel_in0>; - }; - }; - }; - }; - - funnel@3022000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x3022000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@6 { - reg = <6>; - funnel1_in: endpoint { - remote-endpoint = - <&apss_merge_funnel_out>; - }; - }; - }; - - out-ports { - port { - funnel1_out: endpoint { - remote-endpoint = - <&merge_funnel_in1>; - }; - }; - }; - }; - - funnel@3023000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x3023000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - - out-ports { - port { - funnel2_out: endpoint { - remote-endpoint = - <&merge_funnel_in2>; - }; - }; - }; - }; - - funnel@3025000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x3025000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - merge_funnel_in0: endpoint { - remote-endpoint = - <&funnel0_out>; - }; - }; - - port@1 { - reg = <1>; - merge_funnel_in1: endpoint { - remote-endpoint = - <&funnel1_out>; - }; - }; - - port@2 { - reg = <2>; - merge_funnel_in2: endpoint { - remote-endpoint = - <&funnel2_out>; - }; - }; - }; - - out-ports { - port { - merge_funnel_out: endpoint { - remote-endpoint = - <&etf_in>; - }; - }; - }; - }; - - replicator@3026000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0x3026000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = - <&etf_out>; - }; - }; - }; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - replicator_out0: endpoint { - remote-endpoint = - <&etr_in>; - }; - }; - - port@1 { - reg = <1>; - replicator_out1: endpoint { - remote-endpoint = - <&tpiu_in>; - }; - }; - }; - }; - - etf@3027000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x3027000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - port { - etf_in: endpoint { - remote-endpoint = - <&merge_funnel_out>; - }; - }; - }; - - out-ports { - port { - etf_out: endpoint { - remote-endpoint = - <&replicator_in>; - }; - }; - }; - }; - - etr@3028000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x3028000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - arm,scatter-gather; - - in-ports { - port { - etr_in: endpoint { - remote-endpoint = - <&replicator_out0>; - }; - }; - }; - }; - - debug@3810000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0x3810000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - cpu = <&CPU0>; - }; - - etm@3840000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x3840000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - cpu = <&CPU0>; - - out-ports { - port { - etm0_out: endpoint { - remote-endpoint = - <&apss_funnel0_in0>; - }; - }; - }; - }; - - debug@3910000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0x3910000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - cpu = <&CPU1>; - }; - - etm@3940000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x3940000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - cpu = <&CPU1>; - - out-ports { - port { - etm1_out: endpoint { - remote-endpoint = - <&apss_funnel0_in1>; - }; - }; - }; - }; - - funnel@39b0000 { /* APSS Funnel 0 */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x39b0000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - apss_funnel0_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - - port@1 { - reg = <1>; - apss_funnel0_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - }; - - out-ports { - port { - apss_funnel0_out: endpoint { - remote-endpoint = - <&apss_merge_funnel_in0>; - }; - }; - }; - }; - - debug@3a10000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0x3a10000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - cpu = <&CPU2>; - }; - - etm@3a40000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x3a40000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - cpu = <&CPU2>; - - out-ports { - port { - etm2_out: endpoint { - remote-endpoint = - <&apss_funnel1_in0>; - }; - }; - }; - }; - - debug@3b10000 { - compatible = "arm,coresight-cpu-debug", "arm,primecell"; - reg = <0x3b10000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>; - clock-names = "apb_pclk"; - - cpu = <&CPU3>; - }; - - etm@3b40000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0x3b40000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - cpu = <&CPU3>; - - out-ports { - port { - etm3_out: endpoint { - remote-endpoint = - <&apss_funnel1_in1>; - }; - }; - }; - }; - - funnel@3bb0000 { /* APSS Funnel 1 */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x3bb0000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - apss_funnel1_in0: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - - port@1 { - reg = <1>; - apss_funnel1_in1: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - }; - - out-ports { - port { - apss_funnel1_out: endpoint { - remote-endpoint = - <&apss_merge_funnel_in1>; - }; - }; - }; - }; - - funnel@3bc0000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x3bc0000 0x1000>; - - clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - apss_merge_funnel_in0: endpoint { - remote-endpoint = - <&apss_funnel0_out>; - }; - }; - - port@1 { - reg = <1>; - apss_merge_funnel_in1: endpoint { - remote-endpoint = - <&apss_funnel1_out>; - }; - }; - }; - - out-ports { - port { - apss_merge_funnel_out: endpoint { - remote-endpoint = - <&funnel1_in>; - }; - }; - }; - }; - - kryocc: clock-controller@6400000 { - compatible = "qcom,msm8996-apcc"; - reg = <0x06400000 0x90000>; - - clock-names = "xo", "sys_apcs_aux"; - clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; - - #clock-cells = <1>; - }; - - usb3: usb@6af8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x06af8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - interrupts = , - ; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; - - clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>, - <&gcc GCC_AGGRE2_USB3_AXI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>; - assigned-clock-rates = <19200000>, <120000000>; - - interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>, - <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>; - interconnect-names = "usb-ddr", "apps-usb"; - - power-domains = <&gcc USB30_GDSC>; - status = "disabled"; - - usb3_dwc3: usb@6a00000 { - compatible = "snps,dwc3"; - reg = <0x06a00000 0xcc00>; - interrupts = ; - phys = <&hsusb_phy1>, <&ssusb_phy_0>; - phy-names = "usb2-phy", "usb3-phy"; - snps,hird-threshold = /bits/ 8 <0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,is-utmi-l1-suspend; - tx-fifo-resize; - }; - }; - - usb3phy: phy@7410000 { - compatible = "qcom,msm8996-qmp-usb3-phy"; - reg = <0x07410000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - resets = <&gcc GCC_USB3_PHY_BCR>, - <&gcc GCC_USB3PHY_PHY_BCR>; - reset-names = "phy", "common"; - status = "disabled"; - - ssusb_phy_0: phy@7410200 { - reg = <0x07410200 0x200>, - <0x07410400 0x130>, - <0x07410600 0x1a8>; - #phy-cells = <0>; - - #clock-cells = <0>; - clock-output-names = "usb3_phy_pipe_clk_src"; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - }; - }; - - hsusb_phy1: phy@7411000 { - compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x07411000 0x180>; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX1_USB2_CLKREF_CLK>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - nvmem-cells = <&qusb2p_hstx_trim>; - status = "disabled"; - }; - - hsusb_phy2: phy@7412000 { - compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x07412000 0x180>; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX2_USB2_CLKREF_CLK>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - nvmem-cells = <&qusb2s_hstx_trim>; - status = "disabled"; - }; - - sdhc1: mmc@7464900 { - compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x07464900 0x11c>, <0x07464000 0x800>; - reg-names = "hc", "core"; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clock-names = "iface", "core", "xo"; - clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&rpmcc RPM_SMD_XO_CLK_SRC>; - resets = <&gcc GCC_SDCC1_BCR>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_state_on>; - pinctrl-1 = <&sdc1_state_off>; - - bus-width = <8>; - non-removable; - status = "disabled"; - }; - - sdhc2: mmc@74a4900 { - compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x074a4900 0x314>, <0x074a4000 0x800>; - reg-names = "hc", "core"; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clock-names = "iface", "core", "xo"; - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmcc RPM_SMD_XO_CLK_SRC>; - resets = <&gcc GCC_SDCC2_BCR>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_state_on>; - pinctrl-1 = <&sdc2_state_off>; - - bus-width = <4>; - status = "disabled"; - }; - - blsp1_dma: dma-controller@7544000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07544000 0x2b000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "bam_clk"; - qcom,controlled-remotely; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - blsp1_uart2: serial@7570000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x07570000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - blsp1_spi1: spi@7575000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x07575000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_spi1_default>; - pinctrl-1 = <&blsp1_spi1_sleep>; - dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_i2c3: i2c@7577000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x07577000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_i2c3_default>; - pinctrl-1 = <&blsp1_i2c3_sleep>; - dmas = <&blsp1_dma 16>, <&blsp1_dma 17>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_i2c6: i2c@757a000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x757a000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_i2c6_default>; - pinctrl-1 = <&blsp1_i2c6_sleep>; - dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_dma: dma-controller@7584000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07584000 0x2b000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - qcom,controlled-remotely; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - blsp2_uart2: serial@75b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x075b0000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp2_uart3: serial@75b1000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x075b1000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp2_i2c1: i2c@75b5000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x075b5000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c1_default>; - pinctrl-1 = <&blsp2_i2c1_sleep>; - dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_i2c2: i2c@75b6000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x075b6000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c2_default>; - pinctrl-1 = <&blsp2_i2c2_sleep>; - dmas = <&blsp2_dma 14>, <&blsp2_dma 15>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_i2c3: i2c@75b7000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x075b7000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c3_default>; - pinctrl-1 = <&blsp2_i2c3_sleep>; - dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_i2c5: i2c@75b9000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x75b9000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_i2c5_default>; - dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_i2c6: i2c@75ba000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x75ba000 0x1000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c6_default>; - pinctrl-1 = <&blsp2_i2c6_sleep>; - dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_spi6: spi@75ba000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x075ba000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_spi6_default>; - pinctrl-1 = <&blsp2_spi6_sleep>; - dmas = <&blsp2_dma 22>, <&blsp2_dma 23>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - usb2: usb@76f8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x076f8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - interrupts = ; - interrupt-names = "hs_phy_irq"; - - clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, - <&gcc GCC_USB20_MASTER_CLK>, - <&gcc GCC_USB20_MOCK_UTMI_CLK>, - <&gcc GCC_USB20_SLEEP_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, - <&gcc GCC_USB20_MASTER_CLK>; - assigned-clock-rates = <19200000>, <60000000>; - - power-domains = <&gcc USB30_GDSC>; - qcom,select-utmi-as-pipe-clk; - status = "disabled"; - - usb2_dwc3: usb@7600000 { - compatible = "snps,dwc3"; - reg = <0x07600000 0xcc00>; - interrupts = ; - phys = <&hsusb_phy2>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - }; - }; - - slimbam: dma-controller@9184000 { - compatible = "qcom,bam-v1.7.0"; - qcom,controlled-remotely; - reg = <0x09184000 0x32000>; - num-channels = <31>; - interrupts = ; - #dma-cells = <1>; - qcom,ee = <1>; - qcom,num-ees = <2>; - }; - - slim_msm: slim-ngd@91c0000 { - compatible = "qcom,slim-ngd-v1.5.0"; - reg = <0x091c0000 0x2c000>; - interrupts = ; - dmas = <&slimbam 3>, <&slimbam 4>; - dma-names = "rx", "tx"; - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - adsp_pil: remoteproc@9300000 { - compatible = "qcom,msm8996-adsp-pil"; - reg = <0x09300000 0x80000>; - - interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "xo"; - - memory-region = <&adsp_mem>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - power-domains = <&rpmpd MSM8996_VDDCX>; - power-domain-names = "cx"; - - status = "disabled"; - - smd-edge { - interrupts = ; - - label = "lpass"; - mboxes = <&apcs_glb 8>; - qcom,smd-edge = <1>; - qcom,remote-pid = <2>; - - apr { - power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; - compatible = "qcom,apr-v2"; - qcom,smd-channels = "apr_audio_svc"; - qcom,domain = ; - #address-cells = <1>; - #size-cells = <0>; - - service@3 { - reg = ; - compatible = "qcom,q6core"; - }; - - q6afe: service@4 { - compatible = "qcom,q6afe"; - reg = ; - q6afedai: dais { - compatible = "qcom,q6afe-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - dai@1 { - reg = <1>; - }; - }; - }; - - q6asm: service@7 { - compatible = "qcom,q6asm"; - reg = ; - q6asmdai: dais { - compatible = "qcom,q6asm-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - iommus = <&lpass_q6_smmu 1>; - }; - }; - - q6adm: service@8 { - compatible = "qcom,q6adm"; - reg = ; - q6routing: routing { - compatible = "qcom,q6adm-routing"; - #sound-dai-cells = <0>; - }; - }; - }; - }; - }; - - apcs_glb: mailbox@9820000 { - compatible = "qcom,msm8996-apcs-hmss-global"; - reg = <0x09820000 0x1000>; - - #mbox-cells = <1>; - #clock-cells = <0>; - }; - - timer@9840000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0x09840000 0x1000>; - clock-frequency = <19200000>; - - frame@9850000 { - frame-number = <0>; - interrupts = , - ; - reg = <0x09850000 0x1000>, - <0x09860000 0x1000>; - }; - - frame@9870000 { - frame-number = <1>; - interrupts = ; - reg = <0x09870000 0x1000>; - status = "disabled"; - }; - - frame@9880000 { - frame-number = <2>; - interrupts = ; - reg = <0x09880000 0x1000>; - status = "disabled"; - }; - - frame@9890000 { - frame-number = <3>; - interrupts = ; - reg = <0x09890000 0x1000>; - status = "disabled"; - }; - - frame@98a0000 { - frame-number = <4>; - interrupts = ; - reg = <0x098a0000 0x1000>; - status = "disabled"; - }; - - frame@98b0000 { - frame-number = <5>; - interrupts = ; - reg = <0x098b0000 0x1000>; - status = "disabled"; - }; - - frame@98c0000 { - frame-number = <6>; - interrupts = ; - reg = <0x098c0000 0x1000>; - status = "disabled"; - }; - }; - - saw3: syscon@9a10000 { - compatible = "syscon"; - reg = <0x09a10000 0x1000>; - }; - - cbf: clock-controller@9a11000 { - compatible = "qcom,msm8996-cbf"; - reg = <0x09a11000 0x10000>; - clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>; - #clock-cells = <0>; - #interconnect-cells = <1>; - }; - - intc: interrupt-controller@9bc0000 { - compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; - #interrupt-cells = <3>; - interrupt-controller; - #redistributor-regions = <1>; - redistributor-stride = <0x0 0x40000>; - reg = <0x09bc0000 0x10000>, - <0x09c00000 0x100000>; - interrupts = ; - }; - }; - - sound: sound { - }; - - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 3>; - - trips { - cpu0_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu0_crit: cpu-crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 5>; - - trips { - cpu1_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu1_crit: cpu-crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 8>; - - trips { - cpu2_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu2_crit: cpu-crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 10>; - - trips { - cpu3_alert0: trip-point0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu3_crit: cpu-crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - gpu-top-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 6>; - - trips { - gpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map0 { - trip = <&gpu1_alert0>; - cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - gpu-bottom-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 7>; - - trips { - gpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map0 { - trip = <&gpu2_alert0>; - cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - m4m-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 1>; - - trips { - m4m_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - l3-or-venus-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 2>; - - trips { - l3_or_venus_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - cluster0-l2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 7>; - - trips { - cluster0_l2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - cluster1-l2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 12>; - - trips { - cluster1_l2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - camera-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 1>; - - trips { - camera_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 2>; - - trips { - q6_dsp_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - mem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 3>; - - trips { - mem_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 4>; - - trips { - modemtx_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; -}; diff --git a/arch/arm/dts/pm8916.dtsi b/arch/arm/dts/pm8916.dtsi deleted file mode 100644 index f4de86787743..000000000000 --- a/arch/arm/dts/pm8916.dtsi +++ /dev/null @@ -1,178 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include -#include -#include - -&spmi_bus { - - pm8916_0: pmic@0 { - compatible = "qcom,pm8916", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pon@800 { - compatible = "qcom,pm8916-pon"; - reg = <0x800>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pwrkey { - compatible = "qcom,pm8941-pwrkey"; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; - - pm8916_resin: resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - status = "disabled"; - }; - - watchdog { - compatible = "qcom,pm8916-wdt"; - interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; - timeout-sec = <60>; - }; - }; - - pm8916_usbin: usb-detect@1300 { - compatible = "qcom,pm8941-misc"; - reg = <0x1300>; - interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "usb_vbus"; - status = "disabled"; - }; - - pm8916_temp: temp-alarm@2400 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400>; - interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; - io-channels = <&pm8916_vadc VADC_DIE_TEMP>; - io-channel-names = "thermal"; - #thermal-sensor-cells = <0>; - }; - - pm8916_vadc: adc@3100 { - compatible = "qcom,spmi-vadc"; - reg = <0x3100>; - interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - #io-channel-cells = <1>; - - channel@0 { - reg = ; - qcom,pre-scaling = <1 10>; - }; - channel@7 { - reg = ; - qcom,pre-scaling = <1 3>; - }; - channel@8 { - reg = ; - }; - channel@9 { - reg = ; - }; - channel@a { - reg = ; - }; - channel@e { - reg = ; - }; - channel@f { - reg = ; - }; - }; - - rtc@6000 { - compatible = "qcom,pm8941-rtc"; - reg = <0x6000>, <0x6100>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; - }; - - pm8916_mpps: mpps@a000 { - compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp"; - reg = <0xa000>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8916_mpps 0 0 4>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pm8916_gpios: gpio@c000 { - compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8916_gpios 0 0 4>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8916_1: pmic@1 { - compatible = "qcom,pm8916", "qcom,spmi-pmic"; - reg = <0x1 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8916_pwm: pwm { - compatible = "qcom,pm8916-pwm"; - - #pwm-cells = <2>; - - status = "disabled"; - }; - - pm8916_vib: vibrator@c000 { - compatible = "qcom,pm8916-vib"; - reg = <0xc000>; - status = "disabled"; - }; - - pm8916_codec: audio-codec@f000 { - compatible = "qcom,pm8916-wcd-analog-codec"; - reg = <0xf000>; - interrupt-parent = <&spmi_bus>; - interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, - <0x1 0xf0 0x1 IRQ_TYPE_NONE>, - <0x1 0xf0 0x2 IRQ_TYPE_NONE>, - <0x1 0xf0 0x3 IRQ_TYPE_NONE>, - <0x1 0xf0 0x4 IRQ_TYPE_NONE>, - <0x1 0xf0 0x5 IRQ_TYPE_NONE>, - <0x1 0xf0 0x6 IRQ_TYPE_NONE>, - <0x1 0xf0 0x7 IRQ_TYPE_NONE>, - <0x1 0xf1 0x0 IRQ_TYPE_NONE>, - <0x1 0xf1 0x1 IRQ_TYPE_NONE>, - <0x1 0xf1 0x2 IRQ_TYPE_NONE>, - <0x1 0xf1 0x3 IRQ_TYPE_NONE>, - <0x1 0xf1 0x4 IRQ_TYPE_NONE>, - <0x1 0xf1 0x5 IRQ_TYPE_NONE>; - interrupt-names = "cdc_spk_cnp_int", - "cdc_spk_clip_int", - "cdc_spk_ocp_int", - "mbhc_ins_rem_det1", - "mbhc_but_rel_det", - "mbhc_but_press_det", - "mbhc_ins_rem_det", - "mbhc_switch_int", - "cdc_ear_ocp_int", - "cdc_hphr_ocp_int", - "cdc_hphl_ocp_det", - "cdc_ear_cnp_int", - "cdc_hphr_cnp_int", - "cdc_hphl_cnp_int"; - #sound-dai-cells = <1>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/pm8994.dtsi b/arch/arm/dts/pm8994.dtsi deleted file mode 100644 index d44a95caf04a..000000000000 --- a/arch/arm/dts/pm8994.dtsi +++ /dev/null @@ -1,152 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include -#include -#include - -/ { - thermal-zones { - pm8994-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&pm8994_temp>; - - trips { - pm8994_alert0: pm8994-alert0 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - pm8994_crit: pm8994-crit { - temperature = <125000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; -}; - -&spmi_bus { - - pmic@0 { - compatible = "qcom,pm8994", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@6000 { - compatible = "qcom,pm8941-rtc"; - reg = <0x6000>, <0x6100>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; - }; - - pm8994_pon: pon@800 { - compatible = "qcom,pm8916-pon"; - reg = <0x800>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pwrkey { - compatible = "qcom,pm8941-pwrkey"; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; - - pm8994_resin: resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - status = "disabled"; - }; - }; - - pm8994_temp: temp-alarm@2400 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400>; - interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; - io-channels = <&pm8994_vadc VADC_DIE_TEMP>; - io-channel-names = "thermal"; - #thermal-sensor-cells = <0>; - }; - - pm8994_vadc: adc@3100 { - compatible = "qcom,spmi-vadc"; - reg = <0x3100>; - interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - #io-channel-cells = <1>; - - channel@7 { - reg = ; - qcom,pre-scaling = <1 3>; - label = "vph_pwr"; - }; - channel@8 { - reg = ; - label = "die_temp"; - }; - channel@9 { - reg = ; - label = "ref_625mv"; - }; - channel@a { - reg = ; - label = "ref_1250mv"; - }; - channel@e { - reg = ; - }; - channel@f { - reg = ; - }; - }; - - pm8994_gpios: gpio@c000 { - compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8994_gpios 0 0 22>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pm8994_mpps: mpps@a000 { - compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp"; - reg = <0xa000>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8994_mpps 0 0 8>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pmic@1 { - compatible = "qcom,pm8994", "qcom,spmi-pmic"; - reg = <0x1 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8994_lpg: pwm { - compatible = "qcom,pm8994-lpg"; - - #address-cells = <1>; - #size-cells = <0>; - #pwm-cells = <2>; - - status = "disabled"; - }; - - pm8994_spmi_regulators: regulators { - compatible = "qcom,pm8994-regulators"; - }; - }; -}; diff --git a/arch/arm/dts/pm8998.dtsi b/arch/arm/dts/pm8998.dtsi deleted file mode 100644 index 3f82715392c6..000000000000 --- a/arch/arm/dts/pm8998.dtsi +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* Copyright 2018 Google LLC. */ - -#include -#include -#include -#include -#include - -/ { - thermal-zones { - pm8998-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&pm8998_temp>; - - trips { - pm8998_alert0: pm8998-alert0 { - temperature = <105000>; - hysteresis = <2000>; - type = "passive"; - }; - pm8998_crit: pm8998-crit { - temperature = <125000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; -}; - -&spmi_bus { - pm8998_lsid0: pmic@0 { - compatible = "qcom,pm8998", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8998_pon: pon@800 { - compatible = "qcom,pm8998-pon"; - - reg = <0x800>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pm8998_pwrkey: pwrkey { - compatible = "qcom,pm8941-pwrkey"; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; - - pm8998_resin: resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - status = "disabled"; - }; - }; - - pm8998_temp: temp-alarm@2400 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400>; - interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; - io-channels = <&pm8998_adc ADC5_DIE_TEMP>; - io-channel-names = "thermal"; - #thermal-sensor-cells = <0>; - }; - - pm8998_coincell: charger@2800 { - compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell"; - reg = <0x2800>; - - status = "disabled"; - }; - - pm8998_adc: adc@3100 { - compatible = "qcom,spmi-adc-rev2"; - reg = <0x3100>; - interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - #io-channel-cells = <1>; - - channel@6 { - reg = ; - label = "die_temp"; - }; - }; - - pm8998_adc_tm: adc-tm@3400 { - compatible = "qcom,spmi-adc-tm-hc"; - reg = <0x3400>; - interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; - #thermal-sensor-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - rtc@6000 { - compatible = "qcom,pm8941-rtc"; - reg = <0x6000>, <0x6100>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; - }; - - pm8998_gpios: gpio@c000 { - compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8998_gpios 0 0 26>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - }; - - pm8998_lsid1: pmic@1 { - compatible = "qcom,pm8998", "qcom,spmi-pmic"; - reg = <0x1 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - }; -}; diff --git a/arch/arm/dts/pmi8994.dtsi b/arch/arm/dts/pmi8994.dtsi deleted file mode 100644 index 36d6a1fb553a..000000000000 --- a/arch/arm/dts/pmi8994.dtsi +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include - -&spmi_bus { - - pmic@2 { - compatible = "qcom,pmi8994", "qcom,spmi-pmic"; - reg = <0x2 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmi8994_gpios: gpio@c000 { - compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pmi8994_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pmi8994_mpps: mpps@a000 { - compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp"; - reg = <0xa000>; - gpio-controller; - gpio-ranges = <&pmi8994_mpps 0 0 4>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pmic@3 { - compatible = "qcom,pmi8994", "qcom,spmi-pmic"; - reg = <0x3 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmi8994_lpg: pwm { - compatible = "qcom,pmi8994-lpg"; - - #address-cells = <1>; - #size-cells = <0>; - #pwm-cells = <2>; - - status = "disabled"; - }; - - pmi8994_spmi_regulators: regulators { - compatible = "qcom,pmi8994-regulators"; - }; - - pmi8994_wled: wled@d800 { - compatible = "qcom,pmi8994-wled"; - reg = <0xd800>, <0xd900>; - interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, - <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ovp", "short"; - qcom,cabc; - qcom,external-pfet; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/pmi8998.dtsi b/arch/arm/dts/pmi8998.dtsi deleted file mode 100644 index cd3f0790fd42..000000000000 --- a/arch/arm/dts/pmi8998.dtsi +++ /dev/null @@ -1,98 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include - -&spmi_bus { - pmi8998_lsid0: pmic@2 { - compatible = "qcom,pmi8998", "qcom,spmi-pmic"; - reg = <0x2 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmi8998_charger: charger@1000 { - compatible = "qcom,pmi8998-charger"; - reg = <0x1000>; - - interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, - <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, - <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, - <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "usb-plugin", - "bat-ov", - "wdog-bark", - "usbin-icl-change"; - - io-channels = <&pmi8998_rradc 3>, - <&pmi8998_rradc 4>; - io-channel-names = "usbin_i", "usbin_v"; - - status = "disabled"; - }; - - pmi8998_gpios: gpio@c000 { - compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pmi8998_gpios 0 0 14>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pmi8998_rradc: adc@4500 { - compatible = "qcom,pmi8998-rradc"; - reg = <0x4500>; - #io-channel-cells = <1>; - }; - }; - - pmi8998_lsid1: pmic@3 { - compatible = "qcom,pmi8998", "qcom,spmi-pmic"; - reg = <0x3 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - labibb { - compatible = "qcom,pmi8998-lab-ibb"; - - ibb: ibb { - interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, - <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "sc-err", "ocp"; - }; - - lab: lab { - interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, - <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "sc-err", "ocp"; - }; - }; - - pmi8998_lpg: pwm { - compatible = "qcom,pmi8998-lpg"; - - #address-cells = <1>; - #size-cells = <0>; - #pwm-cells = <2>; - - status = "disabled"; - }; - - pmi8998_flash: led-controller@d300 { - compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led"; - reg = <0xd300>; - status = "disabled"; - }; - - pmi8998_wled: leds@d800 { - compatible = "qcom,pmi8998-wled"; - reg = <0xd800>, <0xd900>; - interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, - <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ovp", "short"; - label = "backlight"; - - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/pms405.dtsi b/arch/arm/dts/pms405.dtsi deleted file mode 100644 index 461ad97032f7..000000000000 --- a/arch/arm/dts/pms405.dtsi +++ /dev/null @@ -1,149 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2018, Linaro Limited - */ - -#include -#include -#include -#include - -/ { - thermal-zones { - pms405-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&pms405_temp>; - - trips { - pms405_alert0: pms405-alert0 { - temperature = <105000>; - hysteresis = <2000>; - type = "passive"; - }; - pms405_crit: pms405-crit { - temperature = <125000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; -}; - -&spmi_bus { - pms405_0: pms405@0 { - compatible = "qcom,pms405", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pms405_gpios: gpio@c000 { - compatible = "qcom,pms405-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pms405_gpios 0 0 12>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pon@800 { - compatible = "qcom,pms405-pon"; - reg = <0x0800>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pwrkey { - compatible = "qcom,pm8941-pwrkey"; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; - }; - - pms405_temp: temp-alarm@2400 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400>; - interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; - io-channels = <&pms405_adc ADC5_DIE_TEMP>; - io-channel-names = "thermal"; - #thermal-sensor-cells = <0>; - }; - - pms405_adc: adc@3100 { - compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2"; - reg = <0x3100>; - interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - #io-channel-cells = <1>; - - channel@0 { - reg = ; - qcom,pre-scaling = <1 1>; - label = "ref_gnd"; - }; - - channel@1 { - reg = ; - qcom,pre-scaling = <1 1>; - label = "vref_1p25"; - }; - - channel@131 { - reg = ; - qcom,pre-scaling = <1 3>; - label = "vph_pwr"; - }; - - channel@6 { - reg = ; - qcom,pre-scaling = <1 1>; - label = "die_temp"; - }; - - channel@77 { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "pa_therm1"; - }; - - channel@79 { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "pa_therm3"; - }; - - channel@76 { - reg = ; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,pre-scaling = <1 1>; - label = "xo_therm"; - }; - }; - - rtc@6000 { - compatible = "qcom,pm8941-rtc"; - reg = <0x6000>, <0x6100>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; - }; - }; - - pms405_1: pms405@1 { - compatible = "qcom,pms405", "qcom,spmi-pmic"; - reg = <0x1 SPMI_USID>; - - pms405_spmi_regulators: regulators { - compatible = "qcom,pms405-regulators"; - }; - }; -}; diff --git a/arch/arm/dts/qcs404-evb-4000.dts b/arch/arm/dts/qcs404-evb-4000.dts deleted file mode 100644 index 358827c2fbd3..000000000000 --- a/arch/arm/dts/qcs404-evb-4000.dts +++ /dev/null @@ -1,96 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2018, Linaro Limited - */ - -/dts-v1/; - -#include -#include "qcs404-evb.dtsi" - -/ { - model = "Qualcomm Technologies, Inc. QCS404 EVB 4000"; - compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb", - "qcom,qcs404"; -}; - -ðernet { - status = "okay"; - - snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 10000>; - - pinctrl-names = "default"; - pinctrl-0 = <ðernet_defaults>; - - phy-handle = <&phy1>; - phy-mode = "rgmii"; - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy1: phy@4 { - compatible = "ethernet-phy-ieee802.3-c22"; - device_type = "ethernet-phy"; - reg = <0x4>; - }; - }; -}; - -&tlmm { - ethernet_defaults: ethernet-defaults-state { - int-pins { - pins = "gpio61"; - function = "rgmii_int"; - bias-disable; - drive-strength = <2>; - }; - mdc-pins { - pins = "gpio76"; - function = "rgmii_mdc"; - bias-pull-up; - }; - mdio-pins { - pins = "gpio75"; - function = "rgmii_mdio"; - bias-pull-up; - }; - tx-pins { - pins = "gpio67", "gpio66", "gpio65", "gpio64"; - function = "rgmii_tx"; - bias-pull-up; - drive-strength = <16>; - }; - rx-pins { - pins = "gpio73", "gpio72", "gpio71", "gpio70"; - function = "rgmii_rx"; - bias-disable; - drive-strength = <2>; - }; - tx-ctl-pins { - pins = "gpio68"; - function = "rgmii_ctl"; - bias-pull-up; - drive-strength = <16>; - }; - rx-ctl-pins { - pins = "gpio74"; - function = "rgmii_ctl"; - bias-disable; - drive-strength = <2>; - }; - tx-ck-pins { - pins = "gpio63"; - function = "rgmii_ck"; - bias-pull-up; - drive-strength = <16>; - }; - rx-ck-pins { - pins = "gpio69"; - function = "rgmii_ck"; - bias-disable; - drive-strength = <2>; - }; - }; -}; diff --git a/arch/arm/dts/qcs404-evb.dtsi b/arch/arm/dts/qcs404-evb.dtsi deleted file mode 100644 index 10655401528e..000000000000 --- a/arch/arm/dts/qcs404-evb.dtsi +++ /dev/null @@ -1,389 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2018, Linaro Limited - */ - -#include -#include "qcs404.dtsi" -#include "pms405.dtsi" -#include -#include - -/ { - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp1_uart3; - }; - - chosen { - stdout-path = "serial0"; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - }; - - vdd_ch0_3p3: - vdd_esmps3_3p3: vdd-esmps3-3p3-regulator { - compatible = "regulator-fixed"; - regulator-name = "eSMPS3_3P3"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - usb3_vbus_reg: regulator-usb3-vbus { - compatible = "regulator-fixed"; - regulator-name = "VBUS_BOOST_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_vbus_boost_pin>; - vin-supply = <&vph_pwr>; - enable-active-high; - - /* TODO: Drop this when introducing role switching */ - regulator-always-on; - }; -}; - -&blsp1_uart3 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - vddio-supply = <&vreg_l6_1p8>; - vddxo-supply = <&vreg_l5_1p8>; - vddrf-supply = <&vreg_l1_1p3>; - vddch0-supply = <&vdd_ch0_3p3>; - - local-bd-address = [ 02 00 00 00 5a ad ]; - - max-speed = <3200000>; - }; -}; - -&blsp1_dma { - qcom,controlled-remotely; -}; - -&blsp2_dma { - qcom,controlled-remotely; -}; - -&gcc { - protected-clocks = , - , - , - , - <141>, /* GCC_WCSS_Q6_AHB_CLK */ - <142>; /* GCC_WCSS_Q6_AXIM_CLK */ -}; - -&pms405_spmi_regulators { - vdd_s3-supply = <&vph_pwr>; - - pms405_s3: s3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vdd_apc"; - regulator-initial-mode = <1>; - regulator-min-microvolt = <1048000>; - regulator-max-microvolt = <1384000>; - }; -}; - -&pcie { - status = "okay"; - - perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&perst_state>; -}; - -&pcie_phy { - status = "okay"; - - vdda-vp-supply = <&vreg_l3_1p05>; - vdda-vph-supply = <&vreg_l5_1p8>; -}; - -&remoteproc_adsp { - status = "okay"; -}; - -&remoteproc_cdsp { - status = "okay"; -}; - -&remoteproc_wcss { - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-pms405-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_l1_l2-supply = <&vreg_s5_1p35>; - vdd_l3_l8-supply = <&vreg_s5_1p35>; - vdd_l4-supply = <&vreg_s5_1p35>; - vdd_l5_l6-supply = <&vreg_s4_1p8>; - vdd_l7-supply = <&vph_pwr>; - vdd_l9-supply = <&vreg_s5_1p35>; - vdd_l10_l11_l12_l13-supply = <&vph_pwr>; - - vreg_s4_1p8: s4 { - regulator-min-microvolt = <1728000>; - regulator-max-microvolt = <1920000>; - }; - - vreg_s5_1p35: s5 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - - vreg_l1_1p3: l1 { - regulator-min-microvolt = <1240000>; - regulator-max-microvolt = <1352000>; - }; - - vreg_l2_1p275: l2 { - regulator-min-microvolt = <1048000>; - regulator-max-microvolt = <1280000>; - }; - - vreg_l3_1p05: l3 { - regulator-min-microvolt = <1048000>; - regulator-max-microvolt = <1160000>; - }; - - vreg_l4_1p2: l4 { - regulator-min-microvolt = <1144000>; - regulator-max-microvolt = <1256000>; - }; - - vreg_l5_1p8: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_l6_1p8: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vreg_l7_1p8: l7 { - regulator-min-microvolt = <1616000>; - regulator-max-microvolt = <3000000>; - }; - - vreg_l8_1p2: l8 { - regulator-min-microvolt = <1136000>; - regulator-max-microvolt = <1352000>; - }; - - vreg_l10_3p3: l10 { - regulator-min-microvolt = <2936000>; - regulator-max-microvolt = <3088000>; - }; - - vreg_l11_sdc2: l11 { - regulator-min-microvolt = <2696000>; - regulator-max-microvolt = <3304000>; - }; - - vreg_l12_3p3: l12 { - regulator-min-microvolt = <3050000>; - regulator-max-microvolt = <3300000>; - }; - - vreg_l13_3p3: l13 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - }; -}; - -&sdcc1 { - status = "okay"; - - supports-cqe; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - bus-width = <8>; - non-removable; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_on>; - pinctrl-1 = <&sdc1_off>; -}; - -&tlmm { - perst_state: perst-state { - pins = "gpio43"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - output-low; - }; - - sdc1_on: sdc1-on-state { - clk-pins { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd-pins { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data-pins { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <10>; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc1_off: sdc1-off-state { - clk-pins { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; - - cmd-pins { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - data-pins { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - usb3_id_pin: usb3-id-state { - pins = "gpio116"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; -}; - -&pms405_gpios { - usb_vbus_boost_pin: usb-vbus-boost-state { - pinconf { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <1>; - }; - }; - usb3_vbus_pin: usb3-vbus-state { - pinconf { - pins = "gpio12"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - power-source = <1>; - }; - }; -}; - -&usb2 { - status = "okay"; -}; - -&usb2_phy_sec { - vdd-supply = <&vreg_l4_1p2>; - vdda1p8-supply = <&vreg_l5_1p8>; - vdda3p3-supply = <&vreg_l12_3p3>; - status = "okay"; -}; - -&usb3 { - status = "okay"; - -}; - -&usb3_dwc3 { - dr_mode = "host"; -}; - -&usb2_phy_prim { - vdd-supply = <&vreg_l4_1p2>; - vdda1p8-supply = <&vreg_l5_1p8>; - vdda3p3-supply = <&vreg_l12_3p3>; - status = "okay"; -}; - -&usb3_phy { - vdd-supply = <&vreg_l3_1p05>; - vdda1p8-supply = <&vreg_l5_1p8>; - status = "okay"; -}; - -&wifi { - status = "okay"; - vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>; - vdd-1.8-xo-supply = <&vreg_l5_1p8>; - vdd-1.3-rfa-supply = <&vreg_l1_1p3>; -}; - -/* PINCTRL - additions to nodes defined in qcs404.dtsi */ - -&blsp1_uart2_default { - rx-pins { - drive-strength = <2>; - bias-disable; - }; - - tx-pins { - drive-strength = <2>; - bias-disable; - }; -}; - -&blsp1_uart3_default { - cts-pins { - bias-disable; - }; - - rts-tx-pins { - drive-strength = <2>; - bias-disable; - }; - - rx-pins { - bias-pull-up; - }; -}; diff --git a/arch/arm/dts/qcs404.dtsi b/arch/arm/dts/qcs404.dtsi deleted file mode 100644 index 2721f32dfb71..000000000000 --- a/arch/arm/dts/qcs404.dtsi +++ /dev/null @@ -1,1829 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2018, Linaro Limited - */ - -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - CPU0: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x100>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - next-level-cache = <&L2_0>; - #cooling-cells = <2>; - clocks = <&apcs_glb>; - operating-points-v2 = <&cpu_opp_table>; - power-domains = <&cpr>; - power-domain-names = "cpr"; - }; - - CPU1: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x101>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - next-level-cache = <&L2_0>; - #cooling-cells = <2>; - clocks = <&apcs_glb>; - operating-points-v2 = <&cpu_opp_table>; - power-domains = <&cpr>; - power-domain-names = "cpr"; - }; - - CPU2: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x102>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - next-level-cache = <&L2_0>; - #cooling-cells = <2>; - clocks = <&apcs_glb>; - operating-points-v2 = <&cpu_opp_table>; - power-domains = <&cpr>; - power-domain-names = "cpr"; - }; - - CPU3: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x103>; - enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; - next-level-cache = <&L2_0>; - #cooling-cells = <2>; - clocks = <&apcs_glb>; - operating-points-v2 = <&cpu_opp_table>; - power-domains = <&cpr>; - power-domain-names = "cpr"; - }; - - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - - idle-states { - entry-method = "psci"; - - CPU_SLEEP_0: cpu-sleep-0 { - compatible = "arm,idle-state"; - idle-state-name = "standalone-power-collapse"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <125>; - exit-latency-us = <180>; - min-residency-us = <595>; - local-timer-stop; - }; - }; - }; - - cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2-kryo-cpu"; - opp-shared; - - opp-1094400000 { - opp-hz = /bits/ 64 <1094400000>; - required-opps = <&cpr_opp1>; - }; - opp-1248000000 { - opp-hz = /bits/ 64 <1248000000>; - required-opps = <&cpr_opp2>; - }; - opp-1401600000 { - opp-hz = /bits/ 64 <1401600000>; - required-opps = <&cpr_opp3>; - }; - }; - - cpr_opp_table: opp-table-cpr { - compatible = "operating-points-v2-qcom-level"; - - cpr_opp1: opp1 { - opp-level = <1>; - qcom,opp-fuse-level = <1>; - }; - cpr_opp2: opp2 { - opp-level = <2>; - qcom,opp-fuse-level = <2>; - }; - cpr_opp3: opp3 { - opp-level = <3>; - qcom,opp-fuse-level = <3>; - }; - }; - - firmware { - scm: scm { - compatible = "qcom,scm-qcs404", "qcom,scm"; - #reset-cells = <1>; - }; - }; - - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - rpm: remoteproc { - compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc"; - - glink-edge { - compatible = "qcom,glink-rpm"; - - interrupts = ; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - mboxes = <&apcs_glb 0>; - - rpm_requests: rpm-requests { - compatible = "qcom,rpm-qcs404"; - qcom,glink-channels = "rpm_requests"; - - rpmcc: clock-controller { - compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc"; - #clock-cells = <1>; - clocks = <&xo_board>; - clock-names = "xo"; - }; - - rpmpd: power-controller { - compatible = "qcom,qcs404-rpmpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmpd_opp_table>; - - rpmpd_opp_table: opp-table { - compatible = "operating-points-v2"; - - rpmpd_opp_ret: opp1 { - opp-level = <16>; - }; - - rpmpd_opp_ret_plus: opp2 { - opp-level = <32>; - }; - - rpmpd_opp_min_svs: opp3 { - opp-level = <48>; - }; - - rpmpd_opp_low_svs: opp4 { - opp-level = <64>; - }; - - rpmpd_opp_svs: opp5 { - opp-level = <128>; - }; - - rpmpd_opp_svs_plus: opp6 { - opp-level = <192>; - }; - - rpmpd_opp_nom: opp7 { - opp-level = <256>; - }; - - rpmpd_opp_nom_plus: opp8 { - opp-level = <320>; - }; - - rpmpd_opp_turbo: opp9 { - opp-level = <384>; - }; - - rpmpd_opp_turbo_no_cpr: opp10 { - opp-level = <416>; - }; - - rpmpd_opp_turbo_plus: opp11 { - opp-level = <512>; - }; - }; - }; - }; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - tz_apps_mem: memory@85900000 { - reg = <0 0x85900000 0 0x500000>; - no-map; - }; - - xbl_mem: memory@85e00000 { - reg = <0 0x85e00000 0 0x100000>; - no-map; - }; - - smem_region: memory@85f00000 { - reg = <0 0x85f00000 0 0x200000>; - no-map; - }; - - tz_mem: memory@86100000 { - reg = <0 0x86100000 0 0x300000>; - no-map; - }; - - wlan_fw_mem: memory@86400000 { - reg = <0 0x86400000 0 0x1100000>; - no-map; - }; - - adsp_fw_mem: memory@87500000 { - reg = <0 0x87500000 0 0x1a00000>; - no-map; - }; - - cdsp_fw_mem: memory@88f00000 { - reg = <0 0x88f00000 0 0x600000>; - no-map; - }; - - wlan_msa_mem: memory@89500000 { - reg = <0 0x89500000 0 0x100000>; - no-map; - }; - - uefi_mem: memory@9f800000 { - reg = <0 0x9f800000 0 0x800000>; - no-map; - }; - }; - - smem { - compatible = "qcom,smem"; - - memory-region = <&smem_region>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - - hwlocks = <&tcsr_mutex 3>; - }; - - soc: soc@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - compatible = "simple-bus"; - - turingcc: clock-controller@800000 { - compatible = "qcom,qcs404-turingcc"; - reg = <0x00800000 0x30000>; - clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; - - #clock-cells = <1>; - #reset-cells = <1>; - - status = "disabled"; - }; - - rpm_msg_ram: sram@60000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0x00060000 0x6000>; - }; - - usb3_phy: phy@78000 { - compatible = "qcom,usb-ss-28nm-phy"; - reg = <0x00078000 0x400>; - #phy-cells = <0>; - clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, - <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, - <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "ref", "ahb", "pipe"; - resets = <&gcc GCC_USB3_PHY_BCR>, - <&gcc GCC_USB3PHY_PHY_BCR>; - reset-names = "com", "phy"; - status = "disabled"; - }; - - usb2_phy_prim: phy@7a000 { - compatible = "qcom,usb-hs-28nm-femtophy"; - reg = <0x0007a000 0x200>; - #phy-cells = <0>; - clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, - <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, - <&gcc GCC_USB2A_PHY_SLEEP_CLK>; - clock-names = "ref", "ahb", "sleep"; - resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, - <&gcc GCC_USB2A_PHY_BCR>; - reset-names = "phy", "por"; - status = "disabled"; - }; - - usb2_phy_sec: phy@7c000 { - compatible = "qcom,usb-hs-28nm-femtophy"; - reg = <0x0007c000 0x200>; - #phy-cells = <0>; - clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, - <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, - <&gcc GCC_USB2A_PHY_SLEEP_CLK>; - clock-names = "ref", "ahb", "sleep"; - resets = <&gcc GCC_QUSB2_PHY_BCR>, - <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; - reset-names = "phy", "por"; - status = "disabled"; - }; - - qfprom: qfprom@a4000 { - compatible = "qcom,qcs404-qfprom", "qcom,qfprom"; - reg = <0x000a4000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - cpr_efuse_speedbin: speedbin@13c { - reg = <0x13c 0x4>; - bits = <2 3>; - }; - - tsens_s0_p1: s0-p1@1f8 { - reg = <0x1f8 0x1>; - bits = <0 6>; - }; - - tsens_s0_p2: s0-p2@1f8 { - reg = <0x1f8 0x2>; - bits = <6 6>; - }; - - tsens_s1_p1: s1-p1@1f9 { - reg = <0x1f9 0x2>; - bits = <4 6>; - }; - - tsens_s1_p2: s1-p2@1fa { - reg = <0x1fa 0x1>; - bits = <2 6>; - }; - - tsens_s2_p1: s2-p1@1fb { - reg = <0x1fb 0x1>; - bits = <0 6>; - }; - - tsens_s2_p2: s2-p2@1fb { - reg = <0x1fb 0x2>; - bits = <6 6>; - }; - - tsens_s3_p1: s3-p1@1fc { - reg = <0x1fc 0x2>; - bits = <4 6>; - }; - - tsens_s3_p2: s3-p2@1fd { - reg = <0x1fd 0x1>; - bits = <2 6>; - }; - - tsens_s4_p1: s4-p1@1fe { - reg = <0x1fe 0x1>; - bits = <0 6>; - }; - - tsens_s4_p2: s4-p2@1fe { - reg = <0x1fe 0x2>; - bits = <6 6>; - }; - - tsens_s5_p1: s5-p1@200 { - reg = <0x200 0x1>; - bits = <0 6>; - }; - - tsens_s5_p2: s5-p2@200 { - reg = <0x200 0x2>; - bits = <6 6>; - }; - - tsens_s6_p1: s6-p1@201 { - reg = <0x201 0x2>; - bits = <4 6>; - }; - - tsens_s6_p2: s6-p2@202 { - reg = <0x202 0x1>; - bits = <2 6>; - }; - - tsens_s7_p1: s7-p1@203 { - reg = <0x203 0x1>; - bits = <0 6>; - }; - - tsens_s7_p2: s7-p2@203 { - reg = <0x203 0x2>; - bits = <6 6>; - }; - - tsens_s8_p1: s8-p1@204 { - reg = <0x204 0x2>; - bits = <4 6>; - }; - - tsens_s8_p2: s8-p2@205 { - reg = <0x205 0x1>; - bits = <2 6>; - }; - - tsens_s9_p1: s9-p1@206 { - reg = <0x206 0x1>; - bits = <0 6>; - }; - - tsens_s9_p2: s9-p2@206 { - reg = <0x206 0x2>; - bits = <6 6>; - }; - - tsens_mode: mode@208 { - reg = <0x208 1>; - bits = <0 3>; - }; - - tsens_base1: base1@208 { - reg = <0x208 2>; - bits = <3 8>; - }; - - tsens_base2: base2@208 { - reg = <0x209 2>; - bits = <3 8>; - }; - - cpr_efuse_quot_offset1: qoffset1@231 { - reg = <0x231 0x4>; - bits = <4 7>; - }; - cpr_efuse_quot_offset2: qoffset2@232 { - reg = <0x232 0x4>; - bits = <3 7>; - }; - cpr_efuse_quot_offset3: qoffset3@233 { - reg = <0x233 0x4>; - bits = <2 7>; - }; - cpr_efuse_init_voltage1: ivoltage1@229 { - reg = <0x229 0x4>; - bits = <4 6>; - }; - cpr_efuse_init_voltage2: ivoltage2@22a { - reg = <0x22a 0x4>; - bits = <2 6>; - }; - cpr_efuse_init_voltage3: ivoltage3@22b { - reg = <0x22b 0x4>; - bits = <0 6>; - }; - cpr_efuse_quot1: quot1@22b { - reg = <0x22b 0x4>; - bits = <6 12>; - }; - cpr_efuse_quot2: quot2@22d { - reg = <0x22d 0x4>; - bits = <2 12>; - }; - cpr_efuse_quot3: quot3@230 { - reg = <0x230 0x4>; - bits = <0 12>; - }; - cpr_efuse_ring1: ring1@228 { - reg = <0x228 0x4>; - bits = <0 3>; - }; - cpr_efuse_ring2: ring2@228 { - reg = <0x228 0x4>; - bits = <4 3>; - }; - cpr_efuse_ring3: ring3@229 { - reg = <0x229 0x4>; - bits = <0 3>; - }; - cpr_efuse_revision: revision@218 { - reg = <0x218 0x4>; - bits = <3 3>; - }; - }; - - rng: rng@e3000 { - compatible = "qcom,prng-ee"; - reg = <0x000e3000 0x1000>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; - clock-names = "core"; - }; - - bimc: interconnect@400000 { - reg = <0x00400000 0x80000>; - compatible = "qcom,qcs404-bimc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - - tsens: thermal-sensor@4a9000 { - compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; - reg = <0x004a9000 0x1000>, /* TM */ - <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_mode>, - <&tsens_base1>, <&tsens_base2>, - <&tsens_s0_p1>, <&tsens_s0_p2>, - <&tsens_s1_p1>, <&tsens_s1_p2>, - <&tsens_s2_p1>, <&tsens_s2_p2>, - <&tsens_s3_p1>, <&tsens_s3_p2>, - <&tsens_s4_p1>, <&tsens_s4_p2>, - <&tsens_s5_p1>, <&tsens_s5_p2>, - <&tsens_s6_p1>, <&tsens_s6_p2>, - <&tsens_s7_p1>, <&tsens_s7_p2>, - <&tsens_s8_p1>, <&tsens_s8_p2>, - <&tsens_s9_p1>, <&tsens_s9_p2>; - nvmem-cell-names = "mode", - "base1", "base2", - "s0_p1", "s0_p2", - "s1_p1", "s1_p2", - "s2_p1", "s2_p2", - "s3_p1", "s3_p2", - "s4_p1", "s4_p2", - "s5_p1", "s5_p2", - "s6_p1", "s6_p2", - "s7_p1", "s7_p2", - "s8_p1", "s8_p2", - "s9_p1", "s9_p2"; - #qcom,sensors = <10>; - interrupts = ; - interrupt-names = "uplow"; - #thermal-sensor-cells = <1>; - }; - - pcnoc: interconnect@500000 { - reg = <0x00500000 0x15080>; - compatible = "qcom,qcs404-pcnoc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_PNOC_CLK>, - <&rpmcc RPM_SMD_PNOC_A_CLK>; - }; - - snoc: interconnect@580000 { - reg = <0x00580000 0x23080>; - compatible = "qcom,qcs404-snoc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; - }; - - remoteproc_cdsp: remoteproc@b00000 { - compatible = "qcom,qcs404-cdsp-pas"; - reg = <0x00b00000 0x4040>; - - interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - /* - * If the node was using the PIL binding, then include properties: - * clocks = <&xo_board>, - * <&gcc GCC_CDSP_CFG_AHB_CLK>, - * <&gcc GCC_CDSP_TBU_CLK>, - * <&gcc GCC_BIMC_CDSP_CLK>, - * <&turingcc TURING_WRAPPER_AON_CLK>, - * <&turingcc TURING_Q6SS_AHBS_AON_CLK>, - * <&turingcc TURING_Q6SS_AHBM_AON_CLK>, - * <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; - * clock-names = "xo", - * "sway", - * "tbu", - * "bimc", - * "ahb_aon", - * "q6ss_slave", - * "q6ss_master", - * "q6_axim"; - * resets = <&gcc GCC_CDSP_RESTART>; - * reset-names = "restart"; - * qcom,halt-regs = <&tcsr 0x19004>; - */ - - memory-region = <&cdsp_fw_mem>; - - qcom,smem-states = <&cdsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - - qcom,remote-pid = <5>; - mboxes = <&apcs_glb 12>; - - label = "cdsp"; - }; - }; - - usb3: usb@7678800 { - compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; - reg = <0x07678800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&gcc GCC_USB30_MASTER_CLK>, - <&gcc GCC_SYS_NOC_USB3_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>; - clock-names = "core", "iface", "sleep", "mock_utmi"; - assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - status = "disabled"; - - usb3_dwc3: usb@7580000 { - compatible = "snps,dwc3"; - reg = <0x07580000 0xcd00>; - interrupts = ; - phys = <&usb2_phy_prim>, <&usb3_phy>; - phy-names = "usb2-phy", "usb3-phy"; - snps,has-lpm-erratum; - snps,hird-threshold = /bits/ 8 <0x10>; - snps,usb3_lpm_capable; - dr_mode = "otg"; - }; - }; - - usb2: usb@79b8800 { - compatible = "qcom,qcs404-dwc3", "qcom,dwc3"; - reg = <0x079b8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>, - <&gcc GCC_PCNOC_USB2_CLK>, - <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>, - <&gcc GCC_USB20_MOCK_UTMI_CLK>; - clock-names = "core", "iface", "sleep", "mock_utmi"; - assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, - <&gcc GCC_USB_HS_SYSTEM_CLK>; - assigned-clock-rates = <19200000>, <133333333>; - status = "disabled"; - - usb@78c0000 { - compatible = "snps,dwc3"; - reg = <0x078c0000 0xcc00>; - interrupts = ; - phys = <&usb2_phy_sec>; - phy-names = "usb2-phy"; - snps,has-lpm-erratum; - snps,hird-threshold = /bits/ 8 <0x10>; - snps,usb3_lpm_capable; - dr_mode = "peripheral"; - }; - }; - - tlmm: pinctrl@1000000 { - compatible = "qcom,qcs404-pinctrl"; - reg = <0x01000000 0x200000>, - <0x01300000 0x200000>, - <0x07b00000 0x200000>; - reg-names = "south", "north", "east"; - interrupts = ; - gpio-ranges = <&tlmm 0 0 120>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_i2c0_default: blsp1-i2c0-default-state { - pins = "gpio32", "gpio33"; - function = "blsp_i2c0"; - }; - - blsp1_i2c1_default: blsp1-i2c1-default-state { - pins = "gpio24", "gpio25"; - function = "blsp_i2c1"; - }; - - blsp1_i2c2_default: blsp1-i2c2-default-state { - sda-pins { - pins = "gpio19"; - function = "blsp_i2c_sda_a2"; - }; - - scl-pins { - pins = "gpio20"; - function = "blsp_i2c_scl_a2"; - }; - }; - - blsp1_i2c3_default: blsp1-i2c3-default-state { - pins = "gpio84", "gpio85"; - function = "blsp_i2c3"; - }; - - blsp1_i2c4_default: blsp1-i2c4-default-state { - pins = "gpio117", "gpio118"; - function = "blsp_i2c4"; - }; - - blsp1_uart0_default: blsp1-uart0-default-state { - pins = "gpio30", "gpio31", "gpio32", "gpio33"; - function = "blsp_uart0"; - }; - - blsp1_uart1_default: blsp1-uart1-default-state { - pins = "gpio22", "gpio23"; - function = "blsp_uart1"; - }; - - blsp1_uart2_default: blsp1-uart2-default-state { - rx-pins { - pins = "gpio18"; - function = "blsp_uart_rx_a2"; - }; - - tx-pins { - pins = "gpio17"; - function = "blsp_uart_tx_a2"; - }; - }; - - blsp1_uart3_default: blsp1-uart3-default-state { - cts-pins { - pins = "gpio84"; - function = "blsp_uart3"; - }; - - rts-tx-pins { - pins = "gpio85", "gpio82"; - function = "blsp_uart3"; - }; - - rx-pins { - pins = "gpio83"; - function = "blsp_uart3"; - }; - }; - - blsp2_i2c0_default: blsp2-i2c0-default-state { - pins = "gpio28", "gpio29"; - function = "blsp_i2c5"; - }; - - blsp1_spi0_default: blsp1-spi0-default-state { - pins = "gpio30", "gpio31", "gpio32", "gpio33"; - function = "blsp_spi0"; - }; - - blsp1_spi1_default: blsp1-spi1-default-state { - mosi-pins { - pins = "gpio22"; - function = "blsp_spi_mosi_a1"; - }; - - miso-pins { - pins = "gpio23"; - function = "blsp_spi_miso_a1"; - }; - - cs-n-pins { - pins = "gpio24"; - function = "blsp_spi_cs_n_a1"; - }; - - clk-pins { - pins = "gpio25"; - function = "blsp_spi_clk_a1"; - }; - }; - - blsp1_spi2_default: blsp1-spi2-default-state { - pins = "gpio17", "gpio18", "gpio19", "gpio20"; - function = "blsp_spi2"; - }; - - blsp1_spi3_default: blsp1-spi3-default-state { - pins = "gpio82", "gpio83", "gpio84", "gpio85"; - function = "blsp_spi3"; - }; - - blsp1_spi4_default: blsp1-spi4-default-state { - pins = "gpio37", "gpio38", "gpio117", "gpio118"; - function = "blsp_spi4"; - }; - - blsp2_spi0_default: blsp2-spi0-default-state { - pins = "gpio26", "gpio27", "gpio28", "gpio29"; - function = "blsp_spi5"; - }; - - blsp2_uart0_default: blsp2-uart0-default-state { - pins = "gpio26", "gpio27", "gpio28", "gpio29"; - function = "blsp_uart5"; - }; - }; - - gcc: clock-controller@1800000 { - compatible = "qcom,gcc-qcs404"; - reg = <0x01800000 0x80000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - - clocks = <&xo_board>, - <&sleep_clk>, - <&pcie_phy>, - <0>, - <0>, - <0>; - - assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; - assigned-clock-rates = <19200000>; - }; - - tcsr_mutex: hwlock@1905000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x01905000 0x20000>; - #hwlock-cells = <1>; - }; - - tcsr: syscon@1937000 { - compatible = "qcom,qcs404-tcsr", "syscon"; - reg = <0x01937000 0x25000>; - }; - - sram@290000 { - compatible = "qcom,rpm-stats"; - reg = <0x00290000 0x10000>; - }; - - spmi_bus: spmi@200f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0200f000 0x001000>, - <0x02400000 0x800000>, - <0x02c00000 0x800000>, - <0x03800000 0x200000>, - <0x0200a000 0x002100>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = ; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - remoteproc_wcss: remoteproc@7400000 { - compatible = "qcom,qcs404-wcss-pas"; - reg = <0x07400000 0x4040>; - - interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&wlan_fw_mem>; - - qcom,smem-states = <&wcss_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - - qcom,remote-pid = <1>; - mboxes = <&apcs_glb 16>; - - label = "wcss"; - }; - }; - - pcie_phy: phy@7786000 { - compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; - reg = <0x07786000 0xb8>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, - <&gcc GCC_PCIE_0_PIPE_ARES>; - reset-names = "phy", "pipe"; - - clock-output-names = "pcie_0_pipe_clk"; - #clock-cells = <0>; - #phy-cells = <0>; - - status = "disabled"; - }; - - sdcc1: mmc@7804000 { - compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x07804000 0x1000>, <0x7805000 0x1000>; - reg-names = "hc", "cqhci"; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; - clock-names = "iface", "core", "xo"; - - status = "disabled"; - }; - - blsp1_dma: dma-controller@7884000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07884000 0x25000>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - status = "okay"; - }; - - blsp1_uart0: serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x078af000 0x200>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart0_default>; - status = "disabled"; - }; - - blsp1_uart1: serial@78b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x078b0000 0x200>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart1_default>; - status = "disabled"; - }; - - blsp1_uart2: serial@78b1000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x078b1000 0x200>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_default>; - status = "okay"; - }; - - ethernet: ethernet@7a80000 { - compatible = "qcom,qcs404-ethqos"; - reg = <0x07a80000 0x10000>, - <0x07a96000 0x100>; - reg-names = "stmmaceth", "rgmii"; - clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; - clocks = <&gcc GCC_ETH_AXI_CLK>, - <&gcc GCC_ETH_SLAVE_AHB_CLK>, - <&gcc GCC_ETH_PTP_CLK>, - <&gcc GCC_ETH_RGMII_CLK>; - interrupts = , - ; - interrupt-names = "macirq", "eth_lpi"; - - snps,tso; - rx-fifo-depth = <4096>; - tx-fifo-depth = <4096>; - - status = "disabled"; - }; - - wifi: wifi@a000000 { - compatible = "qcom,wcn3990-wifi"; - reg = <0xa000000 0x800000>; - reg-names = "membase"; - memory-region = <&wlan_msa_mem>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - status = "disabled"; - }; - - blsp1_uart3: serial@78b2000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x078b2000 0x200>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart3_default>; - status = "disabled"; - }; - - blsp1_i2c0: i2c@78b5000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b5000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_i2c0_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_spi0: spi@78b5000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b5000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_spi0_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_i2c1: i2c@78b6000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b6000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_i2c1_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_spi1: spi@78b6000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b6000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_spi1_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_i2c2: i2c@78b7000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b7000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_i2c2_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_spi2: spi@78b7000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b7000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_spi2_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_i2c3: i2c@78b8000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b8000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_i2c3_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_spi3: spi@78b8000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b8000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_spi3_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_i2c4: i2c@78b9000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x078b9000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_i2c4_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp1_spi4: spi@78b9000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x078b9000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_spi4_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_dma: dma-controller@7ac4000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x07ac4000 0x17000>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - status = "disabled"; - }; - - blsp2_uart0: serial@7aef000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x07aef000 0x200>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; - dma-names = "tx", "rx"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart0_default>; - status = "disabled"; - }; - - blsp2_i2c0: i2c@7af5000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x07af5000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_i2c0_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - blsp2_spi0: spi@7af5000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x07af5000 0x600>; - interrupts = ; - clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_spi0_default>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - sram@8600000 { - compatible = "qcom,qcs404-imem", "syscon", "simple-mfd"; - reg = <0x08600000 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - - ranges = <0 0x08600000 0x1000>; - - pil-reloc@94c { - compatible = "qcom,pil-reloc-info"; - reg = <0x94c 0xc8>; - }; - }; - - intc: interrupt-controller@b000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x0b000000 0x1000>, - <0x0b002000 0x1000>; - }; - - apcs_glb: mailbox@b011000 { - compatible = "qcom,qcs404-apcs-apps-global", - "qcom,msm8916-apcs-kpss-global", "syscon"; - reg = <0x0b011000 0x1000>; - #mbox-cells = <1>; - clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; - clock-names = "pll", "aux"; - #clock-cells = <0>; - }; - - apcs_hfpll: clock-controller@b016000 { - compatible = "qcom,hfpll"; - reg = <0x0b016000 0x30>; - #clock-cells = <0>; - clock-output-names = "apcs_hfpll"; - clocks = <&xo_board>; - clock-names = "xo"; - }; - - watchdog@b017000 { - compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; - reg = <0x0b017000 0x1000>; - clocks = <&sleep_clk>; - }; - - cpr: power-controller@b018000 { - compatible = "qcom,qcs404-cpr", "qcom,cpr"; - reg = <0x0b018000 0x1000>; - interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; - clocks = <&xo_board>; - clock-names = "ref"; - vdd-apc-supply = <&pms405_s3>; - #power-domain-cells = <0>; - operating-points-v2 = <&cpr_opp_table>; - acc-syscon = <&tcsr>; - - nvmem-cells = <&cpr_efuse_quot_offset1>, - <&cpr_efuse_quot_offset2>, - <&cpr_efuse_quot_offset3>, - <&cpr_efuse_init_voltage1>, - <&cpr_efuse_init_voltage2>, - <&cpr_efuse_init_voltage3>, - <&cpr_efuse_quot1>, - <&cpr_efuse_quot2>, - <&cpr_efuse_quot3>, - <&cpr_efuse_ring1>, - <&cpr_efuse_ring2>, - <&cpr_efuse_ring3>, - <&cpr_efuse_revision>; - nvmem-cell-names = "cpr_quotient_offset1", - "cpr_quotient_offset2", - "cpr_quotient_offset3", - "cpr_init_voltage1", - "cpr_init_voltage2", - "cpr_init_voltage3", - "cpr_quotient1", - "cpr_quotient2", - "cpr_quotient3", - "cpr_ring_osc1", - "cpr_ring_osc2", - "cpr_ring_osc3", - "cpr_fuse_revision"; - }; - - timer@b120000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0x0b120000 0x1000>; - clock-frequency = <19200000>; - - frame@b121000 { - frame-number = <0>; - interrupts = , - ; - reg = <0x0b121000 0x1000>, - <0x0b122000 0x1000>; - }; - - frame@b123000 { - frame-number = <1>; - interrupts = ; - reg = <0x0b123000 0x1000>; - status = "disabled"; - }; - - frame@b124000 { - frame-number = <2>; - interrupts = ; - reg = <0x0b124000 0x1000>; - status = "disabled"; - }; - - frame@b125000 { - frame-number = <3>; - interrupts = ; - reg = <0x0b125000 0x1000>; - status = "disabled"; - }; - - frame@b126000 { - frame-number = <4>; - interrupts = ; - reg = <0x0b126000 0x1000>; - status = "disabled"; - }; - - frame@b127000 { - frame-number = <5>; - interrupts = ; - reg = <0xb127000 0x1000>; - status = "disabled"; - }; - - frame@b128000 { - frame-number = <6>; - interrupts = ; - reg = <0x0b128000 0x1000>; - status = "disabled"; - }; - }; - - remoteproc_adsp: remoteproc@c700000 { - compatible = "qcom,qcs404-adsp-pas"; - reg = <0x0c700000 0x4040>; - - interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&adsp_fw_mem>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - - qcom,remote-pid = <2>; - mboxes = <&apcs_glb 8>; - - label = "adsp"; - }; - }; - - pcie: pci@10000000 { - compatible = "qcom,pcie-qcs404"; - reg = <0x10000000 0xf1d>, - <0x10000f20 0xa8>, - <0x07780000 0x2000>, - <0x10001000 0x2000>; - reg-names = "dbi", "elbi", "parf", "config"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */ - <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */ - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>; - clock-names = "iface", "aux", "master_bus", "slave_bus"; - - resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>, - <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>, - <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>, - <&gcc GCC_PCIE_0_CORE_STICKY_ARES>, - <&gcc GCC_PCIE_0_BCR>, - <&gcc GCC_PCIE_0_AHB_ARES>; - reset-names = "axi_m", - "axi_s", - "axi_m_sticky", - "pipe_sticky", - "pwr", - "ahb"; - - phys = <&pcie_phy>; - phy-names = "pciephy"; - - status = "disabled"; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - smp2p-adsp { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; - interrupts = ; - mboxes = <&apcs_glb 10>; - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-cdsp { - compatible = "qcom,smp2p"; - qcom,smem = <94>, <432>; - interrupts = ; - mboxes = <&apcs_glb 14>; - qcom,local-pid = <0>; - qcom,remote-pid = <5>; - - cdsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - cdsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-wcss { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; - interrupts = ; - mboxes = <&apcs_glb 18>; - qcom,local-pid = <0>; - qcom,remote-pid = <1>; - - wcss_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - wcss_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - thermal-zones { - aoss-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 0>; - - trips { - aoss_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - q6-hvx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 1>; - - trips { - q6_hvx_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - lpass-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 2>; - - trips { - lpass_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 3>; - - trips { - wlan_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - cluster-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; - - trips { - cluster_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - cluster_alert1: trip-point1 { - temperature = <105000>; - hysteresis = <2000>; - type = "passive"; - }; - cluster_crit: cluster-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - cooling-maps { - map0 { - trip = <&cluster_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; - - trips { - cpu0_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - cpu0_alert1: trip-point1 { - temperature = <105000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu0_crit: cpu-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu0_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 6>; - - trips { - cpu1_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - cpu1_alert1: trip-point1 { - temperature = <105000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu1_crit: cpu-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu1_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 7>; - - trips { - cpu2_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - cpu2_alert1: trip-point1 { - temperature = <105000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu2_crit: cpu-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu2_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 8>; - - trips { - cpu3_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - cpu3_alert1: trip-point1 { - temperature = <105000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu3_crit: cpu-crit { - temperature = <120000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu3_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - gpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 9>; - - trips { - gpu_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - }; -}; diff --git a/arch/arm/dts/sdm845-db845c.dts b/arch/arm/dts/sdm845-db845c.dts deleted file mode 100644 index c7eba6c491be..000000000000 --- a/arch/arm/dts/sdm845-db845c.dts +++ /dev/null @@ -1,1190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2019, Linaro Ltd. - */ - -/dts-v1/; - -#include -#include -#include -#include -#include -#include "sdm845.dtsi" -#include "sdm845-wcd9340.dtsi" -#include "pm8998.dtsi" -#include "pmi8998.dtsi" - -/ { - model = "Thundercomm Dragonboard 845c"; - compatible = "thundercomm,db845c", "qcom,sdm845"; - qcom,msm-id = <341 0x20001>; - qcom,board-id = <8 0>; - - aliases { - serial0 = &uart9; - serial1 = &uart6; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* Fixed crystal oscillator dedicated to MCP2517FD */ - clk40M: can-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <40000000>; - }; - - dc12v: dc12v-regulator { - compatible = "regulator-fixed"; - regulator-name = "DC12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&vol_up_pin_a>; - - key-vol-up { - label = "Volume Up"; - linux,code = ; - gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "green:user4"; - function = LED_FUNCTION_INDICATOR; - color = ; - gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "panic-indicator"; - default-state = "off"; - }; - - led-1 { - label = "yellow:wlan"; - function = LED_FUNCTION_WLAN; - color = ; - gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - led-2 { - label = "blue:bt"; - function = LED_FUNCTION_BLUETOOTH; - color = ; - gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bluetooth-power"; - default-state = "off"; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <<9611_out>; - }; - }; - }; - - reserved-memory { - /* Cont splash region set up by the bootloader */ - cont_splash_mem: framebuffer@9d400000 { - reg = <0x0 0x9d400000 0x0 0x2400000>; - no-map; - }; - }; - - lt9611_1v8: lt9611-vdd18-regulator { - compatible = "regulator-fixed"; - regulator-name = "LT9611_1V8"; - - vin-supply = <&vdc_5v>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - lt9611_3v3: lt9611-3v3 { - compatible = "regulator-fixed"; - regulator-name = "LT9611_3V3"; - - vin-supply = <&vdc_3v3>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - /* - * TODO: make it possible to drive same GPIO from two clients - * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - * enable-active-high; - */ - }; - - pcie0_1p05v: pcie-0-1p05v-regulator { - compatible = "regulator-fixed"; - regulator-name = "PCIE0_1.05V"; - - vin-supply = <&vbat>; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - - /* - * TODO: make it possible to drive same GPIO from two clients - * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; - * enable-active-high; - */ - }; - - cam0_dvdd_1v2: cam0-dvdd-1v2-regulator { - compatible = "regulator-fixed"; - regulator-name = "CAM0_DVDD_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - enable-active-high; - gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cam0_dvdd_1v2_en_default>; - vin-supply = <&vbat>; - }; - - cam0_avdd_2v8: cam0-avdd-2v8-regulator { - compatible = "regulator-fixed"; - regulator-name = "CAM0_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - enable-active-high; - gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cam0_avdd_2v8_en_default>; - vin-supply = <&vbat>; - }; - - /* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */ - cam3_avdd_2v8: cam3-avdd-2v8-regulator { - compatible = "regulator-fixed"; - regulator-name = "CAM3_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - vin-supply = <&vbat>; - }; - - pcie0_3p3v_dual: vldo-3v3-regulator { - compatible = "regulator-fixed"; - regulator-name = "VLDO_3V3"; - - vin-supply = <&vbat>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_pwren_state>; - }; - - v5p0_hdmiout: v5p0-hdmiout-regulator { - compatible = "regulator-fixed"; - regulator-name = "V5P0_HDMIOUT"; - - vin-supply = <&vdc_5v>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <500000>; - - /* - * TODO: make it possible to drive same GPIO from two clients - * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - * enable-active-high; - */ - }; - - vbat: vbat-regulator { - compatible = "regulator-fixed"; - regulator-name = "VBAT"; - - vin-supply = <&dc12v>; - regulator-min-microvolt = <4200000>; - regulator-max-microvolt = <4200000>; - regulator-always-on; - }; - - vbat_som: vbat-som-regulator { - compatible = "regulator-fixed"; - regulator-name = "VBAT_SOM"; - - vin-supply = <&dc12v>; - regulator-min-microvolt = <4200000>; - regulator-max-microvolt = <4200000>; - regulator-always-on; - }; - - vdc_3v3: vdc-3v3-regulator { - compatible = "regulator-fixed"; - regulator-name = "VDC_3V3"; - vin-supply = <&dc12v>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdc_5v: vdc-5v-regulator { - compatible = "regulator-fixed"; - regulator-name = "VDC_5V"; - - vin-supply = <&dc12v>; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <500000>; - regulator-always-on; - }; - - vreg_s4a_1p8: vreg-s4a-1p8 { - compatible = "regulator-fixed"; - regulator-name = "vreg_s4a_1p8"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - - vin-supply = <&vbat_som>; - }; -}; - -&adsp_pas { - status = "okay"; - - firmware-name = "qcom/sdm845/adsp.mbn"; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s6-supply = <&vph_pwr>; - vdd-s7-supply = <&vph_pwr>; - vdd-s8-supply = <&vph_pwr>; - vdd-s9-supply = <&vph_pwr>; - vdd-s10-supply = <&vph_pwr>; - vdd-s11-supply = <&vph_pwr>; - vdd-s12-supply = <&vph_pwr>; - vdd-s13-supply = <&vph_pwr>; - vdd-l1-l27-supply = <&vreg_s7a_1p025>; - vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; - vdd-l3-l11-supply = <&vreg_s7a_1p025>; - vdd-l4-l5-supply = <&vreg_s7a_1p025>; - vdd-l6-supply = <&vph_pwr>; - vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; - vdd-l9-supply = <&vreg_bob>; - vdd-l10-l23-l25-supply = <&vreg_bob>; - vdd-l13-l19-l21-supply = <&vreg_bob>; - vdd-l16-l28-supply = <&vreg_bob>; - vdd-l18-l22-supply = <&vreg_bob>; - vdd-l20-l24-supply = <&vreg_bob>; - vdd-l26-supply = <&vreg_s3a_1p35>; - vin-lvs-1-2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p35: smps3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - - vreg_s5a_2p04: smps5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - - vreg_s7a_1p025: smps7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - - vreg_l1a_0p875: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = ; - }; - - vreg_l5a_0p8: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = ; - }; - - vreg_l12a_1p8: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l7a_1p8: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l13a_2p95: ldo13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l17a_1p3: ldo17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - vreg_l20a_2p95: ldo20 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2968000>; - regulator-initial-mode = ; - }; - - vreg_l21a_2p95: ldo21 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2968000>; - regulator-initial-mode = ; - }; - - vreg_l24a_3p075: ldo24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - regulator-initial-mode = ; - }; - - vreg_l25a_3p3: ldo25 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vreg_l26a_1p2: ldo26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - - regulators-1 { - compatible = "qcom,pmi8998-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd-bob-supply = <&vph_pwr>; - - vreg_bob: bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - regulator-initial-mode = ; - regulator-allow-bypass; - }; - }; -}; - -&camss { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; -}; - -&cdsp_pas { - status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mbn"; -}; - -&gcc { - protected-clocks = , - , - , - , - ; -}; - -&gmu { - status = "okay"; -}; - -&gpi_dma0 { - status = "okay"; -}; - -&gpi_dma1 { - status = "okay"; -}; - -&gpu { - status = "okay"; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; -}; - -&i2c10 { - status = "okay"; - clock-frequency = <400000>; - - lt9611_codec: hdmi-bridge@3b { - compatible = "lontium,lt9611"; - reg = <0x3b>; - #sound-dai-cells = <1>; - - interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; - - reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; - - vdd-supply = <<9611_1v8>; - vcc-supply = <<9611_3v3>; - - pinctrl-names = "default"; - pinctrl-0 = <<9611_irq_pin>, <&dsi_sw_sel>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lt9611_a: endpoint { - remote-endpoint = <&mdss_dsi0_out>; - }; - }; - - port@1 { - reg = <1>; - - lt9611_b: endpoint { - remote-endpoint = <&mdss_dsi1_out>; - }; - }; - - port@2 { - reg = <2>; - - lt9611_out: endpoint { - remote-endpoint = <&hdmi_con>; - }; - }; - }; - }; -}; - -&i2c11 { - /* On Low speed expansion */ - clock-frequency = <100000>; - status = "okay"; -}; - -&i2c14 { - /* On Low speed expansion */ - clock-frequency = <100000>; - status = "okay"; -}; - -&mdss { - memory-region = <&cont_splash_mem>; - status = "okay"; -}; - -&mdss_dsi0 { - status = "okay"; - vdda-supply = <&vreg_l26a_1p2>; - - qcom,dual-dsi-mode; - qcom,master-dsi; - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_a>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&mdss_dsi0_phy { - status = "okay"; - vdds-supply = <&vreg_l1a_0p875>; -}; - -&mdss_dsi1 { - vdda-supply = <&vreg_l26a_1p2>; - - qcom,dual-dsi-mode; - - /* DSI1 is slave, so use DSI0 clocks */ - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; - - status = "okay"; - - ports { - port@1 { - endpoint { - remote-endpoint = <<9611_b>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&mdss_dsi1_phy { - vdds-supply = <&vreg_l1a_0p875>; - status = "okay"; -}; - -&mss_pil { - status = "okay"; - firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; -}; - -&pcie0 { - status = "okay"; - perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; - - vddpe-3v3-supply = <&pcie0_3p3v_dual>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; -}; - -&pcie0_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; -}; - -&pcie1 { - status = "okay"; - perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; -}; - -&pcie1_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; -}; - -&pm8998_gpios { - gpio-line-names = - "NC", - "NC", - "WLAN_SW_CTRL", - "NC", - "PM_GPIO5_BLUE_BT_LED", - "VOL_UP_N", - "NC", - "ADC_IN1", - "PM_GPIO9_YEL_WIFI_LED", - "CAM0_AVDD_EN", - "NC", - "CAM0_DVDD_EN", - "PM_GPIO13_GREEN_U4_LED", - "DIV_CLK2", - "NC", - "NC", - "NC", - "SMB_STAT", - "NC", - "NC", - "ADC_IN2", - "OPTION1", - "WCSS_PWR_REQ", - "PM845_GPIO24", - "OPTION2", - "PM845_SLB"; - - cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state { - pins = "gpio12"; - function = "normal"; - - bias-pull-up; - drive-push-pull; - qcom,drive-strength = ; - }; - - cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state { - pins = "gpio10"; - function = "normal"; - - bias-pull-up; - drive-push-pull; - qcom,drive-strength = ; - }; - - vol_up_pin_a: vol-up-active-state { - pins = "gpio6"; - function = "normal"; - input-enable; - bias-pull-up; - qcom,drive-strength = ; - }; -}; - -&pm8998_resin { - linux,code = ; - status = "okay"; -}; - -&pmi8998_lpg { - status = "okay"; - - qcom,power-source = <1>; - - led@3 { - reg = <3>; - color = ; - function = LED_FUNCTION_HEARTBEAT; - function-enumerator = <3>; - - linux,default-trigger = "heartbeat"; - default-state = "on"; - }; - - led@4 { - reg = <4>; - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - }; - - led@5 { - reg = <5>; - color = ; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - }; -}; - -/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ -&q6afedai { - dai@22 { - reg = ; - qcom,sd-lines = <0 1 2 3>; - }; -}; - -&q6asmdai { - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; - - dai@2 { - reg = <2>; - }; - - dai@3 { - reg = <3>; - direction = <2>; - is-compress-dai; - }; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; - - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - - bus-width = <4>; - cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; -}; - -&sound { - compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard"; - pinctrl-0 = <&quat_mi2s_active - &quat_mi2s_sd0_active - &quat_mi2s_sd1_active - &quat_mi2s_sd2_active - &quat_mi2s_sd3_active>; - pinctrl-names = "default"; - model = "DB845c"; - audio-routing = - "RX_BIAS", "MCLK", - "AMIC1", "MIC BIAS1", - "AMIC2", "MIC BIAS2", - "DMIC0", "MIC BIAS1", - "DMIC1", "MIC BIAS1", - "DMIC2", "MIC BIAS3", - "DMIC3", "MIC BIAS3", - "SpkrLeft IN", "SPK1 OUT", - "SpkrRight IN", "SPK2 OUT", - "MM_DL1", "MultiMedia1 Playback", - "MM_DL2", "MultiMedia2 Playback", - "MM_DL4", "MultiMedia4 Playback", - "MultiMedia3 Capture", "MM_UL3"; - - mm1-dai-link { - link-name = "MultiMedia1"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; - }; - }; - - mm2-dai-link { - link-name = "MultiMedia2"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; - }; - }; - - mm3-dai-link { - link-name = "MultiMedia3"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; - }; - }; - - mm4-dai-link { - link-name = "MultiMedia4"; - cpu { - sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; - }; - }; - - hdmi-dai-link { - link-name = "HDMI Playback"; - cpu { - sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <<9611_codec 0>; - }; - }; - - slim-dai-link { - link-name = "SLIM Playback"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_RX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; - }; - }; - - slimcap-dai-link { - link-name = "SLIM Capture"; - cpu { - sound-dai = <&q6afedai SLIMBUS_0_TX>; - }; - - platform { - sound-dai = <&q6routing>; - }; - - codec { - sound-dai = <&wcd9340 1>; - }; - }; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi0_default>; - cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; - - can@0 { - compatible = "microchip,mcp2517fd"; - reg = <0>; - clocks = <&clk40M>; - interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; - spi-max-frequency = <10000000>; - vdd-supply = <&vdc_5v>; - xceiver-supply = <&vdc_5v>; - }; -}; - -&spi2 { - /* On Low speed expansion */ - status = "okay"; -}; - -&tlmm { - cam0_default: cam0-default-state { - rst-pins { - pins = "gpio9"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - mclk0-pins { - pins = "gpio13"; - function = "cam_mclk"; - - drive-strength = <16>; - bias-disable; - }; - }; - - cam3_default: cam3-default-state { - rst-pins { - function = "gpio"; - pins = "gpio21"; - - drive-strength = <16>; - bias-disable; - }; - - mclk3-pins { - function = "cam_mclk"; - pins = "gpio16"; - - drive-strength = <16>; - bias-disable; - }; - }; - - dsi_sw_sel: dsi-sw-sel-state { - pins = "gpio120"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - output-high; - }; - - lt9611_irq_pin: lt9611-irq-state { - pins = "gpio84"; - function = "gpio"; - bias-disable; - }; - - pcie0_default_state: pcie0-default-state { - clkreq-pins { - pins = "gpio36"; - function = "pci_e0"; - bias-pull-up; - }; - - reset-n-pins { - pins = "gpio35"; - function = "gpio"; - - drive-strength = <2>; - output-low; - bias-pull-down; - }; - - wake-n-pins { - pins = "gpio37"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - }; - - pcie0_pwren_state: pcie0-pwren-state { - pins = "gpio90"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - pcie1_default_state: pcie1-default-state { - perst-n-pins { - pins = "gpio102"; - function = "gpio"; - - drive-strength = <16>; - bias-disable; - }; - - clkreq-pins { - pins = "gpio103"; - function = "pci_e1"; - bias-pull-up; - }; - - wake-n-pins { - pins = "gpio11"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - - reset-n-pins { - pins = "gpio75"; - function = "gpio"; - - drive-strength = <16>; - bias-pull-up; - output-high; - }; - }; - - sdc2_default_state: sdc2-default-state { - clk-pins { - pins = "sdc2_clk"; - bias-disable; - - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - */ - drive-strength = <16>; - }; - - cmd-pins { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data-pins { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - }; - - sdc2_card_det_n: sd-card-det-n-state { - pins = "gpio126"; - function = "gpio"; - bias-pull-up; - }; -}; - -&uart3 { - label = "LS-UART0"; - pinctrl-0 = <&qup_uart3_4pin>; - - status = "disabled"; -}; - -&uart6 { - status = "okay"; - - pinctrl-0 = <&qup_uart6_4pin>; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - }; -}; - -&uart9 { - label = "LS-UART1"; - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "peripheral"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdd-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; - qcom,preemphasis-level = ; - qcom,preemphasis-width = ; -}; - -&usb_1_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l26a_1p2>; - vdda-pll-supply = <&vreg_l1a_0p875>; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdd-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; -}; - -&usb_2_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vreg_l26a_1p2>; - vdda-pll-supply = <&vreg_l1a_0p875>; -}; - -&ufs_mem_hc { - status = "okay"; - - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; - - vcc-supply = <&vreg_l20a_2p95>; - vcc-max-microamp = <800000>; -}; - -&ufs_mem_phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; -}; - -&venus { - status = "okay"; -}; - -&wcd9340 { - reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; - - swm: swm@c85 { - left_spkr: speaker@0,1 { - compatible = "sdw10217201000"; - reg = <0 1>; - powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; - #thermal-sensor-cells = <0>; - sound-name-prefix = "SpkrLeft"; - #sound-dai-cells = <0>; - }; - - right_spkr: speaker@0,2 { - compatible = "sdw10217201000"; - powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; - reg = <0 2>; - #thermal-sensor-cells = <0>; - sound-name-prefix = "SpkrRight"; - #sound-dai-cells = <0>; - }; - }; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - - qcom,snoc-host-cap-8bit-quirk; - qcom,ath10k-calibration-variant = "Thundercomm_DB845C"; -}; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ -&qup_spi2_default { - drive-strength = <16>; -}; - -&qup_i2c10_default { - drive-strength = <2>; - bias-disable; -}; - -&qup_uart9_rx { - drive-strength = <2>; - bias-pull-up; -}; - -&qup_uart9_tx { - drive-strength = <2>; - bias-disable; -}; - -/* PINCTRL - additions to nodes defined in sdm845.dtsi */ -&qup_spi0_default { - drive-strength = <6>; - bias-disable; -}; diff --git a/arch/arm/dts/sdm845-samsung-starqltechn.dts b/arch/arm/dts/sdm845-samsung-starqltechn.dts deleted file mode 100644 index d37a433130b9..000000000000 --- a/arch/arm/dts/sdm845-samsung-starqltechn.dts +++ /dev/null @@ -1,460 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source - * - * Copyright (c) 2020, The Linux Foundation. All rights reserved. - */ - -/dts-v1/; - -#include -#include -#include "sdm845.dtsi" - -/ { - chassis-type = "handset"; - model = "Samsung Galaxy S9 SM-G9600"; - compatible = "samsung,starqltechn", "qcom,sdm845"; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - framebuffer: framebuffer@9d400000 { - compatible = "simple-framebuffer"; - reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000 - width = <1440>; - height = <2960>; - stride = <(1440 * 4)>; - format = "a8r8g8b8"; - }; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - /* - * Apparently RPMh does not provide support for PM8998 S4 because it - * is always-on; model it as a fixed regulator. - */ - vreg_s4a_1p8: pm8998-smps4 { - compatible = "regulator-fixed"; - regulator-name = "vreg_s4a_1p8"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - - vin-supply = <&vph_pwr>; - }; - - reserved-memory { - memory@9d400000 { - reg = <0x0 0x9d400000 0x0 0x02400000>; - no-map; - }; - - memory@a1300000 { - compatible = "ramoops"; - reg = <0x0 0xa1300000 0x0 0x100000>; - record-size = <0x40000>; - console-size = <0x40000>; - ftrace-size = <0x40000>; - pmsg-size = <0x40000>; - }; - }; -}; - - -&apps_rsc { - regulators-0 { - compatible = "qcom,pm8998-rpmh-regulators"; - qcom,pmic-id = "a"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - vdd-s5-supply = <&vph_pwr>; - vdd-s6-supply = <&vph_pwr>; - vdd-s7-supply = <&vph_pwr>; - vdd-s8-supply = <&vph_pwr>; - vdd-s9-supply = <&vph_pwr>; - vdd-s10-supply = <&vph_pwr>; - vdd-s11-supply = <&vph_pwr>; - vdd-s12-supply = <&vph_pwr>; - vdd-s13-supply = <&vph_pwr>; - vdd-l1-l27-supply = <&vreg_s7a_1p025>; - vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; - vdd-l3-l11-supply = <&vreg_s7a_1p025>; - vdd-l4-l5-supply = <&vreg_s7a_1p025>; - vdd-l6-supply = <&vph_pwr>; - vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; - vdd-l26-supply = <&vreg_s3a_1p35>; - vin-lvs-1-2-supply = <&vreg_s4a_1p8>; - - vreg_s2a_1p125: smps2 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - vreg_s3a_1p35: smps3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - - vreg_s5a_2p04: smps5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - - vreg_s7a_1p025: smps7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - - vdd_qusb_hs0: - vdda_hp_pcie_core: - vdda_mipi_csi0_0p9: - vdda_mipi_csi1_0p9: - vdda_mipi_csi2_0p9: - vdda_mipi_dsi0_pll: - vdda_mipi_dsi1_pll: - vdda_qlink_lv: - vdda_qlink_lv_ck: - vdda_qrefs_0p875: - vdda_pcie_core: - vdda_pll_cc_ebi01: - vdda_pll_cc_ebi23: - vdda_sp_sensor: - vdda_ufs1_core: - vdda_ufs2_core: - vdda_usb1_ss_core: - vdda_usb2_ss_core: - vreg_l1a_0p875: ldo1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - regulator-initial-mode = ; - }; - - vddpx_10: - vreg_l2a_1p2: ldo2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - regulator-always-on; - }; - - vreg_l3a_1p0: ldo3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-initial-mode = ; - }; - - vdd_wcss_cx: - vdd_wcss_mx: - vdda_wcss_pll: - vreg_l5a_0p8: ldo5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = ; - }; - - vddpx_13: - vreg_l6a_1p8: ldo6 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <1856000>; - regulator-initial-mode = ; - }; - - vreg_l7a_1p8: ldo7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l8a_1p2: ldo8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1248000>; - regulator-initial-mode = ; - }; - - vreg_l9a_1p8: ldo9 { - regulator-min-microvolt = <1704000>; - regulator-max-microvolt = <2928000>; - regulator-initial-mode = ; - }; - - vreg_l10a_1p8: ldo10 { - regulator-min-microvolt = <1704000>; - regulator-max-microvolt = <2928000>; - regulator-initial-mode = ; - }; - - vreg_l11a_1p0: ldo11 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1048000>; - regulator-initial-mode = ; - }; - - vdd_qfprom: - vdd_qfprom_sp: - vdda_apc1_cs_1p8: - vdda_gfx_cs_1p8: - vdda_qrefs_1p8: - vdda_qusb_hs0_1p8: - vddpx_11: - vreg_l12a_1p8: ldo12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vddpx_2: - vreg_l13a_2p95: ldo13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l14a_1p88: ldo14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l15a_1p8: ldo15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = ; - }; - - vreg_l16a_2p7: ldo16 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - regulator-initial-mode = ; - }; - - vreg_l17a_1p3: ldo17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - regulator-initial-mode = ; - }; - - vreg_l18a_2p7: ldo18 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l19a_3p0: ldo19 { - regulator-min-microvolt = <2856000>; - regulator-max-microvolt = <3104000>; - regulator-initial-mode = ; - }; - - vreg_l20a_2p95: ldo20 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l21a_2p95: ldo21 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = ; - }; - - vreg_l22a_2p85: ldo22 { - regulator-min-microvolt = <2864000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vreg_l23a_3p3: ldo23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vdda_qusb_hs0_3p1: - vreg_l24a_3p075: ldo24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - regulator-initial-mode = ; - }; - - vreg_l25a_3p3: ldo25 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3312000>; - regulator-initial-mode = ; - }; - - vdda_hp_pcie_1p2: - vdda_hv_ebi0: - vdda_hv_ebi1: - vdda_hv_ebi2: - vdda_hv_ebi3: - vdda_mipi_csi_1p25: - vdda_mipi_dsi0_1p2: - vdda_mipi_dsi1_1p2: - vdda_pcie_1p2: - vdda_ufs1_1p2: - vdda_ufs2_1p2: - vdda_usb1_ss_1p2: - vdda_usb2_ss_1p2: - vreg_l26a_1p2: ldo26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = ; - }; - - vreg_l28a_3p0: ldo28 { - regulator-min-microvolt = <2856000>; - regulator-max-microvolt = <3008000>; - regulator-initial-mode = ; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - - regulators-1 { - compatible = "qcom,pm8005-rpmh-regulators"; - qcom,pmic-id = "c"; - - vdd-s1-supply = <&vph_pwr>; - vdd-s2-supply = <&vph_pwr>; - vdd-s3-supply = <&vph_pwr>; - vdd-s4-supply = <&vph_pwr>; - - vreg_s3c_0p6: smps3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <600000>; - }; - }; -}; - -&gcc { - protected-clocks = , - , - , - , - ; -}; - -&i2c10 { - clock-frequency = <400000>; - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&uart9 { - status = "okay"; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; - vcc-supply = <&vreg_l20a_2p95>; - vcc-max-microamp = <600000>; - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vdda_ufs1_core>; - vdda-pll-supply = <&vdda_ufs1_1p2>; - status = "okay"; -}; - -&sdhc_2 { - pinctrl-names = "default"; - pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>; - cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vddpx_2>; - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - /* Until we have Type C hooked up we'll force this as peripheral. */ - dr_mode = "peripheral"; -}; - -&usb_1_hsphy { - vdd-supply = <&vdda_usb1_ss_core>; - vdda-pll-supply = <&vdda_qusb_hs0_1p8>; - vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; - - qcom,imp-res-offset-value = <8>; - qcom,hstx-trim-value = ; - qcom,preemphasis-level = ; - qcom,preemphasis-width = ; - status = "okay"; -}; - -&usb_1_qmpphy { - vdda-phy-supply = <&vdda_usb1_ss_1p2>; - vdda-pll-supply = <&vdda_usb1_ss_core>; - status = "okay"; -}; - -&wifi { - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; - status = "okay"; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>; - - sdc2_clk_state: sdc2-clk-state { - pins = "sdc2_clk"; - bias-disable; - - /* - * It seems that mmc_test reports errors if drive - * strength is not 16 on clk, cmd, and data pins. - */ - drive-strength = <16>; - }; - - sdc2_cmd_state: sdc2-cmd-state { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <16>; - }; - - sdc2_data_state: sdc2-data-state { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <16>; - }; - - sd_card_det_n_state: sd-card-det-n-state { - pins = "gpio126"; - function = "gpio"; - bias-pull-up; - }; -}; diff --git a/arch/arm/dts/sdm845-wcd9340.dtsi b/arch/arm/dts/sdm845-wcd9340.dtsi deleted file mode 100644 index c15d48860646..000000000000 --- a/arch/arm/dts/sdm845-wcd9340.dtsi +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SDM845 SoC device tree source - * - * Copyright (c) 2018, The Linux Foundation. All rights reserved. - */ - -&slim { - status = "okay"; - - slim@1 { - reg = <1>; - #address-cells = <2>; - #size-cells = <0>; - - wcd9340_ifd: ifd@0,0 { - compatible = "slim217,250"; - reg = <0 0>; - }; - - wcd9340: codec@1,0 { - compatible = "slim217,250"; - reg = <1 0>; - slim-ifc-dev = <&wcd9340_ifd>; - - #sound-dai-cells = <1>; - - interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - - clock-names = "extclk"; - clocks = <&rpmhcc RPMH_LN_BB_CLK2>; - - #clock-cells = <0>; - clock-frequency = <9600000>; - clock-output-names = "mclk"; - - pinctrl-0 = <&wcd_intr_default>; - pinctrl-names = "default"; - - qcom,micbias1-microvolt = <1800000>; - qcom,micbias2-microvolt = <1800000>; - qcom,micbias3-microvolt = <1800000>; - qcom,micbias4-microvolt = <1800000>; - - #address-cells = <1>; - #size-cells = <1>; - - wcdgpio: gpio-controller@42 { - compatible = "qcom,wcd9340-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x42 0x2>; - }; - - swm: swm@c85 { - compatible = "qcom,soundwire-v1.3.0"; - reg = <0xc85 0x40>; - interrupts-extended = <&wcd9340 20>; - - qcom,dout-ports = <6>; - qcom,din-ports = <2>; - qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>; - qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>; - - #sound-dai-cells = <1>; - clocks = <&wcd9340>; - clock-names = "iface"; - #address-cells = <2>; - #size-cells = <0>; - }; - }; - }; -}; - -&tlmm { - wcd_intr_default: wcd-intr-default-state { - pins = "gpio54"; - function = "gpio"; - - bias-pull-down; - drive-strength = <2>; - }; -}; diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi deleted file mode 100644 index bf5e6eb9d313..000000000000 --- a/arch/arm/dts/sdm845.dtsi +++ /dev/null @@ -1,5752 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SDM845 SoC device tree source - * - * Copyright (c) 2018, The Linux Foundation. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - - #address-cells = <2>; - #size-cells = <2>; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c7; - i2c8 = &i2c8; - i2c9 = &i2c9; - i2c10 = &i2c10; - i2c11 = &i2c11; - i2c12 = &i2c12; - i2c13 = &i2c13; - i2c14 = &i2c14; - i2c15 = &i2c15; - spi0 = &spi0; - spi1 = &spi1; - spi2 = &spi2; - spi3 = &spi3; - spi4 = &spi4; - spi5 = &spi5; - spi6 = &spi6; - spi7 = &spi7; - spi8 = &spi8; - spi9 = &spi9; - spi10 = &spi10; - spi11 = &spi11; - spi12 = &spi12; - spi13 = &spi13; - spi14 = &spi14; - spi15 = &spi15; - }; - - chosen { }; - - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - clock-output-names = "xo_board"; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32764>; - }; - }; - - cpus: cpus { - #address-cells = <2>; - #size-cells = <0>; - - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x0>; - clocks = <&cpufreq_hw 0>; - enable-method = "psci"; - capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <154>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - power-domains = <&CPU_PD0>; - power-domain-names = "psci"; - #cooling-cells = <2>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&L3_0>; - L3_0: l3-cache { - compatible = "cache"; - cache-level = <3>; - cache-unified; - }; - }; - }; - - CPU1: cpu@100 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x100>; - clocks = <&cpufreq_hw 0>; - enable-method = "psci"; - capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <154>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - power-domains = <&CPU_PD1>; - power-domain-names = "psci"; - #cooling-cells = <2>; - next-level-cache = <&L2_100>; - L2_100: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&L3_0>; - }; - }; - - CPU2: cpu@200 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x200>; - clocks = <&cpufreq_hw 0>; - enable-method = "psci"; - capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <154>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - power-domains = <&CPU_PD2>; - power-domain-names = "psci"; - #cooling-cells = <2>; - next-level-cache = <&L2_200>; - L2_200: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&L3_0>; - }; - }; - - CPU3: cpu@300 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x300>; - clocks = <&cpufreq_hw 0>; - enable-method = "psci"; - capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <154>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - #cooling-cells = <2>; - power-domains = <&CPU_PD3>; - power-domain-names = "psci"; - next-level-cache = <&L2_300>; - L2_300: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&L3_0>; - }; - }; - - CPU4: cpu@400 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x400>; - clocks = <&cpufreq_hw 1>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <442>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - power-domains = <&CPU_PD4>; - power-domain-names = "psci"; - #cooling-cells = <2>; - next-level-cache = <&L2_400>; - L2_400: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&L3_0>; - }; - }; - - CPU5: cpu@500 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x500>; - clocks = <&cpufreq_hw 1>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <442>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - power-domains = <&CPU_PD5>; - power-domain-names = "psci"; - #cooling-cells = <2>; - next-level-cache = <&L2_500>; - L2_500: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&L3_0>; - }; - }; - - CPU6: cpu@600 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x600>; - clocks = <&cpufreq_hw 1>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <442>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - power-domains = <&CPU_PD6>; - power-domain-names = "psci"; - #cooling-cells = <2>; - next-level-cache = <&L2_600>; - L2_600: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&L3_0>; - }; - }; - - CPU7: cpu@700 { - device_type = "cpu"; - compatible = "qcom,kryo385"; - reg = <0x0 0x700>; - clocks = <&cpufreq_hw 1>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <442>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, - <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; - power-domains = <&CPU_PD7>; - power-domain-names = "psci"; - #cooling-cells = <2>; - next-level-cache = <&L2_700>; - L2_700: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&L3_0>; - }; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - - core1 { - cpu = <&CPU1>; - }; - - core2 { - cpu = <&CPU2>; - }; - - core3 { - cpu = <&CPU3>; - }; - - core4 { - cpu = <&CPU4>; - }; - - core5 { - cpu = <&CPU5>; - }; - - core6 { - cpu = <&CPU6>; - }; - - core7 { - cpu = <&CPU7>; - }; - }; - }; - - cpu_idle_states: idle-states { - entry-method = "psci"; - - LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { - compatible = "arm,idle-state"; - idle-state-name = "little-rail-power-collapse"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <350>; - exit-latency-us = <461>; - min-residency-us = <1890>; - local-timer-stop; - }; - - BIG_CPU_SLEEP_0: cpu-sleep-1-0 { - compatible = "arm,idle-state"; - idle-state-name = "big-rail-power-collapse"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <264>; - exit-latency-us = <621>; - min-residency-us = <952>; - local-timer-stop; - }; - }; - - domain-idle-states { - CLUSTER_SLEEP_0: cluster-sleep-0 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x4100c244>; - entry-latency-us = <3263>; - exit-latency-us = <6562>; - min-residency-us = <9987>; - }; - }; - }; - - firmware { - scm { - compatible = "qcom,scm-sdm845", "qcom,scm"; - }; - }; - - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; - }; - - cpu0_opp_table: opp-table-cpu0 { - compatible = "operating-points-v2"; - opp-shared; - - cpu0_opp1: opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-peak-kBps = <800000 4800000>; - }; - - cpu0_opp2: opp-403200000 { - opp-hz = /bits/ 64 <403200000>; - opp-peak-kBps = <800000 4800000>; - }; - - cpu0_opp3: opp-480000000 { - opp-hz = /bits/ 64 <480000000>; - opp-peak-kBps = <800000 6451200>; - }; - - cpu0_opp4: opp-576000000 { - opp-hz = /bits/ 64 <576000000>; - opp-peak-kBps = <800000 6451200>; - }; - - cpu0_opp5: opp-652800000 { - opp-hz = /bits/ 64 <652800000>; - opp-peak-kBps = <800000 7680000>; - }; - - cpu0_opp6: opp-748800000 { - opp-hz = /bits/ 64 <748800000>; - opp-peak-kBps = <1804000 9216000>; - }; - - cpu0_opp7: opp-825600000 { - opp-hz = /bits/ 64 <825600000>; - opp-peak-kBps = <1804000 9216000>; - }; - - cpu0_opp8: opp-902400000 { - opp-hz = /bits/ 64 <902400000>; - opp-peak-kBps = <1804000 10444800>; - }; - - cpu0_opp9: opp-979200000 { - opp-hz = /bits/ 64 <979200000>; - opp-peak-kBps = <1804000 11980800>; - }; - - cpu0_opp10: opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - opp-peak-kBps = <1804000 11980800>; - }; - - cpu0_opp11: opp-1132800000 { - opp-hz = /bits/ 64 <1132800000>; - opp-peak-kBps = <2188000 13516800>; - }; - - cpu0_opp12: opp-1228800000 { - opp-hz = /bits/ 64 <1228800000>; - opp-peak-kBps = <2188000 15052800>; - }; - - cpu0_opp13: opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - opp-peak-kBps = <2188000 16588800>; - }; - - cpu0_opp14: opp-1420800000 { - opp-hz = /bits/ 64 <1420800000>; - opp-peak-kBps = <3072000 18124800>; - }; - - cpu0_opp15: opp-1516800000 { - opp-hz = /bits/ 64 <1516800000>; - opp-peak-kBps = <3072000 19353600>; - }; - - cpu0_opp16: opp-1612800000 { - opp-hz = /bits/ 64 <1612800000>; - opp-peak-kBps = <4068000 19353600>; - }; - - cpu0_opp17: opp-1689600000 { - opp-hz = /bits/ 64 <1689600000>; - opp-peak-kBps = <4068000 20889600>; - }; - - cpu0_opp18: opp-1766400000 { - opp-hz = /bits/ 64 <1766400000>; - opp-peak-kBps = <4068000 22425600>; - }; - }; - - cpu4_opp_table: opp-table-cpu4 { - compatible = "operating-points-v2"; - opp-shared; - - cpu4_opp1: opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-peak-kBps = <800000 4800000>; - }; - - cpu4_opp2: opp-403200000 { - opp-hz = /bits/ 64 <403200000>; - opp-peak-kBps = <800000 4800000>; - }; - - cpu4_opp3: opp-480000000 { - opp-hz = /bits/ 64 <480000000>; - opp-peak-kBps = <1804000 4800000>; - }; - - cpu4_opp4: opp-576000000 { - opp-hz = /bits/ 64 <576000000>; - opp-peak-kBps = <1804000 4800000>; - }; - - cpu4_opp5: opp-652800000 { - opp-hz = /bits/ 64 <652800000>; - opp-peak-kBps = <1804000 4800000>; - }; - - cpu4_opp6: opp-748800000 { - opp-hz = /bits/ 64 <748800000>; - opp-peak-kBps = <1804000 4800000>; - }; - - cpu4_opp7: opp-825600000 { - opp-hz = /bits/ 64 <825600000>; - opp-peak-kBps = <2188000 9216000>; - }; - - cpu4_opp8: opp-902400000 { - opp-hz = /bits/ 64 <902400000>; - opp-peak-kBps = <2188000 9216000>; - }; - - cpu4_opp9: opp-979200000 { - opp-hz = /bits/ 64 <979200000>; - opp-peak-kBps = <2188000 9216000>; - }; - - cpu4_opp10: opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - opp-peak-kBps = <3072000 9216000>; - }; - - cpu4_opp11: opp-1132800000 { - opp-hz = /bits/ 64 <1132800000>; - opp-peak-kBps = <3072000 11980800>; - }; - - cpu4_opp12: opp-1209600000 { - opp-hz = /bits/ 64 <1209600000>; - opp-peak-kBps = <4068000 11980800>; - }; - - cpu4_opp13: opp-1286400000 { - opp-hz = /bits/ 64 <1286400000>; - opp-peak-kBps = <4068000 11980800>; - }; - - cpu4_opp14: opp-1363200000 { - opp-hz = /bits/ 64 <1363200000>; - opp-peak-kBps = <4068000 15052800>; - }; - - cpu4_opp15: opp-1459200000 { - opp-hz = /bits/ 64 <1459200000>; - opp-peak-kBps = <4068000 15052800>; - }; - - cpu4_opp16: opp-1536000000 { - opp-hz = /bits/ 64 <1536000000>; - opp-peak-kBps = <5412000 15052800>; - }; - - cpu4_opp17: opp-1612800000 { - opp-hz = /bits/ 64 <1612800000>; - opp-peak-kBps = <5412000 15052800>; - }; - - cpu4_opp18: opp-1689600000 { - opp-hz = /bits/ 64 <1689600000>; - opp-peak-kBps = <5412000 19353600>; - }; - - cpu4_opp19: opp-1766400000 { - opp-hz = /bits/ 64 <1766400000>; - opp-peak-kBps = <6220000 19353600>; - }; - - cpu4_opp20: opp-1843200000 { - opp-hz = /bits/ 64 <1843200000>; - opp-peak-kBps = <6220000 19353600>; - }; - - cpu4_opp21: opp-1920000000 { - opp-hz = /bits/ 64 <1920000000>; - opp-peak-kBps = <7216000 19353600>; - }; - - cpu4_opp22: opp-1996800000 { - opp-hz = /bits/ 64 <1996800000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp23: opp-2092800000 { - opp-hz = /bits/ 64 <2092800000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp24: opp-2169600000 { - opp-hz = /bits/ 64 <2169600000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp25: opp-2246400000 { - opp-hz = /bits/ 64 <2246400000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp26: opp-2323200000 { - opp-hz = /bits/ 64 <2323200000>; - opp-peak-kBps = <7216000 20889600>; - }; - - cpu4_opp27: opp-2400000000 { - opp-hz = /bits/ 64 <2400000000>; - opp-peak-kBps = <7216000 22425600>; - }; - - cpu4_opp28: opp-2476800000 { - opp-hz = /bits/ 64 <2476800000>; - opp-peak-kBps = <7216000 22425600>; - }; - - cpu4_opp29: opp-2553600000 { - opp-hz = /bits/ 64 <2553600000>; - opp-peak-kBps = <7216000 22425600>; - }; - - cpu4_opp30: opp-2649600000 { - opp-hz = /bits/ 64 <2649600000>; - opp-peak-kBps = <7216000 22425600>; - }; - - cpu4_opp31: opp-2745600000 { - opp-hz = /bits/ 64 <2745600000>; - opp-peak-kBps = <7216000 25497600>; - }; - - cpu4_opp32: opp-2803200000 { - opp-hz = /bits/ 64 <2803200000>; - opp-peak-kBps = <7216000 25497600>; - }; - }; - - dsi_opp_table: opp-table-dsi { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-180000000 { - opp-hz = /bits/ 64 <180000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-275000000 { - opp-hz = /bits/ 64 <275000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-328580000 { - opp-hz = /bits/ 64 <328580000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-358000000 { - opp-hz = /bits/ 64 <358000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - qspi_opp_table: opp-table-qspi { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - qup_opp_table: opp-table-qup { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-128000000 { - opp-hz = /bits/ 64 <128000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = ; - }; - - psci: psci { - compatible = "arm,psci-1.0"; - method = "smc"; - - CPU_PD0: power-domain-cpu0 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD1: power-domain-cpu1 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD2: power-domain-cpu2 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD3: power-domain-cpu3 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; - }; - - CPU_PD4: power-domain-cpu4 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CPU_PD5: power-domain-cpu5 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CPU_PD6: power-domain-cpu6 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CPU_PD7: power-domain-cpu7 { - #power-domain-cells = <0>; - power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; - }; - - CLUSTER_PD: power-domain-cluster { - #power-domain-cells = <0>; - domain-idle-states = <&CLUSTER_SLEEP_0>; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hyp_mem: hyp-mem@85700000 { - reg = <0 0x85700000 0 0x600000>; - no-map; - }; - - xbl_mem: xbl-mem@85e00000 { - reg = <0 0x85e00000 0 0x100000>; - no-map; - }; - - aop_mem: aop-mem@85fc0000 { - reg = <0 0x85fc0000 0 0x20000>; - no-map; - }; - - aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 { - compatible = "qcom,cmd-db"; - reg = <0x0 0x85fe0000 0 0x20000>; - no-map; - }; - - smem@86000000 { - compatible = "qcom,smem"; - reg = <0x0 0x86000000 0 0x200000>; - no-map; - hwlocks = <&tcsr_mutex 3>; - }; - - tz_mem: tz@86200000 { - reg = <0 0x86200000 0 0x2d00000>; - no-map; - }; - - rmtfs_mem: rmtfs@88f00000 { - compatible = "qcom,rmtfs-mem"; - reg = <0 0x88f00000 0 0x200000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = ; - }; - - qseecom_mem: qseecom@8ab00000 { - reg = <0 0x8ab00000 0 0x1400000>; - no-map; - }; - - camera_mem: camera-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x500000>; - no-map; - }; - - ipa_fw_mem: ipa-fw@8c400000 { - reg = <0 0x8c400000 0 0x10000>; - no-map; - }; - - ipa_gsi_mem: ipa-gsi@8c410000 { - reg = <0 0x8c410000 0 0x5000>; - no-map; - }; - - gpu_mem: gpu@8c415000 { - reg = <0 0x8c415000 0 0x2000>; - no-map; - }; - - adsp_mem: adsp@8c500000 { - reg = <0 0x8c500000 0 0x1a00000>; - no-map; - }; - - wlan_msa_mem: wlan-msa@8df00000 { - reg = <0 0x8df00000 0 0x100000>; - no-map; - }; - - mpss_region: mpss@8e000000 { - reg = <0 0x8e000000 0 0x7800000>; - no-map; - }; - - venus_mem: venus@95800000 { - reg = <0 0x95800000 0 0x500000>; - no-map; - }; - - cdsp_mem: cdsp@95d00000 { - reg = <0 0x95d00000 0 0x800000>; - no-map; - }; - - mba_region: mba@96500000 { - reg = <0 0x96500000 0 0x200000>; - no-map; - }; - - slpi_mem: slpi@96700000 { - reg = <0 0x96700000 0 0x1400000>; - no-map; - }; - - spss_mem: spss@97b00000 { - reg = <0 0x97b00000 0 0x100000>; - no-map; - }; - - mdata_mem: mpss-metadata { - alloc-ranges = <0 0xa0000000 0 0x20000000>; - size = <0 0x4000>; - no-map; - }; - - fastrpc_mem: fastrpc { - compatible = "shared-dma-pool"; - alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; - alignment = <0x0 0x400000>; - size = <0x0 0x1000000>; - reusable; - }; - }; - - adsp_pas: remoteproc-adsp { - compatible = "qcom,sdm845-adsp-pas"; - - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - memory-region = <&adsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - label = "lpass"; - qcom,remote-pid = <2>; - mboxes = <&apss_shared 8>; - - apr { - compatible = "qcom,apr-v2"; - qcom,glink-channels = "apr_audio_svc"; - qcom,domain = ; - #address-cells = <1>; - #size-cells = <0>; - qcom,intents = <512 20>; - - service@3 { - reg = ; - compatible = "qcom,q6core"; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - }; - - q6afe: service@4 { - compatible = "qcom,q6afe"; - reg = ; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - q6afedai: dais { - compatible = "qcom,q6afe-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - }; - }; - - q6asm: service@7 { - compatible = "qcom,q6asm"; - reg = ; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - q6asmdai: dais { - compatible = "qcom,q6asm-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - iommus = <&apps_smmu 0x1821 0x0>; - }; - }; - - q6adm: service@8 { - compatible = "qcom,q6adm"; - reg = ; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - q6routing: routing { - compatible = "qcom,q6adm-routing"; - #sound-dai-cells = <0>; - }; - }; - }; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1823 0x0>; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1824 0x0>; - }; - }; - }; - }; - - cdsp_pas: remoteproc-cdsp { - compatible = "qcom,sdm845-cdsp-pas"; - - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - memory-region = <&cdsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&cdsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - label = "turing"; - qcom,remote-pid = <5>; - mboxes = <&apss_shared 4>; - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "cdsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x1401 0x30>; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x1402 0x30>; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1403 0x30>; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1404 0x30>; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1405 0x30>; - }; - - compute-cb@6 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; - iommus = <&apps_smmu 0x1406 0x30>; - }; - - compute-cb@7 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <7>; - iommus = <&apps_smmu 0x1407 0x30>; - }; - - compute-cb@8 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <8>; - iommus = <&apps_smmu 0x1408 0x30>; - }; - }; - }; - }; - - smp2p-cdsp { - compatible = "qcom,smp2p"; - qcom,smem = <94>, <432>; - - interrupts = ; - - mboxes = <&apss_shared 6>; - - qcom,local-pid = <0>; - qcom,remote-pid = <5>; - - cdsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - cdsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-lpass { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; - - interrupts = ; - - mboxes = <&apss_shared 10>; - - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-mpss { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; - interrupts = ; - mboxes = <&apss_shared 14>; - qcom,local-pid = <0>; - qcom,remote-pid = <1>; - - modem_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - modem_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - ipa_smp2p_out: ipa-ap-to-modem { - qcom,entry-name = "ipa"; - #qcom,smem-state-cells = <1>; - }; - - ipa_smp2p_in: ipa-modem-to-ap { - qcom,entry-name = "ipa"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-slpi { - compatible = "qcom,smp2p"; - qcom,smem = <481>, <430>; - interrupts = ; - mboxes = <&apss_shared 26>; - qcom,local-pid = <0>; - qcom,remote-pid = <3>; - - slpi_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - slpi_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - soc: soc@0 { - #address-cells = <2>; - #size-cells = <2>; - ranges = <0 0 0 0 0x10 0>; - dma-ranges = <0 0 0 0 0x10 0>; - compatible = "simple-bus"; - - gcc: clock-controller@100000 { - compatible = "qcom,gcc-sdm845"; - reg = <0 0x00100000 0 0x1f0000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, - <&sleep_clk>, - <&pcie0_phy>, - <&pcie1_phy>; - clock-names = "bi_tcxo", - "bi_tcxo_ao", - "sleep_clk", - "pcie_0_pipe_clk", - "pcie_1_pipe_clk"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - power-domains = <&rpmhpd SDM845_CX>; - }; - - qfprom@784000 { - compatible = "qcom,sdm845-qfprom", "qcom,qfprom"; - reg = <0 0x00784000 0 0x8ff>; - #address-cells = <1>; - #size-cells = <1>; - - qusb2p_hstx_trim: hstx-trim-primary@1eb { - reg = <0x1eb 0x1>; - bits = <1 4>; - }; - - qusb2s_hstx_trim: hstx-trim-secondary@1eb { - reg = <0x1eb 0x2>; - bits = <6 4>; - }; - }; - - rng: rng@793000 { - compatible = "qcom,prng-ee"; - reg = <0 0x00793000 0 0x1000>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; - clock-names = "core"; - }; - - gpi_dma0: dma-controller@800000 { - #dma-cells = <3>; - compatible = "qcom,sdm845-gpi-dma"; - reg = <0 0x00800000 0 0x60000>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - ; - dma-channels = <13>; - dma-channel-mask = <0xfa>; - iommus = <&apps_smmu 0x0016 0x0>; - status = "disabled"; - }; - - qupv3_id_0: geniqup@8c0000 { - compatible = "qcom,geni-se-qup"; - reg = <0 0x008c0000 0 0x6000>; - clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - iommus = <&apps_smmu 0x3 0x0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core"; - status = "disabled"; - - i2c0: i2c@880000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00880000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c0_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, - <&gpi_dma0 1 0 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi0: spi@880000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00880000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi0_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, - <&gpi_dma0 1 0 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart0: serial@880000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00880000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart0_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c1: i2c@884000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00884000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c1_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, - <&gpi_dma0 1 1 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi1: spi@884000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00884000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi1_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, - <&gpi_dma0 1 1 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart1: serial@884000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00884000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart1_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c2: i2c@888000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00888000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c2_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, - <&gpi_dma0 1 2 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi2: spi@888000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00888000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi2_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, - <&gpi_dma0 1 2 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart2: serial@888000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00888000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart2_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c3: i2c@88c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x0088c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c3_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, - <&gpi_dma0 1 3 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi3: spi@88c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x0088c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi3_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, - <&gpi_dma0 1 3 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart3: serial@88c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x0088c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart3_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c4: i2c@890000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00890000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c4_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, - <&gpi_dma0 1 4 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi4: spi@890000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00890000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi4_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, - <&gpi_dma0 1 4 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart4: serial@890000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00890000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart4_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c5: i2c@894000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00894000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c5_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, - <&gpi_dma0 1 5 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi5: spi@894000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00894000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi5_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, - <&gpi_dma0 1 5 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart5: serial@894000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00894000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart5_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c6: i2c@898000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00898000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c6_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>, - <&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, - <&gpi_dma0 1 6 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi6: spi@898000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00898000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi6_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, - <&gpi_dma0 1 6 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart6: serial@898000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00898000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart6_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c7: i2c@89c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x0089c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c7_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - spi7: spi@89c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x0089c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi7_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, - <&gpi_dma0 1 7 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart7: serial@89c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x0089c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart7_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - }; - - gpi_dma1: dma-controller@a00000 { - #dma-cells = <3>; - compatible = "qcom,sdm845-gpi-dma"; - reg = <0 0x00a00000 0 0x60000>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - ; - dma-channels = <13>; - dma-channel-mask = <0xfa>; - iommus = <&apps_smmu 0x06d6 0x0>; - status = "disabled"; - }; - - qupv3_id_1: geniqup@ac0000 { - compatible = "qcom,geni-se-qup"; - reg = <0 0x00ac0000 0 0x6000>; - clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - iommus = <&apps_smmu 0x6c3 0x0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core"; - status = "disabled"; - - i2c8: i2c@a80000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a80000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c8_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, - <&gpi_dma1 1 0 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi8: spi@a80000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a80000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi8_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, - <&gpi_dma1 1 0 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart8: serial@a80000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a80000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart8_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c9: i2c@a84000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a84000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c9_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, - <&gpi_dma1 1 1 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi9: spi@a84000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a84000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi9_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, - <&gpi_dma1 1 1 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart9: serial@a84000 { - compatible = "qcom,geni-debug-uart"; - reg = <0 0x00a84000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart9_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c10: i2c@a88000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a88000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c10_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, - <&gpi_dma1 1 2 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi10: spi@a88000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a88000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi10_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, - <&gpi_dma1 1 2 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart10: serial@a88000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a88000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart10_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c11: i2c@a8c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a8c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c11_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, - <&gpi_dma1 1 3 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi11: spi@a8c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a8c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi11_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, - <&gpi_dma1 1 3 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart11: serial@a8c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a8c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart11_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c12: i2c@a90000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a90000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c12_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, - <&gpi_dma1 1 4 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi12: spi@a90000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a90000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi12_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, - <&gpi_dma1 1 4 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart12: serial@a90000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a90000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart12_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c13: i2c@a94000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a94000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c13_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, - <&gpi_dma1 1 5 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi13: spi@a94000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a94000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi13_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, - <&gpi_dma1 1 5 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart13: serial@a94000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a94000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart13_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c14: i2c@a98000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a98000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c14_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, - <&gpi_dma1 1 6 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi14: spi@a98000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a98000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi14_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, - <&gpi_dma1 1 6 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart14: serial@a98000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a98000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart14_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c15: i2c@a9c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a9c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c15_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>, - <&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, - <&gpi_dma1 1 7 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - }; - - spi15: spi@a9c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a9c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi15_default>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, - <&gpi_dma1 1 7 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart15: serial@a9c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a9c000 0 0x4000>; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart15_default>; - interrupts = ; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - }; - - llcc: system-cache-controller@1100000 { - compatible = "qcom,sdm845-llcc"; - reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>, - <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>, - <0 0x01300000 0 0x50000>; - reg-names = "llcc0_base", "llcc1_base", "llcc2_base", - "llcc3_base", "llcc_broadcast_base"; - interrupts = ; - }; - - dma@10a2000 { - compatible = "qcom,sdm845-dcc", "qcom,dcc"; - reg = <0x0 0x010a2000 0x0 0x1000>, - <0x0 0x010ae000 0x0 0x2000>; - }; - - pmu@114a000 { - compatible = "qcom,sdm845-llcc-bwmon"; - reg = <0 0x0114a000 0 0x1000>; - interrupts = ; - interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>; - - operating-points-v2 = <&llcc_bwmon_opp_table>; - - llcc_bwmon_opp_table: opp-table { - compatible = "operating-points-v2"; - - /* - * The interconnect path bandwidth taken from - * cpu4_opp_table bandwidth for gladiator_noc-mem_noc - * interconnect. This also matches the - * bandwidth table of qcom,llccbw (qcom,bw-tbl, - * bus width: 4 bytes) from msm-4.9 downstream - * kernel. - */ - opp-0 { - opp-peak-kBps = <800000>; - }; - opp-1 { - opp-peak-kBps = <1804000>; - }; - opp-2 { - opp-peak-kBps = <3072000>; - }; - opp-3 { - opp-peak-kBps = <5412000>; - }; - opp-4 { - opp-peak-kBps = <7216000>; - }; - }; - }; - - pmu@1436400 { - compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon"; - reg = <0 0x01436400 0 0x600>; - interrupts = ; - interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; - - operating-points-v2 = <&cpu_bwmon_opp_table>; - - cpu_bwmon_opp_table: opp-table { - compatible = "operating-points-v2"; - - /* - * The interconnect path bandwidth taken from - * cpu4_opp_table bandwidth for OSM L3 - * interconnect. This also matches the OSM L3 - * from bandwidth table of qcom,cpu4-l3lat-mon - * (qcom,core-dev-table, bus width: 16 bytes) - * from msm-4.9 downstream kernel. - */ - opp-0 { - opp-peak-kBps = <4800000>; - }; - opp-1 { - opp-peak-kBps = <9216000>; - }; - opp-2 { - opp-peak-kBps = <15052800>; - }; - opp-3 { - opp-peak-kBps = <20889600>; - }; - opp-4 { - opp-peak-kBps = <25497600>; - }; - }; - }; - - pcie0: pci@1c00000 { - compatible = "qcom,pcie-sdm845"; - reg = <0 0x01c00000 0 0x2000>, - <0 0x60000000 0 0xf1d>, - <0 0x60000f20 0 0xa8>, - <0 0x60100000 0 0x100000>, - <0 0x01c07000 0 0x1000>; - reg-names = "parf", "dbi", "elbi", "config", "mhi"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>; - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a", - "tbu"; - - iommu-map = <0x0 &apps_smmu 0x1c10 0x1>, - <0x100 &apps_smmu 0x1c11 0x1>, - <0x200 &apps_smmu 0x1c12 0x1>, - <0x300 &apps_smmu 0x1c13 0x1>, - <0x400 &apps_smmu 0x1c14 0x1>, - <0x500 &apps_smmu 0x1c15 0x1>, - <0x600 &apps_smmu 0x1c16 0x1>, - <0x700 &apps_smmu 0x1c17 0x1>, - <0x800 &apps_smmu 0x1c18 0x1>, - <0x900 &apps_smmu 0x1c19 0x1>, - <0xa00 &apps_smmu 0x1c1a 0x1>, - <0xb00 &apps_smmu 0x1c1b 0x1>, - <0xc00 &apps_smmu 0x1c1c 0x1>, - <0xd00 &apps_smmu 0x1c1d 0x1>, - <0xe00 &apps_smmu 0x1c1e 0x1>, - <0xf00 &apps_smmu 0x1c1f 0x1>; - - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "pci"; - - power-domains = <&gcc PCIE_0_GDSC>; - - phys = <&pcie0_phy>; - phy-names = "pciephy"; - - status = "disabled"; - }; - - pcie0_phy: phy@1c06000 { - compatible = "qcom,sdm845-qmp-pcie-phy"; - reg = <0 0x01c06000 0 0x1000>; - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>, - <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "aux", - "cfg_ahb", - "ref", - "refgen", - "pipe"; - - clock-output-names = "pcie_0_pipe_clk"; - #clock-cells = <0>; - - #phy-cells = <0>; - - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "phy"; - - assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - assigned-clock-rates = <100000000>; - - status = "disabled"; - }; - - pcie1: pci@1c08000 { - compatible = "qcom,pcie-sdm845"; - reg = <0 0x01c08000 0 0x2000>, - <0 0x40000000 0 0xf1d>, - <0 0x40000f20 0 0xa8>, - <0 0x40100000 0 0x100000>, - <0 0x01c0c000 0 0x1000>; - reg-names = "parf", "dbi", "elbi", "config", "mhi"; - device_type = "pci"; - linux,pci-domain = <1>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - - interrupts = ; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a", - "ref", - "tbu"; - - assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; - assigned-clock-rates = <19200000>; - - iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, - <0x100 &apps_smmu 0x1c01 0x1>, - <0x200 &apps_smmu 0x1c02 0x1>, - <0x300 &apps_smmu 0x1c03 0x1>, - <0x400 &apps_smmu 0x1c04 0x1>, - <0x500 &apps_smmu 0x1c05 0x1>, - <0x600 &apps_smmu 0x1c06 0x1>, - <0x700 &apps_smmu 0x1c07 0x1>, - <0x800 &apps_smmu 0x1c08 0x1>, - <0x900 &apps_smmu 0x1c09 0x1>, - <0xa00 &apps_smmu 0x1c0a 0x1>, - <0xb00 &apps_smmu 0x1c0b 0x1>, - <0xc00 &apps_smmu 0x1c0c 0x1>, - <0xd00 &apps_smmu 0x1c0d 0x1>, - <0xe00 &apps_smmu 0x1c0e 0x1>, - <0xf00 &apps_smmu 0x1c0f 0x1>; - - resets = <&gcc GCC_PCIE_1_BCR>; - reset-names = "pci"; - - power-domains = <&gcc PCIE_1_GDSC>; - - phys = <&pcie1_phy>; - phy-names = "pciephy"; - - status = "disabled"; - }; - - pcie1_phy: phy@1c0a000 { - compatible = "qcom,sdm845-qhp-pcie-phy"; - reg = <0 0x01c0a000 0 0x2000>; - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>, - <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "aux", - "cfg_ahb", - "ref", - "refgen", - "pipe"; - - clock-output-names = "pcie_1_pipe_clk"; - #clock-cells = <0>; - - #phy-cells = <0>; - - resets = <&gcc GCC_PCIE_1_PHY_BCR>; - reset-names = "phy"; - - assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - assigned-clock-rates = <100000000>; - - status = "disabled"; - }; - - mem_noc: interconnect@1380000 { - compatible = "qcom,sdm845-mem-noc"; - reg = <0 0x01380000 0 0x27200>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - dc_noc: interconnect@14e0000 { - compatible = "qcom,sdm845-dc-noc"; - reg = <0 0x014e0000 0 0x400>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - config_noc: interconnect@1500000 { - compatible = "qcom,sdm845-config-noc"; - reg = <0 0x01500000 0 0x5080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system_noc: interconnect@1620000 { - compatible = "qcom,sdm845-system-noc"; - reg = <0 0x01620000 0 0x18080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - aggre1_noc: interconnect@16e0000 { - compatible = "qcom,sdm845-aggre1-noc"; - reg = <0 0x016e0000 0 0x15080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - aggre2_noc: interconnect@1700000 { - compatible = "qcom,sdm845-aggre2-noc"; - reg = <0 0x01700000 0 0x1f300>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - mmss_noc: interconnect@1740000 { - compatible = "qcom,sdm845-mmss-noc"; - reg = <0 0x01740000 0 0x1c100>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,sdm845-ufshc", "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x2500>, - <0 0x01d90000 0 0x8000>; - reg-names = "std", "ice"; - interrupts = ; - phys = <&ufs_mem_phy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - power-domains = <&gcc UFS_PHY_GDSC>; - #reset-cells = <1>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; - - iommus = <&apps_smmu 0x100 0xf>; - - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk", - "ice_core_clk"; - clocks = - <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, - <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>, - <75000000 300000000>; - - interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; - interconnect-names = "ufs-ddr", "cpu-ufs"; - - status = "disabled"; - }; - - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sdm845-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - clock-names = "ref", - "ref_aux"; - clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - status = "disabled"; - - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; - }; - - cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; - reg = <0 0x01dc4000 0 0x24000>; - interrupts = ; - clocks = <&rpmhcc RPMH_CE_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - qcom,controlled-remotely; - iommus = <&apps_smmu 0x704 0x1>, - <&apps_smmu 0x706 0x1>, - <&apps_smmu 0x714 0x1>, - <&apps_smmu 0x716 0x1>; - }; - - crypto: crypto@1dfa000 { - compatible = "qcom,crypto-v5.4"; - reg = <0 0x01dfa000 0 0x6000>; - clocks = <&gcc GCC_CE1_AHB_CLK>, - <&gcc GCC_CE1_AXI_CLK>, - <&rpmhcc RPMH_CE_CLK>; - clock-names = "iface", "bus", "core"; - dmas = <&cryptobam 6>, <&cryptobam 7>; - dma-names = "rx", "tx"; - iommus = <&apps_smmu 0x704 0x1>, - <&apps_smmu 0x706 0x1>, - <&apps_smmu 0x714 0x1>, - <&apps_smmu 0x716 0x1>; - }; - - ipa: ipa@1e40000 { - compatible = "qcom,sdm845-ipa"; - - iommus = <&apps_smmu 0x720 0x0>, - <&apps_smmu 0x722 0x0>; - reg = <0 0x01e40000 0 0x7000>, - <0 0x01e47000 0 0x2000>, - <0 0x01e04000 0 0x2c000>; - reg-names = "ipa-reg", - "ipa-shared", - "gsi"; - - interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, - <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, - <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ipa", - "gsi", - "ipa-clock-query", - "ipa-setup-ready"; - - clocks = <&rpmhcc RPMH_IPA_CLK>; - clock-names = "core"; - - interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>, - <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; - interconnect-names = "memory", - "imem", - "config"; - - qcom,smem-states = <&ipa_smp2p_out 0>, - <&ipa_smp2p_out 1>; - qcom,smem-state-names = "ipa-clock-enabled-valid", - "ipa-clock-enabled"; - - status = "disabled"; - }; - - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0 0x01f40000 0 0x20000>; - #hwlock-cells = <1>; - }; - - tcsr_regs_1: syscon@1f60000 { - compatible = "qcom,sdm845-tcsr", "syscon"; - reg = <0 0x01f60000 0 0x20000>; - }; - - tlmm: pinctrl@3400000 { - compatible = "qcom,sdm845-pinctrl"; - reg = <0 0x03400000 0 0xc00000>; - interrupts = ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 151>; - wakeup-parent = <&pdc_intc>; - - cci0_default: cci0-default-state { - /* SDA, SCL */ - pins = "gpio17", "gpio18"; - function = "cci_i2c"; - - bias-pull-up; - drive-strength = <2>; /* 2 mA */ - }; - - cci0_sleep: cci0-sleep-state { - /* SDA, SCL */ - pins = "gpio17", "gpio18"; - function = "cci_i2c"; - - drive-strength = <2>; /* 2 mA */ - bias-pull-down; - }; - - cci1_default: cci1-default-state { - /* SDA, SCL */ - pins = "gpio19", "gpio20"; - function = "cci_i2c"; - - bias-pull-up; - drive-strength = <2>; /* 2 mA */ - }; - - cci1_sleep: cci1-sleep-state { - /* SDA, SCL */ - pins = "gpio19", "gpio20"; - function = "cci_i2c"; - - drive-strength = <2>; /* 2 mA */ - bias-pull-down; - }; - - qspi_clk: qspi-clk-state { - pins = "gpio95"; - function = "qspi_clk"; - }; - - qspi_cs0: qspi-cs0-state { - pins = "gpio90"; - function = "qspi_cs"; - }; - - qspi_cs1: qspi-cs1-state { - pins = "gpio89"; - function = "qspi_cs"; - }; - - qspi_data0: qspi-data0-state { - pins = "gpio91"; - function = "qspi_data"; - }; - - qspi_data1: qspi-data1-state { - pins = "gpio92"; - function = "qspi_data"; - }; - - qspi_data23: qspi-data23-state { - pins = "gpio93", "gpio94"; - function = "qspi_data"; - }; - - qup_i2c0_default: qup-i2c0-default-state { - pins = "gpio0", "gpio1"; - function = "qup0"; - }; - - qup_i2c1_default: qup-i2c1-default-state { - pins = "gpio17", "gpio18"; - function = "qup1"; - }; - - qup_i2c2_default: qup-i2c2-default-state { - pins = "gpio27", "gpio28"; - function = "qup2"; - }; - - qup_i2c3_default: qup-i2c3-default-state { - pins = "gpio41", "gpio42"; - function = "qup3"; - }; - - qup_i2c4_default: qup-i2c4-default-state { - pins = "gpio89", "gpio90"; - function = "qup4"; - }; - - qup_i2c5_default: qup-i2c5-default-state { - pins = "gpio85", "gpio86"; - function = "qup5"; - }; - - qup_i2c6_default: qup-i2c6-default-state { - pins = "gpio45", "gpio46"; - function = "qup6"; - }; - - qup_i2c7_default: qup-i2c7-default-state { - pins = "gpio93", "gpio94"; - function = "qup7"; - }; - - qup_i2c8_default: qup-i2c8-default-state { - pins = "gpio65", "gpio66"; - function = "qup8"; - }; - - qup_i2c9_default: qup-i2c9-default-state { - pins = "gpio6", "gpio7"; - function = "qup9"; - }; - - qup_i2c10_default: qup-i2c10-default-state { - pins = "gpio55", "gpio56"; - function = "qup10"; - }; - - qup_i2c11_default: qup-i2c11-default-state { - pins = "gpio31", "gpio32"; - function = "qup11"; - }; - - qup_i2c12_default: qup-i2c12-default-state { - pins = "gpio49", "gpio50"; - function = "qup12"; - }; - - qup_i2c13_default: qup-i2c13-default-state { - pins = "gpio105", "gpio106"; - function = "qup13"; - }; - - qup_i2c14_default: qup-i2c14-default-state { - pins = "gpio33", "gpio34"; - function = "qup14"; - }; - - qup_i2c15_default: qup-i2c15-default-state { - pins = "gpio81", "gpio82"; - function = "qup15"; - }; - - qup_spi0_default: qup-spi0-default-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "qup0"; - }; - - qup_spi1_default: qup-spi1-default-state { - pins = "gpio17", "gpio18", "gpio19", "gpio20"; - function = "qup1"; - }; - - qup_spi2_default: qup-spi2-default-state { - pins = "gpio27", "gpio28", "gpio29", "gpio30"; - function = "qup2"; - }; - - qup_spi3_default: qup-spi3-default-state { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "qup3"; - }; - - qup_spi4_default: qup-spi4-default-state { - pins = "gpio89", "gpio90", "gpio91", "gpio92"; - function = "qup4"; - }; - - qup_spi5_default: qup-spi5-default-state { - pins = "gpio85", "gpio86", "gpio87", "gpio88"; - function = "qup5"; - }; - - qup_spi6_default: qup-spi6-default-state { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "qup6"; - }; - - qup_spi7_default: qup-spi7-default-state { - pins = "gpio93", "gpio94", "gpio95", "gpio96"; - function = "qup7"; - }; - - qup_spi8_default: qup-spi8-default-state { - pins = "gpio65", "gpio66", "gpio67", "gpio68"; - function = "qup8"; - }; - - qup_spi9_default: qup-spi9-default-state { - pins = "gpio6", "gpio7", "gpio4", "gpio5"; - function = "qup9"; - }; - - qup_spi10_default: qup-spi10-default-state { - pins = "gpio55", "gpio56", "gpio53", "gpio54"; - function = "qup10"; - }; - - qup_spi11_default: qup-spi11-default-state { - pins = "gpio31", "gpio32", "gpio33", "gpio34"; - function = "qup11"; - }; - - qup_spi12_default: qup-spi12-default-state { - pins = "gpio49", "gpio50", "gpio51", "gpio52"; - function = "qup12"; - }; - - qup_spi13_default: qup-spi13-default-state { - pins = "gpio105", "gpio106", "gpio107", "gpio108"; - function = "qup13"; - }; - - qup_spi14_default: qup-spi14-default-state { - pins = "gpio33", "gpio34", "gpio31", "gpio32"; - function = "qup14"; - }; - - qup_spi15_default: qup-spi15-default-state { - pins = "gpio81", "gpio82", "gpio83", "gpio84"; - function = "qup15"; - }; - - qup_uart0_default: qup-uart0-default-state { - qup_uart0_tx: tx-pins { - pins = "gpio2"; - function = "qup0"; - }; - - qup_uart0_rx: rx-pins { - pins = "gpio3"; - function = "qup0"; - }; - }; - - qup_uart1_default: qup-uart1-default-state { - qup_uart1_tx: tx-pins { - pins = "gpio19"; - function = "qup1"; - }; - - qup_uart1_rx: rx-pins { - pins = "gpio20"; - function = "qup1"; - }; - }; - - qup_uart2_default: qup-uart2-default-state { - qup_uart2_tx: tx-pins { - pins = "gpio29"; - function = "qup2"; - }; - - qup_uart2_rx: rx-pins { - pins = "gpio30"; - function = "qup2"; - }; - }; - - qup_uart3_default: qup-uart3-default-state { - qup_uart3_tx: tx-pins { - pins = "gpio43"; - function = "qup3"; - }; - - qup_uart3_rx: rx-pins { - pins = "gpio44"; - function = "qup3"; - }; - }; - - qup_uart3_4pin: qup-uart3-4pin-state { - qup_uart3_4pin_cts: cts-pins { - pins = "gpio41"; - function = "qup3"; - }; - - qup_uart3_4pin_rts_tx: rts-tx-pins { - pins = "gpio42", "gpio43"; - function = "qup3"; - }; - - qup_uart3_4pin_rx: rx-pins { - pins = "gpio44"; - function = "qup3"; - }; - }; - - qup_uart4_default: qup-uart4-default-state { - qup_uart4_tx: tx-pins { - pins = "gpio91"; - function = "qup4"; - }; - - qup_uart4_rx: rx-pins { - pins = "gpio92"; - function = "qup4"; - }; - }; - - qup_uart5_default: qup-uart5-default-state { - qup_uart5_tx: tx-pins { - pins = "gpio87"; - function = "qup5"; - }; - - qup_uart5_rx: rx-pins { - pins = "gpio88"; - function = "qup5"; - }; - }; - - qup_uart6_default: qup-uart6-default-state { - qup_uart6_tx: tx-pins { - pins = "gpio47"; - function = "qup6"; - }; - - qup_uart6_rx: rx-pins { - pins = "gpio48"; - function = "qup6"; - }; - }; - - qup_uart6_4pin: qup-uart6-4pin-state { - qup_uart6_4pin_cts: cts-pins { - pins = "gpio45"; - function = "qup6"; - bias-pull-down; - }; - - qup_uart6_4pin_rts_tx: rts-tx-pins { - pins = "gpio46", "gpio47"; - function = "qup6"; - drive-strength = <2>; - bias-disable; - }; - - qup_uart6_4pin_rx: rx-pins { - pins = "gpio48"; - function = "qup6"; - bias-pull-up; - }; - }; - - qup_uart7_default: qup-uart7-default-state { - qup_uart7_tx: tx-pins { - pins = "gpio95"; - function = "qup7"; - }; - - qup_uart7_rx: rx-pins { - pins = "gpio96"; - function = "qup7"; - }; - }; - - qup_uart8_default: qup-uart8-default-state { - qup_uart8_tx: tx-pins { - pins = "gpio67"; - function = "qup8"; - }; - - qup_uart8_rx: rx-pins { - pins = "gpio68"; - function = "qup8"; - }; - }; - - qup_uart9_default: qup-uart9-default-state { - qup_uart9_tx: tx-pins { - pins = "gpio4"; - function = "qup9"; - }; - - qup_uart9_rx: rx-pins { - pins = "gpio5"; - function = "qup9"; - }; - }; - - qup_uart10_default: qup-uart10-default-state { - qup_uart10_tx: tx-pins { - pins = "gpio53"; - function = "qup10"; - }; - - qup_uart10_rx: rx-pins { - pins = "gpio54"; - function = "qup10"; - }; - }; - - qup_uart11_default: qup-uart11-default-state { - qup_uart11_tx: tx-pins { - pins = "gpio33"; - function = "qup11"; - }; - - qup_uart11_rx: rx-pins { - pins = "gpio34"; - function = "qup11"; - }; - }; - - qup_uart12_default: qup-uart12-default-state { - qup_uart12_tx: tx-pins { - pins = "gpio51"; - function = "qup0"; - }; - - qup_uart12_rx: rx-pins { - pins = "gpio52"; - function = "qup0"; - }; - }; - - qup_uart13_default: qup-uart13-default-state { - qup_uart13_tx: tx-pins { - pins = "gpio107"; - function = "qup13"; - }; - - qup_uart13_rx: rx-pins { - pins = "gpio108"; - function = "qup13"; - }; - }; - - qup_uart14_default: qup-uart14-default-state { - qup_uart14_tx: tx-pins { - pins = "gpio31"; - function = "qup14"; - }; - - qup_uart14_rx: rx-pins { - pins = "gpio32"; - function = "qup14"; - }; - }; - - qup_uart15_default: qup-uart15-default-state { - qup_uart15_tx: tx-pins { - pins = "gpio83"; - function = "qup15"; - }; - - qup_uart15_rx: rx-pins { - pins = "gpio84"; - function = "qup15"; - }; - }; - - quat_mi2s_sleep: quat-mi2s-sleep-state { - pins = "gpio58", "gpio59"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - quat_mi2s_active: quat-mi2s-active-state { - pins = "gpio58", "gpio59"; - function = "qua_mi2s"; - drive-strength = <8>; - bias-disable; - output-high; - }; - - quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state { - pins = "gpio60"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - quat_mi2s_sd0_active: quat-mi2s-sd0-active-state { - pins = "gpio60"; - function = "qua_mi2s"; - drive-strength = <8>; - bias-disable; - }; - - quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state { - pins = "gpio61"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - quat_mi2s_sd1_active: quat-mi2s-sd1-active-state { - pins = "gpio61"; - function = "qua_mi2s"; - drive-strength = <8>; - bias-disable; - }; - - quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state { - pins = "gpio62"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - quat_mi2s_sd2_active: quat-mi2s-sd2-active-state { - pins = "gpio62"; - function = "qua_mi2s"; - drive-strength = <8>; - bias-disable; - }; - - quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state { - pins = "gpio63"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - quat_mi2s_sd3_active: quat-mi2s-sd3-active-state { - pins = "gpio63"; - function = "qua_mi2s"; - drive-strength = <8>; - bias-disable; - }; - }; - - mss_pil: remoteproc@4080000 { - compatible = "qcom,sdm845-mss-pil"; - reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = - <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack", - "shutdown-ack"; - - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, - <&gcc GCC_MSS_SNOC_AXI_CLK>, - <&gcc GCC_MSS_MFAB_AXIS_CLK>, - <&gcc GCC_PRNG_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "bus", "mem", "gpll0_mss", - "snoc_axi", "mnoc_axi", "prng", "xo"; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - resets = <&aoss_reset AOSS_CC_MSS_RESTART>, - <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "mss_restart", "pdc_reset"; - - qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>; - - power-domains = <&rpmhpd SDM845_CX>, - <&rpmhpd SDM845_MX>, - <&rpmhpd SDM845_MSS>; - power-domain-names = "cx", "mx", "mss"; - - status = "disabled"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - - metadata { - memory-region = <&mdata_mem>; - }; - - glink-edge { - interrupts = ; - label = "modem"; - qcom,remote-pid = <1>; - mboxes = <&apss_shared 12>; - }; - }; - - gpucc: clock-controller@5090000 { - compatible = "qcom,sdm845-gpucc"; - reg = <0 0x05090000 0 0x9000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; - clock-names = "bi_tcxo", - "gcc_gpu_gpll0_clk_src", - "gcc_gpu_gpll0_div_clk_src"; - }; - - slpi_pas: remoteproc@5c00000 { - compatible = "qcom,sdm845-slpi-pas"; - reg = <0 0x5c00000 0 0x4000>; - - interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - qcom,qmp = <&aoss_qmp>; - - power-domains = <&rpmhpd SDM845_CX>, - <&rpmhpd SDM845_MX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&slpi_mem>; - - qcom,smem-states = <&slpi_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - label = "dsps"; - qcom,remote-pid = <3>; - mboxes = <&apss_shared 24>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "sdsp"; - qcom,non-secure-domain; - qcom,vmids = ; - memory-region = <&fastrpc_mem>; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@0 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <0>; - }; - }; - }; - }; - - stm@6002000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0 0x06002000 0 0x1000>, - <0 0x16280000 0 0x180000>; - reg-names = "stm-base", "stm-stimulus-base"; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - stm_out: endpoint { - remote-endpoint = - <&funnel0_in7>; - }; - }; - }; - }; - - funnel@6041000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06041000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - funnel0_out: endpoint { - remote-endpoint = - <&merge_funnel_in0>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@7 { - reg = <7>; - funnel0_in7: endpoint { - remote-endpoint = <&stm_out>; - }; - }; - }; - }; - - funnel@6043000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06043000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - funnel2_out: endpoint { - remote-endpoint = - <&merge_funnel_in2>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@5 { - reg = <5>; - funnel2_in5: endpoint { - remote-endpoint = - <&apss_merge_funnel_out>; - }; - }; - }; - }; - - funnel@6045000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06045000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - merge_funnel_out: endpoint { - remote-endpoint = <&etf_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - merge_funnel_in0: endpoint { - remote-endpoint = - <&funnel0_out>; - }; - }; - - port@2 { - reg = <2>; - merge_funnel_in2: endpoint { - remote-endpoint = - <&funnel2_out>; - }; - }; - }; - }; - - replicator@6046000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0 0x06046000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - replicator_out: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - }; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&etf_out>; - }; - }; - }; - }; - - etf@6047000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x06047000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - etf_out: endpoint { - remote-endpoint = - <&replicator_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - etf_in: endpoint { - remote-endpoint = - <&merge_funnel_out>; - }; - }; - }; - }; - - etr@6048000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x06048000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,scatter-gather; - - in-ports { - port { - etr_in: endpoint { - remote-endpoint = - <&replicator_out>; - }; - }; - }; - }; - - etm@7040000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07040000 0 0x1000>; - - cpu = <&CPU0>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm0_out: endpoint { - remote-endpoint = - <&apss_funnel_in0>; - }; - }; - }; - }; - - etm@7140000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07140000 0 0x1000>; - - cpu = <&CPU1>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm1_out: endpoint { - remote-endpoint = - <&apss_funnel_in1>; - }; - }; - }; - }; - - etm@7240000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07240000 0 0x1000>; - - cpu = <&CPU2>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm2_out: endpoint { - remote-endpoint = - <&apss_funnel_in2>; - }; - }; - }; - }; - - etm@7340000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07340000 0 0x1000>; - - cpu = <&CPU3>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm3_out: endpoint { - remote-endpoint = - <&apss_funnel_in3>; - }; - }; - }; - }; - - etm@7440000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07440000 0 0x1000>; - - cpu = <&CPU4>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm4_out: endpoint { - remote-endpoint = - <&apss_funnel_in4>; - }; - }; - }; - }; - - etm@7540000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07540000 0 0x1000>; - - cpu = <&CPU5>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm5_out: endpoint { - remote-endpoint = - <&apss_funnel_in5>; - }; - }; - }; - }; - - etm@7640000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07640000 0 0x1000>; - - cpu = <&CPU6>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm6_out: endpoint { - remote-endpoint = - <&apss_funnel_in6>; - }; - }; - }; - }; - - etm@7740000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07740000 0 0x1000>; - - cpu = <&CPU7>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - - out-ports { - port { - etm7_out: endpoint { - remote-endpoint = - <&apss_funnel_in7>; - }; - }; - }; - }; - - funnel@7800000 { /* APSS Funnel */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x07800000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - apss_funnel_out: endpoint { - remote-endpoint = - <&apss_merge_funnel_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - apss_funnel_in0: endpoint { - remote-endpoint = - <&etm0_out>; - }; - }; - - port@1 { - reg = <1>; - apss_funnel_in1: endpoint { - remote-endpoint = - <&etm1_out>; - }; - }; - - port@2 { - reg = <2>; - apss_funnel_in2: endpoint { - remote-endpoint = - <&etm2_out>; - }; - }; - - port@3 { - reg = <3>; - apss_funnel_in3: endpoint { - remote-endpoint = - <&etm3_out>; - }; - }; - - port@4 { - reg = <4>; - apss_funnel_in4: endpoint { - remote-endpoint = - <&etm4_out>; - }; - }; - - port@5 { - reg = <5>; - apss_funnel_in5: endpoint { - remote-endpoint = - <&etm5_out>; - }; - }; - - port@6 { - reg = <6>; - apss_funnel_in6: endpoint { - remote-endpoint = - <&etm6_out>; - }; - }; - - port@7 { - reg = <7>; - apss_funnel_in7: endpoint { - remote-endpoint = - <&etm7_out>; - }; - }; - }; - }; - - funnel@7810000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x07810000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - apss_merge_funnel_out: endpoint { - remote-endpoint = - <&funnel2_in5>; - }; - }; - }; - - in-ports { - port { - apss_merge_funnel_in: endpoint { - remote-endpoint = - <&apss_funnel_out>; - }; - }; - }; - }; - - sdhc_2: mmc@8804000 { - compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; - reg = <0 0x08804000 0 0x1000>; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "core", "xo"; - iommus = <&apps_smmu 0xa0 0xf>; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&sdhc2_opp_table>; - - status = "disabled"; - - sdhc2_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-9600000 { - opp-hz = /bits/ 64 <9600000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-201500000 { - opp-hz = /bits/ 64 <201500000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - }; - }; - - qspi: spi@88df000 { - compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; - reg = <0 0x088df000 0 0x600>; - iommus = <&apps_smmu 0x160 0x0>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, - <&gcc GCC_QSPI_CORE_CLK>; - clock-names = "iface", "core"; - power-domains = <&rpmhpd SDM845_CX>; - operating-points-v2 = <&qspi_opp_table>; - status = "disabled"; - }; - - slim: slim-ngd@171c0000 { - compatible = "qcom,slim-ngd-v2.1.0"; - reg = <0 0x171c0000 0 0x2c000>; - interrupts = ; - - dmas = <&slimbam 3>, <&slimbam 4>; - dma-names = "rx", "tx"; - - iommus = <&apps_smmu 0x1806 0x0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - lmh_cluster1: lmh@17d70800 { - compatible = "qcom,sdm845-lmh"; - reg = <0 0x17d70800 0 0x400>; - interrupts = ; - cpus = <&CPU4>; - qcom,lmh-temp-arm-millicelsius = <65000>; - qcom,lmh-temp-low-millicelsius = <94500>; - qcom,lmh-temp-high-millicelsius = <95000>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - lmh_cluster0: lmh@17d78800 { - compatible = "qcom,sdm845-lmh"; - reg = <0 0x17d78800 0 0x400>; - interrupts = ; - cpus = <&CPU0>; - qcom,lmh-temp-arm-millicelsius = <65000>; - qcom,lmh-temp-low-millicelsius = <94500>; - qcom,lmh-temp-high-millicelsius = <95000>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - usb_1_hsphy: phy@88e2000 { - compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; - reg = <0 0x088e2000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - - nvmem-cells = <&qusb2p_hstx_trim>; - }; - - usb_2_hsphy: phy@88e3000 { - compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy"; - reg = <0 0x088e3000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - - nvmem-cells = <&qusb2s_hstx_trim>; - }; - - usb_1_qmpphy: phy@88e8000 { - compatible = "qcom,sdm845-qmp-usb3-dp-phy"; - reg = <0 0x088e8000 0 0x3000>; - status = "disabled"; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, - <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; - clock-names = "aux", - "ref", - "com_aux", - "usb3_pipe", - "cfg_ahb"; - - resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; - reset-names = "phy", "common"; - - #clock-cells = <1>; - #phy-cells = <1>; - }; - - usb_2_qmpphy: phy@88eb000 { - compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x18c>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; - - usb_2_ssphy: phy@88eb200 { - reg = <0 0x088eb200 0 0x128>, - <0 0x088eb400 0 0x1fc>, - <0 0x088eb800 0 0x218>, - <0 0x088eb600 0 0x70>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; - }; - - usb_1: usb@a6f8800 { - compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0 0x0a6f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - dma-ranges; - - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <150000000>; - - interrupts = , - , - , - ; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; - - power-domains = <&gcc USB30_PRIM_GDSC>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - - interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; - interconnect-names = "usb-ddr", "apps-usb"; - - usb_1_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0 0x0a600000 0 0xcd00>; - interrupts = ; - iommus = <&apps_smmu 0x740 0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - usb_2: usb@a8f8800 { - compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0 0x0a8f8800 0 0x400>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - dma-ranges; - - clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>; - assigned-clock-rates = <19200000>, <150000000>; - - interrupts = , - , - , - ; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; - - power-domains = <&gcc USB30_SEC_GDSC>; - - resets = <&gcc GCC_USB30_SEC_BCR>; - - interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; - interconnect-names = "usb-ddr", "apps-usb"; - - usb_2_dwc3: usb@a800000 { - compatible = "snps,dwc3"; - reg = <0 0x0a800000 0 0xcd00>; - interrupts = ; - iommus = <&apps_smmu 0x760 0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - venus: video-codec@aa00000 { - compatible = "qcom,sdm845-venus-v2"; - reg = <0 0x0aa00000 0 0xff000>; - interrupts = ; - power-domains = <&videocc VENUS_GDSC>, - <&videocc VCODEC0_GDSC>, - <&videocc VCODEC1_GDSC>, - <&rpmhpd SDM845_CX>; - power-domain-names = "venus", "vcodec0", "vcodec1", "cx"; - operating-points-v2 = <&venus_opp_table>; - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; - clock-names = "core", "iface", "bus", - "vcodec0_core", "vcodec0_bus", - "vcodec1_core", "vcodec1_bus"; - iommus = <&apps_smmu 0x10a0 0x8>, - <&apps_smmu 0x10b0 0x0>; - memory-region = <&venus_mem>; - interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>, - <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>; - interconnect-names = "video-mem", "cpu-cfg"; - - status = "disabled"; - - video-core0 { - compatible = "venus-decoder"; - }; - - video-core1 { - compatible = "venus-encoder"; - }; - - venus_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-320000000 { - opp-hz = /bits/ 64 <320000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-380000000 { - opp-hz = /bits/ 64 <380000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-444000000 { - opp-hz = /bits/ 64 <444000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - - opp-533000097 { - opp-hz = /bits/ 64 <533000097>; - required-opps = <&rpmhpd_opp_turbo>; - }; - }; - }; - - videocc: clock-controller@ab00000 { - compatible = "qcom,sdm845-videocc"; - reg = <0 0x0ab00000 0 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "bi_tcxo"; - #clock-cells = <1>; - #power-domain-cells = <1>; - #reset-cells = <1>; - }; - - camss: camss@acb3000 { - compatible = "qcom,sdm845-camss"; - - reg = <0 0x0acb3000 0 0x1000>, - <0 0x0acba000 0 0x1000>, - <0 0x0acc8000 0 0x1000>, - <0 0x0ac65000 0 0x1000>, - <0 0x0ac66000 0 0x1000>, - <0 0x0ac67000 0 0x1000>, - <0 0x0ac68000 0 0x1000>, - <0 0x0acaf000 0 0x4000>, - <0 0x0acb6000 0 0x4000>, - <0 0x0acc4000 0 0x4000>; - reg-names = "csid0", - "csid1", - "csid2", - "csiphy0", - "csiphy1", - "csiphy2", - "csiphy3", - "vfe0", - "vfe1", - "vfe_lite"; - - interrupts = , - , - , - , - , - , - , - , - , - ; - interrupt-names = "csid0", - "csid1", - "csid2", - "csiphy0", - "csiphy1", - "csiphy2", - "csiphy3", - "vfe0", - "vfe1", - "vfe_lite"; - - power-domains = <&clock_camcc IFE_0_GDSC>, - <&clock_camcc IFE_1_GDSC>, - <&clock_camcc TITAN_TOP_GDSC>; - - clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, - <&clock_camcc CAM_CC_CPAS_AHB_CLK>, - <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, - <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, - <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, - <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, - <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, - <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, - <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, - <&clock_camcc CAM_CC_CSIPHY0_CLK>, - <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, - <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, - <&clock_camcc CAM_CC_CSIPHY1_CLK>, - <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, - <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, - <&clock_camcc CAM_CC_CSIPHY2_CLK>, - <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, - <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, - <&clock_camcc CAM_CC_CSIPHY3_CLK>, - <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, - <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, - <&gcc GCC_CAMERA_AHB_CLK>, - <&gcc GCC_CAMERA_AXI_CLK>, - <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, - <&clock_camcc CAM_CC_SOC_AHB_CLK>, - <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, - <&clock_camcc CAM_CC_IFE_0_CLK>, - <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, - <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, - <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, - <&clock_camcc CAM_CC_IFE_1_CLK>, - <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, - <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, - <&clock_camcc CAM_CC_IFE_LITE_CLK>, - <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, - <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; - clock-names = "camnoc_axi", - "cpas_ahb", - "cphy_rx_src", - "csi0", - "csi0_src", - "csi1", - "csi1_src", - "csi2", - "csi2_src", - "csiphy0", - "csiphy0_timer", - "csiphy0_timer_src", - "csiphy1", - "csiphy1_timer", - "csiphy1_timer_src", - "csiphy2", - "csiphy2_timer", - "csiphy2_timer_src", - "csiphy3", - "csiphy3_timer", - "csiphy3_timer_src", - "gcc_camera_ahb", - "gcc_camera_axi", - "slow_ahb_src", - "soc_ahb", - "vfe0_axi", - "vfe0", - "vfe0_cphy_rx", - "vfe0_src", - "vfe1_axi", - "vfe1", - "vfe1_cphy_rx", - "vfe1_src", - "vfe_lite", - "vfe_lite_cphy_rx", - "vfe_lite_src"; - - iommus = <&apps_smmu 0x0808 0x0>, - <&apps_smmu 0x0810 0x8>, - <&apps_smmu 0x0c08 0x0>, - <&apps_smmu 0x0c10 0x8>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - }; - - port@2 { - reg = <2>; - }; - - port@3 { - reg = <3>; - }; - }; - }; - - cci: cci@ac4a000 { - compatible = "qcom,sdm845-cci", "qcom,msm8996-cci"; - #address-cells = <1>; - #size-cells = <0>; - - reg = <0 0x0ac4a000 0 0x4000>; - interrupts = ; - power-domains = <&clock_camcc TITAN_TOP_GDSC>; - - clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, - <&clock_camcc CAM_CC_SOC_AHB_CLK>, - <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, - <&clock_camcc CAM_CC_CPAS_AHB_CLK>, - <&clock_camcc CAM_CC_CCI_CLK>, - <&clock_camcc CAM_CC_CCI_CLK_SRC>; - clock-names = "camnoc_axi", - "soc_ahb", - "slow_ahb_src", - "cpas_ahb", - "cci", - "cci_src"; - - assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, - <&clock_camcc CAM_CC_CCI_CLK>; - assigned-clock-rates = <80000000>, <37500000>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cci0_default &cci1_default>; - pinctrl-1 = <&cci0_sleep &cci1_sleep>; - - status = "disabled"; - - cci_i2c0: i2c-bus@0 { - reg = <0>; - clock-frequency = <1000000>; - #address-cells = <1>; - #size-cells = <0>; - }; - - cci_i2c1: i2c-bus@1 { - reg = <1>; - clock-frequency = <1000000>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - clock_camcc: clock-controller@ad00000 { - compatible = "qcom,sdm845-camcc"; - reg = <0 0x0ad00000 0 0x10000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "bi_tcxo"; - }; - - mdss: display-subsystem@ae00000 { - compatible = "qcom,sdm845-mdss"; - reg = <0 0x0ae00000 0 0x1000>; - reg-names = "mdss"; - - power-domains = <&dispcc MDSS_GDSC>; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "core"; - - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>, - <&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "mdp0-mem", "mdp1-mem"; - - iommus = <&apps_smmu 0x880 0x8>, - <&apps_smmu 0xc80 0x8>; - - status = "disabled"; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - mdss_mdp: display-controller@ae01000 { - compatible = "qcom,sdm845-dpu"; - reg = <0 0x0ae01000 0 0x8f000>, - <0 0x0aeb0000 0 0x2008>; - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; - - assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - assigned-clock-rates = <19200000>; - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SDM845_CX>; - - interrupt-parent = <&mdss>; - interrupts = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf0_out: endpoint { - remote-endpoint = <&dp_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf1_out: endpoint { - remote-endpoint = <&mdss_dsi0_in>; - }; - }; - - port@2 { - reg = <2>; - dpu_intf2_out: endpoint { - remote-endpoint = <&mdss_dsi1_in>; - }; - }; - }; - - mdp_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_min_svs>; - }; - - opp-171428571 { - opp-hz = /bits/ 64 <171428571>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-344000000 { - opp-hz = /bits/ 64 <344000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-430000000 { - opp-hz = /bits/ 64 <430000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - - mdss_dp: displayport-controller@ae90000 { - status = "disabled"; - compatible = "qcom,sdm845-dp"; - - reg = <0 0x0ae90000 0 0x200>, - <0 0x0ae90200 0 0x200>, - <0 0x0ae90400 0 0x600>, - <0 0x0ae90a00 0 0x600>, - <0 0x0ae91000 0 0x600>; - - interrupt-parent = <&mdss>; - interrupts = <12>; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, - <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, - <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, - <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; - clock-names = "core_iface", "core_aux", "ctrl_link", - "ctrl_link_iface", "stream_pixel"; - assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, - <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, - <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; - phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; - phy-names = "dp"; - - operating-points-v2 = <&dp_opp_table>; - power-domains = <&rpmhpd SDM845_CX>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - dp_in: endpoint { - remote-endpoint = <&dpu_intf0_out>; - }; - }; - - port@1 { - reg = <1>; - dp_out: endpoint { }; - }; - }; - - dp_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-162000000 { - opp-hz = /bits/ 64 <162000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-270000000 { - opp-hz = /bits/ 64 <270000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-540000000 { - opp-hz = /bits/ 64 <540000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-810000000 { - opp-hz = /bits/ 64 <810000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - - mdss_dsi0: dsi@ae94000 { - compatible = "qcom,sdm845-dsi-ctrl", - "qcom,mdss-dsi-ctrl"; - reg = <0 0x0ae94000 0 0x400>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <4>; - - clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, - <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, - <&dispcc DISP_CC_MDSS_PCLK0_CLK>, - <&dispcc DISP_CC_MDSS_ESC0_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>; - clock-names = "byte", - "byte_intf", - "pixel", - "core", - "iface", - "bus"; - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; - - operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SDM845_CX>; - - phys = <&mdss_dsi0_phy>; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdss_dsi0_in: endpoint { - remote-endpoint = <&dpu_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - mdss_dsi0_out: endpoint { - }; - }; - }; - }; - - mdss_dsi0_phy: phy@ae94400 { - compatible = "qcom,dsi-phy-10nm"; - reg = <0 0x0ae94400 0 0x200>, - <0 0x0ae94600 0 0x280>, - <0 0x0ae94a00 0 0x1e0>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; - - #clock-cells = <1>; - #phy-cells = <0>; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - - status = "disabled"; - }; - - mdss_dsi1: dsi@ae96000 { - compatible = "qcom,sdm845-dsi-ctrl", - "qcom,mdss-dsi-ctrl"; - reg = <0 0x0ae96000 0 0x400>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <5>; - - clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, - <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, - <&dispcc DISP_CC_MDSS_PCLK1_CLK>, - <&dispcc DISP_CC_MDSS_ESC1_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AXI_CLK>; - clock-names = "byte", - "byte_intf", - "pixel", - "core", - "iface", - "bus"; - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; - - operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SDM845_CX>; - - phys = <&mdss_dsi1_phy>; - - status = "disabled"; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdss_dsi1_in: endpoint { - remote-endpoint = <&dpu_intf2_out>; - }; - }; - - port@1 { - reg = <1>; - mdss_dsi1_out: endpoint { - }; - }; - }; - }; - - mdss_dsi1_phy: phy@ae96400 { - compatible = "qcom,dsi-phy-10nm"; - reg = <0 0x0ae96400 0 0x200>, - <0 0x0ae96600 0 0x280>, - <0 0x0ae96a00 0 0x10e>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; - - #clock-cells = <1>; - #phy-cells = <0>; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - - status = "disabled"; - }; - }; - - gpu: gpu@5000000 { - compatible = "qcom,adreno-630.2", "qcom,adreno"; - - reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>; - reg-names = "kgsl_3d0_reg_memory", "cx_mem"; - - /* - * Look ma, no clocks! The GPU clocks and power are - * controlled entirely by the GMU - */ - - interrupts = ; - - iommus = <&adreno_smmu 0>; - - operating-points-v2 = <&gpu_opp_table>; - - qcom,gmu = <&gmu>; - - interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>; - interconnect-names = "gfx-mem"; - - status = "disabled"; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-710000000 { - opp-hz = /bits/ 64 <710000000>; - opp-level = ; - opp-peak-kBps = <7216000>; - }; - - opp-675000000 { - opp-hz = /bits/ 64 <675000000>; - opp-level = ; - opp-peak-kBps = <7216000>; - }; - - opp-596000000 { - opp-hz = /bits/ 64 <596000000>; - opp-level = ; - opp-peak-kBps = <6220000>; - }; - - opp-520000000 { - opp-hz = /bits/ 64 <520000000>; - opp-level = ; - opp-peak-kBps = <6220000>; - }; - - opp-414000000 { - opp-hz = /bits/ 64 <414000000>; - opp-level = ; - opp-peak-kBps = <4068000>; - }; - - opp-342000000 { - opp-hz = /bits/ 64 <342000000>; - opp-level = ; - opp-peak-kBps = <2724000>; - }; - - opp-257000000 { - opp-hz = /bits/ 64 <257000000>; - opp-level = ; - opp-peak-kBps = <1648000>; - }; - }; - }; - - adreno_smmu: iommu@5040000 { - compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; - reg = <0 0x05040000 0 0x10000>; - #iommu-cells = <1>; - #global-interrupts = <2>; - interrupts = , - , - , - , - , - , - , - , - , - ; - clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gcc GCC_GPU_CFG_AHB_CLK>; - clock-names = "bus", "iface"; - - power-domains = <&gpucc GPU_CX_GDSC>; - }; - - gmu: gmu@506a000 { - compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; - - reg = <0 0x0506a000 0 0x30000>, - <0 0x0b280000 0 0x10000>, - <0 0x0b480000 0 0x10000>; - reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; - - interrupts = , - ; - interrupt-names = "hfi", "gmu"; - - clocks = <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_CXO_CLK>, - <&gcc GCC_DDRSS_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>; - clock-names = "gmu", "cxo", "axi", "memnoc"; - - power-domains = <&gpucc GPU_CX_GDSC>, - <&gpucc GPU_GX_GDSC>; - power-domain-names = "cx", "gx"; - - iommus = <&adreno_smmu 5>; - - operating-points-v2 = <&gmu_opp_table>; - - status = "disabled"; - - gmu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-level = ; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-level = ; - }; - }; - }; - - dispcc: clock-controller@af00000 { - compatible = "qcom,sdm845-dispcc"; - reg = <0 0x0af00000 0 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>, - <&mdss_dsi1_phy 0>, - <&mdss_dsi1_phy 1>, - <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, - <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; - clock-names = "bi_tcxo", - "gcc_disp_gpll0_clk_src", - "gcc_disp_gpll0_div_clk_src", - "dsi0_phy_pll_out_byteclk", - "dsi0_phy_pll_out_dsiclk", - "dsi1_phy_pll_out_byteclk", - "dsi1_phy_pll_out_dsiclk", - "dp_link_clk_divsel_ten", - "dp_vco_divided_clk_src_mux"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - pdc_intc: interrupt-controller@b220000 { - compatible = "qcom,sdm845-pdc", "qcom,pdc"; - reg = <0 0x0b220000 0 0x30000>; - qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupt-controller; - }; - - pdc_reset: reset-controller@b2e0000 { - compatible = "qcom,sdm845-pdc-global"; - reg = <0 0x0b2e0000 0 0x20000>; - #reset-cells = <1>; - }; - - tsens0: thermal-sensor@c263000 { - compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0 0x0c263000 0 0x1ff>, /* TM */ - <0 0x0c222000 0 0x1ff>; /* SROT */ - #qcom,sensors = <13>; - interrupts = , - ; - interrupt-names = "uplow", "critical"; - #thermal-sensor-cells = <1>; - }; - - tsens1: thermal-sensor@c265000 { - compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0 0x0c265000 0 0x1ff>, /* TM */ - <0 0x0c223000 0 0x1ff>; /* SROT */ - #qcom,sensors = <8>; - interrupts = , - ; - interrupt-names = "uplow", "critical"; - #thermal-sensor-cells = <1>; - }; - - aoss_reset: reset-controller@c2a0000 { - compatible = "qcom,sdm845-aoss-cc"; - reg = <0 0x0c2a0000 0 0x31000>; - #reset-cells = <1>; - }; - - aoss_qmp: power-management@c300000 { - compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; - reg = <0 0x0c300000 0 0x400>; - interrupts = ; - mboxes = <&apss_shared 0>; - - #clock-cells = <0>; - - cx_cdev: cx { - #cooling-cells = <2>; - }; - - ebi_cdev: ebi { - #cooling-cells = <2>; - }; - }; - - sram@c3f0000 { - compatible = "qcom,sdm845-rpmh-stats"; - reg = <0 0x0c3f0000 0 0x400>; - }; - - spmi_bus: spmi@c440000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0 0x0c440000 0 0x1100>, - <0 0x0c600000 0 0x2000000>, - <0 0x0e600000 0 0x100000>, - <0 0x0e700000 0 0xa0000>, - <0 0x0c40a000 0 0x26000>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = ; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - sram@146bf000 { - compatible = "qcom,sdm845-imem", "syscon", "simple-mfd"; - reg = <0 0x146bf000 0 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - - ranges = <0 0 0x146bf000 0x1000>; - - pil-reloc@94c { - compatible = "qcom,pil-reloc-info"; - reg = <0x94c 0xc8>; - }; - }; - - apps_smmu: iommu@15000000 { - compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; - reg = <0 0x15000000 0 0x80000>; - #iommu-cells = <2>; - #global-interrupts = <1>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - }; - - lpasscc: clock-controller@17014000 { - compatible = "qcom,sdm845-lpasscc"; - reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>; - reg-names = "cc", "qdsp6ss"; - #clock-cells = <1>; - status = "disabled"; - }; - - gladiator_noc: interconnect@17900000 { - compatible = "qcom,sdm845-gladiator-noc"; - reg = <0 0x17900000 0 0xd080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - watchdog@17980000 { - compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; - reg = <0 0x17980000 0 0x1000>; - clocks = <&sleep_clk>; - interrupts = ; - }; - - apss_shared: mailbox@17990000 { - compatible = "qcom,sdm845-apss-shared"; - reg = <0 0x17990000 0 0x1000>; - #mbox-cells = <1>; - }; - - apps_rsc: rsc@179c0000 { - label = "apps_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0 0x179c0000 0 0x10000>, - <0 0x179d0000 0 0x10000>, - <0 0x179e0000 0 0x10000>; - reg-names = "drv-0", "drv-1", "drv-2"; - interrupts = , - , - ; - qcom,tcs-offset = <0xd00>; - qcom,drv-id = <2>; - qcom,tcs-config = , - , - , - ; - power-domains = <&CLUSTER_PD>; - - apps_bcm_voter: bcm-voter { - compatible = "qcom,bcm-voter"; - }; - - rpmhcc: clock-controller { - compatible = "qcom,sdm845-rpmh-clk"; - #clock-cells = <1>; - clock-names = "xo"; - clocks = <&xo_board>; - }; - - rpmhpd: power-controller { - compatible = "qcom,sdm845-rpmhpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmhpd_opp_table>; - - rpmhpd_opp_table: opp-table { - compatible = "operating-points-v2"; - - rpmhpd_opp_ret: opp1 { - opp-level = ; - }; - - rpmhpd_opp_min_svs: opp2 { - opp-level = ; - }; - - rpmhpd_opp_low_svs: opp3 { - opp-level = ; - }; - - rpmhpd_opp_svs: opp4 { - opp-level = ; - }; - - rpmhpd_opp_svs_l1: opp5 { - opp-level = ; - }; - - rpmhpd_opp_nom: opp6 { - opp-level = ; - }; - - rpmhpd_opp_nom_l1: opp7 { - opp-level = ; - }; - - rpmhpd_opp_nom_l2: opp8 { - opp-level = ; - }; - - rpmhpd_opp_turbo: opp9 { - opp-level = ; - }; - - rpmhpd_opp_turbo_l1: opp10 { - opp-level = ; - }; - }; - }; - }; - - intc: interrupt-controller@17a00000 { - compatible = "arm,gic-v3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0 0x17a00000 0 0x10000>, /* GICD */ - <0 0x17a60000 0 0x100000>; /* GICR * 8 */ - interrupts = ; - - msi-controller@17a40000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0 0x17a40000 0 0x20000>; - status = "disabled"; - }; - }; - - slimbam: dma-controller@17184000 { - compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; - qcom,controlled-remotely; - reg = <0 0x17184000 0 0x2a000>; - num-channels = <31>; - interrupts = ; - #dma-cells = <1>; - qcom,ee = <1>; - qcom,num-ees = <2>; - iommus = <&apps_smmu 0x1806 0x0>; - }; - - timer@17c90000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0x20000000>; - compatible = "arm,armv7-timer-mem"; - reg = <0 0x17c90000 0 0x1000>; - - frame@17ca0000 { - frame-number = <0>; - interrupts = , - ; - reg = <0x17ca0000 0x1000>, - <0x17cb0000 0x1000>; - }; - - frame@17cc0000 { - frame-number = <1>; - interrupts = ; - reg = <0x17cc0000 0x1000>; - status = "disabled"; - }; - - frame@17cd0000 { - frame-number = <2>; - interrupts = ; - reg = <0x17cd0000 0x1000>; - status = "disabled"; - }; - - frame@17ce0000 { - frame-number = <3>; - interrupts = ; - reg = <0x17ce0000 0x1000>; - status = "disabled"; - }; - - frame@17cf0000 { - frame-number = <4>; - interrupts = ; - reg = <0x17cf0000 0x1000>; - status = "disabled"; - }; - - frame@17d00000 { - frame-number = <5>; - interrupts = ; - reg = <0x17d00000 0x1000>; - status = "disabled"; - }; - - frame@17d10000 { - frame-number = <6>; - interrupts = ; - reg = <0x17d10000 0x1000>; - status = "disabled"; - }; - }; - - osm_l3: interconnect@17d41000 { - compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3"; - reg = <0 0x17d41000 0 0x1400>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; - clock-names = "xo", "alternate"; - - #interconnect-cells = <1>; - }; - - cpufreq_hw: cpufreq@17d43000 { - compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw"; - reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; - reg-names = "freq-domain0", "freq-domain1"; - - interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; - clock-names = "xo", "alternate"; - - #freq-domain-cells = <1>; - #clock-cells = <1>; - }; - - wifi: wifi@18800000 { - compatible = "qcom,wcn3990-wifi"; - status = "disabled"; - reg = <0 0x18800000 0 0x800000>; - reg-names = "membase"; - memory-region = <&wlan_msa_mem>; - clock-names = "cxo_ref_clk_pin"; - clocks = <&rpmhcc RPMH_RF_CLK2>; - interrupts = - , - , - , - , - , - , - , - , - , - , - , - ; - iommus = <&apps_smmu 0x0040 0x1>; - }; - }; - - sound: sound { - }; - - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 1>; - - trips { - cpu0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu0_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu0_crit: cpu-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 2>; - - trips { - cpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu1_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu1_crit: cpu-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 3>; - - trips { - cpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu2_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu2_crit: cpu-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 4>; - - trips { - cpu3_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu3_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu3_crit: cpu-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu4-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 7>; - - trips { - cpu4_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu4_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu4_crit: cpu-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu5-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 8>; - - trips { - cpu5_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu5_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu5_crit: cpu-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu6-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 9>; - - trips { - cpu6_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu6_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu6_crit: cpu-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu7-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 10>; - - trips { - cpu7_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu7_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu7_crit: cpu-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - aoss0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 0>; - - trips { - aoss0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - cluster0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 5>; - - trips { - cluster0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cluster0_crit: cluster0_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cluster1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 6>; - - trips { - cluster1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cluster1_crit: cluster1_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - gpu-top-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 11>; - - trips { - gpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - gpu-bottom-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 12>; - - trips { - gpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - aoss1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 0>; - - trips { - aoss1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - q6-modem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 1>; - - trips { - q6_modem_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - mem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 2>; - - trips { - mem_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 3>; - - trips { - wlan_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - q6-hvx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 4>; - - trips { - q6_hvx_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - camera-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 5>; - - trips { - camera_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - video-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 6>; - - trips { - video_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - - modem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 7>; - - trips { - modem_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; -}; From patchwork Thu Apr 18 17:24:11 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 1925135 X-Patchwork-Delegate: caleb.connolly@linaro.org Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=YjF4Ke07; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=patchwork.ozlabs.org) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4VL4Qr5w28z1yPv for ; Fri, 19 Apr 2024 03:24:52 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 283DC8869D; Thu, 18 Apr 2024 19:24:36 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="YjF4Ke07"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id B5ACD8868D; Thu, 18 Apr 2024 19:24:33 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.2 Received: from mail-wr1-x431.google.com (mail-wr1-x431.google.com [IPv6:2a00:1450:4864:20::431]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id D1E3588690 for ; Thu, 18 Apr 2024 19:24:31 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-wr1-x431.google.com with SMTP id ffacd0b85a97d-344047ac7e4so1440499f8f.0 for ; Thu, 18 Apr 2024 10:24:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1713461071; x=1714065871; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=AKk1HXynJELPsVsKzwXRRlp1cAx2xoVp94ao9pwKbDg=; b=YjF4Ke07v8DvkIA53rER2O5WoRJtYGNHuqJfgR5sNLObhrXZcWJxoYC3SSms0wgRgC 3P9uC4D7K7DroPXUrhXtxk7XE8CJlQJmTfDFHow9Xt8zImtnmdQluolb0VSxgw9Tt3FU 8nssqVigQmzGs8J+13n60QADK5Kyyr5nIzmvZO4N1hR7hXPttI5qpuyEA8PWUSrnmhhN Nie8xco7RVdSIJ0RzUtGCGwdsBxBC/eNuc6TQMIsteA1gvXBHs6rHL4dSsCiTBxdhftS wXu2HNJ/DUl04TegK4q9eXQhxRr67ZG70WV/yqvsA6q1Ad9yeDznA66IvjllnYMX9/g+ KAIQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1713461071; x=1714065871; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=AKk1HXynJELPsVsKzwXRRlp1cAx2xoVp94ao9pwKbDg=; b=Ww3+HwnbUq7QAVM6yVxUhbuQafSHHsqmYNITXUmjtUEVCeRIs7IvMkDrUnxksFzhpI ZWD9xo+2X+zAkHg4LlujMlEuABQiymcr5hlwA2OrQUsS8dVcQr4/FR2nwrJIAIlMnBNP loDXw6BfBfykT3Kn7y4Ndjzi7Oy7cPqj89PPHLthnjpyPvgzb9i4eFL65eywcJc9taBz ezWSborzB7GHRDcCk4YT+6OipVZOD3Rp3fxkZ9qnzqVAh/z/dO/RJ3iz9CWNerL2Vp7j lAEOTRRjTc8DZ06xSkDd3eMhvqQxuanL3w05fYucZWEAEy5vvBQFfP0c70uMJR4fDWvL lWHA== X-Forwarded-Encrypted: i=1; AJvYcCVEQliyXggyAPrLYYMNpdgX+gTXXFFfTxy4QxRYYkH9IWUsw4LH1iMrRLZy4MLmyFVmmV4WVZdQH5GB2SurqcegePF+4Q== X-Gm-Message-State: AOJu0Yyu5PA/LysBdFj8iZKjZv2HOvtpQntfHl24wmbhyvETiktUtzVQ ZJmDoPh2e95aOownqBS8bPpHnnQ6izvfqdrfxQ4ORgsE6GM4ZzI3IbhtgS+xCC0= X-Google-Smtp-Source: AGHT+IEguAvC0r6sF04KTNhvKGiRewVjXgpZun1h1APmpwAMoZCA0gtk1dXG5/mA7kJiCH9MCSFb2A== X-Received: by 2002:a5d:598f:0:b0:34a:3e3a:ffaf with SMTP id n15-20020a5d598f000000b0034a3e3affafmr569437wri.0.1713461071325; Thu, 18 Apr 2024 10:24:31 -0700 (PDT) Received: from lion.localdomain (host-92-17-96-232.as13285.net. [92.17.96.232]) by smtp.gmail.com with ESMTPSA id e32-20020a5d5960000000b0033ec9ddc638sm2301799wri.31.2024.04.18.10.24.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 18 Apr 2024 10:24:30 -0700 (PDT) From: Caleb Connolly Date: Thu, 18 Apr 2024 18:24:11 +0100 Subject: [PATCH 3/3] qcom_defconfig: set SYS_INIT_SP_BSS_OFFSET MIME-Version: 1.0 Message-Id: <20240418-b4-qcom-rbx-fixes-v1-3-e524eb29ae86@linaro.org> References: <20240418-b4-qcom-rbx-fixes-v1-0-e524eb29ae86@linaro.org> In-Reply-To: <20240418-b4-qcom-rbx-fixes-v1-0-e524eb29ae86@linaro.org> To: Neil Armstrong , Sumit Garg , Tom Rini , Marek Vasut , Rayagonda Kokatanur , Ramon Fried , Jorge Ramirez-Ortiz Cc: u-boot-qcom@groups.io, u-boot@lists.denx.de, Caleb Connolly X-Mailer: b4 0.14-dev X-Developer-Signature: v=1; a=openpgp-sha256; l=659; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=+DrL5OT8uZAQkNDq/x40/GExjdlVo4KiZn1LUniI+eA=; b=owGbwMvMwCFYaeA6f6eBkTjjabUkhjTFcK+N4WlrJlnYPfiZ87RcZG2a1eUJlrdDdUJ7EhxeX DzJt9Opo5SFQZCDQVZMkUX8xDLLprWX7TW2L7gAM4eVCWQIAxenAEykz5GRYZfZa+uUFbaPD2q6 /DZIzpzSf9skwHTXnFvBkQZMxzuueTL809/6QOrAt3v3PL1uKfYf8NA3lfqduiXUK/e21Wu/sJS ZDwE= X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Give us lots of room for the appended FDT. Signed-off-by: Caleb Connolly Reviewed-by: Neil Armstrong --- configs/qcom_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index 218a9a769682..7b589f0bf7a7 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -3,8 +3,9 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_POSITION_INDEPENDENT=y CONFIG_ARCH_SNAPDRAGON=y CONFIG_DEFAULT_DEVICE_TREE="qcom/sdm845-db845c" CONFIG_SYS_LOAD_ADDR=0x0 +CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864 CONFIG_BUTTON_CMD=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_BOOTSTD_FULL=y