From patchwork Fri Nov 24 14:18:16 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nuno Sa via B4 Relay X-Patchwork-Id: 1868166 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20201202 header.b=eqMpE9+W; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=147.75.48.161; helo=sy.mirrors.kernel.org; envelope-from=devicetree+bounces-18631-incoming-dt=patchwork.ozlabs.org@vger.kernel.org; receiver=patchwork.ozlabs.org) Received: from sy.mirrors.kernel.org (sy.mirrors.kernel.org [147.75.48.161]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (secp384r1)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4ScHCK2HPPz1yRy for ; Sat, 25 Nov 2023 01:18:37 +1100 (AEDT) Received: from smtp.subspace.kernel.org (wormhole.subspace.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by sy.mirrors.kernel.org (Postfix) with ESMTPS id E1EDEB2154C for ; Fri, 24 Nov 2023 14:18:36 +0000 (UTC) Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 9098F2D615; Fri, 24 Nov 2023 14:18:27 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="eqMpE9+W" X-Original-To: devicetree@vger.kernel.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 371C52D03D; Fri, 24 Nov 2023 14:18:26 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPS id BBEFBC433CA; Fri, 24 Nov 2023 14:18:26 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1700835506; bh=aPHy+qeTdF90rjUwBCivA+w2Kks4lGAc9/2OBXiOdGo=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=eqMpE9+W/iwe5BSU4Ht6GiqSk5BxYYBq+tq1q8p2KHQI8AIS+38OH8iIczA2tk1Td mIlRXsSUQ4hAeVfb2LS47LgDKNuL7QcMn43TnakKdkRy9lT9fDUgUQLvUyzkjckUjw CKsmVqpBpzOTMGHbQIgZGoPUNZ4No2e+OYjVzMSjbioTQk1U/ouTh8aV6T+2bfdwux YDegVFXwWZGTCdtITLeEGABHcosRFS74JmiCWunKQNkA2JEXXzT++rEltl2R5N9qkq Fmb4D8yvyf/VM5I5CIDx9QouZXIbl0Uj2AqjsoHtp5RPVqecEmTWywlicq9jdxu1m9 LjFGtJYwjczRg== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id A4167C624B4; Fri, 24 Nov 2023 14:18:26 +0000 (UTC) From: Nuno Sa via B4 Relay Date: Fri, 24 Nov 2023 15:18:16 +0100 Subject: [PATCH v2 1/2] dt-bindings: hwmon: Add LTC4282 bindings Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231124-ltc4282-support-v2-1-952bf926f83c@analog.com> References: <20231124-ltc4282-support-v2-0-952bf926f83c@analog.com> In-Reply-To: <20231124-ltc4282-support-v2-0-952bf926f83c@analog.com> To: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org Cc: Jean Delvare , Guenter Roeck , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jonathan Corbet , Bartosz Golaszewski , Linus Walleij , Andy Shevchenko X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=ed25519-sha256; t=1700835504; l=7583; i=nuno.sa@analog.com; s=20231116; h=from:subject:message-id; bh=OsmBFs3WX3gV38NkMDwvqrVkUAAW0yysY75GmZvn7xY=; b=AaYiW0WTAAKx7mUkzlCLaxn6Q9O0c5gdLWcEfM47PnPF5O9Xeb9TZAikjqdVHlbnEku1ugrKt iR2uHGxMpAmCHTWi2LY2oryMswM/n72pU7VVzbtmpuGDcWkr86I/Okg X-Developer-Key: i=nuno.sa@analog.com; a=ed25519; pk=3NQwYA013OUYZsmDFBf8rmyyr5iQlxV/9H4/Df83o1E= X-Endpoint-Received: by B4 Relay for nuno.sa@analog.com/20231116 with auth_id=100 X-Original-From: Nuno Sa Reply-To: From: Nuno Sa Add bindings for the LTC4282 High Current Hot Swap Controller with I2C Compatible Monitoring. Signed-off-by: Nuno Sa --- .../devicetree/bindings/hwmon/adi,ltc4282.yaml | 206 +++++++++++++++++++++ MAINTAINERS | 6 + 2 files changed, 212 insertions(+) diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml new file mode 100644 index 000000000000..6c979f70687e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C + +maintainers: + - Nuno Sa + +description: | + Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf + +properties: + compatible: + enum: + - adi,ltc4282 + + reg: + maxItems: 1 + + vdd-supply: true + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + adi,rsense-nano-ohms: + description: Value of the sense resistor. + + adi,vin-mode-microvolt: + description: + Selects operating range for the Undervoltage, Overvoltage and Foldback + pins. Also for the ADC. Should be set to the nominal input voltage. + enum: [3300000, 5000000, 12000000, 24000000] + default: 12000000 + + adi,fet-bad-timeout-ms: + description: + From the moment a FET bad conditions is present, this property selects the + wait time/timeout for a FET-bad fault to be signaled. Setting this to 0, + disables FET bad faults to be reported. + default: 255 + maximum: 255 + + adi,overvoltage-dividers: + description: | + Select which dividers to use for VDD Overvoltage detection. Note that + when the internal dividers are used the threshold is referenced to VDD. + The percentages in the datasheet are misleading since the actual values + to look for are in the "Absolute Maximum Ratings" table in the + "Comparator Inputs" section. In there there's a line for each of the 5%, + 10% and 15% settings with the actual min, typical and max tolerances. + $ref: /schemas/types.yaml#/definitions/string + enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent] + default: 0 + + adi,undervoltage-dividers: + description: | + Select which dividers to use for VDD Overvoltage detection. Note that + when the internal dividers are used the threshold is referenced to VDD. + The percentages in the datasheet are misleading since the actual values + to look for are in the "Absolute Maximum Ratings" table in the + "Comparator Inputs" section. In there there's a line for each of the 5%, + 10% and 15% settings with the actual min, typical and max tolerances. + $ref: /schemas/types.yaml#/definitions/string + enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent] + default: 0 + + adi,current-limit-sense-microvolt: + description: + The current limit sense voltage of the chip is adjustable between + 12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current + on the load. + enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375] + default: 25000 + + adi,overcurrent-retry: + description: + If set, enables the chip to auto-retry 256 timer cycles after an + Overcurrent fault. + type: boolean + + adi,overvoltage-retry-disable: + description: + If set, disables the chip to auto-retry 50ms after an Overvoltage fault. + It's enabled by default. + type: boolean + + adi,undervoltage-retry-disable: + description: + If set, disables the chip to auto-retry 50ms after an Undervoltage fault. + It's enabled by default. + type: boolean + + adi,fault-log-enable: + description: + If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written + to the EEPROM when a fault bit transitions high and hence, will be + available after a power cycle (the chip loads the contents of + the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot). + type: boolean + + adi,gpio-alert: + description: Use the ALERT pin as a GPIO. + type: boolean + + adi,gpio1-mode: + description: Defines the function of the Pin. + $ref: /schemas/types.yaml#/definitions/string + enum: [gpio, power_bad, power_good] + + adi,gpio2-mode: + description: Defines the function of the Pin. + 0 - GPIO Mode. + 1 - Acts as an input pin and it is feeded into the ADC. + 2 - Pulls Low when the MOSFET is dissipating power (stress). + $ref: /schemas/types.yaml#/definitions/string + enum: [gpio, adc_input, stress_fet] + + adi,gpio3-mode: + description: Defines the function of the Pin. + 0 - GPIO Mode. + 1 - Acts as an input pin and it is feeded into the ADC. + $ref: /schemas/types.yaml#/definitions/string + enum: [gpio, adc_input] + + gpio-controller: + description: + This property applies if some of the pins are used as GPIOs. + + '#gpio-cells': + const: 2 + +required: + - compatible + - reg + - adi,rsense-nano-ohms + +dependencies: + adi,alert-as-gpio: [gpio-controller, '#gpio-cells'] + +allOf: + - if: + required: + - adi,gpio1-mode + then: + allOf: + - if: + properties: + adi,gpio1-mode: + const: gpio + then: + dependencies: + adi,gpio1-mode: [gpio-controller, '#gpio-cells'] + - if: + required: + - adi,gpio2-mode + then: + allOf: + - if: + properties: + adi,gpio2-mode: + const: gpio + then: + dependencies: + adi,gpio2-mode: [gpio-controller, '#gpio-cells'] + - if: + required: + - adi,gpio3-mode + then: + allOf: + - if: + properties: + adi,gpio3-mode: + const: gpio + then: + dependencies: + adi,gpio3-mode: [gpio-controller, '#gpio-cells'] + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@50 { + compatible = "adi,ltc4282"; + reg = <0x50>; + adi,rsense-nano-ohms = <500>; + + gpio-controller; + #gpio-cells = <2>; + + adi,gpio1-mode = "power_good"; + adi,gpio2-mode = "gpio"; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 97f51d5ec1cf..4a2b84ea1274 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12629,6 +12629,12 @@ S: Maintained F: Documentation/hwmon/ltc4261.rst F: drivers/hwmon/ltc4261.c +LTC4282 HARDWARE MONITOR DRIVER +M: Nuno Sa +L: linux-hwmon@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml + LTC4306 I2C MULTIPLEXER DRIVER M: Michael Hennerich L: linux-i2c@vger.kernel.org