From patchwork Fri Feb 3 17:46:44 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 1737172 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=RanFkq8s; dkim-atps=neutral Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4P7jm11hgJz23h0 for ; Sat, 4 Feb 2023 04:47:29 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232616AbjBCRr0 (ORCPT ); Fri, 3 Feb 2023 12:47:26 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51572 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232618AbjBCRrU (ORCPT ); Fri, 3 Feb 2023 12:47:20 -0500 Received: from mail-wm1-x32a.google.com (mail-wm1-x32a.google.com [IPv6:2a00:1450:4864:20::32a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9B99BA77AA for ; Fri, 3 Feb 2023 09:47:00 -0800 (PST) Received: by mail-wm1-x32a.google.com with SMTP id j29-20020a05600c1c1d00b003dc52fed235so4474438wms.1 for ; Fri, 03 Feb 2023 09:47:00 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=Y0/8EJx4NPEzlDSnDbn1yVqQ3O77UPSHSnPTpfzx4rU=; b=RanFkq8sZi+UIQnxke3KYSjfAdAYAfEvSW0SGQYz4PE1vjZfyDWGCh/t4wc/8Zpxpu QdtruumgYQvc8+nxu6dDf+eTx9RXPTWKE3ODmXT/1Kgarp7uSbftMkFN3K8SSfF6pcTC C7G9yPXQ4lumujc6C6fO5bX4p/jAAxOWBtF2Sb0uhBovyx2hLyGI8bYsxEhiEsDw5i0A wt2Css1AIGDvAMOCZmK7FJK0rFON35wL0dgX1tSdsRIQDLzeioBsuvDgop4g2dr541xH y9ULA9YwWGOCC1FdShmafo15+EIXcnXg2jW1K82yipgAyHWmuB56olSQ7y7wfWovrYLT i5JA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=Y0/8EJx4NPEzlDSnDbn1yVqQ3O77UPSHSnPTpfzx4rU=; b=rtxc3BrQvRiSJqhgDSSX57NXBc8qHjE1KafpzzI4I3Vejp8Ha2/UcVWgWLb1ksjjc5 lVo/TXarhE8OQXS+dZWAnSt82YEs9nMqR7ptoVPNrzNlvt8aqskNzV8ZrR3zN5XELTfx yJjhxgYqvpde1YYntDeFCeSxdYJCiUKmNq0CQXn/j7Ocon594uDqG3tYDWfruMgDp+ZJ c2PpmKIrtsDvWrG/uYPfS0WmT9Y5c09cy8Ok2e/oMIMpeuJ8yxGDivMhQvc5p0B6rQvz RVGEq6VI+6mFEmSpbN0gr2Wz1vzUl+T6aSHN42Cu7yHZVyX5eI/RjTaPC8lrqqxNFD43 s70w== X-Gm-Message-State: AO0yUKV8t5DhmPrtWwhdVuPLNjlVktbe8UvoVry2ZBsIOu5rWTtXVrmz wQVL3D5ZA7XNEGUQjcsZlbn7Sg== X-Google-Smtp-Source: AK7set8l+Jq6ChUegXRoXhGaJKb4g914R+OcmGF7+ZzeGmGh663xk8fha0uipcR2E+30AI4X1UDUpw== X-Received: by 2002:a7b:cd17:0:b0:3dc:5342:4132 with SMTP id f23-20020a7bcd17000000b003dc53424132mr10710901wmj.4.1675446414531; Fri, 03 Feb 2023 09:46:54 -0800 (PST) Received: from krzk-bin.. ([178.197.216.144]) by smtp.gmail.com with ESMTPSA id w14-20020a05600c474e00b003dfe57f6f61sm2964725wmo.33.2023.02.03.09.46.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 03 Feb 2023 09:46:54 -0800 (PST) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Linus Walleij , Rob Herring , Krzysztof Kozlowski , Srinivas Kandagatla , linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH 1/2] dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS Date: Fri, 3 Feb 2023 18:46:44 +0100 Message-Id: <20230203174645.597053-1-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Add bidings for pin controller in Low Power Audio SubSystem (LPASS). Signed-off-by: Krzysztof Kozlowski --- .../qcom,sm8550-lpass-lpi-pinctrl.yaml | 148 ++++++++++++++++++ 1 file changed, 148 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..5e90051ed314 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8550 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski + - Srinivas Kandagatla + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8550 SoC. + +properties: + compatible: + const: qcom,sm8550-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI pins SLEW registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8550-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8550-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8550-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8550-lpass-lpi-pinctrl"; + reg = <0x06e80000 0x20000>, + <0x0725a000 0x10000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; From patchwork Fri Feb 3 17:46:45 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 1737174 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Authentication-Results: legolas.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=FhxA1nwu; dkim-atps=neutral Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4P7jm84nQvz23h0 for ; Sat, 4 Feb 2023 04:47:36 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232957AbjBCRrf (ORCPT ); Fri, 3 Feb 2023 12:47:35 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51650 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232113AbjBCRrX (ORCPT ); Fri, 3 Feb 2023 12:47:23 -0500 Received: from mail-wm1-x334.google.com (mail-wm1-x334.google.com [IPv6:2a00:1450:4864:20::334]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3688EAA27F for ; Fri, 3 Feb 2023 09:47:03 -0800 (PST) Received: by mail-wm1-x334.google.com with SMTP id q10-20020a1cf30a000000b003db0edfdb74so5923835wmq.1 for ; Fri, 03 Feb 2023 09:47:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=VzUXV5E/65QiwxBrXaEXN2y4vVWhreFvINSEdAk1xTs=; b=FhxA1nwuM+fXkMskZp6KXI/5JgLaGPC0+CLfFaAyVIY9j+yG5YhpvoRVrV1dy/p+rE k9p/rSFFejsKYIu7yrrIYF/HdZ6psNDNx2os2YnNjEe0hMz68tZrkoNo2cdfGXrhqpC3 1NrWP/C2VAS8CvSDodtkyheitGN0T23/NzbVZEZmXRNZfD4U0GkYBvSfA+8v3V8J+JvL kbGAEYJ/wtjCIfxYKb7pezmtnZGHT0gnpt2m411LXAKNxjRtM23gID09ytRlZw5bErDH plNyT8j4eyWDHQnSp6WxpmcP2J33+UPS6qBOnab/V2XWprTKvSRuC9Yvdk7WKGw8gIiL KHdQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=VzUXV5E/65QiwxBrXaEXN2y4vVWhreFvINSEdAk1xTs=; b=7dityoUrE5rojEK+M2UptMA/JWIVWqJGHlwoFOTFRhYCqvoOIi5Kj2Z4/3Qo1T9MrG 8DLfSH+UuC5JHSnTF1WwlFJ2h/Rfox0Hrr6koMtfK5SHuFbNLtAVH6kcT0zDVJZ5JQb6 1xuMRv9VayCPYE9UWkGlwJPTSFvR/g/E0l25k0qG4ZwJr+xQodm3wDhpeUVEOsb2mCdR I5oyatVHHdCuFI2x70xwipqwGEJPtrBa0XuIGE1XTcVCTF5aXHH3NtO00AhyUeYcN56I iQNljpSgepeRLFhmd6emMtw/5/CDZiUocZCytJzuBoggK7gVLd3gb7raZRcoEXzRjUQH UC9w== X-Gm-Message-State: AO0yUKUmw4hKa4tEDsE/jkI0UbsrQyuKU0ohCrRxRoqDR+W3Iid70xZw cI70O0qStZ2kYzNxlFqMC2imvQ== X-Google-Smtp-Source: AK7set+dJn9Xci9D1lDm0nJxvE5eLl4y0RGTOIrAvrY54C+G3HnSLNARC9UtHZNKhmaV2VDlLWtQ/w== X-Received: by 2002:a05:600c:3b89:b0:3dc:19d1:3c13 with SMTP id n9-20020a05600c3b8900b003dc19d13c13mr10244026wms.12.1675446416243; Fri, 03 Feb 2023 09:46:56 -0800 (PST) Received: from krzk-bin.. ([178.197.216.144]) by smtp.gmail.com with ESMTPSA id w14-20020a05600c474e00b003dfe57f6f61sm2964725wmo.33.2023.02.03.09.46.54 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 03 Feb 2023 09:46:55 -0800 (PST) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Linus Walleij , Rob Herring , Krzysztof Kozlowski , Srinivas Kandagatla , linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH 2/2] pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS Date: Fri, 3 Feb 2023 18:46:45 +0100 Message-Id: <20230203174645.597053-2-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230203174645.597053-1-krzysztof.kozlowski@linaro.org> References: <20230203174645.597053-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Add druver for pin controller in Low Power Audio SubSystem (LPASS). The driver is similar to SM8450 LPASS pin controller, with differences in few pin groups (qua_mi2s -> i2s0). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio --- drivers/pinctrl/qcom/Kconfig | 11 + drivers/pinctrl/qcom/Makefile | 1 + .../pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c | 240 ++++++++++++++++++ 3 files changed, 252 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 8d4f871e07cf..6e306992fad9 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -486,6 +486,17 @@ config PINCTRL_SM8550 Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc SM8550 platform. +config PINCTRL_SM8550_LPASS_LPI + tristate "Qualcomm Technologies Inc SM8550 LPASS LPI pin controller driver" + depends on GPIOLIB + depends on ARM64 || COMPILE_TEST + depends on PINCTRL_LPASS_LPI + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI + (Low Power Island) found on the Qualcomm Technologies Inc SM8550 + platform. + config PINCTRL_LPASS_LPI tristate "Qualcomm Technologies Inc LPASS LPI pin controller driver" select PINMUX diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 6763aa8d319c..37bfbcf8234b 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -50,5 +50,6 @@ obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o obj-$(CONFIG_PINCTRL_SM8450_LPASS_LPI) += pinctrl-sm8450-lpass-lpi.o obj-$(CONFIG_PINCTRL_SM8550) += pinctrl-sm8550.o +obj-$(CONFIG_PINCTRL_SM8550_LPASS_LPI) += pinctrl-sm8550-lpass-lpi.o obj-$(CONFIG_PINCTRL_SC8280XP_LPASS_LPI) += pinctrl-sc8280xp-lpass-lpi.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c new file mode 100644 index 000000000000..c2bdd936d27f --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8550-lpass-lpi.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022-2023 Linaro Ltd. + */ + +#include +#include +#include + +#include "pinctrl-lpass-lpi.h" + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_dmic4_clk, + LPI_MUX_dmic4_data, + LPI_MUX_i2s0_clk, + LPI_MUX_i2s0_data, + LPI_MUX_i2s0_ws, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_i2s3_clk, + LPI_MUX_i2s3_data, + LPI_MUX_i2s3_ws, + LPI_MUX_i2s4_clk, + LPI_MUX_i2s4_data, + LPI_MUX_i2s4_ws, + LPI_MUX_slimbus_clk, + LPI_MUX_slimbus_data, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_wsa2_swr_clk, + LPI_MUX_wsa2_swr_data, + LPI_MUX_ext_mclk1_a, + LPI_MUX_ext_mclk1_b, + LPI_MUX_ext_mclk1_c, + LPI_MUX_ext_mclk1_d, + LPI_MUX_ext_mclk1_e, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; +static int gpio14_pins[] = { 14 }; +static int gpio15_pins[] = { 15 }; +static int gpio16_pins[] = { 16 }; +static int gpio17_pins[] = { 17 }; +static int gpio18_pins[] = { 18 }; +static int gpio19_pins[] = { 19 }; +static int gpio20_pins[] = { 20 }; +static int gpio21_pins[] = { 21 }; +static int gpio22_pins[] = { 22 }; + +static const struct pinctrl_pin_desc sm8550_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), + PINCTRL_PIN(15, "gpio15"), + PINCTRL_PIN(16, "gpio16"), + PINCTRL_PIN(17, "gpio17"), + PINCTRL_PIN(18, "gpio18"), + PINCTRL_PIN(19, "gpio19"), + PINCTRL_PIN(20, "gpio20"), + PINCTRL_PIN(21, "gpio21"), + PINCTRL_PIN(22, "gpio22"), +}; + +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const dmic4_clk_groups[] = { "gpio17" }; +static const char * const dmic4_data_groups[] = { "gpio18" }; +static const char * const i2s0_clk_groups[] = { "gpio0" }; +static const char * const i2s0_ws_groups[] = { "gpio1" }; +static const char * const i2s0_data_groups[] = { "gpio2", "gpio3", "gpio4", "gpio5" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio15", "gpio16" }; +static const char * const i2s3_clk_groups[] = { "gpio12" }; +static const char * const i2s3_ws_groups[] = { "gpio13" }; +static const char * const i2s3_data_groups[] = { "gpio17", "gpio18" }; +static const char * const i2s4_clk_groups[] = { "gpio19"}; +static const char * const i2s4_ws_groups[] = { "gpio20"}; +static const char * const i2s4_data_groups[] = { "gpio21", "gpio22"}; +static const char * const slimbus_clk_groups[] = { "gpio19"}; +static const char * const slimbus_data_groups[] = { "gpio20"}; +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5", "gpio15" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const wsa2_swr_clk_groups[] = { "gpio15" }; +static const char * const wsa2_swr_data_groups[] = { "gpio16" }; +static const char * const ext_mclk1_c_groups[] = { "gpio5" }; +static const char * const ext_mclk1_b_groups[] = { "gpio9" }; +static const char * const ext_mclk1_a_groups[] = { "gpio13" }; +static const char * const ext_mclk1_d_groups[] = { "gpio14" }; +static const char * const ext_mclk1_e_groups[] = { "gpio22" }; + +static const struct lpi_pingroup sm8550_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, i2s0_clk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, i2s0_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, i2s0_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, i2s0_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, i2s0_data, _, _), + LPI_PINGROUP(5, 12, swr_rx_data, ext_mclk1_c, i2s0_data, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, ext_mclk1_b, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s3_clk, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s3_ws, ext_mclk1_a, _), + LPI_PINGROUP(14, 6, swr_tx_data, ext_mclk1_d, _, _), + LPI_PINGROUP(15, 20, i2s2_data, wsa2_swr_clk, _, _), + LPI_PINGROUP(16, 22, i2s2_data, wsa2_swr_data, _, _), + LPI_PINGROUP(17, LPI_NO_SLEW, dmic4_clk, i2s3_data, _, _), + LPI_PINGROUP(18, LPI_NO_SLEW, dmic4_data, i2s3_data, _, _), + LPI_PINGROUP(19, LPI_NO_SLEW, i2s4_clk, slimbus_clk, _, _), + LPI_PINGROUP(20, LPI_NO_SLEW, i2s4_ws, slimbus_data, _, _), + LPI_PINGROUP(21, LPI_NO_SLEW, i2s4_data, _, _, _), + LPI_PINGROUP(22, LPI_NO_SLEW, i2s4_data, ext_mclk1_e, _, _), +}; + +static const struct lpi_function sm8550_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(dmic4_clk), + LPI_FUNCTION(dmic4_data), + LPI_FUNCTION(i2s0_clk), + LPI_FUNCTION(i2s0_data), + LPI_FUNCTION(i2s0_ws), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(i2s3_clk), + LPI_FUNCTION(i2s3_data), + LPI_FUNCTION(i2s3_ws), + LPI_FUNCTION(i2s4_clk), + LPI_FUNCTION(i2s4_data), + LPI_FUNCTION(i2s4_ws), + LPI_FUNCTION(slimbus_clk), + LPI_FUNCTION(slimbus_data), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), + LPI_FUNCTION(wsa2_swr_clk), + LPI_FUNCTION(wsa2_swr_data), + LPI_FUNCTION(ext_mclk1_a), + LPI_FUNCTION(ext_mclk1_b), + LPI_FUNCTION(ext_mclk1_c), + LPI_FUNCTION(ext_mclk1_d), + LPI_FUNCTION(ext_mclk1_e), +}; + +static const struct lpi_pinctrl_variant_data sm8550_lpi_data = { + .pins = sm8550_lpi_pins, + .npins = ARRAY_SIZE(sm8550_lpi_pins), + .groups = sm8550_groups, + .ngroups = ARRAY_SIZE(sm8550_groups), + .functions = sm8550_functions, + .nfunctions = ARRAY_SIZE(sm8550_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sm8550-lpass-lpi-pinctrl", + .data = &sm8550_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sm8550-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("Qualcomm SM8550 LPI GPIO pin control driver"); +MODULE_LICENSE("GPL");