From patchwork Wed Apr 27 20:31:20 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623225 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=l+gEk2pN; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=MrhPmLC7; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVmq5qNVz9s5V for ; Thu, 28 Apr 2022 06:32:43 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 9F09583ECD; Wed, 27 Apr 2022 22:32:16 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="l+gEk2pN"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="MrhPmLC7"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 4F41183E7E; Wed, 27 Apr 2022 22:32:04 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id BCEF983C70 for ; Wed, 27 Apr 2022 22:31:50 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute4.internal (compute4.nyi.internal [10.202.2.44]) by mailout.nyi.internal (Postfix) with ESMTP id 03D985C019D; Wed, 27 Apr 2022 16:31:50 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute4.internal (MEProxy); Wed, 27 Apr 2022 16:31:50 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:date:date:from:from:in-reply-to :in-reply-to:message-id:mime-version:references:reply-to:sender :subject:subject:to:to; s=fm2; t=1651091509; x=1651177909; bh=ty HmvmEqAQZUN3GCMvRZmEqWmRCBMnY2zizDHbqN/jE=; b=l+gEk2pNtGUsEKzHzF k37O29prIRECXEc+Mynl4RH1shauaDCLpK/RhMFEnlvnnhQE2y3yjw39R9YO121b 2xaviLzb+nCmboW5A1N3RwJU6j79EEFD1g0PydLBGVKGULVzrdaJhgf1uZHzGEJR WSH3H9L6PEKvEKZZBgUweWIUtQrIGykTXFhdpNb+LnwmOWmbZhfwTlBGz+N6PU49 GstzvC9T4ZXmszpB2+ynwNG4D1dFvHZryNQpN6eHpwVLNXCAj1HOOR/SeK2kckJ/ 57G9DIs8mMeKHl39Pq/wW/+wof2mA6Lv5DH6AMpv2ADAEmaRwO3Sb1eQa4iJJWRM atDw== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm1; t= 1651091509; x=1651177909; bh=tyHmvmEqAQZUN3GCMvRZmEqWmRCBMnY2ziz DHbqN/jE=; b=MrhPmLC74lvveX0QhRIzPu1POnv18xnRBPgOpEKl1HYF5QV/hHm UWSvFuCEqmTig57RSuZQDjpCQKBtaQDq+yfqhhU28yMo7JBYEMXIxd5FwFxGyVxK WuuyoKBjqgUQNjh9PVH26YjtNE41w1k1BGS6V8Jpu2sQabi1p7fqBB2wCDVGbLob prLi+agOwdun98EyfsAjwRZ4F6CO1vX2Lrgf6eui5K0P7Xr9S2/kVozVWARw0M0d uyExMrWQKo433EP3fn8dkKwLG7KlweoVY51E8Lvw9YH1fAoXAiHToEyUe1Ww4MJC Kdoz6E+alv3aglULpfZLgD0lS5uDL6TrN0Q== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeeiucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepufgrmhhu vghlucfjohhllhgrnhguuceoshgrmhhuvghlsehshhholhhlrghnugdrohhrgheqnecugg ftrfgrthhtvghrnhepudekteeuudehtdelteevgfduvddvjefhfedulefgudevgeeghefg udefiedtveetnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehmrghilhhfrh homhepshgrmhhuvghlsehshhholhhlrghnugdrohhrgh X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:31:49 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 01/12] dt-bindings: sunxi: Update clock/reset binding headers Date: Wed, 27 Apr 2022 15:31:20 -0500 Message-Id: <20220427203132.47271-2-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Some devicetree updates make use of newly-exposed clocks and resets. To support that, copy the binding headers from the Linux v5.18-rc1 tag. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- include/dt-bindings/clock/sun50i-a64-ccu.h | 2 +- include/dt-bindings/clock/sun5i-ccu.h | 13 ++----------- include/dt-bindings/clock/sun6i-a31-ccu.h | 2 ++ include/dt-bindings/clock/sun8i-a23-a33-ccu.h | 2 ++ include/dt-bindings/clock/sun8i-h3-ccu.h | 2 +- include/dt-bindings/clock/sun8i-v3s-ccu.h | 4 ++++ include/dt-bindings/reset/sun5i-ccu.h | 11 +---------- include/dt-bindings/reset/sun8i-v3s-ccu.h | 3 +++ 8 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h index 318eb15c41..175892189e 100644 --- a/include/dt-bindings/clock/sun50i-a64-ccu.h +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -113,7 +113,7 @@ #define CLK_USB_OHCI0 91 #define CLK_USB_OHCI1 93 - +#define CLK_DRAM 94 #define CLK_DRAM_VE 95 #define CLK_DRAM_CSI 96 #define CLK_DRAM_DEINTERLACE 97 diff --git a/include/dt-bindings/clock/sun5i-ccu.h b/include/dt-bindings/clock/sun5i-ccu.h index 81f34d477a..75fe5619c3 100644 --- a/include/dt-bindings/clock/sun5i-ccu.h +++ b/include/dt-bindings/clock/sun5i-ccu.h @@ -1,17 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2016 Maxime Ripard * * Maxime Ripard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef _DT_BINDINGS_CLK_SUN5I_H_ @@ -100,7 +91,7 @@ #define CLK_AVS 96 #define CLK_HDMI 97 #define CLK_GPU 98 - +#define CLK_MBUS 99 #define CLK_IEP 100 #endif /* _DT_BINDINGS_CLK_SUN5I_H_ */ diff --git a/include/dt-bindings/clock/sun6i-a31-ccu.h b/include/dt-bindings/clock/sun6i-a31-ccu.h index c5d1334018..39878d9dce 100644 --- a/include/dt-bindings/clock/sun6i-a31-ccu.h +++ b/include/dt-bindings/clock/sun6i-a31-ccu.h @@ -49,6 +49,8 @@ #define CLK_PLL_VIDEO1_2X 13 +#define CLK_PLL_MIPI 15 + #define CLK_CPU 18 #define CLK_AHB1_MIPIDSI 23 diff --git a/include/dt-bindings/clock/sun8i-a23-a33-ccu.h b/include/dt-bindings/clock/sun8i-a23-a33-ccu.h index f8222b6b2c..eb524d0bbd 100644 --- a/include/dt-bindings/clock/sun8i-a23-a33-ccu.h +++ b/include/dt-bindings/clock/sun8i-a23-a33-ccu.h @@ -43,6 +43,8 @@ #ifndef _DT_BINDINGS_CLK_SUN8I_A23_A33_H_ #define _DT_BINDINGS_CLK_SUN8I_A23_A33_H_ +#define CLK_PLL_MIPI 13 + #define CLK_CPUX 18 #define CLK_BUS_MIPI_DSI 23 diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h index 30d2d15373..5d4ada2c22 100644 --- a/include/dt-bindings/clock/sun8i-h3-ccu.h +++ b/include/dt-bindings/clock/sun8i-h3-ccu.h @@ -126,7 +126,7 @@ #define CLK_USB_OHCI1 93 #define CLK_USB_OHCI2 94 #define CLK_USB_OHCI3 95 - +#define CLK_DRAM 96 #define CLK_DRAM_VE 97 #define CLK_DRAM_CSI 98 #define CLK_DRAM_DEINTERLACE 99 diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h index c0d5d5599c..014ac6123d 100644 --- a/include/dt-bindings/clock/sun8i-v3s-ccu.h +++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h @@ -104,4 +104,8 @@ #define CLK_MIPI_CSI 73 +/* Clocks not available on V3s */ +#define CLK_BUS_I2S0 75 +#define CLK_I2S0 76 + #endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */ diff --git a/include/dt-bindings/reset/sun5i-ccu.h b/include/dt-bindings/reset/sun5i-ccu.h index c2b9726b50..40cc22ae76 100644 --- a/include/dt-bindings/reset/sun5i-ccu.h +++ b/include/dt-bindings/reset/sun5i-ccu.h @@ -1,17 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2016 Maxime Ripard * * Maxime Ripard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef _RST_SUN5I_H_ diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h index b58ef21a2e..b6790173af 100644 --- a/include/dt-bindings/reset/sun8i-v3s-ccu.h +++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h @@ -75,4 +75,7 @@ #define RST_BUS_UART1 50 #define RST_BUS_UART2 51 +/* Reset lines not available on V3s */ +#define RST_BUS_I2S0 52 + #endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */ From patchwork Wed Apr 27 20:31:21 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623224 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=aQRbbF35; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=M0+IVZHv; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVmS5NQWz9s5V for ; Thu, 28 Apr 2022 06:32:24 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 4615983EA6; Wed, 27 Apr 2022 22:32:11 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="aQRbbF35"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="M0+IVZHv"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id B1C5C83D71; Wed, 27 Apr 2022 22:32:03 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 7B41783D71 for ; Wed, 27 Apr 2022 22:31:52 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute5.internal (compute5.nyi.internal [10.202.2.45]) by mailout.nyi.internal (Postfix) with ESMTP id B0A225C00D9; Wed, 27 Apr 2022 16:31:51 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute5.internal (MEProxy); Wed, 27 Apr 2022 16:31:51 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:date:date:from:from:in-reply-to :in-reply-to:message-id:mime-version:references:reply-to:sender :subject:subject:to:to; s=fm2; t=1651091511; x=1651177911; bh=sk EaOhT13t6TGIWvhKD4k1SMsq7Xm6v2qBDylZGYrDY=; b=aQRbbF35KBQvntKJ4L Rz79m2xWz90rQeF4SbtFzYQBcRAiVu0MuaEv+IGT/DMSwPpQKHBxyzZq0hZ/xhx0 Izlf5/p2c1wkJ9dpXtK27YtZm0ga3Huhi14cLoDHIchM7J24qJ04sU+LTUTDLGCx 5+m2uxh3UyRRHgburuOBndTS8f3tVTgtAJNKywfgHkUPgPvm46MAdDNcZ7No7YdR fL8JfyvFMBXkMZCb+vS2qUceTyaX8l5dowIOqDO2Lp+9Lba3Anq4QpNcamLs+Mud qUGgfua8xQYrXbeaHpKAMeqFbUhNwTLDNpGNaXXaL6Gp/u1UZ9xK90HkFpXlauO4 qxHQ== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm1; t= 1651091511; x=1651177911; bh=skEaOhT13t6TGIWvhKD4k1SMsq7Xm6v2qBD ylZGYrDY=; b=M0+IVZHveRutX3f3uxCCzEjGhT4MfM/JX4OQhHqozY50T/ztKJX zYYU/50E7RVXR1F54Q3kDIbIZfiBesMdf7ZhZf3/vjb3pKa0yxVjjg5H2QHtYjZV CuGhTKPJuEuEwnpo1A1357DABu96ySUr4S4j0DZd3CNZHt+dPa4E2a7YO1Cswshe MiHltJ3G5ddUG/dtNeSYkj4oF2S9rCY2UnROOnbjoOFZTYpk50CohOOfPFUNQKiX iSYXivYK4gXmyEg7V2O8lULZoSov2CVBuFx7MN/Df8Xkbs3OmKtbfLvjm/ebeRTD TS4mXzjZuRE/1CkLZDpYz/U9K2wVaE71x7Q== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeeiucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepufgrmhhu vghlucfjohhllhgrnhguuceoshgrmhhuvghlsehshhholhhlrghnugdrohhrgheqnecugg ftrfgrthhtvghrnhepudekteeuudehtdelteevgfduvddvjefhfedulefgudevgeeghefg udefiedtveetnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehmrghilhhfrh homhepshgrmhhuvghlsehshhholhhlrghnugdrohhrgh X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:31:51 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 02/12] ARM: dts: sunxi: Remove unused devicetree headers Date: Wed, 27 Apr 2022 15:31:21 -0500 Message-Id: <20220427203132.47271-3-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean These files are not included anywhere and do not exist in the Linux devicetree source. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/sun5i-q8-common.dtsi | 180 ------------------------------ arch/arm/dts/sunxi-q8-common.dtsi | 83 -------------- 2 files changed, 263 deletions(-) delete mode 100644 arch/arm/dts/sun5i-q8-common.dtsi delete mode 100644 arch/arm/dts/sunxi-q8-common.dtsi diff --git a/arch/arm/dts/sun5i-q8-common.dtsi b/arch/arm/dts/sun5i-q8-common.dtsi deleted file mode 100644 index a78e189f66..0000000000 --- a/arch/arm/dts/sun5i-q8-common.dtsi +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ -#include "sunxi-q8-common.dtsi" - -#include - -/ { - aliases { - serial0 = &uart1; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -&i2c1 { - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -#include "axp209.dtsi" - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PG12"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb0_vbus { - gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sunxi-q8-common.dtsi b/arch/arm/dts/sunxi-q8-common.dtsi deleted file mode 100644 index b8241462fc..0000000000 --- a/arch/arm/dts/sunxi-q8-common.dtsi +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include -#include -#include -#include "sunxi-common-regulators.dtsi" - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; From patchwork Wed Apr 27 20:31:23 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623231 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=whcSUurs; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=D/TzciAw; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVpl5VShz9s5V for ; Thu, 28 Apr 2022 06:34:23 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id E9F6F83E90; Wed, 27 Apr 2022 22:33:06 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="whcSUurs"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="D/TzciAw"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 2CB4C83D67; Wed, 27 Apr 2022 22:32:24 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 4D20D83D67 for ; Wed, 27 Apr 2022 22:31:56 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute2.internal (compute2.nyi.internal [10.202.2.46]) by mailout.nyi.internal (Postfix) with ESMTP id 3F84B5C0199; Wed, 27 Apr 2022 16:31:55 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute2.internal (MEProxy); Wed, 27 Apr 2022 16:31:55 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:date:date:from:from:in-reply-to :in-reply-to:message-id:mime-version:references:reply-to:sender :subject:subject:to:to; s=fm2; t=1651091515; x=1651177915; bh=sV 90iY1d3ZizwIy0Lh9KpfUNP9i5wGlRgLT3qXxfL78=; b=whcSUursAxj6lPU2wO AeE17vQCks7rq/5s0cJsn2LwbaRdL8CMz5hnaT5AYw3PQ+i3OrlrS0ASu3OQYqHt 2Zf5ntAubrPt7bJRQrtpSQByh3Y02DEbJ2ecmyAr0skp1L6M+DO9bdVaYZ89m4r6 P5YfhQtUxro51rWZjDp41lE6x1PynI5aNUaTYoGQh/sIvgDQF7Js30447OeWoGQU hJ3b3D+QGbjv1hhLoIWDJnf6a0ivjVt0GwjB7xR5/jkFyk2dPcm2w00InIFzVCnG e9pVNXsO988HHL4VKHxmmI4U71L3msZNV1syOTi2qMuvpvkU8pflx2niiPRUH3m+ 6Y4w== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm1; t= 1651091515; x=1651177915; bh=sV90iY1d3ZizwIy0Lh9KpfUNP9i5wGlRgLT 3qXxfL78=; b=D/TzciAw/NOufF66fAxHxyEo/+x/NehfTPd0JiaIwkmEfyCi26y wZukLoNYI8+lKJnk460v36MIMtrYVPYc2Ki8WqXvek9S6BAvn0B0cAKf81ubj+JD PJoelFUxr8+RzL6t71hGPL6QTZXJZ0RpbWijaE78yYreHxF5RuHZuHfGiEaxJtkA JGOtT7NiSBobYIn7lbmnVxr+q3GnggeVkSP8HZzRiZbGkI5RmwdLgwt7ptNH1Wz1 4TDHJfoFf4IiAfUqUtMcE4Pv3yqkpiYcAeGH/NSm0RY3I8FNvXFLBg7SZYY/hpQh WB/NNvF8b+Btak9n91+NUybnsdWCQnlQnZA== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeejucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepufgrmhhu vghlucfjohhllhgrnhguuceoshgrmhhuvghlsehshhholhhlrghnugdrohhrgheqnecugg ftrfgrthhtvghrnhepudekteeuudehtdelteevgfduvddvjefhfedulefgudevgeeghefg udefiedtveetnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehmrghilhhfrh homhepshgrmhhuvghlsehshhholhhlrghnugdrohhrgh X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:31:54 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 04/12] ARM: dts: sun7i: Sync from Linux v5.18-rc1 Date: Wed, 27 Apr 2022 15:31:23 -0500 Message-Id: <20220427203132.47271-5-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Copy the devicetree source for the A20 SoC and all existing boards verbatim from the Linux v5.18-rc1 tag. This commit also adds the following new board devicetrees: - sun7i-a20-haoyu-marsboard.dts - sun7i-a20-linutronix-testbox-v2.dts - sun7i-a20-olinuxino-lime-emmc.dts This update includes changes to the USB PHY detection GPIO properties which are needed to convert that driver to use the DM GPIO framework. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/Makefile | 3 + arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts | 16 +- arch/arm/dts/sun7i-a20-bananapi.dts | 41 ++- arch/arm/dts/sun7i-a20-bananapro.dts | 16 +- arch/arm/dts/sun7i-a20-cubieboard2.dts | 28 +- arch/arm/dts/sun7i-a20-cubietruck.dts | 20 +- arch/arm/dts/sun7i-a20-haoyu-marsboard.dts | 182 +++++++++++++ arch/arm/dts/sun7i-a20-hummingbird.dts | 21 +- arch/arm/dts/sun7i-a20-i12-tvbox.dts | 16 +- arch/arm/dts/sun7i-a20-icnova-swac.dts | 15 +- arch/arm/dts/sun7i-a20-itead-ibox.dts | 8 +- arch/arm/dts/sun7i-a20-lamobo-r1.dts | 16 +- .../dts/sun7i-a20-linutronix-testbox-v2.dts | 47 ++++ arch/arm/dts/sun7i-a20-m3.dts | 14 +- arch/arm/dts/sun7i-a20-olimex-som-evb.dts | 14 +- arch/arm/dts/sun7i-a20-olimex-som204-evb.dts | 30 ++- .../arm/dts/sun7i-a20-olinuxino-lime-emmc.dts | 32 +++ arch/arm/dts/sun7i-a20-olinuxino-lime.dts | 32 +-- arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 46 ++-- arch/arm/dts/sun7i-a20-olinuxino-micro.dts | 32 +-- arch/arm/dts/sun7i-a20-orangepi-mini.dts | 28 +- arch/arm/dts/sun7i-a20-orangepi.dts | 26 +- arch/arm/dts/sun7i-a20-pcduino3-nano.dts | 32 +-- arch/arm/dts/sun7i-a20-pcduino3.dts | 28 +- arch/arm/dts/sun7i-a20-wexler-tab7200.dts | 13 +- arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts | 24 +- arch/arm/dts/sun7i-a20.dtsi | 254 ++++++++++++++++-- 27 files changed, 707 insertions(+), 327 deletions(-) create mode 100644 arch/arm/dts/sun7i-a20-haoyu-marsboard.dts create mode 100644 arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts create mode 100644 arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 48ede8888e..7120d6a3aa 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -583,11 +583,13 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapro.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ + sun7i-a20-haoyu-marsboard.dtb \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ sun7i-a20-itead-ibox.dtb \ sun7i-a20-lamobo-r1.dtb \ + sun7i-a20-linutronix-testbox-v2.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-m5.dtb \ sun7i-a20-mk808c.dtb \ @@ -595,6 +597,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olimex-som204-evb.dtb \ sun7i-a20-olimex-som204-evb-emmc.dtb \ sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-lime-emmc.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts index 4dbcad1343..caa935ca4f 100644 --- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts @@ -74,12 +74,12 @@ leds { compatible = "gpio-leds"; - green { + led-0 { label = "bananapi-m1-plus:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; - pwr { + led-1 { label = "bananapi-m1-plus:pwr:usr"; gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -129,14 +129,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -171,6 +167,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts index 33040c43bc..46ecf9db23 100644 --- a/arch/arm/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/dts/sun7i-a20-bananapi.dts @@ -77,7 +77,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "bananapi:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; @@ -104,16 +104,15 @@ &cpu0 { cpu-supply = <®_dcdc2>; - operating-points = < + operating-points = /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1350000 - 720000 1250000 - 528000 1150000 - 312000 1100000 - 144000 1050000 - >; + <960000 1400000>, + <912000 1400000>, + <864000 1350000>, + <720000 1250000>, + <528000 1150000>, + <312000 1100000>, + <144000 1050000>; }; &de { @@ -131,14 +130,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -171,6 +166,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -246,12 +247,6 @@ "SPI-MISO", "SPI-CE1", "", "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", "", "", "", "", "", "", "", ""; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; }; #include "axp209.dtsi" @@ -329,9 +324,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts index 8a75545e22..e22f0e8bb1 100644 --- a/arch/arm/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/dts/sun7i-a20-bananapro.dts @@ -63,12 +63,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bananapro:blue:usr"; gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "bananapro:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; @@ -109,14 +109,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -143,6 +139,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts index 200685b0b1..e35e6990c4 100644 --- a/arch/arm/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts @@ -75,12 +75,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubieboard2:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "cubieboard2:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; @@ -115,13 +115,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -161,6 +157,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &ohci0 { status = "okay"; }; @@ -173,14 +175,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { status = "okay"; }; @@ -236,9 +230,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts index 46a9f4669e..52160e3683 100644 --- a/arch/arm/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/dts/sun7i-a20-cubietruck.dts @@ -75,22 +75,22 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubietruck:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; - orange { + led-1 { label = "cubietruck:orange:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; - white { + led-2 { label = "cubietruck:white:usr"; gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; }; - green { + led-3 { label = "cubietruck:green:usr"; gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; }; @@ -150,13 +150,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii-id"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -194,6 +190,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts b/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts new file mode 100644 index 0000000000..097e479c27 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-haoyu-marsboard.dts @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 Conley Lee + * Conley Lee + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "HAOYU Electronics Marsboard A20"; + compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>; + phy-handle = <&phy0>; + phy-mode = "mii"; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ + status = "okay"; +}; + +&gmac_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + gmac_txerr: gmac-txerr-pin { + pins = "PA17"; + function = "gmac"; + }; +}; + +®_ahci_5v { + status = "okay"; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts index fd0153f656..3def2a3305 100644 --- a/arch/arm/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/dts/sun7i-a20-hummingbird.dts @@ -100,19 +100,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_vdd>; - /* phy reset config */ - snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ - snps,reset-active-low; - /* wait 1s after reset, otherwise fail to read phy id */ - snps,reset-delays-us = <0 10000 1000000>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -146,6 +137,16 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ + reset-assert-us = <10000>; + /* wait 1s after reset, otherwise fail to read phy id */ + reset-deassert-us = <1000000>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v0>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts index 5f1c4f573d..b21ddd0ec1 100644 --- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts @@ -62,12 +62,12 @@ leds { compatible = "gpio-leds"; - red { + led-0 { label = "i12_tvbox:red:usr"; gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; }; - blue { + led-1 { label = "i12_tvbox:blue:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; @@ -115,14 +115,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -145,6 +141,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts index 949494730a..413505f45a 100644 --- a/arch/arm/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts @@ -49,7 +49,8 @@ / { model = "ICnova-A20 SWAC"; - compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20"; + compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20", + "allwinner,sun7i-a20"; aliases { serial0 = &uart0; @@ -75,13 +76,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -98,6 +95,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts index b90a7607d0..8ff83016ff 100644 --- a/arch/arm/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts @@ -53,13 +53,13 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_itead_core>; - green { + led-0 { label = "itead_core:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - blue { + led-1 { label = "itead_core:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -97,10 +97,12 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; +}; +&gmac_mdio { phy1: ethernet-phy@1 { reg = <1>; }; diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts index f91e1bee44..97518afe46 100644 --- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts @@ -75,7 +75,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "lamobo_r1:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; @@ -123,8 +123,6 @@ phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - /delete-property/#address-cells; - /delete-property/#size-cells; fixed-link { speed = <1000>; @@ -229,14 +227,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" &ac_power_supply { @@ -322,9 +312,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts new file mode 100644 index 0000000000..da5a2eea4c --- /dev/null +++ b/arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2020 Linutronix GmbH + * Author: Benedikt Spranger + */ + +/dts-v1/; +#include "sun7i-a20-lamobo-r1.dts" + +/ { + model = "Lamobo R1"; + compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + + leds { + led-opto1 { + label = "lamobo_r1:opto:powerswitch"; + gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>; + }; + + led-opto2 { + label = "lamobo_r1:opto:relay"; + gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + status = "okay"; + }; + + atecc508a@60 { + compatible = "atmel,atecc508a"; + reg = <0x60>; + }; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts index b8a1aaaf39..f161d52388 100644 --- a/arch/arm/dts/sun7i-a20-m3.dts +++ b/arch/arm/dts/sun7i-a20-m3.dts @@ -64,7 +64,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "m3:blue:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; @@ -82,13 +82,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -111,6 +107,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts index f0e6a96e57..f05ee32bc9 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts @@ -75,7 +75,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "a20-olimex-som-evb:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -111,13 +111,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -202,6 +198,12 @@ }; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts index 823aabce04..54af6c1807 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts @@ -46,19 +46,19 @@ leds { compatible = "gpio-leds"; - stat { + led-0 { label = "a20-som204-evb:green:stat"; gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - led1 { + led-1 { label = "a20-som204-evb:green:led1"; gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - led2 { + led-2 { label = "a20-som204-evb:yellow:led2"; gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -105,18 +105,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy3>; + phy-handle = <&phy3>; phy-mode = "rgmii"; phy-supply = <®_vcc3v3>; - - snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; status = "okay"; - - phy3: ethernet-phy@3 { - reg = <3>; - }; }; &hdmi { @@ -161,6 +153,16 @@ status = "okay"; }; +&gmac_mdio { + phy3: ethernet-phy@3 { + reg = <3>; + reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ + reset-assert-us = <10000>; + /* wait 1s after reset, otherwise fail to read phy id */ + reset-deassert-us = <1000000>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -314,8 +316,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts new file mode 100644 index 0000000000..033cab3443 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Olimex Ltd. + * Author: Stefan Mavrodiev + */ + +#include "sun7i-a20-olinuxino-lime.dts" + +/ { + model = "Olimex A20-OLinuXino-LIME-eMMC"; + compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&mmc2_pwrseq>; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts index 5e411194bf..92938d0222 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts @@ -78,7 +78,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a20-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -106,13 +106,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -149,6 +145,12 @@ }; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -174,18 +176,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -217,10 +207,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts index 996201665b..ecb91fb899 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts @@ -75,7 +75,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a20-olinuxino-lime2:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -111,13 +111,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii-id"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -154,6 +150,12 @@ vref-supply = <®_vcc3v0>; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -174,23 +176,17 @@ }; &pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_ldo3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_ldo4>; + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -200,6 +196,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -267,10 +271,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts index 840ae1194a..a1b89b2a29 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts @@ -82,7 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxino>; - green { + led { label = "a20-olinuxino-micro:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -118,13 +118,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -215,6 +211,12 @@ }; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -252,18 +254,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; #include "axp209.dtsi" @@ -355,10 +345,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts index 15881081ca..84efa01e7c 100644 --- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts @@ -75,12 +75,12 @@ leds { compatible = "gpio-leds"; - green { + led-0 { label = "orangepi:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ }; - blue { + led-1 { label = "orangepi:blue:usr"; gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ }; @@ -120,14 +120,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -158,6 +154,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -176,14 +178,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -239,9 +233,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts index d64de2e73a..5d77f1d981 100644 --- a/arch/arm/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/dts/sun7i-a20-orangepi.dts @@ -64,7 +64,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "orangepi:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ }; @@ -96,14 +96,10 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -124,6 +120,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -135,14 +137,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -198,9 +192,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts index 205eaae44a..e40ecb48d7 100644 --- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts @@ -1,5 +1,5 @@ /* - * Copyright 2015 Adam Sampson + * Copyright 2015-2020 Adam Sampson * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -72,14 +72,12 @@ leds { compatible = "gpio-leds"; - /* Marked "LED3" on the PCB. */ - usr1 { + led-3 { label = "pcduino3-nano:green:usr1"; gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */ }; - /* Marked "LED4" on the PCB. */ - usr2 { + led-4 { label = "pcduino3-nano:green:usr2"; gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ }; @@ -114,13 +112,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii-id"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -149,6 +143,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -168,14 +168,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; @@ -226,9 +218,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts index a72ed4318d..4f8d55d3ba 100644 --- a/arch/arm/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/dts/sun7i-a20-pcduino3.dts @@ -64,12 +64,12 @@ leds { compatible = "gpio-leds"; - tx { + led-0 { label = "pcduino3:green:tx"; gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; }; - rx { + led-1 { label = "pcduino3:green:rx"; gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; }; @@ -122,13 +122,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_mii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -149,6 +145,12 @@ status = "okay"; }; +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -168,14 +170,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -226,9 +220,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts index ffade253d1..fef02fcbbd 100644 --- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts @@ -64,6 +64,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { @@ -156,14 +157,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -223,9 +216,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts index c27e56091f..3bfae98f3c 100644 --- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -81,13 +81,9 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; - phy = <&phy1>; + phy-handle = <&phy1>; phy-mode = "rgmii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { @@ -110,6 +106,12 @@ #include "axp209.dtsi" +&gmac_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -145,14 +147,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -206,9 +200,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi index 641a8fa6d4..5574299685 100644 --- a/arch/arm/dts/sun7i-a20.dtsi +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -47,6 +47,7 @@ #include #include #include +#include / { interrupt-parent = <&gic>; @@ -105,16 +106,15 @@ reg = <0>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1300000 - 720000 1200000 - 528000 1100000 - 312000 1000000 - 144000 1000000 - >; + <960000 1400000>, + <912000 1400000>, + <864000 1300000>, + <720000 1200000>, + <528000 1100000>, + <312000 1000000>, + <144000 1000000>; #cooling-cells = <2>; }; @@ -124,22 +124,21 @@ reg = <1>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1300000 - 720000 1200000 - 528000 1100000 - 312000 1000000 - 144000 1000000 - >; + <960000 1400000>, + <912000 1400000>, + <864000 1300000>, + <720000 1200000>, + <528000 1100000>, + <312000 1000000>, + <144000 1000000>; #cooling-cells = <2>; }; }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; @@ -180,7 +179,7 @@ default-pool { compatible = "shared-dma-pool"; size = <0x6000000>; - alloc-ranges = <0x4a000000 0x6000000>; + alloc-ranges = <0x40000000 0x10000000>; reusable; linux,cma-default; }; @@ -333,7 +332,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = ; @@ -376,6 +375,16 @@ num-cs = <1>; }; + csi0: csi@1c09000 { + compatible = "allwinner,sun7i-a20-csi0"; + reg = <0x01c09000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "isp", "ram"; + resets = <&ccu RST_CSI0>; + status = "disabled"; + }; + emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; @@ -394,11 +403,12 @@ }; tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun7i-a20-tcon"; + compatible = "allwinner,sun7i-a20-tcon0", + "allwinner,sun7i-a20-tcon"; reg = <0x01c0c000 0x1000>; interrupts = ; - resets = <&ccu RST_TCON0>; - reset-names = "lcd"; + resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>; + reset-names = "lcd", "lvds"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_TCON0_CH0>, <&ccu CLK_TCON0_CH1>; @@ -406,6 +416,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 14>; ports { @@ -443,7 +454,8 @@ }; tcon1: lcd-controller@1c0d000 { - compatible = "allwinner,sun7i-a20-tcon"; + compatible = "allwinner,sun7i-a20-tcon1", + "allwinner,sun7i-a20-tcon"; reg = <0x01c0d000 0x1000>; interrupts = ; resets = <&ccu RST_TCON1>; @@ -455,6 +467,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 15>; ports { @@ -586,13 +599,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; @@ -716,6 +730,17 @@ status = "disabled"; }; + csi1: csi@1c1d000 { + compatible = "allwinner,sun7i-a20-csi1", + "allwinner,sun4i-a10-csi1"; + reg = <0x01c1d000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "ram"; + resets = <&ccu RST_CSI1>; + status = "disabled"; + }; + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; @@ -751,21 +776,70 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + /omit-if-no-ref/ + can_pa_pins: can-pa-pins { + pins = "PA16", "PA17"; + function = "can"; + }; + + /omit-if-no-ref/ can_ph_pins: can-ph-pins { pins = "PH20", "PH21"; function = "can"; }; + /omit-if-no-ref/ clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; }; + /omit-if-no-ref/ clk_out_b_pin: clk-out-b-pin { pins = "PI13"; function = "clk_out_b"; }; + /omit-if-no-ref/ + csi0_8bits_pins: csi-8bits-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", + "PE6", "PE7", "PE8", "PE9", "PE10", + "PE11"; + function = "csi0"; + }; + + /omit-if-no-ref/ + csi0_clk_pin: csi-clk-pin { + pins = "PE1"; + function = "csi0"; + }; + + /omit-if-no-ref/ + csi1_8bits_pg_pins: csi1-8bits-pg-pins { + pins = "PG0", "PG2", "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8", "PG9", "PG10", + "PG11"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_24bits_ph_pins: csi1-24bits-ph-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH8", "PH9", + "PH10", "PH11", "PH12", "PH13", "PH14", + "PH15", "PH16", "PH17", "PH18", "PH19", + "PH20", "PH21", "PH22", "PH23", "PH24", + "PH25", "PH26", "PH27"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_clk_pg_pin: csi1-clk-pg-pin { + pins = "PG1"; + function = "csi1"; + }; + + /omit-if-no-ref/ emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -775,6 +849,17 @@ function = "emac"; }; + /omit-if-no-ref/ + emac_ph_pins: emac-ph-pins { + pins = "PH8", "PH9", "PH10", "PH11", + "PH14", "PH15", "PH16", "PH17", + "PH18", "PH19", "PH20", "PH21", + "PH22", "PH23", "PH24", "PH25", + "PH26"; + function = "emac"; + }; + + /omit-if-no-ref/ gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -784,6 +869,7 @@ function = "gmac"; }; + /omit-if-no-ref/ gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -798,46 +884,69 @@ drive-strength = <40>; }; + /omit-if-no-ref/ i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; + /omit-if-no-ref/ i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; + /omit-if-no-ref/ i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; + /omit-if-no-ref/ i2c3_pins: i2c3-pins { pins = "PI0", "PI1"; function = "i2c3"; }; + /omit-if-no-ref/ ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; + /omit-if-no-ref/ ir0_tx_pin: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; + /omit-if-no-ref/ ir1_rx_pin: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; + /omit-if-no-ref/ ir1_tx_pin: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; + /omit-if-no-ref/ + lcd_lvds0_pins: lcd-lvds0-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD6", "PD7", "PD8", "PD9"; + function = "lvds0"; + }; + + /omit-if-no-ref/ + lcd_lvds1_pins: lcd-lvds1-pins { + pins = "PD10", "PD11", "PD12", "PD13", "PD14", + "PD15", "PD16", "PD17", "PD18", "PD19"; + function = "lvds1"; + }; + + /omit-if-no-ref/ mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -846,6 +955,7 @@ bias-pull-up; }; + /omit-if-no-ref/ mmc2_pins: mmc2-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; @@ -854,6 +964,7 @@ bias-pull-up; }; + /omit-if-no-ref/ mmc3_pins: mmc3-pins { pins = "PI4", "PI5", "PI6", "PI7", "PI8", "PI9"; @@ -862,127 +973,206 @@ bias-pull-up; }; + /omit-if-no-ref/ ps2_0_pins: ps2-0-pins { pins = "PI20", "PI21"; function = "ps2"; }; + /omit-if-no-ref/ ps2_1_ph_pins: ps2-1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; + /omit-if-no-ref/ pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; + /omit-if-no-ref/ pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; + /omit-if-no-ref/ spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; + /omit-if-no-ref/ spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; + /omit-if-no-ref/ spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; + /omit-if-no-ref/ spi0_cs1_pi_pin: spi0-cs1-pi-pin { pins = "PI14"; function = "spi0"; }; + /omit-if-no-ref/ spi1_pi_pins: spi1-pi-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; + /omit-if-no-ref/ spi1_cs0_pi_pin: spi1-cs0-pi-pin { pins = "PI16"; function = "spi1"; }; + /omit-if-no-ref/ spi2_pb_pins: spi2-pb-pins { pins = "PB15", "PB16", "PB17"; function = "spi2"; }; + /omit-if-no-ref/ spi2_cs0_pb_pin: spi2-cs0-pb-pin { pins = "PB14"; function = "spi2"; }; + /omit-if-no-ref/ spi2_pc_pins: spi2-pc-pins { pins = "PC20", "PC21", "PC22"; function = "spi2"; }; + /omit-if-no-ref/ spi2_cs0_pc_pin: spi2-cs0-pc-pin { pins = "PC19"; function = "spi2"; }; + /omit-if-no-ref/ uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; + /omit-if-no-ref/ + uart0_pf_pins: uart0-pf-pins { + pins = "PF2", "PF4"; + function = "uart0"; + }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA10", "PA11"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins { + pins = "PA12", "PA13"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart2_pa_pins: uart2-pa-pins { + pins = "PA2", "PA3"; + function = "uart2"; + }; + + /omit-if-no-ref/ + uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins { + pins = "PA0", "PA1"; + function = "uart2"; + }; + + /omit-if-no-ref/ uart2_pi_pins: uart2-pi-pins { pins = "PI18", "PI19"; function = "uart2"; }; + /omit-if-no-ref/ uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins { pins = "PI16", "PI17"; function = "uart2"; }; + /omit-if-no-ref/ uart3_pg_pins: uart3-pg-pins { pins = "PG6", "PG7"; function = "uart3"; }; + /omit-if-no-ref/ uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { pins = "PG8", "PG9"; function = "uart3"; }; + /omit-if-no-ref/ uart3_ph_pins: uart3-ph-pins { pins = "PH0", "PH1"; function = "uart3"; }; + /omit-if-no-ref/ + uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins { + pins = "PH2", "PH3"; + function = "uart3"; + }; + + /omit-if-no-ref/ uart4_pg_pins: uart4-pg-pins { pins = "PG10", "PG11"; function = "uart4"; }; + /omit-if-no-ref/ uart4_ph_pins: uart4-ph-pins { pins = "PH4", "PH5"; function = "uart4"; }; + /omit-if-no-ref/ + uart5_ph_pins: uart5-ph-pins { + pins = "PH6", "PH7"; + function = "uart5"; + }; + + /omit-if-no-ref/ uart5_pi_pins: uart5-pi-pins { pins = "PI10", "PI11"; function = "uart5"; }; + /omit-if-no-ref/ + uart6_pa_pins: uart6-pa-pins { + pins = "PA12", "PA13"; + function = "uart6"; + }; + + /omit-if-no-ref/ uart6_pi_pins: uart6-pi-pins { pins = "PI12", "PI13"; function = "uart6"; }; + /omit-if-no-ref/ + uart7_pa_pins: uart7-pa-pins { + pins = "PA14", "PA15"; + function = "uart7"; + }; + + /omit-if-no-ref/ uart7_pi_pins: uart7-pi-pins { pins = "PI20", "PI21"; function = "uart7"; @@ -1004,6 +1194,8 @@ wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + interrupts = ; + clocks = <&osc24M>; }; rtc: rtc@1c20d00 { @@ -1326,8 +1518,12 @@ snps,fixed-burst; snps,force_sf_dma_mode; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; + + gmac_mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; hstimer@1c60000 { @@ -1341,7 +1537,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, From patchwork Wed Apr 27 20:31:24 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623339 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=LcbhDivR; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=zqWeZZns; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpZFb6M7Jz9s5V for ; Thu, 28 Apr 2022 09:09:21 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id F2C0083B9F; Thu, 28 Apr 2022 01:09:06 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="LcbhDivR"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="zqWeZZns"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 8389B83D67; Wed, 27 Apr 2022 22:32:27 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-0.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,PDS_OTHER_BAD_TLD, RCVD_IN_MSPIKE_H3,RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=no autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 334CA806B7 for ; Wed, 27 Apr 2022 22:31:58 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute1.internal (compute1.nyi.internal [10.202.2.41]) by mailout.nyi.internal (Postfix) with ESMTP id 6429E5C01BD; Wed, 27 Apr 2022 16:31:57 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute1.internal (MEProxy); Wed, 27 Apr 2022 16:31:57 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:content-type:date:date:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm2; t=1651091517; x= 1651177917; bh=mliJkzctxkh2ZLqsU1QLfJE42sHgTNLGzG4vXgiHtSE=; b=L cbhDivRdPY1J/ypcKW5t/Yc2tkogqyJGJ+Ub/kpdeIiiIK3TI11HZ24EtuZRnqfn F0jZXRnEiEJGGXvPceO1p22uXbm1X6IIgK6mAaTUstESju7LSOWdQ2/vg/em9Sf6 NVTD62dJQTCOdEJVeZfLed1DCbvcIN2OENB67xyFRWEWRWtN61BJtfX5VO7Ui/Lc 4r1da+ij8TZr3khJ7ojqa6gOigk4Km6BO1usUBcWFnAolmzZXKftEV6T7gey8D+n ezWGe50UyNYFyDowYmLSmnJ2PMhMIlQjlUCfOipZEIrIcyW3Jb0oGysIrNoB6wbP NDz0LFaKpq2p3CxJkg3eg== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding :content-type:date:date:from:from:in-reply-to:in-reply-to :message-id:mime-version:references:reply-to:sender:subject :subject:to:to:x-me-proxy:x-me-proxy:x-me-sender:x-me-sender :x-sasl-enc; s=fm1; t=1651091517; x=1651177917; bh=mliJkzctxkh2Z LqsU1QLfJE42sHgTNLGzG4vXgiHtSE=; b=zqWeZZnsCGpm+Hekd/cEZ0iOFLWBc iVqR2CxWyXvg8BXKKlauQQQ+ju/LQG8mSHLdxyqxrHw7wH+uwcjUi3lfTXSbOm1o /Jdk6snG+JfhmyrMOU18Js9i9r1BkEkI7p5CDv9EZQHgtXy5gk7xw9q+shLMAXlX PdhX4LgADvRYiWAulEa4fcIlRUPeqU1sof40iKRj4DWrYSk6zb5D8gGGBPW28wbB s3lJ4lGJ7n/vFRNbE08ALtwqpS6TyU/WC11UQB9GFLwxjSzlKigWuqYzza8lLRRX 3vEbf33Qs8GVwozRJ47UZFEy9BNmO+Uo/n02BZMjLbz+e/wxBaoE3sPQg== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeejucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhggtgfgsehtkeertdertdejnecuhfhrohhmpefurghm uhgvlhcujfholhhlrghnugcuoehsrghmuhgvlhesshhhohhllhgrnhgurdhorhhgqeenuc ggtffrrghtthgvrhhnpeetudefheetfeehveejudejgeehgffgueekfefgtdegheetteeg udffhfeggfeuheenucffohhmrghinhepughtshhirdhtohenucevlhhushhtvghrufhiii gvpedtnecurfgrrhgrmhepmhgrihhlfhhrohhmpehsrghmuhgvlhesshhhohhllhgrnhgu rdhorhhg X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:31:56 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 05/12] ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1 Date: Wed, 27 Apr 2022 15:31:24 -0500 Message-Id: <20220427203132.47271-6-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-Mailman-Approved-At: Thu, 28 Apr 2022 01:09:03 +0200 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16 SoCs and all existing boards from the Linux v5.18-rc1 tag. These changes are combined into one commit due to interdependencies: - The unit addresses were removed from bitbanged I2C buses, which drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts and sun6i-a31-colombus.dts. - The pinctrl nodes were renamed, including some used by the shared header sunxi-reference-design-tablet.dtsi. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree. This commit also adds the following new board devicetrees: - sun5i-a13-licheepi-one.dts - sun5i-a13-pocketbook-touch-lux-3.dts - sun5i-gr8-evb.dts - sun8i-a23-ippo-q8h-v1.2.dts - sun8i-a23-ippo-q8h-v5.dts - sun8i-a33-et-q8-v1.6.dts - sun8i-a33-ippo-q8h-v1.2.dts - sun8i-r16-nintendo-super-nes-classic.dts As with the other SoCs, updates of note are conversion of GPIO pull-up from pinconf to GPIO flags and renaming the detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/Makefile | 10 +- arch/arm/dts/axp22x.dtsi | 11 +- arch/arm/dts/sun5i-a10s-auxtek-t003.dts | 16 +- arch/arm/dts/sun5i-a10s-auxtek-t004.dts | 35 +- arch/arm/dts/sun5i-a10s-mk802.dts | 31 +- arch/arm/dts/sun5i-a10s-olinuxino-micro.dts | 68 +--- arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts | 22 +- arch/arm/dts/sun5i-a10s-wobo-i5.dts | 34 +- arch/arm/dts/sun5i-a10s.dtsi | 30 +- arch/arm/dts/sun5i-a13-ampe-a76.dts | 2 +- .../dts/sun5i-a13-empire-electronix-d709.dts | 41 +-- arch/arm/dts/sun5i-a13-hsg-h702.dts | 37 +- arch/arm/dts/sun5i-a13-inet-86vs.dts | 2 +- arch/arm/dts/sun5i-a13-licheepi-one.dts | 214 +++++++++++ arch/arm/dts/sun5i-a13-olinuxino-micro.dts | 50 +-- arch/arm/dts/sun5i-a13-olinuxino.dts | 56 +-- .../dts/sun5i-a13-pocketbook-touch-lux-3.dts | 258 ++++++++++++++ arch/arm/dts/sun5i-a13-q8-tablet.dts | 18 +- arch/arm/dts/sun5i-a13-utoo-p66.dts | 26 +- arch/arm/dts/sun5i-a13.dtsi | 23 +- arch/arm/dts/sun5i-gr8-chip-pro.dts | 38 +- arch/arm/dts/sun5i-gr8-evb.dts | 333 ++++++++++++++++++ arch/arm/dts/sun5i-gr8.dtsi | 12 +- arch/arm/dts/sun5i-r8-chip.dts | 52 +-- .../dts/sun5i-reference-design-tablet.dtsi | 57 +-- arch/arm/dts/sun5i.dtsi | 209 +++++++---- arch/arm/dts/sun6i-a31-app4-evb1.dts | 10 +- arch/arm/dts/sun6i-a31-colombus.dts | 57 +-- arch/arm/dts/sun6i-a31-hummingbird.dts | 75 +--- arch/arm/dts/sun6i-a31-i7.dts | 47 +-- arch/arm/dts/sun6i-a31-m9.dts | 46 +-- arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts | 46 +-- arch/arm/dts/sun6i-a31-mixtile-loftq.dts | 6 +- arch/arm/dts/sun6i-a31.dtsi | 218 +++++++----- arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts | 2 +- arch/arm/dts/sun6i-a31s-cs908.dts | 17 +- arch/arm/dts/sun6i-a31s-inet-q972.dts | 8 +- arch/arm/dts/sun6i-a31s-primo81.dts | 32 +- arch/arm/dts/sun6i-a31s-sina31s-core.dtsi | 4 +- arch/arm/dts/sun6i-a31s-sina31s.dts | 39 +- arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 144 +++++--- .../sun6i-a31s-yones-toptech-bs1078-v2.dts | 22 +- .../dts/sun6i-reference-design-tablet.dtsi | 22 +- arch/arm/dts/sun8i-a23-a33.dtsi | 308 ++++++++++++---- arch/arm/dts/sun8i-a23-evb.dts | 20 +- arch/arm/dts/sun8i-a23-gt90h-v4.dts | 2 +- arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts | 73 ++++ arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts | 73 ++++ .../dts/sun8i-a23-polaroid-mid2407pxe03.dts | 15 +- .../dts/sun8i-a23-polaroid-mid2809pxe04.dts | 15 +- arch/arm/dts/sun8i-a23-q8-tablet.dts | 10 + arch/arm/dts/sun8i-a23.dtsi | 26 +- ...c-edition.dts => sun8i-a33-et-q8-v1.6.dts} | 32 +- arch/arm/dts/sun8i-a33-ga10h-v1.1.dts | 4 +- arch/arm/dts/sun8i-a33-inet-d978-rev2.dts | 14 +- arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts | 57 +++ arch/arm/dts/sun8i-a33-olinuxino.dts | 12 +- arch/arm/dts/sun8i-a33-q8-tablet.dts | 7 + arch/arm/dts/sun8i-a33-sinlinx-sina33.dts | 34 +- arch/arm/dts/sun8i-a33.dtsi | 270 +++++--------- arch/arm/dts/sun8i-q8-common.dtsi | 31 +- arch/arm/dts/sun8i-r16-bananapi-m2m.dts | 55 ++- .../dts/sun8i-r16-nintendo-nes-classic.dts | 54 +++ .../sun8i-r16-nintendo-super-nes-classic.dts | 11 + arch/arm/dts/sun8i-r16-parrot.dts | 62 +--- .../dts/sun8i-reference-design-tablet.dtsi | 33 +- arch/arm/dts/sunxi-common-regulators.dtsi | 39 -- .../dts/sunxi-reference-design-tablet.dtsi | 11 +- arch/arm/mach-sunxi/Kconfig | 2 +- .../Nintendo_NES_Classic_Edition_defconfig | 2 +- 70 files changed, 2149 insertions(+), 1603 deletions(-) create mode 100644 arch/arm/dts/sun5i-a13-licheepi-one.dts create mode 100644 arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts create mode 100644 arch/arm/dts/sun5i-gr8-evb.dts create mode 100644 arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts create mode 100644 arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts rename arch/arm/dts/{sun8i-r16-nintendo-nes-classic-edition.dts => sun8i-a33-et-q8-v1.6.dts} (81%) create mode 100644 arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts create mode 100644 arch/arm/dts/sun8i-r16-nintendo-nes-classic.dts create mode 100644 arch/arm/dts/sun8i-r16-nintendo-super-nes-classic.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 7120d6a3aa..6433f63455 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -555,11 +555,14 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-86vs.dtb \ sun5i-a13-inet-98v-rev2.dtb \ + sun5i-a13-licheepi-one.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-pocketbook-touch-lux-3.dtb \ sun5i-a13-q8-tablet.dtb \ sun5i-a13-utoo-p66.dtb \ sun5i-gr8-chip-pro.dtb \ + sun5i-gr8-evb.dtb \ sun5i-r8-chip.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ @@ -614,17 +617,22 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \ sun8i-a23-evb.dtb \ sun8i-a23-gt90h-v4.dtb \ sun8i-a23-inet86dz.dtb \ + sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-polaroid-mid2407pxe03.dtb \ sun8i-a23-polaroid-mid2809pxe04.dtb \ sun8i-a23-q8-tablet.dtb dtb-$(CONFIG_MACH_SUN8I_A33) += \ + sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-inet-d978-rev2.dtb \ + sun8i-a33-ippo-q8h-v1.2.dtb \ sun8i-a33-olinuxino.dtb \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-r16-bananapi-m2m.dtb \ - sun8i-r16-nintendo-nes-classic-edition.dtb \ + sun8i-r16-nintendo-nes-classic.dtb \ + sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb dtb-$(CONFIG_MACH_SUN8I_A83T) += \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ diff --git a/arch/arm/dts/axp22x.dtsi b/arch/arm/dts/axp22x.dtsi index 87fb08e812..a020c12b28 100644 --- a/arch/arm/dts/axp22x.dtsi +++ b/arch/arm/dts/axp22x.dtsi @@ -52,12 +52,17 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp221-ac-power-supply"; status = "disabled"; }; - battery_power_supply: battery-power-supply { + axp_adc: adc { + compatible = "x-powers,axp221-adc"; + #io-channel-cells = <1>; + }; + + battery_power_supply: battery-power { compatible = "x-powers,axp221-battery-power-supply"; status = "disabled"; }; @@ -158,7 +163,7 @@ }; }; - usb_power_supply: usb_power_supply { + usb_power_supply: usb-power { compatible = "x-powers,axp221-usb-power-supply"; status = "disabled"; }; diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/dts/sun5i-a10s-auxtek-t003.dts index 39504d720e..04b0e6d287 100644 --- a/arch/arm/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/dts/sun5i-a10s-auxtek-t003.dts @@ -62,7 +62,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_t003>; - red { + led { label = "t003-tv-dongle:red:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ default-state = "on"; @@ -75,8 +75,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -89,8 +87,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -106,13 +102,7 @@ }; &pio { - mmc0_cd_pin_t003: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_t003: led_pins@0 { + led_pins_t003: led-pin { pins = "PB2"; function = "gpio_out"; drive-strength = <20>; @@ -131,7 +121,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts index 8d4fb93312..667bc2dc1e 100644 --- a/arch/arm/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/dts/sun5i-a10s-auxtek-t004.dts @@ -62,7 +62,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_t004>; - red { + led { label = "t004-tv-dongle:red:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ default-state = "on"; @@ -71,8 +71,6 @@ reg_vmmc1: vmmc1 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_vcc_en_pin_t004>; regulator-name = "vmmc1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -86,8 +84,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -100,8 +96,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -109,8 +103,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vmmc1>; bus-width = <4>; non-removable; @@ -127,24 +119,7 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PG12"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc0_cd_pin_t004: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { - pins = "PB18"; - function = "gpio_out"; - }; - - led_pins_t004: led_pins@0 { + led_pins_t004: led-pin { pins = "PB2"; function = "gpio_out"; drive-strength = <20>; @@ -158,7 +133,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; @@ -168,9 +143,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a10s-mk802.dts b/arch/arm/dts/sun5i-a10s-mk802.dts index dd7fd5c3d7..d0219404c2 100644 --- a/arch/arm/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/dts/sun5i-a10s-mk802.dts @@ -59,10 +59,8 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_mk802>; - red { + led { label = "mk802:red:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ }; @@ -74,8 +72,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -88,8 +84,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -97,8 +91,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; @@ -113,33 +105,14 @@ status = "okay"; }; -&pio { - led_pins_mk802: led_pins@0 { - pins = "PB2"; - function = "gpio_out"; - }; - - mmc0_cd_pin_mk802: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_mk802: usb1_vbus_pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_mk802>; gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts index 2c902ed2c8..5832bb31fc 100644 --- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts @@ -79,7 +79,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxino>; - green { + led { label = "a10s-olinuxino-micro:green:usr"; gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -97,8 +97,8 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_b>; - phy = <&phy1>; + pinctrl-0 = <&emac_pa_pins>; + phy-handle = <&phy1>; status = "okay"; }; @@ -117,8 +117,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp152: pmic@30 { @@ -130,11 +128,9 @@ #include "axp152.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c16"; pagesize = <16>; reg = <0x50>; @@ -143,8 +139,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -152,35 +146,35 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@191 { + button-191 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <191274>; }; - button@392 { + button-392 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <392644>; }; - button@601 { + button-601 { label = "Menu"; linux,code = ; channel = <0>; voltage = <601151>; }; - button@795 { + button-795 { label = "Enter"; linux,code = ; channel = <0>; voltage = <795090>; }; - button@987 { + button-987 { label = "Home"; linux,code = ; channel = <0>; @@ -197,8 +191,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -206,8 +198,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */ @@ -223,34 +213,11 @@ }; &pio { - mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - pins = "PG13"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxino: led_pins@0 { + led_pins_olinuxino: led-pin { pins = "PE3"; function = "gpio_out"; drive-strength = <20>; }; - - usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PG12"; - function = "gpio_in"; - bias-pull-up; - }; }; ®_usb0_vbus { @@ -259,15 +226,14 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>, - <&spi2_cs0_pins_b>; + pinctrl-0 = <&spi2_pb_pins>, + <&spi2_cs0_pb_pin>; status = "okay"; }; @@ -277,19 +243,19 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_b>; + pinctrl-0 = <&uart2_pc_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; + pinctrl-0 = <&uart3_pg_pins>; status = "okay"; }; @@ -299,9 +265,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts index 034853d1c0..964360f061 100644 --- a/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts @@ -63,7 +63,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_r7>; - green { + led { label = "r7-tv-dongle:green:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -76,8 +76,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ @@ -85,8 +83,6 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; @@ -98,33 +94,21 @@ }; &pio { - mmc0_cd_pin_r7: mmc0_cd_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_r7: led_pins@0 { + led_pins_r7: led-pin { pins = "PB2"; function = "gpio_out"; drive-strength = <20>; }; - - usb1_vbus_pin_r7: usb1_vbus_pin@0 { - pins = "PG13"; - function = "gpio_out"; - }; }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_r7>; gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/dts/sun5i-a10s-wobo-i5.dts index 3f68ef5d92..ef8baa9926 100644 --- a/arch/arm/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/dts/sun5i-a10s-wobo-i5.dts @@ -61,10 +61,8 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_wobo_i5>; - blue { + led { label = "a10s-wobo-i5:blue:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -73,8 +71,6 @@ reg_emac_3v3: emac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&emac_power_pin_wobo>; regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -94,8 +90,8 @@ &emac { pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; + pinctrl-0 = <&emac_pd_pins>; + phy-handle = <&phy1>; status = "okay"; }; @@ -104,8 +100,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -126,8 +120,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */ @@ -142,24 +134,6 @@ status = "okay"; }; -&pio { - led_pins_wobo_i5: led_pins@0 { - pins = "PB2"; - function = "gpio_out"; - }; - - mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { - pins = "PB3"; - function = "gpio_in"; - bias-pull-up; - }; - - emac_power_pin_wobo: emac_power_pin@0 { - pins = "PA02"; - function = "gpio_out"; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -206,7 +180,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a10s.dtsi b/arch/arm/dts/sun5i-a10s.dtsi index 316cb8b294..09c486b608 100644 --- a/arch/arm/dts/sun5i-a10s.dtsi +++ b/arch/arm/dts/sun5i-a10s.dtsi @@ -42,15 +42,11 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include "sun5i.dtsi" #include / { - interrupt-parent = <&intc>; - aliases { ethernet0 = &emac; }; @@ -60,7 +56,7 @@ #size-cells = <1>; ranges; - framebuffer@2 { + framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -76,7 +72,7 @@ allwinner,pipelines = <&fe0>; }; - soc@1c00000 { + soc { hdmi: hdmi@1c16000 { compatible = "allwinner,sun5i-a10s-hdmi"; reg = <0x01c16000 0x1000>; @@ -104,8 +100,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -125,20 +119,25 @@ compatible = "allwinner,sun5i-a10s-ccu"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; + &pio { compatible = "allwinner,sun5i-a10s-pinctrl"; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB19", "PB20"; function = "uart0"; }; - uart2_pins_b: uart2@1 { + uart2_pc_pins: uart2-pc-pins { pins = "PC18", "PC19"; function = "uart2"; }; - emac_pins_b: emac0@1 { + emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -147,27 +146,24 @@ function = "emac"; }; - mmc1_pins_a: mmc1@0 { + mmc1_pins: mmc1-pins { pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; function = "mmc1"; drive-strength = <30>; }; - spi2_pins_b: spi2@1 { + spi2_pb_pins: spi2-pb-pins { pins = "PB12", "PB13", "PB14"; function = "spi2"; }; - spi2_cs0_pins_b: spi2_cs0@1 { + spi2_cs0_pb_pin: spi2-cs0-pb-pin { pins = "PB11"; function = "spi2"; }; }; -&sram_a { -}; - &tcon0_out { tcon0_out_hdmi: endpoint@2 { reg = <2>; diff --git a/arch/arm/dts/sun5i-a13-ampe-a76.dts b/arch/arm/dts/sun5i-a13-ampe-a76.dts index 1bf88816c3..7bc35329a5 100644 --- a/arch/arm/dts/sun5i-a13-ampe-a76.dts +++ b/arch/arm/dts/sun5i-a13-ampe-a76.dts @@ -23,6 +23,6 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts index 378214d831..d059388d72 100644 --- a/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/dts/sun5i-a13-empire-electronix-d709.dts @@ -61,6 +61,7 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; + power-supply = <®_vcc3v3>; /* TODO: backlight uses axp gpio1 as enable pin */ }; @@ -78,8 +79,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -91,8 +90,6 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; pcf8563: rtc@51 { @@ -105,14 +102,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = ; channel = <0>; @@ -121,8 +118,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -133,29 +128,9 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_d709: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -197,7 +172,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; @@ -207,10 +182,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; status = "okay"; diff --git a/arch/arm/dts/sun5i-a13-hsg-h702.dts b/arch/arm/dts/sun5i-a13-hsg-h702.dts index 7ee0c3f6d7..9b9f2a5748 100644 --- a/arch/arm/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/dts/sun5i-a13-hsg-h702.dts @@ -69,8 +69,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -80,8 +78,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; pcf8563: rtc@51 { @@ -91,8 +87,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -100,14 +94,14 @@ vref-supply = <®_ldo2>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = ; channel = <0>; @@ -116,8 +110,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -132,25 +124,6 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_h702: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PG1"; - function = "gpio_in"; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -191,7 +164,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; @@ -201,9 +174,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/dts/sun5i-a13-inet-86vs.dts b/arch/arm/dts/sun5i-a13-inet-86vs.dts index aef733b3fe..9c43a34d99 100644 --- a/arch/arm/dts/sun5i-a13-inet-86vs.dts +++ b/arch/arm/dts/sun5i-a13-inet-86vs.dts @@ -23,6 +23,6 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a13-licheepi-one.dts b/arch/arm/dts/sun5i-a13-licheepi-one.dts new file mode 100644 index 0000000000..2ce361f8fe --- /dev/null +++ b/arch/arm/dts/sun5i-a13-licheepi-one.dts @@ -0,0 +1,214 @@ +/* + * Copyright 2016 Icenowy Zheng + * + * Based on sun5i-a13-olinuxino.dts, which is + * Copyright 2012 Maxime Ripard + * Copyright 2013 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "Lichee Pi One"; + compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label ="licheepi:red:usr"; + gpios = <&pio 2 5 GPIO_ACTIVE_LOW>; + }; + + led-1 { + label ="licheepi:green:usr"; + gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-2 { + label ="licheepi:blue:usr"; + gpios = <&pio 2 4 GPIO_ACTIVE_LOW>; + }; + + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-984 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <984126>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pc_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "csi-1.8v"; +}; + +®_ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "csi-2.8v"; +}; + +®_usb0_vbus { + gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pg_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts index aa4b34fd91..bfe1075e62 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts @@ -64,7 +64,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinom>; - power { + led { label = "a13-olinuxino-micro:green:power"; gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -77,26 +77,18 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -112,56 +104,26 @@ }; &pio { - mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxinom: led_pins@0 { + led_pins_olinuxinom: led-pin { pins = "PG9"; function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { - pins = "PG12"; - function = "gpio_out"; - }; - - usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - pins = "PG11"; - function = "gpio_out"; - }; }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_olinuxinom>; gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; @@ -171,10 +133,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun5i-a13-olinuxino.dts b/arch/arm/dts/sun5i-a13-olinuxino.dts index 437ad913a3..fadeae3cd8 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino.dts @@ -66,7 +66,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxino>; - power { + led { gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; @@ -74,8 +74,6 @@ bridge { compatible = "dumb-vga-dac"; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; @@ -123,8 +121,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -138,14 +134,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -153,35 +145,35 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@191 { + button-191 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <191274>; }; - button@392 { + button-392 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <392644>; }; - button@601 { + button-601 { label = "Menu"; linux,code = ; channel = <0>; voltage = <601151>; }; - button@795 { + button-795 { label = "Enter"; linux,code = ; channel = <0>; voltage = <795090>; }; - button@987 { + button-987 { label = "Home"; linux,code = ; channel = <0>; @@ -190,8 +182,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -207,34 +197,11 @@ }; &pio { - mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxino: led_pins@0 { + led_pins_olinuxino: led-pin { pins = "PG9"; function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - pins = "PG11"; - function = "gpio_out"; - }; }; ®_usb0_vbus { @@ -243,7 +210,6 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -263,7 +229,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; @@ -273,10 +239,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts new file mode 100644 index 0000000000..d60407772e --- /dev/null +++ b/arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright 2019 Ondrej Jirman + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include +#include +#include + +/ { + model = "PocketBook Touch Lux 3"; + compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + power-supply = <®_vcc3v3>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led { + gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ + default-state = "on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + label = "GPIO Keys"; + + key-right { + label = "Right"; + linux,code = ; + gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */ + }; + + key-left { + label = "Left"; + linux,code = ; + gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */ + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vdd-1v8-nor-ctp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_1v8_nor: regulator-nor { + compatible = "regulator-fixed"; + regulator-name = "vdd-nor"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_1v8>; + regulator-always-on; + }; + + reg_1v8_ctp: regulator-ctp { + compatible = "regulator-fixed"; + regulator-name = "vdd-ctp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_1v8>; + }; + + reg_3v3_mmc0: regulator-mmc0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-mmc0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */ + vin-supply = <®_vcc3v3>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + status = "okay"; + + /* Touchpanel is connected here. */ +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-200 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button-400 { + label = "Menu"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_3v3_mmc0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pc_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + /* We need this otherwise the LDO3 would overload */ + regulator-soft-start; + regulator-ramp-delay = <1600>; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>; + status = "okay"; + + epd_flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "macronix,mx25u4033", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <4000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pg_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun5i-a13-q8-tablet.dts b/arch/arm/dts/sun5i-a13-q8-tablet.dts index a89f29fa3e..f9fc1c8b60 100644 --- a/arch/arm/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/dts/sun5i-a13-q8-tablet.dts @@ -49,19 +49,13 @@ compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; panel: panel { - compatible = "urt,umsh-8596md-t", "simple-panel"; - #address-cells = <1>; - #size-cells = <0>; + compatible = "bananapi,s070wv20-ct16"; + power-supply = <®_vcc3v3>; + enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */ + backlight = <&backlight>; - port@0 { - reg = <0>; - /* TODO: lcd panel uses axp gpio0 as enable pin */ - backlight = <&backlight>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_lcd>; }; }; diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts index bfdd38d6bf..be486d28d0 100644 --- a/arch/arm/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts @@ -58,13 +58,11 @@ /delete-property/stdout-path; }; - i2c_lcd: i2c@0 { + i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_lcd_pins>; - gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */ - <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */ + sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ + scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */ i2c-gpio,delay-us = <5>; }; }; @@ -79,13 +77,9 @@ allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ }; -&codec_pa_pin { - pins = "PG3"; -}; - &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_8bit_pins>; vmmc-supply = <®_vcc3v3>; bus-width = <8>; non-removable; @@ -98,14 +92,6 @@ }; }; -&pio { - i2c_lcd_pins: i2c_lcd_pin@0 { - pins = "PG10", "PG12"; - function = "gpio_out"; - bias-pull-up; - }; -}; - ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ }; @@ -128,7 +114,3 @@ /* The P66 uses the uart pins as gpios */ status = "disabled"; }; - -&usb0_vbus_pin_a { - pins = "PB4"; -}; diff --git a/arch/arm/dts/sun5i-a13.dtsi b/arch/arm/dts/sun5i-a13.dtsi index b1d8277655..3325ab0709 100644 --- a/arch/arm/dts/sun5i-a13.dtsi +++ b/arch/arm/dts/sun5i-a13.dtsi @@ -42,17 +42,13 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include "sun5i.dtsi" #include / { - interrupt-parent = <&intc>; - thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; @@ -88,7 +84,7 @@ allwinner,pipelines = <&fe0>; }; - soc@1c00000 { + soc { pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; @@ -106,15 +102,14 @@ &cpu0 { clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1200000 - 576000 1200000 - 432000 1200000 - >; + <1008000 1400000>, + <912000 1350000>, + <864000 1300000>, + <624000 1200000>, + <576000 1200000>, + <432000 1200000>; #cooling-cells = <2>; }; diff --git a/arch/arm/dts/sun5i-gr8-chip-pro.dts b/arch/arm/dts/sun5i-gr8-chip-pro.dts index c55b11a4d3..a32cde3e32 100644 --- a/arch/arm/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/dts/sun5i-gr8-chip-pro.dts @@ -79,8 +79,6 @@ mmc0_pwrseq: mmc0_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_reg_on_pin_chip_pro>; reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ }; }; @@ -94,8 +92,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -114,20 +110,16 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "disabled"; }; &i2s0 { pinctrl-names = "default"; - pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>; + pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>; status = "disabled"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc0_pwrseq>; bus-width = <4>; @@ -137,12 +129,10 @@ &nfc { pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; status = "okay"; nand@0 { - #address-cells = <2>; - #size-cells = <2>; reg = <0>; allwinner,rb = <0>; nand-ecc-mode = "hw"; @@ -157,21 +147,9 @@ status = "okay"; }; -&pio { - usb0_id_pin_chip_pro: usb0-id-pin@0 { - pins = "PG2"; - function = "gpio_in"; - }; - - wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; -}; - &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>; + pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>; status = "disabled"; }; @@ -220,19 +198,19 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>; + pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>; status = "disabled"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>; status = "okay"; }; @@ -253,9 +231,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pin_chip_pro>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/arch/arm/dts/sun5i-gr8-evb.dts b/arch/arm/dts/sun5i-gr8-evb.dts new file mode 100644 index 0000000000..f4fe258ef0 --- /dev/null +++ b/arch/arm/dts/sun5i-gr8-evb.dts @@ -0,0 +1,333 @@ +/* + * Copyright 2016 Free Electrons + * Copyright 2016 NextThing Co + * + * Mylène Josserand + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-gr8.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "NextThing GR8-EVB"; + compatible = "nextthing,gr8-evb", "nextthing,gr8"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 10000 0>; + enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; + power-supply = <®_vcc3v3>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + }; + + sound-analog { + compatible = "simple-audio-card"; + simple-audio-card,name = "gr8-evb-wm8978"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8978>; + }; + }; + + sound-spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&be0 { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + + /* + * The interrupt is routed through the "External Fast + * Interrupt Request" pin (ball G13 of the module) + * directly to the main interrupt controller, without + * any other controller interfering. + */ + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + status = "okay"; + + wm8978: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2s0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pin>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-190 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <190000>; + }; + + button-390 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <390000>; + }; + + button-600 { + label = "Menu"; + linux,code = ; + channel = <0>; + voltage = <600000>; + }; + + button-800 { + label = "Search"; + linux,code = ; + channel = <0>; + voltage = <800000>; + }; + + button-980 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <980000>; + }; + + button-1180 { + label = "Esc"; + linux,code = ; + channel = <0>; + voltage = <1180000>; + }; + + button-1400 { + label = "Enter"; + linux,code = ; + channel = <0>; + voltage = <1400000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + status = "okay"; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; + + /* MLC Support sucks for now */ + status = "disabled"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +®_dcdc2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; + regulator-always-on; +}; + +®_dcdc3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; + regulator-always-on; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; + regulator-always-on; +}; + +®_usb1_vbus { + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&rtp { + allwinner,ts-attached; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; + status = "okay"; +}; + +&tve0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>; + status = "okay"; +}; + +&usb_otg { + /* + * The GR8-EVB has a somewhat interesting design. There's a + * pin supposed to control VBUS, an ID pin, a VBUS detect pin, + * so everything should work just fine. + * + * Except that the pin supposed to control VBUS is not + * connected to any controllable output, neither to the SoC + * through a GPIO or to the PMIC, and it is pulled down, + * meaning that we will never be able to enable VBUS on this + * board. + */ + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun5i-gr8.dtsi b/arch/arm/dts/sun5i-gr8.dtsi index ef0b7446a9..98a8fd5e89 100644 --- a/arch/arm/dts/sun5i-gr8.dtsi +++ b/arch/arm/dts/sun5i-gr8.dtsi @@ -54,7 +54,7 @@ allwinner,pipelines = <&fe0>; }; - soc@1c00000 { + soc { pwm: pwm@1c20e00 { compatible = "allwinner,sun5i-a10s-pwm"; reg = <0x01c20e00 0xc>; @@ -98,28 +98,28 @@ &pio { compatible = "nextthing,gr8-pinctrl"; - i2s0_data_pins_a: i2s0-data@0 { + i2s0_data_pins: i2s0-data-pins { pins = "PB6", "PB7", "PB8", "PB9"; function = "i2s0"; }; - i2s0_mclk_pins_a: i2s0-mclk@0 { + i2s0_mclk_pin: i2s0-mclk-pin { pins = "PB5"; function = "i2s0"; }; - pwm1_pins: pwm1 { + pwm1_pins: pwm1-pin { pins = "PG13"; function = "pwm1"; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PB10"; function = "spdif"; bias-pull-up; }; - uart1_cts_rts_pins_a: uart1-cts-rts@0 { + uart1_cts_rts_pins: uart1-cts-rts-pins { pins = "PG5", "PG6"; function = "uart1"; }; diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts index 879a4b0f3b..4bf4943d4e 100644 --- a/arch/arm/dts/sun5i-r8-chip.dts +++ b/arch/arm/dts/sun5i-r8-chip.dts @@ -79,16 +79,12 @@ mmc0_pwrseq: mmc0_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&chip_wifi_reg_on_pin>; reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ }; onewire { compatible = "w1-gpio"; - gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ - pinctrl-names = "default"; - pinctrl-0 = <&chip_w1_pin>; + gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */ }; }; @@ -109,8 +105,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -137,14 +131,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "disabled"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; xio: gpio@38 { @@ -161,13 +151,11 @@ }; }; -&mmc0_pins_a { +&mmc0_pins { bias-pull-up; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc0_pwrseq>; bus-width = <4>; @@ -183,29 +171,6 @@ status = "okay"; }; -&pio { - chip_vbus_pin: chip_vbus_pin@0 { - pins = "PB10"; - function = "gpio_out"; - }; - - chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 { - pins = "PC19"; - function = "gpio_out"; - }; - - chip_id_det_pin: chip_id_det_pin@0 { - pins = "PG2"; - function = "gpio_in"; - }; - - chip_w1_pin: chip_w1_pin@0 { - pins = "PD2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; @@ -260,7 +225,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&chip_vbus_pin>; vin-supply = <®_vcc5v0>; gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ status = "okay"; @@ -268,7 +232,7 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; + pinctrl-0 = <&spi2_pe_pins>; status = "disabled"; }; @@ -282,14 +246,14 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>, - <&uart3_cts_rts_pins_a>; + pinctrl-0 = <&uart3_pg_pins>, + <&uart3_cts_rts_pg_pins>; status = "okay"; }; @@ -303,11 +267,9 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&chip_id_det_pin>; status = "okay"; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_vcc5v0>; diff --git a/arch/arm/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/dts/sun5i-reference-design-tablet.dtsi index 8acbaab14f..6847f66699 100644 --- a/arch/arm/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/dts/sun5i-reference-design-tablet.dtsi @@ -54,7 +54,8 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ + enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */ + power-supply = <®_vcc3v0>; }; chosen { @@ -63,8 +64,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ status = "okay"; }; @@ -92,11 +91,10 @@ */ clock-frequency = <400000>; - touchscreen: touchscreen { + touchscreen: touchscreen@40 { + reg = <0x40>; interrupt-parent = <&pio>; interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin>; power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ /* Tablet dts must provide reg and compatible */ status = "disabled"; @@ -124,7 +122,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ @@ -135,43 +133,6 @@ status = "okay"; }; -&pio { - codec_pa_pin: codec_pa_pin@0 { - pins = "PG10"; - function = "gpio_out"; - }; - - mmc0_cd_pin: mmc0_cd_pin@0 { - pins = "PG0"; - function = "gpio_in"; - bias-pull-up; - }; - - ts_power_pin: ts_power_pin { - pins = "PB3"; - function = "gpio_out"; - drive-strength = <10>; - bias-disable; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - pins = "PG12"; - function = "gpio_out"; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -210,7 +171,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; + pinctrl-0 = <&uart1_pg_pins>; status = "okay"; }; @@ -224,10 +185,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi index 07f2248ed5..250d6b87ab 100644 --- a/arch/arm/dts/sun5i.dtsi +++ b/arch/arm/dts/sun5i.dtsi @@ -42,14 +42,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include #include #include / { interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; @@ -68,7 +68,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -77,7 +77,7 @@ status = "disabled"; }; - framebuffer@1 { + framebuffer-lcd0-tve0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; @@ -93,14 +93,14 @@ #size-cells = <1>; ranges; - osc24M: clk@1c20050 { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -108,14 +108,30 @@ }; }; - soc@1c00000 { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + default-pool { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x40000000 0x10000000>; + reusable; + linux,cma-default; + }; + }; + + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + dma-ranges; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun5i-a13-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -127,12 +143,13 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00000000 0xc000>; - }; - emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; - reg = <0x8000 0x4000>; - status = "disabled"; + emac_sram: sram-section@8000 { + compatible = "allwinner,sun5i-a13-sram-a3-a4", + "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; }; sram_d: sram@10000 { @@ -143,11 +160,36 @@ ranges = <0 0x00010000 0x1000>; otg_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-d"; + compatible = "allwinner,sun5i-a13-sram-d", + "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun5i-a13-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + + mbus: dram-controller@1c01000 { + compatible = "allwinner,sun5i-a13-mbus"; + reg = <0x01c01000 0x1000>; + clocks = <&ccu CLK_MBUS>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x00000000 0x40000000 0x20000000>; + #interconnect-cells = <1>; }; dma: dma-controller@1c02000 { @@ -158,7 +200,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -207,11 +249,8 @@ status = "disabled"; port { - #address-cells = <1>; - #size-cells = <0>; - tve0_in_tcon0: endpoint@0 { - reg = <0>; + tve0_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_tve0>; }; }; @@ -238,6 +277,7 @@ compatible = "allwinner,sun5i-a13-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <44>; + dmas = <&dma SUN4I_DMA_DEDICATED 14>; resets = <&ccu RST_LCD>; reset-names = "lcd"; clocks = <&ccu CLK_AHB_LCD>, @@ -247,6 +287,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; status = "disabled"; ports { @@ -254,12 +295,9 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_be0: endpoint@0 { - reg = <0>; + tcon0_in_be0: endpoint { remote-endpoint = <&be0_out_tcon0>; }; }; @@ -278,12 +316,25 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun5i-a13-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <53>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; clock-names = "ahb", "mmc"; interrupts = <32>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -321,13 +372,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; @@ -404,7 +456,7 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - emac_pins_a: emac0@0 { + emac_pd_pins: emac-pd-pins { pins = "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", @@ -413,27 +465,27 @@ function = "emac"; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PB15", "PB16"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PB17", "PB18"; function = "i2c2"; }; - ir0_rx_pins_a: ir0@0 { + ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; - lcd_rgb565_pins: lcd_rgb565@0 { + lcd_rgb565_pins: lcd-rgb565-pins { pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD19", "PD20", "PD21", "PD22", "PD23", @@ -441,7 +493,7 @@ function = "lcd0"; }; - lcd_rgb666_pins: lcd_rgb666@0 { + lcd_rgb666_pins: lcd-rgb666-pins { pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", @@ -449,7 +501,7 @@ function = "lcd0"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -457,24 +509,24 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", "PC13", - "PC14", "PC15"; + "PC10", "PC11"; function = "mmc2"; drive-strength = <30>; bias-pull-up; }; - mmc2_4bit_pins_a: mmc2-4bit@0 { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11"; + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; function = "mmc2"; drive-strength = <30>; bias-pull-up; }; - nand_pins_a: nand-base0@0 { + nand_pins: nand-pins { pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -482,72 +534,79 @@ function = "nand0"; }; - nand_cs0_pins_a: nand-cs@0 { + nand_cs0_pin: nand-cs0-pin { pins = "PC4"; function = "nand0"; }; - nand_rb0_pins_a: nand-rb@0 { + nand_rb0_pin: nand-rb0-pin { pins = "PC6"; function = "nand0"; }; - spi2_pins_a: spi2@0 { + pwm0_pin: pwm0-pin { + pins = "PB2"; + function = "pwm"; + }; + + spi2_pe_pins: spi2-pe-pins { pins = "PE1", "PE2", "PE3"; function = "spi2"; }; - spi2_cs0_pins_a: spi2-cs0@0 { + spi2_cs0_pe_pin: spi2-cs0-pe-pin { pins = "PE0"; function = "spi2"; }; - uart1_pins_a: uart1@0 { + uart1_pe_pins: uart1-pe-pins { pins = "PE10", "PE11"; function = "uart1"; }; - uart1_pins_b: uart1@1 { + uart1_pg_pins: uart1-pg-pins { pins = "PG3", "PG4"; function = "uart1"; }; - uart2_pins_a: uart2@0 { + uart2_pd_pins: uart2-pd-pins { pins = "PD2", "PD3"; function = "uart2"; }; - uart2_cts_rts_pins_a: uart2-cts-rts@0 { + uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins { pins = "PD4", "PD5"; function = "uart2"; }; - uart3_pins_a: uart3@0 { + uart3_pg_pins: uart3-pg-pins { pins = "PG9", "PG10"; function = "uart3"; }; - uart3_cts_rts_pins_a: uart3-cts-rts@0 { + uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { pins = "PG11", "PG12"; function = "uart3"; }; - - pwm0_pins: pwm0 { - pins = "PB2"; - function = "pwm"; - }; }; timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0x90>; - interrupts = <22>; + interrupts = <22>, + <23>, + <24>, + <25>, + <67>, + <68>; clocks = <&ccu CLK_HOSC>; }; wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + interrupts = <24>; + clocks = <&osc24M>; }; ir0: ir@1c21800 { @@ -636,6 +695,8 @@ reg = <0x01c2ac00 0x400>; interrupts = <7>; clocks = <&ccu CLK_APB1_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -646,6 +707,8 @@ reg = <0x01c2b000 0x400>; interrupts = <8>; clocks = <&ccu CLK_APB1_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -656,11 +719,25 @@ reg = <0x01c2b400 0x400>; interrupts = <9>; clocks = <&ccu CLK_APB1_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <69>, <70>, <71>, <72>, <73>; + interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu"; + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_GPU>; + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <320000000>; + }; + timer@1c60000 { compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; @@ -677,6 +754,8 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_FE>; + interconnects = <&mbus 19>; + interconnect-names = "dma-mem"; status = "disabled"; ports { @@ -684,12 +763,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_be0: endpoint@0 { - reg = <0>; + fe0_out_be0: endpoint { remote-endpoint = <&be0_in_fe0>; }; }; @@ -705,33 +781,26 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_BE>; + interconnects = <&mbus 18>; + interconnect-names = "dma-mem"; status = "disabled"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - be0_in_fe0: endpoint@0 { - reg = <0>; + be0_in_fe0: endpoint { remote-endpoint = <&fe0_out_be0>; }; }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_tcon0: endpoint@0 { - reg = <0>; + be0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_be0>; }; }; diff --git a/arch/arm/dts/sun6i-a31-app4-evb1.dts b/arch/arm/dts/sun6i-a31-app4-evb1.dts index 7f34323a66..32d22025ac 100644 --- a/arch/arm/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/dts/sun6i-a31-app4-evb1.dts @@ -65,22 +65,14 @@ status = "okay"; }; -&pio { - usb1_vbus_pin_a: usb1_vbus_pin@0 { - pins = "PH27"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_a>; gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31-colombus.dts b/arch/arm/dts/sun6i-a31-colombus.dts index 939c497a6f..93a15eaaa8 100644 --- a/arch/arm/dts/sun6i-a31-colombus.dts +++ b/arch/arm/dts/sun6i-a31-colombus.dts @@ -60,13 +60,11 @@ stdout-path = "serial0:115200n8"; }; - i2c_lcd: i2c@0 { + i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_lcd_pins>; - gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */ - <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */ + sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */ + scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */ i2c-gpio,delay-us = <5>; }; }; @@ -77,31 +75,21 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; phy-mode = "rgmii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "fail"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; mma8452: mma8452@1d { @@ -112,48 +100,27 @@ }; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - -&pio { - mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - - usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - pins = "PH24"; - function = "gpio_out"; - }; - - i2c_lcd_pins: i2c_lcd_pin@0 { - pins = "PA23", "PA24"; - function = "gpio_out"; - bias-pull-up; - }; -}; - ®_usb2_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_colombus>; gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts index 2c14358035..486cec6f71 100644 --- a/arch/arm/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/dts/sun6i-a31-hummingbird.dts @@ -86,31 +86,23 @@ vga-dac { compatible = "dumb-vga-dac"; vdd-supply = <®_vga_3v3>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - vga_dac_in: endpoint@0 { - reg = <0>; + vga_dac_in: endpoint { remote-endpoint = <&tcon0_out_vga>; }; }; port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - vga_dac_out: endpoint@0 { - reg = <0>; + vga_dac_out: endpoint { remote-endpoint = <&vga_con_in>; }; }; @@ -160,17 +152,10 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>; - phy = <&phy1>; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; phy-mode = "rgmii-id"; - snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -184,21 +169,15 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; /* pull-ups and devices require AXP221 DLDO3 */ status = "failed"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; pcf8563: rtc@51 { @@ -209,27 +188,27 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + }; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&mmc0_pins_a { - /* external pull-ups missing for some pins */ - bias-pull-up; -}; - &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -241,31 +220,13 @@ status = "okay"; }; -&pio { - gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { - pins = "PA21"; - function = "gpio_out"; - }; - - mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - - wifi_reset_pin_hummingbird: wifi_reset_pin@0 { - pins = "PG10"; - function = "gpio_out"; - }; -}; - &p2wi { status = "okay"; axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; }; @@ -354,7 +315,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; @@ -368,8 +329,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ - usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/dts/sun6i-a31-i7.dts b/arch/arm/dts/sun6i-a31-i7.dts index d659be9dbc..744723d956 100644 --- a/arch/arm/dts/sun6i-a31-i7.dts +++ b/arch/arm/dts/sun6i-a31-i7.dts @@ -71,10 +71,8 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_i7>; - blue { + led { label = "i7:blue:usr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; @@ -118,14 +116,10 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; + pinctrl-0 = <&gmac_mii_pins>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -140,48 +134,31 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; -&pio { - led_pins_i7: led_pins@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_i7: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_i7: usb1_vbus_pin@0 { - pins = "PC27"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_i7>; gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_pins_a>; - spdif-out = "okay"; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; @@ -191,7 +168,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31-m9.dts b/arch/arm/dts/sun6i-a31-m9.dts index 9698f6d38d..e4f3415e61 100644 --- a/arch/arm/dts/sun6i-a31-m9.dts +++ b/arch/arm/dts/sun6i-a31-m9.dts @@ -60,10 +60,8 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m9>; - blue { + led { label = "m9:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -85,26 +83,26 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; + pinctrl-0 = <&gmac_mii_pins>; + phy-handle = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ @@ -117,31 +115,13 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; #include "axp22x.dtsi" -&pio { - led_pins_m9: led_pins@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_m9: usb1_vbus_pin@0 { - pins = "PC27"; - function = "gpio_out"; - }; -}; - ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -215,15 +195,13 @@ }; ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_m9>; gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts index bb14b171b1..7bd4bdd66a 100644 --- a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts @@ -60,10 +60,8 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m9>; - blue { + led { label = "a1000g:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -85,26 +83,26 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; + pinctrl-0 = <&gmac_mii_pins>; + phy-handle = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ @@ -117,31 +115,13 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; #include "axp22x.dtsi" -&pio { - led_pins_m9: led_pins@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - pins = "PH22"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_m9: usb1_vbus_pin@0 { - pins = "PC27"; - function = "gpio_out"; - }; -}; - ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -215,15 +195,13 @@ }; ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_m9>; gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31-mixtile-loftq.dts b/arch/arm/dts/sun6i-a31-mixtile-loftq.dts index 32ab9751c6..dde9bdf2f9 100644 --- a/arch/arm/dts/sun6i-a31-mixtile-loftq.dts +++ b/arch/arm/dts/sun6i-a31-mixtile-loftq.dts @@ -31,11 +31,13 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; +}; +&mdio { phy1: ethernet-phy@1 { reg = <1>; }; @@ -51,6 +53,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi index c72992556a..d7d920e9e4 100644 --- a/arch/arm/dts/sun6i-a31.dtsi +++ b/arch/arm/dts/sun6i-a31.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include #include @@ -52,6 +50,8 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; aliases { ethernet0 = &gmac; @@ -62,7 +62,7 @@ #size-cells = <1>; ranges; - simplefb_hdmi: framebuffer@0 { + simplefb_hdmi: framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -73,7 +73,7 @@ status = "disabled"; }; - simplefb_lcd: framebuffer@1 { + simplefb_lcd: framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -105,37 +105,63 @@ reg = <0>; clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ - operating-points = < + operating-points = /* kHz uV */ - 1008000 1200000 - 864000 1200000 - 720000 1100000 - 480000 1000000 - >; + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = + /* kHz uV */ + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; + #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = + /* kHz uV */ + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = + /* kHz uV */ + <1008000 1200000>, + <864000 1200000>, + <720000 1100000>, + <480000 1000000>; + #cooling-cells = <2>; }; }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; @@ -144,7 +170,10 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -166,12 +195,8 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - pmu { - compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + compatible = "arm,cortex-a7-pmu"; interrupts = , , , @@ -183,17 +208,20 @@ #size-cells = <1>; ranges; - osc24M: osc24M { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; + clock-output-names = "osc24M"; }; - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext_osc32k"; }; /* @@ -205,14 +233,14 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: clk@1 { + mii_phy_tx_clk: clk-mii-phy-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: clk@2 { + gmac_int_tx_clk: clk-gmac-int-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -234,7 +262,7 @@ status = "disabled"; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -253,15 +281,21 @@ compatible = "allwinner,sun6i-a31-tcon"; reg = <0x01c0c000 0x1000>; interrupts = ; - resets = <&ccu RST_AHB1_LCD0>; - reset-names = "lcd"; + dmas = <&dma 11>; + resets = <&ccu RST_AHB1_LCD0>, + <&ccu RST_AHB1_LVDS>; + reset-names = "lcd", + "lvds"; clocks = <&ccu CLK_AHB1_LCD0>, <&ccu CLK_LCD0_CH0>, - <&ccu CLK_LCD0_CH1>; + <&ccu CLK_LCD0_CH1>, + <&ccu 15>; clock-names = "ahb", "tcon-ch0", - "tcon-ch1"; + "tcon-ch1", + "lvds-alt"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -301,15 +335,20 @@ compatible = "allwinner,sun6i-a31-tcon"; reg = <0x01c0d000 0x1000>; interrupts = ; - resets = <&ccu RST_AHB1_LCD1>; - reset-names = "lcd"; + dmas = <&dma 12>; + resets = <&ccu RST_AHB1_LCD1>, + <&ccu RST_AHB1_LVDS>; + reset-names = "lcd", "lvds"; clocks = <&ccu CLK_AHB1_LCD1>, <&ccu CLK_LCD1_CH0>, - <&ccu CLK_LCD1_CH1>; + <&ccu CLK_LCD1_CH1>, + <&ccu 15>; clock-names = "ahb", "tcon-ch0", - "tcon-ch1"; + "tcon-ch1", + "lvds-alt"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -359,6 +398,8 @@ resets = <&ccu RST_AHB1_MMC0>; reset-names = "ahb"; interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -378,6 +419,8 @@ resets = <&ccu RST_AHB1_MMC1>; reset-names = "ahb"; interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -431,7 +474,6 @@ <&ccu CLK_PLL_VIDEO1_2X>; clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; resets = <&ccu RST_AHB1_HDMI>; - reset-names = "ahb"; dma-names = "ddc-tx", "ddc-rx", "audio-tx"; dmas = <&dma 13>, <&dma 13>, <&dma 14>; status = "disabled"; @@ -457,8 +499,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -474,6 +514,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -557,7 +598,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun6i-a31-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -570,14 +611,14 @@ , , ; - clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; - gmac_pins_gmii_a: gmac_gmii@0 { + gmac_gmii_pins: gmac-gmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", @@ -593,7 +634,7 @@ drive-strength = <30>; }; - gmac_pins_mii_a: gmac_mii@0 { + gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", "PA12", "PA13", "PA14", "PA19", @@ -602,7 +643,7 @@ function = "gmac"; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA19", @@ -615,22 +656,22 @@ drive-strength = <40>; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PH14", "PH15"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PH16", "PH17"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PH18", "PH19"; function = "i2c2"; }; - lcd0_rgb888_pins: lcd0_rgb888 { + lcd0_rgb888_pins: lcd0-rgb888-pins { pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", @@ -641,7 +682,7 @@ function = "lcd0"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -649,7 +690,7 @@ bias-pull-up; }; - mmc1_pins_a: mmc1@0 { + mmc1_pins: mmc1-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -657,7 +698,7 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_4bit_pins: mmc2-4bit-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; function = "mmc2"; @@ -665,7 +706,7 @@ bias-pull-up; }; - mmc2_8bit_emmc_pins: mmc2@1 { + mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", @@ -675,7 +716,7 @@ bias-pull-up; }; - mmc3_8bit_emmc_pins: mmc3@1 { + mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", @@ -685,12 +726,12 @@ bias-pull-up; }; - spdif_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PH28"; function = "spdif"; }; - uart0_pins_a: uart0@0 { + uart0_ph_pins: uart0-ph-pins { pins = "PH20", "PH21"; function = "uart0"; }; @@ -703,13 +744,16 @@ , , , - ; + , + ; clocks = <&osc24M>; }; wdt1: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; + interrupts = ; + clocks = <&osc24M>; }; spdif: spdif@1c21000 { @@ -849,6 +893,8 @@ interrupts = ; clocks = <&ccu CLK_APB2_I2C0>; resets = <&ccu RST_APB2_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -860,6 +906,8 @@ interrupts = ; clocks = <&ccu CLK_APB2_I2C1>; resets = <&ccu RST_APB2_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -871,6 +919,8 @@ interrupts = ; clocks = <&ccu CLK_APB2_I2C2>; resets = <&ccu RST_APB2_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -900,8 +950,12 @@ snps,fixed-burst; snps,force_sf_dma_mode; status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; crypto: crypto-engine@1c15000 { @@ -950,6 +1004,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi1: spi@1c69000 { @@ -962,6 +1018,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi2: spi@1c6a000 { @@ -974,6 +1032,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi3: spi@1c6b000 { @@ -986,10 +1046,12 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -1073,9 +1135,6 @@ "ram"; resets = <&ccu RST_AHB1_BE1>; - assigned-clocks = <&ccu CLK_BE1>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1119,9 +1178,6 @@ "ram"; resets = <&ccu RST_AHB1_DRC1>; - assigned-clocks = <&ccu CLK_IEP_DRC1>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1165,9 +1221,6 @@ "ram"; resets = <&ccu RST_AHB1_BE0>; - assigned-clocks = <&ccu CLK_BE0>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1189,12 +1242,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -1211,20 +1261,14 @@ "ram"; resets = <&ccu RST_AHB1_DRC0>; - assigned-clocks = <&ccu CLK_IEP_DRC0>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; @@ -1248,13 +1292,16 @@ }; rtc: rtc@1f00000 { + #clock-cells = <1>; compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = , ; + clocks = <&osc32k>; + clock-output-names = "osc32k"; }; - nmi_intc: interrupt-controller@1f00c00 { + r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; @@ -1269,7 +1316,7 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, + clocks = <&rtc 0>, <&osc24M>, <&ccu CLK_PLL_PERIPH>, <&ccu CLK_PLL_PERIPH>; clock-output-names = "ar100"; @@ -1304,7 +1351,7 @@ ir_clk: ir_clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; - clocks = <&osc32k>, <&osc24M>; + clocks = <&rtc 0>, <&osc24M>; clock-output-names = "ir"; }; @@ -1320,7 +1367,7 @@ }; ir: ir@1f02000 { - compatible = "allwinner,sun5i-a13-ir"; + compatible = "allwinner,sun6i-a31-ir"; clocks = <&apb0_gates 1>, <&ir_clk>; clock-names = "apb", "ir"; resets = <&apb0_rst 1>; @@ -1334,21 +1381,20 @@ reg = <0x01f02c00 0x400>; interrupts = , ; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; - ir_pins_a: ir@0 { + s_ir_rx_pin: s-ir-rx-pin { pins = "PL4"; function = "s_ir"; }; - p2wi_pins: p2wi { + s_p2wi_pins: s-p2wi-pins { pins = "PL0", "PL1"; function = "s_p2wi"; }; @@ -1362,7 +1408,7 @@ clock-frequency = <100000>; resets = <&apb0_rst 3>; pinctrl-names = "default"; - pinctrl-0 = <&p2wi_pins>; + pinctrl-0 = <&s_p2wi_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts index 882a4d89fa..a2ef7846e2 100644 --- a/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts +++ b/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts @@ -53,7 +53,7 @@ vref-supply = <®_aldo3>; status = "okay"; - button@1000 { + button-1000 { label = "Home"; linux,code = ; channel = <0>; diff --git a/arch/arm/dts/sun6i-a31s-cs908.dts b/arch/arm/dts/sun6i-a31s-cs908.dts index 75e578159c..1d15e15011 100644 --- a/arch/arm/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/dts/sun6i-a31s-cs908.dts @@ -66,28 +66,31 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; + pinctrl-0 = <&gmac_mii_pins>; + phy-handle = <&phy1>; phy-mode = "mii"; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &ohci1 { status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31s-inet-q972.dts b/arch/arm/dts/sun6i-a31s-inet-q972.dts index e584e6b186..c5e2c55cdc 100644 --- a/arch/arm/dts/sun6i-a31s-inet-q972.dts +++ b/arch/arm/dts/sun6i-a31s-inet-q972.dts @@ -54,8 +54,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; ft5406ee8: touchscreen@38 { @@ -73,21 +71,21 @@ vref-supply = <®_aldo3>; status = "okay"; - button@200 { + button-200 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@900 { + button-900 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <900000>; }; - button@1200 { + button-1200 { label = "Back"; linux,code = ; channel = <0>; diff --git a/arch/arm/dts/sun6i-a31s-primo81.dts b/arch/arm/dts/sun6i-a31s-primo81.dts index 4cb9664cdb..66bc6ca77a 100644 --- a/arch/arm/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/dts/sun6i-a31s-primo81.dts @@ -90,19 +90,13 @@ &i2c0 { /* pull-ups and device VDDIO use AXP221 DLDO3 */ - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "failed"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; ctp@5d { - pinctrl-names = "default"; - pinctrl-0 = <>911_int_primo81>; compatible = "goodix,gt911"; reg = <0x5d>; interrupt-parent = <&pio>; @@ -112,8 +106,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; accelerometer@1c { @@ -123,7 +115,6 @@ reg = <0x1c>; interrupt-parent = <&pio>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */ - #io-channel-cells = <1>; }; }; @@ -131,14 +122,14 @@ vref-supply = <®_aldo3>; status = "okay"; - button@158 { + button-158 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <158730>; }; - button@349 { + button-349 { label = "Volume Down"; linux,code = ; channel = <0>; @@ -147,8 +138,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ @@ -156,22 +145,11 @@ }; &pio { - gt911_int_primo81: gt911_int_pin@0 { - pins = "PA3"; - function = "gpio_in"; - }; - - mma8452_int_primo81: mma8452_int_pin@0 { + mma8452_int_primo81: mma8452-int-pin { pins = "PA9"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_primo81: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; }; &p2wi { @@ -180,7 +158,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; }; @@ -281,7 +259,7 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; diff --git a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi index d7325bc4ee..7455c0db4a 100644 --- a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi @@ -78,7 +78,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -135,7 +135,7 @@ /* UART0 pads available on core board */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31s-sina31s.dts b/arch/arm/dts/sun6i-a31s-sina31s.dts index da0ccf5a2c..0af48e143b 100644 --- a/arch/arm/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/dts/sun6i-a31s-sina31s.dts @@ -66,8 +66,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pin_sina31s>; status { label = "sina31s:status:usr"; @@ -116,15 +114,11 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; + pinctrl-0 = <&gmac_mii_pins>; + phy-handle = <&phy1>; phy-mode = "mii"; phy-supply = <®_dldo1>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &hdmi { @@ -139,7 +133,7 @@ &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; @@ -147,14 +141,14 @@ vref-supply = <®_aldo3>; status = "okay"; - button@158 { + button-158 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <158730>; }; - button@349 { + button-349 { label = "Volume Down"; linux,code = ; channel = <0>; @@ -162,9 +156,13 @@ }; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ @@ -175,19 +173,6 @@ status = "okay"; }; -&pio { - led_pin_sina31s: led_pin@0 { - pins = "PH13"; - function = "gpio_out"; - }; - - mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { - pins = "PA4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -196,7 +181,7 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts index b8b79c0e9e..efb25b949f 100644 --- a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -58,20 +58,18 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bpi_m2>; - blue { + led-0 { label = "bpi-m2:blue:usr"; gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ }; - green { + led-1 { label = "bpi-m2:green:usr"; gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ }; - red { + led-2 { label = "bpi-m2:red:usr"; gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */ }; @@ -79,8 +77,6 @@ mmc2_pwrseq: mmc2_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ }; }; @@ -95,42 +91,38 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; - phy = <&phy1>; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_dldo1>; - snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; &ir { pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; + pinctrl-0 = <&s_ir_rx_pin>; status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */ + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + }; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &mmc2 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; + pinctrl-0 = <&mmc2_4bit_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; @@ -146,10 +138,6 @@ }; }; -&mmc2_pins_a { - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -160,38 +148,13 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; }; }; -&pio { - gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { - pins = "PA21"; - function = "gpio_out"; - }; - - led_pins_bpi_m2: led_pins@0 { - pins = "PG5", "PG10", "PG11"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { - pins = "PA4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - -&r_pio { - mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { - pins = "PL8"; - function = "gpio_out"; - }; -}; - #include "axp22x.dtsi" ®_aldo1 { @@ -291,10 +254,81 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; &usbphy { status = "okay"; }; + +&pio { + gpio-line-names = + /* PA */ + "ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "", + "", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1", + "ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK", + "ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC", + "EMDIO", "", "", "", "", + + /* PB */ + "CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37", + "CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", + + /* PC */ + "", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK", + "WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "USB-DRV", "", "", "", "", + + /* PD */ + "CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17", + "CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27", + "CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37", + "CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34", + "CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22", + "CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "", + + /* PE */ + "CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08", + "CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19", + "CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29", + "CN6-P31", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", + + /* PF */ + "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", + "SDC0-D2", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", + + /* PG */ + "CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07", + "LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15", + "LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23", + "CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "", + "", "", "", "", "", "", "", "", "", + + /* PH */ + "", "", "", "", "", "", "", "", "", "CN7-P07", + "CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16", + "CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03", + "CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32", + "CN6-P26", "CN6-P18", "", "", "", ""; +}; + +&r_pio { + gpio-line-names = + /* PL */ + "PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX", + "WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE", + "WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + + /* PM */ + "CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", ""; +}; diff --git a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index aab6c1720e..cadc45255d 100644 --- a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -62,14 +62,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -89,34 +85,20 @@ status = "okay"; }; -&pio { - mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &p2wi { status = "okay"; axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -189,7 +171,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/dts/sun6i-reference-design-tablet.dtsi index 4e72e4f3ef..6bf3fbdd73 100644 --- a/arch/arm/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/dts/sun6i-reference-design-tablet.dtsi @@ -66,34 +66,20 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -&pio { - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - pins = "PA8"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PA15"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &p2wi { status = "okay"; axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; drivevbus-supply = <®_vcc5v0>; x-powers,drive-vbus-en; @@ -179,9 +165,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index 44f3cad3de..a42fac676b 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include #include @@ -51,13 +49,15 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; chosen { #address-cells = <1>; #size-cells = <1>; ranges; - simplefb_lcd: framebuffer@0 { + simplefb_lcd: framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -68,6 +68,12 @@ }; }; + de: display-engine { + /* compatible gets set in SoC specific dtsi file */ + allwinner,pipelines = <&fe0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = , @@ -118,12 +124,34 @@ }; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + system-control@1c00000 { + compatible = "allwinner,sun8i-a23-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0x80000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-a23-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; @@ -133,6 +161,60 @@ #dma-cells = <1>; }; + nfc: nand-controller@1c03000 { + compatible = "allwinner,sun8i-a23-nand-controller"; + reg = <0x01c03000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + dmas = <&dma 5>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + tcon0: lcd-controller@1c0c000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c0c000 0x1000>; + interrupts = ; + dmas = <&dma 12>; + clocks = <&ccu CLK_BUS_LCD>, + <&ccu CLK_LCD_CH0>, + <&ccu 13>; + clock-names = "ahb", + "tcon-ch0", + "lvds-alt"; + clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; + resets = <&ccu RST_BUS_LCD>, + <&ccu RST_BUS_LVDS>; + reset-names = "lcd", + "lvds"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + reg = <0>; + + tcon0_in_drc0: endpoint { + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + reg = <1>; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -147,6 +229,8 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -190,21 +274,6 @@ #size-cells = <0>; }; - nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_NAND>; - reset-names = "ahb"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - usb_otg: usb@1c19000 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c19000 0x0400>; @@ -215,6 +284,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -276,22 +346,30 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - uart0_pins_a: uart0@0 { - pins = "PF2", "PF4"; - function = "uart0"; + i2c0_pins: i2c0-pins { + pins = "PH2", "PH3"; + function = "i2c0"; }; - uart1_pins_a: uart1@0 { - pins = "PG6", "PG7"; - function = "uart1"; + i2c1_pins: i2c1-pins { + pins = "PH4", "PH5"; + function = "i2c1"; }; - uart1_pins_cts_rts_a: uart1-cts-rts@0 { - pins = "PG8", "PG9"; - function = "uart1"; + i2c2_pins: i2c2-pins { + pins = "PE12", "PE13"; + function = "i2c2"; }; - mmc0_pins_a: mmc0@0 { + lcd_rgb666_pins: lcd-rgb666-pins { + pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; + }; + + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -299,7 +377,7 @@ bias-pull-up; }; - mmc1_pins_a: mmc1@0 { + mmc1_pg_pins: mmc1-pg-pins { pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; function = "mmc1"; @@ -307,7 +385,7 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", @@ -324,61 +402,53 @@ function = "nand0"; }; - nand_pins_cs0: nand-pins-cs0 { + nand_cs0_pin: nand-cs0-pin { pins = "PC4"; function = "nand0"; bias-pull-up; }; - nand_pins_cs1: nand-pins-cs1 { + nand_cs1_pin: nand-cs1-pin { pins = "PC3"; function = "nand0"; bias-pull-up; }; - nand_pins_rb0: nand-pins-rb0 { + nand_rb0_pin: nand-rb0-pin { pins = "PC6"; function = "nand0"; bias-pull-up; }; - nand_pins_rb1: nand-pins-rb1 { + nand_rb1_pin: nand-rb1-pin { pins = "PC7"; function = "nand0"; bias-pull-up; }; - pwm0_pins: pwm0 { + pwm0_pin: pwm0-pin { pins = "PH0"; function = "pwm0"; }; - i2c0_pins_a: i2c0@0 { - pins = "PH2", "PH3"; - function = "i2c0"; - }; - - i2c1_pins_a: i2c1@0 { - pins = "PH4", "PH5"; - function = "i2c1"; + uart0_pf_pins: uart0-pf-pins { + pins = "PF2", "PF4"; + function = "uart0"; }; - i2c2_pins_a: i2c2@0 { - pins = "PE12", "PE13"; - function = "i2c2"; + uart1_pg_pins: uart1-pg-pins { + pins = "PG6", "PG7"; + function = "uart1"; }; - lcd_rgb666_pins: lcd-rgb666@0 { - pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", - "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", - "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", - "PD24", "PD25", "PD26", "PD27"; - function = "lcd0"; + uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins { + pins = "PG8", "PG9"; + function = "uart1"; }; }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = , ; @@ -389,6 +459,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = ; + clocks = <&osc24M>; }; pwm: pwm@1c21400 { @@ -477,6 +548,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -488,6 +561,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -499,6 +574,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -532,7 +609,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -542,17 +619,104 @@ interrupts = ; }; + fe0: display-frontend@1e00000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e00000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_FE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + reg = <1>; + + fe0_out_be0: endpoint { + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e60000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_BE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + reg = <0>; + + be0_in_fe0: endpoint { + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + reg = <1>; + + be0_out_drc0: endpoint { + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@1e70000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e70000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, + <&ccu CLK_DRAM_DRC>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_DRC>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + reg = <0>; + + drc0_in_be0: endpoint { + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + reg = <1>; + + drc0_out_tcon0: endpoint { + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + rtc: rtc@1f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; + compatible = "allwinner,sun8i-a23-rtc"; + reg = <0x01f00000 0x400>; interrupts = , ; - clock-output-names = "osc32k"; + clock-output-names = "osc32k", "osc32k-out"; clocks = <&ext_osc32k>; #clock-cells = <1>; }; - nmi_intc: interrupt-controller@1f00c00 { + r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; @@ -624,6 +788,20 @@ status = "disabled"; }; + r_i2c: i2c@1f02400 { + compatible = "allwinner,sun8i-a23-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01f02400 0x400>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + clocks = <&apb0_gates 6>; + resets = <&apb0_rst 6>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -634,18 +812,22 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <0>; #gpio-cells = <3>; - r_rsb_pins: r_rsb { + r_i2c_pins: r-i2c-pins { + pins = "PL0", "PL1"; + function = "s_i2c"; + bias-pull-up; + }; + + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; drive-strength = <20>; bias-pull-up; }; - r_uart_pins_a: r_uart@0 { + r_uart_pins_a: r-uart-pins { pins = "PL2", "PL3"; function = "s_uart"; }; diff --git a/arch/arm/dts/sun8i-a23-evb.dts b/arch/arm/dts/sun8i-a23-evb.dts index 8a93697df3..53fb1be040 100644 --- a/arch/arm/dts/sun8i-a23-evb.dts +++ b/arch/arm/dts/sun8i-a23-evb.dts @@ -65,14 +65,10 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; @@ -80,21 +76,21 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@190 { + button-190 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <190000>; }; - button@390 { + button-390 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <390000>; }; - button@600 { + button-600 { label = "Home"; linux,code = ; channel = <0>; @@ -103,22 +99,12 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ status = "okay"; }; -&pio { - mmc0_cd_pin_evb: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - /* * The RX line has a non-populated resistance. In order to use it, you * need to solder R207 on the back of the board in order to close the diff --git a/arch/arm/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/dts/sun8i-a23-gt90h-v4.dts index e3c7a25ca3..bcbc9b0758 100644 --- a/arch/arm/dts/sun8i-a23-gt90h-v4.dts +++ b/arch/arm/dts/sun8i-a23-gt90h-v4.dts @@ -63,7 +63,7 @@ }; &lradc { - button@600 { + button-600 { label = "Back"; linux,code = ; channel = <0>; diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts new file mode 100644 index 0000000000..51097c77a1 --- /dev/null +++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -0,0 +1,73 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A23 Tablet"; + compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; +}; + +&codec { + allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + allwinner,audio-routing = + "Headphone", "HP", + "Headphone", "HPCOM", + "Speaker", "HP", + "MIC1", "Mic", + "MIC2", "Headset Mic", + "Mic", "MBIAS", + "Headset Mic", "HBIAS"; + status = "okay"; +}; + +&panel { + compatible = "bananapi,s070wv20-ct16"; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint { + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts new file mode 100644 index 0000000000..51097c77a1 --- /dev/null +++ b/arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts @@ -0,0 +1,73 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A23 Tablet"; + compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; +}; + +&codec { + allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + allwinner,audio-routing = + "Headphone", "HP", + "Headphone", "HPCOM", + "Speaker", "HP", + "MIC1", "Mic", + "MIC2", "Headset Mic", + "Mic", "MBIAS", + "Headset Mic", "HBIAS"; + status = "okay"; +}; + +&panel { + compatible = "bananapi,s070wv20-ct16"; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint { + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts index 649e313396..d5f6aebd72 100644 --- a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -54,8 +54,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_mid2407>; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ post-power-on-delay-ms = <200>; @@ -71,7 +69,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -85,17 +83,6 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - -&r_pio { - wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 { - pins = "PL6"; - function = "gpio_out"; - }; -}; - &touchscreen { reg = <0x40>; compatible = "silead,gsl1680"; diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts index 6b3bcae089..9f9232a2fe 100644 --- a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -54,8 +54,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_mid2809>; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ /* The esp8089 needs 200 ms after driving wifi-en high */ post-power-on-delay-ms = <200>; @@ -64,7 +62,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -78,17 +76,6 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - -&r_pio { - wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 { - pins = "PL6"; - function = "gpio_out"; - }; -}; - &touchscreen { reg = <0x40>; compatible = "silead,gsl3670"; diff --git a/arch/arm/dts/sun8i-a23-q8-tablet.dts b/arch/arm/dts/sun8i-a23-q8-tablet.dts index b6958e8f2f..51097c77a1 100644 --- a/arch/arm/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/dts/sun8i-a23-q8-tablet.dts @@ -61,3 +61,13 @@ "Headset Mic", "HBIAS"; status = "okay"; }; + +&panel { + compatible = "bananapi,s070wv20-ct16"; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint { + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/dts/sun8i-a23.dtsi b/arch/arm/dts/sun8i-a23.dtsi index 58e6585b50..a5e884a8b2 100644 --- a/arch/arm/dts/sun8i-a23.dtsi +++ b/arch/arm/dts/sun8i-a23.dtsi @@ -45,11 +45,7 @@ #include "sun8i-a23-a33.dtsi" / { - memory { - reg = <0x40000000 0x40000000>; - }; - - soc@1c00000 { + soc { codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-a23-codec"; @@ -66,10 +62,26 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a23-display-backend"; +}; + &ccu { compatible = "allwinner,sun8i-a23-ccu"; }; +&de { + compatible = "allwinner,sun8i-a23-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a23-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a23-display-frontend"; +}; + &pio { compatible = "allwinner,sun8i-a23-pinctrl"; interrupts = , @@ -77,6 +89,10 @@ ; }; +&tcon0 { + compatible = "allwinner,sun8i-a23-tcon"; +}; + &usb_otg { compatible = "allwinner,sun6i-a31-musb"; }; diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts similarity index 81% rename from arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts rename to arch/arm/dts/sun8i-a33-et-q8-v1.6.dts index e5590208ed..9c5750c256 100644 --- a/arch/arm/dts/sun8i-r16-nintendo-nes-classic-edition.dts +++ b/arch/arm/dts/sun8i-a33-et-q8-v1.6.dts @@ -1,5 +1,5 @@ /* - * Copyright (c) 2016 FUKAUMI Naoki + * Copyright 2015 Hans de Goede * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -42,34 +42,16 @@ /dts-v1/; #include "sun8i-a33.dtsi" +#include "sun8i-q8-common.dtsi" / { - model = "Nintendo NES Classic Edition"; - compatible = "nintendo,nes-classic-edition", "allwinner,sun8i-a33"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; + model = "Q8 A33 Tablet"; + compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&nfc { - status = "okay"; - - nand@0 { - #address-cells = <1>; - #size-cells = <1>; +&tcon0_out { + tcon0_out_lcd: endpoint@0 { reg = <0>; - allwinner,rb = <0>; - nand-ecc-mode = "hw"; + remote-endpoint = <&panel_input>; }; }; diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts index f71159987c..2dfdd0a315 100644 --- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts @@ -69,7 +69,7 @@ }; &lradc { - button@600 { + button-600 { label = "Back"; linux,code = ; channel = <0>; @@ -79,7 +79,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; bus-width = <4>; non-removable; diff --git a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts index 3e05959104..065cb620aa 100644 --- a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts @@ -63,20 +63,16 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pin_d978>; - home { + led { label = "d978:blue:home"; gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ }; }; }; -&mmc1_pins_a { - bias-pull-up; -}; - &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; bus-width = <4>; non-removable; @@ -88,7 +84,7 @@ }; &r_pio { - led_pin_d978: led_pin_d978@0 { + led_pin_d978: led-pin { pins = "PL5"; function = "gpio_out"; drive-strength = <20>; @@ -101,7 +97,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, - <&uart1_pins_cts_rts_a>; + pinctrl-0 = <&uart1_pg_pins>, + <&uart1_cts_rts_pg_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts new file mode 100644 index 0000000000..9c5750c256 --- /dev/null +++ b/arch/arm/dts/sun8i-a33-ippo-q8h-v1.2.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A33 Tablet"; + compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/dts/sun8i-a33-olinuxino.dts b/arch/arm/dts/sun8i-a33-olinuxino.dts index a1a1eb64ca..8538514c85 100644 --- a/arch/arm/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/dts/sun8i-a33-olinuxino.dts @@ -62,7 +62,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "a33-olinuxino:green:usr"; gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; }; @@ -82,8 +82,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -100,7 +98,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; @@ -196,8 +194,8 @@ "Headphone", "Headphone Jack"; /* Board level routing. First 2 routes copied from SoC level */ simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "HP", "HPCOM", "Headphone Jack", "HP", "MIC1", "Microphone Jack", @@ -207,7 +205,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a33-q8-tablet.dts b/arch/arm/dts/sun8i-a33-q8-tablet.dts index b0bc2360f8..9c5750c256 100644 --- a/arch/arm/dts/sun8i-a33-q8-tablet.dts +++ b/arch/arm/dts/sun8i-a33-q8-tablet.dts @@ -48,3 +48,10 @@ model = "Q8 A33 Tablet"; compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; }; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts index 541acb4d2b..d54a067fc7 100644 --- a/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/dts/sun8i-a33-sinlinx-sina33.dts @@ -63,16 +63,10 @@ panel { compatible = "netron-dy,e231732"; - #address-cells = <1>; - #size-cells = <0>; + power-supply = <®_vcc3v3>; - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_panel>; }; }; @@ -117,21 +111,21 @@ vref-supply = <®_dcdc1>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <191011>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = ; channel = <0>; voltage = <391304>; }; - button@600 { + button-600 { label = "Home"; linux,code = ; channel = <0>; @@ -140,8 +134,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -161,29 +153,19 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ drive-strength = <40>; - /* eMMC is missing pull-ups */ - bias-pull-up; }; &ohci0 { status = "okay"; }; -&pio { - mmc0_cd_pin_sina33: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; }; @@ -278,7 +260,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi index 8d278ee001..b3d1bdfb51 100644 --- a/arch/arm/dts/sun8i-a33.dtsi +++ b/arch/arm/dts/sun8i-a33.dtsi @@ -46,7 +46,7 @@ #include / { - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -131,37 +131,40 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; - de: display-engine { - compatible = "allwinner,sun8i-a33-display-engine"; - allwinner,pipelines = <&fe0>; - status = "disabled"; - }; - iio-hwmon { compatible = "iio-hwmon"; io-channels = <&ths>; }; - mali_opp_table: gpu-opp-table { + mali_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-144000000 { @@ -177,21 +180,17 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; - }; - sound: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sun8i-a33-audio"; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&link_codec>; simple-audio-card,bitclock-master = <&link_codec>; - simple-audio-card,mclk-fs = <512>; + simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right"; + "Left DAC", "DACL", + "Right DAC", "DACR"; status = "disabled"; simple-audio-card,cpu { @@ -199,54 +198,24 @@ }; link_codec: simple-audio-card,codec { - sound-dai = <&codec>; + sound-dai = <&codec 0>; }; }; - soc@1c00000 { - tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun8i-a33-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_LCD>, - <&ccu CLK_LCD_CH0>; - clock-names = "ahb", - "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; - resets = <&ccu RST_BUS_LCD>; - reset-names = "lcd"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_dsi: endpoint@1 { - reg = <1>; - remote-endpoint = <&dsi_in_tcon0>; - }; - }; - }; + soc { + video-codec@1c0e000 { + compatible = "allwinner,sun8i-a33-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = ; + allwinner,sram = <&ve_sram 1>; }; crypto: crypto-engine@1c15000 { - compatible = "allwinner,sun4i-a10-crypto"; + compatible = "allwinner,sun8i-a33-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; @@ -269,7 +238,7 @@ }; codec: codec@1c22e00 { - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; compatible = "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x400>; interrupts = ; @@ -296,19 +265,12 @@ phys = <&dphy>; phy-names = "dphy"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - dsi_in_tcon0: endpoint { - remote-endpoint = <&tcon0_out_dsi>; - }; + port { + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; }; }; }; @@ -323,119 +285,10 @@ status = "disabled"; #phy-cells = <0>; }; - - fe0: display-frontend@1e00000 { - compatible = "allwinner,sun8i-a33-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = ; - clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, - <&ccu CLK_DRAM_DE_FE>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_BUS_DE_FE>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@1e60000 { - compatible = "allwinner,sun8i-a33-display-backend"; - reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; - reg-names = "be", "sat"; - interrupts = ; - clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; - clock-names = "ahb", "mod", - "ram", "sat"; - resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; - reset-names = "be", "sat"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_in_be0>; - }; - }; - }; - }; - - drc0: drc@1e70000 { - compatible = "allwinner,sun8i-a33-drc"; - reg = <0x01e70000 0x10000>; - interrupts = ; - clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, - <&ccu CLK_DRAM_DRC>; - clock-names = "ahb", "mod", "ram"; - resets = <&ccu RST_BUS_DRC>; - - assigned-clocks = <&ccu CLK_DRC>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - drc0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_drc0>; - }; - }; - - drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - drc0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_drc0>; - }; - }; - }; - }; }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; @@ -444,11 +297,17 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map2 { @@ -502,10 +361,35 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a33-display-backend"; + /* A33 has an extra "SAT" module packed inside the display backend */ + reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; + reg-names = "be", "sat"; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; + clock-names = "ahb", "mod", + "ram", "sat"; + resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; + reset-names = "be", "sat"; +}; + &ccu { compatible = "allwinner,sun8i-a33-ccu"; }; +&de { + compatible = "allwinner,sun8i-a33-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a33-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a33-display-frontend"; +}; + &mali { operating-points-v2 = <&mali_opp_table>; }; @@ -515,13 +399,27 @@ interrupts = , ; - uart0_pins_b: uart0@1 { + uart0_pb_pins: uart0-pb-pins { pins = "PB0", "PB1"; function = "uart0"; }; }; +&tcon0 { + compatible = "allwinner,sun8i-a33-tcon"; +}; + +&tcon0_out { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + }; +}; + &usb_otg { compatible = "allwinner,sun8i-a33-musb"; }; diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi index c676940a96..3d9a1524e1 100644 --- a/arch/arm/dts/sun8i-q8-common.dtsi +++ b/arch/arm/dts/sun8i-q8-common.dtsi @@ -49,6 +49,19 @@ ethernet0 = &sdio_wifi; }; + panel: panel { + /* Tablet dts should provide panel compatible */ + backlight = <&backlight>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_dc1sw>; + + port { + panel_input: endpoint { + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; /* @@ -64,13 +77,17 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_dldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -82,18 +99,20 @@ }; }; -&mmc1_pins_a { - bias-pull-up; -}; - &r_pio { - wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { + wifi_pwrseq_pin_q8: wifi-pwrseq-pins { pins = "PL6", "PL7", "PL11"; function = "gpio_in"; bias-pull-up; }; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + &usbphy { usb1_vbus-supply = <®_dldo1>; }; diff --git a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts index 0dbdb29a8f..293016d081 100644 --- a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts @@ -64,17 +64,17 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bpi-m2m:blue:usr"; gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; }; - green { + led-1 { label = "bpi-m2m:green:usr"; gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; }; - red { + led-2 { label = "bpi-m2m:red:power"; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; default-state = "on"; @@ -91,6 +91,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -103,13 +105,13 @@ }; &cpu0_opp_table { - opp@1104000000 { + opp-1104000000 { opp-hz = /bits/ 64 <1104000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1320000>; clock-latency-ns = <244144>; /* 8 32k periods */ @@ -124,30 +126,7 @@ status = "okay"; }; -/* This is the i2c bus exposed on the DSI connector for the touch panel */ -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "disabled"; -}; - -/* This is the i2c bus exposed on the GPIO header */ -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "disabled"; -}; - -/* This is the i2c bus exposed on the CSI connector to control the sensor */ -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "disabled"; -}; - &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ @@ -156,7 +135,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -184,7 +163,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; @@ -292,14 +271,26 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>, <&uart1_pins_cts_rts_a>; + pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo1>; + vddio-supply = <®_aldo3>; + device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + }; }; &usb_otg { diff --git a/arch/arm/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/dts/sun8i-r16-nintendo-nes-classic.dts new file mode 100644 index 0000000000..246dec5846 --- /dev/null +++ b/arch/arm/dts/sun8i-r16-nintendo-nes-classic.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* Copyright (c) 2016 FUKAUMI Naoki */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +/ { + model = "Nintendo NES Classic Edition"; + compatible = "nintendo,nes-classic", "allwinner,sun8i-r16", + "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + /* + * UART0 is available on two ports: PB and PF, both are accessible. + * PF can also be used for the SD card so PB is preferred. + */ + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pf_pins>; + status = "okay"; +}; + +&nfc { + status = "okay"; + + /* 2Gb Macronix MX30LF2G18AC (3V) */ + nand@0 { + reg = <0>; + allwinner,rb = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <16>; + nand-ecc-step-size = <1024>; + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + /* VBUS is always on because it is wired to the power supply */ + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/dts/sun8i-r16-nintendo-super-nes-classic.dts new file mode 100644 index 0000000000..80761d7904 --- /dev/null +++ b/arch/arm/dts/sun8i-r16-nintendo-super-nes-classic.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* Copyright (c) 2018 Miquèl RAYNAL */ + +/dts-v1/; +#include "sun8i-r16-nintendo-nes-classic.dts" + +/ { + model = "Nintendo SuperNES Classic Edition"; + compatible = "nintendo,super-nes-classic", "nintendo,nes-classic", + "allwinner,sun8i-r16", "allwinner,sun8i-a33"; +}; diff --git a/arch/arm/dts/sun8i-r16-parrot.dts b/arch/arm/dts/sun8i-r16-parrot.dts index 472c03b7ae..2be1b76fe2 100644 --- a/arch/arm/dts/sun8i-r16-parrot.dts +++ b/arch/arm/dts/sun8i-r16-parrot.dts @@ -63,17 +63,15 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_parrot>; - led1 { + led-1 { label = "parrot:led1:usr"; - gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ + gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ }; - led2 { + led-2 { label = "parrot:led2:usr"; - gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ }; }; @@ -97,8 +95,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; /* @@ -111,14 +107,14 @@ vref-supply = <®_aldo3>; status = "okay"; - button@0 { + button-190 { label = "V+"; linux,code = ; channel = <0>; voltage = <190000>; }; - button@1 { + button-390 { label = "V-"; linux,code = ; channel = <0>; @@ -128,8 +124,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>; vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */ bus-width = <4>; @@ -138,7 +132,7 @@ &mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>; + pinctrl-0 = <&mmc1_pg_pins>; vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -158,51 +152,19 @@ &mmc2_8bit_pins { drive-strength = <40>; - bias-pull-up; }; &ohci0 { status = "okay"; }; -&pio { - mmc0_cd_pin_parrot: mmc0_cd_pin@0 { - pins = "PD14"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_parrot: led_pins@0 { - pins = "PE16", "PE17"; - function = "gpio_out"; - }; - - usb0_id_det: usb0_id_detect_pin@0 { - pins = "PD10"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_parrot: usb1_vbus_pin@0 { - pins = "PD12"; - function = "gpio_out"; - }; -}; - -&r_pio { - wifi_reset_pin_parrot: wifi_reset_pin@0 { - pins = "PL6"; - function = "gpio_out"; - }; -}; - &r_rsb { status = "okay"; axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; drivevbus-supply = <®_vcc5v0>; x-powers,drive-vbus-en; @@ -319,8 +281,6 @@ }; ®_usb1_vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_parrot>; gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */ status = "okay"; }; @@ -331,7 +291,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_b>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; @@ -346,10 +306,8 @@ &usbphy { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_det>; usb0_vbus-supply = <®_drivevbus>; - usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */ + usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_usb1_vbus>; }; diff --git a/arch/arm/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/dts/sun8i-reference-design-tablet.dtsi index 880096c7e2..797d61cff1 100644 --- a/arch/arm/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/dts/sun8i-reference-design-tablet.dtsi @@ -54,6 +54,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + power-supply = <®_dc1sw>; }; chosen { @@ -69,11 +70,10 @@ */ clock-frequency = <400000>; - touchscreen: touchscreen@0 { + touchscreen: touchscreen@40 { + reg = <0x40>; interrupt-parent = <&pio>; interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin>; power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ /* Tablet dts must provide reg and compatible */ status = "disabled"; @@ -81,40 +81,19 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */ status = "okay"; }; -&pio { - mmc0_cd_pin: mmc0_cd_pin@0 { - pins = "PB4"; - function = "gpio_in"; - bias-pull-up; - }; - - ts_power_pin: ts_power_pin@0 { - pins = "PH1"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH8"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; drivevbus-supply = <®_vcc5v0>; @@ -238,9 +217,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; diff --git a/arch/arm/dts/sunxi-common-regulators.dtsi b/arch/arm/dts/sunxi-common-regulators.dtsi index f1953b0c50..d8e5826fb3 100644 --- a/arch/arm/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/dts/sunxi-common-regulators.dtsi @@ -43,43 +43,10 @@ */ #include -#include - -&pio { - ahci_pwr_pin_a: ahci_pwr_pin@0 { - allwinner,pins = "PB8"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB9"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; / { reg_ahci_5v: ahci-5v { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&ahci_pwr_pin_a>; regulator-name = "ahci-5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -91,8 +58,6 @@ reg_usb0_vbus: usb0-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_vbus_pin_a>; regulator-name = "usb0-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -103,8 +68,6 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_a>; regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -116,8 +79,6 @@ reg_usb2_vbus: usb2-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_a>; regulator-name = "usb2-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/dts/sunxi-reference-design-tablet.dtsi index b8241462fc..117198c52e 100644 --- a/arch/arm/dts/sunxi-reference-design-tablet.dtsi +++ b/arch/arm/dts/sunxi-reference-design-tablet.dtsi @@ -42,18 +42,17 @@ #include #include -#include #include "sunxi-common-regulators.dtsi" &i2c0 { pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; + pinctrl-0 = <&i2c0_pins>; status = "okay"; }; &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -61,14 +60,14 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@200 { + button-200 { label = "Volume Up"; linux,code = ; channel = <0>; voltage = <200000>; }; - button@400 { + button-400 { label = "Volume Down"; linux,code = ; channel = <0>; @@ -78,6 +77,6 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 1f43b25324..5fc9b29a3e 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -911,7 +911,7 @@ config VIDEO_LCD_PANEL_I2C config VIDEO_LCD_PANEL_I2C_NAME string "LCD panel i2c interface node name" depends on VIDEO_LCD_PANEL_I2C - default "i2c@0" + default "i2c" ---help--- Set the device tree node name for the LCD i2c interface. diff --git a/configs/Nintendo_NES_Classic_Edition_defconfig b/configs/Nintendo_NES_Classic_Edition_defconfig index 72e9725c9a..b66023418a 100644 --- a/configs/Nintendo_NES_Classic_Edition_defconfig +++ b/configs/Nintendo_NES_Classic_Edition_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-nintendo-nes-classic-edition" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-nintendo-nes-classic" CONFIG_SPL=y CONFIG_MACH_SUN8I_A33=y CONFIG_DRAM_CLK=600 From patchwork Wed Apr 27 20:31:25 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623226 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=ROBNutd/; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=EaSUpkm2; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVnL47sXz9s5V for ; Thu, 28 Apr 2022 06:33:10 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 94D1F83C70; Wed, 27 Apr 2022 22:32:35 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="ROBNutd/"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="EaSUpkm2"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 1135583EAF; Wed, 27 Apr 2022 22:32:13 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id C934083E15 for ; Wed, 27 Apr 2022 22:31:59 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute3.internal (compute3.nyi.internal [10.202.2.43]) by mailout.nyi.internal (Postfix) with ESMTP id 0D38C5C015E; Wed, 27 Apr 2022 16:31:59 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute3.internal (MEProxy); Wed, 27 Apr 2022 16:31:59 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:date:date:from:from:in-reply-to :in-reply-to:message-id:mime-version:references:reply-to:sender :subject:subject:to:to; s=fm2; t=1651091519; x=1651177919; bh=TZ iIlAGLV0qFZtyi61sm8zQIrca+f2m0LuJ+RY+dnmk=; b=ROBNutd/euzAMupV4T kS2IB4EP74iK525pW7KDdb9Ylr8+hzyNy+vTtRwhtylYqvOLcQK55dfmpeasFII6 zV1cU3pYn3DEUyNzHJV5De8PdDq/H4hWv0+gCaD9hGz8MuF0XqjWecL0Ko1GgsGc 4bP7eUIJ87Swi8ljxoS9izhYhbbuXHBRPJvW2a6KFK4gFA05FibZwePLVttqCypQ Qd6k7E48DRJ/WIBc/zx3/CGxbFlfn0fIYda7C2W5jK1RpBTXa/2L2BW3IKS1jHbK fkcoCKCmwYacfSAlNgaN77dgTcNtEG/GidS3VSebXLiUS/PT9K0sqsnefCFVltx7 PpFA== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm1; t= 1651091519; x=1651177919; bh=TZiIlAGLV0qFZtyi61sm8zQIrca+f2m0LuJ +RY+dnmk=; b=EaSUpkm2E9PwoOuvNPIzzmzT8TzKM1bUPZbGioQG/j1zTNpOlLM hh6/LEnG5vPF+F7YV3EjniMEMENFPA+9WqGybmBysMX3iBgI06QzNUYSZPkpbIO5 WaeSQSz/VxjG/rnFxZaMlPEMRrLVtK+JhFFCfxnXba68xIfDQdMj4ijTYxmPQtvK eW3KqpiE5OYl5S7tEHl0dYHVRiHYn3kNrZ7x7huNooOmg3cJKciCr/tHRvAvQE2A abo0Wq/l1Q/Nx1Vb+Pp64Rdlrv+ofpMuUiXHmiDgk1ozf++0pp+g7ibZALC5B4lH gd9eKGzAEwAcB4yEgvoD7cEnPAbtT44RV1Q== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeejucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepufgrmhhu vghlucfjohhllhgrnhguuceoshgrmhhuvghlsehshhholhhlrghnugdrohhrgheqnecugg ftrfgrthhtvghrnhepudekteeuudehtdelteevgfduvddvjefhfedulefgudevgeeghefg udefiedtveetnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehmrghilhhfrh homhepshgrmhhuvghlsehshhholhhlrghnugdrohhrgh X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:31:58 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 06/12] ARM: dts: sun9i: Sync from Linux v5.18-rc1 Date: Wed, 27 Apr 2022 15:31:25 -0500 Message-Id: <20220427203132.47271-7-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Copy the devicetree source for the A80 SoC and all existing boards verbatim from the Linux v5.18-rc1 tag. This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/sun9i-a80-cubieboard4.dts | 67 ++++++--- arch/arm/dts/sun9i-a80-optimus.dts | 50 ++++++- arch/arm/dts/sun9i-a80.dtsi | 195 +++++++++++++++---------- 3 files changed, 212 insertions(+), 100 deletions(-) diff --git a/arch/arm/dts/sun9i-a80-cubieboard4.dts b/arch/arm/dts/sun9i-a80-cubieboard4.dts index 85da85faf8..c8ca8cb7f5 100644 --- a/arch/arm/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts @@ -63,12 +63,12 @@ leds { compatible = "gpio-leds"; - green { + led-0 { label = "cubieboard4:green:usr"; gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */ }; - red { + led-1 { label = "cubieboard4:red:usr"; gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ }; @@ -87,33 +87,25 @@ }; vga-dac { - compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; + compatible = "corpro,gm7123", "adi,adv7123"; vdd-supply = <®_dcdc1>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - vga_dac_in: endpoint@0 { - reg = <0>; + vga_dac_in: endpoint { remote-endpoint = <&tcon0_out_vga>; }; }; port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - vga_dac_out: endpoint@0 { - reg = <0>; + vga_dac_out: endpoint { remote-endpoint = <&vga_con_in>; }; }; @@ -133,12 +125,27 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + phy-supply = <®_cldo1>; + status = "okay"; +}; + &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; status = "okay"; }; +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -183,10 +190,26 @@ clocks = <&ac100_rtc 0>; }; +&pio { + vcc-pa-supply = <®_ldo_io1>; + vcc-pb-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dc1sw>; + vcc-pe-supply = <®_eldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_ldo_io0>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_ir { status = "okay"; }; +&r_pio { + vcc-pl-supply = <®_dldo2>; + vcc-pm-supply = <®_eldo3>; +}; + &r_rsb { status = "okay"; @@ -217,6 +240,10 @@ /* unused */ }; + reg_dc1sw: dc1sw { + regulator-name = "vcc-pd"; + }; + reg_dc5ldo: dc5ldo { regulator-always-on; regulator-min-microvolt = <800000>; @@ -271,7 +298,6 @@ }; reg_dldo2: dldo2 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pl"; @@ -290,14 +316,12 @@ }; reg_eldo3: eldo3 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pm-codec-io1"; }; reg_ldo_io0: ldo_io0 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pg"; @@ -385,6 +409,14 @@ */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-gmac-phy"; }; @@ -464,8 +496,7 @@ }; &tcon0_out { - tcon0_out_vga: endpoint@0 { - reg = <0>; + tcon0_out_vga: endpoint { remote-endpoint = <&vga_dac_in>; }; }; diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts index 58a199b0e4..5c3580d712 100644 --- a/arch/arm/dts/sun9i-a80-optimus.dts +++ b/arch/arm/dts/sun9i-a80-optimus.dts @@ -82,7 +82,7 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -91,7 +91,7 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -120,6 +120,21 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + phy-supply = <®_cldo1>; + status = "okay"; +}; + +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -172,10 +187,26 @@ clocks = <&ac100_rtc 0>; }; +&pio { + vcc-pa-supply = <®_ldo_io1>; + vcc-pb-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_ldo_io0>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_ir { status = "okay"; }; +&r_pio { + vcc-pl-supply = <®_dldo2>; + vcc-pm-supply = <®_eldo3>; +}; + &r_rsb { status = "okay"; @@ -213,6 +244,10 @@ regulator-name = "vdd-cpus-09-usbh"; }; + dc1sw { + /* unused */ + }; + reg_dcdc1: dcdc1 { regulator-always-on; regulator-min-microvolt = <3000000>; @@ -260,7 +295,6 @@ }; reg_dldo2: dldo2 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pl"; @@ -279,14 +313,12 @@ }; reg_eldo3: eldo3 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pm-codec-io1"; }; reg_ldo_io0: ldo_io0 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pg"; @@ -374,6 +406,14 @@ */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-gmac-phy"; }; diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi index 25591d6883..ce4fa6706d 100644 --- a/arch/arm/dts/sun9i-a80.dtsi +++ b/arch/arm/dts/sun9i-a80.dtsi @@ -56,6 +56,10 @@ #size-cells = <2>; interrupt-parent = <&gic>; + aliases { + ethernet0 = &gmac; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -183,6 +187,37 @@ clock-output-names = "osc32k"; }; + /* + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. + */ + mii_phy_tx_clk: mii_phy_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: gmac_int_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@800030 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x00800030 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + cpus_clk: clk@8001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; @@ -254,7 +289,7 @@ status = "disabled"; }; - soc { + soc@20000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -283,6 +318,27 @@ }; }; + gmac: ethernet@830000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x00830000 0x1054>; + interrupts = ; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + resets = <&ccu RST_BUS_GMAC>; + reset-names = "stmmaceth"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; @@ -331,16 +387,16 @@ usbphy2: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; - clocks = <&usb_clocks CLK_USB1_HSIC>, + clocks = <&usb_clocks CLK_USB1_PHY>, <&usb_clocks CLK_USB_HSIC>, - <&usb_clocks CLK_USB1_PHY>; - clock-names = "hsic_480M", + <&usb_clocks CLK_USB1_HSIC>; + clock-names = "phy", "hsic_12M", - "phy"; - resets = <&usb_clocks RST_USB1_HSIC>, - <&usb_clocks RST_USB1_PHY>; - reset-names = "hsic", - "phy"; + "hsic_480M"; + resets = <&usb_clocks RST_USB1_PHY>, + <&usb_clocks RST_USB1_HSIC>; + reset-names = "phy", + "hsic"; status = "disabled"; #phy-cells = <0>; /* usb1 is always used with HSIC */ @@ -373,16 +429,16 @@ usbphy3: phy@a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; - clocks = <&usb_clocks CLK_USB2_HSIC>, + clocks = <&usb_clocks CLK_USB2_PHY>, <&usb_clocks CLK_USB_HSIC>, - <&usb_clocks CLK_USB2_PHY>; - clock-names = "hsic_480M", + <&usb_clocks CLK_USB2_HSIC>; + clock-names = "phy", "hsic_12M", - "phy"; - resets = <&usb_clocks RST_USB2_HSIC>, - <&usb_clocks RST_USB2_PHY>; - reset-names = "hsic", - "phy"; + "hsic_480M"; + resets = <&usb_clocks RST_USB2_PHY>, + <&usb_clocks RST_USB2_HSIC>; + reset-names = "phy", + "hsic"; status = "disabled"; #phy-cells = <0>; }; @@ -401,6 +457,15 @@ reg = <0x01700000 0x100>; }; + crypto: crypto@1c02000 { + compatible = "allwinner,sun9i-a80-crypto"; + reg = <0x01c02000 0x1000>; + interrupts = ; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; @@ -465,9 +530,7 @@ compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; clocks = <&ccu CLK_BUS_MMC>; - clock-names = "ahb"; resets = <&ccu RST_BUS_MMC>; - reset-names = "ahb"; #clock-cells = <1>; #reset-cells = <1>; clock-output-names = "mmc0_config", "mmc1_config", @@ -475,7 +538,7 @@ }; gic: interrupt-controller@1c41000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c41000 0x1000>, <0x01c42000 0x2000>, <0x01c44000 0x2000>, @@ -544,12 +607,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_deu0: endpoint@0 { - reg = <0>; + fe0_out_deu0: endpoint { remote-endpoint = <&deu0_in_fe0>; }; }; @@ -571,12 +631,9 @@ #size-cells = <0>; fe1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe1_out_deu1: endpoint@0 { - reg = <0>; + fe1_out_deu1: endpoint { remote-endpoint = <&deu1_in_fe1>; }; }; @@ -614,12 +671,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -657,12 +711,9 @@ }; be1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be1_out_drc1: endpoint@0 { - reg = <0>; + be1_out_drc1: endpoint { remote-endpoint = <&drc1_in_be1>; }; }; @@ -686,12 +737,9 @@ #size-cells = <0>; deu0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu0_in_fe0: endpoint@0 { - reg = <0>; + deu0_in_fe0: endpoint { remote-endpoint = <&fe0_out_deu0>; }; }; @@ -731,12 +779,9 @@ #size-cells = <0>; deu1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu1_in_fe1: endpoint@0 { - reg = <0>; + deu1_in_fe1: endpoint { remote-endpoint = <&fe1_out_deu1>; }; }; @@ -776,23 +821,17 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc0_out_tcon0: endpoint@0 { - reg = <0>; + drc0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_drc0>; }; }; @@ -816,23 +855,17 @@ #size-cells = <0>; drc1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc1_in_be1: endpoint@0 { - reg = <0>; + drc1_in_be1: endpoint { remote-endpoint = <&be1_out_drc1>; }; }; drc1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc1_out_tcon1: endpoint@0 { - reg = <0>; + drc1_out_tcon1: endpoint { remote-endpoint = <&tcon1_in_drc1>; }; }; @@ -845,28 +878,28 @@ interrupts = ; clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; clock-names = "ahb", "tcon-ch0"; - resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; - reset-names = "lcd", "edp"; + resets = <&ccu RST_BUS_LCD0>, + <&ccu RST_BUS_EDP>, + <&ccu RST_BUS_LVDS>; + reset-names = "lcd", + "edp", + "lvds"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_drc0: endpoint@0 { - reg = <0>; + tcon0_in_drc0: endpoint { remote-endpoint = <&drc0_out_tcon0>; }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -886,19 +919,14 @@ #size-cells = <0>; tcon1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon1_in_drc1: endpoint@0 { - reg = <0>; + tcon1_in_drc1: endpoint { remote-endpoint = <&drc1_out_tcon1>; }; }; tcon1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -930,6 +958,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x06000ca0 0x20>; interrupts = ; + clocks = <&osc24M>; }; pio: pinctrl@6000800 { @@ -945,9 +974,20 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; + gmac_rgmii_pins: gmac-rgmii-pins { + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", + "PA7", "PA8", "PA9", "PA10", "PA12", + "PA13", "PA15", "PA16", "PA17"; + function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; + }; + i2c3_pins: i2c3-pins { pins = "PG10", "PG11"; function = "i2c3"; @@ -1126,6 +1166,7 @@ compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; interrupts = ; + clocks = <&osc24M>; }; prcm@8001400 { @@ -1148,7 +1189,7 @@ }; r_ir: ir@8002000 { - compatible = "allwinner,sun5i-a13-ir"; + compatible = "allwinner,sun6i-a31-ir"; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&r_ir_pins>; @@ -1196,7 +1237,7 @@ }; }; - r_rsb: i2c@8003400 { + r_rsb: rsb@8003400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x08003400 0x400>; interrupts = ; From patchwork Wed Apr 27 20:31:26 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623228 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=MjhObd7d; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=LGwvCWSW; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVns2L0tz9s5V for ; Thu, 28 Apr 2022 06:33:37 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 971D683ECA; Wed, 27 Apr 2022 22:32:42 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="MjhObd7d"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="LGwvCWSW"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 0149583ED2; Wed, 27 Apr 2022 22:32:16 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 7CBA383E27 for ; Wed, 27 Apr 2022 22:32:01 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute5.internal (compute5.nyi.internal [10.202.2.45]) by mailout.nyi.internal (Postfix) with ESMTP id A90FF5C01AE; Wed, 27 Apr 2022 16:32:00 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute5.internal (MEProxy); Wed, 27 Apr 2022 16:32:00 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:date:date:from:from:in-reply-to :in-reply-to:message-id:mime-version:references:reply-to:sender :subject:subject:to:to; s=fm2; t=1651091520; x=1651177920; bh=JB /kWvr+VYTcAL7iQGzFxDRPA3SQy7YLe7VQnW4Vn74=; b=MjhObd7dJY0SGfR2z4 nN/JzXXy10kecyQHlAATFA3Sd7P8+8GGeQgN8Aubny1jcM/lzO5S5JjmEKJiphMn p1mGB+lrFf0PNikhvAELLG9PmoQMckCEinbgPKopuTsJlucBz55WGHBq2d6FElnL prNJgDOPweVfvYX21rv+GOVldC70Aw2ST6mdB+02TEOyblFpwc68HsfHYjE/NXwA TvMscxDhrEW3O+Fn3ViE+zE/2pHQ+yi9IgBNghF8YGxOHPF8JeyxOljANFhhW6DZ NnrIt6b43ctvzetR8HFcaig5NxN54VxOcCO23vr9sOnRC8Rc0408nU3dqIjCa5O4 OP0g== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm1; t= 1651091520; x=1651177920; bh=JB/kWvr+VYTcAL7iQGzFxDRPA3SQy7YLe7V QnW4Vn74=; b=LGwvCWSWzkVp/hHLbnDjO9XCwmD+Gugr9XOvKElfHanH1dmKImW 9ib1bH7fZiUpyGsxHfg8P4GUo8jUqXFjPn+lkJa3HPtsTJgGJBl2PyOqVwRc7WBr NcT5UIjERKtpxN6vGDzZ64BBwgCtnFlY1pibOZoK6+eP4jY10AT9Yz5R7SCOw3SL k/WHrU2LN2dEQ8mRQ2QmnbPGc2EpcnODdU4Y8GcTHIgbsfNiQVTYysIHncaRCOuR hJlg+1fRQYtZ9Xj6iMnTsqSsKjCF0W1qFjz3k35LDk43D6DyTOD6MkGRq0cyCf5S lv6Og6igLpnetbjH5LXCmIvgRvhgrBY2utg== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeeiucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepufgrmhhu vghlucfjohhllhgrnhguuceoshgrmhhuvghlsehshhholhhlrghnugdrohhrgheqnecugg ftrfgrthhtvghrnhepudekteeuudehtdelteevgfduvddvjefhfedulefgudevgeeghefg udefiedtveetnecuvehluhhsthgvrhfuihiivgepudenucfrrghrrghmpehmrghilhhfrh homhepshgrmhhuvghlsehshhholhhlrghnugdrohhrgh X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:32:00 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 07/12] ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1 Date: Wed, 27 Apr 2022 15:31:26 -0500 Message-Id: <20220427203132.47271-8-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Copy the devicetree source for the A83T SoC and all existing boards from the Linux v5.18-rc1 tag. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. As with the other SoCs, updates of note include adding detection GPIO properties in the USB PHY nodes. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/axp81x.dtsi | 15 +- .../dts/sun8i-a83t-allwinner-h8homlet-v2.dts | 12 + arch/arm/dts/sun8i-a83t-bananapi-m3.dts | 55 +++- arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 77 ++++- arch/arm/dts/sun8i-a83t-tbs-a711.dts | 101 +++++- arch/arm/dts/sun8i-a83t.dtsi | 311 ++++++++++++++++-- 6 files changed, 515 insertions(+), 56 deletions(-) diff --git a/arch/arm/dts/axp81x.dtsi b/arch/arm/dts/axp81x.dtsi index 043c717dce..b93387b0c1 100644 --- a/arch/arm/dts/axp81x.dtsi +++ b/arch/arm/dts/axp81x.dtsi @@ -48,6 +48,11 @@ interrupt-controller; #interrupt-cells = <1>; + ac_power_supply: ac-power { + compatible = "x-powers,axp813-ac-power-supply"; + status = "disabled"; + }; + axp_adc: adc { compatible = "x-powers,axp813-adc"; #io-channel-cells = <1>; @@ -58,18 +63,18 @@ gpio-controller; #gpio-cells = <2>; - gpio0_ldo: gpio0-ldo { + gpio0_ldo: gpio0-ldo-pin { pins = "GPIO0"; function = "ldo"; }; - gpio1_ldo: gpio1-ldo { + gpio1_ldo: gpio1-ldo-pin { pins = "GPIO1"; function = "ldo"; }; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp813-battery-power-supply"; status = "disabled"; }; @@ -166,4 +171,8 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power { + compatible = "x-powers,axp813-usb-power-supply"; + }; }; diff --git a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 36ecebaff3..9c006fc188 100644 --- a/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -79,6 +79,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -146,6 +154,10 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts index 2beafe3a31..b60016a442 100644 --- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts @@ -74,12 +74,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bananapi-m3:blue:usr"; gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "bananapi-m3:green:usr"; gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; }; @@ -107,6 +107,14 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + &de { status = "okay"; }; @@ -183,6 +191,11 @@ status = "okay"; }; +&r_cir { + clock-frequency = <3000000>; + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -224,6 +237,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; @@ -301,8 +322,8 @@ ®_dldo3 { regulator-always-on; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-name = "vcc-pd"; }; @@ -350,11 +371,37 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo1>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; +}; + &usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { status = "okay"; }; &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts index ecd9ff38a8..e26af7cf10 100644 --- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts @@ -60,25 +60,36 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubietruck-plus:blue:usr"; gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */ }; - orange { + led-1 { label = "cubietruck-plus:orange:usr"; gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */ }; - white { + led-2 { label = "cubietruck-plus:white:usr"; gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */ }; - green { + led-3 { label = "cubietruck-plus:green:usr"; gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */ }; @@ -90,7 +101,7 @@ initial-mode = <1>; /* initialize in HUB mode */ disabled-ports = <1>; intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */ connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ refclk-frequency = <19200000>; }; @@ -145,6 +156,18 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu100 { + cpu-supply = <®_dcdc3>; +}; + +&de { + status = "okay"; +}; + &ehci0 { /* GL830 USB-to-SATA bridge here */ status = "okay"; @@ -164,6 +187,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -239,6 +272,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; @@ -386,11 +427,37 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dcdc1>; + vddio-supply = <®_sw>; + device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; +}; + &usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { status = "okay"; }; &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/dts/sun8i-a83t-tbs-a711.dts index 1537ce148c..13ae10f60d 100644 --- a/arch/arm/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/dts/sun8i-a83t-tbs-a711.dts @@ -46,6 +46,7 @@ #include #include +#include / { model = "TBS A711 Tablet"; @@ -64,7 +65,7 @@ compatible = "pwm-backlight"; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>; - + power-supply = <®_sw>; brightness-levels = <0 1 2 4 8 16 32 64 128 255>; default-brightness-level = <9>; }; @@ -98,6 +99,13 @@ }; }; + reg_gps: reg-gps { + compatible = "regulator-fixed"; + regulator-name = "gps"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + reg_vbat: reg-vbat { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -156,10 +164,39 @@ status = "okay"; }; +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5206"; + reg = <0x38>; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ + reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */ + vcc-supply = <®_ldo_io0>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */ + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; + bus-width = <4>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -171,6 +208,7 @@ vqmmc-supply = <®_dldo1>; non-removable; wakeup-source; + keep-power-in-suspend; status = "okay"; brcmf: wifi@1 { @@ -199,6 +237,25 @@ status = "okay"; }; +&r_lradc { + vref-supply = <®_aldo2>; + status = "okay"; + + button-210 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <210000>; + }; + + button-410 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <410000>; + }; +}; + &r_rsb { status = "okay"; @@ -317,8 +374,8 @@ }; ®_dldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-name = "vdd-csi"; }; @@ -390,8 +447,7 @@ }; &tcon0_out { - tcon0_out_lcd: endpoint@0 { - reg = <0>; + tcon0_out_lcd: endpoint { remote-endpoint = <&panel_input>; }; }; @@ -406,18 +462,45 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vbat>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + max-speed = <1500000>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pb_pins>; + status = "okay"; + + gnss { + compatible = "u-blox,neo-6m"; + + v-bckp-supply = <®_rtc_ldo>; + vcc-supply = <®_gps>; + current-speed = <9600>; + }; }; &usb_otg { - dr_mode = "otg"; status = "okay"; }; &usbphy { - usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; - usb1_vbus_supply = <®_vmain>; - usb2_vbus_supply = <®_vmain>; + usb1_vbus-supply = <®_vmain>; + usb2_vbus-supply = <®_vmain>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi index 2be23d6009..9c07660080 100644 --- a/arch/arm/dts/sun8i-a83t.dtsi +++ b/arch/arm/dts/sun8i-a83t.dtsi @@ -50,6 +50,7 @@ #include #include #include +#include / { interrupt-parent = <&gic>; @@ -61,79 +62,91 @@ #size-cells = <0>; cpu0: cpu@0 { - clocks = <&ccu CLK_C0CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <1>; + #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <2>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <3>; + #cooling-cells = <2>; }; cpu100: cpu@100 { - clocks = <&ccu CLK_C1CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x100>; + #cooling-cells = <2>; }; - cpu@101 { + cpu101: cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x101>; + #cooling-cells = <2>; }; - cpu@102 { + cpu102: cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x102>; + #cooling-cells = <2>; }; - cpu@103 { + cpu103: cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x103>; + #cooling-cells = <2>; }; }; @@ -187,12 +200,7 @@ status = "disabled"; }; - memory { - reg = <0x40000000 0x80000000>; - device_type = "memory"; - }; - - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cluster0 { compatible = "operating-points-v2"; opp-shared; @@ -245,7 +253,7 @@ }; }; - cpu1_opp_table: opp_table1 { + cpu1_opp_table: opp-table-cluster1 { compatible = "operating-points-v2"; opp-shared; @@ -306,16 +314,27 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-a83t-de2-clk"; - reg = <0x01000000 0x100000>; - clocks = <&ccu CLK_PLL_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + reg = <0x01000000 0x10000>; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_PLL_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; }; + rotate: rotate@1020000 { + compatible = "allwinner,sun8i-a83t-de2-rotate"; + reg = <0x1020000 0x10000>; + interrupts = ; + clocks = <&display_clocks CLK_BUS_ROT>, + <&display_clocks CLK_ROT>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_ROT>; + }; + mixer0: mixer@1100000 { compatible = "allwinner,sun8i-a83t-de2-mixer-0"; reg = <0x01100000 0x100000>; @@ -338,6 +357,11 @@ reg = <0>; remote-endpoint = <&tcon0_in_mixer0>; }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; }; }; }; @@ -356,9 +380,17 @@ #size-cells = <0>; mixer1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - mixer1_out_tcon1: endpoint { + mixer1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer1>; + }; + + mixer1_out_tcon1: endpoint@1 { + reg = <1>; remote-endpoint = <&tcon1_in_mixer1>; }; }; @@ -425,6 +457,7 @@ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; @@ -441,11 +474,14 @@ reg = <0>; remote-endpoint = <&mixer0_out_tcon0>; }; + + tcon0_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -465,9 +501,17 @@ #size-cells = <0>; tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - tcon1_in_mixer1: endpoint { + tcon1_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon1>; + }; + + tcon1_in_mixer1: endpoint@1 { + reg = <1>; remote-endpoint = <&mixer1_out_tcon1>; }; }; @@ -549,6 +593,31 @@ sid: eeprom@1c14000 { compatible = "allwinner,sun8i-a83t-sid"; reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 8>; + }; + }; + + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-a83t-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-a83t-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = ; + #mbox-cells = <1>; }; usb_otg: usb@1c19000 { @@ -562,6 +631,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -649,6 +719,20 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + /omit-if-no-ref/ + csi_8bit_parallel_pins: csi-8bit-parallel-pins { + pins = "PE0", "PE2", "PE3", "PE6", "PE7", + "PE8", "PE9", "PE10", "PE11", + "PE12", "PE13"; + function = "csi"; + }; + + /omit-if-no-ref/ + csi_mclk_pin: csi-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + emac_rgmii_pins: emac-rgmii-pins { pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD11", "PD12", "PD13", "PD14", "PD18", @@ -676,6 +760,12 @@ function = "i2c1"; }; + /omit-if-no-ref/ + i2c2_pe_pins: i2c2-pe-pins { + pins = "PE14", "PE15"; + function = "i2c2"; + }; + i2c2_ph_pins: i2c2-ph-pins { pins = "PH4", "PH5"; function = "i2c2"; @@ -747,10 +837,16 @@ pins = "PG8", "PG9"; function = "uart1"; }; + + /omit-if-no-ref/ + uart2_pb_pins: uart2-pb-pins { + pins = "PB0", "PB1"; + function = "uart2"; + }; }; timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + compatible = "allwinner,sun8i-a23-timer"; reg = <0x01c20c00 0xa0>; interrupts = , ; @@ -852,6 +948,39 @@ status = "disabled"; }; + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun8i-a83t-i2c", "allwinner,sun6i-a31-i2c"; @@ -898,12 +1027,10 @@ reg = <0x01c30000 0x104>; interrupts = ; interrupt-names = "macirq"; - resets = <&ccu 13>; - reset-names = "stmmaceth"; - clocks = <&ccu 27>; + clocks = <&ccu CLK_BUS_EMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; status = "disabled"; mdio: mdio { @@ -914,7 +1041,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -924,6 +1051,18 @@ interrupts = ; }; + csi: camera@1cb0000 { + compatible = "allwinner,sun8i-a83t-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun8i-a83t-dw-hdmi"; reg = <0x01ee0000 0x10000>; @@ -935,7 +1074,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; status = "disabled"; @@ -981,7 +1120,7 @@ compatible = "allwinner,sun8i-a83t-r-ccu"; reg = <0x01f01400 0x400>; clocks = <&osc24M>, <&osc16Md512>, <&osc16M>, - <&ccu 6>; + <&ccu CLK_PLL_PERIPH>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; @@ -992,6 +1131,26 @@ reg = <0x1f01c00 0x400>; }; + r_cir: ir@1f02000 { + compatible = "allwinner,sun8i-a83t-ir", + "allwinner,sun6i-a31-ir"; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_APB0_IR>; + interrupts = ; + reg = <0x01f02000 0x400>; + pinctrl-names = "default"; + pinctrl-0 = <&r_cir_pin>; + status = "disabled"; + }; + + r_lradc: lradc@1f03c00 { + compatible = "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01f03c00 0x100>; + interrupts = ; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -1004,6 +1163,11 @@ interrupt-controller; #interrupt-cells = <3>; + r_cir_pin: r-cir-pin { + pins = "PL12"; + function = "s_cir_rx"; + }; + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; @@ -1026,5 +1190,82 @@ #address-cells = <1>; #size-cells = <0>; }; + + ths: thermal-sensor@1f04000 { + compatible = "allwinner,sun8i-a83t-ths"; + reg = <0x01f04000 0x100>; + interrupts = ; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + + trips { + cpu0_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + + trips { + cpu1_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu1_hot>; + cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; }; }; From patchwork Wed Apr 27 20:31:27 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623227 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=k5TkJIkC; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=lTkAQx6W; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVnc3VyHz9s5V for ; Thu, 28 Apr 2022 06:33:24 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 7607F80FD8; Wed, 27 Apr 2022 22:32:39 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="k5TkJIkC"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="lTkAQx6W"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 59D6A83E4F; Wed, 27 Apr 2022 22:32:14 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 4052283E4F for ; Wed, 27 Apr 2022 22:32:03 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute4.internal (compute4.nyi.internal [10.202.2.44]) by mailout.nyi.internal (Postfix) with ESMTP id 726F35C01A5; Wed, 27 Apr 2022 16:32:02 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute4.internal (MEProxy); Wed, 27 Apr 2022 16:32:02 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:date:date:from:from:in-reply-to :in-reply-to:message-id:mime-version:references:reply-to:sender :subject:subject:to:to; s=fm2; t=1651091522; x=1651177922; bh=l7 DqWcWjsUyLeLvE1jTb7nIOJvIMzeTbF2YqeYqMyJc=; b=k5TkJIkCfb6C9b319A OkVuTGS46Vk9LEKSidyBSmtAzyb/B4m15wruItMcTNPD9fmTxSq4dZF/G+oN3Tj8 JAM6VrZ9AbWzCC20/1HB7OlYn79qc1j4T3dn9qPJzkzOKBwHaemtuhRu4239yt7C TNWb1yCNnmasrdbfz6Cm0z0THYxIvNGgqBkwjoIbYSAE2Gtmy6Bvd/kcadFLjGI8 pGq8GzB7zWxLp1bcA/7YVsM8AD+3H5b5LAl3yTWE3inVltLEjitqDp/NOdvWBEY4 QRPKv8E4xxoE1i4Zf5TkjqsgyIxjZzy3EvTcZvUbC2fsnmmLjYiMHKX48Gfv3GWR blkg== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm1; t= 1651091522; x=1651177922; bh=l7DqWcWjsUyLeLvE1jTb7nIOJvIMzeTbF2Y qeYqMyJc=; b=lTkAQx6WL3830vNh7dYWqzQ5JOOJcarodOUF+DObyjSQIs3pYMU nfG0zcPXecPhxmSLdDJQiiq9e1kk92jg016aZliSZD7+fgg6NN3y9hrLUJ93GJda fc92xpTfOqc8VBTdLLl8EUAXSn9NRrTnJQixlyggp8CY9Ad/IHsmAj67gRB94Ehc iOgcncP16gPSDUe0GvbZ8U/YkTZ9qHTeTUClB7go108+1XCDdX0hKexHJWkZ0XlX GKGhuZTEOLvMALJrx58lBuTQJAFzM95pAi6FhPjjKTo9hrtPsq6m5O3MTkwyZzlf 59UbaPdakgMJVgnzxlkyISZH2SIJjFJHtpQ== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeeiucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepufgrmhhu vghlucfjohhllhgrnhguuceoshgrmhhuvghlsehshhholhhlrghnugdrohhrgheqnecugg ftrfgrthhtvghrnhepudekteeuudehtdelteevgfduvddvjefhfedulefgudevgeeghefg udefiedtveetnecuvehluhhsthgvrhfuihiivgepudenucfrrghrrghmpehmrghilhhfrh homhepshgrmhhuvghlsehshhholhhlrghnugdrohhrgh X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:32:01 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 08/12] ARM: dts: sunxi: H2+/H3/H5: Sync from Linux v5.18-rc1 Date: Wed, 27 Apr 2022 15:31:27 -0500 Message-Id: <20220427203132.47271-9-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Copy the devicetree source for the H2+/H3/H5 SoCs and all existing boards from the Linux v5.18-rc1 tag. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2. This commit also adds the following new board devicetree: - sun8i-h3-nanopi-r1.dts This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h5-cpu-opp.dtsi | 2 +- arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts | 9 +- arch/arm/dts/sun50i-h5.dtsi | 6 +- .../dts/sun8i-h2-plus-bananapi-m2-zero.dts | 28 ++- arch/arm/dts/sun8i-h3-beelink-x2.dts | 27 ++- arch/arm/dts/sun8i-h3-nanopi-neo-air.dts | 28 +++ arch/arm/dts/sun8i-h3-nanopi-r1.dts | 169 ++++++++++++++++++ arch/arm/dts/sun8i-h3-nanopi.dtsi | 1 + arch/arm/dts/sun8i-h3-orangepi-2.dts | 3 +- arch/arm/dts/sun8i-h3-orangepi-pc.dts | 3 +- arch/arm/dts/sun8i-h3.dtsi | 10 +- arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 18 +- arch/arm/dts/sunxi-bananapi-m2-plus.dtsi | 4 +- arch/arm/dts/sunxi-h3-h5.dtsi | 42 ++++- arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi | 13 ++ arch/arm/dts/sunxi-libretech-all-h3-it.dtsi | 2 +- 17 files changed, 342 insertions(+), 24 deletions(-) create mode 100644 arch/arm/dts/sun8i-h3-nanopi-r1.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6433f63455..bbd69d3a67 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -655,6 +655,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ sun8i-h3-nanopi-neo-air.dtb \ + sun8i-h3-nanopi-r1.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ sun8i-h3-orangepi-one.dtb \ diff --git a/arch/arm/dts/sun50i-h5-cpu-opp.dtsi b/arch/arm/dts/sun50i-h5-cpu-opp.dtsi index b265720195..1afad8b437 100644 --- a/arch/arm/dts/sun50i-h5-cpu-opp.dtsi +++ b/arch/arm/dts/sun50i-h5-cpu-opp.dtsi @@ -2,7 +2,7 @@ // Copyright (C) 2020 Chen-Yu Tsai / { - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts index 55bcdf8d1a..55b369534a 100644 --- a/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts +++ b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts @@ -142,9 +142,16 @@ status = "okay"; eeprom@51 { - compatible = "microchip,24c02"; + compatible = "microchip,24c02", "atmel,24c02"; reg = <0x51>; pagesize = <16>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + eth_mac1: mac-address@fa { + reg = <0xfa 0x06>; + }; }; }; diff --git a/arch/arm/dts/sun50i-h5.dtsi b/arch/arm/dts/sun50i-h5.dtsi index ab860e20d0..9b3462b13c 100644 --- a/arch/arm/dts/sun50i-h5.dtsi +++ b/arch/arm/dts/sun50i-h5.dtsi @@ -217,7 +217,7 @@ }; }; - gpu_thermal { + gpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; @@ -233,6 +233,10 @@ compatible = "allwinner,sun50i-h5-de2-clk"; }; +&mbus { + compatible = "allwinner,sun50i-h5-mbus"; +}; + &mmc0 { compatible = "allwinner,sun50i-h5-mmc", "allwinner,sun50i-a64-mmc"; diff --git a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts index f3f7a2c912..d5c7b7984d 100644 --- a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -26,6 +26,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -41,8 +52,9 @@ sw4 { label = "power"; - linux,code = ; + linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + wakeup-source; }; }; @@ -103,10 +115,24 @@ cpu-supply = <®_vdd_cpux>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts b/arch/arm/dts/sun8i-h3-beelink-x2.dts index 62b5280ec0..cd9f655e4f 100644 --- a/arch/arm/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts @@ -57,6 +57,12 @@ ethernet1 = &sdiowifi; }; + cec-gpio { + compatible = "cec-gpio"; + cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */ + hdmi-phandle = <&hdmi>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -87,11 +93,15 @@ }; }; - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; - clock-names = "ext_clock"; + r-gpio-keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + wakeup-source; + }; }; sound_spdif { @@ -111,6 +121,13 @@ #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; }; &de { diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts index be49eabbff..cd3df12b65 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts @@ -103,12 +103,40 @@ }; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + }; +}; + &usbphy { /* USB VBUS is always on */ status = "okay"; diff --git a/arch/arm/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/dts/sun8i-h3-nanopi-r1.dts new file mode 100644 index 0000000000..26e2e6172e --- /dev/null +++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Igor Pecovnik + * Copyright (C) 2020 Jayantajit Gogoi + * Copyright (C) 2020 Yu-Tung Chang +*/ + +#include "sun8i-h3-nanopi.dtsi" +#include + +/ { + model = "FriendlyARM NanoPi R1"; + compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3"; + + aliases { + serial1 = &uart1; + ethernet0 = &emac; + ethernet1 = &wifi; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; + + reg_vdd_cpux: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0>, + <1300000 0x1>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; + + leds { + led-2 { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + }; + + led-3 { + function = LED_FUNCTION_LAN; + color = ; + gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */ + }; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + wifi: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3-nanopi.dtsi b/arch/arm/dts/sun8i-h3-nanopi.dtsi index c7c3e7d8b3..fc45d5aaa6 100644 --- a/arch/arm/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/dts/sun8i-h3-nanopi.dtsi @@ -81,6 +81,7 @@ label = "k1"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + wakeup-source; }; }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index 597c425d08..9daffd90c1 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -99,8 +99,9 @@ sw4 { label = "sw4"; - linux,code = ; + linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + wakeup-source; }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts index 5aff8ecc66..90f75fa85e 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -91,8 +91,9 @@ sw4 { label = "sw4"; - linux,code = ; + linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + wakeup-source; }; }; }; diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi index 4e89701df9..eac2349a23 100644 --- a/arch/arm/dts/sun8i-h3.dtsi +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -44,7 +44,7 @@ #include / { - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; @@ -112,7 +112,7 @@ }; }; - gpu_opp_table: gpu-opp-table { + gpu_opp_table: opp-table-gpu { compatible = "operating-points-v2"; opp-120000000 { @@ -245,7 +245,7 @@ cpu_thermal: cpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; - thermal-sensors = <&ths 0>; + thermal-sensors = <&ths>; trips { cpu_hot_trip: cpu-hot { @@ -282,6 +282,10 @@ compatible = "allwinner,sun8i-h3-de2-clk"; }; +&mbus { + compatible = "allwinner,sun8i-h3-mbus"; +}; + &mmc0 { compatible = "allwinner,sun7i-a20-mmc"; clocks = <&ccu CLK_BUS_MMC0>, diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi index 22466afd38..235994a4a2 100644 --- a/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi +++ b/arch/arm/dts/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -16,15 +16,27 @@ regulator-type = "voltage"; regulator-boot-on; regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; + regulator-min-microvolt = <1108475>; + regulator-max-microvolt = <1308475>; regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ gpios-states = <0x1>; - states = <1100000 0>, <1300000 1>; + states = <1108475 0>, <1308475 1>; }; }; &cpu0 { cpu-supply = <®_vdd_cpux>; }; + +&cpu1 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu2 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu3 { + cpu-supply = <®_vdd_cpux>; +}; diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi index 8e5cb3b3fd..d03f5853ef 100644 --- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi @@ -82,8 +82,9 @@ sw4 { label = "power"; - linux,code = ; + linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + wakeup-source; }; }; @@ -219,6 +220,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; + max-speed = <1500000>; clocks = <&rtc 1>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; diff --git a/arch/arm/dts/sunxi-h3-h5.dtsi b/arch/arm/dts/sunxi-h3-h5.dtsi index 9be13378d4..6cea57e07f 100644 --- a/arch/arm/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/dts/sunxi-h3-h5.dtsi @@ -567,9 +567,14 @@ }; mbus: dram-controller@1c62000 { - compatible = "allwinner,sun8i-h3-mbus"; - reg = <0x01c62000 0x1000>; - clocks = <&ccu CLK_MBUS>; + /* compatible is in per SoC .dtsi file */ + reg = <0x01c62000 0x1000>, + <0x01c63000 0x1000>; + reg-names = "mbus", "dram"; + clocks = <&ccu CLK_MBUS>, + <&ccu CLK_DRAM>, + <&ccu CLK_BUS_DRAM>; + clock-names = "mbus", "dram", "bus"; #address-cells = <1>; #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0xc0000000>; @@ -812,8 +817,8 @@ reg-io-width = <1>; interrupts = ; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu CLK_HDMI>; - clock-names = "iahb", "isfr", "tmds"; + <&ccu CLK_HDMI>, <&rtc 0>; + clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; @@ -859,6 +864,15 @@ #clock-cells = <1>; }; + r_intc: interrupt-controller@1f00c00 { + compatible = "allwinner,sun8i-h3-r-intc", + "allwinner,sun6i-a31-r-intc"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x01f00c00 0x400>; + interrupts = ; + }; + r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; @@ -897,6 +911,19 @@ #size-cells = <0>; }; + r_uart: serial@1f02800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01f02800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&r_ccu CLK_APB0_UART>; + resets = <&r_ccu RST_APB0_UART>; + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -922,6 +949,11 @@ pins = "PL10"; function = "s_pwm"; }; + + r_uart_pins: r-uart-pins { + pins = "PL2", "PL3"; + function = "s_uart"; + }; }; r_pwm: pwm@1f03800 { diff --git a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi index 19b3b23cfa..9e14fe5fdc 100644 --- a/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/dts/sunxi-libretech-all-h3-cc.dtsi @@ -49,6 +49,7 @@ label = "power"; linux,code = ; gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + wakeup-source; }; }; @@ -128,6 +129,18 @@ cpu-supply = <®_vdd_cpux>; }; +&cpu1 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu2 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu3 { + cpu-supply = <®_vdd_cpux>; +}; + &de { status = "okay"; }; diff --git a/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi index 204fba3614..50d328c2a8 100644 --- a/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi +++ b/arch/arm/dts/sunxi-libretech-all-h3-it.dtsi @@ -156,7 +156,7 @@ &spi0 { status = "okay"; - spiflash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; From patchwork Wed Apr 27 20:31:28 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623230 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=nMLh6jdy; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=LO+0F/ZU; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVpP2Z3Zz9s5V for ; Thu, 28 Apr 2022 06:34:05 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 6AA3983EE4; Wed, 27 Apr 2022 22:32:48 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="nMLh6jdy"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="LO+0F/ZU"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id B0DDC83EDA; Wed, 27 Apr 2022 22:32:22 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-0.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,PDS_OTHER_BAD_TLD, RCVD_IN_MSPIKE_H3,RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=no autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id E66A383C70 for ; Wed, 27 Apr 2022 22:32:04 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute3.internal (compute3.nyi.internal [10.202.2.43]) by mailout.nyi.internal (Postfix) with ESMTP id 1F82F5C0125; Wed, 27 Apr 2022 16:32:04 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute3.internal (MEProxy); Wed, 27 Apr 2022 16:32:04 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:date:date:from:from:in-reply-to :in-reply-to:message-id:mime-version:references:reply-to:sender :subject:subject:to:to; s=fm2; t=1651091524; x=1651177924; bh=FR Mb4X1XD7Vfcaj2LCp6PumoRP80IcHgE5PpLSNaTUI=; b=nMLh6jdyI90UJBgLXS YAbKinKpGsI4sMPN8Nw2l9P8f85U8yNDE0NEeL1AIiA+P9+Cg4WBp3SkGI7BTIr9 FD/LPB10trJLDVSGxZ3ejbkMBRgcG1RXEJbmdS1ZeQ/iDWK0+NC+kIVVMfePgUPz rh/qFI2yV5fmDdkvQco00AN0Pc89bHnAI/B29mOXngtuTvtzrw+AH48c9wAQAs34 We7xREN1ypJTC2VNWCOyunI18VYceLq8XNqBhOafGDycKy6Ol0APo8g3z6g5hTGG YAkHLlRLgzQdz4mflvF8ITzyMyJV5fQOIL7oC/LUbPxuQ2UqHQCUl7eHv6sNA0Xt Um3g== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm1; t= 1651091524; x=1651177924; bh=FRMb4X1XD7Vfcaj2LCp6PumoRP80IcHgE5P pLSNaTUI=; b=LO+0F/ZU1VtnCh73Lz2M+5jdcNXVS23TCB4jOfOC2MCUmLHDBbd kgYlEOwFvEOLWHgSxZPhBGJ7T9rv1xHHEqJ/Qbw+D//mcTMg1bWesgJWsptRigdG x227dATn0bVlpymLWL9tTrwGi9VCmlHuw5lw4mHw0YmcZC3fcPhVPRTe8Y7/Wucz wffOSL9GVxm++spIm0DcW8BAxGz7MK4M8xacUxYzIqxafrYXwiX8H4JqVQIDJ6cD D3oRxdYJghVqsn4rDYP15LhxhkY/lL4ijXtFB/0/R+0bZJfyqDruPyjRpFRtNf51 4wetkh+4Ycl/dnblHiD7LYOjrRx/n/XHV+Q== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeejucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne gfrhhlucfvnfffucdludejmdenucfjughrpefhvfevufffkffojghfggfgsedtkeertder tddtnecuhfhrohhmpefurghmuhgvlhcujfholhhlrghnugcuoehsrghmuhgvlhesshhhoh hllhgrnhgurdhorhhgqeenucggtffrrghtthgvrhhnpedukeetueduhedtleetvefguddv vdejhfefudelgfduveeggeehgfdufeeitdevteenucevlhhushhtvghrufhiiigvpedune curfgrrhgrmhepmhgrihhlfhhrohhmpehsrghmuhgvlhesshhhohhllhgrnhgurdhorhhg X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:32:03 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 09/12] ARM: dts: sun8i: V3/V3s/S3: Sync from Linux v5.18-rc1 Date: Wed, 27 Apr 2022 15:31:28 -0500 Message-Id: <20220427203132.47271-10-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Copy the devicetree source for the V3(s)/S3 SoCs and all existing boards verbatim from the Linux v5.18-rc1 tag. This commit also adds the following new board devicetrees: - sun8i-s3-elimo-initium.dts - sun8i-v3-sl631-imx179.dts This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/Makefile | 2 + arch/arm/dts/sun8i-s3-elimo-impetus.dtsi | 44 ++++++ arch/arm/dts/sun8i-s3-elimo-initium.dts | 29 ++++ arch/arm/dts/sun8i-s3-pinecube.dts | 13 +- arch/arm/dts/sun8i-v3-sl631-imx179.dts | 12 ++ arch/arm/dts/sun8i-v3-sl631.dtsi | 138 ++++++++++++++++++ arch/arm/dts/sun8i-v3.dtsi | 36 +++++ arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts | 17 ++- arch/arm/dts/sun8i-v3s.dtsi | 93 ++++++++++-- 9 files changed, 358 insertions(+), 26 deletions(-) create mode 100644 arch/arm/dts/sun8i-s3-elimo-impetus.dtsi create mode 100644 arch/arm/dts/sun8i-s3-elimo-initium.dts create mode 100644 arch/arm/dts/sun8i-v3-sl631-imx179.dts create mode 100644 arch/arm/dts/sun8i-v3-sl631.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index bbd69d3a67..059ac7fad8 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -670,7 +670,9 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN8I_V3S) += \ + sun8i-s3-elimo-initium.dtb \ sun8i-s3-pinecube.dtb \ + sun8i-v3-sl631-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN50I_H5) += \ sun50i-h5-bananapi-m2-plus.dtb \ diff --git a/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi new file mode 100644 index 0000000000..052b010a56 --- /dev/null +++ b/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Matteo Scordino + */ + +/dts-v1/; +#include "sun8i-v3.dtsi" +#include "sunxi-common-regulators.dtsi" + +/ { + model = "Elimo Impetus SoM"; + compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pb_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-s3-elimo-initium.dts b/arch/arm/dts/sun8i-s3-elimo-initium.dts new file mode 100644 index 0000000000..039677c2cc --- /dev/null +++ b/arch/arm/dts/sun8i-s3-elimo-initium.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Matteo Scordino + */ + +/dts-v1/; +#include "sun8i-s3-elimo-impetus.dtsi" + +/ { + model = "Elimo Initium"; + compatible = "elimo,initium", "elimo,impetus", "sochip,s3", + "allwinner,sun8i-v3"; + + aliases { + serial1 = &uart1; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pg_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-s3-pinecube.dts b/arch/arm/dts/sun8i-s3-pinecube.dts index 9bab6b7f40..20966e954e 100644 --- a/arch/arm/dts/sun8i-s3-pinecube.dts +++ b/arch/arm/dts/sun8i-s3-pinecube.dts @@ -10,7 +10,7 @@ / { model = "PineCube IP Camera"; - compatible = "pine64,pinecube", "allwinner,sun8i-s3"; + compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3"; aliases { serial0 = &uart2; @@ -64,9 +64,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - csi1_ep: endpoint { remote-endpoint = <&ov5640_ep>; bus-width = <8>; @@ -88,13 +85,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp203", - "x-powers,axp209"; reg = <0x34>; - interrupt-parent = <&gic>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/dts/sun8i-v3-sl631-imx179.dts b/arch/arm/dts/sun8i-v3-sl631-imx179.dts new file mode 100644 index 0000000000..117aeece4e --- /dev/null +++ b/arch/arm/dts/sun8i-v3-sl631-imx179.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2020 Paul Kocialkowski + */ + +#include "sun8i-v3-sl631.dtsi" + +/ { + model = "SL631 Action Camera with IMX179"; + compatible = "allwinner,sl631-imx179", "allwinner,sl631", + "allwinner,sun8i-v3"; +}; diff --git a/arch/arm/dts/sun8i-v3-sl631.dtsi b/arch/arm/dts/sun8i-v3-sl631.dtsi new file mode 100644 index 0000000000..6f93f8c49f --- /dev/null +++ b/arch/arm/dts/sun8i-v3-sl631.dtsi @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2020 Paul Kocialkowski + */ + +/dts-v1/; + +#include "sun8i-v3.dtsi" + +#include +#include + +/ { + model = "SL631 Action Camera"; + compatible = "allwinner,sl631", "allwinner,sun8i-v3"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pb_pins>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-174 { + label = "Down"; + linux,code = ; + channel = <0>; + voltage = <174603>; + }; + + button-384 { + label = "Up"; + linux,code = ; + channel = <0>; + voltage = <384126>; + }; + + button-593 { + label = "OK"; + linux,code = ; + channel = <0>; + voltage = <593650>; + }; +}; + +&mmc0 { + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + vmmc-supply = <®_dcdc3>; + status = "okay"; +}; + +&pio { + vcc-pd-supply = <®_dcdc3>; + vcc-pe-supply = <®_dcdc3>; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-sys-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vdd-3v3"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pg_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-v3.dtsi b/arch/arm/dts/sun8i-v3.dtsi index ca4672ed2e..186c30cbe6 100644 --- a/arch/arm/dts/sun8i-v3.dtsi +++ b/arch/arm/dts/sun8i-v3.dtsi @@ -1,14 +1,40 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2019 Icenowy Zheng + * Copyright (C) 2021 Tobias Schramm */ #include "sun8i-v3s.dtsi" +/ { + soc { + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-v3-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_pins>; + resets = <&ccu RST_BUS_I2S0>; + status = "disabled"; + }; + }; +}; + &ccu { compatible = "allwinner,sun8i-v3-ccu"; }; +&codec_analog { + compatible = "allwinner,sun8i-v3-codec-analog", + "allwinner,sun8i-h3-codec-analog"; +}; + &emac { /delete-property/ phy-handle; /delete-property/ phy-mode; @@ -24,4 +50,14 @@ &pio { compatible = "allwinner,sun8i-v3-pinctrl"; + + i2s0_pins: i2s0-pins { + pins = "PG10", "PG11", "PG12", "PG13"; + function = "i2s"; + }; + + uart1_pg_pins: uart1-pg-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; }; diff --git a/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts index db5cd0b857..752ad05c8f 100644 --- a/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts +++ b/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts @@ -49,16 +49,18 @@ compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero", "allwinner,sun8i-v3s"; + aliases { + ethernet0 = &emac; + }; + leds { /* The LEDs use PG0~2 pins, which conflict with MMC1 */ status = "disabled"; }; }; -&mmc1 { - broken-cd; - bus-width = <4>; - vmmc-supply = <®_vcc3v3>; +&emac { + allwinner,leds-active-low; status = "okay"; }; @@ -94,3 +96,10 @@ voltage = <800000>; }; }; + +&mmc1 { + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi index 0c73416769..084323d5c6 100644 --- a/arch/arm/dts/sun8i-v3s.dtsi +++ b/arch/arm/dts/sun8i-v3s.dtsi @@ -1,5 +1,6 @@ /* * Copyright (C) 2016 Icenowy Zheng + * Copyright (C) 2021 Tobias Schramm * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -157,12 +158,30 @@ syscon: system-control@1c00000 { compatible = "allwinner,sun8i-v3s-system-control", "allwinner,sun8i-h3-system-control"; - reg = <0x01c00000 0x1000>; + reg = <0x01c00000 0xd0>; #address-cells = <1>; #size-cells = <1>; ranges; }; + nmi_intc: interrupt-controller@1c000d0 { + compatible = "allwinner,sun8i-v3s-nmi", + "allwinner,sun9i-a80-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c000d0 0x0c>; + interrupts = ; + }; + + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-v3s-dma"; + reg = <0x01c02000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-v3s-tcon"; reg = <0x01c0c000 0x1000>; @@ -266,6 +285,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; clock-names = "ahb", "mod"; + dmas = <&dma 16>, <&dma 16>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_CE>; reset-names = "ahb"; }; @@ -328,6 +349,12 @@ interrupt-controller; #interrupt-cells = <3>; + /omit-if-no-ref/ + csi0_mclk_pin: csi0-mclk-pin { + pins = "PE20"; + function = "csi_mipi"; + }; + /omit-if-no-ref/ csi1_8bit_pins: csi1-8bit-pins { pins = "PE0", "PE2", "PE3", "PE8", "PE9", @@ -347,6 +374,12 @@ function = "i2c0"; }; + /omit-if-no-ref/ + i2c1_pb_pins: i2c1-pb-pins { + pins = "PB8", "PB9"; + function = "i2c1"; + }; + /omit-if-no-ref/ i2c1_pe_pins: i2c1-pe-pins { pins = "PE21", "PE22"; @@ -401,6 +434,15 @@ clocks = <&osc24M>; }; + pwm: pwm@1c21400 { + compatible = "allwinner,sun8i-v3s-pwm", + "allwinner,sun7i-a20-pwm"; + reg = <0x01c21400 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x400>; @@ -408,6 +450,25 @@ status = "disabled"; }; + codec: codec@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-v3s-codec"; + reg = <0x01c22c00 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + + codec_analog: codec-analog@1c23000 { + compatible = "allwinner,sun8i-v3s-codec-analog"; + reg = <0x01c23000 0x4>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -415,6 +476,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -426,6 +489,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -437,6 +502,8 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; resets = <&ccu RST_BUS_UART2>; pinctrl-0 = <&uart2_pins>; pinctrl-names = "default"; @@ -516,6 +583,8 @@ interrupts = ; clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; resets = <&ccu RST_BUS_SPI0>; @@ -524,6 +593,17 @@ #size-cells = <0>; }; + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x2000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + }; + csi1: camera@1cb4000 { compatible = "allwinner,sun8i-v3s-csi"; reg = <0x01cb4000 0x3000>; @@ -535,16 +615,5 @@ resets = <&ccu RST_BUS_CSI>; status = "disabled"; }; - - gic: interrupt-controller@1c81000 { - compatible = "arm,gic-400"; - reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, - <0x01c84000 0x2000>, - <0x01c86000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = ; - }; }; }; From patchwork Wed Apr 27 20:31:29 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623232 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=oyeqRH0c; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=I5LAlUm/; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVpy09sSz9sBJ for ; Thu, 28 Apr 2022 06:34:33 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id D01428390C; Wed, 27 Apr 2022 22:33:09 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="oyeqRH0c"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="I5LAlUm/"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id E0D2983D67; Wed, 27 Apr 2022 22:32:25 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id A798283D8B for ; Wed, 27 Apr 2022 22:32:06 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute4.internal (compute4.nyi.internal [10.202.2.44]) by mailout.nyi.internal (Postfix) with ESMTP id CF98B5C015E; Wed, 27 Apr 2022 16:32:05 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute4.internal (MEProxy); Wed, 27 Apr 2022 16:32:05 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:date:date:from:from:in-reply-to :in-reply-to:message-id:mime-version:references:reply-to:sender :subject:subject:to:to; s=fm2; t=1651091525; x=1651177925; bh=ux k+7kC1W7jQ1pqk99IqZGFLWvbcH7Cu6o6Qnuvqds8=; b=oyeqRH0c2W4mObmB7O AfQHH3Ui9v38YDPA+963LQ6EMnmWC0H1K34D+X9vQzB61DaeqxTlrcy7sSF0vzb+ 3ne1KxgV5edeOTXrHLjLc3XWf9H7duxP9c3FmD7UjvdyGCin/HPymMiXxd/JKaq3 Ps6k4iJ7O52YC8Xc/mpbHpZo57lDYp+Lr6LZecSFcaFr4pRJ9BZNWzZvSvkvtpy8 XF6x5gkIvyny+iejt4P5jeTpCOZEczppJCAmfwl4tE3nADqOO8S8Kv5/bNpC//Iw vf20ef957rYE2N7mk6gFH8T7L6u1Oe69iWu+JEeawJaDrZ1u0A7Do1WIlcc55WP1 3mrw== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm1; t= 1651091525; x=1651177925; bh=uxk+7kC1W7jQ1pqk99IqZGFLWvbcH7Cu6o6 Qnuvqds8=; b=I5LAlUm/YXu9lrSMkr3F99iqZ8nMw41O4eR4b/V0g5sPBBOWYN7 HZ2/8qBfUIQ/T+gHgY8RHeNkkx+7KZRED7frhLzDewSjRaYpTpaqTRQSzah9NEj5 x0vDHDAM+RNf2c0WYKFka5z2kYXDFnI2+BOEUZnoBOSKc+XdI40R41dapAI/KuOr 0+X7TP5w2P/9DrO4puko7Zc0DPfSRbO9uB//Ztv1y8z7MMFK9CRspAQ/lWEYToZ/ uDyFbyflhkvkMwmYqCbmb0R+rLBOr2YcrBOKZBinTCixht4VEfpEq1uFmi2isuX8 HSZEc7cX+DnMlSZcFHuHIx6q5LwNPYpgboA== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeeiucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepufgrmhhu vghlucfjohhllhgrnhguuceoshgrmhhuvghlsehshhholhhlrghnugdrohhrgheqnecugg ftrfgrthhtvghrnhepudekteeuudehtdelteevgfduvddvjefhfedulefgudevgeeghefg udefiedtveetnecuvehluhhsthgvrhfuihiivgepudenucfrrghrrghmpehmrghilhhfrh homhepshgrmhhuvghlsehshhholhhlrghnugdrohhrgh X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:32:05 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 10/12] ARM: dts: sun8i: R40/T3: Sync from Linux v5.18-rc1 Date: Wed, 27 Apr 2022 15:31:29 -0500 Message-Id: <20220427203132.47271-11-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Copy the devicetree for the R40/T3 SoC verbatim from the Linux v5.18-rc1 tag. None of the existing boards had any devicetree updates. This commit adds the following new board devicetrees: - sun8i-r40-oka40i-c.dts - sun8i-t3-cqa3t-bv3.dts Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/Makefile | 2 + arch/arm/dts/sun8i-r40-feta40i.dtsi | 106 +++++++++++++ arch/arm/dts/sun8i-r40-oka40i-c.dts | 203 +++++++++++++++++++++++++ arch/arm/dts/sun8i-r40.dtsi | 118 ++++++++++++++- arch/arm/dts/sun8i-t3-cqa3t-bv3.dts | 226 ++++++++++++++++++++++++++++ 5 files changed, 653 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/sun8i-r40-feta40i.dtsi create mode 100644 arch/arm/dts/sun8i-r40-oka40i-c.dts create mode 100644 arch/arm/dts/sun8i-t3-cqa3t-bv3.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 059ac7fad8..95909ef037 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -668,6 +668,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-zeropi.dtb dtb-$(CONFIG_MACH_SUN8I_R40) += \ sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-r40-oka40i-c.dtb \ + sun8i-t3-cqa3t-bv3.dtb \ sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN8I_V3S) += \ sun8i-s3-elimo-initium.dtb \ diff --git a/arch/arm/dts/sun8i-r40-feta40i.dtsi b/arch/arm/dts/sun8i-r40-feta40i.dtsi new file mode 100644 index 0000000000..265e0fa57a --- /dev/null +++ b/arch/arm/dts/sun8i-r40-feta40i.dtsi @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// Copyright (C) 2021 Ivan Uvarov +// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is: +// Copyright (C) 2017 Chen-Yu Tsai +// Copyright (C) 2017 Icenowy Zheng + +#include "sun8i-r40.dtsi" + +&i2c0 { + status = "okay"; + + axp22x: pmic@34 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_aldo2>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_dcdc1>; + vcc-pc-supply = <®_aldo2>; + vcc-pd-supply = <®_dcdc1>; + vcc-pf-supply = <®_dldo4>; + vcc-pg-supply = <®_dldo1>; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pa"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; diff --git a/arch/arm/dts/sun8i-r40-oka40i-c.dts b/arch/arm/dts/sun8i-r40-oka40i-c.dts new file mode 100644 index 0000000000..0bd1336206 --- /dev/null +++ b/arch/arm/dts/sun8i-r40-oka40i-c.dts @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// Copyright (C) 2021 Ivan Uvarov +// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is: +// Copyright (C) 2017 Chen-Yu Tsai +// Copyright (C) 2017 Icenowy Zheng + +/dts-v1/; +#include "sun8i-r40-feta40i.dtsi" + +#include +#include + +/ { + model = "Forlinx OKA40i-C"; + compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40"; + + aliases { + ethernet0 = &gmac; + serial0 = &uart0; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; /* RS485 */ + serial7 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-5 { /* this is how the leds are labeled on the board */ + gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ + color = ; + function = LED_FUNCTION_STATUS; + }; + + led-6 { + gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */ + color = ; + function = LED_FUNCTION_STATUS; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; + }; +}; + +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo2>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + phy-supply = <®_dcdc1>; + status = "okay"; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11 + status = "okay"; +}; + +&mmc3 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10 + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_dc1sw { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-lcd"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&tcon_tv0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pg_pins>; + status = "okay"; +}; + +&uart5 { /* RS485 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart5_ph_pins>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pi_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi index d5ad3b9efd..03d3e5f45a 100644 --- a/arch/arm/dts/sun8i-r40.dtsi +++ b/arch/arm/dts/sun8i-r40.dtsi @@ -357,6 +357,8 @@ clock-names = "ahb", "mmc"; resets = <&ccu RST_BUS_MMC3>; reset-names = "ahb"; + pinctrl-0 = <&mmc3_pins>; + pinctrl-names = "default"; interrupts = ; status = "disabled"; #address-cells = <1>; @@ -509,6 +511,16 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + can_ph_pins: can-ph-pins { + pins = "PH20", "PH21"; + function = "can"; + }; + + can_pa_pins: can-pa-pins { + pins = "PA16", "PA17"; + function = "can"; + }; + clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; @@ -601,6 +613,15 @@ bias-pull-up; }; + /omit-if-no-ref/ + mmc3_pins: mmc3-pins { + pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + function = "mmc3"; + drive-strength = <30>; + bias-pull-up; + }; + /omit-if-no-ref/ spi0_pc_pins: spi0-pc-pins { pins = "PC0", "PC1", "PC2"; @@ -631,20 +652,65 @@ function = "spi1"; }; + /omit-if-no-ref/ uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; + /omit-if-no-ref/ + uart2_pi_pins: uart2-pi-pins { + pins = "PI18", "PI19"; + function = "uart2"; + }; + + /omit-if-no-ref/ + uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{ + pins = "PI16", "PI17"; + function = "uart2"; + }; + + /omit-if-no-ref/ uart3_pg_pins: uart3-pg-pins { pins = "PG6", "PG7"; function = "uart3"; }; + /omit-if-no-ref/ uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { pins = "PG8", "PG9"; function = "uart3"; }; + + /omit-if-no-ref/ + uart4_pg_pins: uart4-pg-pins { + pins = "PG10", "PG11"; + function = "uart4"; + }; + + /omit-if-no-ref/ + uart5_ph_pins: uart5-ph-pins { + pins = "PH6", "PH7"; + function = "uart5"; + }; + + /omit-if-no-ref/ + uart7_pi_pins: uart7-pi-pins { + pins = "PI20", "PI21"; + function = "uart7"; + }; + }; + + timer@1c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x90>; + interrupts = , + , + , + , + , + ; + clocks = <&osc24M>; }; wdt: watchdog@1c20c90 { @@ -680,6 +746,45 @@ status = "disabled"; }; + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S0>; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22400 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S1>; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + }; + + i2s2: i2s@1c22800 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-r40-i2s", + "allwinner,sun8i-h3-i2s"; + reg = <0x01c22800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>; + clock-names = "apb", "mod"; + resets = <&ccu RST_BUS_I2S2>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + }; + ths: thermal-sensor@1c24c00 { compatible = "allwinner,sun8i-r40-ths"; reg = <0x01c24c00 0x100>; @@ -831,6 +936,15 @@ #size-cells = <0>; }; + can0: can@1c2bc00 { + compatible = "allwinner,sun8i-r40-can"; + reg = <0x01c2bc00 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_CAN>; + resets = <&ccu RST_BUS_CAN>; + status = "disabled"; + }; + i2c4: i2c@1c2c000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2c000 0x400>; @@ -1117,8 +1231,8 @@ reg-io-width = <1>; interrupts = ; clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, - <&ccu CLK_HDMI>; - clock-names = "iahb", "isfr", "tmds"; + <&ccu CLK_HDMI>, <&rtc 0>; + clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; diff --git a/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts new file mode 100644 index 0000000000..6931aaab23 --- /dev/null +++ b/arch/arm/dts/sun8i-t3-cqa3t-bv3.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2017 Chen-Yu Tsai + * Copyright (C) 2017 Icenowy Zheng + * Copyright (C) 2018 Hao Zhang + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-r40.dtsi" + +#include + +/ { + model = "t3-cqa3t-bv3"; + compatible = "qihua,t3-cqa3t-bv3", "allwinner,sun8i-t3", + "allwinner,sun8i-r40"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + enable-active-high; + }; +}; + +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c0 { + status = "okay"; + + axp22x: pmic@34 { + compatible = "x-powers,axp221"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pg"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-dldo3"; +}; + +®_eldo3 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; + +&tcon_tv0 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v0>; + usb2_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; From patchwork Wed Apr 27 20:31:30 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623229 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=Q0rJdG/R; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=Y/WMMYT4; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVp71jt0z9s5V for ; Thu, 28 Apr 2022 06:33:51 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 43A0183EDA; Wed, 27 Apr 2022 22:32:46 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="Q0rJdG/R"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="Y/WMMYT4"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 087DE83ED8; Wed, 27 Apr 2022 22:32:22 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 5199F83D81 for ; Wed, 27 Apr 2022 22:32:08 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute5.internal (compute5.nyi.internal [10.202.2.45]) by mailout.nyi.internal (Postfix) with ESMTP id 7AE215C0051; Wed, 27 Apr 2022 16:32:07 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute5.internal (MEProxy); Wed, 27 Apr 2022 16:32:07 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:date:date:from:from:in-reply-to :in-reply-to:message-id:mime-version:references:reply-to:sender :subject:subject:to:to; s=fm2; t=1651091527; x=1651177927; bh=0/ OeaiU3rBI8CVvpLZ/dEbG8gdvyPF4ICrA93SJbJ+M=; b=Q0rJdG/RYipKyOX4Oe 34hCVNVMlNY+JubZ/SQf4EyCqu21R5ytE4xC+4bqL5QF+dn1h5aZZ08VOIvqNCBs r6uP0d6SN0ig8puYHEDVEUZ/gFDm1yg7Q/lYcW/trOsPMus+ddAbQL15hdxl6Ayv I6eKQAwqrjX3laWERZEf95SJ03aO4qsa/LbDb0NWJCtfJFQHrvmf94EfBnZgNATg Xmgy47B9nEgodEhVUuT6lxbh9Q7igWm4B1b7GLyBiG8GkgYQoYAUWByhP4oswdLR bXGukr33tM/IAdAItUjWs0q4NRAdfyZK0HsOg5M3PLylC3I4QYqKN3CfFeNatsk6 ZHmA== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding:date:date :from:from:in-reply-to:in-reply-to:message-id:mime-version :references:reply-to:sender:subject:subject:to:to:x-me-proxy :x-me-proxy:x-me-sender:x-me-sender:x-sasl-enc; s=fm1; t= 1651091527; x=1651177927; bh=0/OeaiU3rBI8CVvpLZ/dEbG8gdvyPF4ICrA 93SJbJ+M=; b=Y/WMMYT4s2E1tHE5w3dK+djtrLXx6XSoRid9U8vbq4a7SToMWJk w54LXx0cPkIR3NNMsmuAnelCnKDz80jQR83jw8tNot+ydQnNrq9pn4RJ3aj26G+4 tUwblqnDyQWvhRRPSFm+Jl7FshBW3bSdPwuMHmiPlUx/iKHEZTcbswTARZPTZrhg Y7rD76asHvrVW3MpFm6QQgjtWiFWczIEk8gbPhA461+VulYHhUT/VzN8YpXnXKsH 6KAWfxwy6hJ85TwCSl98fkuevdYZ+CIvDO0KqocMwTxFqfXsSWQ9E24V8qmpIZCj mefp6vnzSJMPTa3nux3avcjTpyD5Oj9snpw== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeejucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepufgrmhhu vghlucfjohhllhgrnhguuceoshgrmhhuvghlsehshhholhhlrghnugdrohhrgheqnecugg ftrfgrthhtvghrnhepudekteeuudehtdelteevgfduvddvjefhfedulefgudevgeeghefg udefiedtveetnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehmrghilhhfrh homhepshgrmhhuvghlsehshhholhhlrghnugdrohhrgh X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:32:06 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 11/12] ARM: dts: sun50i: A64: Sync from Linux v5.18-rc1 Date: Wed, 27 Apr 2022 15:31:30 -0500 Message-Id: <20220427203132.47271-12-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Copy the devicetree source for the A64 SoC and all existing boards from the Linux v5.18-rc1 tag. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 189bef235dd3 and 73088dfee635. This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/axp803.dtsi | 10 +-- arch/arm/dts/sun50i-a64-cpu-opp.dtsi | 2 +- arch/arm/dts/sun50i-a64-orangepi-win.dts | 2 +- arch/arm/dts/sun50i-a64-pinebook.dts | 1 + arch/arm/dts/sun50i-a64-pinephone.dtsi | 27 +++++++ arch/arm/dts/sun50i-a64-pinetab.dts | 29 +++++++- arch/arm/dts/sun50i-a64-teres-i.dts | 4 +- arch/arm/dts/sun50i-a64.dtsi | 93 ++++++++++++++++++------ 8 files changed, 137 insertions(+), 31 deletions(-) diff --git a/arch/arm/dts/axp803.dtsi b/arch/arm/dts/axp803.dtsi index 10e9186a76..578ef368e2 100644 --- a/arch/arm/dts/axp803.dtsi +++ b/arch/arm/dts/axp803.dtsi @@ -10,7 +10,7 @@ interrupt-controller; #interrupt-cells = <1>; - ac_power_supply: ac-power-supply { + ac_power_supply: ac-power { compatible = "x-powers,axp803-ac-power-supply", "x-powers,axp813-ac-power-supply"; status = "disabled"; @@ -26,18 +26,18 @@ gpio-controller; #gpio-cells = <2>; - gpio0_ldo: gpio0-ldo { + gpio0_ldo: gpio0-ldo-pin { pins = "GPIO0"; function = "ldo"; }; - gpio1_ldo: gpio1-ldo { + gpio1_ldo: gpio1-ldo-pin { pins = "GPIO1"; function = "ldo"; }; }; - battery_power_supply: battery-power-supply { + battery_power_supply: battery-power { compatible = "x-powers,axp803-battery-power-supply", "x-powers,axp813-battery-power-supply"; status = "disabled"; @@ -147,7 +147,7 @@ }; }; - usb_power_supply: usb-power-supply { + usb_power_supply: usb-power { compatible = "x-powers,axp803-usb-power-supply", "x-powers,axp813-usb-power-supply"; status = "disabled"; diff --git a/arch/arm/dts/sun50i-a64-cpu-opp.dtsi b/arch/arm/dts/sun50i-a64-cpu-opp.dtsi index 578c37490d..e39db51eb4 100644 --- a/arch/arm/dts/sun50i-a64-cpu-opp.dtsi +++ b/arch/arm/dts/sun50i-a64-cpu-opp.dtsi @@ -4,7 +4,7 @@ */ / { - cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-cpu { compatible = "operating-points-v2"; opp-shared; diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts index 70e31743f0..8eee8051ac 100644 --- a/arch/arm/dts/sun50i-a64-orangepi-win.dts +++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts @@ -343,7 +343,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts index 7ae16541d1..68b6ab4707 100644 --- a/arch/arm/dts/sun50i-a64-pinebook.dts +++ b/arch/arm/dts/sun50i-a64-pinebook.dts @@ -15,6 +15,7 @@ / { model = "Pinebook"; compatible = "pine64,pinebook", "allwinner,sun50i-a64"; + chassis-type = "laptop"; aliases { serial0 = &uart0; diff --git a/arch/arm/dts/sun50i-a64-pinephone.dtsi b/arch/arm/dts/sun50i-a64-pinephone.dtsi index 9f69d489a8..b25e7913f5 100644 --- a/arch/arm/dts/sun50i-a64-pinephone.dtsi +++ b/arch/arm/dts/sun50i-a64-pinephone.dtsi @@ -12,6 +12,8 @@ #include / { + chassis-type = "handset"; + aliases { ethernet0 = &rtl8723cs; serial0 = &uart0; @@ -25,6 +27,11 @@ /* Backlight configuration differs per PinePhone revision. */ }; + bt_sco_codec: bt-sco-codec { + #sound-dai-cells = <1>; + compatible = "linux,bt-sco"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -91,6 +98,8 @@ }; &codec { + pinctrl-names = "default"; + pinctrl-0 = <&aif3_pins>; status = "okay"; }; @@ -426,6 +435,7 @@ &sound { status = "okay"; + simple-audio-card,name = "PinePhone"; simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; simple-audio-card,widgets = "Microphone", "Headset Microphone", "Microphone", "Internal Microphone", @@ -447,6 +457,23 @@ "MIC1", "Internal Microphone", "Headset Microphone", "HBIAS", "MIC2", "Headset Microphone"; + + simple-audio-card,dai-link@2 { + format = "dsp_a"; + frame-master = <&link2_codec>; + bitclock-master = <&link2_codec>; + bitclock-inversion; + + link2_cpu: cpu { + sound-dai = <&bt_sco_codec 0>; + }; + + link2_codec: codec { + sound-dai = <&codec 2>; + dai-tdm-slot-num = <1>; + dai-tdm-slot-width = <32>; + }; + }; }; &uart0 { diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts index 422a8507f6..0b2258ef88 100644 --- a/arch/arm/dts/sun50i-a64-pinetab.dts +++ b/arch/arm/dts/sun50i-a64-pinetab.dts @@ -16,6 +16,7 @@ / { model = "PineTab, Development Sample"; compatible = "pine64,pinetab", "allwinner,sun50i-a64"; + chassis-type = "tablet"; aliases { serial0 = &uart0; @@ -35,6 +36,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + i2c-csi { compatible = "i2c-gpio"; sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */ @@ -77,7 +89,7 @@ sound-name-prefix = "Speaker Amp"; }; - vdd_bl: regulator@0 { + vdd_bl: regulator { compatible = "regulator-fixed"; regulator-name = "bl-3v3"; regulator-min-microvolt = <3300000>; @@ -410,6 +422,21 @@ regulator-name = "vcc-rtc"; }; +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &sound { status = "okay"; simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts index f0a16f355e..6668431dcb 100644 --- a/arch/arm/dts/sun50i-a64-teres-i.dts +++ b/arch/arm/dts/sun50i-a64-teres-i.dts @@ -14,6 +14,7 @@ / { model = "Olimex A64 Teres-I"; compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64"; + chassis-type = "laptop"; aliases { serial0 = &uart0; @@ -139,6 +140,8 @@ #size-cells = <0>; port@0 { + reg = <0>; + anx6345_in: endpoint { remote-endpoint = <&tcon0_out_anx6345>; }; @@ -206,7 +209,6 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - wakeup-source; }; }; diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi index 57786fc120..555bc92a6f 100644 --- a/arch/arm/dts/sun50i-a64.dtsi +++ b/arch/arm/dts/sun50i-a64.dtsi @@ -102,6 +102,22 @@ status = "disabled"; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + }; + + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + }; + + opp-432000000 { + opp-hz = /bits/ 64 <432000000>; + }; + }; + osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -131,12 +147,10 @@ }; sound: sound { + #address-cells = <1>; + #size-cells = <0>; compatible = "simple-audio-card"; simple-audio-card,name = "sun50i-a64-audio"; - simple-audio-card,format = "i2s"; - simple-audio-card,frame-master = <&cpudai>; - simple-audio-card,bitclock-master = <&cpudai>; - simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = "Left DAC", "DACL", @@ -145,12 +159,19 @@ "ADCR", "Right ADC"; status = "disabled"; - cpudai: simple-audio-card,cpu { - sound-dai = <&dai>; - }; + simple-audio-card,dai-link@0 { + format = "i2s"; + frame-master = <&link0_cpu>; + bitclock-master = <&link0_cpu>; + mclk-fs = <128>; + + link0_cpu: cpu { + sound-dai = <&dai>; + }; - link_codec: simple-audio-card,codec { - sound-dai = <&codec>; + link0_codec: codec { + sound-dai = <&codec 0>; + }; }; }; @@ -658,6 +679,18 @@ interrupt-controller; #interrupt-cells = <3>; + /omit-if-no-ref/ + aif2_pins: aif2-pins { + pins = "PB4", "PB5", "PB6", "PB7"; + function = "aif2"; + }; + + /omit-if-no-ref/ + aif3_pins: aif3-pins { + pins = "PG10", "PG11", "PG12", "PG13"; + function = "aif3"; + }; + csi_pins: csi-pins { pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11"; @@ -798,6 +831,23 @@ }; }; + timer@1c20c00 { + compatible = "allwinner,sun50i-a64-timer", + "allwinner,sun8i-a23-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = , + ; + clocks = <&osc24M>; + }; + + wdt0: watchdog@1c20ca0 { + compatible = "allwinner,sun50i-a64-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = ; + clocks = <&osc24M>; + }; + spdif: spdif@1c21000 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-a64-spdif", @@ -878,7 +928,7 @@ }; codec: codec@1c22e00 { - #sound-dai-cells = <0>; + #sound-dai-cells = <1>; compatible = "allwinner,sun50i-a64-codec", "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x600>; @@ -1067,6 +1117,7 @@ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; clock-names = "bus", "core"; resets = <&ccu RST_BUS_GPU>; + operating-points-v2 = <&gpu_opp_table>; }; gic: interrupt-controller@1c81000 { @@ -1093,8 +1144,14 @@ mbus: dram-controller@1c62000 { compatible = "allwinner,sun50i-a64-mbus"; - reg = <0x01c62000 0x1000>; - clocks = <&ccu 112>; + reg = <0x01c62000 0x1000>, + <0x01c63000 0x1000>; + reg-names = "mbus", "dram"; + clocks = <&ccu CLK_MBUS>, + <&ccu CLK_DRAM>, + <&ccu CLK_BUS_DRAM>; + clock-names = "mbus", "dram", "bus"; + interrupts = ; #address-cells = <1>; #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0xc0000000>; @@ -1167,8 +1224,8 @@ reg-io-width = <1>; interrupts = ; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu CLK_HDMI>; - clock-names = "iahb", "isfr", "tmds"; + <&ccu CLK_HDMI>, <&rtc 0>; + clock-names = "iahb", "isfr", "tmds", "cec"; resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; @@ -1321,13 +1378,5 @@ #address-cells = <1>; #size-cells = <0>; }; - - wdt0: watchdog@1c20ca0 { - compatible = "allwinner,sun50i-a64-wdt", - "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - interrupts = ; - clocks = <&osc24M>; - }; }; }; From patchwork Wed Apr 27 20:31:31 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Samuel Holland X-Patchwork-Id: 1623233 X-Patchwork-Delegate: andre.przywara@arm.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.a=rsa-sha256 header.s=fm2 header.b=tWdt+SVh; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.a=rsa-sha256 header.s=fm1 header.b=lzOVwcpu; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=85.214.62.61; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by bilbo.ozlabs.org (Postfix) with ESMTPS id 4KpVq96QRMz9sBJ for ; Thu, 28 Apr 2022 06:34:45 +1000 (AEST) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id A7C1583EF0; Wed, 27 Apr 2022 22:33:13 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=sholland.org header.i=@sholland.org header.b="tWdt+SVh"; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=messagingengine.com header.i=@messagingengine.com header.b="lzOVwcpu"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 7362683D67; Wed, 27 Apr 2022 22:32:33 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_MSPIKE_H3, RCVD_IN_MSPIKE_WL,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from out1-smtp.messagingengine.com (out1-smtp.messagingengine.com [66.111.4.25]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id E048183E81 for ; Wed, 27 Apr 2022 22:32:09 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=none (p=none dis=none) header.from=sholland.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=samuel@sholland.org Received: from compute4.internal (compute4.nyi.internal [10.202.2.44]) by mailout.nyi.internal (Postfix) with ESMTP id 1ABCC5C017F; Wed, 27 Apr 2022 16:32:09 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute4.internal (MEProxy); Wed, 27 Apr 2022 16:32:09 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sholland.org; h= cc:cc:content-transfer-encoding:content-type:date:date:from:from :in-reply-to:in-reply-to:message-id:mime-version:references :reply-to:sender:subject:subject:to:to; s=fm2; t=1651091529; x= 1651177929; bh=/Fxmn/YryZx2xnY/qID2914KxYqN/zOl14Bg9TSCkSk=; b=t Wdt+SVhAC3U8bx66inXeb6dzEPm0q5zPlEcHK9KdZCQafe5/zcLQaMt6//bGC4K0 6P6ty+deg9laMOVFAbKbmKLavOtZW0q+tnG4Mx8VaJGJsTCxyOI4/COJubUWkwVC L77rA2Dl/0mqsRtREKQN6rGsM45+3E9m7O7d5kTBN27BQq5GOyfZBiOFyUNo8PxX E9CTGCQGbqKZ0HIGOmoj03fE2lDrUS8Ud7cs5ut/yKVop6c/i4nwLjeVyQuO1uWh Tg/UQ49bmJlaJiFPJirAVxexf33hU4uOEX6+YeWjjC7GvsggLXRfvPsft4iQ19XQ m/c6gSGmpVLtYjRng9YiQ== DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:cc:content-transfer-encoding :content-type:date:date:from:from:in-reply-to:in-reply-to :message-id:mime-version:references:reply-to:sender:subject :subject:to:to:x-me-proxy:x-me-proxy:x-me-sender:x-me-sender :x-sasl-enc; s=fm1; t=1651091529; x=1651177929; bh=/Fxmn/YryZx2x nY/qID2914KxYqN/zOl14Bg9TSCkSk=; b=lzOVwcpu/hNuOGmVEML25vPQxBmfi MqZikxFMqEu3P9I0pjJomGpNoSeDPz8NDduu5AKzl2CyS7yo6Dryt2gp48VE07mS 1wl0r+I29WsLpd1qPA4bn5iGM/yENSpyaLY64kDqf6eCa7drsflIBw/QbFOWNxGF KLcOkTJlLxqwhqYiww6wAiVFMy5uALCbqQa6zzNoEUshde87qi7AqAdCeIGTui0/ BG6fFimTgVPGAjCsbqL+UrMmPFwTJBOGUQuNU0XlJTSPWaQJIiQT0T2DoH5mjHL8 0DtiiE06dk27jqgyb3iRQECjNm4Yrko4BYrN0e9nUl+TWGaOvQ+JqMasg== X-ME-Sender: X-ME-Received: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgedvfedrudehgddugeeiucetufdoteggodetrfdotf fvucfrrhhofhhilhgvmecuhfgrshhtofgrihhlpdfqfgfvpdfurfetoffkrfgpnffqhgen uceurghilhhouhhtmecufedttdenucesvcftvggtihhpihgvnhhtshculddquddttddmne cujfgurhephffvvefufffkofgjfhggtgfgsehtkeertdertdejnecuhfhrohhmpefurghm uhgvlhcujfholhhlrghnugcuoehsrghmuhgvlhesshhhohhllhgrnhgurdhorhhgqeenuc ggtffrrghtthgvrhhnpeefueevueeffeelheelhfelgeelgffgieekffevteefveejueei teeugfefieehleenucevlhhushhtvghrufhiiigvpedunecurfgrrhgrmhepmhgrihhlfh hrohhmpehsrghmuhgvlhesshhhohhllhgrnhgurdhorhhg X-ME-Proxy: Received: by mail.messagingengine.com (Postfix) with ESMTPA; Wed, 27 Apr 2022 16:32:08 -0400 (EDT) From: Samuel Holland To: u-boot@lists.denx.de, Jagan Teki , Andre Przywara Cc: Samuel Holland , Tom Rini Subject: [PATCH 12/12] ARM: dts: sun50i: H6: Sync from Linux v5.18-rc1 Date: Wed, 27 Apr 2022 15:31:31 -0500 Message-Id: <20220427203132.47271-13-samuel@sholland.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220427203132.47271-1-samuel@sholland.org> References: <20220427203132.47271-1-samuel@sholland.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.5 at phobos.denx.de X-Virus-Status: Clean Copy the devicetree source for the H6 SoC and all existing boards from the Linux v5.18-rc1 tag. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 189bef235dd3 and 73088dfee635. This commit also adds the following new board devicetrees: - sun50i-h6-pine-h64-model-b.dts - sun50i-h6-tanix-tx6-mini.dts This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara --- arch/arm/dts/Makefile | 4 +- arch/arm/dts/sun50i-h6-beelink-gs1.dts | 38 ++-- arch/arm/dts/sun50i-h6-cpu-opp.dtsi | 2 +- arch/arm/dts/sun50i-h6-orangepi-3.dts | 14 +- arch/arm/dts/sun50i-h6-orangepi.dtsi | 22 +-- arch/arm/dts/sun50i-h6-pine-h64-model-b.dts | 51 ++++++ arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts | 15 ++ arch/arm/dts/sun50i-h6-tanix-tx6.dts | 115 ++---------- arch/arm/dts/sun50i-h6-tanix.dtsi | 189 ++++++++++++++++++++ arch/arm/dts/sun50i-h6.dtsi | 26 ++- 10 files changed, 328 insertions(+), 148 deletions(-) create mode 100644 arch/arm/dts/sun50i-h6-pine-h64-model-b.dts create mode 100644 arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts create mode 100644 arch/arm/dts/sun50i-h6-tanix.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 95909ef037..85e731aec9 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -695,7 +695,9 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-orangepi-lite2.dtb \ sun50i-h6-orangepi-one-plus.dtb \ sun50i-h6-pine-h64.dtb \ - sun50i-h6-tanix-tx6.dtb + sun50i-h6-pine-h64-model-b.dtb \ + sun50i-h6-tanix-tx6.dtb \ + sun50i-h6-tanix-tx6-mini.dtb dtb-$(CONFIG_MACH_SUN50I_H616) += \ sun50i-h616-orangepi-zero2.dtb dtb-$(CONFIG_MACH_SUN50I) += \ diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts index b5808047d6..649b146dff 100644 --- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts +++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts @@ -150,12 +150,28 @@ vcc-pg-supply = <®_aldo1>; }; -&r_i2c { +&r_ir { + linux,rc-map-name = "rc-beelink-gs1"; + status = "okay"; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <®_aldo1>; + */ + vcc-pm-supply = <®_aldo1>; +}; + +&r_rsb { status = "okay"; - axp805: pmic@36 { + axp805: pmic@745 { compatible = "x-powers,axp805", "x-powers,axp806"; - reg = <0x36>; + reg = <0x745>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -273,22 +289,6 @@ }; }; -&r_ir { - linux,rc-map-name = "rc-beelink-gs1"; - status = "okay"; -}; - -&r_pio { - /* - * PL0 and PL1 are used for PMIC I2C - * don't enable the pl-supply else - * it will fail at boot - * - * vcc-pl-supply = <®_aldo1>; - */ - vcc-pm-supply = <®_aldo1>; -}; - &spdif { status = "okay"; }; diff --git a/arch/arm/dts/sun50i-h6-cpu-opp.dtsi b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi index 8c6e8536b6..0baf0f8e4d 100644 --- a/arch/arm/dts/sun50i-h6-cpu-opp.dtsi +++ b/arch/arm/dts/sun50i-h6-cpu-opp.dtsi @@ -3,7 +3,7 @@ // Copyright (C) 2020 Clément Péron / { - cpu_opp_table: cpu-opp-table { + cpu_opp_table: opp-table-cpu { compatible = "allwinner,sun50i-h6-operating-points"; nvmem-cells = <&cpu_speed_grade>; opp-shared; diff --git a/arch/arm/dts/sun50i-h6-orangepi-3.dts b/arch/arm/dts/sun50i-h6-orangepi-3.dts index 7e83f6146f..9f12c05e21 100644 --- a/arch/arm/dts/sun50i-h6-orangepi-3.dts +++ b/arch/arm/dts/sun50i-h6-orangepi-3.dts @@ -175,12 +175,16 @@ vcc-pg-supply = <®_vcc_wifi_io>; }; -&r_i2c { +&r_ir { + status = "okay"; +}; + +&r_rsb { status = "okay"; - axp805: pmic@36 { + axp805: pmic@745 { compatible = "x-powers,axp805", "x-powers,axp806"; - reg = <0x36>; + reg = <0x745>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -291,10 +295,6 @@ }; }; -&r_ir { - status = "okay"; -}; - &rtc { clocks = <&ext_osc32k>; }; diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-orangepi.dtsi index da0875bd38..a5811d55bb 100644 --- a/arch/arm/dts/sun50i-h6-orangepi.dtsi +++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi @@ -112,12 +112,20 @@ vcc-pg-supply = <®_aldo1>; }; -&r_i2c { +&r_ir { + status = "okay"; +}; + +&r_pio { + vcc-pm-supply = <®_bldo3>; +}; + +&r_rsb { status = "okay"; - axp805: pmic@36 { + axp805: pmic@745 { compatible = "x-powers,axp805", "x-powers,axp806"; - reg = <0x36>; + reg = <0x745>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; @@ -232,14 +240,6 @@ }; }; -&r_ir { - status = "okay"; -}; - -&r_pio { - vcc-pm-supply = <®_bldo3>; -}; - &rtc { clocks = <&ext_osc32k>; }; diff --git a/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts b/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts new file mode 100644 index 0000000000..686f58e770 --- /dev/null +++ b/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2019 Corentin LABBE + */ + +#include "sun50i-h6-pine-h64.dts" + +/ { + model = "Pine H64 model B"; + compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6"; + + /delete-node/ reg_gmac_3v3; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + post-power-on-delay-ms = <200>; + }; +}; + +&hdmi_connector { + /delete-property/ ddc-en-gpios; +}; + +&emac { + phy-supply = <®_aldo2>; +}; + +&mmc1 { + vmmc-supply = <®_cldo3>; + vqmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + max-speed = <1500000>; + }; +}; diff --git a/arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts b/arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts new file mode 100644 index 0000000000..08d84160d8 --- /dev/null +++ b/arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2021 Jernej Skrabec + +/dts-v1/; + +#include "sun50i-h6-tanix.dtsi" + +/ { + model = "Tanix TX6 mini"; + compatible = "oranth,tanix-tx6-mini", "allwinner,sun50i-h6"; +}; + +&r_ir { + linux,rc-map-name = "rc-tanix-tx3mini"; +}; diff --git a/arch/arm/dts/sun50i-h6-tanix-tx6.dts b/arch/arm/dts/sun50i-h6-tanix-tx6.dts index be81330db1..9a38ff9b3f 100644 --- a/arch/arm/dts/sun50i-h6-tanix-tx6.dts +++ b/arch/arm/dts/sun50i-h6-tanix-tx6.dts @@ -3,122 +3,27 @@ /dts-v1/; -#include "sun50i-h6.dtsi" -#include "sun50i-h6-cpu-opp.dtsi" - -#include +#include "sun50i-h6-tanix.dtsi" / { model = "Tanix TX6"; compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_vdd_cpu_gpu: vdd-cpu-gpu { - compatible = "regulator-fixed"; - regulator-name = "vdd-cpu-gpu"; - regulator-min-microvolt = <1135000>; - regulator-max-microvolt = <1135000>; - }; -}; - -&cpu0 { - cpu-supply = <®_vdd_cpu_gpu>; -}; - -&de { - status = "okay"; -}; - -&dwc3 { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci3 { - status = "okay"; -}; - -&gpu { - mali-supply = <®_vdd_cpu_gpu>; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; - bus-width = <4>; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; }; &r_ir { linux,rc-map-name = "rc-tanix-tx5max"; - status = "okay"; }; -&uart0 { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; -}; -&usb2otg { - dr_mode = "host"; - status = "okay"; -}; - -&usb2phy { - status = "okay"; -}; - -&usb3phy { - status = "okay"; + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + }; }; diff --git a/arch/arm/dts/sun50i-h6-tanix.dtsi b/arch/arm/dts/sun50i-h6-tanix.dtsi new file mode 100644 index 0000000000..edb71e4a03 --- /dev/null +++ b/arch/arm/dts/sun50i-h6-tanix.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2019 Jernej Skrabec + +/dts-v1/; + +#include "sun50i-h6.dtsi" +#include "sun50i-h6-cpu-opp.dtsi" + +#include + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + /* used for FD650 LED display driver */ + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */ + scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */ + i2c-gpio,delay-us = <5>; + }; + + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpu-gpu"; + regulator-min-microvolt = <1135000>; + regulator-max-microvolt = <1135000>; + }; + + sound-spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "sun50i-h6-spdif"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpu_gpu>; +}; + +&de { + status = "okay"; +}; + +&dwc3 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&gpu { + mali-supply = <®_vdd_cpu_gpu>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_vcc1v8>; + vcc-pd-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc1v8>; +}; + +&r_ir { + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usb2otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb3phy { + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi index af8b7d0ef7..71a45a624d 100644 --- a/arch/arm/dts/sun50i-h6.dtsi +++ b/arch/arm/dts/sun50i-h6.dtsi @@ -119,10 +119,10 @@ display_clocks: clock@0 { compatible = "allwinner,sun50i-h6-de3-clk"; reg = <0x0 0x10000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -153,6 +153,15 @@ }; }; + video-codec-g2@1c00000 { + compatible = "allwinner,sun50i-h6-vpu-g2"; + reg = <0x01c00000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_VP9>; + }; + video-codec@1c0e000 { compatible = "allwinner,sun50i-h6-video-engine"; reg = <0x01c0e000 0x2000>; @@ -271,6 +280,15 @@ }; }; + timer@3009000 { + compatible = "allwinner,sun50i-h6-timer", + "allwinner,sun8i-a23-timer"; + reg = <0x03009000 0xa0>; + interrupts = , + ; + clocks = <&osc24M>; + }; + watchdog: watchdog@30090a0 { compatible = "allwinner,sun50i-h6-wdt", "allwinner,sun6i-a31-wdt";