From patchwork Mon Feb 14 15:19:48 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 1592635 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=quicinc.com header.i=@quicinc.com header.a=rsa-sha256 header.s=qcdkim header.b=FwDsXwlt; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Jy7GX6GqRz9s5B for ; Tue, 15 Feb 2022 02:21:08 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355807AbiBNPVO (ORCPT ); Mon, 14 Feb 2022 10:21:14 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:47298 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355791AbiBNPVN (ORCPT ); Mon, 14 Feb 2022 10:21:13 -0500 Received: from alexa-out.qualcomm.com (alexa-out.qualcomm.com [129.46.98.28]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4FBC760A94; Mon, 14 Feb 2022 07:21:04 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1644852064; x=1676388064; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=/ZrpOkGvcxNekvWB0YiQP3d9M/gWLHdT6eMjqnjmv5M=; b=FwDsXwltdzHzysd+0bx9WqNVSsKcjrSZ4h/UtU+RpPB/95is9bgm1RfG 1QYZVZtD8AvwgONlo6w3hFOFyv07kirWBR7RrFqeoDZuhmxQUip1m5MrV lsHUhRwgq+g+ykmYtYOyZZSxmJqcp+ZOh3yjFDOcZZpLVSRPkwEkV0TjY E=; Received: from ironmsg08-lv.qualcomm.com ([10.47.202.152]) by alexa-out.qualcomm.com with ESMTP; 14 Feb 2022 07:21:04 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg08-lv.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Feb 2022 07:21:03 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Mon, 14 Feb 2022 07:20:23 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.922.19; Mon, 14 Feb 2022 07:20:16 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , CC: Srinivasa Rao Mandadapu , "Venkata Prasad Potturu" Subject: [PATCH v6 1/7] dt-bindings: pinctrl: qcom: Update lpass lpi file name to SoC specific Date: Mon, 14 Feb 2022 20:49:48 +0530 Message-ID: <1644851994-22732-2-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> References: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-Spam-Status: No, score=-4.4 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED,SPF_HELO_NONE, SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Change generic lpass lpi pincotrol bindings file to SoC specific file, to distinguish and accomadate other SoC specific dt bindings. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Stephen Boyd --- .../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 133 --------------------- .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 133 +++++++++++++++++++++ 2 files changed, 133 insertions(+), 133 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml deleted file mode 100644 index 5c5542f..0000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml +++ /dev/null @@ -1,133 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block - -maintainers: - - Srinivas Kandagatla - -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs - -properties: - compatible: - const: qcom,sm8250-lpass-lpi-pinctrl - - reg: - minItems: 2 - maxItems: 2 - - clocks: - items: - - description: LPASS Core voting clock - - description: LPASS Audio voting clock - - clock-names: - items: - - const: core - - const: audio - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES -patternProperties: - '-pins$': - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" - - properties: - pins: - description: - List of gpio pins affected by the properties specified in this - subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9])$" - minItems: 1 - maxItems: 14 - - function: - enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, - qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, - dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, - i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, - dmic3_data, i2s2_data ] - description: - Specify the alternative function to be configured for the specified - pins. - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - function - - additionalProperties: false - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - - clocks - - clock-names - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include - lpi_tlmm: pinctrl@33c0000 { - compatible = "qcom,sm8250-lpass-lpi-pinctrl"; - reg = <0x33c0000 0x20000>, - <0x3550000 0x10000>; - clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - clock-names = "core", "audio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&lpi_tlmm 0 0 14>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000..06efb13 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivas Kandagatla + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sm8250-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 14 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include + lpi_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm8250-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 14>; + }; From patchwork Mon Feb 14 15:19:49 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 1592639 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=quicinc.com header.i=@quicinc.com header.a=rsa-sha256 header.s=qcdkim header.b=kJl8trLo; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Jy7Gb1r7Tz9s5B for ; Tue, 15 Feb 2022 02:21:11 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355828AbiBNPVQ (ORCPT ); Mon, 14 Feb 2022 10:21:16 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:47358 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355817AbiBNPVP (ORCPT ); Mon, 14 Feb 2022 10:21:15 -0500 Received: from alexa-out-sd-01.qualcomm.com (alexa-out-sd-01.qualcomm.com [199.106.114.38]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7735960A9D; Mon, 14 Feb 2022 07:21:05 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1644852065; x=1676388065; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=8dC7sOeAzc2HklL16iWZkoTTzYHThttXe++5lhVNBIw=; b=kJl8trLo1+7vkLpl6wqQfyfWNACHyYXADW/YhDyanKQp/k9hBaIdUlE5 sYPXrCfCLXtyz4VK10kTiolEdC38HiiAPkN5mmmEKjFOgLY2avX92QFo7 gfB2alocMpc0upUy2GlZkCF5xkbYQ0LyKpBIXKRB/qw1g7K94R9CTM92Z 8=; Received: from unknown (HELO ironmsg04-sd.qualcomm.com) ([10.53.140.144]) by alexa-out-sd-01.qualcomm.com with ESMTP; 14 Feb 2022 07:21:03 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg04-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Feb 2022 07:21:01 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Mon, 14 Feb 2022 07:20:29 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.922.19; Mon, 14 Feb 2022 07:20:23 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , CC: Srinivasa Rao Mandadapu , "Venkata Prasad Potturu" Subject: [PATCH v6 2/7] dt-bindings: pinctrl: qcom: Add sc7280 lpass lpi pinctrl bindings Date: Mon, 14 Feb 2022 20:49:49 +0530 Message-ID: <1644851994-22732-3-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> References: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-Spam-Status: No, score=-4.4 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED,SPF_HELO_NONE, SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Add device tree binding Documentation details for Qualcomm SC7280 LPASS LPI pinctrl driver. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Rob Herring Reviewed-by: Stephen Boyd --- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 +++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000..d32ee32 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivasa Rao Mandadapu + - Srinivas Kandagatla + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sc7280-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 15 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; From patchwork Mon Feb 14 15:19:50 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 1592637 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=quicinc.com header.i=@quicinc.com header.a=rsa-sha256 header.s=qcdkim header.b=O31dSbLk; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Jy7GZ2Fvdz9s5B for ; Tue, 15 Feb 2022 02:21:10 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355820AbiBNPVP (ORCPT ); Mon, 14 Feb 2022 10:21:15 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:47342 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355814AbiBNPVO (ORCPT ); Mon, 14 Feb 2022 10:21:14 -0500 Received: from alexa-out-sd-01.qualcomm.com (alexa-out-sd-01.qualcomm.com [199.106.114.38]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 52CB45F8EF; Mon, 14 Feb 2022 07:21:05 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1644852065; x=1676388065; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=YZurcpWQNBUfcx5yi8Gv6PFqBA2E9U2gZNOwFZGqaFE=; b=O31dSbLkLzbmLd42Dwl4H3yBPNFiKSLWruaCnPzyH59IoN7mA4BKmIeu r6RaPDol9bhhPafQtldDRGGFOgi0vbd5ovtOQMRxjTq+mCrWazefgZiAP UGQLS9Uq4FameO3yLpzgf6NRzU5uZpy3yTMF22+6kmrW65EG/x4PWCshc E=; Received: from unknown (HELO ironmsg04-sd.qualcomm.com) ([10.53.140.144]) by alexa-out-sd-01.qualcomm.com with ESMTP; 14 Feb 2022 07:21:03 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg04-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Feb 2022 07:21:02 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Mon, 14 Feb 2022 07:20:35 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.922.19; Mon, 14 Feb 2022 07:20:29 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , CC: Srinivasa Rao Mandadapu , "Venkata Prasad Potturu" Subject: [PATCH v6 3/7] pinctrl: qcom: Update macro name to LPI specific Date: Mon, 14 Feb 2022 20:49:50 +0530 Message-ID: <1644851994-22732-4-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> References: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-Spam-Status: No, score=-4.4 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED,SPF_HELO_NONE, SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Stephen Boyd --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 2f19ab4..3c15f80 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -40,7 +40,7 @@ #define LPI_GPIO_KEEPER 0x2 #define LPI_GPIO_PULL_UP 0x3 #define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) -#define NO_SLEW -1 +#define LPI_NO_SLEW -1 #define LPI_FUNCTION(fname) \ [LPI_MUX_##fname] = { \ @@ -193,14 +193,14 @@ static const struct lpi_pingroup sm8250_groups[] = { LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), - LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), - LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), - LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), - LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), - LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), - LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), }; static const struct lpi_function sm8250_functions[] = { @@ -435,7 +435,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group, } slew_offset = g->slew_offset; - if (slew_offset == NO_SLEW) + if (slew_offset == LPI_NO_SLEW) break; mutex_lock(&pctrl->slew_access_lock); From patchwork Mon Feb 14 15:19:51 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 1592634 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=quicinc.com header.i=@quicinc.com header.a=rsa-sha256 header.s=qcdkim header.b=wUCTtgox; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Jy7GW5sBJz9s5B for ; Tue, 15 Feb 2022 02:21:07 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355795AbiBNPVN (ORCPT ); Mon, 14 Feb 2022 10:21:13 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:47238 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355797AbiBNPVM (ORCPT ); Mon, 14 Feb 2022 10:21:12 -0500 Received: from alexa-out-sd-01.qualcomm.com (alexa-out-sd-01.qualcomm.com [199.106.114.38]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DEBCF606FD; Mon, 14 Feb 2022 07:21:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1644852063; x=1676388063; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=uHYs5i5tsOn7AC9eTjApEogxg8S/6QrNxF6kUCTkTSE=; b=wUCTtgoxLRz7NIeb88IBA+2O0Fc0LDzBbOYXq8HhNjV/+R0PwKJHyZ39 hPmbhWSDew3ibDxdMu0u5uDo/tnU6oaNyl7xWwgEhRgTixjF1cARnvDKI o8HoRxkS5W6uoYgYfUDSnqty0RQd+TQSL030HrTVfOhlPd279tIFWwt3K k=; Received: from unknown (HELO ironmsg04-sd.qualcomm.com) ([10.53.140.144]) by alexa-out-sd-01.qualcomm.com with ESMTP; 14 Feb 2022 07:21:03 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg04-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Feb 2022 07:21:02 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Mon, 14 Feb 2022 07:20:42 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.922.19; Mon, 14 Feb 2022 07:20:35 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , CC: Srinivasa Rao Mandadapu , "Venkata Prasad Potturu" Subject: [PATCH v6 4/7] pinctrl: qcom: Update lpi pin group structure Date: Mon, 14 Feb 2022 20:49:51 +0530 Message-ID: <1644851994-22732-5-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> References: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-Spam-Status: No, score=-4.4 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED,SPF_HELO_NONE, SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Update lpi group structure with core group_desc structure to avoid redundant struct params. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 44 +++++++++++++++----------------- 1 file changed, 21 insertions(+), 23 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 3c15f80..54750ba 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -51,11 +51,11 @@ #define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ { \ - .name = "gpio" #id, \ - .pins = gpio##id##_pins, \ + .group.name = "gpio" #id, \ + .group.pins = gpio##id##_pins, \ .pin = id, \ .slew_offset = soff, \ - .npins = ARRAY_SIZE(gpio##id##_pins), \ + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ .funcs = (int[]){ \ LPI_MUX_gpio, \ LPI_MUX_##f1, \ @@ -67,9 +67,7 @@ } struct lpi_pingroup { - const char *name; - const unsigned int *pins; - unsigned int npins; + struct group_desc group; unsigned int pin; /* Bit offset in slew register for SoundWire pins only */ int slew_offset; @@ -150,20 +148,20 @@ enum sm8250_lpi_functions { LPI_MUX__, }; -static const unsigned int gpio0_pins[] = { 0 }; -static const unsigned int gpio1_pins[] = { 1 }; -static const unsigned int gpio2_pins[] = { 2 }; -static const unsigned int gpio3_pins[] = { 3 }; -static const unsigned int gpio4_pins[] = { 4 }; -static const unsigned int gpio5_pins[] = { 5 }; -static const unsigned int gpio6_pins[] = { 6 }; -static const unsigned int gpio7_pins[] = { 7 }; -static const unsigned int gpio8_pins[] = { 8 }; -static const unsigned int gpio9_pins[] = { 9 }; -static const unsigned int gpio10_pins[] = { 10 }; -static const unsigned int gpio11_pins[] = { 11 }; -static const unsigned int gpio12_pins[] = { 12 }; -static const unsigned int gpio13_pins[] = { 13 }; +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; static const char * const swr_tx_clk_groups[] = { "gpio0" }; static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; static const char * const swr_rx_clk_groups[] = { "gpio3" }; @@ -262,7 +260,7 @@ static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev, { struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - return pctrl->data->groups[group].name; + return pctrl->data->groups[group].group.name; } static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, @@ -272,8 +270,8 @@ static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, { struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - *pins = pctrl->data->groups[group].pins; - *num_pins = pctrl->data->groups[group].npins; + *pins = pctrl->data->groups[group].group.pins; + *num_pins = pctrl->data->groups[group].group.num_pins; return 0; } From patchwork Mon Feb 14 15:19:52 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 1592642 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=quicinc.com header.i=@quicinc.com header.a=rsa-sha256 header.s=qcdkim header.b=MvU8TDGk; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Jy7Gx3SMfz9s5B for ; Tue, 15 Feb 2022 02:21:29 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355887AbiBNPVc (ORCPT ); Mon, 14 Feb 2022 10:21:32 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:47504 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355845AbiBNPVS (ORCPT ); Mon, 14 Feb 2022 10:21:18 -0500 Received: from alexa-out.qualcomm.com (alexa-out.qualcomm.com [129.46.98.28]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C87B560A9F; Mon, 14 Feb 2022 07:21:08 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1644852069; x=1676388069; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=ULs0n2ZjS/XCVQI06n1asUQd/pYDX/gCV7cPUSA/eME=; b=MvU8TDGkyjvWFqAYA01mbayfyCz80R+6QhjBAbfEUkX9r/QeE3z0D4SI 9pS3fbLEtuEDAZoSXb1vo5EbDfL5bXH6ZP9pVOCUFIfFiAQhChLv3g3nw CdXu/3zXgTKv0WC7jPACGbqqyx2fmL3+bYDoiAjZevC8MlA/ESk4M7IRO k=; Received: from ironmsg08-lv.qualcomm.com ([10.47.202.152]) by alexa-out.qualcomm.com with ESMTP; 14 Feb 2022 07:21:04 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg08-lv.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Feb 2022 07:21:03 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Mon, 14 Feb 2022 07:20:49 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.922.19; Mon, 14 Feb 2022 07:20:42 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , CC: Srinivasa Rao Mandadapu , "Venkata Prasad Potturu" Subject: [PATCH v6 5/7] pinctrl: qcom: Extract chip specific LPASS LPI code Date: Mon, 14 Feb 2022 20:49:52 +0530 Message-ID: <1644851994-22732-6-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> References: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-Spam-Status: No, score=-4.4 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED,SPF_HELO_NONE, SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver to allow reusing the common code in the addition of subsequent platforms. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu --- drivers/pinctrl/qcom/Kconfig | 8 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 233 +----------------------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 86 +++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 166 +++++++++++++++++ 5 files changed, 266 insertions(+), 228 deletions(-) create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index ca6f68a..8871451 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -357,4 +357,12 @@ config PINCTRL_LPASS_LPI Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI (Low Power Island) found on the Qualcomm Technologies Inc SoCs. +config PINCTRL_SM8250_LPASS_LPI + tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver" + depends on PINCTRL_LPASS_LPI + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI + (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform. + endif diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 709882f..c10d14d2 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -41,3 +41,4 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o +obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 54750ba..8a82fd9 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -4,91 +4,15 @@ * Copyright (c) 2020 Linaro Ltd. */ -#include -#include #include #include -#include #include #include -#include #include #include #include -#include -#include -#include -#include "../core.h" #include "../pinctrl-utils.h" - -#define LPI_SLEW_RATE_CTL_REG 0xa000 -#define LPI_TLMM_REG_OFFSET 0x1000 -#define LPI_SLEW_RATE_MAX 0x03 -#define LPI_SLEW_BITS_SIZE 0x02 -#define LPI_SLEW_RATE_MASK GENMASK(1, 0) -#define LPI_GPIO_CFG_REG 0x00 -#define LPI_GPIO_PULL_MASK GENMASK(1, 0) -#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) -#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) -#define LPI_GPIO_OE_MASK BIT(9) -#define LPI_GPIO_VALUE_REG 0x04 -#define LPI_GPIO_VALUE_IN_MASK BIT(0) -#define LPI_GPIO_VALUE_OUT_MASK BIT(1) - -#define LPI_GPIO_BIAS_DISABLE 0x0 -#define LPI_GPIO_PULL_DOWN 0x1 -#define LPI_GPIO_KEEPER 0x2 -#define LPI_GPIO_PULL_UP 0x3 -#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) -#define LPI_NO_SLEW -1 - -#define LPI_FUNCTION(fname) \ - [LPI_MUX_##fname] = { \ - .name = #fname, \ - .groups = fname##_groups, \ - .ngroups = ARRAY_SIZE(fname##_groups), \ - } - -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ - { \ - .group.name = "gpio" #id, \ - .group.pins = gpio##id##_pins, \ - .pin = id, \ - .slew_offset = soff, \ - .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ - .funcs = (int[]){ \ - LPI_MUX_gpio, \ - LPI_MUX_##f1, \ - LPI_MUX_##f2, \ - LPI_MUX_##f3, \ - LPI_MUX_##f4, \ - }, \ - .nfuncs = 5, \ - } - -struct lpi_pingroup { - struct group_desc group; - unsigned int pin; - /* Bit offset in slew register for SoundWire pins only */ - int slew_offset; - unsigned int *funcs; - unsigned int nfuncs; -}; - -struct lpi_function { - const char *name; - const char * const *groups; - unsigned int ngroups; -}; - -struct lpi_pinctrl_variant_data { - const struct pinctrl_pin_desc *pins; - int npins; - const struct lpi_pingroup *groups; - int ngroups; - const struct lpi_function *functions; - int nfunctions; -}; +#include "pinctrl-lpass-lpi.h" #define MAX_LPI_NUM_CLKS 2 @@ -104,136 +28,6 @@ struct lpi_pinctrl { const struct lpi_pinctrl_variant_data *data; }; -/* sm8250 variant specific data */ -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { - PINCTRL_PIN(0, "gpio0"), - PINCTRL_PIN(1, "gpio1"), - PINCTRL_PIN(2, "gpio2"), - PINCTRL_PIN(3, "gpio3"), - PINCTRL_PIN(4, "gpio4"), - PINCTRL_PIN(5, "gpio5"), - PINCTRL_PIN(6, "gpio6"), - PINCTRL_PIN(7, "gpio7"), - PINCTRL_PIN(8, "gpio8"), - PINCTRL_PIN(9, "gpio9"), - PINCTRL_PIN(10, "gpio10"), - PINCTRL_PIN(11, "gpio11"), - PINCTRL_PIN(12, "gpio12"), - PINCTRL_PIN(13, "gpio13"), -}; - -enum sm8250_lpi_functions { - LPI_MUX_dmic1_clk, - LPI_MUX_dmic1_data, - LPI_MUX_dmic2_clk, - LPI_MUX_dmic2_data, - LPI_MUX_dmic3_clk, - LPI_MUX_dmic3_data, - LPI_MUX_i2s1_clk, - LPI_MUX_i2s1_data, - LPI_MUX_i2s1_ws, - LPI_MUX_i2s2_clk, - LPI_MUX_i2s2_data, - LPI_MUX_i2s2_ws, - LPI_MUX_qua_mi2s_data, - LPI_MUX_qua_mi2s_sclk, - LPI_MUX_qua_mi2s_ws, - LPI_MUX_swr_rx_clk, - LPI_MUX_swr_rx_data, - LPI_MUX_swr_tx_clk, - LPI_MUX_swr_tx_data, - LPI_MUX_wsa_swr_clk, - LPI_MUX_wsa_swr_data, - LPI_MUX_gpio, - LPI_MUX__, -}; - -static int gpio0_pins[] = { 0 }; -static int gpio1_pins[] = { 1 }; -static int gpio2_pins[] = { 2 }; -static int gpio3_pins[] = { 3 }; -static int gpio4_pins[] = { 4 }; -static int gpio5_pins[] = { 5 }; -static int gpio6_pins[] = { 6 }; -static int gpio7_pins[] = { 7 }; -static int gpio8_pins[] = { 8 }; -static int gpio9_pins[] = { 9 }; -static int gpio10_pins[] = { 10 }; -static int gpio11_pins[] = { 11 }; -static int gpio12_pins[] = { 12 }; -static int gpio13_pins[] = { 13 }; -static const char * const swr_tx_clk_groups[] = { "gpio0" }; -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; -static const char * const swr_rx_clk_groups[] = { "gpio3" }; -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; -static const char * const dmic1_clk_groups[] = { "gpio6" }; -static const char * const dmic1_data_groups[] = { "gpio7" }; -static const char * const dmic2_clk_groups[] = { "gpio8" }; -static const char * const dmic2_data_groups[] = { "gpio9" }; -static const char * const i2s2_clk_groups[] = { "gpio10" }; -static const char * const i2s2_ws_groups[] = { "gpio11" }; -static const char * const dmic3_clk_groups[] = { "gpio12" }; -static const char * const dmic3_data_groups[] = { "gpio13" }; -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; -static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; -static const char * const i2s1_clk_groups[] = { "gpio6" }; -static const char * const i2s1_ws_groups[] = { "gpio7" }; -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; -static const char * const wsa_swr_clk_groups[] = { "gpio10" }; -static const char * const wsa_swr_data_groups[] = { "gpio11" }; -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; - -static const struct lpi_pingroup sm8250_groups[] = { - LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), - LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), - LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), - LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), - LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), - LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), - LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), - LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), - LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), - LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), - LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), - LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), -}; - -static const struct lpi_function sm8250_functions[] = { - LPI_FUNCTION(dmic1_clk), - LPI_FUNCTION(dmic1_data), - LPI_FUNCTION(dmic2_clk), - LPI_FUNCTION(dmic2_data), - LPI_FUNCTION(dmic3_clk), - LPI_FUNCTION(dmic3_data), - LPI_FUNCTION(i2s1_clk), - LPI_FUNCTION(i2s1_data), - LPI_FUNCTION(i2s1_ws), - LPI_FUNCTION(i2s2_clk), - LPI_FUNCTION(i2s2_data), - LPI_FUNCTION(i2s2_ws), - LPI_FUNCTION(qua_mi2s_data), - LPI_FUNCTION(qua_mi2s_sclk), - LPI_FUNCTION(qua_mi2s_ws), - LPI_FUNCTION(swr_rx_clk), - LPI_FUNCTION(swr_rx_data), - LPI_FUNCTION(swr_tx_clk), - LPI_FUNCTION(swr_tx_data), - LPI_FUNCTION(wsa_swr_clk), - LPI_FUNCTION(wsa_swr_data), -}; - -static struct lpi_pinctrl_variant_data sm8250_lpi_data = { - .pins = sm8250_lpi_pins, - .npins = ARRAY_SIZE(sm8250_lpi_pins), - .groups = sm8250_groups, - .ngroups = ARRAY_SIZE(sm8250_groups), - .functions = sm8250_functions, - .nfunctions = ARRAY_SIZE(sm8250_functions), -}; - static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin, unsigned int addr) { @@ -580,7 +374,7 @@ static const struct gpio_chip lpi_gpio_template = { .dbg_show = lpi_gpio_dbg_show, }; -static int lpi_pinctrl_probe(struct platform_device *pdev) +int lpi_pinctrl_probe(struct platform_device *pdev) { const struct lpi_pinctrl_variant_data *data; struct device *dev = &pdev->dev; @@ -659,8 +453,9 @@ static int lpi_pinctrl_probe(struct platform_device *pdev) return ret; } +EXPORT_SYMBOL(lpi_pinctrl_probe); -static int lpi_pinctrl_remove(struct platform_device *pdev) +int lpi_pinctrl_remove(struct platform_device *pdev) { struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev); @@ -669,25 +464,7 @@ static int lpi_pinctrl_remove(struct platform_device *pdev) return 0; } +EXPORT_SYMBOL(lpi_pinctrl_remove); -static const struct of_device_id lpi_pinctrl_of_match[] = { - { - .compatible = "qcom,sm8250-lpass-lpi-pinctrl", - .data = &sm8250_lpi_data, - }, - { } -}; -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); - -static struct platform_driver lpi_pinctrl_driver = { - .driver = { - .name = "qcom-lpass-lpi-pinctrl", - .of_match_table = lpi_pinctrl_of_match, - }, - .probe = lpi_pinctrl_probe, - .remove = lpi_pinctrl_remove, -}; - -module_platform_driver(lpi_pinctrl_driver); MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h new file mode 100644 index 0000000..a511d72 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ +#ifndef __PINCTRL_LPASS_LPI_H__ +#define __PINCTRL_LPASS_LPI_H__ + +#include +#include +#include "../core.h" + +#define LPI_SLEW_RATE_CTL_REG 0xa000 +#define LPI_TLMM_REG_OFFSET 0x1000 +#define LPI_SLEW_RATE_MAX 0x03 +#define LPI_SLEW_BITS_SIZE 0x02 +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) +#define LPI_GPIO_CFG_REG 0x00 +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) +#define LPI_GPIO_OE_MASK BIT(9) +#define LPI_GPIO_VALUE_REG 0x04 +#define LPI_GPIO_VALUE_IN_MASK BIT(0) +#define LPI_GPIO_VALUE_OUT_MASK BIT(1) + +#define LPI_GPIO_BIAS_DISABLE 0x0 +#define LPI_GPIO_PULL_DOWN 0x1 +#define LPI_GPIO_KEEPER 0x2 +#define LPI_GPIO_PULL_UP 0x3 +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) +#define LPI_NO_SLEW -1 + +#define LPI_FUNCTION(fname) \ + [LPI_MUX_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ + { \ + .group.name = "gpio" #id, \ + .group.pins = gpio##id##_pins, \ + .pin = id, \ + .slew_offset = soff, \ + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + LPI_MUX_gpio, \ + LPI_MUX_##f1, \ + LPI_MUX_##f2, \ + LPI_MUX_##f3, \ + LPI_MUX_##f4, \ + }, \ + .nfuncs = 5, \ + } + +struct lpi_pingroup { + struct group_desc group; + unsigned int pin; + /* Bit offset in slew register for SoundWire pins only */ + int slew_offset; + unsigned int *funcs; + unsigned int nfuncs; +}; + +struct lpi_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +struct lpi_pinctrl_variant_data { + const struct pinctrl_pin_desc *pins; + int npins; + const struct lpi_pingroup *groups; + int ngroups; + const struct lpi_function *functions; + int nfunctions; +}; + +int lpi_pinctrl_probe(struct platform_device *pdev); +int lpi_pinctrl_remove(struct platform_device *pdev); + +#endif /*__PINCTRL_LPASS_LPI_H__*/ + diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c new file mode 100644 index 0000000..27e358e --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ + +#include +#include +#include +#include + +#include "pinctrl-lpass-lpi.h" + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; + + +/* sm8250 variant specific data */ +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; + +static const struct lpi_pingroup sm8250_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), +}; + +static const struct lpi_function sm8250_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static struct lpi_pinctrl_variant_data sm8250_lpi_data = { + .pins = sm8250_lpi_pins, + .npins = ARRAY_SIZE(sm8250_lpi_pins), + .groups = sm8250_groups, + .ngroups = ARRAY_SIZE(sm8250_groups), + .functions = sm8250_functions, + .nfunctions = ARRAY_SIZE(sm8250_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sm8250-lpass-lpi-pinctrl", + .data = &sm8250_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sm8250-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI SM8250 LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); From patchwork Mon Feb 14 15:19:53 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 1592640 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=quicinc.com header.i=@quicinc.com header.a=rsa-sha256 header.s=qcdkim header.b=CYzt25t2; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Jy7Gd3phdz9s5B for ; Tue, 15 Feb 2022 02:21:13 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355833AbiBNPVR (ORCPT ); Mon, 14 Feb 2022 10:21:17 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:47284 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355816AbiBNPVQ (ORCPT ); Mon, 14 Feb 2022 10:21:16 -0500 Received: from alexa-out.qualcomm.com (alexa-out.qualcomm.com [129.46.98.28]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AF8335F8E8; Mon, 14 Feb 2022 07:21:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1644852067; x=1676388067; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=vhW9eo5gAnUGaEE59V2pr2JT/IFsF2HOGQKPfftwVRk=; b=CYzt25t2rNV0FMGg8UapwMHcBTnXNcmdPWRPT8sPym8B0pxKW5vxmUU5 xBn6uh84QsiiJxFpbMBuI1E8U566QX4Mp4Uh0TLDXGazfY9CzjWwcf8+W AQ74S4EK/yAJqcOGU0GhzOiu9WdE6i2DakWJZSf1NlffMi650TYvd8jnB g=; Received: from ironmsg08-lv.qualcomm.com ([10.47.202.152]) by alexa-out.qualcomm.com with ESMTP; 14 Feb 2022 07:21:04 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg08-lv.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Feb 2022 07:21:03 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Mon, 14 Feb 2022 07:20:55 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.922.19; Mon, 14 Feb 2022 07:20:49 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , CC: Srinivasa Rao Mandadapu , "Venkata Prasad Potturu" Subject: [PATCH v6 6/7] pinctrl: qcom: Add SC7280 lpass pin configuration Date: Mon, 14 Feb 2022 20:49:53 +0530 Message-ID: <1644851994-22732-7-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> References: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-Spam-Status: No, score=-4.4 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED,SPF_HELO_NONE, SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Add pin control support for SC7280 LPASS LPI. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu --- drivers/pinctrl/qcom/Kconfig | 8 ++ drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 169 ++++++++++++++++++++++++ 3 files changed, 178 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 8871451..e30c7d2 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -357,6 +357,14 @@ config PINCTRL_LPASS_LPI Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI (Low Power Island) found on the Qualcomm Technologies Inc SoCs. +config PINCTRL_SC7280_LPASS_LPI + tristate "Qualcomm Technologies Inc SC7280 LPASS LPI pin controller driver" + depends on PINCTRL_LPASS_LPI + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI + (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform. + config PINCTRL_SM8250_LPASS_LPI tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver" depends on PINCTRL_LPASS_LPI diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index c10d14d2..a008ee0 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -41,4 +41,5 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o +obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c new file mode 100644 index 0000000..5bf30d97 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + * ALSA SoC platform-machine driver for QTi LPASS + */ + +#include +#include +#include +#include + +#include "pinctrl-lpass-lpi.h" + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; +static int gpio14_pins[] = { 14 }; + +/* sc7280 variant specific data */ +static const struct pinctrl_pin_desc sc7280_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio13" }; + +static const struct lpi_pingroup sc7280_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_rx_data, _, _, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), + LPI_PINGROUP(14, 6, swr_tx_data, _, _, _), +}; + +static const struct lpi_function sc7280_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static const struct lpi_pinctrl_variant_data sc7280_lpi_data = { + .pins = sc7280_lpi_pins, + .npins = ARRAY_SIZE(sc7280_lpi_pins), + .groups = sc7280_groups, + .ngroups = ARRAY_SIZE(sc7280_groups), + .functions = sc7280_functions, + .nfunctions = ARRAY_SIZE(sc7280_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sc7280-lpass-lpi-pinctrl", + .data = &sc7280_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sc7280-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI SC7280 LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); + From patchwork Mon Feb 14 15:19:54 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 1592641 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=quicinc.com header.i=@quicinc.com header.a=rsa-sha256 header.s=qcdkim header.b=TpejtfHt; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4Jy7Gf2KYwz9s5B for ; Tue, 15 Feb 2022 02:21:14 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355841AbiBNPVS (ORCPT ); Mon, 14 Feb 2022 10:21:18 -0500 Received: from mxb-00190b01.gslb.pphosted.com ([23.128.96.19]:47400 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355824AbiBNPVP (ORCPT ); Mon, 14 Feb 2022 10:21:15 -0500 Received: from alexa-out.qualcomm.com (alexa-out.qualcomm.com [129.46.98.28]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8C00A5FF17; Mon, 14 Feb 2022 07:21:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1644852067; x=1676388067; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=AU3uQcQQWx80aPisgsDkLm+OSyKiTNcp/6a1avTOP4E=; b=TpejtfHtjiM4LrMLq4zdJqPoOL546wZOLYPTorQ1sRiM70scKx/5eK/L CEVFx5e7qcjC3MUhfogT0JLnhL82LA7yAHSCVr7X7iHqlXRVAid8fsStw w+GY5SYAGiFDQkXHR4yFarkBxC5Ypcn3e8hUT4sP3qIMEjRXER2Y44M6/ g=; Received: from ironmsg08-lv.qualcomm.com ([10.47.202.152]) by alexa-out.qualcomm.com with ESMTP; 14 Feb 2022 07:21:04 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg08-lv.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 14 Feb 2022 07:21:03 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Mon, 14 Feb 2022 07:21:02 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.922.19; Mon, 14 Feb 2022 07:20:55 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , CC: Srinivasa Rao Mandadapu , "Venkata Prasad Potturu" Subject: [PATCH v6 7/7] pinctrl: qcom: Update clock voting as optional Date: Mon, 14 Feb 2022 20:49:54 +0530 Message-ID: <1644851994-22732-8-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> References: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-Spam-Status: No, score=-4.4 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_MED,SPF_HELO_NONE, SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Update bulk clock voting to optional voting as ADSP bypass platform doesn't need macro and decodec clocks, these are maintained as power domains and operated from lpass audio core cc. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 16 +++++++++------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 1 + drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 1 + 3 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 8a82fd9..103f0a6c 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -407,13 +407,15 @@ int lpi_pinctrl_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(pctrl->slew_base), "Slew resource not provided\n"); - ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks); - if (ret) - return dev_err_probe(dev, ret, "Can't get clocks\n"); - - ret = clk_bulk_prepare_enable(MAX_LPI_NUM_CLKS, pctrl->clks); - if (ret) - return dev_err_probe(dev, ret, "Can't enable clocks\n"); + if (!data->is_clk_optional) { + ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks); + if (ret) + return dev_err_probe(dev, ret, "Can't get clocks\n"); + + ret = clk_bulk_prepare_enable(MAX_LPI_NUM_CLKS, pctrl->clks); + if (ret) + return dev_err_probe(dev, ret, "Can't enable clocks\n"); + } pctrl->desc.pctlops = &lpi_gpio_pinctrl_ops; pctrl->desc.pmxops = &lpi_gpio_pinmux_ops; diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h index a511d72..c1079bf 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -77,6 +77,7 @@ struct lpi_pinctrl_variant_data { int ngroups; const struct lpi_function *functions; int nfunctions; + int is_clk_optional; }; int lpi_pinctrl_probe(struct platform_device *pdev); diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c index 5bf30d97..4277e31 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c @@ -143,6 +143,7 @@ static const struct lpi_pinctrl_variant_data sc7280_lpi_data = { .ngroups = ARRAY_SIZE(sc7280_groups), .functions = sc7280_functions, .nfunctions = ARRAY_SIZE(sc7280_functions), + .is_clk_optional = 1, }; static const struct of_device_id lpi_pinctrl_of_match[] = {