From patchwork Wed Aug 25 06:07:20 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?6ZmI5Y2O5omN?= X-Patchwork-Id: 1520530 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GvbBX0gqCz9sPf for ; Wed, 25 Aug 2021 16:08:20 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237913AbhHYGJE (ORCPT ); Wed, 25 Aug 2021 02:09:04 -0400 Received: from mail.kernel.org ([198.145.29.99]:44370 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232442AbhHYGJE (ORCPT ); Wed, 25 Aug 2021 02:09:04 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id CFA89613A7; Wed, 25 Aug 2021 06:08:16 +0000 (UTC) From: Huacai Chen To: Bjorn Helgaas Cc: linux-pci@vger.kernel.org, Xuefeng Li , Huacai Chen , Jiaxun Yang , Huacai Chen Subject: [PATCH V8 1/5] PCI: loongson: Use correct pci config access operations Date: Wed, 25 Aug 2021 14:07:20 +0800 Message-Id: <20210825060724.3385929-2-chenhuacai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210825060724.3385929-1-chenhuacai@loongson.cn> References: <20210825060724.3385929-1-chenhuacai@loongson.cn> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org LS2K/LS7A support 8/16/32-bits pci config access operations via CFG1, so we can disable CFG0 for them and safely use pci_generic_config_read()/ pci_generic_config_write() instead of pci_generic_config_read32()/pci_ generic_config_write32(). Signed-off-by: Huacai Chen --- drivers/pci/controller/pci-loongson.c | 36 +++++++++++++++++---------- 1 file changed, 23 insertions(+), 13 deletions(-) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 48169b1e3817..b2c81c762599 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -159,8 +159,15 @@ static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return val; } -/* H/w only accept 32-bit PCI operations */ +/* LS2K/LS7A accept 8/16/32-bit PCI operations */ static struct pci_ops loongson_pci_ops = { + .map_bus = pci_loongson_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, +}; + +/* RS780/SR5690 only accept 32-bit PCI operations */ +static struct pci_ops loongson_pci_ops32 = { .map_bus = pci_loongson_map_bus, .read = pci_generic_config_read32, .write = pci_generic_config_write32, @@ -168,9 +175,9 @@ static struct pci_ops loongson_pci_ops = { static const struct of_device_id loongson_pci_of_match[] = { { .compatible = "loongson,ls2k-pci", - .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + .data = (void *)(FLAG_CFG1 | FLAG_DEV_FIX), }, { .compatible = "loongson,ls7a-pci", - .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + .data = (void *)(FLAG_CFG1 | FLAG_DEV_FIX), }, { .compatible = "loongson,rs780e-pci", .data = (void *)(FLAG_CFG0), }, {} @@ -195,17 +202,17 @@ static int loongson_pci_probe(struct platform_device *pdev) priv->pdev = pdev; priv->flags = (unsigned long)of_device_get_match_data(dev); - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_err(dev, "missing mem resources for cfg0\n"); - return -EINVAL; + if (priv->flags & FLAG_CFG0) { + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + dev_err(dev, "missing mem resources for cfg0\n"); + else { + priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs); + if (IS_ERR(priv->cfg0_base)) + return PTR_ERR(priv->cfg0_base); + } } - priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs); - if (IS_ERR(priv->cfg0_base)) - return PTR_ERR(priv->cfg0_base); - - /* CFG1 is optional */ if (priv->flags & FLAG_CFG1) { regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!regs) @@ -218,8 +225,11 @@ static int loongson_pci_probe(struct platform_device *pdev) } bridge->sysdata = priv; - bridge->ops = &loongson_pci_ops; bridge->map_irq = loongson_map_irq; + if (!of_device_is_compatible(node, "loongson,rs780e-pci")) + bridge->ops = &loongson_pci_ops; + else + bridge->ops = &loongson_pci_ops32; return pci_host_probe(bridge); } From patchwork Wed Aug 25 06:07:21 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?6ZmI5Y2O5omN?= X-Patchwork-Id: 1520531 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GvbCC2QGyz9sPf for ; Wed, 25 Aug 2021 16:08:55 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232442AbhHYGJj (ORCPT ); Wed, 25 Aug 2021 02:09:39 -0400 Received: from mail.kernel.org ([198.145.29.99]:44710 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238172AbhHYGJj (ORCPT ); Wed, 25 Aug 2021 02:09:39 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id E0539613AB; Wed, 25 Aug 2021 06:08:51 +0000 (UTC) From: Huacai Chen To: Bjorn Helgaas Cc: linux-pci@vger.kernel.org, Xuefeng Li , Huacai Chen , Jiaxun Yang , Huacai Chen Subject: [PATCH V8 2/5] PCI: loongson: Add ACPI init support Date: Wed, 25 Aug 2021 14:07:21 +0800 Message-Id: <20210825060724.3385929-3-chenhuacai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210825060724.3385929-1-chenhuacai@loongson.cn> References: <20210825060724.3385929-1-chenhuacai@loongson.cn> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Loongson PCH (LS7A chipset) will be used by both MIPS-based and LoongArch-based Loongson processors. MIPS-based Loongson uses FDT while LoongArch-base Loongson uses ACPI, this patch add ACPI init support for the driver in drivers/pci/controller/pci-loongson.c because it is currently FDT-only. LoongArch is a new RISC ISA, mainline support will come soon, and documentations are here (in translation): https://github.com/loongson/LoongArch-Documentation Signed-off-by: Huacai Chen --- drivers/acpi/pci_mcfg.c | 13 +++++++ drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pci-loongson.c | 54 ++++++++++++++++++++++++++- include/linux/pci-ecam.h | 1 + 4 files changed, 67 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c index 53cab975f612..860014b89b8e 100644 --- a/drivers/acpi/pci_mcfg.c +++ b/drivers/acpi/pci_mcfg.c @@ -41,6 +41,8 @@ struct mcfg_fixup { static struct mcfg_fixup mcfg_quirks[] = { /* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */ +#ifdef CONFIG_ARM64 + #define AL_ECAM(table_id, rev, seg, ops) \ { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops } @@ -169,6 +171,17 @@ static struct mcfg_fixup mcfg_quirks[] = { ALTRA_ECAM_QUIRK(1, 13), ALTRA_ECAM_QUIRK(1, 14), ALTRA_ECAM_QUIRK(1, 15), +#endif /* ARM64 */ + +#ifdef CONFIG_LOONGARCH +#define LOONGSON_ECAM_MCFG(table_id, seg) \ + { "LOONGS", table_id, 1, seg, MCFG_BUS_ANY, &loongson_pci_ecam_ops } + + LOONGSON_ECAM_MCFG("\0", 0), + LOONGSON_ECAM_MCFG("LOONGSON", 0), + LOONGSON_ECAM_MCFG("\0", 1), + LOONGSON_ECAM_MCFG("LOONGSON", 1), +#endif /* LOONGARCH */ }; static char mcfg_oem_id[ACPI_OEM_ID_SIZE]; diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 5e1e3796efa4..77aa7272425c 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -287,7 +287,7 @@ config PCI_HYPERV_INTERFACE config PCI_LOONGSON bool "LOONGSON PCI Controller" depends on MACH_LOONGSON64 || COMPILE_TEST - depends on OF + depends on OF || ACPI depends on PCI_QUIRKS default MACH_LOONGSON64 help diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index b2c81c762599..81361a056377 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -9,6 +9,8 @@ #include #include #include +#include +#include #include "../pci.h" @@ -92,6 +94,18 @@ static void loongson_mrrs_quirk(struct pci_dev *dev) } DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); +static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) +{ + struct pci_config_window *cfg; + + if (acpi_disabled) + return (struct loongson_pci *)(bus->sysdata); + else { + cfg = bus->sysdata; + return (struct loongson_pci *)(cfg->priv); + } +} + static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, unsigned int devfn, int where) { @@ -119,8 +133,10 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devf int where) { unsigned char busnum = bus->number; - struct pci_host_bridge *bridge = pci_find_host_bridge(bus); - struct loongson_pci *priv = pci_host_bridge_priv(bridge); + struct loongson_pci *priv = pci_bus_to_loongson_pci(bus); + + if (pci_is_root_bus(bus)) + busnum = 0; /* * Do not read more than one device on the bus other than @@ -141,6 +157,8 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devf return NULL; } +#ifdef CONFIG_OF + static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -242,3 +260,35 @@ static struct platform_driver loongson_pci_driver = { .probe = loongson_pci_probe, }; builtin_platform_driver(loongson_pci_driver); + +#endif + +#ifdef CONFIG_ACPI + +static int loongson_pci_ecam_init(struct pci_config_window *cfg) +{ + struct device *dev = cfg->parent; + struct loongson_pci *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + cfg->priv = priv; + priv->flags = FLAG_CFG1 | FLAG_DEV_FIX, + priv->cfg1_base = cfg->win - (cfg->busr.start << 16); + + return 0; +} + +const struct pci_ecam_ops loongson_pci_ecam_ops = { + .bus_shift = 16, + .init = loongson_pci_ecam_init, + .pci_ops = { + .map_bus = pci_loongson_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, + } +}; + +#endif diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h index adea5a4771cf..6b1301e2498e 100644 --- a/include/linux/pci-ecam.h +++ b/include/linux/pci-ecam.h @@ -87,6 +87,7 @@ extern const struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 * extern const struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */ extern const struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */ extern const struct pci_ecam_ops tegra194_pcie_ops; /* Tegra194 PCIe */ +extern const struct pci_ecam_ops loongson_pci_ecam_ops; /* Loongson PCIe */ #endif #if IS_ENABLED(CONFIG_PCI_HOST_COMMON) From patchwork Wed Aug 25 06:07:22 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?6ZmI5Y2O5omN?= X-Patchwork-Id: 1520532 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GvbDt6CkDz9sR4 for ; Wed, 25 Aug 2021 16:10:22 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238197AbhHYGLH (ORCPT ); Wed, 25 Aug 2021 02:11:07 -0400 Received: from mail.kernel.org ([198.145.29.99]:45348 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237908AbhHYGLG (ORCPT ); Wed, 25 Aug 2021 02:11:06 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id 59011613A7; Wed, 25 Aug 2021 06:10:19 +0000 (UTC) From: Huacai Chen To: Bjorn Helgaas Cc: linux-pci@vger.kernel.org, Xuefeng Li , Huacai Chen , Jiaxun Yang , Huacai Chen Subject: [PATCH V8 3/5] PCI: Improve the MRRS quirk for LS7A Date: Wed, 25 Aug 2021 14:07:22 +0800 Message-Id: <20210825060724.3385929-4-chenhuacai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210825060724.3385929-1-chenhuacai@loongson.cn> References: <20210825060724.3385929-1-chenhuacai@loongson.cn> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org In new revision of LS7A, some PCIe ports support larger value than 256, but their maximum supported MRRS values are not detectable. Moreover, the current loongson_mrrs_quirk() cannot avoid devices increasing its MRRS after pci_enable_device(), and some devices (e.g. Realtek 8169) will actually set a big value in its driver. So the only possible way is configure MRRS of all devices in BIOS, and add a pci host bridge bit flag (i.e., no_inc_mrrs) to stop the increasing MRRS operations. However, according to PCIe Spec, it is legal for an OS to program any value for MRRS, and it is also legal for an endpoint to generate a Read Request with any size up to its MRRS. As the hardware engineers say, the root cause here is LS7A doesn't break up large read requests. In detail, LS7A PCIe port reports CA (Completer Abort) if it receives a Memory Read request with a size that's "too big" ("too big" means larger than the PCIe ports can handle, which means 256 for some ports and 4096 for the others, and of course this is a problem in the LS7A's hardware design). Signed-off-by: Huacai Chen --- drivers/pci/controller/pci-loongson.c | 47 ++++++++++----------------- drivers/pci/pci.c | 6 ++++ include/linux/pci.h | 1 + 3 files changed, 25 insertions(+), 29 deletions(-) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 81361a056377..b249f46739ba 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -62,37 +62,26 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_LPC, system_bus_quirk); -static void loongson_mrrs_quirk(struct pci_dev *dev) +static void loongson_mrrs_quirk(struct pci_dev *pdev) { - struct pci_bus *bus = dev->bus; - struct pci_dev *bridge; - static const struct pci_device_id bridge_devids[] = { - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, - { 0, }, - }; - - /* look for the matching bridge */ - while (!pci_is_root_bus(bus)) { - bridge = bus->self; - bus = bus->parent; - /* - * Some Loongson PCIe ports have a h/w limitation of - * 256 bytes maximum read request size. They can't handle - * anything larger than this. So force this limit on - * any devices attached under these ports. - */ - if (pci_match_id(bridge_devids, bridge)) { - if (pcie_get_readrq(dev) > 256) { - pci_info(dev, "limiting MRRS to 256\n"); - pcie_set_readrq(dev, 256); - } - break; - } - } + /* + * Some Loongson PCIe ports have h/w limitations of maximum read + * request size. They can't handle anything larger than this. So + * force this limit on any devices attached under these ports. + */ + struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); + + if (!bridge) + return; + + bridge->no_inc_mrrs = 1; } -DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_mrrs_quirk); static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) { diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index aacf575c15cf..3279da8ce2dd 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -5800,6 +5800,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) { u16 v; int ret; + struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus); if (rq < 128 || rq > 4096 || !is_power_of_2(rq)) return -EINVAL; @@ -5818,6 +5819,11 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) v = (ffs(rq) - 8) << 12; + if (bridge->no_inc_mrrs) { + if (rq > pcie_get_readrq(dev)) + return -EINVAL; + } + ret = pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_READRQ, v); diff --git a/include/linux/pci.h b/include/linux/pci.h index 540b377ca8f6..e2583c2785e2 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -541,6 +541,7 @@ struct pci_host_bridge { void *release_data; unsigned int ignore_reset_delay:1; /* For entire hierarchy */ unsigned int no_ext_tags:1; /* No Extended Tags */ + unsigned int no_inc_mrrs:1; /* No Increase MRRS */ unsigned int native_aer:1; /* OS may use PCIe AER */ unsigned int native_pcie_hotplug:1; /* OS may use PCIe hotplug */ unsigned int native_shpc_hotplug:1; /* OS may use SHPC hotplug */ From patchwork Wed Aug 25 06:07:23 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?6ZmI5Y2O5omN?= X-Patchwork-Id: 1520533 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GvbFJ0ZC9z9sR4 for ; Wed, 25 Aug 2021 16:10:44 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238209AbhHYGL2 (ORCPT ); Wed, 25 Aug 2021 02:11:28 -0400 Received: from mail.kernel.org ([198.145.29.99]:45508 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237908AbhHYGL1 (ORCPT ); Wed, 25 Aug 2021 02:11:27 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id 765CE613A7; Wed, 25 Aug 2021 06:10:40 +0000 (UTC) From: Huacai Chen To: Bjorn Helgaas Cc: linux-pci@vger.kernel.org, Xuefeng Li , Huacai Chen , Jiaxun Yang , Huacai Chen Subject: [PATCH V8 4/5] PCI: Add quirk for LS7A to avoid reboot failure Date: Wed, 25 Aug 2021 14:07:23 +0800 Message-Id: <20210825060724.3385929-5-chenhuacai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210825060724.3385929-1-chenhuacai@loongson.cn> References: <20210825060724.3385929-1-chenhuacai@loongson.cn> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Commit cc27b735ad3a75574a ("PCI/portdrv: Turn off PCIe services during shutdown") causes poweroff/reboot failure on systems with LS7A chipset. We found that if we remove "pci_command &= ~PCI_COMMAND_MASTER;" in do_pci_disable_device(), it can work well. The hardware engineer says that the root cause is that CPU is still accessing PCIe devices while poweroff/reboot, and if we disable the Bus Master Bit at this time, the PCIe controller doesn't forward requests to downstream devices, and also doesn't send TIMEOUT to CPU, which causes CPU wait forever (hardware deadlock). This behavior is a PCIe protocol violation (Bus Master should not be involved in CPU MMIO transactions), and it will be fixed in new revisions of hardware (add timeout mechanism for CPU read request, whether or not Bus Master bit is cleared). On some x86 platforms, radeon/amdgpu devices can cause similar problems [1][2]. Once before I wanted to make a single patch to solve "all of these problems" together, but it seems unreasonable because maybe they are not exactly the same problem. So, this patch just add a quirk for LS7A to avoid clearing Bus Master bit in pcie_port_device_remove(), and leave other platforms as is. [1] https://bugs.freedesktop.org/show_bug.cgi?id=97980 [2] https://bugs.freedesktop.org/show_bug.cgi?id=98638 Signed-off-by: Huacai Chen --- drivers/pci/controller/pci-loongson.c | 20 ++++++++++++++++++++ drivers/pci/pcie/portdrv_core.c | 6 +++++- include/linux/pci.h | 1 + 3 files changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index b249f46739ba..d91d1c130374 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -83,6 +83,26 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_PCIE_PORT_2, loongson_mrrs_quirk); +static void loongson_bmaster_quirk(struct pci_dev *pdev) +{ + /* + * Some Loongson PCIe ports will cause CPU deadlock if disable + * the Bus Master bit during poweroff/reboot. + */ + struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); + + if (!bridge) + return; + + bridge->no_dis_bmaster = 1; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_bmaster_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_bmaster_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_bmaster_quirk); + static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) { struct pci_config_window *cfg; diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index e1fed6649c41..7f9549a1f48b 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -486,9 +486,13 @@ EXPORT_SYMBOL_GPL(pcie_port_find_device); */ void pcie_port_device_remove(struct pci_dev *dev) { + struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus); + device_for_each_child(&dev->dev, NULL, remove_iter); pci_free_irq_vectors(dev); - pci_disable_device(dev); + + if (!bridge->no_dis_bmaster) + pci_disable_device(dev); } /** diff --git a/include/linux/pci.h b/include/linux/pci.h index e2583c2785e2..46dfbb61f2f0 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -542,6 +542,7 @@ struct pci_host_bridge { unsigned int ignore_reset_delay:1; /* For entire hierarchy */ unsigned int no_ext_tags:1; /* No Extended Tags */ unsigned int no_inc_mrrs:1; /* No Increase MRRS */ + unsigned int no_dis_bmaster:1; /* No Disable Bus Master */ unsigned int native_aer:1; /* OS may use PCIe AER */ unsigned int native_pcie_hotplug:1; /* OS may use PCIe hotplug */ unsigned int native_shpc_hotplug:1; /* OS may use SHPC hotplug */ From patchwork Wed Aug 25 06:07:24 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?6ZmI5Y2O5omN?= X-Patchwork-Id: 1520534 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GvbFf3CXsz9sR4 for ; Wed, 25 Aug 2021 16:11:02 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237908AbhHYGLq (ORCPT ); Wed, 25 Aug 2021 02:11:46 -0400 Received: from mail.kernel.org ([198.145.29.99]:45656 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238221AbhHYGLp (ORCPT ); Wed, 25 Aug 2021 02:11:45 -0400 Received: by mail.kernel.org (Postfix) with ESMTPSA id DFF606138B; Wed, 25 Aug 2021 06:10:55 +0000 (UTC) From: Huacai Chen To: Bjorn Helgaas Cc: linux-pci@vger.kernel.org, Xuefeng Li , Huacai Chen , Jiaxun Yang , Jianmin Lv , Huacai Chen Subject: [PATCH V8 5/5] PCI: Add quirk for multifunction devices of LS7A Date: Wed, 25 Aug 2021 14:07:24 +0800 Message-Id: <20210825060724.3385929-6-chenhuacai@loongson.cn> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210825060724.3385929-1-chenhuacai@loongson.cn> References: <20210825060724.3385929-1-chenhuacai@loongson.cn> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Jianmin Lv In LS7A, multifunction device use same PCI PIN (because the PIN register report the same INTx value to each function) but we need different IRQ for different functions, so add a quirk to fix it for standard PCI PIN usage. This patch only affect ACPI based systems (and only needed by ACPI based systems, too). For DT based systems, the irq mappings is defined in .dts files and be handled by of_irq_parse_pci(). Signed-off-by: Jianmin Lv Signed-off-by: Huacai Chen --- drivers/pci/controller/pci-loongson.c | 29 +++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index d91d1c130374..8b12e7da1238 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -22,6 +22,12 @@ #define DEV_LS2K_APB 0x7a02 #define DEV_LS7A_CONF 0x7a10 #define DEV_LS7A_LPC 0x7a0c +#define DEV_LS7A_GMAC 0x7a03 +#define DEV_LS7A_DC 0x7a06 +#define DEV_LS7A_GPU 0x7a15 +#define DEV_LS7A_AHCI 0x7a08 +#define DEV_LS7A_EHCI 0x7a14 +#define DEV_LS7A_OHCI 0x7a24 #define FLAG_CFG0 BIT(0) #define FLAG_CFG1 BIT(1) @@ -103,6 +109,29 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_PCIE_PORT_2, loongson_bmaster_quirk); +static void loongson_pci_pin_quirk(struct pci_dev *pdev) +{ + pdev->pin = 1 + (PCI_FUNC(pdev->devfn) & 3); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_DC, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_GPU, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_GMAC, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_AHCI, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_EHCI, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_OHCI, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_pci_pin_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_pci_pin_quirk); + static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) { struct pci_config_window *cfg;