From patchwork Tue Oct 13 13:15:45 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rui Miguel Silva X-Patchwork-Id: 1381578 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=UufO7gbv; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4C9bf43rkKz9sTs for ; Wed, 14 Oct 2020 00:16:12 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727526AbgJMNQK (ORCPT ); Tue, 13 Oct 2020 09:16:10 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52916 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726648AbgJMNQJ (ORCPT ); Tue, 13 Oct 2020 09:16:09 -0400 Received: from mail-wr1-x444.google.com (mail-wr1-x444.google.com [IPv6:2a00:1450:4864:20::444]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 394EFC0613D0 for ; Tue, 13 Oct 2020 06:16:08 -0700 (PDT) Received: by mail-wr1-x444.google.com with SMTP id i1so17878526wro.1 for ; Tue, 13 Oct 2020 06:16:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=VU2ZxqifLVfdvXSsHtiP10MIVpWQnhcB7qzC0l8n27Q=; b=UufO7gbvHGhekdd1ajNHDbaSed4SdIC7Spgf6zXceCSYOf/ADkjmmkC9V23bqUMbB1 ZsrrCkmtKhTx4DbLS4KY8QwRW2CIP8POGiUetpNpMGWyvu2xayQN3CmH/y6R+UkzFZOk y8YrUg4kpIWXTd2gNzWGuF0gER7c7i3EQnJexjIkYzTIZnfAxw8SehnLQOBDKkmNdeFk NXrJ3liIsKToDluLopfwwND95b7h+vHBVPoOKOYPmhOTpJspfjGU4ZUip8DoRN4/k4yZ BKICBEMee6dlz2O01Gebr2Y2B/VhlrIQKrfs/AgiXMR+TqUbTk7P30Fiu+WgLznCVNAU YGWA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=VU2ZxqifLVfdvXSsHtiP10MIVpWQnhcB7qzC0l8n27Q=; b=nml/vSGXPly3OpMBQf+bIaWAtbFzPUDA7S+Grc3Y/oGkLwz9v7U4v96P0vpH8zi5IN b+UM45BkTf+zIGSrh0sO+t8dwkmT7sZx9C5k/St4DccCfmk+5L084Pw8PRPqRDAStUjX Z2MgdgBi8g50DCm2r5ORPug6epR+flOkyK3o1xx69DM9AXTFJUj60Mw0xHNA4HLfC3Qj x+pIXQn9CtYZ2XDDSZHeHHuAphr7d5NrmwO9FhWX/OIu55fujdw7abNFVjfxmkVJnUhd It2ghiyzfcqghaX8JYH2oL5geay1b0vUHaITGpxP7p5GwmtBhCNYpnvPzx0bDecoOXsV ijSA== X-Gm-Message-State: AOAM531xB0LCQz+hCDHSYQN2U1/qncC2+YnUzwg1lDlsqGWPy3ZueiUE p6GOIx09b2BL3lI3c9Z1QzRQkQ== X-Google-Smtp-Source: ABdhPJyrMGbPezIyjxdtuy1W66p9EYHvfNv74EcrgGuUCuA1A4K2B3PooNGWh648/iYuSDfIvVd8pQ== X-Received: by 2002:a5d:480a:: with SMTP id l10mr34477948wrq.238.1602594966785; Tue, 13 Oct 2020 06:16:06 -0700 (PDT) Received: from arch-thunder.local (a109-49-46-234.cpe.netcabo.pt. [109.49.46.234]) by smtp.gmail.com with ESMTPSA id u63sm27362883wmb.13.2020.10.13.06.16.03 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 13 Oct 2020 06:16:04 -0700 (PDT) From: Rui Miguel Silva X-Google-Original-From: Rui Miguel Silva To: Jonathan Cameron , Rob Herring , Fabio Estevam Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, Rui Miguel Silva Subject: [PATCH] dt-bindings: fxas21002c: convert bindings to yaml Date: Tue, 13 Oct 2020 14:15:45 +0100 Message-Id: <20201013131545.503434-1-rmfrfs@gmail.com> X-Mailer: git-send-email 2.28.0 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert fxas21002c gyroscope sensor bindings documentation to yaml schema and remove the textual bindings document. Signed-off-by: Rui Miguel Silva --- .../bindings/iio/gyroscope/nxp,fxas21002c.txt | 31 -------- .../iio/gyroscope/nxp,fxas21002c.yaml | 77 +++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 78 insertions(+), 32 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt deleted file mode 100644 index 465e104bbf14..000000000000 --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt +++ /dev/null @@ -1,31 +0,0 @@ -* NXP FXAS21002C Gyroscope device tree bindings - -http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C - -Required properties: - - compatible : should be "nxp,fxas21002c" - - reg : the I2C address of the sensor or SPI chip select number for the - device. - - vdd-supply: phandle to the regulator that provides power to the sensor. - - vddio-supply: phandle to the regulator that provides power to the bus. - -Optional properties: - - reset-gpios : gpio used to reset the device, see gpio/gpio.txt - - interrupts : device support 2 interrupts, INT1 and INT2, - the interrupts can be triggered on rising or falling edges. - See interrupt-controller/interrupts.txt - - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt - line in use. - - drive-open-drain: the interrupt/data ready line will be configured - as open drain, which is useful if several sensors share - the same interrupt line. This is a boolean property. - (This binding is taken from pinctrl/pinctrl-bindings.txt) - -Example: - -gyroscope@20 { - compatible = "nxp,fxas21002c"; - reg = <0x20>; - vdd-supply = <®_peri_3p15v>; - vddio-supply = <®_peri_3p15v>; -}; diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml new file mode 100644 index 000000000000..7680e97cf1d9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/gyroscope/nxp,fxas21002c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP FXAS21002C Gyroscope Unit + +maintainers: + - Rui Miguel Silva + +description: | + 3 axis digital gyroscope device with an I2C and SPI interface. + http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C + +properties: + compatible: + enum: + - nxp,fxas21002c + + reg: + maxItems: 1 + description: base address of the device + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + + reset-gpios: + maxItems: 1 + description: GPIO connected to reset + + interrupts: + minItems: 1 + maxItems: 2 + description: device support 2 interrupts, INT1 and INT2, the interrupts can + be triggered on rising or falling edges. + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + description: gyroscope interrupt line in use. + + drive-open-drain: + type: boolean + description: the interrupt/data ready line will be configured as open drain, + which is useful if several sensors share the same interrupt + line. + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + gyroscope@20 { + compatible = "nxp,fxas21002c"; + reg = <0x20>; + + vdd-supply = <®_peri_3p15v>; + vddio-supply = <®_peri_3p15v>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 6594f0966716..2e85e114c9c3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12469,7 +12469,7 @@ NXP FXAS21002C DRIVER M: Rui Miguel Silva L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt +F: Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml F: drivers/iio/gyro/fxas21002c.h F: drivers/iio/gyro/fxas21002c_core.c F: drivers/iio/gyro/fxas21002c_i2c.c