From patchwork Tue Sep 1 12:55:14 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hauke Mehrtens X-Patchwork-Id: 1354972 X-Patchwork-Delegate: hauke@hauke-m.de Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.openwrt.org (client-ip=2001:8b0:10b:1231::1; helo=merlin.infradead.org; envelope-from=openwrt-devel-bounces+incoming=patchwork.ozlabs.org@lists.openwrt.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=hauke-m.de Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; secure) header.d=lists.infradead.org header.i=@lists.infradead.org header.a=rsa-sha256 header.s=merlin.20170209 header.b=EBr2UWfx; dkim-atps=neutral Received: from merlin.infradead.org (merlin.infradead.org [IPv6:2001:8b0:10b:1231::1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4BgnCZ2FSwz9sVT for ; Tue, 1 Sep 2020 22:57:14 +1000 (AEST) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:Message-Id:Date:Subject:To:From: Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender :Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References:List-Owner; bh=LJpGDoaENoH73vfPffRqVks/RC1JLgqjttz6RBJn60Y=; b=EBr2UWfx6A8SbKdKHEYsuaPB4r ODiPZFbOTf7oopi90NQnvTf+/lOjq4PZ23Azjo7VlJdls8tqut2jNrH4DcQ/VS9K7QhHPSqjkwgGM FVKP/BuH4ci6kptnG7mHbdTDPOuaY3ZgtCWe5MH/ovRUaBKof86rN31r7zYVrjsA07nzNHtG2h2ob vSUFE2AQFyUKhsOSEp0DchYzVVJ2iEIj8KOH9Wwgsdd/DQoqqUo+OH/RMX8XMtCjTq0QyxjAH6V5C NEDA3sBXSIshkMSXHVi4xseBcV5P+nVp8k9zuYF3eMuogeZg9dc86vfHvupZesKijdw0Dn6dv2emw 3CN2hGzQ==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kD5oz-0006ld-Ef; Tue, 01 Sep 2020 12:55:33 +0000 Received: from mout-p-102.mailbox.org ([2001:67c:2050::465:102]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kD5ov-0006ka-2F for openwrt-devel@lists.openwrt.org; Tue, 01 Sep 2020 12:55:31 +0000 Received: from smtp1.mailbox.org (smtp1.mailbox.org [80.241.60.240]) (using TLSv1.2 with cipher ECDHE-RSA-CHACHA20-POLY1305 (256/256 bits)) (No client certificate requested) by mout-p-102.mailbox.org (Postfix) with ESMTPS id 4Bgn9W0dgtzKmRw; Tue, 1 Sep 2020 14:55:27 +0200 (CEST) X-Virus-Scanned: amavisd-new at heinlein-support.de Received: from smtp1.mailbox.org ([80.241.60.240]) by spamfilter04.heinlein-hosting.de (spamfilter04.heinlein-hosting.de [80.241.56.122]) (amavisd-new, port 10030) with ESMTP id J422z_oljq1d; Tue, 1 Sep 2020 14:55:20 +0200 (CEST) From: Hauke Mehrtens To: openwrt-devel@lists.openwrt.org Subject: [PATCH] iw: Update to version 5.8 Date: Tue, 1 Sep 2020 14:55:14 +0200 Message-Id: <20200901125514.22223-1-hauke@hauke-m.de> MIME-Version: 1.0 X-MBO-SPAM-Probability: X-Rspamd-Score: -6.42 / 15.00 / 15.00 X-Rspamd-Queue-Id: CD4A213EC X-Rspamd-UID: 2f5f3a X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200901_085529_417636_2465A401 X-CRM114-Status: GOOD ( 37.59 ) X-Spam-Score: 0.0 (/) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at https://www.dnswl.org/, no trust [2001:67c:2050:0:0:0:465:102 listed in] [list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record X-BeenThere: openwrt-devel@lists.openwrt.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: OpenWrt Development List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Hauke Mehrtens Sender: "openwrt-devel" Errors-To: openwrt-devel-bounces+incoming=patchwork.ozlabs.org@lists.openwrt.org The ipk sizes for mips_24Kc change like this: old: iw_5.4-1_mips_24kc.ipk 35.767 iw-full_5.4-1_mips_24kc.ipk 68.423 new: iw_5.8-1_mips_24kc.ipk 36.883 iw-full_5.8-1_mips_24kc.ipk 71.992 Signed-off-by: Hauke Mehrtens --- package/network/utils/iw/Makefile | 4 +- .../utils/iw/patches/001-nl80211_h_sync.patch | 687 +----------------- .../utils/iw/patches/200-reduce_size.patch | 85 ++- 3 files changed, 53 insertions(+), 723 deletions(-) diff --git a/package/network/utils/iw/Makefile b/package/network/utils/iw/Makefile index 7abf93e01e8e..90e678291170 100644 --- a/package/network/utils/iw/Makefile +++ b/package/network/utils/iw/Makefile @@ -8,12 +8,12 @@ include $(TOPDIR)/rules.mk PKG_NAME:=iw -PKG_VERSION:=5.4 +PKG_VERSION:=5.8 PKG_RELEASE:=1 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz PKG_SOURCE_URL:=@KERNEL/software/network/iw -PKG_HASH:=a2469f677088d7b1070a7fbb28f3c747041697e8f6ec70783339cb1bc27a395f +PKG_HASH:=b59c4bacb0b6675cc09f2f30ebdceb91174cb65443d0a062fba2c09fad772db4 PKG_MAINTAINER:=Felix Fietkau PKG_LICENSE:=GPL-2.0 diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index d935a1dc3ebf..4b462d3f205a 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,696 +1,21 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -11,7 +11,7 @@ - * Copyright 2008 Jouni Malinen - * Copyright 2008 Colin McCabe - * Copyright 2015-2017 Intel Deutschland GmbH -- * Copyright (C) 2018-2019 Intel Corporation -+ * Copyright (C) 2018-2020 Intel Corporation +@@ -2515,6 +2515,9 @@ enum nl80211_commands { + * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from + * association request when used with NL80211_CMD_NEW_STATION). * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above -@@ -249,6 +249,45 @@ - */ - - /** -+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs -+ * -+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they -+ * support offloading VLAN functionality in a manner where the driver exposes a -+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs -+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet -+ * case. Frames received from stations that are not assigned to any VLAN are -+ * delivered on the main netdev and frames to such stations can be sent through -+ * that main netdev. -+ * -+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and -+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using -+ * %NL80211_ATTR_VLAN_ID. -+ */ -+ -+/** -+ * DOC: TID configuration -+ * -+ * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG -+ * attribute given in wiphy capabilities. -+ * -+ * The necessary configuration parameters are mentioned in -+ * &enum nl80211_tid_config_attr and it will be passed to the -+ * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. -+ * -+ * If the configuration needs to be applied for specific peer then the MAC -+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the -+ * configuration will be applied for all the connected peers in the vif except -+ * any peers that have peer specific configuration for the TID by default; if -+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values -+ * will be overwritten. -+ * -+ * All this configuration is valid only for STA's current connection -+ * i.e. the configuration will be reset to default when the STA connects back -+ * after disconnection/roaming, and this configuration will be cleared when -+ * the interface goes down. -+ */ -+ -+/** - * enum nl80211_commands - supported nl80211 commands - * - * @NL80211_CMD_UNSPEC: unspecified command to catch errors -@@ -257,13 +296,14 @@ - * to get a list of all present wiphys. - * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or - * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, -- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the -- * attributes determining the channel width; this is used for setting -- * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, -- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, -- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. -- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL -- * instead, the support here is for backward compatibility only. -+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, -+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the -+ * channel width; this is used for setting monitor mode channel), -+ * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, -+ * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or -+ * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, -+ * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward -+ * compatibility only. - * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request - * or rename notification. Has attributes %NL80211_ATTR_WIPHY and - * %NL80211_ATTR_WIPHY_NAME. -@@ -312,7 +352,8 @@ - * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, - * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. - * The channel to use can be set on the interface or be given using the -- * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. -+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the -+ * attributes determining channel width. - * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP - * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface - * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP -@@ -497,11 +538,12 @@ - * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and - * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify - * the SSID (mainly for association, but is included in authentication -- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used -- * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE -- * is used to specify the authentication type. %NL80211_ATTR_IE is used to -- * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) -- * to be added to the frame. -+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + -+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the -+ * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the -+ * authentication type. %NL80211_ATTR_IE is used to define IEs -+ * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added -+ * to the frame. - * When used as an event, this reports reception of an Authentication - * frame in station and IBSS modes when the local MLME processed the - * frame, i.e., it was for the local STA and was received in correct -@@ -556,8 +598,9 @@ - * requests to connect to a specified network but without separating - * auth and assoc steps. For this, you need to specify the SSID in a - * %NL80211_ATTR_SSID attribute, and can optionally specify the association -- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, -- * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, -+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, -+ * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, -+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, - * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and -@@ -571,6 +614,14 @@ - * set of BSSID,frequency parameters is used (i.e., either the enforcing - * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict - * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). -+ * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if -+ * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is -+ * included, these IEs through %NL80211_ATTR_IE are specified by the user -+ * space based on the best possible BSS selected. Thus, if the driver ends -+ * up selecting a different BSS, it can modify these IEs accordingly (e.g. -+ * userspace asks the driver to perform PMKSA caching with BSS1 and the -+ * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE -+ * has to get updated with the apt PMKID). - * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within - * the ESS in case the device is already associated and an association with - * a different BSS is desired. -@@ -640,6 +691,10 @@ - * four bytes for vendor frames including the OUI. The registration - * cannot be dropped, but is removed automatically when the netlink - * socket is closed. Multiple registrations can be made. -+ * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if -+ * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which -+ * case the registration can also be modified to include/exclude the -+ * flag, rather than requiring unregistration to change it. - * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for - * backward compatibility - * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This -@@ -739,7 +794,7 @@ - * various triggers. These triggers can be configured through this - * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For - * more background information, see -- * http://wireless.kernel.org/en/users/Documentation/WoWLAN. -+ * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. - * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification - * from the driver reporting the wakeup reason. In this case, the - * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason -@@ -1101,6 +1156,20 @@ - * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame - * content. The frame is ethernet data. - * -+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration -+ * is passed using %NL80211_ATTR_TID_CONFIG attribute. -+ * -+ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon -+ * frame. This event is used to indicate that a received Beacon frame was -+ * dropped because it did not include a valid MME MIC while beacon -+ * protection was enabled (BIGTK configured in station mode). -+ * -+ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control -+ * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. -+ * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME -+ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included -+ * if the recipient acknowledged the frame. -+ * - * @NL80211_CMD_MAX: highest used command number - * @__NL80211_CMD_AFTER_LAST: internal use - */ -@@ -1325,6 +1394,12 @@ enum nl80211_commands { - - NL80211_CMD_PROBE_MESH_LINK, - -+ NL80211_CMD_SET_TID_CONFIG, -+ -+ NL80211_CMD_UNPROT_BEACON, -+ -+ NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, -+ - /* add new commands above here */ - - /* used to define NL80211_CMD_MAX below */ -@@ -1370,7 +1445,8 @@ enum nl80211_commands { - * of &enum nl80211_chan_width, describing the channel width. See the - * documentation of the enum for more information. - * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the -- * channel, used for anything but 20 MHz bandwidth -+ * channel, used for anything but 20 MHz bandwidth. In S1G this is the -+ * operating channel center frequency. - * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the - * channel, used only for 80+80 MHz bandwidth - * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ -@@ -1580,7 +1656,8 @@ enum nl80211_commands { - * flag is included, then control port frames are sent over NL80211 instead - * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is - * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER -- * flag. -+ * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth -+ * frames are not forwared over the control port. - * - * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. - * We recommend using nested, driver-specific attributes within this. -@@ -2373,6 +2450,64 @@ enum nl80211_commands { - * the allowed channel bandwidth configurations. (u8 attribute) - * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. - * -+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key -+ * (u16). -+ * -+ * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. -+ * -+ * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry -+ * using attributes from &enum nl80211_iftype_akm_attributes. This -+ * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating -+ * supported AKM suites capability per interface. AKMs advertised in -+ * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not -+ * advertised for a specific interface type. -+ * -+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a -+ * nested attribute with &enum nl80211_tid_config_attr sub-attributes; -+ * on output (in wiphy attributes) it contains only the feature sub- -+ * attributes. -+ * -+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control -+ * port in order to forward/receive them as ordinary data frames. -+ * -+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, -+ * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). -+ * An optional parameter configured through %NL80211_CMD_SET_PMKSA. -+ * Drivers that trigger roaming need to know the lifetime of the -+ * configured PMKSA for triggering the full vs. PMKSA caching based -+ * authentication. This timeout helps authentication methods like SAE, -+ * where PMK gets updated only by going through a full (new SAE) -+ * authentication instead of getting updated during an association for EAP -+ * authentication. No new full authentication within the PMK expiry shall -+ * result in a disassociation at the end of the lifetime. -+ * -+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in -+ * terms of percentage of %NL80211_ATTR_PMK_LIFETIME -+ * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional -+ * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the -+ * driver to trigger a full authentication roam (without PMKSA caching) -+ * after the reauthentication threshold time, but before the PMK lifetime -+ * has expired. -+ * -+ * Authentication methods like SAE need to be able to generate a new PMKSA -+ * entry without having to force a disconnection after the PMK timeout. If -+ * no roaming occurs between the reauth threshold and PMK expiration, -+ * disassociation is still forced. -+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the -+ * %NL80211_CMD_REGISTER_FRAME command, see the description there. -+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated -+ * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with -+ * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. -+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the -+ * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. -+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies -+ * -+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from -+ * association request when used with NL80211_CMD_NEW_STATION). -+ * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2835,6 +2970,28 @@ enum nl80211_attrs { - NL80211_ATTR_WIPHY_EDMG_CHANNELS, - NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, +@@ -2997,6 +3000,8 @@ enum nl80211_attrs { + + NL80211_ATTR_HE_6GHZ_CAPABILITY, -+ NL80211_ATTR_VLAN_ID, -+ -+ NL80211_ATTR_HE_BSS_COLOR, -+ -+ NL80211_ATTR_IFTYPE_AKM_SUITES, -+ -+ NL80211_ATTR_TID_CONFIG, -+ -+ NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, -+ -+ NL80211_ATTR_PMK_LIFETIME, -+ NL80211_ATTR_PMK_REAUTH_THRESHOLD, -+ -+ NL80211_ATTR_RECEIVE_MULTICAST, -+ NL80211_ATTR_WIPHY_FREQ_OFFSET, -+ NL80211_ATTR_CENTER_FREQ1_OFFSET, -+ NL80211_ATTR_SCAN_FREQ_KHZ, -+ -+ NL80211_ATTR_HE_6GHZ_CAPABILITY, -+ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -3413,6 +3570,8 @@ enum nl80211_mpath_info { - * defined in HE capabilities IE - * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently - * defined -+ * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), -+ * given for all 6 GHz band channels - * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use - */ - enum nl80211_band_iftype_attr { -@@ -3423,6 +3582,7 @@ enum nl80211_band_iftype_attr { - NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, - NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, - NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, -+ NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, - - /* keep last */ - __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, -@@ -3554,6 +3714,9 @@ enum nl80211_wmm_rule { - * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. - * This is a nested attribute that contains the wmm limitation per AC. - * (see &enum nl80211_wmm_rule) -+ * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel -+ * in current regulatory domain. -+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz - * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number - * currently defined - * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use -@@ -3583,6 +3746,8 @@ enum nl80211_frequency_attr { - NL80211_FREQUENCY_ATTR_NO_20MHZ, - NL80211_FREQUENCY_ATTR_NO_10MHZ, - NL80211_FREQUENCY_ATTR_WMM, -+ NL80211_FREQUENCY_ATTR_NO_HE, -+ NL80211_FREQUENCY_ATTR_OFFSET, - - /* keep last */ - __NL80211_FREQUENCY_ATTR_AFTER_LAST, -@@ -3780,6 +3945,7 @@ enum nl80211_sched_scan_match_attr { - * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation - * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed - * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed -+ * @NL80211_RRF_NO_HE: HE operation not allowed - */ - enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, -@@ -3797,6 +3963,7 @@ enum nl80211_reg_rule_flags { - NL80211_RRF_NO_HT40PLUS = 1<<14, - NL80211_RRF_NO_80MHZ = 1<<15, - NL80211_RRF_NO_160MHZ = 1<<16, -+ NL80211_RRF_NO_HE = 1<<17, - }; - - #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR -@@ -4351,6 +4518,7 @@ enum nl80211_bss_scan_width { - * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. - * Contains a nested array of signal strength attributes (u8, dBm), - * using the nesting index as the antenna number. -+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz - * @__NL80211_BSS_AFTER_LAST: internal - * @NL80211_BSS_MAX: highest BSS attribute - */ -@@ -4375,6 +4543,7 @@ enum nl80211_bss { - NL80211_BSS_PARENT_TSF, - NL80211_BSS_PARENT_BSSID, - NL80211_BSS_CHAIN_SIGNAL, -+ NL80211_BSS_FREQUENCY_OFFSET, - - /* keep last */ - __NL80211_BSS_AFTER_LAST, -@@ -4503,6 +4672,7 @@ enum nl80211_key_default_types { - * See &enum nl80211_key_default_types. - * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. - * Defaults to @NL80211_KEY_RX_TX. -+ * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key - * - * @__NL80211_KEY_AFTER_LAST: internal - * @NL80211_KEY_MAX: highest key attribute -@@ -4518,6 +4688,7 @@ enum nl80211_key_attributes { - NL80211_KEY_TYPE, - NL80211_KEY_DEFAULT_TYPES, - NL80211_KEY_MODE, -+ NL80211_KEY_DEFAULT_BEACON, - - /* keep last */ - __NL80211_KEY_AFTER_LAST, -@@ -4674,6 +4845,92 @@ enum nl80211_tx_power_setting { - }; - - /** -+ * enum nl80211_tid_config - TID config state -+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID -+ * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID -+ */ -+enum nl80211_tid_config { -+ NL80211_TID_CONFIG_ENABLE, -+ NL80211_TID_CONFIG_DISABLE, -+}; -+ -+/* enum nl80211_tx_rate_setting - TX rate configuration type -+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate -+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter -+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter -+ */ -+enum nl80211_tx_rate_setting { -+ NL80211_TX_RATE_AUTOMATIC, -+ NL80211_TX_RATE_LIMITED, -+ NL80211_TX_RATE_FIXED, -+}; -+ -+/* enum nl80211_tid_config_attr - TID specific configuration. -+ * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values -+ * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported -+ * for per-vif configuration; doesn't list the ones that are generic -+ * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). -+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but -+ * per peer instead. -+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates -+ * that the new configuration overrides all previous peer -+ * configurations, otherwise previous peer specific configurations -+ * should be left untouched. -+ * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) -+ * Its type is u16. -+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. -+ * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. -+ * Its type is u8. -+ * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame -+ * transmission, user-space sets this configuration in -+ * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and -+ * the max value is advertised by the driver in this attribute on -+ * output in wiphy capabilities. -+ * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame -+ * transmission, user-space sets this configuration in -+ * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and -+ * the max value is advertised by the driver in this attribute on -+ * output in wiphy capabilities. -+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation -+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. -+ * Its type is u8, using the values from &nl80211_tid_config. -+ * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs -+ * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using -+ * the values from &nl80211_tid_config. -+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation -+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. -+ * Its type is u8, using the values from &nl80211_tid_config. -+ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful -+ * to notfiy the driver that what type of txrate should be used -+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using -+ * the values form &nl80211_tx_rate_setting. -+ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied -+ * with the parameters passed through %NL80211_ATTR_TX_RATES. -+ * configuration is applied to the data frame for the tid to that connected -+ * station. -+ */ -+enum nl80211_tid_config_attr { -+ __NL80211_TID_CONFIG_ATTR_INVALID, -+ NL80211_TID_CONFIG_ATTR_PAD, -+ NL80211_TID_CONFIG_ATTR_VIF_SUPP, -+ NL80211_TID_CONFIG_ATTR_PEER_SUPP, -+ NL80211_TID_CONFIG_ATTR_OVERRIDE, -+ NL80211_TID_CONFIG_ATTR_TIDS, -+ NL80211_TID_CONFIG_ATTR_NOACK, -+ NL80211_TID_CONFIG_ATTR_RETRY_SHORT, -+ NL80211_TID_CONFIG_ATTR_RETRY_LONG, -+ NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, -+ NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, -+ NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, -+ NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, -+ NL80211_TID_CONFIG_ATTR_TX_RATE, -+ -+ /* keep last */ -+ __NL80211_TID_CONFIG_ATTR_AFTER_LAST, -+ NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 -+}; -+ -+/** - * enum nl80211_packet_pattern_attr - packet pattern attribute - * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute - * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has -@@ -5144,6 +5401,8 @@ enum plink_actions { - - #define NL80211_KCK_LEN 16 - #define NL80211_KEK_LEN 16 -+#define NL80211_KCK_EXT_LEN 24 -+#define NL80211_KEK_EXT_LEN 32 - #define NL80211_REPLAY_CTR_LEN 8 - - /** -@@ -5152,6 +5411,7 @@ enum plink_actions { - * @NL80211_REKEY_DATA_KEK: key encryption key (binary) - * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) - * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) -+ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) - * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) - * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) - */ -@@ -5160,6 +5420,7 @@ enum nl80211_rekey_data { - NL80211_REKEY_DATA_KEK, - NL80211_REKEY_DATA_KCK, - NL80211_REKEY_DATA_REPLAY_CTR, -+ NL80211_REKEY_DATA_AKM, - - /* keep last */ - NUM_NL80211_REKEY_DATA, -@@ -5484,6 +5745,39 @@ enum nl80211_feature_flags { - * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in - * station mode (SAE password is passed as part of the connect command). - * -+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev -+ * with VLAN tagged frames and separate VLAN-specific netdevs added using -+ * vconfig similarly to the Ethernet case. -+ * -+ * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) -+ * feature, which prevents bufferbloat by using the expected transmission -+ * time to limit the amount of data buffered in the hardware. -+ * -+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection -+ * and can receive key configuration for BIGTK using key indexes 6 and 7. -+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon -+ * protection as a client only and cannot transmit protected beacons. -+ * -+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the -+ * forwarding of preauth frames over the control port. They are then -+ * handled as ordinary data frames. -+ * -+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames -+ * -+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations -+ * in IBSS mode, essentially by dropping their state. -+ * -+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations -+ * are possible for multicast frames and those will be reported properly. -+ * -+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and -+ * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to -+ * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be -+ * included in the scan request. -+ * -+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver -+ * can report tx status for control port over nl80211 tx operations. -+ * - * @NUM_NL80211_EXT_FEATURES: number of extended features. - * @MAX_NL80211_EXT_FEATURES: highest extended feature index. - */ -@@ -5529,6 +5823,16 @@ enum nl80211_ext_feature_index { - NL80211_EXT_FEATURE_EXT_KEY_ID, - NL80211_EXT_FEATURE_STA_TX_PWR, - NL80211_EXT_FEATURE_SAE_OFFLOAD, -+ NL80211_EXT_FEATURE_VLAN_OFFLOAD, -+ NL80211_EXT_FEATURE_AQL, -+ NL80211_EXT_FEATURE_BEACON_PROTECTION, -+ NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, -+ NL80211_EXT_FEATURE_PROTECTED_TWT, -+ NL80211_EXT_FEATURE_DEL_IBSS_STA, -+ NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, -+ NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, -+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, -+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, - - /* add new features before the definition below */ - NUM_NL80211_EXT_FEATURES, -@@ -5640,6 +5944,9 @@ enum nl80211_timeout_reason { - * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to - * only have supported rates and no additional capabilities (unless - * added by userspace explicitly.) -+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with -+ * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means -+ * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. - */ - enum nl80211_scan_flags { - NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, -@@ -5655,6 +5962,7 @@ enum nl80211_scan_flags { - NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, - NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, - NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, -+ NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, - }; - - /** -@@ -6151,12 +6459,14 @@ enum nl80211_ftm_responder_stats { - * @NL80211_PREAMBLE_HT: HT preamble - * @NL80211_PREAMBLE_VHT: VHT preamble - * @NL80211_PREAMBLE_DMG: DMG preamble -+ * @NL80211_PREAMBLE_HE: HE preamble - */ - enum nl80211_preamble { - NL80211_PREAMBLE_LEGACY, - NL80211_PREAMBLE_HT, - NL80211_PREAMBLE_VHT, - NL80211_PREAMBLE_DMG, -+ NL80211_PREAMBLE_HE, - }; - - /** -@@ -6349,6 +6659,10 @@ enum nl80211_peer_measurement_attrs { - * is valid) - * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating - * the maximum FTMs per burst (if not present anything is valid) -+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if -+ * trigger based ranging measurement is supported -+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating -+ * if non trigger based ranging measurement is supported - * - * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal - * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number -@@ -6364,6 +6678,8 @@ enum nl80211_peer_measurement_ftm_capa { - NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, - NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, - NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, -+ NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, -+ NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, - - /* keep last */ - NUM_NL80211_PMSR_FTM_CAPA_ATTR, -@@ -6393,6 +6709,20 @@ enum nl80211_peer_measurement_ftm_capa { - * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) - * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data - * (flag) -+ * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging -+ * measurement (flag). -+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are -+ * mutually exclusive. -+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor -+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based -+ * ranging will be used. -+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based -+ * ranging measurement (flag) -+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are -+ * mutually exclusive. -+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor -+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based -+ * ranging will be used. - * - * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal - * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number -@@ -6409,6 +6739,8 @@ enum nl80211_peer_measurement_ftm_req { - NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, - NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, - NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, -+ NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, -+ NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, - - /* keep last */ - NUM_NL80211_PMSR_FTM_REQ_ATTR, -@@ -6548,5 +6880,51 @@ enum nl80211_obss_pd_attributes { - NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, - }; - -+/** -+ * enum nl80211_bss_color_attributes - BSS Color attributes -+ * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid -+ * -+ * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. -+ * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. -+ * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. -+ * -+ * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal -+ * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. -+ */ -+enum nl80211_bss_color_attributes { -+ __NL80211_HE_BSS_COLOR_ATTR_INVALID, -+ -+ NL80211_HE_BSS_COLOR_ATTR_COLOR, -+ NL80211_HE_BSS_COLOR_ATTR_DISABLED, -+ NL80211_HE_BSS_COLOR_ATTR_PARTIAL, -+ -+ /* keep last */ -+ __NL80211_HE_BSS_COLOR_ATTR_LAST, -+ NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, -+}; -+ -+/** -+ * enum nl80211_iftype_akm_attributes - interface type AKM attributes -+ * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid -+ * -+ * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag -+ * attribute for each interface type that supports AKM suites specified in -+ * %NL80211_IFTYPE_AKM_ATTR_SUITES -+ * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported -+ * AKM suites for the specified interface types. -+ * -+ * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal -+ * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. -+ */ -+enum nl80211_iftype_akm_attributes { -+ __NL80211_IFTYPE_AKM_ATTR_INVALID, -+ -+ NL80211_IFTYPE_AKM_ATTR_IFTYPES, -+ NL80211_IFTYPE_AKM_ATTR_SUITES, -+ -+ /* keep last */ -+ __NL80211_IFTYPE_AKM_ATTR_LAST, -+ NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, -+}; - - #endif /* __LINUX_NL80211_H */ diff --git a/package/network/utils/iw/patches/200-reduce_size.patch b/package/network/utils/iw/patches/200-reduce_size.patch index 58613d59a0b0..24eb96537b0f 100644 --- a/package/network/utils/iw/patches/200-reduce_size.patch +++ b/package/network/utils/iw/patches/200-reduce_size.patch @@ -1,6 +1,6 @@ --- a/event.c +++ b/event.c -@@ -699,6 +699,7 @@ static int print_event(struct nl_msg *ms +@@ -944,6 +944,7 @@ static int print_event(struct nl_msg *ms } switch (gnlh->cmd) { @@ -8,15 +8,15 @@ case NL80211_CMD_NEW_WIPHY: printf("renamed to %s\n", nla_get_string(tb[NL80211_ATTR_WIPHY_NAME])); break; -@@ -734,6 +735,7 @@ static int print_event(struct nl_msg *ms +@@ -979,6 +980,7 @@ static int print_event(struct nl_msg *ms case NL80211_CMD_SCHED_SCAN_RESULTS: printf("got scheduled scan results\n"); break; +#endif + case NL80211_CMD_WIPHY_REG_CHANGE: case NL80211_CMD_REG_CHANGE: - printf("regulatory domain change: "); - -@@ -812,6 +814,7 @@ static int print_event(struct nl_msg *ms + if (gnlh->cmd == NL80211_CMD_WIPHY_REG_CHANGE) +@@ -1061,6 +1063,7 @@ static int print_event(struct nl_msg *ms mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC])); printf("del station %s\n", macbuf); break; @@ -24,10 +24,10 @@ case NL80211_CMD_JOIN_IBSS: mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC])); printf("IBSS %s joined\n", macbuf); -@@ -989,9 +992,9 @@ static int print_event(struct nl_msg *ms - parse_nan_match(tb); +@@ -1254,9 +1257,9 @@ static int print_event(struct nl_msg *ms + case NL80211_CMD_CH_SWITCH_NOTIFY: + parse_ch_switch_notify(tb, gnlh->cmd); break; - } +#endif default: - printf("unknown event %d (%s)\n", @@ -38,7 +38,7 @@ --- a/info.c +++ b/info.c -@@ -164,6 +164,7 @@ static int print_phy_handler(struct nl_m +@@ -167,6 +167,7 @@ static int print_phy_handler(struct nl_m tb_band[NL80211_BAND_ATTR_VHT_MCS_SET]) print_vht_info(nla_get_u32(tb_band[NL80211_BAND_ATTR_VHT_CAPA]), nla_data(tb_band[NL80211_BAND_ATTR_VHT_MCS_SET])); @@ -46,7 +46,7 @@ if (tb_band[NL80211_BAND_ATTR_IFTYPE_DATA]) { struct nlattr *nl_iftype; int rem_band; -@@ -171,6 +172,7 @@ static int print_phy_handler(struct nl_m +@@ -174,6 +175,7 @@ static int print_phy_handler(struct nl_m nla_for_each_nested(nl_iftype, tb_band[NL80211_BAND_ATTR_IFTYPE_DATA], rem_band) print_he_info(nl_iftype); } @@ -54,7 +54,7 @@ if (tb_band[NL80211_BAND_ATTR_FREQS]) { if (!band_had_freq) { printf("\t\tFrequencies:\n"); -@@ -213,6 +215,7 @@ next: +@@ -216,6 +218,7 @@ next: } } @@ -62,7 +62,7 @@ if (tb_band[NL80211_BAND_ATTR_RATES]) { printf("\t\tBitrates (non-HT):\n"); nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) { -@@ -229,6 +232,7 @@ next: +@@ -232,6 +235,7 @@ next: printf("\n"); } } @@ -70,7 +70,7 @@ } } -@@ -294,6 +298,7 @@ next: +@@ -297,6 +301,7 @@ next: printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage); } @@ -78,7 +78,7 @@ if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) { int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32); int i; -@@ -305,6 +310,7 @@ next: +@@ -308,6 +313,7 @@ next: cipher_name(ciphers[i])); } } @@ -86,7 +86,7 @@ if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] && tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX]) -@@ -324,11 +330,13 @@ next: +@@ -327,11 +333,13 @@ next: printf("\t\t * %s\n", iftype_name(nla_type(nl_mode))); } @@ -100,7 +100,7 @@ if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) { struct nlattr *nl_combi; -@@ -425,6 +433,7 @@ broken_combination: +@@ -428,6 +436,7 @@ broken_combination: printf("\tinterface combinations are not supported\n"); } @@ -108,7 +108,7 @@ if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) { printf("\tSupported commands:\n"); nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd) -@@ -522,6 +531,7 @@ broken_combination: +@@ -525,6 +534,7 @@ broken_combination: printf("\t\t * wake up on TCP connection\n"); } } @@ -116,7 +116,7 @@ if (tb_msg[NL80211_ATTR_ROAM_SUPPORT]) printf("\tDevice supports roaming.\n"); -@@ -560,6 +570,7 @@ broken_combination: +@@ -563,6 +573,7 @@ broken_combination: } } @@ -124,7 +124,7 @@ if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) { unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]); -@@ -624,6 +635,7 @@ broken_combination: +@@ -627,6 +638,7 @@ broken_combination: if (features & NL80211_FEATURE_ND_RANDOM_MAC_ADDR) printf("\tDevice supports randomizing MAC-addr in net-detect scans.\n"); } @@ -132,7 +132,7 @@ if (tb_msg[NL80211_ATTR_TDLS_SUPPORT]) printf("\tDevice supports T-DLS.\n"); -@@ -732,6 +744,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP +@@ -762,6 +774,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP "List all wireless devices and their capabilities."); TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL); @@ -140,7 +140,7 @@ static int handle_commands(struct nl80211_state *state, struct nl_msg *msg, int argc, char **argv, enum id_input id) { -@@ -743,6 +756,7 @@ static int handle_commands(struct nl8021 +@@ -773,6 +786,7 @@ static int handle_commands(struct nl8021 } TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands, "list all known commands and their decimal & hex value"); @@ -150,7 +150,7 @@ { --- a/scan.c +++ b/scan.c -@@ -1195,6 +1195,9 @@ static void print_ht_op(const uint8_t ty +@@ -1297,6 +1297,9 @@ static void print_ht_op(const uint8_t ty printf("\t\t * secondary channel offset: %s\n", ht_secondary_offset[data[1] & 0x3]); printf("\t\t * STA channel width: %s\n", sta_chan_width[(data[1] & 0x4)>>2]); @@ -160,7 +160,7 @@ printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3); printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]); printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2); -@@ -1522,6 +1525,14 @@ static void print_ie(const struct ie_pri +@@ -1707,6 +1710,14 @@ static void print_ie(const struct ie_pri static const struct ie_print ieprinters[] = { [0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, @@ -175,12 +175,15 @@ [1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), }, [3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), }, [5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), }, -@@ -1531,21 +1542,15 @@ static const struct ie_print ieprinters[ +@@ -1716,26 +1727,20 @@ static const struct ie_print ieprinters[ [32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), }, [35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), }, [42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), }, - [45] = { "HT capabilities", print_ht_capa, 26, 26, BIT(PRINT_SCAN), }, [47] = { "ERP D4.0", print_erp, 1, 255, BIT(PRINT_SCAN), }, + [51] = { "AP Channel Report", print_ap_channel_report, 1, 255, BIT(PRINT_SCAN), }, + [59] = { "Supported operating classes", print_supp_op_classes, 1, 255, BIT(PRINT_SCAN), }, + [66] = { "Measurement Pilot Transmission", print_measurement_pilot_tx, 1, 255, BIT(PRINT_SCAN), }, [74] = { "Overlapping BSS scan params", print_obss_scan_params, 14, 255, BIT(PRINT_SCAN), }, - [61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), }, - [62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), }, @@ -188,17 +191,19 @@ - [192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), }, - [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), }, [50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), }, + [70] = { "RM enabled capabilities", print_rm_enabled_capabilities, 5, 5, BIT(PRINT_SCAN), }, [113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), }, - [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, [127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), }, [107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), }, [108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), }, - [111] = { "802.11u Roaming Consortium", print_11u_rcon, 0, 255, BIT(PRINT_SCAN), }, + [111] = { "802.11u Roaming Consortium", print_11u_rcon, 2, 255, BIT(PRINT_SCAN), }, + [195] = { "Transmit Power Envelope", print_tx_power_envelope, 2, 5, BIT(PRINT_SCAN), }, +#endif }; static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data, -@@ -2024,6 +2029,7 @@ void print_ies(unsigned char *ie, int ie +@@ -2279,6 +2284,7 @@ void print_ies(unsigned char *ie, int ie ieprinters[ie[0]].flags & BIT(ptype)) { print_ie(&ieprinters[ie[0]], ie[0], ie[1], ie + 2, &ie_buffer); @@ -206,7 +211,7 @@ } else if (ie[0] == 221 /* vendor */) { print_vendor(ie[1], ie + 2, unknown, ptype); } else if (unknown) { -@@ -2033,6 +2039,7 @@ void print_ies(unsigned char *ie, int ie +@@ -2288,6 +2294,7 @@ void print_ies(unsigned char *ie, int ie for (i=0; i [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [beacons ] [block-tx]\n" -@@ -727,3 +730,4 @@ COMMAND(switch, freq, - "Switch the operating channel by sending a channel switch announcement (CSA)."); - COMMAND(switch, channel, " [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz] [beacons ] [block-tx]", - NL80211_CMD_CHANNEL_SWITCH, 0, CIB_NETDEV, handle_chan, NULL); +@@ -956,3 +959,4 @@ COMMAND(set, tidconf, "[peer