From patchwork Tue Jul 21 22:52:47 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grygorii Strashko X-Patchwork-Id: 1333379 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=SFz2YKTh; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4BBDQF05Lsz9sSn for ; Wed, 22 Jul 2020 08:52:53 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726500AbgGUWww (ORCPT ); Tue, 21 Jul 2020 18:52:52 -0400 Received: from lelv0142.ext.ti.com ([198.47.23.249]:42666 "EHLO lelv0142.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726148AbgGUWwv (ORCPT ); Tue, 21 Jul 2020 18:52:51 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 06LMqoin129242; Tue, 21 Jul 2020 17:52:50 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1595371970; bh=W8/NLAP7AQ8ZoUh2X7uGYM9F/8jWUbu2kIHr9OgpfJQ=; h=From:To:CC:Subject:Date; b=SFz2YKTh5sVwtHGaXHR2Hi0sKBsFO7FKQ7i3CrZGwqRCMrUbrlpCZNA+FFnlnZ8CS Wa9vtL10+eQY0tL10yK27I58uvDFGmEkA5u5xlsGAYz83z4f7+QYN2EGg4VxCf3sAI k6VsJAFbeR7zryX1RRaIPPnPeJcmYC+3Be2o18oU= Received: from DLEE102.ent.ti.com (dlee102.ent.ti.com [157.170.170.32]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 06LMqo2f112472 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 21 Jul 2020 17:52:50 -0500 Received: from DLEE105.ent.ti.com (157.170.170.35) by DLEE102.ent.ti.com (157.170.170.32) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Tue, 21 Jul 2020 17:52:49 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE105.ent.ti.com (157.170.170.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Tue, 21 Jul 2020 17:52:49 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 06LMqm3l057785; Tue, 21 Jul 2020 17:52:48 -0500 From: Grygorii Strashko To: Kishon Vijay Abraham I , Rob Herring , CC: , Grygorii Strashko Subject: [PATCH] dt-bindings: phy: ti: phy-gmii-sel: convert bindings to json-schema Date: Wed, 22 Jul 2020 01:52:47 +0300 Message-ID: <20200721225247.31034-1-grygorii.strashko@ti.com> X-Mailer: git-send-email 2.17.1 MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert the CPSW Port's Interface Mode Selection PHY bindings documentation to json-schema. Signed-off-by: Grygorii Strashko --- .../bindings/phy/ti,phy-gmii-sel.yaml | 104 ++++++++++++++++++ .../bindings/phy/ti-phy-gmii-sel.txt | 69 ------------ 2 files changed, 104 insertions(+), 69 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml delete mode 100644 Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml new file mode 100644 index 000000000000..bcec422d7734 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: CPSW Port's Interface Mode Selection PHY Tree Bindings + +maintainers: + - Kishon Vijay Abraham I + +description: | + TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports + two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces. + The interface mode is selected by configuring the MII mode selection register(s) + (GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and + bit fields placement in SCM are different between SoCs while fields meaning + is the same. + +--------------+ + +-------------------------------+ |SCM | + | CPSW | | +---------+ | + | +--------------------------------+gmii_sel | | + | | | | +---------+ | + | +----v---+ +--------+ | +--------------+ + | |Port 1..<--+-->GMII/MII<-------> + | | | | | | | + | +--------+ | +--------+ | + | | | + | | +--------+ | + | | | RMII <-------> + | +--> | | + | | +--------+ | + | | | + | | +--------+ | + | | | RGMII <-------> + | +--> | | + | +--------+ | + +-------------------------------+ + + CPSW Port's Interface Mode Selection PHY describes MII interface mode between + CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration. + | + CPSW Port's Interface Mode Selection PHY device should defined as child device + of SCM node (scm_conf) and can be attached to each CPSW port node using standard + PHY bindings. + +properties: + compatible: + enum: + - ti,am3352-phy-gmii-sel + - ti,dra7xx-phy-gmii-sel + - ti,am43xx-phy-gmii-sel + - ti,dm814-phy-gmii-sel + - ti,am654-phy-gmii-sel + + reg: + description: Address and length of the register set for the device + + '#phy-cells': true + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,dra7xx-phy-gmii-sel + - ti,dm814-phy-gmii-sel + - ti,am654-phy-gmii-sel + then: + properties: + '#phy-cells': + const: 1 + description: CPSW port number (starting from 1) + - if: + properties: + compatible: + contains: + enum: + - ti,am3352-phy-gmii-sel + - ti,am43xx-phy-gmii-sel + then: + properties: + '#phy-cells': + const: 2 + description: | + - CPSW port number (starting from 1) + - RMII refclk mode + +required: + - compatible + - reg + - '#phy-cells' + +additionalProperties: false + +examples: + - | + phy_gmii_sel: phy-gmii-sel@650 { + compatible = "ti,am3352-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt b/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt deleted file mode 100644 index 83b78c1c0644..000000000000 --- a/Documentation/devicetree/bindings/phy/ti-phy-gmii-sel.txt +++ /dev/null @@ -1,69 +0,0 @@ -CPSW Port's Interface Mode Selection PHY Tree Bindings ------------------------------------------------ - -TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports -two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces. -The interface mode is selected by configuring the MII mode selection register(s) -(GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and -bit fields placement in SCM are different between SoCs while fields meaning -is the same. - +--------------+ - +-------------------------------+ |SCM | - | CPSW | | +---------+ | - | +--------------------------------+gmii_sel | | - | | | | +---------+ | - | +----v---+ +--------+ | +--------------+ - | |Port 1..<--+-->GMII/MII<-------> - | | | | | | | - | +--------+ | +--------+ | - | | | - | | +--------+ | - | | | RMII <-------> - | +--> | | - | | +--------+ | - | | | - | | +--------+ | - | | | RGMII <-------> - | +--> | | - | +--------+ | - +-------------------------------+ - -CPSW Port's Interface Mode Selection PHY describes MII interface mode between -CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration. - -CPSW Port's Interface Mode Selection PHY device should defined as child device -of SCM node (scm_conf) and can be attached to each CPSW port node using standard -PHY bindings (See phy/phy-bindings.txt). - -Required properties: -- compatible : Should be "ti,am3352-phy-gmii-sel" for am335x platform - "ti,dra7xx-phy-gmii-sel" for dra7xx/am57xx platform - "ti,am43xx-phy-gmii-sel" for am43xx platform - "ti,dm814-phy-gmii-sel" for dm814x platform - "ti,am654-phy-gmii-sel" for AM654x/J721E platform -- reg : Address and length of the register set for the device -- #phy-cells : must be 2. - cell 1 - CPSW port number (starting from 1) - cell 2 - RMII refclk mode - -Examples: - phy_gmii_sel: phy-gmii-sel { - compatible = "ti,am3352-phy-gmii-sel"; - reg = <0x650 0x4>; - #phy-cells = <2>; - }; - - mac: ethernet@4a100000 { - compatible = "ti,am335x-cpsw","ti,cpsw"; - ... - - cpsw_emac0: slave@4a100200 { - ... - phys = <&phy_gmii_sel 1 1>; - }; - - cpsw_emac1: slave@4a100300 { - ... - phys = <&phy_gmii_sel 2 1>; - }; - };