From patchwork Thu May 28 14:05:44 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ricardo Rivera-Matos X-Patchwork-Id: 1299830 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=xEyrstiZ; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 49XqJ84GjCz9sSr for ; Fri, 29 May 2020 00:06:48 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2390919AbgE1OGZ (ORCPT ); Thu, 28 May 2020 10:06:25 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:51866 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2390716AbgE1OGY (ORCPT ); Thu, 28 May 2020 10:06:24 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 04SE6MAQ054763; Thu, 28 May 2020 09:06:22 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1590674782; bh=Vbdg/biSgd829na/47dsXhxDsqjAyaONz7A5IPBZtEE=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=xEyrstiZFUXUbZJ4XaVJzXFZoVYenWIJe3nd2sbHcuDf/EjWJBx9/DyWivxgZxyaP F3/AmbF2dOfJTlKnfgPfkVq1hdnr6wZOY2gYedEB2RyFaWKDtekKoudctTg8TaiMic BovAwHnVJ1kOGxvv18UqiXNxRXHtv4L8mjTUPBmc= Received: from DLEE108.ent.ti.com (dlee108.ent.ti.com [157.170.170.38]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 04SE6MX3130606 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Thu, 28 May 2020 09:06:22 -0500 Received: from DLEE104.ent.ti.com (157.170.170.34) by DLEE108.ent.ti.com (157.170.170.38) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Thu, 28 May 2020 09:06:21 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DLEE104.ent.ti.com (157.170.170.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Thu, 28 May 2020 09:06:21 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id 04SE6L2s074603; Thu, 28 May 2020 09:06:21 -0500 From: Ricardo Rivera-Matos To: , , CC: , , , , , , Subject: [PATCH v11 2/4] dt-bindings: power: Convert battery.txt to battery.yaml Date: Thu, 28 May 2020 09:05:44 -0500 Message-ID: <20200528140546.25260-3-r-rivera-matos@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200528140546.25260-1-r-rivera-matos@ti.com> References: <20200528140546.25260-1-r-rivera-matos@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Dan Murphy Convert the battery.txt file to yaml and fix up the examples. Signed-off-by: Dan Murphy --- .../bindings/power/supply/battery.txt | 82 +--------- .../bindings/power/supply/battery.yaml | 143 ++++++++++++++++++ 2 files changed, 144 insertions(+), 81 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/supply/battery.yaml diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt index 3049cf88bdcf..b9a81621ce59 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.txt +++ b/Documentation/devicetree/bindings/power/supply/battery.txt @@ -1,81 +1 @@ -Battery Characteristics - -The devicetree battery node provides static battery characteristics. -In smart batteries, these are typically stored in non-volatile memory -on a fuel gauge chip. The battery node should be used where there is -no appropriate non-volatile memory, or it is unprogrammed/incorrect. - -Upstream dts files should not include battery nodes, unless the battery -represented cannot easily be replaced in the system by one of a -different type. This prevents unpredictable, potentially harmful, -behavior should a replacement that changes the battery type occur -without a corresponding update to the dtb. - -Required Properties: - - compatible: Must be "simple-battery" - -Optional Properties: - - voltage-min-design-microvolt: drained battery voltage - - voltage-max-design-microvolt: fully charged battery voltage - - energy-full-design-microwatt-hours: battery design energy - - charge-full-design-microamp-hours: battery design capacity - - precharge-current-microamp: current for pre-charge phase - - charge-term-current-microamp: current for charge termination phase - - constant-charge-current-max-microamp: maximum constant input current - - constant-charge-voltage-max-microvolt: maximum constant input voltage - - factory-internal-resistance-micro-ohms: battery factory internal resistance - - ocv-capacity-table-0: An array providing the open circuit voltage (OCV) - of the battery and corresponding battery capacity percent, which is used - to look up battery capacity according to current OCV value. And the open - circuit voltage unit is microvolt. - - ocv-capacity-table-1: Same as ocv-capacity-table-0 - ...... - - ocv-capacity-table-n: Same as ocv-capacity-table-0 - - ocv-capacity-celsius: An array containing the temperature in degree Celsius, - for each of the battery capacity lookup table. The first temperature value - specifies the OCV table 0, and the second temperature value specifies the - OCV table 1, and so on. - - resistance-temp-table: An array providing the temperature in degree Celsius - and corresponding battery internal resistance percent, which is used to look - up the resistance percent according to current temperature to get a accurate - batterty internal resistance in different temperatures. - -Battery properties are named, where possible, for the corresponding -elements in enum power_supply_property, defined in -https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h - -Batteries must be referenced by chargers and/or fuel-gauges -using a phandle. The phandle's property should be named -"monitored-battery". - -Example: - - bat: battery { - compatible = "simple-battery"; - voltage-min-design-microvolt = <3200000>; - voltage-max-design-microvolt = <4200000>; - energy-full-design-microwatt-hours = <5290000>; - charge-full-design-microamp-hours = <1430000>; - precharge-current-microamp = <256000>; - charge-term-current-microamp = <128000>; - constant-charge-current-max-microamp = <900000>; - constant-charge-voltage-max-microvolt = <4200000>; - factory-internal-resistance-micro-ohms = <250000>; - ocv-capacity-celsius = <(-10) 0 10>; - ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...; - ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...; - ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...; - resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>; - }; - - charger: charger@11 { - .... - monitored-battery = <&bat>; - ... - }; - - fuel_gauge: fuel-gauge@22 { - .... - monitored-battery = <&bat>; - ... - }; +The contents of this file has been moved to battery.yaml diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml new file mode 100644 index 000000000000..f0b544a22219 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/battery.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery Characteristics + +maintainers: + - Sebastian Reichel + +description: | + The devicetree battery node provides static battery characteristics. + In smart batteries, these are typically stored in non-volatile memory + on a fuel gauge chip. The battery node should be used where there is + no appropriate non-volatile memory, or it is unprogrammed/incorrect. + + Upstream dts files should not include battery nodes, unless the battery + represented cannot easily be replaced in the system by one of a + different type. This prevents unpredictable, potentially harmful, + behavior should a replacement that changes the battery type occur + without a corresponding update to the dtb. + + Battery properties are named, where possible, for the corresponding elements + in enum power_supply_property, defined in include/linux/power_supply.h + + Batteries must be referenced by chargers and/or fuel-gauges using a phandle. + The phandle's property should be named "monitored-battery". + +properties: + compatible: + const: simple-battery + + voltage-min-design-microvolt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: drained battery voltage + + voltage-max-design-microvolt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: fully charged battery voltage + + energy-full-design-microwatt-hours: + $ref: /schemas/types.yaml#/definitions/uint32 + description: battery design energy + + charge-full-design-microamp-hours: + $ref: /schemas/types.yaml#/definitions/uint32 + description: battery design capacity + + precharge-current-microamp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: current for pre-charge phase + + charge-term-current-microamp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: current for charge termination phase + + constant-charge-current-max-microamp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum constant input current + + constant-charge-voltage-max-microvolt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum constant input voltage + + factory-internal-resistance-micro-ohms: + $ref: /schemas/types.yaml#/definitions/uint32 + description: battery factory internal resistance + + ocv-capacity-table-0: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + An array providing the open circuit voltage (OCV) + of the battery and corresponding battery capacity percent, which is used + to look up battery capacity according to current OCV value. And the open + circuit voltage unit is microvolt. + + ocv-capacity-table-1: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: Same as ocv-capacity-table-0 + + ocv-capacity-table-n: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: Same as ocv-capacity-table-0 + + ocv-capacity-celsius: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + An array containing the temperature in degree Celsius, + for each of the battery capacity lookup table. The first temperature value + specifies the OCV table 0, and the second temperature value specifies the + OCV table 1, and so on. + + resistance-temp-table: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + An array providing the temperature in degree Celsius + and corresponding battery internal resistance percent, which is used to + look up the resistance percent according to current temperature to get an + accurate batterty internal resistance in different temperatures. + + monitored-battery: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the battery node being monitored + +required: + - compatible + +additionalProperties: false + +examples: + - | + power { + #address-cells = <1>; + #size-cells = <0>; + + battery:battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3200000>; + voltage-max-design-microvolt = <4200000>; + energy-full-design-microwatt-hours = <5290000>; + charge-full-design-microamp-hours = <1430000>; + precharge-current-microamp = <256000>; + charge-term-current-microamp = <128000>; + constant-charge-current-max-microamp = <900000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <250000>; + ocv-capacity-celsius = <(-10) 0 10>; + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>; + ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>; + resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>; + }; + + charger:charger@11 { + reg = <0x11>; + monitored-battery = <&battery>; + }; + + fuel_gauge:fuel-gauge@22 { + reg = <0x22>; + monitored-battery = <&battery>; + }; + }; From patchwork Thu May 28 14:05:45 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ricardo Rivera-Matos X-Patchwork-Id: 1299829 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=L82mIVS+; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 49XqHl2B3cz9sRY for ; Fri, 29 May 2020 00:06:27 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2390656AbgE1OGZ (ORCPT ); Thu, 28 May 2020 10:06:25 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:51868 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2390911AbgE1OGY (ORCPT ); Thu, 28 May 2020 10:06:24 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 04SE6M1M054768; Thu, 28 May 2020 09:06:22 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1590674782; bh=NwzbfBxZO6Fv/RgiI97+y9ukXOLrBcZkNusGCGUythU=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=L82mIVS+rjzDKwxYywbgKCFk3jm84qf8zWRF+z9sWSo20xVZr+ZuFA9kzq0QsEAcF NPy51XNXb92PysNtOua9CkpYv/T9C4ycMpCeprbozGdmFYLqH2wiA0ia04+LIVz0BW nViFTS668dS1LTKGqNS0g+IQ/h/PgC+IbxT03ypM= Received: from DLEE108.ent.ti.com (dlee108.ent.ti.com [157.170.170.38]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 04SE6M3U024284; Thu, 28 May 2020 09:06:22 -0500 Received: from DLEE107.ent.ti.com (157.170.170.37) by DLEE108.ent.ti.com (157.170.170.38) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Thu, 28 May 2020 09:06:21 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE107.ent.ti.com (157.170.170.37) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Thu, 28 May 2020 09:06:21 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 04SE6LB4058024; Thu, 28 May 2020 09:06:21 -0500 From: Ricardo Rivera-Matos To: , , CC: , , , , , , Subject: [PATCH v11 3/4] dt-bindings: power: Add the bindings for the bq2515x family of chargers. Date: Thu, 28 May 2020 09:05:45 -0500 Message-ID: <20200528140546.25260-4-r-rivera-matos@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200528140546.25260-1-r-rivera-matos@ti.com> References: <20200528140546.25260-1-r-rivera-matos@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The BQ2515X family of devices are highly integrated battery management ICs that integrate the most common functions for wearable devices namely a charger, an output voltage rail, ADC for battery and system monitoring, and a push-button controller. Datasheets: http://www.ti.com/lit/ds/symlink/bq25150.pdf http://www.ti.com/lit/ds/symlink/bq25155.pdf Signed-off-by: Ricardo Rivera-Matos --- .../bindings/power/supply/bq2515x.yaml | 91 +++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/bq2515x.yaml diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml new file mode 100644 index 000000000000..19cb336d581e --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/bq2515x.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI bq2515x 500-mA Linear charger family + +maintainers: + - Dan Murphy + - Ricardo Rivera-Matos + +description: | + The BQ2515x family is a highly integrated battery charge management IC that + integrates the most common functions for wearable devices, namely a charger, + an output voltage rail, ADC for battery and system monitoring, and + push-button controller. + + Specifications about the charger can be found at: + http://www.ti.com/lit/ds/symlink/bq25150.pdf + http://www.ti.com/lit/ds/symlink/bq25155.pdf + +properties: + compatible: + enum: + - ti,bq25150 + - ti,bq25155 + + reg: + maxItems: 1 + description: I2C address of the charger. + + ac-detect-gpios: + description: | + GPIO used for connecting the bq2515x device PG (AC Detect) + pin. + maxItems: 1 + + reset-gpios: + description: GPIO used for hardware reset. + maxItems: 1 + + powerdown-gpios: + description: GPIO used for low power mode of IC. + maxItems: 1 + + charge-enable-gpios: + description: GPIO used to turn on and off charging. + maxItems: 1 + + input-current-limit-microamp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Maximum input current in micro Amps. + minimum: 50000 + maximum: 500000 + + monitored-battery: + $ref: battery.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bat: battery { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <50000>; + precharge-current-microamp = <2500>; + constant-charge-voltage-max-microvolt = <4000000>; + }; + #include + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + bq25150: charger@6b { + compatible = "ti,bq25150"; + reg = <0x6b>; + monitored-battery = <&bat>; + input-current-limit-microamp = <100000>; + + ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + };