From patchwork Wed Oct 23 12:47:05 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 1182135 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=nxp.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 46yqsC4NkZz9sNw for ; Wed, 23 Oct 2019 23:47:27 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2391774AbfJWMr0 (ORCPT ); Wed, 23 Oct 2019 08:47:26 -0400 Received: from inva020.nxp.com ([92.121.34.13]:56894 "EHLO inva020.nxp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2390384AbfJWMr0 (ORCPT ); Wed, 23 Oct 2019 08:47:26 -0400 Received: from inva020.nxp.com (localhost [127.0.0.1]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 4F7991A0716; Wed, 23 Oct 2019 14:47:24 +0200 (CEST) Received: from inva024.eu-rdc02.nxp.com (inva024.eu-rdc02.nxp.com [134.27.226.22]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 4306C1A0020; Wed, 23 Oct 2019 14:47:24 +0200 (CEST) Received: from fsr-ub1464-137.ea.freescale.net (fsr-ub1464-137.ea.freescale.net [10.171.82.114]) by inva024.eu-rdc02.nxp.com (Postfix) with ESMTP id E818E205FE; Wed, 23 Oct 2019 14:47:23 +0200 (CEST) From: Ioana Ciornei To: davem@davemloft.net, netdev@vger.kernel.org Cc: laurentiu.tudor@nxp.com, andrew@lunn.ch, f.fainelli@gmail.com, linux@armlinux.org.uk, Ioana Ciornei Subject: [PATCH net-next v2 1/5] bus: fsl-mc: export device types present on the bus Date: Wed, 23 Oct 2019 15:47:05 +0300 Message-Id: <1571834829-29560-2-git-send-email-ioana.ciornei@nxp.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> References: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> Reply-to: ioana.ciornei@nxp.com X-Virus-Scanned: ClamAV using ClamSMTP Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Export all device types present on the fsl-mc bus in order to be able to actually use the is_fsl_mc_bus_*() functions from drivers on the bus. Signed-off-by: Ioana Ciornei --- Changes in v2: - patch added drivers/bus/fsl-mc/fsl-mc-bus.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c b/drivers/bus/fsl-mc/fsl-mc-bus.c index 5c9bf2e06552..bb3c2fc7c5ba 100644 --- a/drivers/bus/fsl-mc/fsl-mc-bus.c +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c @@ -166,42 +166,52 @@ struct bus_type fsl_mc_bus_type = { struct device_type fsl_mc_bus_dprc_type = { .name = "fsl_mc_bus_dprc" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dprc_type); struct device_type fsl_mc_bus_dpni_type = { .name = "fsl_mc_bus_dpni" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dpni_type); struct device_type fsl_mc_bus_dpio_type = { .name = "fsl_mc_bus_dpio" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dpio_type); struct device_type fsl_mc_bus_dpsw_type = { .name = "fsl_mc_bus_dpsw" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dpsw_type); struct device_type fsl_mc_bus_dpbp_type = { .name = "fsl_mc_bus_dpbp" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dpbp_type); struct device_type fsl_mc_bus_dpcon_type = { .name = "fsl_mc_bus_dpcon" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dpcon_type); struct device_type fsl_mc_bus_dpmcp_type = { .name = "fsl_mc_bus_dpmcp" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dpmcp_type); struct device_type fsl_mc_bus_dpmac_type = { .name = "fsl_mc_bus_dpmac" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dpmac_type); struct device_type fsl_mc_bus_dprtc_type = { .name = "fsl_mc_bus_dprtc" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dprtc_type); struct device_type fsl_mc_bus_dpseci_type = { .name = "fsl_mc_bus_dpseci" }; +EXPORT_SYMBOL_GPL(fsl_mc_bus_dpseci_type); static struct device_type *fsl_mc_get_device_type(const char *type) { From patchwork Wed Oct 23 12:47:06 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 1182136 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=nxp.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 46yqsD4MDVz9sPk for ; Wed, 23 Oct 2019 23:47:28 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2405277AbfJWMr1 (ORCPT ); Wed, 23 Oct 2019 08:47:27 -0400 Received: from inva020.nxp.com ([92.121.34.13]:56912 "EHLO inva020.nxp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2390489AbfJWMr0 (ORCPT ); Wed, 23 Oct 2019 08:47:26 -0400 Received: from inva020.nxp.com (localhost [127.0.0.1]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id A5AEF1A0067; Wed, 23 Oct 2019 14:47:24 +0200 (CEST) Received: from inva024.eu-rdc02.nxp.com (inva024.eu-rdc02.nxp.com [134.27.226.22]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 988B51A0020; Wed, 23 Oct 2019 14:47:24 +0200 (CEST) Received: from fsr-ub1464-137.ea.freescale.net (fsr-ub1464-137.ea.freescale.net [10.171.82.114]) by inva024.eu-rdc02.nxp.com (Postfix) with ESMTP id 51587205FE; Wed, 23 Oct 2019 14:47:24 +0200 (CEST) From: Ioana Ciornei To: davem@davemloft.net, netdev@vger.kernel.org Cc: laurentiu.tudor@nxp.com, andrew@lunn.ch, f.fainelli@gmail.com, linux@armlinux.org.uk, Ioana Ciornei Subject: [PATCH net-next v2 2/5] bus: fsl-mc: add the fsl_mc_get_endpoint function Date: Wed, 23 Oct 2019 15:47:06 +0300 Message-Id: <1571834829-29560-3-git-send-email-ioana.ciornei@nxp.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> References: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> Reply-to: ioana.ciornei@nxp.com X-Virus-Scanned: ClamAV using ClamSMTP Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Using the newly added fsl_mc_get_endpoint function a fsl-mc driver can find its associated endpoint (another object at the other link of a MC firmware link). The API will be used in the following patch in order to discover the connected DPMAC object of a DPNI. Also, the fsl_mc_device_lookup function is made available to the entire fsl-mc bus driver and not just for the dprc driver. Signed-off-by: Ioana Ciornei --- Changes in v2: - use ENOTCONN instead of EINVAL drivers/bus/fsl-mc/dprc-driver.c | 6 ++--- drivers/bus/fsl-mc/dprc.c | 53 +++++++++++++++++++++++++++++++++++++ drivers/bus/fsl-mc/fsl-mc-bus.c | 33 +++++++++++++++++++++++ drivers/bus/fsl-mc/fsl-mc-private.h | 42 +++++++++++++++++++++++++++++ include/linux/fsl/mc.h | 2 ++ 5 files changed, 132 insertions(+), 4 deletions(-) diff --git a/drivers/bus/fsl-mc/dprc-driver.c b/drivers/bus/fsl-mc/dprc-driver.c index 52c7e15143d6..c8b1c3842c1a 100644 --- a/drivers/bus/fsl-mc/dprc-driver.c +++ b/drivers/bus/fsl-mc/dprc-driver.c @@ -104,10 +104,8 @@ static int __fsl_mc_device_match(struct device *dev, void *data) return fsl_mc_device_match(mc_dev, obj_desc); } -static struct fsl_mc_device *fsl_mc_device_lookup(struct fsl_mc_obj_desc - *obj_desc, - struct fsl_mc_device - *mc_bus_dev) +struct fsl_mc_device *fsl_mc_device_lookup(struct fsl_mc_obj_desc *obj_desc, + struct fsl_mc_device *mc_bus_dev) { struct device *dev; diff --git a/drivers/bus/fsl-mc/dprc.c b/drivers/bus/fsl-mc/dprc.c index 0fe3f52ae0de..602f030d84eb 100644 --- a/drivers/bus/fsl-mc/dprc.c +++ b/drivers/bus/fsl-mc/dprc.c @@ -554,3 +554,56 @@ int dprc_get_container_id(struct fsl_mc_io *mc_io, return 0; } + +/** + * dprc_get_connection() - Get connected endpoint and link status if connection + * exists. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPRC object + * @endpoint1: Endpoint 1 configuration parameters + * @endpoint2: Returned endpoint 2 configuration parameters + * @state: Returned link state: + * 1 - link is up; + * 0 - link is down; + * -1 - no connection (endpoint2 information is irrelevant) + * + * Return: '0' on Success; -ENOTCONN if connection does not exist. + */ +int dprc_get_connection(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dprc_endpoint *endpoint1, + struct dprc_endpoint *endpoint2, + int *state) +{ + struct dprc_cmd_get_connection *cmd_params; + struct dprc_rsp_get_connection *rsp_params; + struct fsl_mc_command cmd = { 0 }; + int err, i; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPRC_CMDID_GET_CONNECTION, + cmd_flags, + token); + cmd_params = (struct dprc_cmd_get_connection *)cmd.params; + cmd_params->ep1_id = cpu_to_le32(endpoint1->id); + cmd_params->ep1_interface_id = cpu_to_le16(endpoint1->if_id); + for (i = 0; i < 16; i++) + cmd_params->ep1_type[i] = endpoint1->type[i]; + + /* send command to mc */ + err = mc_send_command(mc_io, &cmd); + if (err) + return -ENOTCONN; + + /* retrieve response parameters */ + rsp_params = (struct dprc_rsp_get_connection *)cmd.params; + endpoint2->id = le32_to_cpu(rsp_params->ep2_id); + endpoint2->if_id = le16_to_cpu(rsp_params->ep2_interface_id); + *state = le32_to_cpu(rsp_params->state); + for (i = 0; i < 16; i++) + endpoint2->type[i] = rsp_params->ep2_type[i]; + + return 0; +} diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c b/drivers/bus/fsl-mc/fsl-mc-bus.c index bb3c2fc7c5ba..6412d887b36b 100644 --- a/drivers/bus/fsl-mc/fsl-mc-bus.c +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c @@ -712,6 +712,39 @@ void fsl_mc_device_remove(struct fsl_mc_device *mc_dev) } EXPORT_SYMBOL_GPL(fsl_mc_device_remove); +struct fsl_mc_device *fsl_mc_get_endpoint(struct fsl_mc_device *mc_dev) +{ + struct fsl_mc_device *mc_bus_dev, *endpoint; + struct fsl_mc_obj_desc endpoint_desc = { 0 }; + struct dprc_endpoint endpoint1 = { 0 }; + struct dprc_endpoint endpoint2 = { 0 }; + int state, err; + + mc_bus_dev = to_fsl_mc_device(mc_dev->dev.parent); + strcpy(endpoint1.type, mc_dev->obj_desc.type); + endpoint1.id = mc_dev->obj_desc.id; + + err = dprc_get_connection(mc_bus_dev->mc_io, 0, + mc_bus_dev->mc_handle, + &endpoint1, &endpoint2, + &state); + + if (err == -ENOTCONN || state == -1) + return NULL; + + if (err < 0) { + dev_err(&mc_bus_dev->dev, "dprc_get_connection() = %d\n", err); + return NULL; + } + + strcpy(endpoint_desc.type, endpoint2.type); + endpoint_desc.id = endpoint2.id; + endpoint = fsl_mc_device_lookup(&endpoint_desc, mc_bus_dev); + + return endpoint; +} +EXPORT_SYMBOL_GPL(fsl_mc_get_endpoint); + static int parse_mc_ranges(struct device *dev, int *paddr_cells, int *mc_addr_cells, diff --git a/drivers/bus/fsl-mc/fsl-mc-private.h b/drivers/bus/fsl-mc/fsl-mc-private.h index 020fcc04ec8b..21ca8c756ee7 100644 --- a/drivers/bus/fsl-mc/fsl-mc-private.h +++ b/drivers/bus/fsl-mc/fsl-mc-private.h @@ -105,6 +105,8 @@ int dpmcp_reset(struct fsl_mc_io *mc_io, #define DPRC_CMDID_GET_OBJ_REG_V2 DPRC_CMD_V2(0x15E) #define DPRC_CMDID_SET_OBJ_IRQ DPRC_CMD(0x15F) +#define DPRC_CMDID_GET_CONNECTION DPRC_CMD(0x16C) + struct dprc_cmd_open { __le32 container_id; }; @@ -228,6 +230,22 @@ struct dprc_cmd_set_obj_irq { u8 obj_type[16]; }; +struct dprc_cmd_get_connection { + __le32 ep1_id; + __le16 ep1_interface_id; + u8 pad[2]; + u8 ep1_type[16]; +}; + +struct dprc_rsp_get_connection { + __le64 pad[3]; + __le32 ep2_id; + __le16 ep2_interface_id; + __le16 pad1; + u8 ep2_type[16]; + __le32 state; +}; + /* * DPRC API for managing and querying DPAA resources */ @@ -392,6 +410,27 @@ int dprc_get_container_id(struct fsl_mc_io *mc_io, u32 cmd_flags, int *container_id); +/** + * struct dprc_endpoint - Endpoint description for link connect/disconnect + * operations + * @type: Endpoint object type: NULL terminated string + * @id: Endpoint object ID + * @if_id: Interface ID; should be set for endpoints with multiple + * interfaces ("dpsw", "dpdmux"); for others, always set to 0 + */ +struct dprc_endpoint { + char type[16]; + int id; + u16 if_id; +}; + +int dprc_get_connection(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dprc_endpoint *endpoint1, + struct dprc_endpoint *endpoint2, + int *state); + /* * Data Path Buffer Pool (DPBP) API */ @@ -574,4 +613,7 @@ int __must_check fsl_create_mc_io(struct device *dev, bool fsl_mc_is_root_dprc(struct device *dev); +struct fsl_mc_device *fsl_mc_device_lookup(struct fsl_mc_obj_desc *obj_desc, + struct fsl_mc_device *mc_bus_dev); + #endif /* _FSL_MC_PRIVATE_H_ */ diff --git a/include/linux/fsl/mc.h b/include/linux/fsl/mc.h index 975553a9f75d..54d9436600c7 100644 --- a/include/linux/fsl/mc.h +++ b/include/linux/fsl/mc.h @@ -403,6 +403,8 @@ struct irq_domain *fsl_mc_msi_create_irq_domain(struct fwnode_handle *fwnode, void fsl_mc_free_irqs(struct fsl_mc_device *mc_dev); +struct fsl_mc_device *fsl_mc_get_endpoint(struct fsl_mc_device *mc_dev); + extern struct bus_type fsl_mc_bus_type; extern struct device_type fsl_mc_bus_dprc_type; From patchwork Wed Oct 23 12:47:07 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 1182139 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=nxp.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 46yqsK40Jsz9sNw for ; Wed, 23 Oct 2019 23:47:33 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2405361AbfJWMrc (ORCPT ); Wed, 23 Oct 2019 08:47:32 -0400 Received: from inva021.nxp.com ([92.121.34.21]:60780 "EHLO inva021.nxp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2390892AbfJWMr1 (ORCPT ); Wed, 23 Oct 2019 08:47:27 -0400 Received: from inva021.nxp.com (localhost [127.0.0.1]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 0F45B20025E; Wed, 23 Oct 2019 14:47:25 +0200 (CEST) Received: from inva024.eu-rdc02.nxp.com (inva024.eu-rdc02.nxp.com [134.27.226.22]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 01619200212; Wed, 23 Oct 2019 14:47:25 +0200 (CEST) Received: from fsr-ub1464-137.ea.freescale.net (fsr-ub1464-137.ea.freescale.net [10.171.82.114]) by inva024.eu-rdc02.nxp.com (Postfix) with ESMTP id A6DA0205FE; Wed, 23 Oct 2019 14:47:24 +0200 (CEST) From: Ioana Ciornei To: davem@davemloft.net, netdev@vger.kernel.org Cc: laurentiu.tudor@nxp.com, andrew@lunn.ch, f.fainelli@gmail.com, linux@armlinux.org.uk, Ioana Ciornei Subject: [PATCH net-next v2 3/5] dpaa2-eth: update the TX frame queues on DPNI_IRQ_EVENT_ENDPOINT_CHANGED Date: Wed, 23 Oct 2019 15:47:07 +0300 Message-Id: <1571834829-29560-4-git-send-email-ioana.ciornei@nxp.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> References: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> Reply-to: ioana.ciornei@nxp.com X-Virus-Scanned: ClamAV using ClamSMTP Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Currently the function is called at every link up event, although the FQID values will only change when the DPNI is disconnected from the current object and reconnected to a different one. The patch also avoids the forward declaration of update_tx_fqids. Signed-off-by: Ioana Ciornei --- Changes in v2: - none drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 90fc79b3fd0a..602d5118e928 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -1255,8 +1255,6 @@ static void dpaa2_eth_set_rx_taildrop(struct dpaa2_eth_priv *priv, bool enable) priv->rx_td_enabled = enable; } -static void update_tx_fqids(struct dpaa2_eth_priv *priv); - static int link_state_update(struct dpaa2_eth_priv *priv) { struct dpni_link_state state = {0}; @@ -1283,7 +1281,6 @@ static int link_state_update(struct dpaa2_eth_priv *priv) goto out; if (state.up) { - update_tx_fqids(priv); netif_carrier_on(priv->net_dev); netif_tx_start_all_queues(priv->net_dev); } else { @@ -3363,8 +3360,10 @@ static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg) if (status & DPNI_IRQ_EVENT_LINK_CHANGED) link_state_update(netdev_priv(net_dev)); - if (status & DPNI_IRQ_EVENT_ENDPOINT_CHANGED) + if (status & DPNI_IRQ_EVENT_ENDPOINT_CHANGED) { set_mac_addr(netdev_priv(net_dev)); + update_tx_fqids(priv); + } return IRQ_HANDLED; } From patchwork Wed Oct 23 12:47:08 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 1182140 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=nxp.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 46yqsP3hsMz9sNw for ; Wed, 23 Oct 2019 23:47:37 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2405369AbfJWMrg (ORCPT ); Wed, 23 Oct 2019 08:47:36 -0400 Received: from inva021.nxp.com ([92.121.34.21]:60794 "EHLO inva021.nxp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2390945AbfJWMrd (ORCPT ); Wed, 23 Oct 2019 08:47:33 -0400 Received: from inva021.nxp.com (localhost [127.0.0.1]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 7714120025D; Wed, 23 Oct 2019 14:47:25 +0200 (CEST) Received: from inva024.eu-rdc02.nxp.com (inva024.eu-rdc02.nxp.com [134.27.226.22]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 65DAB200212; Wed, 23 Oct 2019 14:47:25 +0200 (CEST) Received: from fsr-ub1464-137.ea.freescale.net (fsr-ub1464-137.ea.freescale.net [10.171.82.114]) by inva024.eu-rdc02.nxp.com (Postfix) with ESMTP id 0F8B7205FE; Wed, 23 Oct 2019 14:47:25 +0200 (CEST) From: Ioana Ciornei To: davem@davemloft.net, netdev@vger.kernel.org Cc: laurentiu.tudor@nxp.com, andrew@lunn.ch, f.fainelli@gmail.com, linux@armlinux.org.uk, Ioana Ciornei Subject: [PATCH net-next v2 4/5] dpaa2-eth: add MAC/PHY support through phylink Date: Wed, 23 Oct 2019 15:47:08 +0300 Message-Id: <1571834829-29560-5-git-send-email-ioana.ciornei@nxp.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> References: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> Reply-to: ioana.ciornei@nxp.com X-Virus-Scanned: ClamAV using ClamSMTP Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org The dpaa2-eth driver now has support for connecting to its associated PHY device found through standard OF bindings. This happens when the DPNI object (that the driver probes on) gets connected to a DPMAC. When that happens, the device tree is looked up by the DPMAC ID, and the associated PHY bindings are found. The old logic of handling the net device's link state by hand still needs to be kept, as the DPNI can be connected to other devices on the bus than a DPMAC: other DPNI, DPSW ports, etc. This logic is only engaged when there is no DPMAC (and therefore no phylink instance) attached. The MC firmware support multiple type of DPMAC links: TYPE_FIXED, TYPE_PHY. The TYPE_FIXED mode does not require any DPMAC management from Linux side, and as such, the driver will not handle such a DPMAC. Although PHYLINK typically handles SFP cages and in-band AN modes, for the moment the driver only supports the RGMII interfaces found on the LX2160A. Support for other modes will come later. Signed-off-by: Ioana Ciornei --- Changes in v2: - move the locks to rtnl outside of dpaa2_eth_[dis]connect_mac functions - remove setting supported/advertised from .validate() MAINTAINERS | 2 + drivers/net/ethernet/freescale/dpaa2/Makefile | 2 +- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 117 ++++++-- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 3 + .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 25 ++ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 302 +++++++++++++++++++++ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h | 32 +++ drivers/net/ethernet/freescale/dpaa2/dpmac-cmd.h | 62 +++++ drivers/net/ethernet/freescale/dpaa2/dpmac.c | 149 ++++++++++ drivers/net/ethernet/freescale/dpaa2/dpmac.h | 144 ++++++++++ 10 files changed, 817 insertions(+), 21 deletions(-) create mode 100644 drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c create mode 100644 drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h create mode 100644 drivers/net/ethernet/freescale/dpaa2/dpmac-cmd.h create mode 100644 drivers/net/ethernet/freescale/dpaa2/dpmac.c create mode 100644 drivers/net/ethernet/freescale/dpaa2/dpmac.h diff --git a/MAINTAINERS b/MAINTAINERS index aaa6ee71c000..d0e562d3ce5b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5046,7 +5046,9 @@ M: Ioana Radulescu L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/freescale/dpaa2/dpaa2-eth* +F: drivers/net/ethernet/freescale/dpaa2/dpaa2-mac* F: drivers/net/ethernet/freescale/dpaa2/dpni* +F: drivers/net/ethernet/freescale/dpaa2/dpmac* F: drivers/net/ethernet/freescale/dpaa2/dpkg.h F: drivers/net/ethernet/freescale/dpaa2/Makefile F: drivers/net/ethernet/freescale/dpaa2/Kconfig diff --git a/drivers/net/ethernet/freescale/dpaa2/Makefile b/drivers/net/ethernet/freescale/dpaa2/Makefile index d1e78cdd512f..69184ca3b7b9 100644 --- a/drivers/net/ethernet/freescale/dpaa2/Makefile +++ b/drivers/net/ethernet/freescale/dpaa2/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_FSL_DPAA2_ETH) += fsl-dpaa2-eth.o obj-$(CONFIG_FSL_DPAA2_PTP_CLOCK) += fsl-dpaa2-ptp.o -fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o +fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o dpaa2-mac.o dpmac.o fsl-dpaa2-eth-${CONFIG_DEBUG_FS} += dpaa2-eth-debugfs.o fsl-dpaa2-ptp-objs := dpaa2-ptp.o dprtc.o diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index 602d5118e928..35288a5d231d 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* Copyright 2014-2016 Freescale Semiconductor Inc. - * Copyright 2016-2017 NXP + * Copyright 2016-2019 NXP */ #include #include @@ -1276,6 +1276,12 @@ static int link_state_update(struct dpaa2_eth_priv *priv) !!(state.options & DPNI_LINK_OPT_ASYM_PAUSE); dpaa2_eth_set_rx_taildrop(priv, !tx_pause); + /* When we manage the MAC/PHY using phylink there is no need + * to manually update the netif_carrier. + */ + if (priv->mac) + goto out; + /* Chech link state; speed / duplex changes are not treated yet */ if (priv->link_state.up == state.up) goto out; @@ -1312,17 +1318,21 @@ static int dpaa2_eth_open(struct net_device *net_dev) priv->dpbp_dev->obj_desc.id, priv->bpid); } - /* We'll only start the txqs when the link is actually ready; make sure - * we don't race against the link up notification, which may come - * immediately after dpni_enable(); - */ - netif_tx_stop_all_queues(net_dev); + if (!priv->mac) { + /* We'll only start the txqs when the link is actually ready; + * make sure we don't race against the link up notification, + * which may come immediately after dpni_enable(); + */ + netif_tx_stop_all_queues(net_dev); + + /* Also, explicitly set carrier off, otherwise + * netif_carrier_ok() will return true and cause 'ip link show' + * to report the LOWER_UP flag, even though the link + * notification wasn't even received. + */ + netif_carrier_off(net_dev); + } enable_ch_napi(priv); - /* Also, explicitly set carrier off, otherwise netif_carrier_ok() will - * return true and cause 'ip link show' to report the LOWER_UP flag, - * even though the link notification wasn't even received. - */ - netif_carrier_off(net_dev); err = dpni_enable(priv->mc_io, 0, priv->mc_token); if (err < 0) { @@ -1330,13 +1340,17 @@ static int dpaa2_eth_open(struct net_device *net_dev) goto enable_err; } - /* If the DPMAC object has already processed the link up interrupt, - * we have to learn the link state ourselves. - */ - err = link_state_update(priv); - if (err < 0) { - netdev_err(net_dev, "Can't update link state\n"); - goto link_state_err; + if (!priv->mac) { + /* If the DPMAC object has already processed the link up + * interrupt, we have to learn the link state ourselves. + */ + err = link_state_update(priv); + if (err < 0) { + netdev_err(net_dev, "Can't update link state\n"); + goto link_state_err; + } + } else { + phylink_start(priv->mac->phylink); } return 0; @@ -1411,8 +1425,12 @@ static int dpaa2_eth_stop(struct net_device *net_dev) int dpni_enabled = 0; int retries = 10; - netif_tx_stop_all_queues(net_dev); - netif_carrier_off(net_dev); + if (!priv->mac) { + netif_tx_stop_all_queues(net_dev); + netif_carrier_off(net_dev); + } else { + phylink_stop(priv->mac->phylink); + } /* On dpni_disable(), the MC firmware will: * - stop MAC Rx and wait for all Rx frames to be enqueued to software @@ -3342,12 +3360,56 @@ static int poll_link_state(void *arg) return 0; } +static int dpaa2_eth_connect_mac(struct dpaa2_eth_priv *priv) +{ + struct fsl_mc_device *dpni_dev, *dpmac_dev; + struct dpaa2_mac *mac; + int err; + + dpni_dev = to_fsl_mc_device(priv->net_dev->dev.parent); + dpmac_dev = fsl_mc_get_endpoint(dpni_dev); + if (!dpmac_dev || dpmac_dev->dev.type != &fsl_mc_bus_dpmac_type) + return 0; + + if (dpaa2_mac_is_type_fixed(dpmac_dev, priv->mc_io)) + return 0; + + mac = kzalloc(sizeof(struct dpaa2_mac), GFP_KERNEL); + if (!mac) + return -ENOMEM; + + mac->mc_dev = dpmac_dev; + mac->mc_io = priv->mc_io; + mac->net_dev = priv->net_dev; + + err = dpaa2_mac_connect(mac); + if (err) { + netdev_err(priv->net_dev, "Error connecting to the MAC endpoint\n"); + kfree(mac); + return err; + } + priv->mac = mac; + + return 0; +} + +static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv) +{ + if (!priv->mac) + return; + + dpaa2_mac_disconnect(priv->mac); + kfree(priv->mac); + priv->mac = NULL; +} + static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg) { u32 status = ~0; struct device *dev = (struct device *)arg; struct fsl_mc_device *dpni_dev = to_fsl_mc_device(dev); struct net_device *net_dev = dev_get_drvdata(dev); + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); int err; err = dpni_get_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle, @@ -3363,6 +3425,13 @@ static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg) if (status & DPNI_IRQ_EVENT_ENDPOINT_CHANGED) { set_mac_addr(netdev_priv(net_dev)); update_tx_fqids(priv); + + rtnl_lock(); + if (priv->mac) + dpaa2_eth_disconnect_mac(priv); + else + dpaa2_eth_connect_mac(priv); + rtnl_unlock(); } return IRQ_HANDLED; @@ -3539,6 +3608,10 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) priv->do_link_poll = true; } + err = dpaa2_eth_connect_mac(priv); + if (err) + goto err_connect_mac; + err = register_netdev(net_dev); if (err < 0) { dev_err(dev, "register_netdev() failed\n"); @@ -3553,6 +3626,8 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) return 0; err_netdev_reg: + dpaa2_eth_disconnect_mac(priv); +err_connect_mac: if (priv->do_link_poll) kthread_stop(priv->poll_thread); else @@ -3595,6 +3670,8 @@ static int dpaa2_eth_remove(struct fsl_mc_device *ls_dev) #ifdef CONFIG_DEBUG_FS dpaa2_dbg_remove(priv); #endif + dpaa2_eth_disconnect_mac(priv); + unregister_netdev(net_dev); if (priv->do_link_poll) diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h index 686b651edcb2..7635db3ef903 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h @@ -17,6 +17,7 @@ #include "dpaa2-eth-trace.h" #include "dpaa2-eth-debugfs.h" +#include "dpaa2-mac.h" #define DPAA2_WRIOP_VERSION(x, y, z) ((x) << 10 | (y) << 5 | (z) << 0) @@ -415,6 +416,8 @@ struct dpaa2_eth_priv { #ifdef CONFIG_DEBUG_FS struct dpaa2_debugfs dbg; #endif + + struct dpaa2_mac *mac; }; #define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \ diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c index dc9a6c36cac0..0883620631b8 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c @@ -85,6 +85,10 @@ static void dpaa2_eth_get_drvinfo(struct net_device *net_dev, { struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + if (priv->mac) + return phylink_ethtool_ksettings_get(priv->mac->phylink, + link_settings); + link_settings->base.autoneg = AUTONEG_DISABLE; if (!(priv->link_state.options & DPNI_LINK_OPT_HALF_DUPLEX)) link_settings->base.duplex = DUPLEX_FULL; @@ -93,12 +97,29 @@ static void dpaa2_eth_get_drvinfo(struct net_device *net_dev, return 0; } +static int +dpaa2_eth_set_link_ksettings(struct net_device *net_dev, + const struct ethtool_link_ksettings *link_settings) +{ + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + + if (!priv->mac) + return -ENOTSUPP; + + return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings); +} + static void dpaa2_eth_get_pauseparam(struct net_device *net_dev, struct ethtool_pauseparam *pause) { struct dpaa2_eth_priv *priv = netdev_priv(net_dev); u64 link_options = priv->link_state.options; + if (priv->mac) { + phylink_ethtool_get_pauseparam(priv->mac->phylink, pause); + return; + } + pause->rx_pause = !!(link_options & DPNI_LINK_OPT_PAUSE); pause->tx_pause = pause->rx_pause ^ !!(link_options & DPNI_LINK_OPT_ASYM_PAUSE); @@ -118,6 +139,9 @@ static int dpaa2_eth_set_pauseparam(struct net_device *net_dev, return -EOPNOTSUPP; } + if (priv->mac) + return phylink_ethtool_set_pauseparam(priv->mac->phylink, + pause); if (pause->autoneg) return -EOPNOTSUPP; @@ -728,6 +752,7 @@ static int dpaa2_eth_get_ts_info(struct net_device *dev, .get_drvinfo = dpaa2_eth_get_drvinfo, .get_link = ethtool_op_get_link, .get_link_ksettings = dpaa2_eth_get_link_ksettings, + .set_link_ksettings = dpaa2_eth_set_link_ksettings, .get_pauseparam = dpaa2_eth_get_pauseparam, .set_pauseparam = dpaa2_eth_set_pauseparam, .get_sset_count = dpaa2_eth_get_sset_count, diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c new file mode 100644 index 000000000000..c4e9da845d44 --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* Copyright 2019 NXP */ + +#include "dpaa2-eth.h" +#include "dpaa2-mac.h" + +#define phylink_to_dpaa2_mac(config) \ + container_of((config), struct dpaa2_mac, phylink_config) + +static phy_interface_t phy_mode(enum dpmac_eth_if eth_if) +{ + switch (eth_if) { + case DPMAC_ETH_IF_RGMII: + return PHY_INTERFACE_MODE_RGMII; + default: + return -EINVAL; + } +} + +/* Caller must call of_node_put on the returned value */ +static struct device_node *dpaa2_mac_get_node(u16 dpmac_id) +{ + struct device_node *dpmacs, *dpmac = NULL; + u32 id; + int err; + + dpmacs = of_find_node_by_name(NULL, "dpmacs"); + if (!dpmacs) + return NULL; + + while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) { + err = of_property_read_u32(dpmac, "reg", &id); + if (err) + continue; + if (id == dpmac_id) + break; + } + + of_node_put(dpmacs); + + return dpmac; +} + +static int dpaa2_mac_get_if_mode(struct device_node *node, + struct dpmac_attr attr) +{ + int if_mode; + + if_mode = of_get_phy_mode(node); + if (if_mode >= 0) + return if_mode; + + if_mode = phy_mode(attr.eth_if); + if (if_mode >= 0) + return if_mode; + + return -ENODEV; +} + +static bool dpaa2_mac_phy_mode_mismatch(struct dpaa2_mac *mac, + phy_interface_t interface) +{ + switch (interface) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + return (interface != mac->if_mode); + default: + return true; + } +} + +static void dpaa2_mac_validate(struct phylink_config *config, + unsigned long *supported, + struct phylink_link_state *state) +{ + struct dpaa2_mac *mac = phylink_to_dpaa2_mac(config); + struct dpmac_link_state *dpmac_state = &mac->state; + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + + if (state->interface != PHY_INTERFACE_MODE_NA && + dpaa2_mac_phy_mode_mismatch(mac, state->interface)) { + goto empty_set; + } + + phylink_set_port_modes(mask); + phylink_set(mask, Autoneg); + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); + + switch (state->interface) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Full); + phylink_set(mask, 1000baseT_Full); + break; + default: + goto empty_set; + } + + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); + + return; + +empty_set: + linkmode_zero(supported); +} + +static void dpaa2_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) +{ + struct dpaa2_mac *mac = phylink_to_dpaa2_mac(config); + struct dpmac_link_state *dpmac_state = &mac->state; + int err; + + if (state->speed != SPEED_UNKNOWN) + dpmac_state->rate = state->speed; + + if (state->duplex != DUPLEX_UNKNOWN) { + if (!state->duplex) + dpmac_state->options |= DPMAC_LINK_OPT_HALF_DUPLEX; + else + dpmac_state->options &= ~DPMAC_LINK_OPT_HALF_DUPLEX; + } + + if (state->an_enabled) + dpmac_state->options |= DPMAC_LINK_OPT_AUTONEG; + else + dpmac_state->options &= ~DPMAC_LINK_OPT_AUTONEG; + + if (state->pause & MLO_PAUSE_RX) + dpmac_state->options |= DPMAC_LINK_OPT_PAUSE; + else + dpmac_state->options &= ~DPMAC_LINK_OPT_PAUSE; + + if (!!(state->pause & MLO_PAUSE_RX) ^ !!(state->pause & MLO_PAUSE_TX)) + dpmac_state->options |= DPMAC_LINK_OPT_ASYM_PAUSE; + else + dpmac_state->options &= ~DPMAC_LINK_OPT_ASYM_PAUSE; + + err = dpmac_set_link_state(mac->mc_io, 0, + mac->mc_dev->mc_handle, dpmac_state); + if (err) + netdev_err(mac->net_dev, "dpmac_set_link_state() = %d\n", err); +} + +static void dpaa2_mac_link_up(struct phylink_config *config, unsigned int mode, + phy_interface_t interface, struct phy_device *phy) +{ + struct dpaa2_mac *mac = phylink_to_dpaa2_mac(config); + struct dpmac_link_state *dpmac_state = &mac->state; + int err; + + dpmac_state->up = 1; + err = dpmac_set_link_state(mac->mc_io, 0, + mac->mc_dev->mc_handle, dpmac_state); + if (err) + netdev_err(mac->net_dev, "dpmac_set_link_state() = %d\n", err); +} + +static void dpaa2_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface) +{ + struct dpaa2_mac *mac = phylink_to_dpaa2_mac(config); + struct dpmac_link_state *dpmac_state = &mac->state; + int err; + + dpmac_state->up = 0; + err = dpmac_set_link_state(mac->mc_io, 0, + mac->mc_dev->mc_handle, dpmac_state); + if (err) + netdev_err(mac->net_dev, "dpmac_set_link_state() = %d\n", err); +} + +static const struct phylink_mac_ops dpaa2_mac_phylink_ops = { + .validate = dpaa2_mac_validate, + .mac_config = dpaa2_mac_config, + .mac_link_up = dpaa2_mac_link_up, + .mac_link_down = dpaa2_mac_link_down, +}; + +bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev, + struct fsl_mc_io *mc_io) +{ + struct dpmac_attr attr; + bool fixed = false; + u16 mc_handle = 0; + int err; + + err = dpmac_open(mc_io, 0, dpmac_dev->obj_desc.id, + &mc_handle); + if (err || !mc_handle) + return false; + + err = dpmac_get_attributes(mc_io, 0, mc_handle, &attr); + if (err) + goto out; + + if (attr.link_type == DPMAC_LINK_TYPE_FIXED) + fixed = true; + +out: + dpmac_close(mc_io, 0, mc_handle); + + return fixed; +} + +int dpaa2_mac_connect(struct dpaa2_mac *mac) +{ + struct fsl_mc_device *dpmac_dev = mac->mc_dev; + struct net_device *net_dev = mac->net_dev; + struct device_node *dpmac_node; + struct phylink *phylink; + struct dpmac_attr attr; + int err; + + err = dpmac_open(mac->mc_io, 0, dpmac_dev->obj_desc.id, + &dpmac_dev->mc_handle); + if (err || !dpmac_dev->mc_handle) { + netdev_err(net_dev, "dpmac_open() = %d\n", err); + return -ENODEV; + } + + err = dpmac_get_attributes(mac->mc_io, 0, dpmac_dev->mc_handle, &attr); + if (err) { + netdev_err(net_dev, "dpmac_get_attributes() = %d\n", err); + goto err_close_dpmac; + } + + dpmac_node = dpaa2_mac_get_node(attr.id); + if (!dpmac_node) { + netdev_err(net_dev, "No dpmac@%d node found.\n", attr.id); + err = -ENODEV; + goto err_close_dpmac; + } + + err = dpaa2_mac_get_if_mode(dpmac_node, attr); + if (err < 0) { + err = -EINVAL; + goto err_put_node; + } + mac->if_mode = err; + + /* The MAC does not have the capability to add RGMII delays so + * error out if the interface mode requests them and there is no PHY + * to act upon them + */ + if (of_phy_is_fixed_link(dpmac_node) && + (mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID || + mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID || + mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) { + netdev_err(net_dev, "RGMII delay not supported\n"); + err = -EINVAL; + goto err_put_node; + } + + mac->phylink_config.dev = &net_dev->dev; + mac->phylink_config.type = PHYLINK_NETDEV; + + phylink = phylink_create(&mac->phylink_config, + of_fwnode_handle(dpmac_node), mac->if_mode, + &dpaa2_mac_phylink_ops); + if (IS_ERR(phylink)) { + err = PTR_ERR(phylink); + goto err_put_node; + } + mac->phylink = phylink; + + err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0); + if (err) { + netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err); + goto err_phylink_destroy; + } + + of_node_put(dpmac_node); + + return 0; + +err_phylink_destroy: + phylink_destroy(mac->phylink); +err_put_node: + of_node_put(dpmac_node); +err_close_dpmac: + dpmac_close(mac->mc_io, 0, dpmac_dev->mc_handle); + return err; +} + +void dpaa2_mac_disconnect(struct dpaa2_mac *mac) +{ + if (!mac->phylink) + return; + + phylink_disconnect_phy(mac->phylink); + phylink_destroy(mac->phylink); + dpmac_close(mac->mc_io, 0, mac->mc_dev->mc_handle); +} diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h new file mode 100644 index 000000000000..8634d0de7ef3 --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* Copyright 2019 NXP */ +#ifndef DPAA2_MAC_H +#define DPAA2_MAC_H + +#include +#include +#include +#include + +#include "dpmac.h" +#include "dpmac-cmd.h" + +struct dpaa2_mac { + struct fsl_mc_device *mc_dev; + struct dpmac_link_state state; + struct net_device *net_dev; + struct fsl_mc_io *mc_io; + + struct phylink_config phylink_config; + struct phylink *phylink; + phy_interface_t if_mode; +}; + +bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev, + struct fsl_mc_io *mc_io); + +int dpaa2_mac_connect(struct dpaa2_mac *mac); + +void dpaa2_mac_disconnect(struct dpaa2_mac *mac); + +#endif /* DPAA2_MAC_H */ diff --git a/drivers/net/ethernet/freescale/dpaa2/dpmac-cmd.h b/drivers/net/ethernet/freescale/dpaa2/dpmac-cmd.h new file mode 100644 index 000000000000..96a9b0d0992e --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa2/dpmac-cmd.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* Copyright 2013-2016 Freescale Semiconductor Inc. + * Copyright 2019 NXP + */ +#ifndef _FSL_DPMAC_CMD_H +#define _FSL_DPMAC_CMD_H + +/* DPMAC Version */ +#define DPMAC_VER_MAJOR 4 +#define DPMAC_VER_MINOR 4 +#define DPMAC_CMD_BASE_VERSION 1 +#define DPMAC_CMD_2ND_VERSION 2 +#define DPMAC_CMD_ID_OFFSET 4 + +#define DPMAC_CMD(id) (((id) << DPMAC_CMD_ID_OFFSET) | DPMAC_CMD_BASE_VERSION) +#define DPMAC_CMD_V2(id) (((id) << DPMAC_CMD_ID_OFFSET) | DPMAC_CMD_2ND_VERSION) + +/* Command IDs */ +#define DPMAC_CMDID_CLOSE DPMAC_CMD(0x800) +#define DPMAC_CMDID_OPEN DPMAC_CMD(0x80c) + +#define DPMAC_CMDID_GET_ATTR DPMAC_CMD(0x004) +#define DPMAC_CMDID_SET_LINK_STATE DPMAC_CMD_V2(0x0c3) + +/* Macros for accessing command fields smaller than 1byte */ +#define DPMAC_MASK(field) \ + GENMASK(DPMAC_##field##_SHIFT + DPMAC_##field##_SIZE - 1, \ + DPMAC_##field##_SHIFT) + +#define dpmac_set_field(var, field, val) \ + ((var) |= (((val) << DPMAC_##field##_SHIFT) & DPMAC_MASK(field))) +#define dpmac_get_field(var, field) \ + (((var) & DPMAC_MASK(field)) >> DPMAC_##field##_SHIFT) + +struct dpmac_cmd_open { + __le32 dpmac_id; +}; + +struct dpmac_rsp_get_attributes { + u8 eth_if; + u8 link_type; + __le16 id; + __le32 max_rate; +}; + +#define DPMAC_STATE_SIZE 1 +#define DPMAC_STATE_SHIFT 0 +#define DPMAC_STATE_VALID_SIZE 1 +#define DPMAC_STATE_VALID_SHIFT 1 + +struct dpmac_cmd_set_link_state { + __le64 options; + __le32 rate; + __le32 pad0; + /* from lsb: up:1, state_valid:1 */ + u8 state; + u8 pad1[7]; + __le64 supported; + __le64 advertising; +}; + +#endif /* _FSL_DPMAC_CMD_H */ diff --git a/drivers/net/ethernet/freescale/dpaa2/dpmac.c b/drivers/net/ethernet/freescale/dpaa2/dpmac.c new file mode 100644 index 000000000000..b75189deffb1 --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa2/dpmac.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* Copyright 2013-2016 Freescale Semiconductor Inc. + * Copyright 2019 NXP + */ +#include +#include "dpmac.h" +#include "dpmac-cmd.h" + +/** + * dpmac_open() - Open a control session for the specified object. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @dpmac_id: DPMAC unique ID + * @token: Returned token; use in subsequent API calls + * + * This function can be used to open a control session for an + * already created object; an object may have been declared in + * the DPL or by calling the dpmac_create function. + * This function returns a unique authentication token, + * associated with the specific object ID and the specific MC + * portal; this token must be used in all subsequent commands for + * this specific object + * + * Return: '0' on Success; Error code otherwise. + */ +int dpmac_open(struct fsl_mc_io *mc_io, + u32 cmd_flags, + int dpmac_id, + u16 *token) +{ + struct dpmac_cmd_open *cmd_params; + struct fsl_mc_command cmd = { 0 }; + int err; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMAC_CMDID_OPEN, + cmd_flags, + 0); + cmd_params = (struct dpmac_cmd_open *)cmd.params; + cmd_params->dpmac_id = cpu_to_le32(dpmac_id); + + /* send command to mc*/ + err = mc_send_command(mc_io, &cmd); + if (err) + return err; + + /* retrieve response parameters */ + *token = mc_cmd_hdr_read_token(&cmd); + + return err; +} + +/** + * dpmac_close() - Close the control session of the object + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPMAC object + * + * After this function is called, no further operations are + * allowed on the object without opening a new control session. + * + * Return: '0' on Success; Error code otherwise. + */ +int dpmac_close(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token) +{ + struct fsl_mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CLOSE, cmd_flags, + token); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} + +/** + * dpmac_get_attributes - Retrieve DPMAC attributes. + * + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPMAC object + * @attr: Returned object's attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpmac_get_attributes(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpmac_attr *attr) +{ + struct dpmac_rsp_get_attributes *rsp_params; + struct fsl_mc_command cmd = { 0 }; + int err; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_ATTR, + cmd_flags, + token); + + /* send command to mc*/ + err = mc_send_command(mc_io, &cmd); + if (err) + return err; + + /* retrieve response parameters */ + rsp_params = (struct dpmac_rsp_get_attributes *)cmd.params; + attr->eth_if = rsp_params->eth_if; + attr->link_type = rsp_params->link_type; + attr->id = le16_to_cpu(rsp_params->id); + attr->max_rate = le32_to_cpu(rsp_params->max_rate); + + return 0; +} + +/** + * dpmac_set_link_state() - Set the Ethernet link status + * @mc_io: Pointer to opaque I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPMAC object + * @link_state: Link state configuration + * + * Return: '0' on Success; Error code otherwise. + */ +int dpmac_set_link_state(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpmac_link_state *link_state) +{ + struct dpmac_cmd_set_link_state *cmd_params; + struct fsl_mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_LINK_STATE, + cmd_flags, + token); + cmd_params = (struct dpmac_cmd_set_link_state *)cmd.params; + cmd_params->options = cpu_to_le64(link_state->options); + cmd_params->rate = cpu_to_le32(link_state->rate); + dpmac_set_field(cmd_params->state, STATE, link_state->up); + dpmac_set_field(cmd_params->state, STATE_VALID, + link_state->state_valid); + cmd_params->supported = cpu_to_le64(link_state->supported); + cmd_params->advertising = cpu_to_le64(link_state->advertising); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} diff --git a/drivers/net/ethernet/freescale/dpaa2/dpmac.h b/drivers/net/ethernet/freescale/dpaa2/dpmac.h new file mode 100644 index 000000000000..4efc410a479e --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa2/dpmac.h @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* Copyright 2013-2016 Freescale Semiconductor Inc. + * Copyright 2019 NXP + */ +#ifndef __FSL_DPMAC_H +#define __FSL_DPMAC_H + +/* Data Path MAC API + * Contains initialization APIs and runtime control APIs for DPMAC + */ + +struct fsl_mc_io; + +int dpmac_open(struct fsl_mc_io *mc_io, + u32 cmd_flags, + int dpmac_id, + u16 *token); + +int dpmac_close(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token); + +/** + * enum dpmac_link_type - DPMAC link type + * @DPMAC_LINK_TYPE_NONE: No link + * @DPMAC_LINK_TYPE_FIXED: Link is fixed type + * @DPMAC_LINK_TYPE_PHY: Link by PHY ID + * @DPMAC_LINK_TYPE_BACKPLANE: Backplane link type + */ +enum dpmac_link_type { + DPMAC_LINK_TYPE_NONE, + DPMAC_LINK_TYPE_FIXED, + DPMAC_LINK_TYPE_PHY, + DPMAC_LINK_TYPE_BACKPLANE +}; + +/** + * enum dpmac_eth_if - DPMAC Ethrnet interface + * @DPMAC_ETH_IF_MII: MII interface + * @DPMAC_ETH_IF_RMII: RMII interface + * @DPMAC_ETH_IF_SMII: SMII interface + * @DPMAC_ETH_IF_GMII: GMII interface + * @DPMAC_ETH_IF_RGMII: RGMII interface + * @DPMAC_ETH_IF_SGMII: SGMII interface + * @DPMAC_ETH_IF_QSGMII: QSGMII interface + * @DPMAC_ETH_IF_XAUI: XAUI interface + * @DPMAC_ETH_IF_XFI: XFI interface + * @DPMAC_ETH_IF_CAUI: CAUI interface + * @DPMAC_ETH_IF_1000BASEX: 1000BASEX interface + * @DPMAC_ETH_IF_USXGMII: USXGMII interface + */ +enum dpmac_eth_if { + DPMAC_ETH_IF_MII, + DPMAC_ETH_IF_RMII, + DPMAC_ETH_IF_SMII, + DPMAC_ETH_IF_GMII, + DPMAC_ETH_IF_RGMII, + DPMAC_ETH_IF_SGMII, + DPMAC_ETH_IF_QSGMII, + DPMAC_ETH_IF_XAUI, + DPMAC_ETH_IF_XFI, + DPMAC_ETH_IF_CAUI, + DPMAC_ETH_IF_1000BASEX, + DPMAC_ETH_IF_USXGMII, +}; + +/** + * struct dpmac_attr - Structure representing DPMAC attributes + * @id: DPMAC object ID + * @max_rate: Maximum supported rate - in Mbps + * @eth_if: Ethernet interface + * @link_type: link type + */ +struct dpmac_attr { + u16 id; + u32 max_rate; + enum dpmac_eth_if eth_if; + enum dpmac_link_type link_type; +}; + +int dpmac_get_attributes(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpmac_attr *attr); + +/** + * DPMAC link configuration/state options + */ + +/** + * Enable auto-negotiation + */ +#define DPMAC_LINK_OPT_AUTONEG BIT_ULL(0) +/** + * Enable half-duplex mode + */ +#define DPMAC_LINK_OPT_HALF_DUPLEX BIT_ULL(1) +/** + * Enable pause frames + */ +#define DPMAC_LINK_OPT_PAUSE BIT_ULL(2) +/** + * Enable a-symmetric pause frames + */ +#define DPMAC_LINK_OPT_ASYM_PAUSE BIT_ULL(3) + +/** + * Advertised link speeds + */ +#define DPMAC_ADVERTISED_10BASET_FULL BIT_ULL(0) +#define DPMAC_ADVERTISED_100BASET_FULL BIT_ULL(1) +#define DPMAC_ADVERTISED_1000BASET_FULL BIT_ULL(2) +#define DPMAC_ADVERTISED_10000BASET_FULL BIT_ULL(4) +#define DPMAC_ADVERTISED_2500BASEX_FULL BIT_ULL(5) + +/** + * Advertise auto-negotiation enable + */ +#define DPMAC_ADVERTISED_AUTONEG BIT_ULL(3) + +/** + * struct dpmac_link_state - DPMAC link configuration request + * @rate: Rate in Mbps + * @options: Enable/Disable DPMAC link cfg features (bitmap) + * @up: Link state + * @state_valid: Ignore/Update the state of the link + * @supported: Speeds capability of the phy (bitmap) + * @advertising: Speeds that are advertised for autoneg (bitmap) + */ +struct dpmac_link_state { + u32 rate; + u64 options; + int up; + int state_valid; + u64 supported; + u64 advertising; +}; + +int dpmac_set_link_state(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpmac_link_state *link_state); + +#endif /* __FSL_DPMAC_H */ From patchwork Wed Oct 23 12:47:09 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ioana Ciornei X-Patchwork-Id: 1182137 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=nxp.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 46yqsF5BXSz9sPl for ; Wed, 23 Oct 2019 23:47:29 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2404200AbfJWMr3 (ORCPT ); Wed, 23 Oct 2019 08:47:29 -0400 Received: from inva020.nxp.com ([92.121.34.13]:56944 "EHLO inva020.nxp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2390962AbfJWMr1 (ORCPT ); Wed, 23 Oct 2019 08:47:27 -0400 Received: from inva020.nxp.com (localhost [127.0.0.1]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id D074D1A0738; Wed, 23 Oct 2019 14:47:25 +0200 (CEST) Received: from inva024.eu-rdc02.nxp.com (inva024.eu-rdc02.nxp.com [134.27.226.22]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id C38721A0020; Wed, 23 Oct 2019 14:47:25 +0200 (CEST) Received: from fsr-ub1464-137.ea.freescale.net (fsr-ub1464-137.ea.freescale.net [10.171.82.114]) by inva024.eu-rdc02.nxp.com (Postfix) with ESMTP id 743CF205FE; Wed, 23 Oct 2019 14:47:25 +0200 (CEST) From: Ioana Ciornei To: davem@davemloft.net, netdev@vger.kernel.org Cc: laurentiu.tudor@nxp.com, andrew@lunn.ch, f.fainelli@gmail.com, linux@armlinux.org.uk, Ioana Ciornei Subject: [PATCH net-next v2 5/5] net: documentation: add docs for MAC/PHY support in DPAA2 Date: Wed, 23 Oct 2019 15:47:09 +0300 Message-Id: <1571834829-29560-6-git-send-email-ioana.ciornei@nxp.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> References: <1571834829-29560-1-git-send-email-ioana.ciornei@nxp.com> Reply-to: ioana.ciornei@nxp.com X-Virus-Scanned: ClamAV using ClamSMTP Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Add documentation file for the MAC/PHY support in the DPAA2 architecture. This describes the architecture and implementation of the interface between phylink and a DPAA2 network driver. Signed-off-by: Ioana Ciornei --- Changes in v2: - none .../device_drivers/freescale/dpaa2/index.rst | 1 + .../freescale/dpaa2/mac-phy-support.rst | 191 +++++++++++++++++++++ MAINTAINERS | 2 + 3 files changed, 194 insertions(+) create mode 100644 Documentation/networking/device_drivers/freescale/dpaa2/mac-phy-support.rst diff --git a/Documentation/networking/device_drivers/freescale/dpaa2/index.rst b/Documentation/networking/device_drivers/freescale/dpaa2/index.rst index 67bd87fe6c53..ee40fcc5ddff 100644 --- a/Documentation/networking/device_drivers/freescale/dpaa2/index.rst +++ b/Documentation/networking/device_drivers/freescale/dpaa2/index.rst @@ -8,3 +8,4 @@ DPAA2 Documentation overview dpio-driver ethernet-driver + mac-phy-support diff --git a/Documentation/networking/device_drivers/freescale/dpaa2/mac-phy-support.rst b/Documentation/networking/device_drivers/freescale/dpaa2/mac-phy-support.rst new file mode 100644 index 000000000000..51e6624fb774 --- /dev/null +++ b/Documentation/networking/device_drivers/freescale/dpaa2/mac-phy-support.rst @@ -0,0 +1,191 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: + +======================= +DPAA2 MAC / PHY support +======================= + +:Copyright: |copy| 2019 NXP + +Overview +-------- + +The DPAA2 MAC / PHY support consists of a set of APIs that help DPAA2 network +drivers (dpaa2-eth, dpaa2-ethsw) interract with the PHY library. + +DPAA2 Software Architecture +--------------------------- + +Among other DPAA2 objects, the fsl-mc bus exports DPNI objects (abstracting a +network interface) and DPMAC objects (abstracting a MAC). The dpaa2-eth driver +probes on the DPNI object and connects to and configures a DPMAC object with +the help of phylink. + +Data connections may be established between a DPNI and a DPMAC, or between two +DPNIs. Depending on the connection type, the netif_carrier_[on/off] is handled +directly by the dpaa2-eth driver or by phylink. + +.. code-block:: none + + Sources of abstracted link state information presented by the MC firmware + + +--------------------------------------+ + +------------+ +---------+ | xgmac_mdio | + | net_device | | phylink |--| +-----+ +-----+ +-----+ +-----+ | + +------------+ +---------+ | | PHY | | PHY | | PHY | | PHY | | + | | | +-----+ +-----+ +-----+ +-----+ | + +------------------------------------+ | External MDIO bus | + | dpaa2-eth | +--------------------------------------+ + +------------------------------------+ + | | Linux + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + | | MC firmware + | /| V + +----------+ / | +----------+ + | | / | | | + | | | | | | + | DPNI |<------| |<------| DPMAC | + | | | | | | + | | \ |<---+ | | + +----------+ \ | | +----------+ + \| | + | + +--------------------------------------+ + | MC firmware polling MAC PCS for link | + | +-----+ +-----+ +-----+ +-----+ | + | | PCS | | PCS | | PCS | | PCS | | + | +-----+ +-----+ +-----+ +-----+ | + | Internal MDIO bus | + +--------------------------------------+ + + +Depending on an MC firmware configuration setting, each MAC may be in one of two modes: + +- DPMAC_LINK_TYPE_FIXED: the link state management is handled exclusively by + the MC firmware by polling the MAC PCS. Without the need to register a + phylink instance, the dpaa2-eth driver will not bind to the connected dpmac + object at all. + +- DPMAC_LINK_TYPE_PHY: The MC firmware is left waiting for link state update + events, but those are in fact passed strictly between the dpaa2-mac (based on + phylink) and its attached net_device driver (dpaa2-eth, dpaa2-ethsw), + effectively bypassing the firmware. + +Implementation +-------------- + +At probe time or when a DPNI's endpoint is dynamically changed, the dpaa2-eth +is responsible to find out if the peer object is a DPMAC and if this is the +case, to integrate it with PHYLINK using the dpaa2_mac_connect() API, which +will do the following: + + - look up the device tree for PHYLINK-compatible of binding (phy-handle) + - will create a PHYLINK instance associated with the received net_device + - connect to the PHY using phylink_of_phy_connect() + +The following phylink_mac_ops callback are implemented: + + - .validate() will populate the supported linkmodes with the MAC capabilities + only when the phy_interface_t is RGMII_* (at the moment, this is the only + link type supported by the driver). + + - .mac_config() will configure the MAC in the new configuration using the + dpmac_set_link_state() MC firmware API. + + - .mac_link_up() / .mac_link_down() will update the MAC link using the same + API described above. + +At driver unbind() or when the DPNI object is disconnected from the DPMAC, the +dpaa2-eth driver calls dpaa2_mac_disconnect() which will, in turn, disconnect +from the PHY and destroy the PHYLINK instance. + +In case of a DPNI-DPMAC connection, an 'ip link set dev eth0 up' would start +the following sequence of operations: + +(1) phylink_start() called from .dev_open(). +(2) The .mac_config() and .mac_link_up() callbacks are called by PHYLINK. +(3) In order to configure the HW MAC, the MC Firmware API + dpmac_set_link_state() is called. +(4) The firmware will eventually setup the HW MAC in the new configuration. +(5) A netif_carrier_on() call is made directly from PHYLINK on the associated + net_device. +(6) The dpaa2-eth driver handles the LINK_STATE_CHANGE irq in order to + enable/disable Rx taildrop based on the pause frame settings. + +.. code-block:: none + + +---------+ +---------+ + | PHYLINK |-------------->| eth0 | + +---------+ (5) +---------+ + (1) ^ | + | | + | v (2) + +-----------------------------------+ + | dpaa2-eth | + +-----------------------------------+ + | ^ (6) + | | + v (3) | + +---------+---------------+---------+ + | DPMAC | | DPNI | + +---------+ +---------+ + | MC Firmware | + +-----------------------------------+ + | + | + v (4) + +-----------------------------------+ + | HW MAC | + +-----------------------------------+ + +In case of a DPNI-DPNI connection, a usual sequence of operations looks like +the following: + +(1) ip link set dev eth0 up +(2) The dpni_enable() MC API called on the associated fsl_mc_device. +(3) ip link set dev eth1 up +(4) The dpni_enable() MC API called on the associated fsl_mc_device. +(5) The LINK_STATE_CHANGED irq is received by both instances of the dpaa2-eth + driver because now the operational link state is up. +(6) The netif_carrier_on() is called on the exported net_device from + link_state_update(). + +.. code-block:: none + + +---------+ +---------+ + | eth0 | | eth1 | + +---------+ +---------+ + | ^ ^ | + | | | | + (1) v | (6) (6) | v (3) + +---------+ +---------+ + |dpaa2-eth| |dpaa2-eth| + +---------+ +---------+ + | ^ ^ | + | | | | + (2) v | (5) (5) | v (4) + +---------+---------------+---------+ + | DPNI | | DPNI | + +---------+ +---------+ + | MC Firmware | + +-----------------------------------+ + + +Exported API +------------ + +Any DPAA2 driver that drivers endpoints of DPMAC objects should service its +_EVENT_ENDPOINT_CHANGED irq and connect/disconnect from the associated DPMAC +when necessary using the below listed API:: + + - int dpaa2_mac_connect(struct dpaa2_mac *mac); + - void dpaa2_mac_disconnect(struct dpaa2_mac *mac); + +A phylink integration is necessary only when the partner DPMAC is not of TYPE_FIXED. +One can check for this condition using the below API:: + + - bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,struct fsl_mc_io *mc_io); + +Before connection to a MAC, the caller must allocate and populate the +dpaa2_mac structure with the associated net_device, a pointer to the MC portal +to be used and the actual fsl_mc_device structure of the DPMAC. diff --git a/MAINTAINERS b/MAINTAINERS index d0e562d3ce5b..fdc3c89a4a6d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5052,6 +5052,8 @@ F: drivers/net/ethernet/freescale/dpaa2/dpmac* F: drivers/net/ethernet/freescale/dpaa2/dpkg.h F: drivers/net/ethernet/freescale/dpaa2/Makefile F: drivers/net/ethernet/freescale/dpaa2/Kconfig +F: Documentation/networking/device_drivers/freescale/dpaa2/ethernet-driver.rst +F: Documentation/networking/device_drivers/freescale/dpaa2/mac-phy-support.rst DPAA2 ETHERNET SWITCH DRIVER M: Ioana Radulescu