From patchwork Mon Oct 7 11:33:24 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Robin Murphy X-Patchwork-Id: 1172712 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=arm.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 46myzP4dJKz9sPJ for ; Mon, 7 Oct 2019 22:33:37 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727395AbfJGLdg (ORCPT ); Mon, 7 Oct 2019 07:33:36 -0400 Received: from foss.arm.com ([217.140.110.172]:60332 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727376AbfJGLdg (ORCPT ); Mon, 7 Oct 2019 07:33:36 -0400 Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 9B3661570; Mon, 7 Oct 2019 04:33:35 -0700 (PDT) Received: from e110467-lin.cambridge.arm.com (e110467-lin.cambridge.arm.com [10.1.197.57]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPA id 0ADC83F706; Mon, 7 Oct 2019 04:33:33 -0700 (PDT) From: Robin Murphy To: heiko@sntech.de Cc: devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH] arm64: dts: rockchip: Add Beelink A1 Date: Mon, 7 Oct 2019 12:33:24 +0100 Message-Id: <9037b7edbbb41cbbf699ebe3a511daf22d886e7d.1570444695.git.robin.murphy@arm.com> X-Mailer: git-send-email 2.21.0.dirty MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Beelink A1 is a TV box implementing the higher-end options of the RK3328 reference design - the DTB from the stock Android firmware is clearly the "rk3328-box-plus" variant from the Rockchip 3.10 BSP with minor modifications to accommodate the USB WiFi module and additional VFD-style LED driver. It features: - 4GB of 32-bit LPDDR3 - 16GB of HS200 eMMC (newer models with 32GB also exist) - Realtek RTL8211F phy for gigabit ethernet - Fn-Link 6221E-UUC module (RealTek RTL8821CU) for 11ac WiFi and Bluetooth 4.2 - HDMI and analog A/V - 1x USB 3.0 type A host, 1x USB 2.0 type A OTG, 1x micro SD - IR receiver and a neat little LED clock display. Signed-off-by: Robin Murphy --- One question I'm wondering about is whether it's worth pushing the HDMI and analog codec audio cards down into rk3328.dtsi (as with HDMI audio on RK3399), since those audio pipelines are internal to the SoC and the board only really governs whether the outputs are wired up or not. .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 399 ++++++++++++++++++ 3 files changed, 405 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-a1.dts diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c82c5e57d44c..f27f7805f57e 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -40,6 +40,11 @@ properties: - const: asus,rk3288-tinker-s - const: rockchip,rk3288 + - description: Beelink A1 + items: + - const: azw,beelink-a1 + - const: rockchip,rk3328 + - description: bq Curie 2 tablet items: - const: mundoreader,bq-curie2 diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1f18a9392d15..a6f250e7cde2 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts new file mode 100644 index 000000000000..03ad663ff821 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (c) 2017-2019 Arm Ltd. + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Beelink A1"; + compatible = "azw,beelink-a1", "rockchip,rk3328"; + + /* + * UART pins, as viewed with bottom of case removed: + * + * Front + * /------- + * L / o <- Gnd + * e / o <-- Rx + * f / o <--- Tx + * t / o <---- +3.3v + * | + */ + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + vcc_host_5v: usb3-current-switch { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + regulator-name = "vcc_host_5v"; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + cpus { + idle-states { + entry-method = "arm,psci"; + + cpu_sleep: cpu-sleep { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + }; + + analog-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "Analog A/V"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "HDMI"; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; + }; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-idle-states = <&cpu_sleep>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-idle-states = <&cpu_sleep>; + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-idle-states = <&cpu_sleep>; + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-idle-states = <&cpu_sleep>; + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-handle = <&rtl8211f>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,aal; + snps,pbl = <0x4>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211f: phy@0 { + reg = <0>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_logic>; +}; + +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <1000000>; + i2c-scl-falling-time-ns = <5>; + i2c-scl-rising-time-ns = <83>; + status = "okay"; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vdd_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vdd_18>; + pmuio-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + bt_dis: bt-dis { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + chip_en: chip-en { + rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_output_high>; + }; + + wl_dis: wl-dis { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_output_low>; + }; + + wl_wake_host: wl-wake-host { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + pinctrl-names = "default"; + pinctrl-0 = <&bt_dis &bt_wake_host &chip_en &host_wake_bt &wl_dis &wl_wake_host>; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +};