From patchwork Tue Sep 17 14:21:37 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Nuno Sa X-Patchwork-Id: 1163407 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=analog.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=analog.onmicrosoft.com header.i=@analog.onmicrosoft.com header.b="rYfehLPU"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 46Xlg11nL9z9sN1 for ; Wed, 18 Sep 2019 00:22:05 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727730AbfIQOWE (ORCPT ); Tue, 17 Sep 2019 10:22:04 -0400 Received: from mx0a-00128a01.pphosted.com ([148.163.135.77]:59786 "EHLO mx0a-00128a01.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725922AbfIQOWD (ORCPT ); Tue, 17 Sep 2019 10:22:03 -0400 Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id x8HEJkQJ030671; Tue, 17 Sep 2019 10:21:26 -0400 Received: from nam04-co1-obe.outbound.protection.outlook.com (mail-co1nam04lp2051.outbound.protection.outlook.com [104.47.45.51]) by mx0a-00128a01.pphosted.com with ESMTP id 2v0t2962jd-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 17 Sep 2019 10:21:26 -0400 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=MLQafHPtfUpw6TRhsk40GuvLi2LoZXdirHvJM0vFYxPjC7vlCfQ4dcTPcHfXgWYyI+7K5rNiWlBXEvNotHvkLqPOdudlzPheNWJ6b9WoOlMOTxrhsOwuOZfFUBEvbnl00uwHNx95Ee54q0Hu1kSQXnOxkiNipOzpFAk79ae2zhCaCL91IDesFrHJmLQdS3cY5IBZ3aU9QExe2EQCVGAg/IPFZFZeAYsa7MpLBAcKkFwoMLlEpbaw5yaZmmz5PqgRzb7by/vRD83mExpmC0xsxoeGI/s1dcffuLo5Jv8BJXory12oMcHhKmxhr+U932+ZE0WemlGbEMyaJEjjrB5Q6A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=hpPLITKNRunIlbgOdxwj2QjR5rLTqk4VJNPDnpXV4bg=; b=UHi4qX1763VU3AL6O1zDPiVOO2s9cqaMTyqzkyiqmnS2HHx6FhuXq1HV4Uvd5/uslRWaFdXhkdTEAnYMsWqvVKmm8A14o4UpXQpG64ghTYN8TTbHFfVjiNbtUcswnejwJ+/qOpoCON8OuTywmBVcZNRg5iebiqbXwyxuz7CyAEw0tVOdvcZKAy+rdZQcvpbXEOiu/MlAe0JnrjrQgwr3fJhvtPjAIteJGxlJOJMc+M+qPOpNW8QQXmhxPVew/nUyA9pSesbKWTHp3Zy+1pntoRC0MFwvu/G58yEVQBXJKOOR2RGBjPEIQ/SJDfZMGnHk04U264VEulpW4sA8695Psg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 137.71.25.55) smtp.rcpttodomain=kernel.org smtp.mailfrom=analog.com; dmarc=bestguesspass action=none header.from=analog.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=analog.onmicrosoft.com; s=selector2-analog-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=hpPLITKNRunIlbgOdxwj2QjR5rLTqk4VJNPDnpXV4bg=; b=rYfehLPUXGQOJR0pNfnyqN9Vq/kF4p0P19I5HcM0HR4tuuZzcetSrxid+UxA79iX1OrHtWHtM9Hr8MEEDQdqELlYE2AtXRqLcs0QEPpcUcAg2g1saaWWhu1g9GOBEa9jVtNpil9k5L5S5Ua6Z2fwt2u2k2alC8AWaKrEIUSjmGE= Received: from BN6PR03CA0020.namprd03.prod.outlook.com (2603:10b6:404:23::30) by DM6PR03MB4411.namprd03.prod.outlook.com (2603:10b6:5:105::24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.2263.23; Tue, 17 Sep 2019 14:21:19 +0000 Received: from BL2NAM02FT035.eop-nam02.prod.protection.outlook.com (2a01:111:f400:7e46::207) by BN6PR03CA0020.outlook.office365.com (2603:10b6:404:23::30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.2263.15 via Frontend Transport; Tue, 17 Sep 2019 14:21:19 +0000 Received-SPF: Pass (protection.outlook.com: domain of analog.com designates 137.71.25.55 as permitted sender) receiver=protection.outlook.com; client-ip=137.71.25.55; helo=nwd2mta1.analog.com; Received: from nwd2mta1.analog.com (137.71.25.55) by BL2NAM02FT035.mail.protection.outlook.com (10.152.77.157) with Microsoft SMTP Server (version=TLS1_0, cipher=TLS_RSA_WITH_AES_256_CBC_SHA) id 15.20.2263.17 via Frontend Transport; Tue, 17 Sep 2019 14:21:19 +0000 Received: from NWD2HUBCAS7.ad.analog.com (nwd2hubcas7.ad.analog.com [10.64.69.107]) by nwd2mta1.analog.com (8.13.8/8.13.8) with ESMTP id x8HELJxP001845 (version=TLSv1/SSLv3 cipher=AES256-SHA bits=256 verify=OK); Tue, 17 Sep 2019 07:21:19 -0700 Received: from nsa.sphairon.box (10.44.3.90) by NWD2HUBCAS7.ad.analog.com (10.64.69.107) with Microsoft SMTP Server (TLS) id 14.3.408.0; Tue, 17 Sep 2019 10:21:18 -0400 From: =?utf-8?q?Nuno_S=C3=A1?= To: , CC: , , , , , Subject: [PATCH v2 2/2] dt-bindings: iio: Add ltc2983 documentation Date: Tue, 17 Sep 2019 16:21:37 +0200 Message-ID: <20190917142137.157898-2-nuno.sa@analog.com> X-Mailer: git-send-email 2.23.0 In-Reply-To: <20190917142137.157898-1-nuno.sa@analog.com> References: <20190917142137.157898-1-nuno.sa@analog.com> MIME-Version: 1.0 X-Originating-IP: [10.44.3.90] X-ADIRoutedOnPrem: True X-EOPAttributedMessage: 0 X-MS-Office365-Filtering-HT: Tenant X-Forefront-Antispam-Report: CIP:137.71.25.55; IPV:NLI; CTRY:US; EFV:NLI; SFV:NSPM; SFS:(10009020)(136003)(376002)(346002)(39860400002)(396003)(199004)(189003)(8676002)(106002)(446003)(70586007)(2870700001)(6116002)(1076003)(3846002)(356004)(2906002)(7636002)(7736002)(53416004)(50466002)(5660300002)(305945005)(6666004)(86362001)(23676004)(6306002)(246002)(5820100001)(486006)(426003)(476003)(50226002)(30864003)(16526019)(70206006)(45776006)(36756003)(76176011)(2616005)(126002)(26005)(478600001)(4326008)(186003)(336012)(966005)(316002)(110136005)(54906003)(47776003)(11346002)(8936002); DIR:OUT; SFP:1101; SCL:1; SRVR:DM6PR03MB4411; H:nwd2mta1.analog.com; FPR:; SPF:Pass; LANG:en; PTR:nwd2mail10.analog.com; A:1; MX:1; X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: f7d3b2f2-be38-4107-8ff0-08d73b7a4f12 X-Microsoft-Antispam: BCL:0; PCL:0; RULEID:(2390118)(7020095)(4652040)(8989299)(5600167)(711020)(4605104)(4709080)(1401327)(4618075)(4534185)(4627221)(201703031133081)(201702281549075)(8990200)(2017052603328)(7193020); SRVR:DM6PR03MB4411; X-MS-TrafficTypeDiagnostic: DM6PR03MB4411: X-MS-Exchange-PUrlCount: 4 X-Microsoft-Antispam-PRVS: X-MS-Oob-TLC-OOBClassifiers: OLM:8273; X-Forefront-PRVS: 01630974C0 X-MS-Exchange-SenderADCheck: 1 X-Microsoft-Antispam-Message-Info: d4XLtgH/c3QVHl4/R+IFqK1MQsXqvZQLaKU1HveryR0GUTZqQw8Izx8Wt6oYNGb0CmPQQuarsoG7RHWR1uehFAflMuL1HWF08NDzmLh7usJ+bO+J/2jfdBv0SYQtqw6K1MpbKzjZ2ewW/dyC5w4qfjF2az7gBzuFYeDtsXVzl8XK9tg3z1LPepXw3GionEfX+xbUZl6NqZiwxqlbFySSUMDzMVs7L8mmbOXCa9eMYltCTnYlNyzxxJF+ap9zkVmJkhEO3mraEA33s9tGpmN+avZohb/43kwo8qRu8L/9PXNFi7VkktxBFkryfzpDzF+y6te/WLGW0MXP74rQXwUkOvrvHzKxe5vWhDGUpm6WvfB+oQekAIX4S5HWFbAFA3bv2k90DEo3QSQPDmQFQjV6Y2y9WChJ4iaeFEOX5q2vVFQ= X-OriginatorOrg: analog.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 17 Sep 2019 14:21:19.4379 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: f7d3b2f2-be38-4107-8ff0-08d73b7a4f12 X-MS-Exchange-CrossTenant-Id: eaa689b4-8f87-40e0-9c6f-7228de4d754a X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=eaa689b4-8f87-40e0-9c6f-7228de4d754a; Ip=[137.71.25.55]; Helo=[nwd2mta1.analog.com] X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: DM6PR03MB4411 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.70,1.0.8 definitions=2019-09-17_07:2019-09-17,2019-09-17 signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxlogscore=999 priorityscore=1501 clxscore=1015 malwarescore=0 suspectscore=0 phishscore=0 lowpriorityscore=0 mlxscore=0 adultscore=0 bulkscore=0 spamscore=0 impostorscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-1908290000 definitions=main-1909170139 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Document the LTC2983 temperature sensor devicetree bindings. Signed-off-by: Nuno Sá --- Changes in v2: * Drop maxItems in non-array elements; * Set adi,mux-delay-config-us instead of adi,mux-delay-config; * Wrapped lines at 80 char; * Added comas to enum elements; * Use real units in adi,excitation-current; * Moved some enums to minimum and maximum; * Grouped patternProperties and moved reg property as a generic property. .../bindings/iio/temperature/adi,ltc2983.yaml | 406 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 407 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml new file mode 100644 index 000000000000..df68b8233e5e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -0,0 +1,406 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2983 Multi-sensor Temperature system + +maintainers: + - Nuno Sá + +description: | + Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System + https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf + +properties: + compatible: + enum: + - adi,ltc2983 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + adi,temperature-celcius: + description: + If this property is present, the temperature is reported in Celsius. + type: boolean + + adi,mux-delay-config-us: + description: + The LTC2983 performs 2 or 3 internal conversion cycles per temperature + result. Each conversion cycle is performed with different excitation and + input multiplexer configurations. Prior to each conversion, these + excitation circuits and input switch configurations are changed and an + internal 1ms delay ensures settling prior to the conversion cycle in most + cases. An extra delay can be configured using this property. The value is + rounded to nearest 100us. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 255 + + adi,filter-notch-freq: + description: + Set's the default setting of the digital filter. The default is + simultaneous 50/60Hz rejection. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 2 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + ".*@([1-9]|1[0-9]|20)$": + type: object + + properties: + reg: + description: | + The channel number. It can be connected to one of the 20 channels of + the device. + minimum: 1 + maximum: 20 + + required: + - reg + + patternProperties: + "^thermocouple@.*": + type: object + description: | + Represents a thermocouple sensor which is connected to one of the device + channels. + + properties: + adi,sensor-type: + description: | + Identifies the type of thermocouple connected to the device. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + - maximum: 8 + + adi,sensor-config: + description: | + Raw value which set's the sensor configuration. Look at table 14 + of the datasheet for how to set this value for thermocouples. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + - maximun: 15 + + adi,cold-junction-handle: + description: | + Phandle which points to a sensor object responsible for measuring + the thermocouple cold junction temperature. + $ref: "/schemas/types.yaml#/definitions/phandle" + + adi,custom-sensor: + description: | + This is a table, where each entry should be a pair of + voltage(mv)-temperature(K). The entries must be given in nv and uK + so that, the original values must be multiplied by 1000000. For + more details look at table 69 and 70. + allOf: + - $ref: /schemas/types.yaml#/definitions/int64-array + - minItems: 6 + - maxItems: 128 + + required: + - adi,sensor-type + + "^diode@.*": + type: object + description: | + Represents a diode sensor which is connected to one of the device + channels. + + properties: + adi,sensor-type: + description: Identifies the sensor as a diode. + const: 28 + + adi,sensor-config: + description: | + Raw value which set's the sensor configuration. Look at table 17 + of the datasheet for how to set this value for diodes. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 7 + + adi,excitation-current-microamp: + description: | + This property controls the magnitude of the excitation current + applied to the diode. Depending on the number of conversions + cycles, this property will assume different predefined values on + each cycle. Just set the value of the first cycle (1l). + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [10, 20, 40, 80] + + adi,ideal-factor-value: + description: | + This property sets the diode ideality factor. The real value must + be multiplied by 1000000 to remove the fractional part. For more + information look at table 20 of the datasheet. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - adi,sensor-type + + "^rtd@.*": + type: object + description: | + Represents a rtd sensor which is connected to one of the device channels. + + properties: + reg: + minimum: 2 + + adi,sensor-type: + description: Identifies the type of RTD connected to the device. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 10 + - maximum: 17 + + adi,rsense-handle: + description: | + Phandle pointing to a rsense object associated with this RTD. + $ref: "/schemas/types.yaml#/definitions/phandle" + + adi,sensor-config: + description: | + Raw value which set's the sensor configuration. Look at table 28 + of the datasheet for how to set this value for RTD's. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1, 4, 5, 8, 9, 10, 12, 13, 14] + + adi,excitation-current-microamp: + description: | + This property controls the magnitude of the excitation current + applied to the RTD. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [5, 10, 25, 50, 100, 250, 500, 1000] + + adi,rtd-curve: + description: | + This property set the RTD curve used and the corresponding + Callendar-VanDusen constants. Look at table 30 of the datasheet. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 3 + + adi,custom-sensor: + description: | + This is a table, where each entry should be a pair of + resistance(ohm)-temperature(K). The entries added here are in uohm + and uK. For more details values look at table 74 and 75. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64-array + - minItems: 6 + - maxItems: 128 + + required: + - adi,sensor-type + - adi,rsense-handle + + "^thermistor@.*": + type: object + description: | + Represents a thermistor sensor which is connected to one of the device + channels. + + properties: + adi,sensor-type: + description: | + Identifies the type of thermistor connected to the + device. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 19 + - maximum: 25 + + adi,rsense-handle: + description: | + Phandle pointing to a rsense object associated with this + thermistor. + $ref: "/schemas/types.yaml#/definitions/phandle" + + adi,sensor-config: + description: | + Raw value which set's the sensor configuration. Look at table 52 + of the datasheet for how to set this value for thermistors. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 4 + + adi,excitation-current-nanoamp: + description: | + This property controls the magnitude of the excitation current + applied to the thermistor. Value 0 set's the sensor in auto-range + mode. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, + 250000, 500000, 1000000] + + adi,custom-sensor: + description: | + This is a table, where each entry should be a pair of + resistance(ohm)-temperature(K). The entries added here are in uohm + and uK only for custom thermistors. For more details look at table + 78 and 79. Steinhart-Hart coefficients are also supported and can + be programmed into the device memory using this property. For + Steinhart sensors, this table has a constant size of 6 entries + (defining the coefficients) and the values are given in the raw + format. Look at table 82 for more information. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64-array + - minItems: 6 + - maxItems: 128 + + required: + - adi,sensor-type + - adi,rsense-handle + + "^adc@.*": + type: object + description: Represents a channel which is being used as a direct adc. + + properties: + adi,sensor-type: + description: Identifies the sensor as a direct adc. + const: 30 + + adi,single-ended: + description: Boolean property which set's the adc as single-ended. + type: boolean + + required: + - adi,sensor-type + + "^rsense@.*": + type: object + description: | + Represents a rsense which is connected to one of the device channels. + Rsense are used by thermistors and RTD's. + + properties: + reg: + minimum: 2 + + adi,sensor-type: + description: Identifies the sensor as a rsense. + const: 29 + + adi,rsense-val-micro-ohms: + description: | + Sets the value of the sense resistor. Look at table 20 of the + datasheet for information. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64 + + required: + - adi,sensor-type + - adi, rsense-val + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + sensor_ltc2983: ltc2983@0 { + compatible = "adi,ltc2983"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + adi,temperature-celcius; + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + + thermocouple@18 { + reg = <18>; + adi,sensor-type = <8>; //Type B + adi,sensor-config = <1>; //Differential, open-circuit current + adi,cold-junction-handle = <&diode5>; + }; + + diode5: diode@5 { + reg = <5>; + adi,sensor-type = <28>; + }; + + rsense2: rsense@2 { + reg = <2>; + adi,sensor-type = <29>; + adi,rsense-val-micro-ohms = /bits/ 64 <1200000000>; //1.2Kohms + }; + + rtd@14 { + reg = <14>; + adi,sensor-type = <15>; //PT1000 + /*2-wire, internal gnd, no current rotation*/ + adi,sensor-config = <1>; + adi,excitation-current = <7>; //500uA + adi,rsense-handle = <&rsense2>; + }; + + adc@10 { + reg = <10>; + adi,sensor-type = <30>; + adi,single-ended; + }; + + thermistor@12 { + reg = <12>; + adi,sensor-type = <26>; //Steinhart + adi,rsense-handle = <&rsense2>; + adi,custom-sensor = /bits/ 64 <0x00F371EC 0x12345678 + 0x2C0F8733 0x10018C66 0xA0FEACCD + 0x90021D99>; //6 entries + }; + + thermocouple@20 { + reg = <20>; + adi,sensor-type = <9>; //custom thermocouple + adi,sensor-config = <8>; //single-ended + adi,custom-sensor = /bits/ 64 + <(-50220000) 0 + (-30200000) 99100000 + (-5300000) 135400000 + 0 273150000 + 40200000 361200000 + 55300000 522100000 + 88300000 720300000 + 132200000 811200000 + 188700000 922500000 + 460400000 1000000000>; //10 pairs + }; + + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 14a256e785ca..f747a9dc27f5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9497,6 +9497,7 @@ W: http://ez.analog.com/community/linux-device-drivers L: linux-iio@vger.kernel.org S: Supported F: drivers/iio/temperature/ltc2983.c +F: Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml LTC4261 HARDWARE MONITOR DRIVER M: Guenter Roeck