From patchwork Mon Jul 1 18:12:38 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Guenter Roeck X-Patchwork-Id: 1125535 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=roeck-us.net Authentication-Results: ozlabs.org; dkim=fail reason="signature verification failed" (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="lKN80P5e"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 45cwTC5qRfz9sPQ for ; Tue, 2 Jul 2019 04:12:47 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727064AbfGASMm (ORCPT ); Mon, 1 Jul 2019 14:12:42 -0400 Received: from mail-pg1-f195.google.com ([209.85.215.195]:43472 "EHLO mail-pg1-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726846AbfGASMm (ORCPT ); Mon, 1 Jul 2019 14:12:42 -0400 Received: by mail-pg1-f195.google.com with SMTP id f25so6403006pgv.10; Mon, 01 Jul 2019 11:12:41 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=sender:from:to:cc:subject:date:message-id; bh=d2ulrH6/y7c43YiBTnz+FUUFg+v8yfVH30VHbNG6Npg=; b=lKN80P5ePaO8N+n1b3u2majjBrlDxaCq4qphKxVE97P33Tjktr2g722qyamOVws6N6 XoWKWl4OLid574c5LzQmpiYgzw1qF88HeK5apJ16FjMnZliGzOK3DbYcK7psWo3ImvOP bdc5YmiWZfQAeOTQRJ3rW4tL7bwWutHP2NCi/y9gECNkGbxb3AIrA+M/gYL16NtWuZ8H 1YsMvxOKlqANLsGP4BUtBiNLFRLEVQlFPE+nfYWrqcl87MAwc5G9FF3PEXDtRByjyTQs mvC1Fdrvh8qn9TorC95pdrvCNo1NPhNVl5Yd0iD+eRxkO1GEIBPAwzv/jXvUcTL+zdk1 /xkw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:sender:from:to:cc:subject:date:message-id; bh=d2ulrH6/y7c43YiBTnz+FUUFg+v8yfVH30VHbNG6Npg=; b=Zs4WtmZDatSxpkTuf5vr9FN3L89ebdzR+APaC+EBPQYfjD+HbRu6Bm2J09CxaAARR3 Nc/MgHS7E4H5JHHTA3PZRDNRVLBVJ//hWFOcodxQpVbaSD+sW9MPb0lSRmUJTRqpj5Dt jsKVyOLaDOJO/Luy9FWtohPH6lhD7axIYbGwYM3R6uogq5ZJkWAyOse4ysuOesTqzchl rlOueCagcr+Cl2MRIfEYwcH/SZve6TowQWVuQ2/LgXMGEkd76jis+ays3rfr0IJx9QQs 2VECB2THEvQlsJ8UZ384KG8Gn6t9mk8+6BBhO8Hij1/6UWPEEqmlXuMMhsayMp1b+qN2 OsGA== X-Gm-Message-State: APjAAAX8IZJaYLM0KQAPwfYdTDEvNHCTCrRmCdVqOxLzT4A+AWbvoqaG 0i3RRxP3AujS+pJBvbZdC68= X-Google-Smtp-Source: APXvYqzMwXofYeABAvy5w/11yDDQF8GqmHA/HQeql7OVIijTnc7jdogCsmUqkNB1xlADd220IiSf0w== X-Received: by 2002:a63:6089:: with SMTP id u131mr26865742pgb.314.1562004761244; Mon, 01 Jul 2019 11:12:41 -0700 (PDT) Received: from localhost ([2600:1700:e321:62f0:329c:23ff:fee3:9d7c]) by smtp.gmail.com with ESMTPSA id u16sm203449pjb.2.2019.07.01.11.12.40 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 01 Jul 2019 11:12:40 -0700 (PDT) From: Guenter Roeck To: Jonathan Cameron Cc: devicetree@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org, Guenter Roeck , Dirk Eibach Subject: [PATCH] hwmon: Remove ads1015 driver Date: Mon, 1 Jul 2019 11:12:38 -0700 Message-Id: <1562004758-13025-1-git-send-email-linux@roeck-us.net> X-Mailer: git-send-email 2.7.4 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org A driver for ADS1015 with more functionality is available in the iio subsystem. Remove the hwmon driver as duplicate. If the chip is used for hardware monitoring, the iio->hwmon bridge should be used. Cc: Dirk Eibach Signed-off-by: Guenter Roeck Acked-by: Jonathan Cameron Acked-by: Rob Herring --- Current plan is to queue this removal for v5.4 (not v5.3) in the hwmon tree. .../devicetree/bindings/hwmon/ads1015.txt | 73 ----- .../devicetree/bindings/iio/adc/ads1015.txt | 73 +++++ Documentation/hwmon/ads1015.rst | 90 ------ Documentation/hwmon/index.rst | 1 - MAINTAINERS | 8 - drivers/hwmon/Kconfig | 10 - drivers/hwmon/Makefile | 1 - drivers/hwmon/ads1015.c | 324 --------------------- drivers/iio/adc/Kconfig | 2 +- 9 files changed, 74 insertions(+), 508 deletions(-) delete mode 100644 Documentation/devicetree/bindings/hwmon/ads1015.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/ads1015.txt delete mode 100644 Documentation/hwmon/ads1015.rst delete mode 100644 drivers/hwmon/ads1015.c diff --git a/Documentation/devicetree/bindings/hwmon/ads1015.txt b/Documentation/devicetree/bindings/hwmon/ads1015.txt deleted file mode 100644 index 918a507d1159..000000000000 --- a/Documentation/devicetree/bindings/hwmon/ads1015.txt +++ /dev/null @@ -1,73 +0,0 @@ -ADS1015 (I2C) - -This device is a 12-bit A-D converter with 4 inputs. - -The inputs can be used single ended or in certain differential combinations. - -For configuration all possible combinations are mapped to 8 channels: - 0: Voltage over AIN0 and AIN1. - 1: Voltage over AIN0 and AIN3. - 2: Voltage over AIN1 and AIN3. - 3: Voltage over AIN2 and AIN3. - 4: Voltage over AIN0 and GND. - 5: Voltage over AIN1 and GND. - 6: Voltage over AIN2 and GND. - 7: Voltage over AIN3 and GND. - -Each channel can be configured individually: - - pga is the programmable gain amplifier (values are full scale) - 0: +/- 6.144 V - 1: +/- 4.096 V - 2: +/- 2.048 V (default) - 3: +/- 1.024 V - 4: +/- 0.512 V - 5: +/- 0.256 V - - data_rate in samples per second - 0: 128 - 1: 250 - 2: 490 - 3: 920 - 4: 1600 (default) - 5: 2400 - 6: 3300 - -1) The /ads1015 node - - Required properties: - - - compatible : must be "ti,ads1015" - - reg : I2C bus address of the device - - #address-cells : must be <1> - - #size-cells : must be <0> - - The node contains child nodes for each channel that the platform uses. - - Example ADS1015 node: - - ads1015@49 { - compatible = "ti,ads1015"; - reg = <0x49>; - #address-cells = <1>; - #size-cells = <0>; - - [ child node definitions... ] - } - -2) channel nodes - - Required properties: - - - reg : the channel number - - Optional properties: - - - ti,gain : the programmable gain amplifier setting - - ti,datarate : the converter data rate - - Example ADS1015 channel node: - - channel@4 { - reg = <4>; - ti,gain = <3>; - ti,datarate = <5>; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/ads1015.txt b/Documentation/devicetree/bindings/iio/adc/ads1015.txt new file mode 100644 index 000000000000..918a507d1159 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ads1015.txt @@ -0,0 +1,73 @@ +ADS1015 (I2C) + +This device is a 12-bit A-D converter with 4 inputs. + +The inputs can be used single ended or in certain differential combinations. + +For configuration all possible combinations are mapped to 8 channels: + 0: Voltage over AIN0 and AIN1. + 1: Voltage over AIN0 and AIN3. + 2: Voltage over AIN1 and AIN3. + 3: Voltage over AIN2 and AIN3. + 4: Voltage over AIN0 and GND. + 5: Voltage over AIN1 and GND. + 6: Voltage over AIN2 and GND. + 7: Voltage over AIN3 and GND. + +Each channel can be configured individually: + - pga is the programmable gain amplifier (values are full scale) + 0: +/- 6.144 V + 1: +/- 4.096 V + 2: +/- 2.048 V (default) + 3: +/- 1.024 V + 4: +/- 0.512 V + 5: +/- 0.256 V + - data_rate in samples per second + 0: 128 + 1: 250 + 2: 490 + 3: 920 + 4: 1600 (default) + 5: 2400 + 6: 3300 + +1) The /ads1015 node + + Required properties: + + - compatible : must be "ti,ads1015" + - reg : I2C bus address of the device + - #address-cells : must be <1> + - #size-cells : must be <0> + + The node contains child nodes for each channel that the platform uses. + + Example ADS1015 node: + + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + [ child node definitions... ] + } + +2) channel nodes + + Required properties: + + - reg : the channel number + + Optional properties: + + - ti,gain : the programmable gain amplifier setting + - ti,datarate : the converter data rate + + Example ADS1015 channel node: + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <5>; + }; diff --git a/Documentation/hwmon/ads1015.rst b/Documentation/hwmon/ads1015.rst deleted file mode 100644 index e0951c4e57bb..000000000000 --- a/Documentation/hwmon/ads1015.rst +++ /dev/null @@ -1,90 +0,0 @@ -Kernel driver ads1015 -===================== - -Supported chips: - - * Texas Instruments ADS1015 - - Prefix: 'ads1015' - - Datasheet: Publicly available at the Texas Instruments website: - - http://focus.ti.com/lit/ds/symlink/ads1015.pdf - - * Texas Instruments ADS1115 - - Prefix: 'ads1115' - - Datasheet: Publicly available at the Texas Instruments website: - - http://focus.ti.com/lit/ds/symlink/ads1115.pdf - -Authors: - Dirk Eibach, Guntermann & Drunck GmbH - -Description ------------ - -This driver implements support for the Texas Instruments ADS1015/ADS1115. - -This device is a 12/16-bit A-D converter with 4 inputs. - -The inputs can be used single ended or in certain differential combinations. - -The inputs can be made available by 8 sysfs input files in0_input - in7_input: - - - in0: Voltage over AIN0 and AIN1. - - in1: Voltage over AIN0 and AIN3. - - in2: Voltage over AIN1 and AIN3. - - in3: Voltage over AIN2 and AIN3. - - in4: Voltage over AIN0 and GND. - - in5: Voltage over AIN1 and GND. - - in6: Voltage over AIN2 and GND. - - in7: Voltage over AIN3 and GND. - -Which inputs are available can be configured using platform data or devicetree. - -By default all inputs are exported. - -Platform Data -------------- - -In linux/platform_data/ads1015.h platform data is defined, channel_data contains -configuration data for the used input combinations: - -- pga is the programmable gain amplifier (values are full scale) - - - 0: +/- 6.144 V - - 1: +/- 4.096 V - - 2: +/- 2.048 V - - 3: +/- 1.024 V - - 4: +/- 0.512 V - - 5: +/- 0.256 V - -- data_rate in samples per second - - - 0: 128 - - 1: 250 - - 2: 490 - - 3: 920 - - 4: 1600 - - 5: 2400 - - 6: 3300 - -Example:: - - struct ads1015_platform_data data = { - .channel_data = { - [2] = { .enabled = true, .pga = 1, .data_rate = 0 }, - [4] = { .enabled = true, .pga = 4, .data_rate = 5 }, - } - }; - -In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input -(FS +/- 0.512 V, 2400 SPS) would be created. - -Devicetree ----------- - -Configuration is also possible via devicetree: -Documentation/devicetree/bindings/hwmon/ads1015.txt diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index ee090e51653a..1d301d0e6f4d 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -30,7 +30,6 @@ Hardware Monitoring Kernel Drivers adm1031 adm1275 adm9240 - ads1015 ads7828 adt7410 adt7411 diff --git a/MAINTAINERS b/MAINTAINERS index 01a52fc964da..11744a3735f0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -517,14 +517,6 @@ W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/video/backlight/adp8860_bl.c -ADS1015 HARDWARE MONITOR DRIVER -M: Dirk Eibach -L: linux-hwmon@vger.kernel.org -S: Maintained -F: Documentation/hwmon/ads1015.rst -F: drivers/hwmon/ads1015.c -F: include/linux/platform_data/ads1015.h - ADT746X FAN DRIVER M: Colin Leroy S: Maintained diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 650dd71f9724..76cd0647ee2c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1570,16 +1570,6 @@ config SENSORS_ADC128D818 This driver can also be built as a module. If so, the module will be called adc128d818. -config SENSORS_ADS1015 - tristate "Texas Instruments ADS1015" - depends on I2C - help - If you say yes here you get support for Texas Instruments - ADS1015/ADS1115 12/16-bit 4-input ADC device. - - This driver can also be built as a module. If so, the module - will be called ads1015. - config SENSORS_ADS7828 tristate "Texas Instruments ADS7828 and compatibles" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 8db472ea04f0..6a52a964038b 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -35,7 +35,6 @@ obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o -obj-$(CONFIG_SENSORS_ADS1015) += ads1015.o obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o obj-$(CONFIG_SENSORS_ADS7871) += ads7871.o obj-$(CONFIG_SENSORS_ADT7X10) += adt7x10.o diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c deleted file mode 100644 index 3727a3762eb8..000000000000 --- a/drivers/hwmon/ads1015.c +++ /dev/null @@ -1,324 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ads1015.c - lm_sensors driver for ads1015 12-bit 4-input ADC - * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH - * - * Based on the ads7828 driver by Steve Hardy. - * - * Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads1015.pdf - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* ADS1015 registers */ -enum { - ADS1015_CONVERSION = 0, - ADS1015_CONFIG = 1, -}; - -/* PGA fullscale voltages in mV */ -static const unsigned int fullscale_table[8] = { - 6144, 4096, 2048, 1024, 512, 256, 256, 256 }; - -/* Data rates in samples per second */ -static const unsigned int data_rate_table_1015[8] = { - 128, 250, 490, 920, 1600, 2400, 3300, 3300 -}; - -static const unsigned int data_rate_table_1115[8] = { - 8, 16, 32, 64, 128, 250, 475, 860 -}; - -#define ADS1015_DEFAULT_CHANNELS 0xff -#define ADS1015_DEFAULT_PGA 2 -#define ADS1015_DEFAULT_DATA_RATE 4 - -enum ads1015_chips { - ads1015, - ads1115, -}; - -struct ads1015_data { - struct device *hwmon_dev; - struct mutex update_lock; /* mutex protect updates */ - struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; - enum ads1015_chips id; -}; - -static int ads1015_read_adc(struct i2c_client *client, unsigned int channel) -{ - u16 config; - struct ads1015_data *data = i2c_get_clientdata(client); - unsigned int pga = data->channel_data[channel].pga; - unsigned int data_rate = data->channel_data[channel].data_rate; - unsigned int conversion_time_ms; - const unsigned int * const rate_table = data->id == ads1115 ? - data_rate_table_1115 : data_rate_table_1015; - int res; - - mutex_lock(&data->update_lock); - - /* get channel parameters */ - res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG); - if (res < 0) - goto err_unlock; - config = res; - conversion_time_ms = DIV_ROUND_UP(1000, rate_table[data_rate]); - - /* setup and start single conversion */ - config &= 0x001f; - config |= (1 << 15) | (1 << 8); - config |= (channel & 0x0007) << 12; - config |= (pga & 0x0007) << 9; - config |= (data_rate & 0x0007) << 5; - - res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config); - if (res < 0) - goto err_unlock; - - /* wait until conversion finished */ - msleep(conversion_time_ms); - res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG); - if (res < 0) - goto err_unlock; - config = res; - if (!(config & (1 << 15))) { - /* conversion not finished in time */ - res = -EIO; - goto err_unlock; - } - - res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION); - -err_unlock: - mutex_unlock(&data->update_lock); - return res; -} - -static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel, - s16 reg) -{ - struct ads1015_data *data = i2c_get_clientdata(client); - unsigned int pga = data->channel_data[channel].pga; - int fullscale = fullscale_table[pga]; - const int mask = data->id == ads1115 ? 0x7fff : 0x7ff0; - - return DIV_ROUND_CLOSEST(reg * fullscale, mask); -} - -/* sysfs callback function */ -static ssize_t in_show(struct device *dev, struct device_attribute *da, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct i2c_client *client = to_i2c_client(dev); - int res; - int index = attr->index; - - res = ads1015_read_adc(client, index); - if (res < 0) - return res; - - return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res)); -} - -static const struct sensor_device_attribute ads1015_in[] = { - SENSOR_ATTR_RO(in0_input, in, 0), - SENSOR_ATTR_RO(in1_input, in, 1), - SENSOR_ATTR_RO(in2_input, in, 2), - SENSOR_ATTR_RO(in3_input, in, 3), - SENSOR_ATTR_RO(in4_input, in, 4), - SENSOR_ATTR_RO(in5_input, in, 5), - SENSOR_ATTR_RO(in6_input, in, 6), - SENSOR_ATTR_RO(in7_input, in, 7), -}; - -/* - * Driver interface - */ - -static int ads1015_remove(struct i2c_client *client) -{ - struct ads1015_data *data = i2c_get_clientdata(client); - int k; - - hwmon_device_unregister(data->hwmon_dev); - for (k = 0; k < ADS1015_CHANNELS; ++k) - device_remove_file(&client->dev, &ads1015_in[k].dev_attr); - return 0; -} - -#ifdef CONFIG_OF -static int ads1015_get_channels_config_of(struct i2c_client *client) -{ - struct ads1015_data *data = i2c_get_clientdata(client); - struct device_node *node; - - if (!client->dev.of_node - || !of_get_next_child(client->dev.of_node, NULL)) - return -EINVAL; - - for_each_child_of_node(client->dev.of_node, node) { - u32 pval; - unsigned int channel; - unsigned int pga = ADS1015_DEFAULT_PGA; - unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE; - - if (of_property_read_u32(node, "reg", &pval)) { - dev_err(&client->dev, "invalid reg on %pOF\n", node); - continue; - } - - channel = pval; - if (channel >= ADS1015_CHANNELS) { - dev_err(&client->dev, - "invalid channel index %d on %pOF\n", - channel, node); - continue; - } - - if (!of_property_read_u32(node, "ti,gain", &pval)) { - pga = pval; - if (pga > 6) { - dev_err(&client->dev, "invalid gain on %pOF\n", - node); - return -EINVAL; - } - } - - if (!of_property_read_u32(node, "ti,datarate", &pval)) { - data_rate = pval; - if (data_rate > 7) { - dev_err(&client->dev, - "invalid data_rate on %pOF\n", node); - return -EINVAL; - } - } - - data->channel_data[channel].enabled = true; - data->channel_data[channel].pga = pga; - data->channel_data[channel].data_rate = data_rate; - } - - return 0; -} -#endif - -static void ads1015_get_channels_config(struct i2c_client *client) -{ - unsigned int k; - struct ads1015_data *data = i2c_get_clientdata(client); - struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev); - - /* prefer platform data */ - if (pdata) { - memcpy(data->channel_data, pdata->channel_data, - sizeof(data->channel_data)); - return; - } - -#ifdef CONFIG_OF - if (!ads1015_get_channels_config_of(client)) - return; -#endif - - /* fallback on default configuration */ - for (k = 0; k < ADS1015_CHANNELS; ++k) { - data->channel_data[k].enabled = true; - data->channel_data[k].pga = ADS1015_DEFAULT_PGA; - data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE; - } -} - -static int ads1015_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct ads1015_data *data; - int err; - unsigned int k; - - data = devm_kzalloc(&client->dev, sizeof(struct ads1015_data), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - if (client->dev.of_node) - data->id = (enum ads1015_chips) - of_device_get_match_data(&client->dev); - else - data->id = id->driver_data; - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - - /* build sysfs attribute group */ - ads1015_get_channels_config(client); - for (k = 0; k < ADS1015_CHANNELS; ++k) { - if (!data->channel_data[k].enabled) - continue; - err = device_create_file(&client->dev, &ads1015_in[k].dev_attr); - if (err) - goto exit_remove; - } - - data->hwmon_dev = hwmon_device_register(&client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove; - } - - return 0; - -exit_remove: - for (k = 0; k < ADS1015_CHANNELS; ++k) - device_remove_file(&client->dev, &ads1015_in[k].dev_attr); - return err; -} - -static const struct i2c_device_id ads1015_id[] = { - { "ads1015", ads1015}, - { "ads1115", ads1115}, - { } -}; -MODULE_DEVICE_TABLE(i2c, ads1015_id); - -static const struct of_device_id __maybe_unused ads1015_of_match[] = { - { - .compatible = "ti,ads1015", - .data = (void *)ads1015 - }, - { - .compatible = "ti,ads1115", - .data = (void *)ads1115 - }, - { }, -}; -MODULE_DEVICE_TABLE(of, ads1015_of_match); - -static struct i2c_driver ads1015_driver = { - .driver = { - .name = "ads1015", - .of_match_table = of_match_ptr(ads1015_of_match), - }, - .probe = ads1015_probe, - .remove = ads1015_remove, - .id_table = ads1015_id, -}; - -module_i2c_driver(ads1015_driver); - -MODULE_AUTHOR("Dirk Eibach "); -MODULE_DESCRIPTION("ADS1015 driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index f96a7702b020..47d073006a13 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -958,7 +958,7 @@ config TI_ADC161S626 config TI_ADS1015 tristate "Texas Instruments ADS1015 ADC" - depends on I2C && !SENSORS_ADS1015 + depends on I2C select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER