From patchwork Mon Apr 29 00:16:55 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092371 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="jxb2kBE8"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44slcL1ws1z9s7T for ; Mon, 29 Apr 2019 10:18:10 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726990AbfD2ASI (ORCPT ); Sun, 28 Apr 2019 20:18:08 -0400 Received: from mail-wm1-f67.google.com ([209.85.128.67]:37477 "EHLO mail-wm1-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726602AbfD2ASG (ORCPT ); Sun, 28 Apr 2019 20:18:06 -0400 Received: by mail-wm1-f67.google.com with SMTP id y5so12108161wma.2; Sun, 28 Apr 2019 17:18:03 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=KkaAxwd97wwTaARTV5x8DDdbMHY9W1GA1YNkQGVL3tg=; b=jxb2kBE89YtCj9H8JobuVqkgIMC/yr/2wx52juhbF0ZHFCkXGPyjygT5dwbS6zHSdK nWGIBTxsK4Ro+0JDxt2Io+NVu6Wx7Hhzjn2Hnzjbr1FSlaS2FyWWMddHqMG7KXKhIwP+ f92PZ58URWEV9klmhJ/RGYjJ18U0gIGSQfTRYyjBZ++w1Wvbpf9C4C/Ho4SP/qFX6xyY nIjA3BO0KNjkvcqsbUzshkunJ4+bHLdwtIFCWqGGpRNtlrwFCmgbCYnsYQHozl7DhpNR lNknZNw3kNarc5z0mifMzBM7AVjDi+rEBrQ/Z8xbsLHvEshWio+boeLosaqK8Dv9a1mY vRXQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=KkaAxwd97wwTaARTV5x8DDdbMHY9W1GA1YNkQGVL3tg=; b=kbbZ9naqyyaJjqMH4SKwhPT4LD0/TaRpLunD+ODtemw5UemuowOEBOZZtmYBucCcLR k3qoIeoSiFMORH+lvaTkZyOBg2sn46mtUCPhdy1WYblTHpiBOEES7tzc87egkwWi++j8 HX2ILtc5BV7aOfR0MaPzVxmJ0gEJ9ZvLN8PbP6VEHosPV3Ov1QFiVhMLY4b5udiWV7VT GB7Dn7ANA0v8M5P+/aKRpPf3HUsrA2pxlAd5w8EkansZNNHZf9A623droN1YwBX0HWxT TcrCOEJMsuhYgq4G6e7fvHacjLuRRLugdkZ35T4SxAYGNQn28rzlG5IV5RypoZanoULg SMWg== X-Gm-Message-State: APjAAAV8ehwCrsXEykLpQHy9v/6ZPmsCq2aQPllI9slLvaxMGUYGHdVO zoE+ac9FNTtsJcELFcQ17u0= X-Google-Smtp-Source: APXvYqzl5fdOUMUT0G1BS3RnN6e+7ZJuVyXKg9ji8oochcPhfTVKYV98UOJyWofrVctoA1CSBmzKLQ== X-Received: by 2002:a1c:730c:: with SMTP id d12mr14638993wmb.47.1556497082891; Sun, 28 Apr 2019 17:18:02 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.01 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:02 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 01/12] lib: Add support for generic packing operations Date: Mon, 29 Apr 2019 03:16:55 +0300 Message-Id: <20190429001706.7449-2-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org This provides an unified API for accessing register bit fields regardless of memory layout. The basic unit of data for these API functions is the u64. The process of transforming an u64 from native CPU encoding into the peripheral's encoding is called 'pack', and transforming it from peripheral to native CPU encoding is 'unpack'. Signed-off-by: Vladimir Oltean --- Changes in v4: None Changes in v3: None Changes in v2: None Documentation/packing.txt | 150 +++++++++++++++++++++++++++ MAINTAINERS | 8 ++ include/linux/packing.h | 49 +++++++++ lib/Makefile | 2 +- lib/packing.c | 211 ++++++++++++++++++++++++++++++++++++++ 5 files changed, 419 insertions(+), 1 deletion(-) create mode 100644 Documentation/packing.txt create mode 100644 include/linux/packing.h create mode 100644 lib/packing.c diff --git a/Documentation/packing.txt b/Documentation/packing.txt new file mode 100644 index 000000000000..32eba9d23611 --- /dev/null +++ b/Documentation/packing.txt @@ -0,0 +1,150 @@ +============================================= +Generic field packing and unpacking functions +============================================= + +Problem statement +----------------- + +When working with hardware, one has to choose between several approaches of +interfacing with it. +One can memory-map a pointer to a carefully crafted struct over the hardware +device's memory region, and access its fields as struct members (potentially +declared as bit fields). But writing code this way would make it less portable, +due to potential endianness mismatches between the CPU and the hardware device. +Additionally, one has to pay close attention when translating register +definitions from the hardware documentation into bit field indices for the +structs. Also, some hardware (typically networking equipment) tends to group +its register fields in ways that violate any reasonable word boundaries +(sometimes even 64 bit ones). This creates the inconvenience of having to +define "high" and "low" portions of register fields within the struct. +A more robust alternative to struct field definitions would be to extract the +required fields by shifting the appropriate number of bits. But this would +still not protect from endianness mismatches, except if all memory accesses +were performed byte-by-byte. Also the code can easily get cluttered, and the +high-level idea might get lost among the many bit shifts required. +Many drivers take the bit-shifting approach and then attempt to reduce the +clutter with tailored macros, but more often than not these macros take +shortcuts that still prevent the code from being truly portable. + +The solution +------------ + +This API deals with 2 basic operations: + - Packing a CPU-usable number into a memory buffer (with hardware + constraints/quirks) + - Unpacking a memory buffer (which has hardware constraints/quirks) + into a CPU-usable number. + +The API offers an abstraction over said hardware constraints and quirks, +over CPU endianness and therefore between possible mismatches between +the two. + +The basic unit of these API functions is the u64. From the CPU's +perspective, bit 63 always means bit offset 7 of byte 7, albeit only +logically. The question is: where do we lay this bit out in memory? + +The following examples cover the memory layout of a packed u64 field. +The byte offsets in the packed buffer are always implicitly 0, 1, ... 7. +What the examples show is where the logical bytes and bits sit. + +1. Normally (no quirks), we would do it like this: + +63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 +7 6 5 4 +31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 +3 2 1 0 + +That is, the MSByte (7) of the CPU-usable u64 sits at memory offset 0, and the +LSByte (0) of the u64 sits at memory offset 7. +This corresponds to what most folks would regard to as "big endian", where +bit i corresponds to the number 2^i. This is also referred to in the code +comments as "logical" notation. + + +2. If QUIRK_MSB_ON_THE_RIGHT is set, we do it like this: + +56 57 58 59 60 61 62 63 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47 32 33 34 35 36 37 38 39 +7 6 5 4 +24 25 26 27 28 29 30 31 16 17 18 19 20 21 22 23 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7 +3 2 1 0 + +That is, QUIRK_MSB_ON_THE_RIGHT does not affect byte positioning, but +inverts bit offsets inside a byte. + + +3. If QUIRK_LITTLE_ENDIAN is set, we do it like this: + +39 38 37 36 35 34 33 32 47 46 45 44 43 42 41 40 55 54 53 52 51 50 49 48 63 62 61 60 59 58 57 56 +4 5 6 7 +7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24 +0 1 2 3 + +Therefore, QUIRK_LITTLE_ENDIAN means that inside the memory region, every +byte from each 4-byte word is placed at its mirrored position compared to +the boundary of that word. + +4. If QUIRK_MSB_ON_THE_RIGHT and QUIRK_LITTLE_ENDIAN are both set, we do it + like this: + +32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 +4 5 6 7 +0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 +0 1 2 3 + + +5. If just QUIRK_LSW32_IS_FIRST is set, we do it like this: + +31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 +3 2 1 0 +63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 +7 6 5 4 + +In this case the 8 byte memory region is interpreted as follows: first +4 bytes correspond to the least significant 4-byte word, next 4 bytes to +the more significant 4-byte word. + + +6. If QUIRK_LSW32_IS_FIRST and QUIRK_MSB_ON_THE_RIGHT are set, we do it like + this: + +24 25 26 27 28 29 30 31 16 17 18 19 20 21 22 23 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7 +3 2 1 0 +56 57 58 59 60 61 62 63 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47 32 33 34 35 36 37 38 39 +7 6 5 4 + + +7. If QUIRK_LSW32_IS_FIRST and QUIRK_LITTLE_ENDIAN are set, it looks like + this: + +7 6 5 4 3 2 1 0 15 14 13 12 11 10 9 8 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24 +0 1 2 3 +39 38 37 36 35 34 33 32 47 46 45 44 43 42 41 40 55 54 53 52 51 50 49 48 63 62 61 60 59 58 57 56 +4 5 6 7 + + +8. If QUIRK_LSW32_IS_FIRST, QUIRK_LITTLE_ENDIAN and QUIRK_MSB_ON_THE_RIGHT + are set, it looks like this: + +0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 +0 1 2 3 +32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 +4 5 6 7 + + +We always think of our offsets as if there were no quirk, and we translate +them afterwards, before accessing the memory region. + +Intended use +------------ + +Drivers that opt to use this API first need to identify which of the above 3 +quirk combinations (for a total of 8) match what the hardware documentation +describes. Then they should wrap the packing() function, creating a new +xxx_packing() that calls it using the proper QUIRK_* one-hot bits set. + +The packing() function returns an int-encoded error code, which protects the +programmer against incorrect API use. The errors are not expected to occur +durring runtime, therefore it is reasonable for xxx_packing() to return void +and simply swallow those errors. Optionally it can dump stack or print the +error description. + diff --git a/MAINTAINERS b/MAINTAINERS index 0af66fa919a8..ff029f3d0f13 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11673,6 +11673,14 @@ L: linux-i2c@vger.kernel.org S: Orphan F: drivers/i2c/busses/i2c-pasemi.c +PACKING +M: Vladimir Oltean +L: netdev@vger.kernel.org +S: Supported +F: lib/packing.c +F: include/linux/packing.h +F: Documentation/packing.txt + PADATA PARALLEL EXECUTION MECHANISM M: Steffen Klassert L: linux-crypto@vger.kernel.org diff --git a/include/linux/packing.h b/include/linux/packing.h new file mode 100644 index 000000000000..cc646e4f5df1 --- /dev/null +++ b/include/linux/packing.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean + */ +#ifndef _LINUX_PACKING_H +#define _LINUX_PACKING_H + +#include +#include + +#define QUIRK_MSB_ON_THE_RIGHT BIT(0) +#define QUIRK_LITTLE_ENDIAN BIT(1) +#define QUIRK_LSW32_IS_FIRST BIT(2) + +enum packing_op { + PACK, + UNPACK, +}; + +/** + * packing - Convert numbers (currently u64) between a packed and an unpacked + * format. Unpacked means laid out in memory in the CPU's native + * understanding of integers, while packed means anything else that + * requires translation. + * + * @pbuf: Pointer to a buffer holding the packed value. + * @uval: Pointer to an u64 holding the unpacked value. + * @startbit: The index (in logical notation, compensated for quirks) where + * the packed value starts within pbuf. Must be larger than, or + * equal to, endbit. + * @endbit: The index (in logical notation, compensated for quirks) where + * the packed value ends within pbuf. Must be smaller than, or equal + * to, startbit. + * @op: If PACK, then uval will be treated as const pointer and copied (packed) + * into pbuf, between startbit and endbit. + * If UNPACK, then pbuf will be treated as const pointer and the logical + * value between startbit and endbit will be copied (unpacked) to uval. + * @quirks: A bit mask of QUIRK_LITTLE_ENDIAN, QUIRK_LSW32_IS_FIRST and + * QUIRK_MSB_ON_THE_RIGHT. + * + * Return: 0 on success, EINVAL or ERANGE if called incorrectly. Assuming + * correct usage, return code may be discarded. + * If op is PACK, pbuf is modified. + * If op is UNPACK, uval is modified. + */ +int packing(void *pbuf, u64 *uval, int startbit, int endbit, size_t pbuflen, + enum packing_op op, u8 quirks); + +#endif diff --git a/lib/Makefile b/lib/Makefile index 3b08673e8881..ae4b1f52c1ec 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -37,7 +37,7 @@ obj-y += bcd.o div64.o sort.o parser.o debug_locks.o random32.o \ bust_spinlocks.o kasprintf.o bitmap.o scatterlist.o \ gcd.o lcm.o list_sort.o uuid.o iov_iter.o clz_ctz.o \ bsearch.o find_bit.o llist.o memweight.o kfifo.o \ - percpu-refcount.o rhashtable.o reciprocal_div.o \ + packing.o percpu-refcount.o rhashtable.o reciprocal_div.o \ once.o refcount.o usercopy.o errseq.o bucket_locks.o \ generic-radix-tree.o obj-$(CONFIG_STRING_SELFTEST) += test_string.o diff --git a/lib/packing.c b/lib/packing.c new file mode 100644 index 000000000000..2d0bfd78bfe9 --- /dev/null +++ b/lib/packing.c @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean + */ +#include +#include +#include +#include +#include + +static int get_le_offset(int offset) +{ + int closest_multiple_of_4; + + closest_multiple_of_4 = (offset / 4) * 4; + offset -= closest_multiple_of_4; + return closest_multiple_of_4 + (3 - offset); +} + +static int get_reverse_lsw32_offset(int offset, size_t len) +{ + int closest_multiple_of_4; + int word_index; + + word_index = offset / 4; + closest_multiple_of_4 = word_index * 4; + offset -= closest_multiple_of_4; + word_index = (len / 4) - word_index - 1; + return word_index * 4 + offset; +} + +static u64 bit_reverse(u64 val, unsigned int width) +{ + u64 new_val = 0; + unsigned int bit; + unsigned int i; + + for (i = 0; i < width; i++) { + bit = (val & (1 << i)) != 0; + new_val |= (bit << (width - i - 1)); + } + return new_val; +} + +static void adjust_for_msb_right_quirk(u64 *to_write, int *box_start_bit, + int *box_end_bit, u8 *box_mask) +{ + int box_bit_width = *box_start_bit - *box_end_bit + 1; + int new_box_start_bit, new_box_end_bit; + + *to_write >>= *box_end_bit; + *to_write = bit_reverse(*to_write, box_bit_width); + *to_write <<= *box_end_bit; + + new_box_end_bit = box_bit_width - *box_start_bit - 1; + new_box_start_bit = box_bit_width - *box_end_bit - 1; + *box_mask = GENMASK_ULL(new_box_start_bit, new_box_end_bit); + *box_start_bit = new_box_start_bit; + *box_end_bit = new_box_end_bit; +} + +/** + * packing - Convert numbers (currently u64) between a packed and an unpacked + * format. Unpacked means laid out in memory in the CPU's native + * understanding of integers, while packed means anything else that + * requires translation. + * + * @pbuf: Pointer to a buffer holding the packed value. + * @uval: Pointer to an u64 holding the unpacked value. + * @startbit: The index (in logical notation, compensated for quirks) where + * the packed value starts within pbuf. Must be larger than, or + * equal to, endbit. + * @endbit: The index (in logical notation, compensated for quirks) where + * the packed value ends within pbuf. Must be smaller than, or equal + * to, startbit. + * @op: If PACK, then uval will be treated as const pointer and copied (packed) + * into pbuf, between startbit and endbit. + * If UNPACK, then pbuf will be treated as const pointer and the logical + * value between startbit and endbit will be copied (unpacked) to uval. + * @quirks: A bit mask of QUIRK_LITTLE_ENDIAN, QUIRK_LSW32_IS_FIRST and + * QUIRK_MSB_ON_THE_RIGHT. + * + * Return: 0 on success, EINVAL or ERANGE if called incorrectly. Assuming + * correct usage, return code may be discarded. + * If op is PACK, pbuf is modified. + * If op is UNPACK, uval is modified. + */ +int packing(void *pbuf, u64 *uval, int startbit, int endbit, size_t pbuflen, + enum packing_op op, u8 quirks) +{ + /* Number of bits for storing "uval" + * also width of the field to access in the pbuf + */ + u64 value_width; + /* Logical byte indices corresponding to the + * start and end of the field. + */ + int plogical_first_u8, plogical_last_u8, box; + + /* startbit is expected to be larger than endbit */ + if (startbit < endbit) + /* Invalid function call */ + return -EINVAL; + + value_width = startbit - endbit + 1; + if (value_width > 64) + return -ERANGE; + + /* Check if "uval" fits in "value_width" bits. + * If value_width is 64, the check will fail, but any + * 64-bit uval will surely fit. + */ + if (op == PACK && value_width < 64 && (*uval >= (1ull << value_width))) + /* Cannot store "uval" inside "value_width" bits. + * Truncating "uval" is most certainly not desirable, + * so simply erroring out is appropriate. + */ + return -ERANGE; + + /* Initialize parameter */ + if (op == UNPACK) + *uval = 0; + + /* Iterate through an idealistic view of the pbuf as an u64 with + * no quirks, u8 by u8 (aligned at u8 boundaries), from high to low + * logical bit significance. "box" denotes the current logical u8. + */ + plogical_first_u8 = startbit / 8; + plogical_last_u8 = endbit / 8; + + for (box = plogical_first_u8; box >= plogical_last_u8; box--) { + /* Bit indices into the currently accessed 8-bit box */ + int box_start_bit, box_end_bit, box_addr; + u8 box_mask; + /* Corresponding bits from the unpacked u64 parameter */ + int proj_start_bit, proj_end_bit; + u64 proj_mask; + + /* This u8 may need to be accessed in its entirety + * (from bit 7 to bit 0), or not, depending on the + * input arguments startbit and endbit. + */ + if (box == plogical_first_u8) + box_start_bit = startbit % 8; + else + box_start_bit = 7; + if (box == plogical_last_u8) + box_end_bit = endbit % 8; + else + box_end_bit = 0; + + /* We have determined the box bit start and end. + * Now we calculate where this (masked) u8 box would fit + * in the unpacked (CPU-readable) u64 - the u8 box's + * projection onto the unpacked u64. Though the + * box is u8, the projection is u64 because it may fall + * anywhere within the unpacked u64. + */ + proj_start_bit = ((box * 8) + box_start_bit) - endbit; + proj_end_bit = ((box * 8) + box_end_bit) - endbit; + proj_mask = GENMASK_ULL(proj_start_bit, proj_end_bit); + box_mask = GENMASK_ULL(box_start_bit, box_end_bit); + + /* Determine the offset of the u8 box inside the pbuf, + * adjusted for quirks. The adjusted box_addr will be used for + * effective addressing inside the pbuf (so it's not + * logical any longer). + */ + box_addr = pbuflen - box - 1; + if (quirks & QUIRK_LITTLE_ENDIAN) + box_addr = get_le_offset(box_addr); + if (quirks & QUIRK_LSW32_IS_FIRST) + box_addr = get_reverse_lsw32_offset(box_addr, + pbuflen); + + if (op == UNPACK) { + u64 pval; + + /* Read from pbuf, write to uval */ + pval = ((u8 *)pbuf)[box_addr] & box_mask; + if (quirks & QUIRK_MSB_ON_THE_RIGHT) + adjust_for_msb_right_quirk(&pval, + &box_start_bit, + &box_end_bit, + &box_mask); + + pval >>= box_end_bit; + pval <<= proj_end_bit; + *uval &= ~proj_mask; + *uval |= pval; + } else { + u64 pval; + + /* Write to pbuf, read from uval */ + pval = (*uval) & proj_mask; + pval >>= proj_end_bit; + if (quirks & QUIRK_MSB_ON_THE_RIGHT) + adjust_for_msb_right_quirk(&pval, + &box_start_bit, + &box_end_bit, + &box_mask); + + pval <<= box_end_bit; + ((u8 *)pbuf)[box_addr] &= ~box_mask; + ((u8 *)pbuf)[box_addr] |= pval; + } + } + return 0; +} +EXPORT_SYMBOL(packing); + From patchwork Mon Apr 29 00:16:56 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092378 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="Lq06HZEQ"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44sldL2XdWz9s6w for ; Mon, 29 Apr 2019 10:19:02 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727312AbfD2ASh (ORCPT ); Sun, 28 Apr 2019 20:18:37 -0400 Received: from mail-wm1-f65.google.com ([209.85.128.65]:36552 "EHLO mail-wm1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726945AbfD2ASN (ORCPT ); Sun, 28 Apr 2019 20:18:13 -0400 Received: by mail-wm1-f65.google.com with SMTP id h18so13080117wml.1; Sun, 28 Apr 2019 17:18:06 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=rDfmWWbN3jc2I7xLXTe7Mfs36oh30dxN9dBfBGdGcb4=; b=Lq06HZEQoofIhl8r6VXWOE1GedID6edZR6eFVotLJbmfej5pC1Pyz5DvEcIqXXzaXI tTo+HDfT9Tz2zz8bioLMBcrrPYHq5zZNMqUFbHF0cxttcSBQqqSiH/Pkt3IZQ3mN2t4E nUIjpXmCeBjIML0ao71JQcPdIE7C5Mv91dRI71wlheGOI2kjQbPK1JjffHqgj8INfCyC tsE7Y3IsnwERK4m3LjdsTvV2A1+q97YI82AKJKUsCIG24/ncs4rEGZ6SfARufRklpRfi YFUmeI115GwmVu/nNAHLxnEnf/RuZmef9pNYpvsGLq9IxFOncvG+zVYHwU3iWAs5fe9m erPw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=rDfmWWbN3jc2I7xLXTe7Mfs36oh30dxN9dBfBGdGcb4=; b=tiX72+dRfI2viGwULJXdCijama1xvy29aQ7/K+/ngOw9AbRgWUCvdpRLBlEPGksIit Z3W5wmEC10j8kRKfhvkkxFOOl5jJu5NH6bIBtI5eaSfJxzNoo3mPoaaavAaWrwSCRPDG FdMynDChksbBLL+Ja0Uni/YYhvX9fb1X4C9x/HHS2bGfUBSgLjB1rQcAW2pNuzf3fr+4 iV1oifnZFoZ2zlWVQMWKzsRz0/InqeEEPW34bpZOmoML8GzYK5h+D1lGlz2/1vhEQjwX 6h3CyYUMyjcUUXZArzZDoAv0JX1RvXlD2SiUh4AP5c5jF3Sv8hrdO3guo2UcaLrcc2Xq bGbQ== X-Gm-Message-State: APjAAAX5UdzFtq93ujPzwyQG5p8R4i5ab3wSet7EgN9/XjNllXG2XaTe BbTFPcPlbWL8aCNNhfFVIug5DVrrOI0= X-Google-Smtp-Source: APXvYqzfIZt+IXAD46yamSfI6Ll5PP8QuJEFb+VoGl7HI6ZwYTYAp/Oz34cPvk+FzFebvBZBIJ45Pw== X-Received: by 2002:a7b:c923:: with SMTP id h3mr15113787wml.34.1556497084132; Sun, 28 Apr 2019 17:18:04 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.02 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:03 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean , Georg Waibel Subject: [PATCH v4 net-next 02/12] net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch Date: Mon, 29 Apr 2019 03:16:56 +0300 Message-Id: <20190429001706.7449-3-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org At this moment the following is supported: * Link state management through phylib * Autonomous L2 forwarding managed through iproute2 bridge commands. IP termination must be done currently through the master netdevice, since the switch is unmanaged at this point and using DSA_TAG_PROTO_NONE. Signed-off-by: Vladimir Oltean Signed-off-by: Georg Waibel Acked-by: Florian Fainelli --- Changes in v4: Rehashed all preprocessor definitions to be prefixed with SJA1105 except OP_READ, OP_WRITE and OP_DEL. Changes in v3: None. Changes in v2: 1. Device ID is no longer auto-detected but enforced based on explicit DT compatible string. This helps with stricter checking of DT bindings. 2. Group all device-specific operations into a sja1105_info structure and avoid using the IS_ET() and IS_PQRS() macros at runtime as much as possible. 5. Miscellaneous cosmetic cleanup in sja1105_clocking.c MAINTAINERS | 6 + drivers/net/dsa/Kconfig | 2 + drivers/net/dsa/Makefile | 1 + drivers/net/dsa/sja1105/Kconfig | 15 + drivers/net/dsa/sja1105/Makefile | 9 + drivers/net/dsa/sja1105/sja1105.h | 139 +++ drivers/net/dsa/sja1105/sja1105_clocking.c | 599 +++++++++++ .../net/dsa/sja1105/sja1105_dynamic_config.c | 489 +++++++++ .../net/dsa/sja1105/sja1105_dynamic_config.h | 43 + drivers/net/dsa/sja1105/sja1105_main.c | 928 +++++++++++++++++ drivers/net/dsa/sja1105/sja1105_spi.c | 554 ++++++++++ .../net/dsa/sja1105/sja1105_static_config.c | 950 ++++++++++++++++++ .../net/dsa/sja1105/sja1105_static_config.h | 251 +++++ include/linux/dsa/sja1105.h | 19 + 14 files changed, 4005 insertions(+) create mode 100644 drivers/net/dsa/sja1105/Kconfig create mode 100644 drivers/net/dsa/sja1105/Makefile create mode 100644 drivers/net/dsa/sja1105/sja1105.h create mode 100644 drivers/net/dsa/sja1105/sja1105_clocking.c create mode 100644 drivers/net/dsa/sja1105/sja1105_dynamic_config.c create mode 100644 drivers/net/dsa/sja1105/sja1105_dynamic_config.h create mode 100644 drivers/net/dsa/sja1105/sja1105_main.c create mode 100644 drivers/net/dsa/sja1105/sja1105_spi.c create mode 100644 drivers/net/dsa/sja1105/sja1105_static_config.c create mode 100644 drivers/net/dsa/sja1105/sja1105_static_config.h create mode 100644 include/linux/dsa/sja1105.h diff --git a/MAINTAINERS b/MAINTAINERS index ff029f3d0f13..25db3db8fe38 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11120,6 +11120,12 @@ S: Maintained F: Documentation/devicetree/bindings/sound/sgtl5000.txt F: sound/soc/codecs/sgtl5000* +NXP SJA1105 ETHERNET SWITCH DRIVER +M: Vladimir Oltean +L: linux-kernel@vger.kernel.org +S: Maintained +F: drivers/net/dsa/sja1105 + NXP TDA998X DRM DRIVER M: Russell King S: Maintained diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 71bb3aebded4..d38e7e00c4e8 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -51,6 +51,8 @@ source "drivers/net/dsa/microchip/Kconfig" source "drivers/net/dsa/mv88e6xxx/Kconfig" +source "drivers/net/dsa/sja1105/Kconfig" + config NET_DSA_QCA8K tristate "Qualcomm Atheros QCA8K Ethernet switch family support" depends on NET_DSA diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 82e5d794c41f..fefb6aaa82ba 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx.o obj-y += b53/ obj-y += microchip/ obj-y += mv88e6xxx/ +obj-y += sja1105/ diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig new file mode 100644 index 000000000000..f3d8466fc3c1 --- /dev/null +++ b/drivers/net/dsa/sja1105/Kconfig @@ -0,0 +1,15 @@ +config NET_DSA_SJA1105 +tristate "NXP SJA1105 Ethernet switch family support" + depends on NET_DSA && SPI + help + This is the driver for the NXP SJA1105 automotive Ethernet switch + family. These are 5-port devices and are managed over an SPI + interface. Probing is handled based on OF bindings and so is the + linkage to phylib. The driver supports the following revisions: + - SJA1105E (Gen. 1, No TT-Ethernet) + - SJA1105T (Gen. 1, TT-Ethernet) + - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet) + - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet) + - SJA1105R (Gen. 2, SGMII, No TT-Ethernet) + - SJA1105S (Gen. 2, SGMII, TT-Ethernet) + diff --git a/drivers/net/dsa/sja1105/Makefile b/drivers/net/dsa/sja1105/Makefile new file mode 100644 index 000000000000..ed00840802f4 --- /dev/null +++ b/drivers/net/dsa/sja1105/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_NET_DSA_SJA1105) += sja1105.o + +sja1105-objs := \ + sja1105_spi.o \ + sja1105_main.o \ + sja1105_clocking.o \ + sja1105_static_config.o \ + sja1105_dynamic_config.o \ + diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h new file mode 100644 index 000000000000..40d7efe2e01a --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -0,0 +1,139 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean + */ +#ifndef _SJA1105_H +#define _SJA1105_H + +#include +#include +#include "sja1105_static_config.h" + +#define SJA1105_NUM_PORTS 5 +#define SJA1105_NUM_TC 8 +#define SJA1105ET_FDB_BIN_SIZE 4 + +/* Keeps the different addresses between E/T and P/Q/R/S */ +struct sja1105_regs { + u64 device_id; + u64 prod_id; + u64 status; + u64 rgu; + u64 config; + u64 rmii_pll1; + u64 pad_mii_tx[SJA1105_NUM_PORTS]; + u64 cgu_idiv[SJA1105_NUM_PORTS]; + u64 rgmii_pad_mii_tx[SJA1105_NUM_PORTS]; + u64 mii_tx_clk[SJA1105_NUM_PORTS]; + u64 mii_rx_clk[SJA1105_NUM_PORTS]; + u64 mii_ext_tx_clk[SJA1105_NUM_PORTS]; + u64 mii_ext_rx_clk[SJA1105_NUM_PORTS]; + u64 rgmii_tx_clk[SJA1105_NUM_PORTS]; + u64 rmii_ref_clk[SJA1105_NUM_PORTS]; + u64 rmii_ext_tx_clk[SJA1105_NUM_PORTS]; + u64 mac[SJA1105_NUM_PORTS]; + u64 mac_hl1[SJA1105_NUM_PORTS]; + u64 mac_hl2[SJA1105_NUM_PORTS]; + u64 qlevel[SJA1105_NUM_PORTS]; +}; + +struct sja1105_info { + u64 device_id; + /* Needed for distinction between P and R, and between Q and S + * (since the parts with/without SGMII share the same + * switch core and device_id) + */ + u64 part_no; + const struct sja1105_dynamic_table_ops *dyn_ops; + const struct sja1105_table_ops *static_ops; + const struct sja1105_regs *regs; + int (*reset_cmd)(const void *ctx, const void *data); + const char *name; +}; + +struct sja1105_private { + struct sja1105_static_config static_config; + const struct sja1105_info *info; + struct gpio_desc *reset_gpio; + struct spi_device *spidev; + struct dsa_switch *ds; +}; + +#include "sja1105_dynamic_config.h" + +struct sja1105_spi_message { + u64 access; + u64 read_count; + u64 address; +}; + +typedef enum { + SPI_READ = 0, + SPI_WRITE = 1, +} sja1105_spi_rw_mode_t; + +/* From sja1105_spi.c */ +int sja1105_spi_send_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + void *packed_buf, size_t size_bytes); +int sja1105_spi_send_int(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + u64 *value, u64 size_bytes); +int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 base_addr, + void *packed_buf, u64 buf_len); +int sja1105_static_config_upload(struct sja1105_private *priv); + +extern struct sja1105_info sja1105e_info; +extern struct sja1105_info sja1105t_info; +extern struct sja1105_info sja1105p_info; +extern struct sja1105_info sja1105q_info; +extern struct sja1105_info sja1105r_info; +extern struct sja1105_info sja1105s_info; + +/* From sja1105_clocking.c */ + +typedef enum { + XMII_MAC = 0, + XMII_PHY = 1, +} sja1105_mii_role_t; + +typedef enum { + XMII_MODE_MII = 0, + XMII_MODE_RMII = 1, + XMII_MODE_RGMII = 2, +} sja1105_phy_interface_t; + +typedef enum { + SJA1105_SPEED_10MBPS = 3, + SJA1105_SPEED_100MBPS = 2, + SJA1105_SPEED_1000MBPS = 1, + SJA1105_SPEED_AUTO = 0, +} sja1105_speed_t; + +int sja1105_clocking_setup_port(struct sja1105_private *priv, int port); +int sja1105_clocking_setup(struct sja1105_private *priv); + +/* From sja1105_dynamic_config.c */ + +int sja1105_dynamic_config_read(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry); +int sja1105_dynamic_config_write(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry, bool keep); + +/* Common implementations for the static and dynamic configs */ +size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); + +#endif + diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c new file mode 100644 index 000000000000..dd20670fff65 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -0,0 +1,599 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean + */ +#include +#include "sja1105.h" + +#define SJA1105_SIZE_CGU_CMD 4 + +struct sja1105_cfg_pad_mii_tx { + u64 d32_os; + u64 d32_ipud; + u64 d10_os; + u64 d10_ipud; + u64 ctrl_os; + u64 ctrl_ipud; + u64 clk_os; + u64 clk_ih; + u64 clk_ipud; +}; + +/* UM10944 Table 82. + * IDIV_0_C to IDIV_4_C control registers + * (addr. 10000Bh to 10000Fh) + */ +struct sja1105_cgu_idiv { + u64 clksrc; + u64 autoblock; + u64 idiv; + u64 pd; +}; + +/* PLL_1_C control register + * + * SJA1105 E/T: UM10944 Table 81 (address 10000Ah) + * SJA1105 P/Q/R/S: UM11040 Table 116 (address 10000Ah) + */ +struct sja1105_cgu_pll_ctrl { + u64 pllclksrc; + u64 msel; + u64 autoblock; + u64 psel; + u64 direct; + u64 fbsel; + u64 bypass; + u64 pd; +}; + +enum { + CLKSRC_MII0_TX_CLK = 0x00, + CLKSRC_MII0_RX_CLK = 0x01, + CLKSRC_MII1_TX_CLK = 0x02, + CLKSRC_MII1_RX_CLK = 0x03, + CLKSRC_MII2_TX_CLK = 0x04, + CLKSRC_MII2_RX_CLK = 0x05, + CLKSRC_MII3_TX_CLK = 0x06, + CLKSRC_MII3_RX_CLK = 0x07, + CLKSRC_MII4_TX_CLK = 0x08, + CLKSRC_MII4_RX_CLK = 0x09, + CLKSRC_PLL0 = 0x0B, + CLKSRC_PLL1 = 0x0E, + CLKSRC_IDIV0 = 0x11, + CLKSRC_IDIV1 = 0x12, + CLKSRC_IDIV2 = 0x13, + CLKSRC_IDIV3 = 0x14, + CLKSRC_IDIV4 = 0x15, +}; + +/* UM10944 Table 83. + * MIIx clock control registers 1 to 30 + * (addresses 100013h to 100035h) + */ +struct sja1105_cgu_mii_ctrl { + u64 clksrc; + u64 autoblock; + u64 pd; +}; + +static void sja1105_cgu_idiv_packing(void *buf, struct sja1105_cgu_idiv *idiv, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &idiv->clksrc, 28, 24, size, op); + sja1105_packing(buf, &idiv->autoblock, 11, 11, size, op); + sja1105_packing(buf, &idiv->idiv, 5, 2, size, op); + sja1105_packing(buf, &idiv->pd, 0, 0, size, op); +} + +static int sja1105_cgu_idiv_config(struct sja1105_private *priv, int port, + bool enabled, int factor) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + struct sja1105_cgu_idiv idiv; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (enabled && factor != 1 && factor != 10) { + dev_err(dev, "idiv factor must be 1 or 10\n"); + return -ERANGE; + } + + /* Payload for packed_buf */ + idiv.clksrc = 0x0A; /* 25MHz */ + idiv.autoblock = 1; /* Block clk automatically */ + idiv.idiv = factor - 1; /* Divide by 1 or 10 */ + idiv.pd = enabled ? 0 : 1; /* Power down? */ + sja1105_cgu_idiv_packing(packed_buf, &idiv, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->cgu_idiv[port], packed_buf, + SJA1105_SIZE_CGU_CMD); +} + +static void +sja1105_cgu_mii_control_packing(void *buf, struct sja1105_cgu_mii_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->clksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv, + int port, sja1105_mii_role_t role) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_tx_clk; + const int mac_clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + const int phy_clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (role == XMII_MAC) + clksrc = mac_clk_sources[port]; + else + clksrc = phy_clk_sources[port]; + + /* Payload for packed_buf */ + mii_tx_clk.clksrc = clksrc; + mii_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_tx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_tx_clk[port], packed_buf, + SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_rx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_MII0_RX_CLK, + CLKSRC_MII1_RX_CLK, + CLKSRC_MII2_RX_CLK, + CLKSRC_MII3_RX_CLK, + CLKSRC_MII4_RX_CLK, + }; + + /* Payload for packed_buf */ + mii_rx_clk.clksrc = clk_sources[port]; + mii_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_rx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_rx_clk[port], packed_buf, + SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + /* Payload for packed_buf */ + mii_ext_tx_clk.clksrc = clk_sources[port]; + mii_ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_tx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_rx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + /* Payload for packed_buf */ + mii_ext_rx_clk.clksrc = clk_sources[port]; + mii_ext_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_rx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_ext_rx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_mii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + int rc; + + dev_dbg(dev, "Configuring MII-%s clocking\n", + (role == XMII_MAC) ? "MAC" : "PHY"); + /* If role is MAC, disable IDIV + * If role is PHY, enable IDIV and configure for 1/1 divider + */ + rc = sja1105_cgu_idiv_config(priv, port, (role == XMII_PHY), 1); + if (rc < 0) + return rc; + + /* Configure CLKSRC of MII_TX_CLK_n + * * If role is MAC, select TX_CLK_n + * * If role is PHY, select IDIV_n + */ + rc = sja1105_cgu_mii_tx_clk_config(priv, port, role); + if (rc < 0) + return rc; + + /* Configure CLKSRC of MII_RX_CLK_n + * Select RX_CLK_n + */ + rc = sja1105_cgu_mii_rx_clk_config(priv, port); + if (rc < 0) + return rc; + + if (role == XMII_PHY) { + /* Per MII spec, the PHY (which is us) drives the TX_CLK pin */ + + /* Configure CLKSRC of EXT_TX_CLK_n + * Select IDIV_n + */ + rc = sja1105_cgu_mii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + + /* Configure CLKSRC of EXT_RX_CLK_n + * Select IDIV_n + */ + rc = sja1105_cgu_mii_ext_rx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +static void +sja1105_cgu_pll_control_packing(void *buf, struct sja1105_cgu_pll_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->pllclksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->msel, 23, 16, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->psel, 9, 8, size, op); + sja1105_packing(buf, &cmd->direct, 7, 7, size, op); + sja1105_packing(buf, &cmd->fbsel, 6, 6, size, op); + sja1105_packing(buf, &cmd->bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv, + int port, sja1105_speed_t speed) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl txc; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (speed == SJA1105_SPEED_1000MBPS) { + clksrc = CLKSRC_PLL0; + } else { + int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, + CLKSRC_IDIV3, CLKSRC_IDIV4}; + clksrc = clk_sources[port]; + } + + /* RGMII: 125MHz for 1000, 25MHz for 100, 2.5MHz for 10 */ + txc.clksrc = clksrc; + /* Autoblock clk while changing clksrc */ + txc.autoblock = 1; + /* Power Down off => enabled */ + txc.pd = 0; + sja1105_cgu_mii_control_packing(packed_buf, &txc, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rgmii_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +/* AGU */ +static void +sja1105_cfg_pad_mii_tx_packing(void *buf, struct sja1105_cfg_pad_mii_tx *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->d32_os, 28, 27, size, op); + sja1105_packing(buf, &cmd->d32_ipud, 25, 24, size, op); + sja1105_packing(buf, &cmd->d10_os, 20, 19, size, op); + sja1105_packing(buf, &cmd->d10_ipud, 17, 16, size, op); + sja1105_packing(buf, &cmd->ctrl_os, 12, 11, size, op); + sja1105_packing(buf, &cmd->ctrl_ipud, 9, 8, size, op); + sja1105_packing(buf, &cmd->clk_os, 4, 3, size, op); + sja1105_packing(buf, &cmd->clk_ih, 2, 2, size, op); + sja1105_packing(buf, &cmd->clk_ipud, 1, 0, size, op); +} + +static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii_tx pad_mii_tx; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + /* Payload */ + pad_mii_tx.d32_os = 3; /* TXD[3:2] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d10_os = 3; /* TXD[1:0] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d32_ipud = 2; /* TXD[3:2] input stage: */ + /* plain input (default) */ + pad_mii_tx.d10_ipud = 2; /* TXD[1:0] input stage: */ + /* plain input (default) */ + pad_mii_tx.ctrl_os = 3; /* TX_CTL / TX_ER output stage */ + pad_mii_tx.ctrl_ipud = 2; /* TX_CTL / TX_ER input stage (default) */ + pad_mii_tx.clk_os = 3; /* TX_CLK output stage */ + pad_mii_tx.clk_ih = 0; /* TX_CLK input hysteresis (default) */ + pad_mii_tx.clk_ipud = 2; /* TX_CLK input stage (default) */ + sja1105_cfg_pad_mii_tx_packing(packed_buf, &pad_mii_tx, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rgmii_pad_mii_tx[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port) +{ + struct device *dev = priv->ds->dev; + struct sja1105_mac_config_entry *mac; + sja1105_speed_t speed; + int rc; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + speed = mac[port].speed; + + dev_dbg(dev, "Configuring port %d RGMII at speed %dMbps\n", + port, speed); + + switch (speed) { + case SJA1105_SPEED_1000MBPS: + /* 1000Mbps, IDIV disabled (125 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + break; + case SJA1105_SPEED_100MBPS: + /* 100Mbps, IDIV enabled, divide by 1 (25 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 1); + break; + case SJA1105_SPEED_10MBPS: + /* 10Mbps, IDIV enabled, divide by 10 (2.5 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 10); + break; + case SJA1105_SPEED_AUTO: + /* Skip CGU configuration if there is no speed available + * (e.g. link is not established yet) + */ + dev_dbg(dev, "Speed not available, skipping CGU config\n"); + return 0; + default: + rc = -EINVAL; + } + + if (rc < 0) { + dev_err(dev, "Failed to configure idiv\n"); + return rc; + } + rc = sja1105_cgu_rgmii_tx_clk_config(priv, port, speed); + if (rc < 0) { + dev_err(dev, "Failed to configure RGMII Tx clock\n"); + return rc; + } + rc = sja1105_rgmii_cfg_pad_tx_config(priv, port); + if (rc < 0) { + dev_err(dev, "Failed to configure Tx pad registers\n"); + return rc; + } + return 0; +} + +static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl ref_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + + /* Payload for packed_buf */ + ref_clk.clksrc = clk_sources[port]; + ref_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ref_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ref_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rmii_ref_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_rmii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + /* Payload for packed_buf */ + ext_tx_clk.clksrc = CLKSRC_PLL1; + ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ext_tx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rmii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_cgu_rmii_pll_config(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1105_cgu_pll_ctrl pll = {0}; + struct device *dev = priv->ds->dev; + int rc; + + /* PLL1 must be enabled and output 50 Mhz. + * This is done by writing first 0x0A010941 to + * the PLL_1_C register and then deasserting + * power down (PD) 0x0A010940. + */ + + /* Step 1: PLL1 setup for 50Mhz */ + pll.pllclksrc = 0xA; + pll.msel = 0x1; + pll.autoblock = 0x1; + pll.psel = 0x1; + pll.direct = 0x0; + pll.fbsel = 0x1; + pll.bypass = 0x0; + pll.pd = 0x1; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rmii_pll1, + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc < 0) { + dev_err(dev, "failed to configure PLL1 for 50MHz\n"); + return rc; + } + + /* Step 2: Enable PLL1 */ + pll.pd = 0x0; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rmii_pll1, + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc < 0) { + dev_err(dev, "failed to enable PLL1\n"); + return rc; + } + return rc; +} + +static int sja1105_rmii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + int rc; + + dev_dbg(dev, "Configuring RMII-%s clocking\n", + (role == XMII_MAC) ? "MAC" : "PHY"); + /* AH1601.pdf chapter 2.5.1. Sources */ + if (role == XMII_MAC) { + /* Configure and enable PLL1 for 50Mhz output */ + rc = sja1105_cgu_rmii_pll_config(priv); + if (rc < 0) + return rc; + } + /* Disable IDIV for this port */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + if (rc < 0) + return rc; + /* Source to sink mappings */ + rc = sja1105_cgu_rmii_ref_clk_config(priv, port); + if (rc < 0) + return rc; + if (role == XMII_MAC) { + rc = sja1105_cgu_rmii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +int sja1105_clocking_setup_port(struct sja1105_private *priv, int port) +{ + struct sja1105_xmii_params_entry *mii; + struct device *dev = priv->ds->dev; + sja1105_phy_interface_t phy_mode; + sja1105_mii_role_t role; + int rc; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + + /* RGMII etc */ + phy_mode = mii->xmii_mode[port]; + /* MAC or PHY, for applicable types (not RGMII) */ + role = mii->phy_mac[port]; + + switch (phy_mode) { + case XMII_MODE_MII: + rc = sja1105_mii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RMII: + rc = sja1105_rmii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RGMII: + rc = sja1105_rgmii_clocking_setup(priv, port); + break; + default: + dev_err(dev, "Invalid interface mode specified: %d\n", + phy_mode); + return -EINVAL; + } + if (rc) + dev_err(dev, "Clocking setup for port %d failed: %d\n", + port, rc); + return rc; +} + +int sja1105_clocking_setup(struct sja1105_private *priv) +{ + int port, rc; + + for (port = 0; port < SJA1105_NUM_PORTS; port++) { + rc = sja1105_clocking_setup_port(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c new file mode 100644 index 000000000000..d8f145488063 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c @@ -0,0 +1,489 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018-2019, Vladimir Oltean + */ +#include "sja1105.h" + +#define SJA1105_SIZE_DYN_CMD 4 + +#define SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_L2_LOOKUP_ENTRY) + +#define SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY) + +#define SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + 4 + SJA1105_SIZE_VLAN_LOOKUP_ENTRY) + +#define SJA1105_SIZE_L2_FORWARDING_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_L2_FORWARDING_ENTRY) + +#define SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY) + +#define SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY) + +#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105_MAX_DYN_CMD_SIZE \ + SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD + +static void +sja1105pqrs_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - The hardware takes the 'index' field within + * struct sja1105_l2_lookup_entry as the index on which this command + * will operate. However it will ignore everything else, so 'index' + * is logically part of command but physically part of entry. + * Populate the 'index' entry field from within the command callback, + * such that our API doesn't need to ask for a full-blown entry + * structure when e.g. a delete is requested. + */ + sja1105_packing(buf, &cmd->index, 29, 20, + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, op); + /* TODO hostcmd */ +} + +static void +sja1105et_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - see comments above. */ + sja1105_packing(buf, &cmd->index, 29, 20, + SJA1105ET_SIZE_L2_LOOKUP_ENTRY, op); +} + +static void +sja1105et_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + u64 mgmtroute = 1; + + sja1105et_l2_lookup_cmd_packing(buf, cmd, op); + if (op == PACK) + sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD); +} + +static size_t sja1105et_mgmt_route_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_mgmt_entry *entry = entry_ptr; + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + + /* UM10944: To specify if a PTP egress timestamp shall be captured on + * each port upon transmission of the frame, the LSB of VLANID in the + * ENTRY field provided by the host must be set. + * Bit 1 of VLANID then specifies the register where the timestamp for + * this port is stored in. + */ + sja1105_packing(buf, &entry->tsreg, 85, 85, size, op); + sja1105_packing(buf, &entry->takets, 84, 84, size, op); + sja1105_packing(buf, &entry->macaddr, 83, 36, size, op); + sja1105_packing(buf, &entry->destports, 35, 31, size, op); + sja1105_packing(buf, &entry->enfport, 30, 30, size, op); + return size; +} + +/* In E/T, entry is at addresses 0x27-0x28. There is a 4 byte gap at 0x29, + * and command is at 0x2a. Similarly in P/Q/R/S there is a 1 register gap + * between entry (0x2d, 0x2e) and command (0x30). + */ +static void +sja1105_vlan_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_VLAN_LOOKUP_ENTRY + 4; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - see comments above, applied for 'vlanid' field of + * struct sja1105_vlan_lookup_entry. + */ + sja1105_packing(buf, &cmd->index, 38, 27, + SJA1105_SIZE_VLAN_LOOKUP_ENTRY, op); +} + +static void +sja1105_l2_forwarding_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_L2_FORWARDING_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 4, 0, size, op); +} + +static void +sja1105et_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_DYN_CMD; + /* Yup, user manual definitions are reversed */ + u8 *reg1 = buf + 4; + + sja1105_packing(reg1, &cmd->valid, 31, 31, size, op); + sja1105_packing(reg1, &cmd->index, 26, 24, size, op); +} + +static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + /* Yup, user manual definitions are reversed */ + u8 *reg1 = buf + 4; + u8 *reg2 = buf; + + sja1105_packing(reg1, &entry->speed, 30, 29, size, op); + sja1105_packing(reg1, &entry->drpdtag, 23, 23, size, op); + sja1105_packing(reg1, &entry->drpuntag, 22, 22, size, op); + sja1105_packing(reg1, &entry->retag, 21, 21, size, op); + sja1105_packing(reg1, &entry->dyn_learn, 20, 20, size, op); + sja1105_packing(reg1, &entry->egress, 19, 19, size, op); + sja1105_packing(reg1, &entry->ingress, 18, 18, size, op); + sja1105_packing(reg1, &entry->ing_mirr, 17, 17, size, op); + sja1105_packing(reg1, &entry->egr_mirr, 16, 16, size, op); + sja1105_packing(reg1, &entry->vlanprio, 14, 12, size, op); + sja1105_packing(reg1, &entry->vlanid, 11, 0, size, op); + sja1105_packing(reg2, &entry->tp_delin, 31, 16, size, op); + sja1105_packing(reg2, &entry->tp_delout, 15, 0, size, op); + /* MAC configuration table entries which can't be reconfigured: + * top, base, enabled, ifg, maxage, drpnona664 + */ + /* Bogus return value, not used anywhere */ + return 0; +} + +static void +sja1105pqrs_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; + u8 *p = buf + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 2, 0, size, op); +} + +static void +sja1105et_l2_lookup_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + sja1105_packing(buf, &cmd->valid, 31, 31, + SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); +} + +static size_t +sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->poly, 7, 0, + SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); + /* Bogus return value, not used anywhere */ + return 0; +} + +static void +sja1105et_general_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; + + sja1105_packing(buf, &cmd->valid, 31, 31, size, op); + sja1105_packing(buf, &cmd->errors, 30, 30, size, op); +} + +static size_t +sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_general_params_entry *entry = entry_ptr; + const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; + + sja1105_packing(buf, &entry->mirr_port, 2, 0, size, op); + /* Bogus return value, not used anywhere */ + return 0; +} + +#define OP_READ BIT(0) +#define OP_WRITE BIT(1) +#define OP_DEL BIT(2) + +/* SJA1105E/T: First generation */ +struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = { + [BLK_IDX_L2_LOOKUP] = { + .entry_packing = sja1105et_l2_lookup_entry_packing, + .cmd_packing = sja1105et_l2_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x20, + }, + [BLK_IDX_MGMT_ROUTE] = { + .entry_packing = sja1105et_mgmt_route_entry_packing, + .cmd_packing = sja1105et_mgmt_route_cmd_packing, + .access = (OP_READ | OP_WRITE), + .max_entry_count = SJA1105_NUM_PORTS, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x20, + }, + [BLK_IDX_L2_POLICING] = {0}, + [BLK_IDX_VLAN_LOOKUP] = { + .entry_packing = sja1105_vlan_lookup_entry_packing, + .cmd_packing = sja1105_vlan_lookup_cmd_packing, + .access = (OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, + .addr = 0x27, + }, + [BLK_IDX_L2_FORWARDING] = { + .entry_packing = sja1105_l2_forwarding_entry_packing, + .cmd_packing = sja1105_l2_forwarding_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_MAC_CONFIG] = { + .entry_packing = sja1105et_mac_config_entry_packing, + .cmd_packing = sja1105et_mac_config_cmd_packing, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD, + .addr = 0x36, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .entry_packing = sja1105et_l2_lookup_params_entry_packing, + .cmd_packing = sja1105et_l2_lookup_params_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, + .addr = 0x38, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = {0}, + [BLK_IDX_GENERAL_PARAMS] = { + .entry_packing = sja1105et_general_params_entry_packing, + .cmd_packing = sja1105et_general_params_cmd_packing, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD, + .addr = 0x34, + }, + [BLK_IDX_XMII_PARAMS] = {0}, +}; + +/* SJA1105P/Q/R/S: Second generation: TODO */ +struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = { + [BLK_IDX_L2_LOOKUP] = { + .entry_packing = sja1105pqrs_l2_lookup_entry_packing, + .cmd_packing = sja1105pqrs_l2_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_L2_POLICING] = {0}, + [BLK_IDX_VLAN_LOOKUP] = { + .entry_packing = sja1105_vlan_lookup_entry_packing, + .cmd_packing = sja1105_vlan_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, + .addr = 0x2D, + }, + [BLK_IDX_L2_FORWARDING] = { + .entry_packing = sja1105_l2_forwarding_entry_packing, + .cmd_packing = sja1105_l2_forwarding_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, + .addr = 0x2A, + }, + [BLK_IDX_MAC_CONFIG] = { + .entry_packing = sja1105pqrs_mac_config_entry_packing, + .cmd_packing = sja1105pqrs_mac_config_cmd_packing, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD, + .addr = 0x4B, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .entry_packing = sja1105et_l2_lookup_params_entry_packing, + .cmd_packing = sja1105et_l2_lookup_params_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, + .addr = 0x38, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = {0}, + [BLK_IDX_GENERAL_PARAMS] = { + .entry_packing = sja1105et_general_params_entry_packing, + .cmd_packing = sja1105et_general_params_cmd_packing, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD, + .addr = 0x34, + }, + [BLK_IDX_XMII_PARAMS] = {0}, +}; + +int sja1105_dynamic_config_read(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry) +{ + const struct sja1105_dynamic_table_ops *ops; + struct sja1105_dyn_cmd cmd = {0}; + /* SPI payload buffer */ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; + int retries = 3; + int rc; + + if (blk_idx >= BLK_IDX_MAX_DYN) + return -ERANGE; + + ops = &priv->info->dyn_ops[blk_idx]; + + if (index >= ops->max_entry_count) + return -ERANGE; + if (!(ops->access & OP_READ)) + return -EOPNOTSUPP; + if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) + return -ERANGE; + if (!ops->cmd_packing) + return -EOPNOTSUPP; + if (!ops->entry_packing) + return -EOPNOTSUPP; + + cmd.valid = true; /* Trigger action on table entry */ + cmd.rdwrset = SPI_READ; /* Action is read */ + cmd.index = index; + ops->cmd_packing(packed_buf, &cmd, PACK); + + /* Send SPI write operation: read config table entry */ + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr, + packed_buf, ops->packed_size); + if (rc < 0) + return rc; + + /* Loop until we have confirmation that hardware has finished + * processing the command and has cleared the VALID field + */ + do { + memset(packed_buf, 0, ops->packed_size); + + /* Retrieve the read operation's result */ + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, ops->addr, + packed_buf, ops->packed_size); + if (rc < 0) + return rc; + + cmd = (struct sja1105_dyn_cmd) {0}; + ops->cmd_packing(packed_buf, &cmd, UNPACK); + /* UM10944: [valident] will always be found cleared + * during a read access with MGMTROUTE set. + * So don't error out in that case. + */ + if (!cmd.valident && blk_idx != BLK_IDX_MGMT_ROUTE) + return -EINVAL; + cpu_relax(); + } while (cmd.valid && --retries); + + if (cmd.valid) + return -ETIMEDOUT; + + /* Don't dereference possibly NULL pointer - maybe caller + * only wanted to see whether the entry existed or not. + */ + if (entry) + ops->entry_packing(packed_buf, entry, UNPACK); + return 0; +} + +int sja1105_dynamic_config_write(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry, bool keep) +{ + const struct sja1105_dynamic_table_ops *ops; + struct sja1105_dyn_cmd cmd = {0}; + /* SPI payload buffer */ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; + int rc; + + if (blk_idx >= BLK_IDX_MAX_DYN) + return -ERANGE; + + ops = &priv->info->dyn_ops[blk_idx]; + + if (index >= ops->max_entry_count) + return -ERANGE; + if (!(ops->access & OP_WRITE)) + return -EOPNOTSUPP; + if (!keep && !(ops->access & OP_DEL)) + return -EOPNOTSUPP; + if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) + return -ERANGE; + + cmd.valident = keep; /* If false, deletes entry */ + cmd.valid = true; /* Trigger action on table entry */ + cmd.rdwrset = SPI_WRITE; /* Action is write */ + cmd.index = index; + + if (!ops->cmd_packing) + return -EOPNOTSUPP; + ops->cmd_packing(packed_buf, &cmd, PACK); + + if (!ops->entry_packing) + return -EOPNOTSUPP; + /* Don't dereference potentially NULL pointer if just + * deleting a table entry is what was requested. For cases + * where 'index' field is physically part of entry structure, + * and needed here, we deal with that in the cmd_packing callback. + */ + if (keep) + ops->entry_packing(packed_buf, entry, PACK); + + /* Send SPI write operation: read config table entry */ + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr, + packed_buf, ops->packed_size); + if (rc < 0) + return rc; + + cmd = (struct sja1105_dyn_cmd) {0}; + ops->cmd_packing(packed_buf, &cmd, UNPACK); + if (cmd.errors) + return -EINVAL; + + return 0; +} diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.h b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h new file mode 100644 index 000000000000..77be59546a55 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2019, Vladimir Oltean + */ +#ifndef _SJA1105_DYNAMIC_CONFIG_H +#define _SJA1105_DYNAMIC_CONFIG_H + +#include "sja1105.h" +#include + +struct sja1105_dyn_cmd { + u64 valid; + u64 rdwrset; + u64 errors; + u64 valident; + u64 index; +}; + +struct sja1105_dynamic_table_ops { + /* This returns size_t just to keep same prototype as the + * static config ops, of which we are reusing some functions. + */ + size_t (*entry_packing)(void *buf, void *entry_ptr, enum packing_op op); + void (*cmd_packing)(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op); + size_t max_entry_count; + size_t packed_size; + u64 addr; + u8 access; +}; + +struct sja1105_mgmt_entry { + u64 tsreg; + u64 takets; + u64 macaddr; + u64 destports; + u64 enfport; + u64 index; +}; + +extern struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN]; +extern struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN]; + +#endif diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c new file mode 100644 index 000000000000..7d2ad2db0d88 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -0,0 +1,928 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sja1105.h" + +static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len, + unsigned int startup_delay) +{ + gpiod_set_value_cansleep(gpio, 1); + /* Wait for minimum reset pulse length */ + msleep(pulse_len); + gpiod_set_value_cansleep(gpio, 0); + /* Wait until chip is ready after reset */ + msleep(startup_delay); +} + +static void +sja1105_port_allow_traffic(struct sja1105_l2_forwarding_entry *l2_fwd, + int from, int to, bool allow) +{ + if (allow) { + l2_fwd[from].bc_domain |= BIT(to); + l2_fwd[from].reach_port |= BIT(to); + l2_fwd[from].fl_domain |= BIT(to); + } else { + l2_fwd[from].bc_domain &= ~BIT(to); + l2_fwd[from].reach_port &= ~BIT(to); + l2_fwd[from].fl_domain &= ~BIT(to); + } +} + +/* Structure used to temporarily transport device tree + * settings into sja1105_setup + */ +struct sja1105_dt_port { + phy_interface_t phy_mode; + sja1105_mii_role_t role; +}; + +static int sja1105_init_mac_settings(struct sja1105_private *priv) +{ + struct sja1105_mac_config_entry default_mac = { + /* Enable all 8 priority queues on egress. + * Every queue i holds top[i] - base[i] frames. + * Sum of top[i] - base[i] is 511 (max hardware limit). + */ + .top = {0x3F, 0x7F, 0xBF, 0xFF, 0x13F, 0x17F, 0x1BF, 0x1FF}, + .base = {0x0, 0x40, 0x80, 0xC0, 0x100, 0x140, 0x180, 0x1C0}, + .enabled = {true, true, true, true, true, true, true, true}, + /* Keep standard IFG of 12 bytes on egress. */ + .ifg = 0, + /* Always put the MAC speed in automatic mode, where it can be + * retrieved from the PHY object through phylib and + * sja1105_adjust_port_config. + */ + .speed = SJA1105_SPEED_AUTO, + /* No static correction for 1-step 1588 events */ + .tp_delin = 0, + .tp_delout = 0, + /* Disable aging for critical TTEthernet traffic */ + .maxage = 0xFF, + /* Internal VLAN (pvid) to apply to untagged ingress */ + .vlanprio = 0, + .vlanid = 0, + .ing_mirr = false, + .egr_mirr = false, + /* Don't drop traffic with other EtherType than ETH_P_IP */ + .drpnona664 = false, + /* Don't drop double-tagged traffic */ + .drpdtag = false, + /* Don't drop untagged traffic */ + .drpuntag = false, + /* Don't retag 802.1p (VID 0) traffic with the pvid */ + .retag = false, + /* Enable learning and I/O on user ports by default. */ + .dyn_learn = true, + .egress = false, + .ingress = false, + }; + struct sja1105_mac_config_entry *mac; + struct sja1105_table *table; + int i; + + table = &priv->static_config.tables[BLK_IDX_MAC_CONFIG]; + + /* Discard previous MAC Configuration Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_NUM_PORTS, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + /* Override table based on phylib DT bindings */ + table->entry_count = SJA1105_NUM_PORTS; + + mac = table->entries; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) + mac[i] = default_mac; + + return 0; +} + +static int sja1105_init_mii_settings(struct sja1105_private *priv, + struct sja1105_dt_port *ports) +{ + struct device *dev = &priv->spidev->dev; + struct sja1105_xmii_params_entry *mii; + struct sja1105_table *table; + int i; + + table = &priv->static_config.tables[BLK_IDX_XMII_PARAMS]; + + /* Discard previous xMII Mode Parameters Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_XMII_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + /* Override table based on phylib DT bindings */ + table->entry_count = SJA1105_MAX_XMII_PARAMS_COUNT; + + mii = table->entries; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + switch (ports[i].phy_mode) { + case PHY_INTERFACE_MODE_MII: + mii->xmii_mode[i] = XMII_MODE_MII; + break; + case PHY_INTERFACE_MODE_RMII: + mii->xmii_mode[i] = XMII_MODE_RMII; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + mii->xmii_mode[i] = XMII_MODE_RGMII; + break; + default: + dev_err(dev, "Unsupported PHY mode %s!\n", + phy_modes(ports[i].phy_mode)); + } + + mii->phy_mac[i] = ports[i].role; + } + return 0; +} + +static int sja1105_init_static_fdb(struct sja1105_private *priv) +{ + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + return 0; +} + +static int sja1105_init_l2_lookup_params(struct sja1105_private *priv) +{ + struct sja1105_table *table; + struct sja1105_l2_lookup_params_entry default_l2_lookup_params = { + /* TODO Learned FDB entries are never forgotten */ + .maxage = 0, + /* All entries within a FDB bin are available for learning */ + .dyn_tbsz = SJA1105ET_FDB_BIN_SIZE, + /* 2^8 + 2^5 + 2^3 + 2^2 + 2^1 + 1 in Koopman notation */ + .poly = 0x97, + /* This selects between Independent VLAN Learning (IVL) and + * Shared VLAN Learning (SVL) + */ + .shared_learn = false, + /* Don't discard management traffic based on ENFPORT - + * we don't perform SMAC port enforcement anyway, so + * what we are setting here doesn't matter. + */ + .no_enf_hostprt = false, + /* Don't learn SMAC for mac_fltres1 and mac_fltres0. + * Maybe correlate with no_linklocal_learn from bridge driver? + */ + .no_mgmt_learn = true, + }; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_l2_lookup_params_entry *)table->entries)[0] = + default_l2_lookup_params; + + return 0; +} + +static int sja1105_init_static_vlan(struct sja1105_private *priv) +{ + struct sja1105_table *table; + struct sja1105_vlan_lookup_entry pvid = { + .ving_mirr = 0, + .vegr_mirr = 0, + .vmemb_port = 0, + .vlan_bc = 0, + .tag_port = 0, + .vlanid = 0, + }; + int i; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + /* The static VLAN table will only contain the initial pvid of 0. + */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(1, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = 1; + + /* VLAN ID 0: all DT-defined ports are members; no restrictions on + * forwarding; always transmit priority-tagged frames as untagged. + */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + pvid.vmemb_port |= BIT(i); + pvid.vlan_bc |= BIT(i); + pvid.tag_port &= ~BIT(i); + } + + ((struct sja1105_vlan_lookup_entry *)table->entries)[0] = pvid; + return 0; +} + +static int sja1105_init_l2_forwarding(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_entry *l2fwd; + struct sja1105_table *table; + int i, j; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_FORWARDING_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_FORWARDING_COUNT; + + l2fwd = table->entries; + + /* First 5 entries define the forwarding rules */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + unsigned int upstream = dsa_upstream_port(priv->ds, i); + + for (j = 0; j < SJA1105_NUM_TC; j++) + l2fwd[i].vlan_pmap[j] = j; + + if (i == upstream) + continue; + + sja1105_port_allow_traffic(l2fwd, i, upstream, true); + sja1105_port_allow_traffic(l2fwd, upstream, i, true); + } + /* Next 8 entries define VLAN PCP mapping from ingress to egress. + * Create a one-to-one mapping. + */ + for (i = 0; i < SJA1105_NUM_TC; i++) + for (j = 0; j < SJA1105_NUM_PORTS; j++) + l2fwd[SJA1105_NUM_PORTS + i].vlan_pmap[j] = i; + + return 0; +} + +static int sja1105_init_l2_forwarding_params(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_params_entry default_l2fwd_params = { + /* Disallow dynamic reconfiguration of vlan_pmap */ + .max_dynp = 0, + /* Use a single memory partition for all ingress queues */ + .part_spc = { SJA1105_MAX_FRAME_MEMORY, 0, 0, 0, 0, 0, 0, 0 }, + }; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_l2_forwarding_params_entry *)table->entries)[0] = + default_l2fwd_params; + + return 0; +} + +static int sja1105_init_general_params(struct sja1105_private *priv) +{ + struct sja1105_general_params_entry default_general_params = { + /* Disallow dynamic changing of the mirror port */ + .mirr_ptacu = 0, + .switchid = priv->ds->index, + /* Priority queue for link-local frames trapped to CPU */ + .hostprio = 0, + .mac_fltres1 = SJA1105_LINKLOCAL_FILTER_A, + .mac_flt1 = SJA1105_LINKLOCAL_FILTER_A_MASK, + .incl_srcpt1 = true, + .send_meta1 = false, + .mac_fltres0 = SJA1105_LINKLOCAL_FILTER_B, + .mac_flt0 = SJA1105_LINKLOCAL_FILTER_B_MASK, + .incl_srcpt0 = true, + .send_meta0 = false, + /* The destination for traffic matching mac_fltres1 and + * mac_fltres0 on all ports except host_port. Such traffic + * receieved on host_port itself would be dropped, except + * by installing a temporary 'management route' + */ + .host_port = dsa_upstream_port(priv->ds, 0), + /* Same as host port */ + .mirr_port = dsa_upstream_port(priv->ds, 0), + /* Link-local traffic received on casc_port will be forwarded + * to host_port without embedding the source port and device ID + * info in the destination MAC address (presumably because it + * is a cascaded port and a downstream SJA switch already did + * that). Default to an invalid port (to disable the feature) + * and overwrite this if we find any DSA (cascaded) ports. + */ + .casc_port = SJA1105_NUM_PORTS, + /* No TTEthernet */ + .vllupformat = 0, + .vlmarker = 0, + .vlmask = 0, + /* Only update correctionField for 1-step PTP (L2 transport) */ + .ignore2stf = 0, + .tpid = ETH_P_8021Q, + .tpid2 = ETH_P_8021Q, + }; + struct sja1105_table *table; + int i; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) + if (dsa_is_dsa_port(priv->ds, i)) + default_general_params.casc_port = i; + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_GENERAL_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_general_params_entry *)table->entries)[0] = + default_general_params; + + return 0; +} + +#define SJA1105_RATE_MBPS(speed) (((speed) * 64000) / 1000) + +static inline void +sja1105_setup_policer(struct sja1105_l2_policing_entry *policing, + int index) +{ + policing[index].sharindx = index; + policing[index].smax = 65535; /* Burst size in bytes */ + policing[index].rate = SJA1105_RATE_MBPS(1000); + policing[index].maxlen = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; + policing[index].partition = 0; +} + +static int sja1105_init_l2_policing(struct sja1105_private *priv) +{ + struct sja1105_l2_policing_entry *policing; + struct sja1105_table *table; + int i, j, k; + + table = &priv->static_config.tables[BLK_IDX_L2_POLICING]; + + /* Discard previous L2 Policing Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_POLICING_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_POLICING_COUNT; + + policing = table->entries; + + /* k sweeps through all unicast policers (0-39). + * bcast sweeps through policers 40-44. + */ + for (i = 0, k = 0; i < SJA1105_NUM_PORTS; i++) { + int bcast = (SJA1105_NUM_PORTS * SJA1105_NUM_TC) + i; + + for (j = 0; j < SJA1105_NUM_TC; j++, k++) + sja1105_setup_policer(policing, k); + + /* Set up this port's policer for broadcast traffic */ + sja1105_setup_policer(policing, bcast); + } + return 0; +} + +static int sja1105_static_config_load(struct sja1105_private *priv, + struct sja1105_dt_port *ports) +{ + int rc; + + sja1105_static_config_free(&priv->static_config); + rc = sja1105_static_config_init(&priv->static_config, + priv->info->static_ops, + priv->info->device_id); + if (rc) + return rc; + + /* Build static configuration */ + rc = sja1105_init_mac_settings(priv); + if (rc < 0) + return rc; + rc = sja1105_init_mii_settings(priv, ports); + if (rc < 0) + return rc; + rc = sja1105_init_static_fdb(priv); + if (rc < 0) + return rc; + rc = sja1105_init_static_vlan(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_lookup_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_policing(priv); + if (rc < 0) + return rc; + rc = sja1105_init_general_params(priv); + if (rc < 0) + return rc; + + /* Send initial configuration to hardware via SPI */ + return sja1105_static_config_upload(priv); +} + +static int sja1105_parse_ports_node(struct sja1105_private *priv, + struct sja1105_dt_port *ports, + struct device_node *ports_node) +{ + struct device *dev = &priv->spidev->dev; + struct device_node *child; + + for_each_child_of_node(ports_node, child) { + struct device_node *phy_node; + int phy_mode; + u32 index; + + /* Get switch port number from DT */ + if (of_property_read_u32(child, "reg", &index) < 0) { + dev_err(dev, "Port number not defined in device tree " + "(property \"reg\")\n"); + return -ENODEV; + } + + /* Get PHY mode from DT */ + phy_mode = of_get_phy_mode(child); + if (phy_mode < 0) { + dev_err(dev, "Failed to read phy-mode or " + "phy-interface-type property for port %d\n", + index); + return -ENODEV; + } + ports[index].phy_mode = phy_mode; + + phy_node = of_parse_phandle(child, "phy-handle", 0); + if (!phy_node) { + if (!of_phy_is_fixed_link(child)) { + dev_err(dev, "phy-handle or fixed-link " + "properties missing!\n"); + return -ENODEV; + } + /* phy-handle is missing, but fixed-link isn't. + * So it's a fixed link. Default to PHY role. + */ + ports[index].role = XMII_PHY; + } else { + /* phy-handle present => put port in MAC role */ + ports[index].role = XMII_MAC; + of_node_put(phy_node); + } + + /* The MAC/PHY role can be overridden with explicit bindings */ + if (of_property_read_bool(child, "sja1105,role-mac")) + ports[index].role = XMII_MAC; + else if (of_property_read_bool(child, "sja1105,role-phy")) + ports[index].role = XMII_PHY; + } + + return 0; +} + +static int sja1105_parse_dt(struct sja1105_private *priv, + struct sja1105_dt_port *ports) +{ + struct device *dev = &priv->spidev->dev; + struct device_node *switch_node = dev->of_node; + struct device_node *ports_node; + int rc; + + ports_node = of_get_child_by_name(switch_node, "ports"); + if (!ports_node) { + dev_err(dev, "Incorrect bindings: absent \"ports\" node\n"); + return -ENODEV; + } + + rc = sja1105_parse_ports_node(priv, ports, ports_node); + of_node_put(ports_node); + + return rc; +} + +/* Convert back and forth MAC speed from Mbps to SJA1105 encoding */ +static int sja1105_speed[] = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 10, + [SJA1105_SPEED_100MBPS] = 100, + [SJA1105_SPEED_1000MBPS] = 1000, +}; + +static sja1105_speed_t sja1105_get_speed_cfg(unsigned int speed_mbps) +{ + int i; + + for (i = SJA1105_SPEED_AUTO; i <= SJA1105_SPEED_1000MBPS; i++) + if (sja1105_speed[i] == speed_mbps) + return i; + return -EINVAL; +} + +/* Set link speed and enable/disable traffic I/O in the MAC configuration + * for a specific port. + * + * @speed_mbps: If 0, leave the speed unchanged, else adapt MAC to PHY speed. + * @enabled: Manage Rx and Tx settings for this port. Overrides the static + * configuration settings. + */ +static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, + int speed_mbps, bool enabled) +{ + struct sja1105_xmii_params_entry *mii; + struct sja1105_mac_config_entry *mac; + struct device *dev = priv->ds->dev; + sja1105_phy_interface_t phy_mode; + sja1105_speed_t speed; + int rc; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + speed = sja1105_get_speed_cfg(speed_mbps); + if (speed_mbps && speed < 0) { + dev_err(dev, "Invalid speed %iMbps\n", speed_mbps); + return -EINVAL; + } + + /* If requested, overwrite SJA1105_SPEED_AUTO from the static MAC + * configuration table, since this will be used for the clocking setup, + * and we no longer need to store it in the static config (already told + * hardware we want auto during upload phase). + */ + if (speed_mbps) + mac[port].speed = speed; + else + mac[port].speed = SJA1105_SPEED_AUTO; + + /* On P/Q/R/S, one can read from the device via the MAC reconfiguration + * tables. On E/T, MAC reconfig tables are not readable, only writable. + * We have to *know* what the MAC looks like. For the sake of keeping + * the code common, we'll use the static configuration tables as a + * reasonable approximation for both E/T and P/Q/R/S. + */ + mac[port].ingress = enabled; + mac[port].egress = enabled; + + /* Write to the dynamic reconfiguration tables */ + rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, + port, &mac[port], true); + if (rc < 0) { + dev_err(dev, "Failed to write MAC config: %d\n", rc); + return rc; + } + + /* Reconfigure the PLLs for the RGMII interfaces (required 125 MHz at + * gigabit, 25 MHz at 100 Mbps and 2.5 MHz at 10 Mbps). For MII and + * RMII no change of the clock setup is required. Actually, changing + * the clock setup does interrupt the clock signal for a certain time + * which causes trouble for all PHYs relying on this signal. + */ + if (!enabled) + return 0; + + phy_mode = mii->xmii_mode[port]; + if (phy_mode != XMII_MODE_RGMII) + return 0; + + return sja1105_clocking_setup_port(priv, port); +} + +static void sja1105_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct sja1105_private *priv = ds->priv; + + if (!phydev->link) + sja1105_adjust_port_config(priv, port, 0, false); + else + sja1105_adjust_port_config(priv, port, phydev->speed, true); +} + +static int sja1105_bridge_member(struct dsa_switch *ds, int port, + struct net_device *br, bool member) +{ + struct sja1105_l2_forwarding_entry *l2_fwd; + struct sja1105_private *priv = ds->priv; + int i, rc; + + l2_fwd = priv->static_config.tables[BLK_IDX_L2_FORWARDING].entries; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + /* Add this port to the forwarding matrix of the + * other ports in the same bridge, and viceversa. + */ + if (!dsa_is_user_port(ds, i)) + continue; + /* For the ports already under the bridge, only one thing needs + * to be done, and that is to add this port to their + * reachability domain. So we can perform the SPI write for + * them immediately. However, for this port itself (the one + * that is new to the bridge), we need to add all other ports + * to its reachability domain. So we do that incrementally in + * this loop, and perform the SPI write only at the end, once + * the domain contains all other bridge ports. + */ + if (i == port) + continue; + if (dsa_to_port(ds, i)->bridge_dev != br) + continue; + sja1105_port_allow_traffic(l2_fwd, i, port, member); + sja1105_port_allow_traffic(l2_fwd, port, i, member); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + i, &l2_fwd[i], true); + if (rc < 0) + return rc; + } + + return sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + port, &l2_fwd[port], true); +} + +static int sja1105_bridge_join(struct dsa_switch *ds, int port, + struct net_device *br) +{ + return sja1105_bridge_member(ds, port, br, true); +} + +static void sja1105_bridge_leave(struct dsa_switch *ds, int port, + struct net_device *br) +{ + sja1105_bridge_member(ds, port, br, false); +} + +static enum dsa_tag_protocol +sja1105_get_tag_protocol(struct dsa_switch *ds, int port) +{ + return DSA_TAG_PROTO_NONE; +} + +/* The programming model for the SJA1105 switch is "all-at-once" via static + * configuration tables. Some of these can be dynamically modified at runtime, + * but not the xMII mode parameters table. + * Furthermode, some PHYs may not have crystals for generating their clocks + * (e.g. RMII). Instead, their 50MHz clock is supplied via the SJA1105 port's + * ref_clk pin. So port clocking needs to be initialized early, before + * connecting to PHYs is attempted, otherwise they won't respond through MDIO. + * Setting correct PHY link speed does not matter now. + * But dsa_slave_phy_setup is called later than sja1105_setup, so the PHY + * bindings are not yet parsed by DSA core. We need to parse early so that we + * can populate the xMII mode parameters table. + */ +static int sja1105_setup(struct dsa_switch *ds) +{ + struct sja1105_dt_port ports[SJA1105_NUM_PORTS]; + struct sja1105_private *priv = ds->priv; + int rc; + + rc = sja1105_parse_dt(priv, ports); + if (rc < 0) { + dev_err(ds->dev, "Failed to parse DT: %d\n", rc); + return rc; + } + /* Create and send configuration down to device */ + rc = sja1105_static_config_load(priv, ports); + if (rc < 0) { + dev_err(ds->dev, "Failed to load static config: %d\n", rc); + return rc; + } + /* Configure the CGU (PHY link modes and speeds) */ + rc = sja1105_clocking_setup(priv); + if (rc < 0) { + dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc); + return rc; + } + + return 0; +} + +static const struct dsa_switch_ops sja1105_switch_ops = { + .get_tag_protocol = sja1105_get_tag_protocol, + .setup = sja1105_setup, + .adjust_link = sja1105_adjust_link, + .port_bridge_join = sja1105_bridge_join, + .port_bridge_leave = sja1105_bridge_leave, +}; + +static int sja1105_check_device_id(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 prod_id[SJA1105_SIZE_DEVICE_ID] = {0}; + struct device *dev = &priv->spidev->dev; + u64 device_id; + u64 part_no; + int rc; + + rc = sja1105_spi_send_int(priv, SPI_READ, regs->device_id, + &device_id, SJA1105_SIZE_DEVICE_ID); + if (rc < 0) + return rc; + + if (device_id != priv->info->device_id) { + dev_err(dev, "Expected device ID 0x%llx but read 0x%llx\n", + priv->info->device_id, device_id); + return -ENODEV; + } + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->prod_id, + prod_id, SJA1105_SIZE_DEVICE_ID); + if (rc < 0) + return rc; + + sja1105_unpack(prod_id, &part_no, 19, 4, SJA1105_SIZE_DEVICE_ID); + + if (part_no != priv->info->part_no) { + dev_err(dev, "Expected part number 0x%llx but read 0x%llx\n", + priv->info->part_no, part_no); + return -ENODEV; + } + + return 0; +} + +static int sja1105_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct sja1105_private *priv; + struct dsa_switch *ds; + int rc; + + if (!dev->of_node) { + dev_err(dev, "No DTS bindings for SJA1105 driver\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, sizeof(struct sja1105_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Configure the optional reset pin and bring up switch */ + priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset_gpio)) + dev_dbg(dev, "reset-gpios not defined, ignoring\n"); + else + sja1105_hw_reset(priv->reset_gpio, 1, 1); + + /* Populate our driver private structure (priv) based on + * the device tree node that was probed (spi) + */ + priv->spidev = spi; + spi_set_drvdata(spi, priv); + + /* Configure the SPI bus */ + spi->bits_per_word = 8; + rc = spi_setup(spi); + if (rc < 0) { + dev_err(dev, "Could not init SPI\n"); + return rc; + } + + priv->info = of_device_get_match_data(dev); + + /* Detect hardware device */ + rc = sja1105_check_device_id(priv); + if (rc < 0) { + dev_err(dev, "Device ID check failed: %d\n", rc); + return rc; + } + + dev_info(dev, "Probed switch chip: %s\n", priv->info->name); + + ds = dsa_switch_alloc(dev, SJA1105_NUM_PORTS); + if (!ds) + return -ENOMEM; + + ds->ops = &sja1105_switch_ops; + ds->priv = priv; + priv->ds = ds; + + return dsa_register_switch(priv->ds); +} + +static int sja1105_remove(struct spi_device *spi) +{ + struct sja1105_private *priv = spi_get_drvdata(spi); + + dsa_unregister_switch(priv->ds); + sja1105_static_config_free(&priv->static_config); + return 0; +} + +static const struct of_device_id sja1105_dt_ids[] = { + { .compatible = "nxp,sja1105e", .data = &sja1105e_info }, + { .compatible = "nxp,sja1105t", .data = &sja1105t_info }, + { .compatible = "nxp,sja1105p", .data = &sja1105p_info }, + { .compatible = "nxp,sja1105q", .data = &sja1105q_info }, + { .compatible = "nxp,sja1105r", .data = &sja1105r_info }, + { .compatible = "nxp,sja1105s", .data = &sja1105s_info }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, sja1105_dt_ids); + +static struct spi_driver sja1105_driver = { + .driver = { + .name = "sja1105", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sja1105_dt_ids), + }, + .probe = sja1105_probe, + .remove = sja1105_remove, +}; + +module_spi_driver(sja1105_driver); + +MODULE_AUTHOR("Vladimir Oltean "); +MODULE_AUTHOR("Georg Waibel "); +MODULE_DESCRIPTION("SJA1105 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c new file mode 100644 index 000000000000..c0b0057b09b3 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -0,0 +1,554 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean + */ +#include +#include +#include "sja1105.h" + +#define SJA1105_SIZE_RESET_CMD 4 +#define SJA1105_SIZE_SPI_MSG_HEADER 4 +#define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4) +#define SJA1105_SIZE_SPI_TRANSFER_MAX \ + (SJA1105_SIZE_SPI_MSG_HEADER + SJA1105_SIZE_SPI_MSG_MAXLEN) + +static int sja1105_spi_transfer(const struct sja1105_private *priv, + const void *tx, void *rx, int size) +{ + struct spi_device *spi = priv->spidev; + struct spi_transfer transfer = { + .tx_buf = tx, + .rx_buf = rx, + .len = size, + }; + struct spi_message msg; + int rc; + + if (size > SJA1105_SIZE_SPI_TRANSFER_MAX) { + dev_err(&spi->dev, "SPI message (%d) longer than max of %d\n", + size, SJA1105_SIZE_SPI_TRANSFER_MAX); + return -EMSGSIZE; + } + + spi_message_init(&msg); + spi_message_add_tail(&transfer, &msg); + + rc = spi_sync(spi, &msg); + if (rc < 0) { + dev_err(&spi->dev, "SPI transfer failed: %d\n", rc); + return rc; + } + + return rc; +} + +static void +sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg) +{ + const int size = SJA1105_SIZE_SPI_MSG_HEADER; + + memset(buf, 0, size); + + sja1105_pack(buf, &msg->access, 31, 31, size); + sja1105_pack(buf, &msg->read_count, 30, 25, size); + sja1105_pack(buf, &msg->address, 24, 4, size); +} + +/* If @rw is: + * - SPI_WRITE: creates and sends an SPI write message at absolute + * address reg_addr, taking size_bytes from *packed_buf + * - SPI_READ: creates and sends an SPI read message from absolute + * address reg_addr, writing size_bytes into *packed_buf + * + * This function should only be called if it is priorly known that + * @size_bytes is smaller than SIZE_SPI_MSG_MAXLEN. Larger packed buffers + * are chunked in smaller pieces by sja1105_spi_send_long_packed_buf below. + */ +int sja1105_spi_send_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + void *packed_buf, size_t size_bytes) +{ + u8 tx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0}; + u8 rx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0}; + const int msg_len = size_bytes + SJA1105_SIZE_SPI_MSG_HEADER; + struct sja1105_spi_message msg = {0}; + int rc; + + if (msg_len > SJA1105_SIZE_SPI_TRANSFER_MAX) + return -ERANGE; + + msg.access = rw; + msg.address = reg_addr; + if (rw == SPI_READ) + msg.read_count = size_bytes / 4; + + sja1105_spi_message_pack(tx_buf, &msg); + + if (rw == SPI_WRITE) + memcpy(tx_buf + SJA1105_SIZE_SPI_MSG_HEADER, + packed_buf, size_bytes); + + rc = sja1105_spi_transfer(priv, tx_buf, rx_buf, msg_len); + if (rc < 0) + return rc; + + if (rw == SPI_READ) + memcpy(packed_buf, rx_buf + SJA1105_SIZE_SPI_MSG_HEADER, + size_bytes); + + return 0; +} + +/* If @rw is: + * - SPI_WRITE: creates and sends an SPI write message at absolute + * address reg_addr, taking size_bytes from *packed_buf + * - SPI_READ: creates and sends an SPI read message from absolute + * address reg_addr, writing size_bytes into *packed_buf + * + * The u64 *value is unpacked, meaning that it's stored in the native + * CPU endianness and directly usable by software running on the core. + * + * This is a wrapper around sja1105_spi_send_packed_buf(). + */ +int sja1105_spi_send_int(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + u64 *value, u64 size_bytes) +{ + u8 packed_buf[SJA1105_SIZE_SPI_MSG_MAXLEN]; + int rc; + + if (size_bytes > SJA1105_SIZE_SPI_MSG_MAXLEN) + return -ERANGE; + + if (rw == SPI_WRITE) + sja1105_pack(packed_buf, value, 8 * size_bytes - 1, 0, + size_bytes); + + rc = sja1105_spi_send_packed_buf(priv, rw, reg_addr, packed_buf, + size_bytes); + + if (rw == SPI_READ) + sja1105_unpack(packed_buf, value, 8 * size_bytes - 1, 0, + size_bytes); + + return rc; +} + +/* Should be used if a @packed_buf larger than SJA1105_SIZE_SPI_MSG_MAXLEN + * must be sent/received. Splitting the buffer into chunks and assembling + * those into SPI messages is done automatically by this function. + */ +int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 base_addr, + void *packed_buf, u64 buf_len) +{ + struct chunk { + void *buf_ptr; + int len; + u64 spi_address; + } chunk; + int distance_to_end; + int rc; + + /* Initialize chunk */ + chunk.buf_ptr = packed_buf; + chunk.spi_address = base_addr; + chunk.len = min_t(int, buf_len, SJA1105_SIZE_SPI_MSG_MAXLEN); + + while (chunk.len) { + rc = sja1105_spi_send_packed_buf(priv, rw, chunk.spi_address, + chunk.buf_ptr, chunk.len); + if (rc < 0) + return rc; + + chunk.buf_ptr += chunk.len; + chunk.spi_address += chunk.len / 4; + distance_to_end = (uintptr_t)(packed_buf + buf_len - + chunk.buf_ptr); + chunk.len = min(distance_to_end, SJA1105_SIZE_SPI_MSG_MAXLEN); + } + + return 0; +} + +/* Back-ported structure from UM11040 Table 112. + * Reset control register (addr. 100440h) + * In the SJA1105 E/T, only warm_rst and cold_rst are + * supported (exposed in UM10944 as rst_ctrl), but the bit + * offsets of warm_rst and cold_rst are actually reversed. + */ +struct sja1105_reset_cmd { + u64 switch_rst; + u64 cfg_rst; + u64 car_rst; + u64 otp_rst; + u64 warm_rst; + u64 cold_rst; + u64 por_rst; +}; + +static void +sja1105et_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset) +{ + const int size = SJA1105_SIZE_RESET_CMD; + + memset(buf, 0, size); + + sja1105_pack(buf, &reset->cold_rst, 3, 3, size); + sja1105_pack(buf, &reset->warm_rst, 2, 2, size); +} + +static void +sja1105pqrs_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset) +{ + const int size = SJA1105_SIZE_RESET_CMD; + + memset(buf, 0, size); + + sja1105_pack(buf, &reset->switch_rst, 8, 8, size); + sja1105_pack(buf, &reset->cfg_rst, 7, 7, size); + sja1105_pack(buf, &reset->car_rst, 5, 5, size); + sja1105_pack(buf, &reset->otp_rst, 4, 4, size); + sja1105_pack(buf, &reset->warm_rst, 3, 3, size); + sja1105_pack(buf, &reset->cold_rst, 2, 2, size); + sja1105_pack(buf, &reset->por_rst, 1, 1, size); +} + +static int sja1105et_reset_cmd(const void *ctx, const void *data) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_reset_cmd *reset = data; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + u8 packed_buf[SJA1105_SIZE_RESET_CMD]; + + if (reset->switch_rst || + reset->cfg_rst || + reset->car_rst || + reset->otp_rst || + reset->por_rst) { + dev_err(dev, "Only warm and cold reset is supported " + "for SJA1105 E/T!\n"); + return -EINVAL; + } + + if (reset->warm_rst) + dev_dbg(dev, "Warm reset requested\n"); + if (reset->cold_rst) + dev_dbg(dev, "Cold reset requested\n"); + + sja1105et_reset_cmd_pack(packed_buf, reset); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu, + packed_buf, SJA1105_SIZE_RESET_CMD); +} + +static int sja1105pqrs_reset_cmd(const void *ctx, const void *data) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_reset_cmd *reset = data; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + u8 packed_buf[SJA1105_SIZE_RESET_CMD]; + + if (reset->switch_rst) + dev_dbg(dev, "Main reset for all functional modules requested\n"); + if (reset->cfg_rst) + dev_dbg(dev, "Chip configuration reset requested\n"); + if (reset->car_rst) + dev_dbg(dev, "Clock and reset control logic reset requested\n"); + if (reset->otp_rst) + dev_dbg(dev, "OTP read cycle for reading product " + "config settings requested\n"); + if (reset->warm_rst) + dev_dbg(dev, "Warm reset requested\n"); + if (reset->cold_rst) + dev_dbg(dev, "Cold reset requested\n"); + if (reset->por_rst) + dev_dbg(dev, "Power-on reset requested\n"); + + sja1105pqrs_reset_cmd_pack(packed_buf, reset); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu, + packed_buf, SJA1105_SIZE_RESET_CMD); +} + +static int sja1105_cold_reset(const struct sja1105_private *priv) +{ + struct sja1105_reset_cmd reset = {0}; + + reset.cold_rst = 1; + return priv->info->reset_cmd(priv, &reset); +} + +struct sja1105_status { + u64 configs; + u64 crcchkl; + u64 ids; + u64 crcchkg; +}; + +/* This is not reading the entire General Status area, which is also + * divergent between E/T and P/Q/R/S, but only the relevant bits for + * ensuring that the static config upload procedure was successful. + */ +static void sja1105_status_unpack(void *buf, struct sja1105_status *status) +{ + /* So that addition translates to 4 bytes */ + u32 *p = buf; + + /* device_id is missing from the buffer, but we don't + * want to diverge from the manual definition of the + * register addresses, so we'll back off one step with + * the register pointer, and never access p[0]. + */ + p--; + sja1105_unpack(p + 0x1, &status->configs, 31, 31, 4); + sja1105_unpack(p + 0x1, &status->crcchkl, 30, 30, 4); + sja1105_unpack(p + 0x1, &status->ids, 29, 29, 4); + sja1105_unpack(p + 0x1, &status->crcchkg, 28, 28, 4); +} + +static int sja1105_status_get(struct sja1105_private *priv, + struct sja1105_status *status) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[4]; + int rc; + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, + regs->status, + packed_buf, 4); + if (rc < 0) + return rc; + + sja1105_status_unpack(packed_buf, status); + + return 0; +} + +/* Not const because unpacking priv->static_config into buffers and preparing + * for upload requires the recalculation of table CRCs and updating the + * structures with these. + */ +static int +static_config_buf_prepare_for_upload(struct sja1105_private *priv, + void *config_buf, int buf_len) +{ + struct sja1105_static_config *config = &priv->static_config; + struct sja1105_table_header final_header; + sja1105_config_valid_t valid; + char *final_header_ptr; + int crc_len; + + valid = sja1105_static_config_check_valid(config); + if (valid != SJA1105_CONFIG_OK) { + dev_err(&priv->spidev->dev, + sja1105_static_config_error_msg[valid]); + return -EINVAL; + } + + /* Write Device ID and config tables to config_buf */ + sja1105_static_config_pack(config_buf, config); + /* Recalculate CRC of the last header (right now 0xDEADBEEF). + * Don't include the CRC field itself. + */ + crc_len = buf_len - 4; + /* Read the whole table header */ + final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER; + sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK); + /* Modify */ + final_header.crc = sja1105_crc32(config_buf, crc_len); + /* Rewrite */ + sja1105_table_header_packing(final_header_ptr, &final_header, PACK); + + return 0; +} + +#define RETRIES 10 + +int sja1105_static_config_upload(struct sja1105_private *priv) +{ + struct sja1105_static_config *config = &priv->static_config; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = &priv->spidev->dev; + struct sja1105_status status; + int rc, retries = RETRIES; + u8 *config_buf; + int buf_len; + + buf_len = sja1105_static_config_get_length(config); + config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL); + if (!config_buf) + return -ENOMEM; + + rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len); + if (rc < 0) { + dev_err(dev, "Invalid config, cannot upload\n"); + return -EINVAL; + } + do { + /* Put the SJA1105 in programming mode */ + rc = sja1105_cold_reset(priv); + if (rc < 0) { + dev_err(dev, "Failed to reset switch, retrying...\n"); + continue; + } + /* Wait for the switch to come out of reset */ + usleep_range(1000, 5000); + /* Upload the static config to the device */ + rc = sja1105_spi_send_long_packed_buf(priv, SPI_WRITE, + regs->config, + config_buf, buf_len); + if (rc < 0) { + dev_err(dev, "Failed to upload config, retrying...\n"); + continue; + } + /* Check that SJA1105 responded well to the config upload */ + rc = sja1105_status_get(priv, &status); + if (rc < 0) + continue; + + if (status.ids == 1) { + dev_err(dev, "Mismatch between hardware and static config " + "device id. Wrote 0x%llx, wants 0x%llx\n", + config->device_id, priv->info->device_id); + continue; + } + if (status.crcchkl == 1) { + dev_err(dev, "Switch reported invalid local CRC on " + "the uploaded config, retrying...\n"); + continue; + } + if (status.crcchkg == 1) { + dev_err(dev, "Switch reported invalid global CRC on " + "the uploaded config, retrying...\n"); + continue; + } + if (status.configs == 0) { + dev_err(dev, "Switch reported that configuration is " + "invalid, retrying...\n"); + continue; + } + } while (--retries && (status.crcchkl == 1 || status.crcchkg == 1 || + status.configs == 0 || status.ids == 1)); + + if (!retries) { + rc = -EIO; + dev_err(dev, "Failed to upload config to device, giving up\n"); + goto out; + } else if (retries != RETRIES - 1) { + dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries); + } + + dev_info(dev, "Reset switch and programmed static config\n"); +out: + kfree(config_buf); + return rc; +} + +struct sja1105_regs sja1105et_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .config = 0x020000, + .rgu = 0x100440, + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + /* UM10944.pdf, Table 86, ACU Register overview */ + .rgmii_pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .mac = {0x200, 0x202, 0x204, 0x206, 0x208}, + .mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440}, + .mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640}, + /* UM10944.pdf, Table 78, CGU Register overview */ + .mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F}, + .mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030}, + .mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, + .mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035}, + .rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032}, + .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031}, + .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, +}; + +struct sja1105_regs sja1105pqrs_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .config = 0x020000, + .rgu = 0x100440, + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + /* UM10944.pdf, Table 86, ACU Register overview */ + .rgmii_pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .mac = {0x200, 0x202, 0x204, 0x206, 0x208}, + .mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440}, + .mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640}, + /* UM11040.pdf, Table 114 */ + .mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B}, + .mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C}, + .mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, + .mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030}, + .rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E}, + .rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D}, + .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, + .qlevel = {0x604, 0x614, 0x624, 0x634, 0x644}, +}; + +struct sja1105_info sja1105e_info = { + .device_id = SJA1105E_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105e_table_ops, + .dyn_ops = sja1105et_dyn_ops, + .reset_cmd = sja1105et_reset_cmd, + .regs = &sja1105et_regs, + .name = "SJA1105E", +}; +struct sja1105_info sja1105t_info = { + .device_id = SJA1105T_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105t_table_ops, + .dyn_ops = sja1105et_dyn_ops, + .reset_cmd = sja1105et_reset_cmd, + .regs = &sja1105et_regs, + .name = "SJA1105T", +}; +struct sja1105_info sja1105p_info = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105P_PART_NO, + .static_ops = sja1105p_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .name = "SJA1105P", +}; +struct sja1105_info sja1105q_info = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105Q_PART_NO, + .static_ops = sja1105q_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .name = "SJA1105Q", +}; +struct sja1105_info sja1105r_info = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105R_PART_NO, + .static_ops = sja1105r_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .name = "SJA1105R", +}; +struct sja1105_info sja1105s_info = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105S_PART_NO, + .static_ops = sja1105s_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .regs = &sja1105pqrs_regs, + .reset_cmd = sja1105pqrs_reset_cmd, + .name = "SJA1105S", +}; + diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c new file mode 100644 index 000000000000..84e64729dd82 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -0,0 +1,950 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean + */ +#include "sja1105_static_config.h" +#include +#include +#include +#include + +/* Convenience wrappers over the generic packing functions. These take into + * account the SJA1105 memory layout quirks and provide some level of + * programmer protection against incorrect API use. The errors are not expected + * to occur durring runtime, therefore printing and swallowing them here is + * appropriate instead of clutterring up higher-level code. + */ +void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len) +{ + int rc = packing(buf, (u64 *)val, start, end, len, + PACK, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) { + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + } else if (rc == -ERANGE) { + if ((start - end + 1) > 64) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + else + pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", + *val, start, end); + } + dump_stack(); +} + +void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len) +{ + int rc = packing((void *)buf, val, start, end, len, + UNPACK, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + else if (rc == -ERANGE) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + dump_stack(); +} + +void sja1105_packing(void *buf, u64 *val, int start, int end, + size_t len, enum packing_op op) +{ + int rc = packing(buf, val, start, end, len, op, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) { + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + } else if (rc == -ERANGE) { + if ((start - end + 1) > 64) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + else + pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", + *val, start, end); + } + dump_stack(); +} + +/* Little-endian Ethernet CRC32 of data packed as big-endian u32 words */ +u32 sja1105_crc32(const void *buf, size_t len) +{ + unsigned int i; + u64 word; + u32 crc; + + /* seed */ + crc = ~0; + for (i = 0; i < len; i += 4) { + sja1105_unpack((void *)buf + i, &word, 31, 0, 4); + crc = crc32_le(crc, (u8 *)&word, 4); + } + return ~crc; +} + +static size_t sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vllupformat, 319, 319, size, op); + sja1105_packing(buf, &entry->mirr_ptacu, 318, 318, size, op); + sja1105_packing(buf, &entry->switchid, 317, 315, size, op); + sja1105_packing(buf, &entry->hostprio, 314, 312, size, op); + sja1105_packing(buf, &entry->mac_fltres1, 311, 264, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 263, 216, size, op); + sja1105_packing(buf, &entry->mac_flt1, 215, 168, size, op); + sja1105_packing(buf, &entry->mac_flt0, 167, 120, size, op); + sja1105_packing(buf, &entry->incl_srcpt1, 119, 119, size, op); + sja1105_packing(buf, &entry->incl_srcpt0, 118, 118, size, op); + sja1105_packing(buf, &entry->send_meta1, 117, 117, size, op); + sja1105_packing(buf, &entry->send_meta0, 116, 116, size, op); + sja1105_packing(buf, &entry->casc_port, 115, 113, size, op); + sja1105_packing(buf, &entry->host_port, 112, 110, size, op); + sja1105_packing(buf, &entry->mirr_port, 109, 107, size, op); + sja1105_packing(buf, &entry->vlmarker, 106, 75, size, op); + sja1105_packing(buf, &entry->vlmask, 74, 43, size, op); + sja1105_packing(buf, &entry->tpid, 42, 27, size, op); + sja1105_packing(buf, &entry->ignore2stf, 26, 26, size, op); + sja1105_packing(buf, &entry->tpid2, 25, 10, size, op); + return size; +} + +static size_t +sja1105pqrs_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vllupformat, 351, 351, size, op); + sja1105_packing(buf, &entry->mirr_ptacu, 350, 350, size, op); + sja1105_packing(buf, &entry->switchid, 349, 347, size, op); + sja1105_packing(buf, &entry->hostprio, 346, 344, size, op); + sja1105_packing(buf, &entry->mac_fltres1, 343, 296, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 295, 248, size, op); + sja1105_packing(buf, &entry->mac_flt1, 247, 200, size, op); + sja1105_packing(buf, &entry->mac_flt0, 199, 152, size, op); + sja1105_packing(buf, &entry->incl_srcpt1, 151, 151, size, op); + sja1105_packing(buf, &entry->incl_srcpt0, 150, 150, size, op); + sja1105_packing(buf, &entry->send_meta1, 149, 149, size, op); + sja1105_packing(buf, &entry->send_meta0, 148, 148, size, op); + sja1105_packing(buf, &entry->casc_port, 147, 145, size, op); + sja1105_packing(buf, &entry->host_port, 144, 142, size, op); + sja1105_packing(buf, &entry->mirr_port, 141, 139, size, op); + sja1105_packing(buf, &entry->vlmarker, 138, 107, size, op); + sja1105_packing(buf, &entry->vlmask, 106, 75, size, op); + sja1105_packing(buf, &entry->tpid, 74, 59, size, op); + sja1105_packing(buf, &entry->ignore2stf, 58, 58, size, op); + sja1105_packing(buf, &entry->tpid2, 57, 42, size, op); + sja1105_packing(buf, &entry->queue_ts, 41, 41, size, op); + sja1105_packing(buf, &entry->egrmirrvid, 40, 29, size, op); + sja1105_packing(buf, &entry->egrmirrpcp, 28, 26, size, op); + sja1105_packing(buf, &entry->egrmirrdei, 25, 25, size, op); + sja1105_packing(buf, &entry->replay_port, 24, 22, size, op); + return size; +} + +static size_t +sja1105_l2_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY; + struct sja1105_l2_forwarding_params_entry *entry = entry_ptr; + int offset, i; + + sja1105_packing(buf, &entry->max_dynp, 95, 93, size, op); + for (i = 0, offset = 13; i < 8; i++, offset += 10) + sja1105_packing(buf, &entry->part_spc[i], + offset + 9, offset + 0, size, op); + return size; +} + +size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_ENTRY; + struct sja1105_l2_forwarding_entry *entry = entry_ptr; + int offset, i; + + sja1105_packing(buf, &entry->bc_domain, 63, 59, size, op); + sja1105_packing(buf, &entry->reach_port, 58, 54, size, op); + sja1105_packing(buf, &entry->fl_domain, 53, 49, size, op); + for (i = 0, offset = 25; i < 8; i++, offset += 3) + sja1105_packing(buf, &entry->vlan_pmap[i], + offset + 2, offset + 0, size, op); + return size; +} + +static size_t +sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY; + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->maxage, 31, 17, size, op); + sja1105_packing(buf, &entry->dyn_tbsz, 16, 14, size, op); + sja1105_packing(buf, &entry->poly, 13, 6, size, op); + sja1105_packing(buf, &entry->shared_learn, 5, 5, size, op); + sja1105_packing(buf, &entry->no_enf_hostprt, 4, 4, size, op); + sja1105_packing(buf, &entry->no_mgmt_learn, 3, 3, size, op); + return size; +} + +static size_t +sja1105pqrs_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY; + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->maxage, 57, 43, size, op); + sja1105_packing(buf, &entry->shared_learn, 27, 27, size, op); + sja1105_packing(buf, &entry->no_enf_hostprt, 26, 26, size, op); + sja1105_packing(buf, &entry->no_mgmt_learn, 25, 25, size, op); + return size; +} + +size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_l2_lookup_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vlanid, 95, 84, size, op); + sja1105_packing(buf, &entry->macaddr, 83, 36, size, op); + sja1105_packing(buf, &entry->destports, 35, 31, size, op); + sja1105_packing(buf, &entry->enfport, 30, 30, size, op); + sja1105_packing(buf, &entry->index, 29, 20, size, op); + return size; +} + +size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_l2_lookup_entry *entry = entry_ptr; + + /* These are static L2 lookup entries, so the structure + * should match UM11040 Table 16/17 definitions when + * LOCKEDS is 1. + */ + sja1105_packing(buf, &entry->vlanid, 81, 70, size, op); + sja1105_packing(buf, &entry->macaddr, 69, 22, size, op); + sja1105_packing(buf, &entry->destports, 21, 17, size, op); + sja1105_packing(buf, &entry->enfport, 16, 16, size, op); + sja1105_packing(buf, &entry->index, 15, 6, size, op); + return size; +} + +static size_t sja1105_l2_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_POLICING_ENTRY; + struct sja1105_l2_policing_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->sharindx, 63, 58, size, op); + sja1105_packing(buf, &entry->smax, 57, 42, size, op); + sja1105_packing(buf, &entry->rate, 41, 26, size, op); + sja1105_packing(buf, &entry->maxlen, 25, 15, size, op); + sja1105_packing(buf, &entry->partition, 14, 12, size, op); + return size; +} + +static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 72; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->ifg, 71, 67, size, op); + sja1105_packing(buf, &entry->speed, 66, 65, size, op); + sja1105_packing(buf, &entry->tp_delin, 64, 49, size, op); + sja1105_packing(buf, &entry->tp_delout, 48, 33, size, op); + sja1105_packing(buf, &entry->maxage, 32, 25, size, op); + sja1105_packing(buf, &entry->vlanprio, 24, 22, size, op); + sja1105_packing(buf, &entry->vlanid, 21, 10, size, op); + sja1105_packing(buf, &entry->ing_mirr, 9, 9, size, op); + sja1105_packing(buf, &entry->egr_mirr, 8, 8, size, op); + sja1105_packing(buf, &entry->drpnona664, 7, 7, size, op); + sja1105_packing(buf, &entry->drpdtag, 6, 6, size, op); + sja1105_packing(buf, &entry->drpuntag, 5, 5, size, op); + sja1105_packing(buf, &entry->retag, 4, 4, size, op); + sja1105_packing(buf, &entry->dyn_learn, 3, 3, size, op); + sja1105_packing(buf, &entry->egress, 2, 2, size, op); + sja1105_packing(buf, &entry->ingress, 1, 1, size, op); + return size; +} + +size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 104; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->ifg, 103, 99, size, op); + sja1105_packing(buf, &entry->speed, 98, 97, size, op); + sja1105_packing(buf, &entry->tp_delin, 96, 81, size, op); + sja1105_packing(buf, &entry->tp_delout, 80, 65, size, op); + sja1105_packing(buf, &entry->maxage, 64, 57, size, op); + sja1105_packing(buf, &entry->vlanprio, 56, 54, size, op); + sja1105_packing(buf, &entry->vlanid, 53, 42, size, op); + sja1105_packing(buf, &entry->ing_mirr, 41, 41, size, op); + sja1105_packing(buf, &entry->egr_mirr, 40, 40, size, op); + sja1105_packing(buf, &entry->drpnona664, 39, 39, size, op); + sja1105_packing(buf, &entry->drpdtag, 38, 38, size, op); + sja1105_packing(buf, &entry->drpuntag, 35, 35, size, op); + sja1105_packing(buf, &entry->retag, 34, 34, size, op); + sja1105_packing(buf, &entry->dyn_learn, 33, 33, size, op); + sja1105_packing(buf, &entry->egress, 32, 32, size, op); + sja1105_packing(buf, &entry->ingress, 31, 31, size, op); + return size; +} + +size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY; + struct sja1105_vlan_lookup_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->ving_mirr, 63, 59, size, op); + sja1105_packing(buf, &entry->vegr_mirr, 58, 54, size, op); + sja1105_packing(buf, &entry->vmemb_port, 53, 49, size, op); + sja1105_packing(buf, &entry->vlan_bc, 48, 44, size, op); + sja1105_packing(buf, &entry->tag_port, 43, 39, size, op); + sja1105_packing(buf, &entry->vlanid, 38, 27, size, op); + return size; +} + +static size_t sja1105_xmii_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_XMII_PARAMS_ENTRY; + struct sja1105_xmii_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 17; i < 5; i++, offset += 3) { + sja1105_packing(buf, &entry->xmii_mode[i], + offset + 1, offset + 0, size, op); + sja1105_packing(buf, &entry->phy_mac[i], + offset + 2, offset + 2, size, op); + } + return size; +} + +size_t sja1105_table_header_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_TABLE_HEADER; + struct sja1105_table_header *entry = entry_ptr; + + sja1105_packing(buf, &entry->block_id, 31, 24, size, op); + sja1105_packing(buf, &entry->len, 55, 32, size, op); + sja1105_packing(buf, &entry->crc, 95, 64, size, op); + return size; +} + +/* WARNING: the *hdr pointer is really non-const, because it is + * modifying the CRC of the header for a 2-stage packing operation + */ +void +sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr) +{ + /* First pack the table as-is, then calculate the CRC, and + * finally put the proper CRC into the packed buffer + */ + memset(buf, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(buf, hdr, PACK); + hdr->crc = sja1105_crc32(buf, SJA1105_SIZE_TABLE_HEADER - 4); + sja1105_pack(buf + SJA1105_SIZE_TABLE_HEADER - 4, &hdr->crc, 31, 0, 4); +} + +static void sja1105_table_write_crc(u8 *table_start, u8 *crc_ptr) +{ + u64 computed_crc; + int len_bytes; + + len_bytes = (uintptr_t)(crc_ptr - table_start); + computed_crc = sja1105_crc32(table_start, len_bytes); + sja1105_pack(crc_ptr, &computed_crc, 31, 0, 4); +} + +/* The block IDs that the switches support are unfortunately sparse, so keep a + * mapping table to "block indices" and translate back and forth so that we + * don't waste useless memory in struct sja1105_static_config. + * Also, since the block id comes from essentially untrusted input (unpacking + * the static config from userspace) it has to be sanitized (range-checked) + * before blindly indexing kernel memory with the blk_idx. + */ +static u64 blk_id_map[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = BLKID_L2_LOOKUP, + [BLK_IDX_L2_POLICING] = BLKID_L2_POLICING, + [BLK_IDX_VLAN_LOOKUP] = BLKID_VLAN_LOOKUP, + [BLK_IDX_L2_FORWARDING] = BLKID_L2_FORWARDING, + [BLK_IDX_MAC_CONFIG] = BLKID_MAC_CONFIG, + [BLK_IDX_L2_LOOKUP_PARAMS] = BLKID_L2_LOOKUP_PARAMS, + [BLK_IDX_L2_FORWARDING_PARAMS] = BLKID_L2_FORWARDING_PARAMS, + [BLK_IDX_GENERAL_PARAMS] = BLKID_GENERAL_PARAMS, + [BLK_IDX_XMII_PARAMS] = BLKID_XMII_PARAMS, +}; + +const char *sja1105_static_config_error_msg[] = { + [SJA1105_CONFIG_OK] = "", + [SJA1105_MISSING_L2_POLICING_TABLE] = + "l2-policing-table needs to have at least one entry", + [SJA1105_MISSING_L2_FORWARDING_TABLE] = + "l2-forwarding-table is either missing or incomplete", + [SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE] = + "l2-forwarding-parameters-table is missing", + [SJA1105_MISSING_GENERAL_PARAMS_TABLE] = + "general-parameters-table is missing", + [SJA1105_MISSING_VLAN_TABLE] = + "vlan-lookup-table needs to have at least the default untagged VLAN", + [SJA1105_MISSING_XMII_TABLE] = + "xmii-table is missing", + [SJA1105_MISSING_MAC_TABLE] = + "mac-configuration-table needs to contain an entry for each port", + [SJA1105_OVERCOMMITTED_FRAME_MEMORY] = + "Not allowed to overcommit frame memory. L2 memory partitions " + "and VL memory partitions share the same space. The sum of all " + "16 memory partitions is not allowed to be larger than 929 " + "128-byte blocks (or 910 with retagging). Please adjust " + "l2-forwarding-parameters-table.part_spc and/or " + "vl-forwarding-parameters-table.partspc.", +}; + +sja1105_config_valid_t +static_config_check_memory_size(const struct sja1105_table *tables) +{ + const struct sja1105_l2_forwarding_params_entry *l2_fwd_params; + int i, mem = 0; + + l2_fwd_params = tables[BLK_IDX_L2_FORWARDING_PARAMS].entries; + + for (i = 0; i < 8; i++) + mem += l2_fwd_params->part_spc[i]; + + if (mem > SJA1105_MAX_FRAME_MEMORY) + return SJA1105_OVERCOMMITTED_FRAME_MEMORY; + + return SJA1105_CONFIG_OK; +} + +sja1105_config_valid_t +sja1105_static_config_check_valid(const struct sja1105_static_config *config) +{ + const struct sja1105_table *tables = config->tables; +#define IS_FULL(blk_idx) \ + (tables[blk_idx].entry_count == tables[blk_idx].ops->max_entry_count) + + if (tables[BLK_IDX_L2_POLICING].entry_count == 0) + return SJA1105_MISSING_L2_POLICING_TABLE; + + if (tables[BLK_IDX_VLAN_LOOKUP].entry_count == 0) + return SJA1105_MISSING_VLAN_TABLE; + + if (!IS_FULL(BLK_IDX_L2_FORWARDING)) + return SJA1105_MISSING_L2_FORWARDING_TABLE; + + if (!IS_FULL(BLK_IDX_MAC_CONFIG)) + return SJA1105_MISSING_MAC_TABLE; + + if (!IS_FULL(BLK_IDX_L2_FORWARDING_PARAMS)) + return SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE; + + if (!IS_FULL(BLK_IDX_GENERAL_PARAMS)) + return SJA1105_MISSING_GENERAL_PARAMS_TABLE; + + if (!IS_FULL(BLK_IDX_XMII_PARAMS)) + return SJA1105_MISSING_XMII_TABLE; + + return static_config_check_memory_size(tables); +#undef IS_FULL +} + +void +sja1105_static_config_pack(void *buf, struct sja1105_static_config *config) +{ + struct sja1105_table_header header = {0}; + enum sja1105_blk_idx i; + char *p = buf; + int j; + + sja1105_pack(p, &config->device_id, 31, 0, 4); + p += SJA1105_SIZE_DEVICE_ID; + + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + char *table_start; + + table = &config->tables[i]; + if (!table->entry_count) + continue; + + header.block_id = blk_id_map[i]; + header.len = table->entry_count * + table->ops->packed_entry_size / 4; + sja1105_table_header_pack_with_crc(p, &header); + p += SJA1105_SIZE_TABLE_HEADER; + table_start = p; + for (j = 0; j < table->entry_count; j++) { + u8 *entry_ptr = table->entries; + + entry_ptr += j * table->ops->unpacked_entry_size; + memset(p, 0, table->ops->packed_entry_size); + table->ops->packing(p, entry_ptr, PACK); + p += table->ops->packed_entry_size; + } + sja1105_table_write_crc(table_start, p); + p += 4; + } + /* Final header: + * Block ID does not matter + * Length of 0 marks that header is final + * CRC will be replaced on-the-fly on "config upload" + */ + header.block_id = 0; + header.len = 0; + header.crc = 0xDEADBEEF; + memset(p, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(p, &header, PACK); +} + +size_t +sja1105_static_config_get_length(const struct sja1105_static_config *config) +{ + unsigned int sum; + unsigned int header_count; + enum sja1105_blk_idx i; + + /* Ending header */ + header_count = 1; + sum = SJA1105_SIZE_DEVICE_ID; + + /* Tables (headers and entries) */ + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + + table = &config->tables[i]; + if (table->entry_count) + header_count++; + + sum += table->ops->packed_entry_size * table->entry_count; + } + /* Headers have an additional CRC at the end */ + sum += header_count * (SJA1105_SIZE_TABLE_HEADER + 4); + /* Last header does not have an extra CRC because there is no data */ + sum -= 4; + + return sum; +} + +/* Compatibility matrices */ + +/* SJA1105E: First generation, no TTEthernet */ +struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105et_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105et_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105et_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105et_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105T: First generation, TTEthernet */ +struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105et_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105et_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105et_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105et_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105P: Second generation, no TTEthernet, no SGMII */ +struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105Q: Second generation, TTEthernet, no SGMII */ +struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105R: Second generation, no TTEthernet, SGMII */ +struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105S: Second generation, TTEthernet, SGMII */ +struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +int sja1105_static_config_init(struct sja1105_static_config *config, + const struct sja1105_table_ops *static_ops, + u64 device_id) +{ + enum sja1105_blk_idx i; + + *config = (struct sja1105_static_config) {0}; + + /* Transfer static_ops array from priv into per-table ops + * for handier access + */ + for (i = 0; i < BLK_IDX_MAX; i++) + config->tables[i].ops = &static_ops[i]; + + config->device_id = device_id; + return 0; +} + +void sja1105_static_config_free(struct sja1105_static_config *config) +{ + enum sja1105_blk_idx i; + + for (i = 0; i < BLK_IDX_MAX; i++) { + if (config->tables[i].entry_count) { + kfree(config->tables[i].entries); + config->tables[i].entry_count = 0; + } + } +} + diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h new file mode 100644 index 000000000000..f4f6142c16ed --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -0,0 +1,251 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean + */ +#ifndef _SJA1105_STATIC_CONFIG_H +#define _SJA1105_STATIC_CONFIG_H + +#include +#include +#include + +#define SJA1105_SIZE_DEVICE_ID 4 +#define SJA1105_SIZE_TABLE_HEADER 12 +#define SJA1105_SIZE_L2_POLICING_ENTRY 8 +#define SJA1105_SIZE_VLAN_LOOKUP_ENTRY 8 +#define SJA1105_SIZE_L2_FORWARDING_ENTRY 8 +#define SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY 12 +#define SJA1105_SIZE_XMII_PARAMS_ENTRY 4 +#define SJA1105ET_SIZE_L2_LOOKUP_ENTRY 12 +#define SJA1105ET_SIZE_MAC_CONFIG_ENTRY 28 +#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY 4 +#define SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY 40 +#define SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY 20 +#define SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY 32 +#define SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY 16 +#define SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY 44 + +/* UM10944.pdf Page 11, Table 2. Configuration Blocks */ +enum { + BLKID_L2_LOOKUP = 0x05, + BLKID_L2_POLICING = 0x06, + BLKID_VLAN_LOOKUP = 0x07, + BLKID_L2_FORWARDING = 0x08, + BLKID_MAC_CONFIG = 0x09, + BLKID_L2_LOOKUP_PARAMS = 0x0D, + BLKID_L2_FORWARDING_PARAMS = 0x0E, + BLKID_GENERAL_PARAMS = 0x11, + BLKID_XMII_PARAMS = 0x4E, +}; + +enum sja1105_blk_idx { + BLK_IDX_L2_LOOKUP = 0, + BLK_IDX_L2_POLICING, + BLK_IDX_VLAN_LOOKUP, + BLK_IDX_L2_FORWARDING, + BLK_IDX_MAC_CONFIG, + BLK_IDX_L2_LOOKUP_PARAMS, + BLK_IDX_L2_FORWARDING_PARAMS, + BLK_IDX_GENERAL_PARAMS, + BLK_IDX_XMII_PARAMS, + BLK_IDX_MAX, + /* Fake block indices that are only valid for dynamic access */ + BLK_IDX_MGMT_ROUTE, + BLK_IDX_MAX_DYN, + BLK_IDX_INVAL = -1, +}; + +#define SJA1105_MAX_L2_LOOKUP_COUNT 1024 +#define SJA1105_MAX_L2_POLICING_COUNT 45 +#define SJA1105_MAX_VLAN_LOOKUP_COUNT 4096 +#define SJA1105_MAX_L2_FORWARDING_COUNT 13 +#define SJA1105_MAX_MAC_CONFIG_COUNT 5 +#define SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT 1 +#define SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT 1 +#define SJA1105_MAX_GENERAL_PARAMS_COUNT 1 +#define SJA1105_MAX_XMII_PARAMS_COUNT 1 + +#define SJA1105_MAX_FRAME_MEMORY 929 + +#define SJA1105E_DEVICE_ID 0x9C00000Cull +#define SJA1105T_DEVICE_ID 0x9E00030Eull +#define SJA1105PR_DEVICE_ID 0xAF00030Eull +#define SJA1105QS_DEVICE_ID 0xAE00030Eull + +#define SJA1105ET_PART_NO 0x9A83 +#define SJA1105P_PART_NO 0x9A84 +#define SJA1105Q_PART_NO 0x9A85 +#define SJA1105R_PART_NO 0x9A86 +#define SJA1105S_PART_NO 0x9A87 + +struct sja1105_general_params_entry { + u64 vllupformat; + u64 mirr_ptacu; + u64 switchid; + u64 hostprio; + u64 mac_fltres1; + u64 mac_fltres0; + u64 mac_flt1; + u64 mac_flt0; + u64 incl_srcpt1; + u64 incl_srcpt0; + u64 send_meta1; + u64 send_meta0; + u64 casc_port; + u64 host_port; + u64 mirr_port; + u64 vlmarker; + u64 vlmask; + u64 tpid; + u64 ignore2stf; + u64 tpid2; + /* P/Q/R/S only */ + u64 queue_ts; + u64 egrmirrvid; + u64 egrmirrpcp; + u64 egrmirrdei; + u64 replay_port; +}; + +struct sja1105_vlan_lookup_entry { + u64 ving_mirr; + u64 vegr_mirr; + u64 vmemb_port; + u64 vlan_bc; + u64 tag_port; + u64 vlanid; +}; + +struct sja1105_l2_lookup_entry { + u64 vlanid; + u64 macaddr; + u64 destports; + u64 enfport; + u64 index; +}; + +struct sja1105_l2_lookup_params_entry { + u64 maxage; /* Shared */ + u64 dyn_tbsz; /* E/T only */ + u64 poly; /* E/T only */ + u64 shared_learn; /* Shared */ + u64 no_enf_hostprt; /* Shared */ + u64 no_mgmt_learn; /* Shared */ +}; + +struct sja1105_l2_forwarding_entry { + u64 bc_domain; + u64 reach_port; + u64 fl_domain; + u64 vlan_pmap[8]; +}; + +struct sja1105_l2_forwarding_params_entry { + u64 max_dynp; + u64 part_spc[8]; +}; + +struct sja1105_l2_policing_entry { + u64 sharindx; + u64 smax; + u64 rate; + u64 maxlen; + u64 partition; +}; + +struct sja1105_mac_config_entry { + u64 top[8]; + u64 base[8]; + u64 enabled[8]; + u64 ifg; + u64 speed; + u64 tp_delin; + u64 tp_delout; + u64 maxage; + u64 vlanprio; + u64 vlanid; + u64 ing_mirr; + u64 egr_mirr; + u64 drpnona664; + u64 drpdtag; + u64 drpuntag; + u64 retag; + u64 dyn_learn; + u64 egress; + u64 ingress; +}; + +struct sja1105_xmii_params_entry { + u64 phy_mac[5]; + u64 xmii_mode[5]; +}; + +struct sja1105_table_header { + u64 block_id; + u64 len; + u64 crc; +}; + +struct sja1105_table_ops { + size_t (*packing)(void *buf, void *entry_ptr, enum packing_op op); + size_t unpacked_entry_size; + size_t packed_entry_size; + size_t max_entry_count; +}; + +struct sja1105_table { + const struct sja1105_table_ops *ops; + size_t entry_count; + void *entries; +}; + +struct sja1105_static_config { + u64 device_id; + struct sja1105_table tables[BLK_IDX_MAX]; +}; + +extern struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX]; + +size_t sja1105_table_header_packing(void *buf, void *hdr, enum packing_op op); +void +sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr); +size_t +sja1105_static_config_get_length(const struct sja1105_static_config *config); + +typedef enum { + SJA1105_CONFIG_OK = 0, + SJA1105_MISSING_L2_POLICING_TABLE, + SJA1105_MISSING_L2_FORWARDING_TABLE, + SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE, + SJA1105_MISSING_GENERAL_PARAMS_TABLE, + SJA1105_MISSING_VLAN_TABLE, + SJA1105_MISSING_XMII_TABLE, + SJA1105_MISSING_MAC_TABLE, + SJA1105_OVERCOMMITTED_FRAME_MEMORY, +} sja1105_config_valid_t; + +extern const char *sja1105_static_config_error_msg[]; + +sja1105_config_valid_t +sja1105_static_config_check_valid(const struct sja1105_static_config *config); +void +sja1105_static_config_pack(void *buf, struct sja1105_static_config *config); +int sja1105_static_config_init(struct sja1105_static_config *config, + const struct sja1105_table_ops *static_ops, + u64 device_id); +void sja1105_static_config_free(struct sja1105_static_config *config); + +u32 sja1105_crc32(const void *buf, size_t len); + +void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len); +void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len); +void sja1105_packing(void *buf, u64 *val, int start, int end, + size_t len, enum packing_op op); + +#endif + diff --git a/include/linux/dsa/sja1105.h b/include/linux/dsa/sja1105.h new file mode 100644 index 000000000000..30559d1d0e1b --- /dev/null +++ b/include/linux/dsa/sja1105.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2019, Vladimir Oltean + */ + +/* Included by drivers/net/dsa/sja1105/sja1105.h */ + +#ifndef _NET_DSA_SJA1105_H +#define _NET_DSA_SJA1105_H + +/* The switch can only be convinced to stay in unmanaged mode and not trap any + * link-local traffic by actually telling it to filter frames sent at the + * 00:00:00:00:00:00 destination MAC. + */ +#define SJA1105_LINKLOCAL_FILTER_A 0x000000000000ull +#define SJA1105_LINKLOCAL_FILTER_A_MASK 0xFFFFFFFFFFFFull +#define SJA1105_LINKLOCAL_FILTER_B 0x000000000000ull +#define SJA1105_LINKLOCAL_FILTER_B_MASK 0xFFFFFFFFFFFFull + +#endif /* _NET_DSA_SJA1105_H */ From patchwork Mon Apr 29 00:16:57 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092382 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="E9tidZNr"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44sldx0jgSz9s7T for ; Mon, 29 Apr 2019 10:19:33 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727399AbfD2AT2 (ORCPT ); Sun, 28 Apr 2019 20:19:28 -0400 Received: from mail-wr1-f65.google.com ([209.85.221.65]:34106 "EHLO mail-wr1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726223AbfD2ASI (ORCPT ); Sun, 28 Apr 2019 20:18:08 -0400 Received: by mail-wr1-f65.google.com with SMTP id v16so10858355wrp.1; Sun, 28 Apr 2019 17:18:06 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=RdbNxYZCMR3opS5rAF8WCgb0djFF5MQPNZ+HCOdP7Fw=; b=E9tidZNrxe4NS8MJDsIZzzaK3K87vOIkcgifsNqCgsf0hx7HGd3xWRdmZSQMmoh9WH G6o0yqEisAqNWabXKuuYR1FH+htmRS908NXeyA9klemFmR1Zx3uhcZ5vIopg4BgQ+NUo 08nEiGIO6CS/Hk8NzQiYZeu6kIq+V/WwSVOWJ7iIZVXY5wCoru1PvDdzRTd8WyeFfnCv 8stOL6qaD/1uBAoPiW4XW2VKu5M5hc2amcemqUn/nN8kcGwbgvlm3824JqLX39wBWe87 Gh6vw3bVB3DdksTQtZiEcwczALggqKCdBZ4d0nI44a1jM0btv4ESuh56ZM7RfhFcnMld 1owg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=RdbNxYZCMR3opS5rAF8WCgb0djFF5MQPNZ+HCOdP7Fw=; b=agKMvcm9QZJsFwoW41ovKPCPrYTW1kg+V0GCry5+/MOc6OnGnu2fsutTleqLTgpHRW jTwrDrwNknZt286HJ5wtfhyoaP9QJguWrXZXaUGelXK79ByjhGtTqLLOZCGLUAUBtP6s L4jKBLoqU8NqT0xvTlwNK8UXfFmgBdn2MZInX+GFQ+QH+01kV4EID9T9/8NmiBw+UTZ3 EKa4YWBRRtuEhLSM5XnEK30cpqsacks+uCgILCFX+EcFpu+JYG7/cZuePsoDutE4p1rm Jd350hmmMeSfS0pZK803PIkLuERdf5l8ITsiw+tCT9OitD1MfgYYR7ga4hpUO4MzF+lm L7Mg== X-Gm-Message-State: APjAAAVyGRPe6EZQMBjjwP4EN3g7rTZS79gTK9w8yloaBrN8L4SPv6sz Ja57mBShvas56ZWFqk95Kok= X-Google-Smtp-Source: APXvYqxfm5xcl2Tc8+Bq6+qEnBgoDtagRtFv1BMtslrMXkxbCV8446CVa4p+4FFNv7hHzZ2tG40aJA== X-Received: by 2002:a05:6000:1192:: with SMTP id g18mr11027752wrx.253.1556497085019; Sun, 28 Apr 2019 17:18:05 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.04 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:04 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 03/12] net: dsa: sja1105: Add support for FDB and MDB management Date: Mon, 29 Apr 2019 03:16:57 +0300 Message-Id: <20190429001706.7449-4-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Currently only the (more difficult) first generation E/T series is supported. Here the TCAM is only 4-way associative, and to know where the hardware will search for a FDB entry, we need to perform the same hash algorithm in order to install the entry in the correct bin. On P/Q/R/S, the TCAM should be fully associative. However the SPI command interface is different, and because I don't have access to a new-generation device at the moment, support for it is TODO. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli --- Changes from v4: Added prefix to crc8_add function name, renamed "index_in_bin" into "way", got rid of #undef, turned macros into functions. Changes from v3: None Changes from v2: None drivers/net/dsa/sja1105/sja1105.h | 2 + .../net/dsa/sja1105/sja1105_dynamic_config.c | 44 ++++ drivers/net/dsa/sja1105/sja1105_main.c | 194 ++++++++++++++++++ 3 files changed, 240 insertions(+) diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index 40d7efe2e01a..1474830f963c 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -123,6 +123,8 @@ int sja1105_dynamic_config_write(struct sja1105_private *priv, enum sja1105_blk_idx blk_idx, int index, void *entry, bool keep); +u8 sja1105_fdb_hash(struct sja1105_private *priv, const u8 *addr, u16 vid); + /* Common implementations for the static and dynamic configs */ size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, enum packing_op op); diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c index d8f145488063..6df521542378 100644 --- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c @@ -487,3 +487,47 @@ int sja1105_dynamic_config_write(struct sja1105_private *priv, return 0; } + +static u8 sja1105_crc8_add(u8 crc, u8 byte, u8 poly) +{ + int i; + + for (i = 0; i < 8; i++) { + if ((crc ^ byte) & (1 << 7)) { + crc <<= 1; + crc ^= poly; + } else { + crc <<= 1; + } + byte <<= 1; + } + return crc; +} + +/* CRC8 algorithm with non-reversed input, non-reversed output, + * no input xor and no output xor. Code customized for receiving + * the SJA1105 E/T FDB keys (vlanid, macaddr) as input. CRC polynomial + * is also received as argument in the Koopman notation that the switch + * hardware stores it in. + */ +u8 sja1105_fdb_hash(struct sja1105_private *priv, const u8 *addr, u16 vid) +{ + struct sja1105_l2_lookup_params_entry *l2_lookup_params = + priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS].entries; + u64 poly_koopman = l2_lookup_params->poly; + /* Convert polynomial from Koopman to 'normal' notation */ + u8 poly = (u8)(1 + (poly_koopman << 1)); + u64 vlanid = l2_lookup_params->shared_learn ? 0 : vid; + u64 input = (vlanid << 48) | ether_addr_to_u64(addr); + u8 crc = 0; /* seed */ + int i; + + /* Mask the eight bytes starting from MSB one at a time */ + for (i = 56; i >= 0; i -= 8) { + u8 byte = (input & (0xffull << i)) >> i; + + crc = sja1105_crc8_add(crc, byte, poly); + } + return crc; +} + diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 7d2ad2db0d88..ec8137eff223 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -179,6 +179,9 @@ static int sja1105_init_static_fdb(struct sja1105_private *priv) table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + /* We only populate the FDB table through dynamic + * L2 Address Lookup entries + */ if (table->entry_count) { kfree(table->entries); table->entry_count = 0; @@ -689,6 +692,191 @@ static void sja1105_adjust_link(struct dsa_switch *ds, int port, sja1105_adjust_port_config(priv, port, phydev->speed, true); } +/* First-generation switches have a 4-way set associative TCAM that + * holds the FDB entries. An FDB index spans from 0 to 1023 and is comprised of + * a "bin" (grouping of 4 entries) and a "way" (an entry within a bin). + * For the placement of a newly learnt FDB entry, the switch selects the bin + * based on a hash function, and the way within that bin incrementally. + */ +static inline int sja1105et_fdb_index(int bin, int way) +{ + return bin * SJA1105ET_FDB_BIN_SIZE + way; +} + +static int sja1105_is_fdb_entry_in_bin(struct sja1105_private *priv, int bin, + const u8 *addr, u16 vid, + struct sja1105_l2_lookup_entry *match, + int *last_unused) +{ + int way; + + for (way = 0; way < SJA1105ET_FDB_BIN_SIZE; way++) { + struct sja1105_l2_lookup_entry l2_lookup = {0}; + int index = sja1105et_fdb_index(bin, way); + + /* Skip unused entries, optionally marking them + * into the return value + */ + if (sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + index, &l2_lookup)) { + if (last_unused) + *last_unused = way; + continue; + } + + if (l2_lookup.macaddr == ether_addr_to_u64(addr) && + l2_lookup.vlanid == vid) { + if (match) + *match = l2_lookup; + return way; + } + } + /* Return an invalid entry index if not found */ + return -1; +} + +static int sja1105_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_private *priv = ds->priv; + struct device *dev = ds->dev; + int last_unused = -1; + int bin, way; + + bin = sja1105_fdb_hash(priv, addr, vid); + + way = sja1105_is_fdb_entry_in_bin(priv, bin, addr, vid, + &l2_lookup, &last_unused); + if (way >= 0) { + /* We have an FDB entry. Is our port in the destination + * mask? If yes, we need to do nothing. If not, we need + * to rewrite the entry by adding this port to it. + */ + if (l2_lookup.destports & BIT(port)) + return 0; + l2_lookup.destports |= BIT(port); + } else { + int index = sja1105et_fdb_index(bin, way); + + /* We don't have an FDB entry. We construct a new one and + * try to find a place for it within the FDB table. + */ + l2_lookup.macaddr = ether_addr_to_u64(addr); + l2_lookup.destports = BIT(port); + l2_lookup.vlanid = vid; + + if (last_unused >= 0) { + way = last_unused; + } else { + /* Bin is full, need to evict somebody. + * Choose victim at random. If you get these messages + * often, you may need to consider changing the + * distribution function: + * static_config[BLK_IDX_L2_LOOKUP_PARAMS].entries->poly + */ + get_random_bytes(&way, sizeof(u8)); + way %= SJA1105ET_FDB_BIN_SIZE; + dev_warn(dev, "Warning, FDB bin %d full while adding entry for %pM. Evicting entry %u.\n", + bin, addr, way); + /* Evict entry */ + sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + index, NULL, false); + } + } + l2_lookup.index = sja1105et_fdb_index(bin, way); + + return sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + l2_lookup.index, &l2_lookup, + true); +} + +static int sja1105_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid) +{ + struct sja1105_l2_lookup_entry l2_lookup = {0}; + struct sja1105_private *priv = ds->priv; + int index, bin, way; + bool keep; + + bin = sja1105_fdb_hash(priv, addr, vid); + way = sja1105_is_fdb_entry_in_bin(priv, bin, addr, vid, + &l2_lookup, NULL); + if (way < 0) + return 0; + index = sja1105et_fdb_index(bin, way); + + /* We have an FDB entry. Is our port in the destination mask? If yes, + * we need to remove it. If the resulting port mask becomes empty, we + * need to completely evict the FDB entry. + * Otherwise we just write it back. + */ + if (l2_lookup.destports & BIT(port)) + l2_lookup.destports &= ~BIT(port); + if (l2_lookup.destports) + keep = true; + else + keep = false; + + return sja1105_dynamic_config_write(priv, BLK_IDX_L2_LOOKUP, + index, &l2_lookup, keep); +} + +static int sja1105_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct sja1105_private *priv = ds->priv; + struct device *dev = ds->dev; + int i; + + for (i = 0; i < SJA1105_MAX_L2_LOOKUP_COUNT; i++) { + struct sja1105_l2_lookup_entry l2_lookup = {0}; + u8 macaddr[ETH_ALEN]; + int rc; + + rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, + i, &l2_lookup); + /* No fdb entry at i, not an issue */ + if (rc == -EINVAL) + continue; + if (rc) { + dev_err(dev, "Failed to dump FDB: %d\n", rc); + return rc; + } + + /* FDB dump callback is per port. This means we have to + * disregard a valid entry if it's not for this port, even if + * only to revisit it later. This is inefficient because the + * 1024-sized FDB table needs to be traversed 4 times through + * SPI during a 'bridge fdb show' command. + */ + if (!(l2_lookup.destports & BIT(port))) + continue; + u64_to_ether_addr(l2_lookup.macaddr, macaddr); + cb(macaddr, l2_lookup.vlanid, false, data); + } + return 0; +} + +/* This callback needs to be present */ +static int sja1105_mdb_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) +{ + return 0; +} + +static void sja1105_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) +{ + sja1105_fdb_add(ds, port, mdb->addr, mdb->vid); +} + +static int sja1105_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb) +{ + return sja1105_fdb_del(ds, port, mdb->addr, mdb->vid); +} + static int sja1105_bridge_member(struct dsa_switch *ds, int port, struct net_device *br, bool member) { @@ -791,8 +979,14 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .get_tag_protocol = sja1105_get_tag_protocol, .setup = sja1105_setup, .adjust_link = sja1105_adjust_link, + .port_fdb_dump = sja1105_fdb_dump, + .port_fdb_add = sja1105_fdb_add, + .port_fdb_del = sja1105_fdb_del, .port_bridge_join = sja1105_bridge_join, .port_bridge_leave = sja1105_bridge_leave, + .port_mdb_prepare = sja1105_mdb_prepare, + .port_mdb_add = sja1105_mdb_add, + .port_mdb_del = sja1105_mdb_del, }; static int sja1105_check_device_id(struct sja1105_private *priv) From patchwork Mon Apr 29 00:16:58 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092381 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="HTMcXbpd"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44sldn1NrLz9s9G for ; Mon, 29 Apr 2019 10:19:25 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727381AbfD2ATU (ORCPT ); Sun, 28 Apr 2019 20:19:20 -0400 Received: from mail-wr1-f66.google.com ([209.85.221.66]:35284 "EHLO mail-wr1-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726947AbfD2ASI (ORCPT ); Sun, 28 Apr 2019 20:18:08 -0400 Received: by mail-wr1-f66.google.com with SMTP id f7so4757058wrs.2; Sun, 28 Apr 2019 17:18:06 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=vdk6ZBOaWszZ50TtlSt6J4H6EMvkGFup8AOOdK5qlqM=; b=HTMcXbpd9D2kbfao40XYz1GlTbRyF2Vrp9mb4YOORK5tZm3DXwb1wCUvcABBjIOGPu 89hdLOGOaEXsND24HLU5HkGakbQhtYaxgSYXrfDLDVN6cYAqDnZ4Z2YVC3d7cwj2cdOA HFLv+UnCVmWDTe6QMrZbCL8tI0BiHMw39ispqF4UGG+STxmvEWNKUuBmX0e4R5oRv9aF Qx0pqG7meJfQ5zW85MCvhYfDaMpbVDEAtyfYdd4FBG9ZnXE/zjtPU5FoKQjl4TNQi9AT zRnhjQwWMhluFBg+YH7ajev3Ut9tC0LmZ1Qs6HNUBLXZLQTXWqaiT/Mbkc26MN7+7adN mZMQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=vdk6ZBOaWszZ50TtlSt6J4H6EMvkGFup8AOOdK5qlqM=; b=Diz4CMjEDlehtH/xV0uWacMOJ/+iiykLIViYagoTlRLddGddD9BthORDjLsnyzBe9K XIsCN9ykZab7e2jr7Pf3kIDEXjk4L8uNKWUc7s8iie4AJzCraWdWUVpILkQjOeXMRru8 ezEoulfJLQdFzPNJuxSfs1IImtkR7qmHmE4QCRVXK1e89KZHxE4nEQjtwRJcuXSzrtAL pYbrDE/h/vJSYlDqutiLkBFDXnz+bnVyaFhSsrCDC0tEKFDCt8l9vfmlzxIU5NMzFdqv wIR0zUTM2+1CCK/ejeUH2sT8gWPT11J2G27uPhK+O9skFL3cnquzwxAJsqmSHkVy+kaF FjWw== X-Gm-Message-State: APjAAAUB0PYGa6RW5A8K3KZOx8kPtCJToxt2RIRhTNbiD1f25sjdoxMS VKyK40vdO9CkogIOuDVRPfYfx76MVzw= X-Google-Smtp-Source: APXvYqzptqG54cW25XserV3jnXBT/hryXFsnLTyQgNOvlNO3BPDvenWhWGODz4n3vnb6ifaKWVAC7Q== X-Received: by 2002:a5d:508f:: with SMTP id a15mr7270989wrt.273.1556497086125; Sun, 28 Apr 2019 17:18:06 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.05 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:05 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 04/12] net: dsa: sja1105: Error out if RGMII delays are requested in DT Date: Mon, 29 Apr 2019 03:16:58 +0300 Message-Id: <20190429001706.7449-5-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Documentation/devicetree/bindings/net/ethernet.txt is confusing because it says what the MAC should not do, but not what it *should* do: * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC should not add an RX delay in this case) The gap in semantics is threefold: 1. Is it illegal for the MAC to apply the Rx internal delay by itself, and simplify the phy_mode (mask off "rgmii-rxid" into "rgmii") before passing it to of_phy_connect? The documentation would suggest yes. 1. For "rgmii-rxid", while the situation with the Rx clock skew is more or less clear (needs to be added by the PHY), what should the MAC driver do about the Tx delays? Is it an implicit wild card for the MAC to apply delays in the Tx direction if it can? What if those were already added as serpentine PCB traces, how could that be made more obvious through DT bindings so that the MAC doesn't attempt to add them twice and again potentially break the link? 3. If the interface is a fixed-link and therefore the PHY object is fixed (a purely software entity that obviously cannot add clock skew), what is the meaning of the above property? So an interpretation of the RGMII bindings was chosen that hopefully does not contradict their intention but also makes them more applied. The SJA1105 driver understands to act upon "rgmii-*id" phy-mode bindings if the port is in the PHY role (either explicitly, or if it is a fixed-link). Otherwise it always passes the duty of setting up delays to the PHY driver. The error behavior that this patch adds is required on SJA1105E/T where the MAC really cannot apply internal delays. If the other end of the fixed-link cannot apply RGMII delays either (this would be specified through its own DT bindings), then the situation requires PCB delays. For SJA1105P/Q/R/S, this is however hardware supported and the error is thus only temporary. I created a stub function pointer for configuring delays per-port on RXC and TXC, and will implement it when I have access to a board with this hardware setup. Meanwhile do not allow the user to select an invalid configuration. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn --- Changes in v4: Moved RGMII delay settings to an array in sja1105_private. The sja1105_port structure will be used to share info with the tagger (in a future patchset), and RGMII delays are not an example of that. Not setting to NULL function pointers that don't need to. Changes in v3: None. Changes in v2: Patch is new. drivers/net/dsa/sja1105/sja1105.h | 3 ++ drivers/net/dsa/sja1105/sja1105_clocking.c | 5 +++- drivers/net/dsa/sja1105/sja1105_main.c | 34 ++++++++++++++++++++++ 3 files changed, 41 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index 1474830f963c..5c0bd62c9e74 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -48,11 +48,14 @@ struct sja1105_info { const struct sja1105_table_ops *static_ops; const struct sja1105_regs *regs; int (*reset_cmd)(const void *ctx, const void *data); + int (*setup_rgmii_delay)(const void *ctx, int port); const char *name; }; struct sja1105_private { struct sja1105_static_config static_config; + bool rgmii_rx_delay[SJA1105_NUM_PORTS]; + bool rgmii_tx_delay[SJA1105_NUM_PORTS]; const struct sja1105_info *info; struct gpio_desc *reset_gpio; struct spi_device *spidev; diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c index dd20670fff65..01ff395f2893 100644 --- a/drivers/net/dsa/sja1105/sja1105_clocking.c +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -427,7 +427,10 @@ static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port) dev_err(dev, "Failed to configure Tx pad registers\n"); return rc; } - return 0; + if (!priv->info->setup_rgmii_delay) + return 0; + + return priv->info->setup_rgmii_delay(priv, port); } static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv, diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index ec8137eff223..d27b9c178cba 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -518,6 +518,30 @@ static int sja1105_static_config_load(struct sja1105_private *priv, return sja1105_static_config_upload(priv); } +static int sja1105_parse_rgmii_delays(struct sja1105_private *priv, + const struct sja1105_dt_port *ports) +{ + int i; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + if (ports->role == XMII_MAC) + continue; + + if (ports->phy_mode == PHY_INTERFACE_MODE_RGMII_RXID || + ports->phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + priv->rgmii_rx_delay[i] = true; + + if (ports->phy_mode == PHY_INTERFACE_MODE_RGMII_TXID || + ports->phy_mode == PHY_INTERFACE_MODE_RGMII_ID) + priv->rgmii_tx_delay[i] = true; + + if ((priv->rgmii_rx_delay[i] || priv->rgmii_tx_delay[i]) && + !priv->info->setup_rgmii_delay) + return -EINVAL; + } + return 0; +} + static int sja1105_parse_ports_node(struct sja1105_private *priv, struct sja1105_dt_port *ports, struct device_node *ports_node) @@ -959,6 +983,16 @@ static int sja1105_setup(struct dsa_switch *ds) dev_err(ds->dev, "Failed to parse DT: %d\n", rc); return rc; } + + /* Error out early if internal delays are required through DT + * and we can't apply them. + */ + rc = sja1105_parse_rgmii_delays(priv, ports); + if (rc < 0) { + dev_err(ds->dev, "RGMII delay not supported\n"); + return rc; + } + /* Create and send configuration down to device */ rc = sja1105_static_config_load(priv, ports); if (rc < 0) { From patchwork Mon Apr 29 00:16:59 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092380 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="JRm771NI"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44sldb0hbTz9s6w for ; Mon, 29 Apr 2019 10:19:15 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727072AbfD2ASK (ORCPT ); Sun, 28 Apr 2019 20:18:10 -0400 Received: from mail-wm1-f67.google.com ([209.85.128.67]:55127 "EHLO mail-wm1-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726955AbfD2ASI (ORCPT ); Sun, 28 Apr 2019 20:18:08 -0400 Received: by mail-wm1-f67.google.com with SMTP id c1so11497702wml.4; Sun, 28 Apr 2019 17:18:07 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=xi/bqu+5Yj87FAza0D0zWehDcDcznhOhDhCyw5UfAcM=; b=JRm771NI98FkW4KICvl5H+ru9SRLqSjtBvFZgwIn4oSD8t0XWEXwaARs+8Ig2xLgEI K9YORU+p2rAbor0U6vI5uLKlAugD/0kSXAbU8nWmp8ygkYfGqiDB/NfngxaKwZSDbJSj qxlkNhdACnkyjAwlcGVbsohkqfwln8PqFrmB+sYrHD9CPeHoUyCAVseNzBWUK/lafCv0 FldVnkXEkO81YZeh7uRfc++DchrqAnZlJmW9wbcJbiIakz/nIXPWAFRpWYN7bvhMceub md65w3Ho4GJTOTo3efhUkgAujf50+WbWogdIixCVWoP3nu1WfX1yR/92i9uRQ1gXOeX8 b6lA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=xi/bqu+5Yj87FAza0D0zWehDcDcznhOhDhCyw5UfAcM=; b=gxxsfTT5M7MmYVoIsCNv0ZKSkHrENzmhrJJGnFJbV1EoxnZe9puqGHQUvfRY4v+58K PtEUbSR73pZHHE3qyMX8oVqW74HU7NeEgoj7TA9VSL7pZYrZfgWvS01H8CFzY4nvMGVy pk+3gZBWkmv7LytdK/v3+A0iK+Wcyf02FoKHbVt5g9JaQpC0/8mmlE2FQTdhIt+JYFVW vLMvQX7shuxY0Nvl+IUakMphWS+Ji6s8yhOHIl6DnHMTUQ2aJ9+TyDgQmcCCrbw2Gbq9 plBAdxCDbdIq5C6w9RDM+OIgivSQ0lJM4E+p4C7pFU6IOGSGQpbOx6+36caI9S3X2K75 XMoQ== X-Gm-Message-State: APjAAAWMb2TVqvedVtXVrqCfsmDLUvJQ2WYMECCWWRccP8vay7BjI/+M FpYy25IsctUiYmZwPin3p/c= X-Google-Smtp-Source: APXvYqwehGA+MF4l1p9Lf1Fa8NxbRxxm9qQhqsraNfVZ85lrkoMTpOgFCDY3qQTg4P3aSIKJ+z1EPA== X-Received: by 2002:a7b:c3da:: with SMTP id t26mr5724574wmj.40.1556497087036; Sun, 28 Apr 2019 17:18:07 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.06 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:06 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 05/12] ether: Add dedicated Ethertype for pseudo-802.1Q DSA tagging Date: Mon, 29 Apr 2019 03:16:59 +0300 Message-Id: <20190429001706.7449-6-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org There are two possible utilizations so far: - Switch devices that don't support a native insertion/extraction header on the CPU port may still enjoy the benefits of port isolation with a custom VLAN tag. For this, they need to have a customizable TPID in hardware and a new Ethertype to distinguish between real 802.1Q traffic and the private tags used for port separation. - Switches that don't support the deactivation of VLAN awareness, but still want to have a mode in which they accept all traffic, including frames that are tagged with a VLAN not configured on their ports, may use this as a fake to trick the hardware into thinking that the TPID for VLAN is something other than 0x8100. What follows after the ETH_P_DSA_8021Q EtherType is a regular VLAN header (TCI), however there is no other EtherType that can be used for this purpose and doesn't already have a well-defined meaning. ETH_P_8021AD, ETH_P_QINQ1, ETH_P_QINQ2 and ETH_P_QINQ3 expect that another follow-up VLAN tag is present, which is not the case here. Signed-off-by: Vladimir Oltean Suggested-by: Andrew Lunn Reviewed-by: Andrew Lunn --- Changes in v4: Patch was reintroduced at Andrew's request. Changes in v3: Patch was removed. Changes in v2: Patch is new. include/uapi/linux/if_ether.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 3a45b4ad71a3..3158ba672b72 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -109,6 +109,7 @@ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DSA_8021Q 0xDADB /* Fake VLAN Header for DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ #define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ From patchwork Mon Apr 29 00:17:00 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092374 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="jwk9K+y4"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44slcm547fz9s7T for ; Mon, 29 Apr 2019 10:18:32 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727168AbfD2ASO (ORCPT ); Sun, 28 Apr 2019 20:18:14 -0400 Received: from mail-wm1-f68.google.com ([209.85.128.68]:39390 "EHLO mail-wm1-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727002AbfD2ASK (ORCPT ); Sun, 28 Apr 2019 20:18:10 -0400 Received: by mail-wm1-f68.google.com with SMTP id n25so13037112wmk.4; Sun, 28 Apr 2019 17:18:08 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=+eersz3zJmwXA8V/RwS/Yl+b/0CWGULML0fK10Qbeuw=; b=jwk9K+y4krivADKFWqKnfxJwyFJbiomWoH8NVbJkCUMSZ5Ckn0RuK1dOftOQTsh4Uh zMYd4rc6udgFZZcGVa0Cds9FwAxGhU9e9F5Wfr1o9grwdnZ9x6VWXbD2gIsn0FUsgdzl zKeMTs5qC8Ur6sngzLCNpAdaHaTqVzjGbhTo9TH9xMFBSInyGpgQkoFC/qEsxFvF9+HS TLECWAinfMvfCptLmICBuJ7gobMqA+K5z3VIc3HckrRaNXTVrhZUjWAgEHEl6ruA5Uct TIg2HM4dYE7X156yUwOUo9YrvYn5mHpdpm60AYy1TnkR1m1qdcukONND1h9qIon2CNLP KQLg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=+eersz3zJmwXA8V/RwS/Yl+b/0CWGULML0fK10Qbeuw=; b=j5KU+hQ3yWSu6hTbIIlJmGhZh+NI6Lc+OMwGhcCbxGAUe9TnUo8Laxfq0R5a/FzxNY XVHNs/Z/mtCQcMm975WFW95F8WB50qMJwnD31znS0nKGYOSjY/5/YUHEG6svNVWTDRg/ DNKZsNjp3kHDKrIZQpFxdghfuKtgzzXvmVvUFsZaLQV1bF2lDGGJRU9CpBABIxWMfZ1y NNobejQyQm6k0J291168ZsC9f6peHbJE93Zwcbc7hDAgECdgGxDsmoKAPL4yttKHPkbZ Ko8Z56TjbT/KfXXLJVwe3AJZi9HEoIurFXrxxdqLUkk6CdYslqzS488pkBb4vj53uYW2 lZRQ== X-Gm-Message-State: APjAAAV13S9Nh41h4F8OeL2vMIeglJKJfUKGpaRy2+y7TVWIqvKoF64c yA29blH2gViZLmnjkOoAUOSWqNQKy4Y= X-Google-Smtp-Source: APXvYqxt4KIbD4nXaIUYfY9Fy8QiZqkPH3eHNaqTU5wNEXO65avsSnxdfBHJth88Z4lnKVeU7fbp0w== X-Received: by 2002:a1c:6c19:: with SMTP id h25mr14964311wmc.119.1556497087945; Sun, 28 Apr 2019 17:18:07 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.07 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:07 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 06/12] net: dsa: sja1105: Add support for VLAN operations Date: Mon, 29 Apr 2019 03:17:00 +0300 Message-Id: <20190429001706.7449-7-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org VLAN filtering cannot be properly disabled in SJA1105. So in order to emulate the "no VLAN awareness" behavior (not dropping traffic that is tagged with a VID that isn't configured on the port), we need to hack another switch feature: programmable TPID (which is 0x8100 for 802.1Q). We are reprogramming the TPID to a bogus value which leaves the switch thinking that all traffic is untagged, and therefore accepts it. Under a vlan_filtering bridge, the proper TPID of ETH_P_8021Q is installed again, and the switch starts identifying 802.1Q-tagged traffic. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli --- Changes from v4: Changed back to ETH_P_DSA_8021Q (hidden behind the ETH_P_SJA1105 macro definition). Simplified handling of .port_vlan_filtering due to the recent extra patches on DSA core. Changes from v3: Changed back to ETH_P_EDSA. Changes from v2: Changed the TPID from ETH_P_EDSA (0xDADA) to a newly introduced one: ETH_P_DSA_8021Q (0xDADB). drivers/net/dsa/sja1105/sja1105_main.c | 248 +++++++++++++++++- .../net/dsa/sja1105/sja1105_static_config.c | 38 +++ .../net/dsa/sja1105/sja1105_static_config.h | 3 + include/linux/dsa/sja1105.h | 4 + 4 files changed, 291 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index d27b9c178cba..f7b1525b388a 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -251,6 +251,13 @@ static int sja1105_init_static_vlan(struct sja1105_private *priv) table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; /* The static VLAN table will only contain the initial pvid of 0. + * All other VLANs are to be configured through dynamic entries, + * and kept in the static configuration table as backing memory. + * The pvid of 0 is sufficient to pass traffic while the ports are + * standalone and when vlan_filtering is disabled. When filtering + * gets enabled, the switchdev core sets up the VLAN ID 1 and sets + * it as the new pvid. Actually 'pvid 1' still comes up in 'bridge + * vlan' even when vlan_filtering is off, but it has no effect. */ if (table->entry_count) { kfree(table->entries); @@ -391,8 +398,11 @@ static int sja1105_init_general_params(struct sja1105_private *priv) .vlmask = 0, /* Only update correctionField for 1-step PTP (L2 transport) */ .ignore2stf = 0, - .tpid = ETH_P_8021Q, - .tpid2 = ETH_P_8021Q, + /* Forcefully disable VLAN filtering by telling + * the switch that VLAN has a different EtherType. + */ + .tpid = ETH_P_SJA1105, + .tpid2 = ETH_P_SJA1105, }; struct sja1105_table *table; int i; @@ -954,12 +964,233 @@ static void sja1105_bridge_leave(struct dsa_switch *ds, int port, sja1105_bridge_member(ds, port, br, false); } +/* For situations where we need to change a setting at runtime that is only + * available through the static configuration, resetting the switch in order + * to upload the new static config is unavoidable. Back up the settings we + * modify at runtime (currently only MAC) and restore them after uploading, + * such that this operation is relatively seamless. + */ +static int sja1105_static_config_reload(struct sja1105_private *priv) +{ + struct sja1105_mac_config_entry *mac; + int speed_mbps[SJA1105_NUM_PORTS]; + int rc, i; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + /* Back up settings changed by sja1105_adjust_port_config and + * and restore their defaults. + */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + speed_mbps[i] = sja1105_speed[mac[i].speed]; + mac[i].speed = SJA1105_SPEED_AUTO; + } + + /* Reset switch and send updated static configuration */ + rc = sja1105_static_config_upload(priv); + if (rc < 0) + goto out; + + /* Configure the CGU (PLLs) for MII and RMII PHYs. + * For these interfaces there is no dynamic configuration + * needed, since PLLs have same settings at all speeds. + */ + rc = sja1105_clocking_setup(priv); + if (rc < 0) + goto out; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + bool enabled = (speed_mbps[i] != 0); + + rc = sja1105_adjust_port_config(priv, i, speed_mbps[i], + enabled); + if (rc < 0) + goto out; + } +out: + return rc; +} + +/* The TPID setting belongs to the General Parameters table, + * which can only be partially reconfigured at runtime (and not the TPID). + * So a switch reset is required. + */ +static int sja1105_change_tpid(struct sja1105_private *priv, + u16 tpid, u16 tpid2) +{ + struct sja1105_general_params_entry *general_params; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + general_params = table->entries; + general_params->tpid = tpid; + general_params->tpid2 = tpid2; + return sja1105_static_config_reload(priv); +} + +static int sja1105_pvid_apply(struct sja1105_private *priv, int port, u16 pvid) +{ + struct sja1105_mac_config_entry *mac; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + mac[port].vlanid = pvid; + + return sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, port, + &mac[port], true); +} + +static int sja1105_is_vlan_configured(struct sja1105_private *priv, u16 vid) +{ + struct sja1105_vlan_lookup_entry *vlan; + int count, i; + + vlan = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entries; + count = priv->static_config.tables[BLK_IDX_VLAN_LOOKUP].entry_count; + + for (i = 0; i < count; i++) + if (vlan[i].vlanid == vid) + return i; + + /* Return an invalid entry index if not found */ + return -1; +} + +static int sja1105_vlan_apply(struct sja1105_private *priv, int port, u16 vid, + bool enabled, bool untagged) +{ + struct sja1105_vlan_lookup_entry *vlan; + struct sja1105_table *table; + bool keep = true; + int match, rc; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + match = sja1105_is_vlan_configured(priv, vid); + if (match < 0) { + /* Can't delete a missing entry. */ + if (!enabled) + return 0; + rc = sja1105_table_resize(table, table->entry_count + 1); + if (rc) + return rc; + match = table->entry_count - 1; + } + /* Assign pointer after the resize (it's new memory) */ + vlan = table->entries; + vlan[match].vlanid = vid; + if (enabled) { + vlan[match].vlan_bc |= BIT(port); + vlan[match].vmemb_port |= BIT(port); + } else { + vlan[match].vlan_bc &= ~BIT(port); + vlan[match].vmemb_port &= ~BIT(port); + } + /* Also unset tag_port if removing this VLAN was requested, + * just so we don't have a confusing bitmap (no practical purpose). + */ + if (untagged || !enabled) + vlan[match].tag_port &= ~BIT(port); + else + vlan[match].tag_port |= BIT(port); + /* If there's no port left as member of this VLAN, + * it's time for it to go. + */ + if (!vlan[match].vmemb_port) + keep = false; + + dev_dbg(priv->ds->dev, + "%s: port %d, vid %llu, broadcast domain 0x%llx, " + "port members 0x%llx, tagged ports 0x%llx, keep %d\n", + __func__, port, vlan[match].vlanid, vlan[match].vlan_bc, + vlan[match].vmemb_port, vlan[match].tag_port, keep); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_VLAN_LOOKUP, vid, + &vlan[match], keep); + if (rc < 0) + return rc; + + if (!keep) + return sja1105_table_delete_entry(table, match); + + return 0; +} + static enum dsa_tag_protocol sja1105_get_tag_protocol(struct dsa_switch *ds, int port) { return DSA_TAG_PROTO_NONE; } +/* This callback needs to be present */ +static int sja1105_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + return 0; +} + +static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled) +{ + struct sja1105_private *priv = ds->priv; + int rc; + + if (enabled) + /* Enable VLAN filtering. */ + rc = sja1105_change_tpid(priv, ETH_P_8021Q, ETH_P_8021AD); + else + /* Disable VLAN filtering. */ + rc = sja1105_change_tpid(priv, ETH_P_SJA1105, ETH_P_SJA1105); + if (rc) + dev_err(ds->dev, "Failed to change VLAN Ethertype\n"); + + return rc; +} + +static void sja1105_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct sja1105_private *priv = ds->priv; + u16 vid; + int rc; + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + rc = sja1105_vlan_apply(priv, port, vid, true, vlan->flags & + BRIDGE_VLAN_INFO_UNTAGGED); + if (rc < 0) { + dev_err(ds->dev, "Failed to add VLAN %d to port %d: %d\n", + vid, port, rc); + return; + } + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) { + rc = sja1105_pvid_apply(ds->priv, port, vid); + if (rc < 0) { + dev_err(ds->dev, "Failed to set pvid %d on port %d: %d\n", + vid, port, rc); + return; + } + } + } +} + +static int sja1105_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct sja1105_private *priv = ds->priv; + u16 vid; + int rc; + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { + rc = sja1105_vlan_apply(priv, port, vid, false, vlan->flags & + BRIDGE_VLAN_INFO_UNTAGGED); + if (rc < 0) { + dev_err(ds->dev, "Failed to remove VLAN %d from port %d: %d\n", + vid, port, rc); + return rc; + } + } + return 0; +} + /* The programming model for the SJA1105 switch is "all-at-once" via static * configuration tables. Some of these can be dynamically modified at runtime, * but not the xMII mode parameters table. @@ -1005,6 +1236,15 @@ static int sja1105_setup(struct dsa_switch *ds) dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc); return rc; } + /* On SJA1105, VLAN filtering per se is always enabled in hardware. + * The only thing we can do to disable it is lie about what the 802.1Q + * EtherType is. + * So it will still try to apply VLAN filtering, but all ingress + * traffic (except frames received with EtherType of ETH_P_SJA1105) + * will be internally tagged with a distorted VLAN header where the + * TPID is ETH_P_SJA1105, and the VLAN ID is the port pvid. + */ + ds->vlan_filtering_is_global = true; return 0; } @@ -1018,6 +1258,10 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .port_fdb_del = sja1105_fdb_del, .port_bridge_join = sja1105_bridge_join, .port_bridge_leave = sja1105_bridge_leave, + .port_vlan_prepare = sja1105_vlan_prepare, + .port_vlan_filtering = sja1105_vlan_filtering, + .port_vlan_add = sja1105_vlan_add, + .port_vlan_del = sja1105_vlan_del, .port_mdb_prepare = sja1105_mdb_prepare, .port_mdb_add = sja1105_mdb_add, .port_mdb_del = sja1105_mdb_del, diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c index 84e64729dd82..a34004af364b 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.c +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -948,3 +948,41 @@ void sja1105_static_config_free(struct sja1105_static_config *config) } } +int sja1105_table_delete_entry(struct sja1105_table *table, int i) +{ + size_t entry_size = table->ops->unpacked_entry_size; + u8 *entries = table->entries; + + if (i > table->entry_count) + return -ERANGE; + + memmove(entries + i * entry_size, entries + (i + 1) * entry_size, + (table->entry_count - i) * entry_size); + + table->entry_count--; + + return 0; +} + +/* No pointers to table->entries should be kept when this is called. */ +int sja1105_table_resize(struct sja1105_table *table, size_t new_count) +{ + size_t entry_size = table->ops->unpacked_entry_size; + void *new_entries, *old_entries = table->entries; + + if (new_count > table->ops->max_entry_count) + return -ERANGE; + + new_entries = kcalloc(new_count, entry_size, GFP_KERNEL); + if (!new_entries) + return -ENOMEM; + + memcpy(new_entries, old_entries, min(new_count, table->entry_count) * + entry_size); + + table->entries = new_entries; + table->entry_count = new_count; + kfree(old_entries); + return 0; +} + diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h index f4f6142c16ed..124540ddb2c9 100644 --- a/drivers/net/dsa/sja1105/sja1105_static_config.h +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -240,6 +240,9 @@ int sja1105_static_config_init(struct sja1105_static_config *config, u64 device_id); void sja1105_static_config_free(struct sja1105_static_config *config); +int sja1105_table_delete_entry(struct sja1105_table *table, int i); +int sja1105_table_resize(struct sja1105_table *table, size_t new_count); + u32 sja1105_crc32(const void *buf, size_t len); void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len); diff --git a/include/linux/dsa/sja1105.h b/include/linux/dsa/sja1105.h index 30559d1d0e1b..abf3977e34fd 100644 --- a/include/linux/dsa/sja1105.h +++ b/include/linux/dsa/sja1105.h @@ -7,6 +7,10 @@ #ifndef _NET_DSA_SJA1105_H #define _NET_DSA_SJA1105_H +#include + +#define ETH_P_SJA1105 ETH_P_DSA_8021Q + /* The switch can only be convinced to stay in unmanaged mode and not trap any * link-local traffic by actually telling it to filter frames sent at the * 00:00:00:00:00:00 destination MAC. From patchwork Mon Apr 29 00:17:01 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092376 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="rvzFYejJ"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44slcw3kblz9s7T for ; Mon, 29 Apr 2019 10:18:40 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727327AbfD2ASi (ORCPT ); Sun, 28 Apr 2019 20:18:38 -0400 Received: from mail-wm1-f68.google.com ([209.85.128.68]:50418 "EHLO mail-wm1-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727068AbfD2ASN (ORCPT ); Sun, 28 Apr 2019 20:18:13 -0400 Received: by mail-wm1-f68.google.com with SMTP id p21so9746843wmc.0; Sun, 28 Apr 2019 17:18:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=H+sg8toUHX+kYWWZvC7RvzbsqWGRLPYEJm80u+giWmw=; b=rvzFYejJ8zXcTklkmJMxDHl2MsALjB93CE9Na5G57Gb6cEOdME900dFJ22m60rsty5 SPaNmdOVxlvwEmUdNCkrI75tZNN6XYqnqiu2oHKM5OTLVJNH2+g/MeNqv2RLWwGLNU8h BJs4FnwROUHzfW2HH0TJ4I+ELY6QF8L9l8ptAbR8VIHsG8242qJvCbAl7kdSHWxDBCzB VHoH1uXsD38WxoYFoZfUPTdHletjplpGby/GPTuNozUWCx+/gee3bZJFx3vuqrd7gQnz fdIYOyWqtRFkywjBsG1/26mxOelGiclKlOo271aGeVJCfjgHP+qei9t1p/uC3pDojTVQ GKNA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=H+sg8toUHX+kYWWZvC7RvzbsqWGRLPYEJm80u+giWmw=; b=h/nXqyGcn/FUFGjvMt6nqk6qZGfHjGY/GSS48ViupOlzJXAgpwM8fpsh4eyQ/Vjz7s VzBq1+EzoOOlAkaCRGY7UNkDt3R5Fh9rRUgG0BpMreiza36QnlNpf/TeG6I2QTN7lZVC OPaXcmi/N/ojK0KTnzjPldNx4fv7W+0VIxtj80gtLNQytepJpVdKahn8G9ivwPK4Ci9f qQoyvh8oaWQeHDi/elZSSPiLSL/Rw625j5YufL2eUBgGQHYt0+WiEMuy0HPnHclllYo4 dmm3ZI7DbK7ZWbQMJ/kDLMfM5wWopuxVrCQjSs+3XSEyWO/VCpGO6LYi8POusvUZcqPp VGnw== X-Gm-Message-State: APjAAAVHMScSnkpIceLQqk7Uc97TYbkHzKjHdaJ/gmlbo11GWCHwmCvk H5mMIuX4qEIPWBD6MABt6bTByavzY6U= X-Google-Smtp-Source: APXvYqzOItnn1t97B/37Ksc+HndrHW4nEzosd0DLLm/RuoRM3OlCDWJVkXFeQCjmnKzDNFnmV751yQ== X-Received: by 2002:a1c:9942:: with SMTP id b63mr16032518wme.116.1556497088981; Sun, 28 Apr 2019 17:18:08 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.07 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:08 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 07/12] net: dsa: sja1105: Add support for ethtool port counters Date: Mon, 29 Apr 2019 03:17:01 +0300 Message-Id: <20190429001706.7449-8-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli --- Changes in v4: Replaced IS_ET and IS_PQRS macros with explicit device_id checking. Added SJA1105 prefix to macro names. Changes in v3: None. Changes in v2: None functional. Moved the IS_ET() and IS_PQRS() device identification macros here since they are not used in earlier patches. drivers/net/dsa/sja1105/Makefile | 1 + drivers/net/dsa/sja1105/sja1105.h | 7 +- drivers/net/dsa/sja1105/sja1105_ethtool.c | 418 ++++++++++++++++++++++ drivers/net/dsa/sja1105/sja1105_main.c | 3 + 4 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 drivers/net/dsa/sja1105/sja1105_ethtool.c diff --git a/drivers/net/dsa/sja1105/Makefile b/drivers/net/dsa/sja1105/Makefile index ed00840802f4..bb4404c79eb2 100644 --- a/drivers/net/dsa/sja1105/Makefile +++ b/drivers/net/dsa/sja1105/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_NET_DSA_SJA1105) += sja1105.o sja1105-objs := \ sja1105_spi.o \ sja1105_main.o \ + sja1105_ethtool.o \ sja1105_clocking.o \ sja1105_static_config.o \ sja1105_dynamic_config.o \ diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index 5c0bd62c9e74..f7195352d235 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -117,8 +117,13 @@ typedef enum { int sja1105_clocking_setup_port(struct sja1105_private *priv, int port); int sja1105_clocking_setup(struct sja1105_private *priv); -/* From sja1105_dynamic_config.c */ +/* From sja1105_ethtool.c */ +void sja1105_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data); +void sja1105_get_strings(struct dsa_switch *ds, int port, + u32 stringset, u8 *data); +int sja1105_get_sset_count(struct dsa_switch *ds, int port, int sset); +/* From sja1105_dynamic_config.c */ int sja1105_dynamic_config_read(struct sja1105_private *priv, enum sja1105_blk_idx blk_idx, int index, void *entry); diff --git a/drivers/net/dsa/sja1105/sja1105_ethtool.c b/drivers/net/dsa/sja1105/sja1105_ethtool.c new file mode 100644 index 000000000000..b743689fea06 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_ethtool.c @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018-2019, Vladimir Oltean + */ +#include "sja1105.h" + +#define SJA1105_SIZE_MAC_AREA (0x02 * 4) +#define SJA1105_SIZE_HL1_AREA (0x10 * 4) +#define SJA1105_SIZE_HL2_AREA (0x4 * 4) +#define SJA1105_SIZE_QLEVEL_AREA (0x8 * 4) /* 0x4 to 0xB */ + +struct sja1105_port_status_mac { + u64 n_runt; + u64 n_soferr; + u64 n_alignerr; + u64 n_miierr; + u64 typeerr; + u64 sizeerr; + u64 tctimeout; + u64 priorerr; + u64 nomaster; + u64 memov; + u64 memerr; + u64 invtyp; + u64 intcyov; + u64 domerr; + u64 pcfbagdrop; + u64 spcprior; + u64 ageprior; + u64 portdrop; + u64 lendrop; + u64 bagdrop; + u64 policeerr; + u64 drpnona664err; + u64 spcerr; + u64 agedrp; +}; + +struct sja1105_port_status_hl1 { + u64 n_n664err; + u64 n_vlanerr; + u64 n_unreleased; + u64 n_sizeerr; + u64 n_crcerr; + u64 n_vlnotfound; + u64 n_ctpolerr; + u64 n_polerr; + u64 n_rxfrmsh; + u64 n_rxfrm; + u64 n_rxbytesh; + u64 n_rxbyte; + u64 n_txfrmsh; + u64 n_txfrm; + u64 n_txbytesh; + u64 n_txbyte; +}; + +struct sja1105_port_status_hl2 { + u64 n_qfull; + u64 n_part_drop; + u64 n_egr_disabled; + u64 n_not_reach; + u64 qlevel_hwm[8]; /* Only for P/Q/R/S */ + u64 qlevel[8]; /* Only for P/Q/R/S */ +}; + +struct sja1105_port_status { + struct sja1105_port_status_mac mac; + struct sja1105_port_status_hl1 hl1; + struct sja1105_port_status_hl2 hl2; +}; + +static void +sja1105_port_status_mac_unpack(void *buf, + struct sja1105_port_status_mac *status) +{ + /* Make pointer arithmetic work on 4 bytes */ + u32 *p = buf; + + sja1105_unpack(p + 0x0, &status->n_runt, 31, 24, 4); + sja1105_unpack(p + 0x0, &status->n_soferr, 23, 16, 4); + sja1105_unpack(p + 0x0, &status->n_alignerr, 15, 8, 4); + sja1105_unpack(p + 0x0, &status->n_miierr, 7, 0, 4); + sja1105_unpack(p + 0x1, &status->typeerr, 27, 27, 4); + sja1105_unpack(p + 0x1, &status->sizeerr, 26, 26, 4); + sja1105_unpack(p + 0x1, &status->tctimeout, 25, 25, 4); + sja1105_unpack(p + 0x1, &status->priorerr, 24, 24, 4); + sja1105_unpack(p + 0x1, &status->nomaster, 23, 23, 4); + sja1105_unpack(p + 0x1, &status->memov, 22, 22, 4); + sja1105_unpack(p + 0x1, &status->memerr, 21, 21, 4); + sja1105_unpack(p + 0x1, &status->invtyp, 19, 19, 4); + sja1105_unpack(p + 0x1, &status->intcyov, 18, 18, 4); + sja1105_unpack(p + 0x1, &status->domerr, 17, 17, 4); + sja1105_unpack(p + 0x1, &status->pcfbagdrop, 16, 16, 4); + sja1105_unpack(p + 0x1, &status->spcprior, 15, 12, 4); + sja1105_unpack(p + 0x1, &status->ageprior, 11, 8, 4); + sja1105_unpack(p + 0x1, &status->portdrop, 6, 6, 4); + sja1105_unpack(p + 0x1, &status->lendrop, 5, 5, 4); + sja1105_unpack(p + 0x1, &status->bagdrop, 4, 4, 4); + sja1105_unpack(p + 0x1, &status->policeerr, 3, 3, 4); + sja1105_unpack(p + 0x1, &status->drpnona664err, 2, 2, 4); + sja1105_unpack(p + 0x1, &status->spcerr, 1, 1, 4); + sja1105_unpack(p + 0x1, &status->agedrp, 0, 0, 4); +} + +static void +sja1105_port_status_hl1_unpack(void *buf, + struct sja1105_port_status_hl1 *status) +{ + /* Make pointer arithmetic work on 4 bytes */ + u32 *p = buf; + + sja1105_unpack(p + 0xF, &status->n_n664err, 31, 0, 4); + sja1105_unpack(p + 0xE, &status->n_vlanerr, 31, 0, 4); + sja1105_unpack(p + 0xD, &status->n_unreleased, 31, 0, 4); + sja1105_unpack(p + 0xC, &status->n_sizeerr, 31, 0, 4); + sja1105_unpack(p + 0xB, &status->n_crcerr, 31, 0, 4); + sja1105_unpack(p + 0xA, &status->n_vlnotfound, 31, 0, 4); + sja1105_unpack(p + 0x9, &status->n_ctpolerr, 31, 0, 4); + sja1105_unpack(p + 0x8, &status->n_polerr, 31, 0, 4); + sja1105_unpack(p + 0x7, &status->n_rxfrmsh, 31, 0, 4); + sja1105_unpack(p + 0x6, &status->n_rxfrm, 31, 0, 4); + sja1105_unpack(p + 0x5, &status->n_rxbytesh, 31, 0, 4); + sja1105_unpack(p + 0x4, &status->n_rxbyte, 31, 0, 4); + sja1105_unpack(p + 0x3, &status->n_txfrmsh, 31, 0, 4); + sja1105_unpack(p + 0x2, &status->n_txfrm, 31, 0, 4); + sja1105_unpack(p + 0x1, &status->n_txbytesh, 31, 0, 4); + sja1105_unpack(p + 0x0, &status->n_txbyte, 31, 0, 4); + status->n_rxfrm += status->n_rxfrmsh << 32; + status->n_rxbyte += status->n_rxbytesh << 32; + status->n_txfrm += status->n_txfrmsh << 32; + status->n_txbyte += status->n_txbytesh << 32; +} + +static void +sja1105_port_status_hl2_unpack(void *buf, + struct sja1105_port_status_hl2 *status) +{ + /* Make pointer arithmetic work on 4 bytes */ + u32 *p = buf; + + sja1105_unpack(p + 0x3, &status->n_qfull, 31, 0, 4); + sja1105_unpack(p + 0x2, &status->n_part_drop, 31, 0, 4); + sja1105_unpack(p + 0x1, &status->n_egr_disabled, 31, 0, 4); + sja1105_unpack(p + 0x0, &status->n_not_reach, 31, 0, 4); +} + +static void +sja1105pqrs_port_status_qlevel_unpack(void *buf, + struct sja1105_port_status_hl2 *status) +{ + /* Make pointer arithmetic work on 4 bytes */ + u32 *p = buf; + int i; + + for (i = 0; i < 8; i++) { + sja1105_unpack(p + i, &status->qlevel_hwm[i], 24, 16, 4); + sja1105_unpack(p + i, &status->qlevel[i], 8, 0, 4); + } +} + +static int sja1105_port_status_get_mac(struct sja1105_private *priv, + struct sja1105_port_status_mac *status, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_MAC_AREA] = {0}; + int rc; + + /* MAC area */ + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->mac[port], + packed_buf, SJA1105_SIZE_MAC_AREA); + if (rc < 0) + return rc; + + sja1105_port_status_mac_unpack(packed_buf, status); + + return 0; +} + +static int sja1105_port_status_get_hl1(struct sja1105_private *priv, + struct sja1105_port_status_hl1 *status, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_HL1_AREA] = {0}; + int rc; + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->mac_hl1[port], + packed_buf, SJA1105_SIZE_HL1_AREA); + if (rc < 0) + return rc; + + sja1105_port_status_hl1_unpack(packed_buf, status); + + return 0; +} + +static int sja1105_port_status_get_hl2(struct sja1105_private *priv, + struct sja1105_port_status_hl2 *status, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_QLEVEL_AREA] = {0}; + int rc; + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->mac_hl2[port], + packed_buf, SJA1105_SIZE_HL2_AREA); + if (rc < 0) + return rc; + + sja1105_port_status_hl2_unpack(packed_buf, status); + + /* Code below is strictly P/Q/R/S specific. */ + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + return 0; + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->qlevel[port], + packed_buf, SJA1105_SIZE_QLEVEL_AREA); + if (rc < 0) + return rc; + + sja1105pqrs_port_status_qlevel_unpack(packed_buf, status); + + return 0; +} + +static int sja1105_port_status_get(struct sja1105_private *priv, + struct sja1105_port_status *status, + int port) +{ + int rc; + + rc = sja1105_port_status_get_mac(priv, &status->mac, port); + if (rc < 0) + return rc; + rc = sja1105_port_status_get_hl1(priv, &status->hl1, port); + if (rc < 0) + return rc; + rc = sja1105_port_status_get_hl2(priv, &status->hl2, port); + if (rc < 0) + return rc; + + return 0; +} + +static char sja1105_port_stats[][ETH_GSTRING_LEN] = { + /* MAC-Level Diagnostic Counters */ + "n_runt", + "n_soferr", + "n_alignerr", + "n_miierr", + /* MAC-Level Diagnostic Flags */ + "typeerr", + "sizeerr", + "tctimeout", + "priorerr", + "nomaster", + "memov", + "memerr", + "invtyp", + "intcyov", + "domerr", + "pcfbagdrop", + "spcprior", + "ageprior", + "portdrop", + "lendrop", + "bagdrop", + "policeerr", + "drpnona664err", + "spcerr", + "agedrp", + /* High-Level Diagnostic Counters */ + "n_n664err", + "n_vlanerr", + "n_unreleased", + "n_sizeerr", + "n_crcerr", + "n_vlnotfound", + "n_ctpolerr", + "n_polerr", + "n_rxfrm", + "n_rxbyte", + "n_txfrm", + "n_txbyte", + "n_qfull", + "n_part_drop", + "n_egr_disabled", + "n_not_reach", +}; + +static char sja1105pqrs_extra_port_stats[][ETH_GSTRING_LEN] = { + /* Queue Levels */ + "qlevel_hwm_0", + "qlevel_hwm_1", + "qlevel_hwm_2", + "qlevel_hwm_3", + "qlevel_hwm_4", + "qlevel_hwm_5", + "qlevel_hwm_6", + "qlevel_hwm_7", + "qlevel_0", + "qlevel_1", + "qlevel_2", + "qlevel_3", + "qlevel_4", + "qlevel_5", + "qlevel_6", + "qlevel_7", +}; + +void sja1105_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *data) +{ + struct sja1105_private *priv = ds->priv; + struct sja1105_port_status status = {0}; + int rc, i, k = 0; + + rc = sja1105_port_status_get(priv, &status, port); + if (rc < 0) { + dev_err(ds->dev, "Failed to read port %d counters: %d\n", + port, rc); + return; + } + memset(data, 0, ARRAY_SIZE(sja1105_port_stats) * sizeof(u64)); + data[k++] = status.mac.n_runt; + data[k++] = status.mac.n_soferr; + data[k++] = status.mac.n_alignerr; + data[k++] = status.mac.n_miierr; + data[k++] = status.mac.typeerr; + data[k++] = status.mac.sizeerr; + data[k++] = status.mac.tctimeout; + data[k++] = status.mac.priorerr; + data[k++] = status.mac.nomaster; + data[k++] = status.mac.memov; + data[k++] = status.mac.memerr; + data[k++] = status.mac.invtyp; + data[k++] = status.mac.intcyov; + data[k++] = status.mac.domerr; + data[k++] = status.mac.pcfbagdrop; + data[k++] = status.mac.spcprior; + data[k++] = status.mac.ageprior; + data[k++] = status.mac.portdrop; + data[k++] = status.mac.lendrop; + data[k++] = status.mac.bagdrop; + data[k++] = status.mac.policeerr; + data[k++] = status.mac.drpnona664err; + data[k++] = status.mac.spcerr; + data[k++] = status.mac.agedrp; + data[k++] = status.hl1.n_n664err; + data[k++] = status.hl1.n_vlanerr; + data[k++] = status.hl1.n_unreleased; + data[k++] = status.hl1.n_sizeerr; + data[k++] = status.hl1.n_crcerr; + data[k++] = status.hl1.n_vlnotfound; + data[k++] = status.hl1.n_ctpolerr; + data[k++] = status.hl1.n_polerr; + data[k++] = status.hl1.n_rxfrm; + data[k++] = status.hl1.n_rxbyte; + data[k++] = status.hl1.n_txfrm; + data[k++] = status.hl1.n_txbyte; + data[k++] = status.hl2.n_qfull; + data[k++] = status.hl2.n_part_drop; + data[k++] = status.hl2.n_egr_disabled; + data[k++] = status.hl2.n_not_reach; + + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + return; + + memset(data + k, 0, ARRAY_SIZE(sja1105pqrs_extra_port_stats) * + sizeof(u64)); + for (i = 0; i < 8; i++) { + data[k++] = status.hl2.qlevel_hwm[i]; + data[k++] = status.hl2.qlevel[i]; + } +} + +void sja1105_get_strings(struct dsa_switch *ds, int port, + u32 stringset, u8 *data) +{ + struct sja1105_private *priv = ds->priv; + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(sja1105_port_stats); i++) { + strlcpy(p, sja1105_port_stats[i], ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + if (priv->info->device_id == SJA1105E_DEVICE_ID || + priv->info->device_id == SJA1105T_DEVICE_ID) + return; + for (i = 0; i < ARRAY_SIZE(sja1105pqrs_extra_port_stats); i++) { + strlcpy(p, sja1105pqrs_extra_port_stats[i], + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + } +} + +int sja1105_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + int count = ARRAY_SIZE(sja1105_port_stats); + struct sja1105_private *priv = ds->priv; + + if (sset != ETH_SS_STATS) + return -EOPNOTSUPP; + + if (priv->info->device_id == SJA1105PR_DEVICE_ID || + priv->info->device_id == SJA1105QS_DEVICE_ID) + count += ARRAY_SIZE(sja1105pqrs_extra_port_stats); + + return count; +} + diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index f7b1525b388a..28b11c7a81e7 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -1253,6 +1253,9 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .get_tag_protocol = sja1105_get_tag_protocol, .setup = sja1105_setup, .adjust_link = sja1105_adjust_link, + .get_strings = sja1105_get_strings, + .get_ethtool_stats = sja1105_get_ethtool_stats, + .get_sset_count = sja1105_get_sset_count, .port_fdb_dump = sja1105_fdb_dump, .port_fdb_add = sja1105_fdb_add, .port_fdb_del = sja1105_fdb_del, From patchwork Mon Apr 29 00:17:02 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092377 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="ZR48QrW/"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44sldD6NS9z9s6w for ; Mon, 29 Apr 2019 10:18:56 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727338AbfD2ASk (ORCPT ); Sun, 28 Apr 2019 20:18:40 -0400 Received: from mail-wm1-f67.google.com ([209.85.128.67]:33013 "EHLO mail-wm1-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727119AbfD2ASM (ORCPT ); Sun, 28 Apr 2019 20:18:12 -0400 Received: by mail-wm1-f67.google.com with SMTP id z6so8269881wmi.0; Sun, 28 Apr 2019 17:18:10 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=ReC0NB4EcDDzZP8++5EwDoBkw/g+orXNdcKDDbqW+HQ=; b=ZR48QrW/KybH/VGaMREEftVo/F8tXR+/QGLO11Fv5h0f24BM6LNG/W8+ElsHpTHMkB oc9alD4tJHFQY7Lx5KJazjDqL80Utp5S0DEBLxNsK40t7X9N/Km3SavGskcvdYLYw3nM Hr3l7gNwIVI/kP6hE1Ap7ITkcvyN605iiQ36t9teIj0BjOpGzMnx8jXC8sSZBKTNYUw1 gfIA1ysTkkWI4DOviUYou12WtSckiCD5mWUYbdyPP08OpIr3yaS6lKTvncNzf8+jJz0D 5V2CfgrrJ/kLdyyObdwBIfElUybU2VasrB4+uPeFKr+LC1WF1kDSWjh+59Pph1OCbRuv vvZA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=ReC0NB4EcDDzZP8++5EwDoBkw/g+orXNdcKDDbqW+HQ=; b=scZQGjZARbtm+V0aMSp/gHhK+JvEEWksW7y5T95kHJwo3CoK9AcT9dvzEsOyOMJN9a g5G4EfGgUxluwaGT3DVRdIzJifpSJGUypsdIiXAvWTfMfL/Mfeu5PD4gdLCCME5hlugn wtCjFto27mrqwELckLkDFlFKu1tZycd+a/LNx/bBB4a5aGQ9Y+Vq6CJwA+buR7XhhDF8 cI3vQGOhamS9IV2S4vJCsyM/cm64KENpmeIx6WsC3cxeOM5IlIMmnJmFPQtVgrQ3tQZW Dioxpf2d0aMTOYYaVXxcAsCMp0p0ToIX1IVFZdk2imsibJd/xOYjz3urBXTH8/4rL7zR JK0w== X-Gm-Message-State: APjAAAUVP9+W+Li7mmzQCH7CVaIBVOyMww//e5aziYuPlpZpsA3o+KYg Sv/SyntcjwRaG52I5V6sScE= X-Google-Smtp-Source: APXvYqyDdsSW8lh2QJEPo8alxCOwacM0ncr1vWBcTK8dbJEOYzqEHpH928aiG382uv2T9yNU4TJBUw== X-Received: by 2002:a1c:2d91:: with SMTP id t139mr16197420wmt.102.1556497089918; Sun, 28 Apr 2019 17:18:09 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.09 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:09 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 08/12] net: dsa: sja1105: Add support for configuring address aging time Date: Mon, 29 Apr 2019 03:17:02 +0300 Message-Id: <20190429001706.7449-9-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org If STP is active, this setting is applied on bridged ports each time an Ethernet link is established (topology changes). Since the setting is global to the switch and a reset is required to change it, resets are prevented if the new callback does not change the value that the hardware already is programmed for. Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn --- Changes in v4: Patch is new. drivers/net/dsa/sja1105/sja1105.h | 4 ++++ drivers/net/dsa/sja1105/sja1105_main.c | 29 ++++++++++++++++++++++++-- 2 files changed, 31 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index f7195352d235..d91586a6f83e 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -12,6 +12,10 @@ #define SJA1105_NUM_PORTS 5 #define SJA1105_NUM_TC 8 #define SJA1105ET_FDB_BIN_SIZE 4 +/* The hardware value is in multiples of 10 ms. + * The passed parameter is in multiples of 1 ms. + */ +#define SJA1105_AGEING_TIME_MS(ms) ((ms) / 10) /* Keeps the different addresses between E/T and P/Q/R/S */ struct sja1105_regs { diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 28b11c7a81e7..f5205ce85dbe 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -193,8 +193,8 @@ static int sja1105_init_l2_lookup_params(struct sja1105_private *priv) { struct sja1105_table *table; struct sja1105_l2_lookup_params_entry default_l2_lookup_params = { - /* TODO Learned FDB entries are never forgotten */ - .maxage = 0, + /* Learned FDB entries are forgotten after 300 seconds */ + .maxage = SJA1105_AGEING_TIME_MS(300000), /* All entries within a FDB bin are available for learning */ .dyn_tbsz = SJA1105ET_FDB_BIN_SIZE, /* 2^8 + 2^5 + 2^3 + 2^2 + 2^1 + 1 in Koopman notation */ @@ -1249,10 +1249,35 @@ static int sja1105_setup(struct dsa_switch *ds) return 0; } +/* The MAXAGE setting belongs to the L2 Forwarding Parameters table, + * which cannot be reconfigured at runtime. So a switch reset is required. + */ +static int sja1105_set_ageing_time(struct dsa_switch *ds, + unsigned int ageing_time) +{ + struct sja1105_l2_lookup_params_entry *l2_lookup_params; + struct sja1105_private *priv = ds->priv; + struct sja1105_table *table; + unsigned int maxage; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; + l2_lookup_params = table->entries; + + maxage = SJA1105_AGEING_TIME_MS(ageing_time); + + if (l2_lookup_params->maxage == maxage) + return 0; + + l2_lookup_params->maxage = maxage; + + return sja1105_static_config_reload(priv); +} + static const struct dsa_switch_ops sja1105_switch_ops = { .get_tag_protocol = sja1105_get_tag_protocol, .setup = sja1105_setup, .adjust_link = sja1105_adjust_link, + .set_ageing_time = sja1105_set_ageing_time, .get_strings = sja1105_get_strings, .get_ethtool_stats = sja1105_get_ethtool_stats, .get_sset_count = sja1105_get_sset_count, From patchwork Mon Apr 29 00:17:03 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092375 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="V7OouUDl"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44slcv16N1z9s7T for ; Mon, 29 Apr 2019 10:18:39 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727296AbfD2ASh (ORCPT ); Sun, 28 Apr 2019 20:18:37 -0400 Received: from mail-wr1-f68.google.com ([209.85.221.68]:33386 "EHLO mail-wr1-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726955AbfD2ASN (ORCPT ); Sun, 28 Apr 2019 20:18:13 -0400 Received: by mail-wr1-f68.google.com with SMTP id s18so13323334wrp.0; Sun, 28 Apr 2019 17:18:11 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=3mywIiFHc2+W1VIMBbrflgmjAz56y4bnA8MVXNfpG/g=; b=V7OouUDl6OM4Hj+oUVVBnK2Vnd6YV9lTwAduxkN4Pmn0fdxV1tDAHv5dRcQXyJU7WD c+XaJf/kQjn3PtP2dHzUMBvfOf2vKvK9kJUv2IdLkDTBEYoOts+0uklGbIYRy8zxWKeS Q0DP5VhOS7OXn1xkebU4WngDzMQYB/fTkBLVB0qMJP+wPqT5CyZgdqYiDOoVwUKJ8b/k AO5wst+qFXdn41daYWmI6scRne6yoJUExzSPs4z0ti7xYv7zLuORnxRKUChp8L83XKtQ liWB96LAU/WRcRP2QRUODBOwhHmysbsv7Zm8MybvBYAVwknANm8LZCarxdrf0qe2KS3t b0kg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=3mywIiFHc2+W1VIMBbrflgmjAz56y4bnA8MVXNfpG/g=; b=tawwv8XUhYqfHgrsiZkdJvGLlHx/dm3Qjb7hgyiZs7nR9eJkRlUtzipf+qyoSedOvd v6vH7g3M9C2adBIwT+fZu/A8Wr6/A8ytuwIga+WdA2kpFEMgEQKu+LW0G+VzSKLSeqfw VjhgHUHsunytSF7GwcS003Vnkj9w/E2MNiUhxjgeTJQ1R9PaOzhqxAb5LZsUvGmvZTEX 4auItBcYGOUTnn0BBS0pg8Hi/fEBLTPoMzWxztOs0ucLvGwcOxJ8FcAwgJxKA3mxuFi4 R1WXlMr02Y8D1B7S1ZMnp/W30xQvNheiIP7bTBGy8w3v3euRA7JX9Yc36bDw+4nW5x/L HN5A== X-Gm-Message-State: APjAAAXUFy0Eq26baEl3ZgGI5h8bpMgDkdyJespLTc1Xv4YpiQwvLf02 PxMKvwilC29Y/CrE5TFYg6I= X-Google-Smtp-Source: APXvYqzJci00loAHE2cgndP5fCLiJMOwJDZ+/rxkCzykOKJzYSoGBWIdZkjSXgJMEIxW1ghUrH+DTw== X-Received: by 2002:adf:f70a:: with SMTP id r10mr22325379wrp.96.1556497090903; Sun, 28 Apr 2019 17:18:10 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.09 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:10 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 09/12] net: dsa: sja1105: Prevent PHY jabbering during switch reset Date: Mon, 29 Apr 2019 03:17:03 +0300 Message-Id: <20190429001706.7449-10-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Resetting the switch at runtime is currently done while changing the vlan_filtering setting (due to the required TPID change). But reset is asynchronous with packet egress, and the switch core will not wait for egress to finish before carrying on with the reset operation. As a result, a connected PHY such as the BCM5464 would see an unterminated Ethernet frame and start to jabber (repeat the last seen Ethernet symbols - jabber is by definition an oversized Ethernet frame with bad FCS). This behavior is strange in itself, but it also causes the MACs of some link partners (such as the FRDM-LS1012A) to completely lock up. So as a remedy for this situation, when switch reset is required, simply inhibit Tx on all ports, and wait for the necessary time for the eventual one frame left in the egress queue (not even the Tx inhibit command is instantaneous) to be flushed. Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn --- Changes in v4: Changed SIZE_PORT_CTRL to SJA1105_SIZE_PORT_CTRL. Changes in v3: None. Changes in v2: Patch is new. drivers/net/dsa/sja1105/sja1105.h | 1 + drivers/net/dsa/sja1105/sja1105_spi.c | 37 +++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index d91586a6f83e..8722fc88d2cb 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -22,6 +22,7 @@ struct sja1105_regs { u64 device_id; u64 prod_id; u64 status; + u64 port_control; u64 rgu; u64 config; u64 rmii_pll1; diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c index c0b0057b09b3..447014234359 100644 --- a/drivers/net/dsa/sja1105/sja1105_spi.c +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -7,6 +7,7 @@ #include #include "sja1105.h" +#define SJA1105_SIZE_PORT_CTRL 4 #define SJA1105_SIZE_RESET_CMD 4 #define SJA1105_SIZE_SPI_MSG_HEADER 4 #define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4) @@ -282,6 +283,25 @@ static int sja1105_cold_reset(const struct sja1105_private *priv) return priv->info->reset_cmd(priv, &reset); } +static int sja1105_inhibit_tx(const struct sja1105_private *priv, + const unsigned long *port_bitmap) +{ + const struct sja1105_regs *regs = priv->info->regs; + u64 inhibit_cmd; + int port, rc; + + rc = sja1105_spi_send_int(priv, SPI_READ, regs->port_control, + &inhibit_cmd, SJA1105_SIZE_PORT_CTRL); + if (rc < 0) + return rc; + + for_each_set_bit(port, port_bitmap, SJA1105_NUM_PORTS) + inhibit_cmd |= BIT(port); + + return sja1105_spi_send_int(priv, SPI_WRITE, regs->port_control, + &inhibit_cmd, SJA1105_SIZE_PORT_CTRL); +} + struct sja1105_status { u64 configs; u64 crcchkl; @@ -370,6 +390,7 @@ static_config_buf_prepare_for_upload(struct sja1105_private *priv, int sja1105_static_config_upload(struct sja1105_private *priv) { + unsigned long port_bitmap = GENMASK_ULL(SJA1105_NUM_PORTS - 1, 0); struct sja1105_static_config *config = &priv->static_config; const struct sja1105_regs *regs = priv->info->regs; struct device *dev = &priv->spidev->dev; @@ -388,6 +409,20 @@ int sja1105_static_config_upload(struct sja1105_private *priv) dev_err(dev, "Invalid config, cannot upload\n"); return -EINVAL; } + /* Prevent PHY jabbering during switch reset by inhibiting + * Tx on all ports and waiting for current packet to drain. + * Otherwise, the PHY will see an unterminated Ethernet packet. + */ + rc = sja1105_inhibit_tx(priv, &port_bitmap); + if (rc < 0) { + dev_err(dev, "Failed to inhibit Tx on ports\n"); + return -ENXIO; + } + /* Wait for an eventual egress packet to finish transmission + * (reach IFG). It is guaranteed that a second one will not + * follow, and that switch cold reset is thus safe + */ + usleep_range(500, 1000); do { /* Put the SJA1105 in programming mode */ rc = sja1105_cold_reset(priv); @@ -452,6 +487,7 @@ struct sja1105_regs sja1105et_regs = { .device_id = 0x0, .prod_id = 0x100BC3, .status = 0x1, + .port_control = 0x11, .config = 0x020000, .rgu = 0x100440, .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, @@ -476,6 +512,7 @@ struct sja1105_regs sja1105pqrs_regs = { .device_id = 0x0, .prod_id = 0x100BC3, .status = 0x1, + .port_control = 0x12, .config = 0x020000, .rgu = 0x100440, .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, From patchwork Mon Apr 29 00:17:04 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092379 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="XgsjIdxK"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44sldX5cBhz9s6w for ; Mon, 29 Apr 2019 10:19:12 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727272AbfD2ASg (ORCPT ); Sun, 28 Apr 2019 20:18:36 -0400 Received: from mail-wm1-f65.google.com ([209.85.128.65]:53389 "EHLO mail-wm1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727134AbfD2ASO (ORCPT ); Sun, 28 Apr 2019 20:18:14 -0400 Received: by mail-wm1-f65.google.com with SMTP id 26so11575242wmj.3; Sun, 28 Apr 2019 17:18:12 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=MqUoyAzUDsFlk0d3wBgPciFWjMtEf/VeaFykVMLMQWw=; b=XgsjIdxKsICMpDFkZ9a/CO0M2UHpMzqSchscDOVick+C+n2tzsGuss3aQogY0bASe5 cyTTh1ZXXsuj/bzbe2pUDGxQU9JaeYWveAGKCblaTaUYLAoC6f/vFhZj+r7jTZb/c4QK RdFWGvbjnZ/GcT3sLskmTsThQcljcZWMR5WakjkGz8Nc59hOGQeSQMqGQkhv/wH1iE20 aHde9BTwIZ3Z2ZitbRLjop4+dbD5Z/WohIQ1TrjnxSiwXWIu5p4Tl747SF5lftm96S2R arq/kdrV4xEgyGiBWntnxxjSz3Y+5vW5Jd51hO+t7pOlY0fIbJz6i3+mpamL0RV9ccKZ TalA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=MqUoyAzUDsFlk0d3wBgPciFWjMtEf/VeaFykVMLMQWw=; b=pFCI0UbyhEZma1Xgb5ROQEZTH2oqRDA3wqq0Ysdq8ithXy6x5duOmBIeBvqP14LIHN GVaQhK+juIuGZBvCNsi5RXJQKqbO7ljynxHmPVjdMinH9XkQNgbl0x8G5NmOKtTMuJNp pkdleWDJKCg1v25nVl+QjkQrS8cA9qNMn8RA4kX8TkBSZQORStFdRzUeS9eeWPs2sfEH NWl1CU3Ar8rF6i4gKwcKmzf4Q94M5jN9uWSVLgHWQhHYmDGMjaERLdpNFcJI5g48qFY5 TflvsAyDwOC5JtHEf7Q7b2OqYLN5/Zm3p1eZbFm0huaYyuyA30evEyZQmZIvWhSLCg6e +O3Q== X-Gm-Message-State: APjAAAX/EL7szXvnGrHubxz6NlmLriXBcb2VKt/UFtyxIC1S3PCzbD3S zoH/JyxBJzWLrKDshom4kbA= X-Google-Smtp-Source: APXvYqy1q+Dt7hA5Q5ZnUbwT4RtQVvhfwDtZ40fPn6y/287p1RxaICXhRreJHv+htC8D70ro9FPpEA== X-Received: by 2002:a1c:ef09:: with SMTP id n9mr10886791wmh.104.1556497091793; Sun, 28 Apr 2019 17:18:11 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.10 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:11 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 10/12] net: dsa: sja1105: Reject unsupported link modes for AN Date: Mon, 29 Apr 2019 03:17:04 +0300 Message-Id: <20190429001706.7449-11-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Ethernet flow control: The switch MAC does not consume, nor does it emit pause frames. It simply forwards them as any other Ethernet frame (and since the DMAC is, per IEEE spec, 01-80-C2-00-00-01, it means they are filtered as link-local traffic and forwarded to the CPU, which can't do anything useful with them). Duplex: There is no duplex setting in the SJA1105 MAC. It is known to forward traffic at line rate on the same port in both directions. Therefore it must be that it only supports full duplex. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli --- Changes in v4: None. Changes in v3: None. Changes in v2: Patch is new. drivers/net/dsa/sja1105/sja1105_main.c | 31 ++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index f5205ce85dbe..74f8ff9e17e0 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -726,6 +727,35 @@ static void sja1105_adjust_link(struct dsa_switch *ds, int port, sja1105_adjust_port_config(priv, port, phydev->speed, true); } +static void sja1105_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + /* Construct a new mask which exhaustively contains all link features + * supported by the MAC, and then apply that (logical AND) to what will + * be sent to the PHY for "marketing". + */ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + struct sja1105_private *priv = ds->priv; + struct sja1105_xmii_params_entry *mii; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + + /* The MAC does not support pause frames, and also doesn't + * support half-duplex traffic modes. + */ + phylink_set(mask, Autoneg); + phylink_set(mask, MII); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Full); + if (mii->xmii_mode[port] == XMII_MODE_RGMII) + phylink_set(mask, 1000baseT_Full); + + bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS); + bitmap_and(state->advertising, state->advertising, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); +} + /* First-generation switches have a 4-way set associative TCAM that * holds the FDB entries. An FDB index spans from 0 to 1023 and is comprised of * a "bin" (grouping of 4 entries) and a "way" (an entry within a bin). @@ -1278,6 +1308,7 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .setup = sja1105_setup, .adjust_link = sja1105_adjust_link, .set_ageing_time = sja1105_set_ageing_time, + .phylink_validate = sja1105_phylink_validate, .get_strings = sja1105_get_strings, .get_ethtool_stats = sja1105_get_ethtool_stats, .get_sset_count = sja1105_get_sset_count, From patchwork Mon Apr 29 00:17:05 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092373 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="c+rna2SH"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44slcj2YqZz9s7T for ; Mon, 29 Apr 2019 10:18:29 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727218AbfD2ASR (ORCPT ); Sun, 28 Apr 2019 20:18:17 -0400 Received: from mail-wm1-f65.google.com ([209.85.128.65]:34737 "EHLO mail-wm1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727137AbfD2ASQ (ORCPT ); Sun, 28 Apr 2019 20:18:16 -0400 Received: by mail-wm1-f65.google.com with SMTP id b67so1711426wmg.1; Sun, 28 Apr 2019 17:18:13 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=Ekmf/iCiwYUJOyS9XMTLs//GJ1lEH4C2AK7EKmVQ+nU=; b=c+rna2SHz0Ghkz1Mqof0fDbJE9piV7wvthS8XIjnIqAI4Q5ViUBTAp6TTGk76vs/ps AIoLsL0S6XxVsf+H1x1M1S/9l/cVAt8JClq2BbtzwYarz5mACzms9HorVQZQdFUwLsjn zH4UnORpouqeIxQKTh/6uLLW/4IzBAye0Sl42LwGHsXf6rRvgBsgfIkY2oZ4/NLdEsCH oDLVHKStTaCKHDmztXVkh11uf9Tl151YCg6N7rvrZ8AD4fNtFySGIKjPNS3PYUw0WJF+ /B91h/DHaacYUGYFmWHTVyK79BiVWxon1651BrBKjde1h4Rj57MMHR5ESq5SuvWge4W8 Lddw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=Ekmf/iCiwYUJOyS9XMTLs//GJ1lEH4C2AK7EKmVQ+nU=; b=L7IzRZksfn7BdkL+iRLZdZHkPcJg3CNq7WOSIGnjpDpWWDJOnF+LUAr66GW87rnxnn Oh5vOJ5YwnzsmJTFRDDi+jTU+4owA+XHyjz7mWZmagzLR1T6rWe784opc08puxLrp0xT /vVxXvqvjRPgoqx1Fj7GYfBCUNR5pQhijsC/saYGeMWBKMViEW+4V8IQswi7yzjROFP+ eWSOR6Bx4T9giSjMm3MUIxcfDN6jTNBiAIEueLaIbIYBY73zLbMSjTAMP3Y5YFSL0Izn XZpzyJP+9AAwn/zW5Fv4h6E9wEcLOLc8DtA/PnOqJ/j7XzYEGxpmyWuXPdQm7Ia24ivi 8GOg== X-Gm-Message-State: APjAAAVDMTtpj6lNbRiDBNUSX/7qqqAO15TyZGg6/oMSXFgoh6W2BuF9 tpvNHgw+5LyN181B0kHMXaQqqWZHPZ8= X-Google-Smtp-Source: APXvYqy9RhkflfvPjfvhWJ02KiFAitfHALj6v2MKbnSAfyEnUa1qcC+Ixsmq4NkcwrF7NvvOsoGvLg== X-Received: by 2002:a1c:730c:: with SMTP id d12mr14639246wmb.47.1556497092691; Sun, 28 Apr 2019 17:18:12 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.11 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:12 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 11/12] Documentation: net: dsa: Add details about NXP SJA1105 driver Date: Mon, 29 Apr 2019 03:17:05 +0300 Message-Id: <20190429001706.7449-12-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Signed-off-by: Vladimir Oltean --- Changes in v4: Removed the section about traffic, as well as mentions of other unsupported yet features. Changes in v3: Reworked as rst, added a table for traffic support, added chapter for switching features. Changes in v2: More verbiage at the end, regarding RGMII delays and potentially other hardware-related caveats. Documentation/networking/dsa/index.rst | 1 + Documentation/networking/dsa/sja1105.rst | 167 +++++++++++++++++++++++ 2 files changed, 168 insertions(+) create mode 100644 Documentation/networking/dsa/sja1105.rst diff --git a/Documentation/networking/dsa/index.rst b/Documentation/networking/dsa/index.rst index 5c488d345a1e..0e5b7a9be406 100644 --- a/Documentation/networking/dsa/index.rst +++ b/Documentation/networking/dsa/index.rst @@ -8,3 +8,4 @@ Distributed Switch Architecture dsa bcm_sf2 lan9303 + sja1105 diff --git a/Documentation/networking/dsa/sja1105.rst b/Documentation/networking/dsa/sja1105.rst new file mode 100644 index 000000000000..71cdb19bb66e --- /dev/null +++ b/Documentation/networking/dsa/sja1105.rst @@ -0,0 +1,167 @@ +========================= +NXP SJA1105 switch driver +========================= + +Overview +======== + +The NXP SJA1105 is a family of 6 devices: + +- SJA1105E: First generation, no TTEthernet +- SJA1105T: First generation, TTEthernet +- SJA1105P: Second generation, no TTEthernet, no SGMII +- SJA1105Q: Second generation, TTEthernet, no SGMII +- SJA1105R: Second generation, no TTEthernet, SGMII +- SJA1105S: Second generation, TTEthernet, SGMII + +These are SPI-managed automotive switches, with all ports being gigabit +capable, and supporting MII/RMII/RGMII and optionally SGMII on one port. + +Being automotive parts, their configuration interface is geared towards +set-and-forget use, with minimal dynamic interaction at runtime. They +require a static configuration to be composed by software and packed +with CRC and table headers, and sent over SPI. + +The static configuration is composed of several configuration tables. Each +table takes a number of entries. Some configuration tables can be (partially) +reconfigured at runtime, some not. Some tables are mandatory, some not: + +============================= ================== ============================= +Table Mandatory Reconfigurable +============================= ================== ============================= +Schedule no no +Schedule entry points if Scheduling no +VL Lookup no no +VL Policing if VL Lookup no +VL Forwarding if VL Lookup no +L2 Lookup no no +L2 Policing yes no +VLAN Lookup yes yes +L2 Forwarding yes partially (fully on P/Q/R/S) +MAC Config yes partially (fully on P/Q/R/S) +Schedule Params if Scheduling no +Schedule Entry Points Params if Scheduling no +VL Forwarding Params if VL Forwarding no +L2 Lookup Params no partially (fully on P/Q/R/S) +L2 Forwarding Params yes no +Clock Sync Params no no +AVB Params no no +General Params yes partially +Retagging no yes +xMII Params yes no +SGMII no yes +============================= ================== ============================= + + +Also the configuration is write-only (software cannot read it back from the +switch except for very few exceptions). + +The driver creates a static configuration at probe time, and keeps it at +all times in memory, as a shadow for the hardware state. When required to +change a hardware setting, the static configuration is also updated. +If that changed setting can be transmitted to the switch through the dynamic +reconfiguration interface, it is; otherwise the switch is reset and +reprogrammed with the updated static configuration. + +Switching features +================== + +The driver supports the configuration of L2 forwarding rules in hardware for +port bridging. The forwarding, broadcast and flooding domain between ports can +be restricted through two methods: either at the L2 forwarding level (isolate +one bridge's ports from another's) or at the VLAN port membership level +(isolate ports within the same bridge). The final forwarding decision taken by +the hardware is a logical AND of these two sets of rules. + +The hardware tags all traffic internally with a port-based VLAN (pvid), or it +decodes the VLAN information from the 802.1Q tag. Advanced VLAN classification +is not possible. Once attributed a VLAN tag, frames are checked against the +port's membership rules and dropped at ingress if they don't match any VLAN. +This behavior is available when switch ports are enslaved to a bridge with +``vlan_filtering 1``. + +Normally the hardware is not configurable with respect to VLAN awareness, but +by changing what TPID the switch searches 802.1Q tags for, the semantics of a +bridge with ``vlan_filtering 0`` can be kept (accept all traffic, tagged or +untagged), and therefore this mode is also supported. + +Segregating the switch ports in multiple bridges is supported (e.g. 2 + 2), but +all bridges should have the same level of VLAN awareness (either both have +``vlan_filtering`` 0, or both 1). Also an inevitable limitation of the fact +that VLAN awareness is global at the switch level is that once a bridge with +``vlan_filtering`` enslaves at least one switch port, the other un-bridged +ports are no longer available for standalone traffic termination. + +Device Tree bindings and board design +===================================== + +This section references ``Documentation/devicetree/bindings/net/dsa/sja1105.txt`` +and aims to showcase some potential switch caveats. + +RMII PHY role and out-of-band signaling +--------------------------------------- + +In the RMII spec, the 50 MHz clock signals are either driven by the MAC or by +an external oscillator (but not by the PHY). +But the spec is rather loose and devices go outside it in several ways. +Some PHYs go against the spec and may provide an output pin where they source +the 50 MHz clock themselves, in an attempt to be helpful. +On the other hand, the SJA1105 is only binary configurable - when in the RMII +MAC role it will also attempt to drive the clock signal. To prevent this from +happening it must be put in RMII PHY role. +But doing so has some unintended consequences. +In the RMII spec, the PHY can transmit extra out-of-band signals via RXD[1:0]. +These are practically some extra code words (/J/ and /K/) sent prior to the +preamble of each frame. The MAC does not have this out-of-band signaling +mechanism defined by the RMII spec. +So when the SJA1105 port is put in PHY role to avoid having 2 drivers on the +clock signal, inevitably an RMII PHY-to-PHY connection is created. The SJA1105 +emulates a PHY interface fully and generates the /J/ and /K/ symbols prior to +frame preambles, which the real PHY is not expected to understand. So the PHY +simply encodes the extra symbols received from the SJA1105-as-PHY onto the +100Base-Tx wire. +On the other side of the wire, some link partners might discard these extra +symbols, while others might choke on them and discard the entire Ethernet +frames that follow along. This looks like packet loss with some link partners +but not with others. +The take-away is that in RMII mode, the SJA1105 must be let to drive the +reference clock if connected to a PHY. + +RGMII fixed-link and internal delays +------------------------------------ + +As mentioned in the bindings document, the second generation of devices has +tunable delay lines as part of the MAC, which can be used to establish the +correct RGMII timing budget. +When powered up, these can shift the Rx and Tx clocks with a phase difference +between 73.8 and 101.7 degrees. +The catch is that the delay lines need to lock onto a clock signal with a +stable frequency. This means that there must be at least 2 microseconds of +silence between the clock at the old vs at the new frequency. Otherwise the +lock is lost and the delay lines must be reset (powered down and back up). +In RGMII the clock frequency changes with link speed (125 MHz at 1000 Mbps, 25 +MHz at 100 Mbps and 2.5 MHz at 10 Mbps), and link speed might change during the +AN process. +In the situation where the switch port is connected through an RGMII fixed-link +to a link partner whose link state life cycle is outside the control of Linux +(such as a different SoC), then the delay lines would remain unlocked (and +inactive) until there is manual intervention (ifdown/ifup on the switch port). +The take-away is that in RGMII mode, the switch's internal delays are only +reliable if the link partner never changes link speeds, or if it does, it does +so in a way that is coordinated with the switch port (practically, both ends of +the fixed-link are under control of the same Linux system). +As to why would a fixed-link interface ever change link speeds: there are +Ethernet controllers out there which come out of reset in 100 Mbps mode, and +their driver inevitably needs to change the speed and clock frequency if it's +required to work at gigabit. + +MDIO bus and PHY management +--------------------------- + +The SJA1105 does not have an MDIO bus and does not perform in-band AN either. +Therefore there is no link state notification coming from the switch device. +A board would need to hook up the PHYs connected to the switch to any other +MDIO bus available to Linux within the system (e.g. to the DSA master's MDIO +bus). Link state management then works by the driver manually keeping in sync +(over SPI commands) the MAC link speed with the settings negotiated by the PHY. + From patchwork Mon Apr 29 00:17:06 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vladimir Oltean X-Patchwork-Id: 1092372 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="BGPSCS6o"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44slcX03xKz9s7T for ; Mon, 29 Apr 2019 10:18:20 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727238AbfD2ASS (ORCPT ); Sun, 28 Apr 2019 20:18:18 -0400 Received: from mail-wm1-f67.google.com ([209.85.128.67]:55575 "EHLO mail-wm1-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727138AbfD2ASQ (ORCPT ); Sun, 28 Apr 2019 20:18:16 -0400 Received: by mail-wm1-f67.google.com with SMTP id o25so11490467wmf.5; Sun, 28 Apr 2019 17:18:14 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=WRytol4TsLCjzvjFivOBEq5e1CUmdiuLX9qE0edSQhk=; b=BGPSCS6ojz9nm/TKHuLkr9IzMY0qibhEQQLnk6L+YhFlNMV6+hj2NGw4G9PKWwiwrL uU6vzyuExMcsrYJi7orN2mApfwyGc0f6fnHgCj18k54kvzUQaGdxzr94KCD9qc/GDO0e 5UFErZlvfDtutCkLwfrMfy2UGNcC3tX0Mx15uWKbNoO4y2J+RbLhgq2ebn6+y1ymIPDb px/p7SdSH6UdQZ7utuvAih9RcM4FYdzXGPdQ3uClKbnoSpSLu4vOdSTRerJkTnF3A1j/ fclwJqEFmlc5LmJ+7upfxIYpDVeKOYANJojtcP4WZty9owSNKL7I6nZnqyOUBBB1JlOX lj2A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=WRytol4TsLCjzvjFivOBEq5e1CUmdiuLX9qE0edSQhk=; b=TNGaDeVr8uiLD/lR+XfPMaRDnkbI1i0uD54rxdTMy79rZz3w2hMPP6Kj7ylkpRDXHv s7iwZdOj08Zj88Pu9ACEvUpXuN/sICYxPwM92I4iOllIwRufaBkkhShY0wq2TA1qjGim uazLLwqos6K/dr/61NdLNuNhCOXYJ740Lh6HDQhK3B7tIO6f7oZK5ENVuheTiaXMH40O puZdNef4UuEozXN2NxAmTq3d7pVvseiKUe5c337b4lg3zTyx7sn5CBGHlbJkJNnDJ3L0 6If1yJG1fHeDBr7PEJVCBmoSiEwpYX3oAWXV1yaNQgmZMihX5DXBrdhOK0buXGSzbvji fl4w== X-Gm-Message-State: APjAAAWVs7MZjfYsdmDy8htRQzDjKYAcYgV5j80QbKpyj4faGqInBHVx HgPAqTlH0fu4Lx+ZdVztVZpCcA3XFMs= X-Google-Smtp-Source: APXvYqyL7EyYUeIAGHJUIWxCUUyfNiQqNzucPjwGb/7w8iUIAfX+Z9XF32ENViuAEGAQX5DEbPMcoA== X-Received: by 2002:a7b:c923:: with SMTP id h3mr15114054wml.34.1556497093652; Sun, 28 Apr 2019 17:18:13 -0700 (PDT) Received: from localhost.localdomain (5-12-225-227.residential.rdsnet.ro. [5.12.225.227]) by smtp.gmail.com with ESMTPSA id h16sm5098030wrb.31.2019.04.28.17.18.12 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 28 Apr 2019 17:18:13 -0700 (PDT) From: Vladimir Oltean To: f.fainelli@gmail.com, vivien.didelot@gmail.com, andrew@lunn.ch, davem@davemloft.net Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Vladimir Oltean Subject: [PATCH v4 net-next 12/12] dt-bindings: net: dsa: Add documentation for NXP SJA1105 driver Date: Mon, 29 Apr 2019 03:17:06 +0300 Message-Id: <20190429001706.7449-13-olteanv@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190429001706.7449-1-olteanv@gmail.com> References: <20190429001706.7449-1-olteanv@gmail.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli --- Changes in v4: None. Changes in v3: None. Changes in v2: Renamed sja1105,phy-mode to sja1105,role-phy and similarly for mac. Clarified the switch situation with RGMII delays. .../devicetree/bindings/net/dsa/sja1105.txt | 157 ++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/dsa/sja1105.txt diff --git a/Documentation/devicetree/bindings/net/dsa/sja1105.txt b/Documentation/devicetree/bindings/net/dsa/sja1105.txt new file mode 100644 index 000000000000..cf4961af36c4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/sja1105.txt @@ -0,0 +1,157 @@ +NXP SJA1105 switch driver +========================= + +Required properties: + +- compatible: + Must be one of: + - "nxp,sja1105e" + - "nxp,sja1105t" + - "nxp,sja1105p" + - "nxp,sja1105q" + - "nxp,sja1105r" + - "nxp,sja1105s" + + Although the device ID could be detected at runtime, explicit bindings + are required in order to be able to statically check their validity. + For example, SGMII can only be specified on port 4 of R and S devices, + and the non-SGMII devices, while pin-compatible, are not equal in terms + of support for RGMII internal delays (supported on P/Q/R/S, but not on + E/T). + +Optional properties: + +- sja1105,role-mac: +- sja1105,role-phy: + Boolean properties that can be assigned under each port node. By + default (unless otherwise specified) a port is configured as MAC if it + is driving a PHY (phy-handle is present) or as PHY if it is PHY-less + (fixed-link specified, presumably because it is connected to a MAC). + The effect of this property (in either its implicit or explicit form) + is: + - In the case of MII or RMII it specifies whether the SJA1105 port is a + clock source or sink for this interface (not applicable for RGMII + where there is a Tx and an Rx clock). + - In the case of RGMII it affects the behavior regarding internal + delays: + 1. If sja1105,role-mac is specified, and the phy-mode property is one + of "rgmii-id", "rgmii-txid" or "rgmii-rxid", then the entity + designated to apply the delay/clock skew necessary for RGMII + is the PHY. The SJA1105 MAC does not apply any internal delays. + 2. If sja1105,role-phy is specified, and the phy-mode property is one + of the above, the designated entity to apply the internal delays + is the SJA1105 MAC (if hardware-supported). This is only supported + by the second-generation (P/Q/R/S) hardware. On a first-generation + E or T device, it is an error to specify an RGMII phy-mode other + than "rgmii" for a port that is in fixed-link mode. In that case, + the clock skew must either be added by the MAC at the other end of + the fixed-link, or by PCB serpentine traces on the board. + These properties are required, for example, in the case where SJA1105 + ports are at both ends of a MII/RMII PHY-less setup. One end would need + to have sja1105,role-mac, while the other sja1105,role-phy. + +See Documentation/devicetree/bindings/net/dsa/dsa.txt for the list of standard +DSA required and optional properties. + +Other observations +------------------ + +The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944) of at least +one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum +cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed +depends on the SPI bus master driver. + +Example +------- + +Ethernet switch connected via SPI to the host, CPU port wired to enet2: + +arch/arm/boot/dts/ls1021a-tsn.dts: + +/* SPI controller of the LS1021 */ +&dspi0 { + sja1105@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + spi-max-frequency = <4000000>; + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + /* Implicit "sja1105,role-mac;" */ + }; + port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + /* Implicit "sja1105,role-mac;" */ + }; + port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + /* Implicit "sja1105,role-mac;" */ + }; + port@3 { + /* ETH4 written on chassis */ + phy-handle = <&rgmii_phy5>; + label = "swp4"; + phy-mode = "rgmii-id"; + reg = <3>; + /* Implicit "sja1105,role-mac;" */ + }; + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + /* Implicit "sja1105,role-phy;" */ + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +/* MDIO controller of the LS1021 */ +&mdio0 { + /* BCM5464 */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; +}; + +/* Ethernet master port of the LS1021 */ +&enet2 { + phy-connection-type = "rgmii"; + status = "ok"; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; +