@@ -132,8 +132,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
init->MaxNumAif = cpu_to_le32(dev->max_num_aif);
- init->HostRRQ_AddrHigh = (u32)((u64)dev->host_rrq_pa >> 32);
- init->HostRRQ_AddrLow = (u32)(dev->host_rrq_pa & 0xffffffff);
+ init->HostRRQ_AddrHigh = cpu_to_le32((u32)((u64)dev->host_rrq_pa >> 32));
+ init->HostRRQ_AddrLow = cpu_to_le32((u32)(dev->host_rrq_pa & 0xffffffff));
/*
@@ -74,7 +74,7 @@ static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
for (;;) {
isFastResponse = 0;
/* remove toggle bit (31) */
- handle = (dev->host_rrq[index] & 0x7fffffff);
+ handle = le32_to_cpu(dev->host_rrq[index]) & 0x7fffffff;
/* check fast response bit (30) */
if (handle & 0x40000000)
isFastResponse = 1;
@@ -389,30 +389,42 @@ static int aac_src_deliver_message(struct fib *fib)
struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
unsigned long qflags;
u32 fibsize;
- u64 address;
+ dma_addr_t address;
struct aac_fib_xporthdr *pFibX;
+ u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
spin_lock_irqsave(q->lock, qflags);
q->numpending++;
spin_unlock_irqrestore(q->lock, qflags);
/* Calculate the amount to the fibsize bits */
- fibsize = (sizeof(struct aac_fib_xporthdr) +
- fib->hw_fib_va->header.Size + 127) / 128 - 1;
+ fibsize = (sizeof(struct aac_fib_xporthdr) + hdr_size + 127) / 128 - 1;
if (fibsize > (ALIGN32 - 1))
- fibsize = ALIGN32 - 1;
-
- /* Fill XPORT header */
- pFibX = (struct aac_fib_xporthdr *)
- ((unsigned char *)fib->hw_fib_va -
- sizeof(struct aac_fib_xporthdr));
- pFibX->Handle = fib->hw_fib_va->header.SenderData + 1;
- pFibX->HostAddress = fib->hw_fib_pa;
- pFibX->Size = fib->hw_fib_va->header.Size;
- address = fib->hw_fib_pa - (u64)sizeof(struct aac_fib_xporthdr);
-
- src_writel(dev, MUnit.IQ_H, (u32)(address >> 32));
- src_writel(dev, MUnit.IQ_L, (u32)(address & 0xffffffff) + fibsize);
+ return -EMSGSIZE;
+
+ /* Fill XPORT header */
+ pFibX = (void *)fib->hw_fib_va - sizeof(struct aac_fib_xporthdr);
+ /*
+ * This was stored by aac_fib_send() and it is the index into
+ * dev->fibs. Not sure why we add 1 to it, but I suspect that it's
+ * because it can't be zero when we pass it to the hardware. Note that
+ * it was stored in native endian, hence the lack of swapping. -- BenC
+ */
+ pFibX->Handle = cpu_to_le32(fib->hw_fib_va->header.SenderData + 1);
+ pFibX->HostAddress = cpu_to_le64(fib->hw_fib_pa);
+ pFibX->Size = cpu_to_le32(hdr_size);
+
+ /*
+ * The xport header has been 32-byte aligned for us so that fibsize
+ * can be masked out of this address by hardware. -- BenC
+ */
+ address = fib->hw_fib_pa - sizeof(struct aac_fib_xporthdr);
+ if (address & (ALIGN32 - 1))
+ return -EINVAL;
+ address |= fibsize;
+ src_writel(dev, MUnit.IQ_H, (address >> 32) & 0xffffffff);
+ src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
+
return 0;
}
This may not fix all endian issues in this driver, but it does get the driver working on PowerPC for a PMC SRC card. So it should at least fix all the problems in the core and in the SRC support. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Cc: Adaptec OEM Raid Solutions <aacraid@adaptec.com Cc: linux-scsi@vger.kernel.org --- drivers/scsi/aacraid/comminit.c | 4 ++-- drivers/scsi/aacraid/src.c | 46 ++++++++++++++++++++++++--------------- 2 files changed, 31 insertions(+), 19 deletions(-)