diff mbox series

[SRU,OEM-5.17,07/10] platform/x86: serial-multi-instantiate: Add SPI support

Message ID 20220420094132.7732-8-hui.wang@canonical.com
State New
Headers show
Series alsa: enable the cirrus-logic side-codec to make the speaker output sound | expand

Commit Message

Hui Wang April 20, 2022, 9:41 a.m. UTC
From: Stefan Binding <sbinding@opensource.cirrus.com>

BugLink: https://bugs.launchpad.net/bugs/1965496

Add support for spi bus in serial-multi-instantiate driver

Some peripherals can have either a I2C or a SPI connection
to the host (but not both) but use the same HID for both
types. So it is not possible to use the HID to determine
whether it is I2C or SPI. The driver must check the node
to see if it contains I2cSerialBus or SpiSerialBus entries.

For backwards-compatibility with the existing nodes I2C is
checked first and if such entries are found ONLY I2C devices
are created. Since some existing nodes that were already
handled by this driver could also contain unrelated
SpiSerialBus nodes that were previously ignored, and this
preserves that behavior. If there is ever a need to handle
a node where both I2C and SPI devices must be instantiated
this can be added in future.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220121172431.6876-8-sbinding@opensource.cirrus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 68f201f9061c000d7a4a9f359f021b1cd535d62b)
Signed-off-by: Hui Wang <hui.wang@canonical.com>
---
 drivers/platform/x86/Kconfig                  |   2 +-
 .../platform/x86/serial-multi-instantiate.c   | 173 +++++++++++++++---
 2 files changed, 150 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 53c2cde229cf..87ae55aed8df 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1006,7 +1006,7 @@  config TOPSTAR_LAPTOP
 
 config SERIAL_MULTI_INSTANTIATE
 	tristate "Serial bus multi instantiate pseudo device driver"
-	depends on I2C && ACPI
+	depends on I2C && SPI && ACPI
 	help
 	  Some ACPI-based systems list multiple devices in a single ACPI
 	  firmware-node. This driver will instantiate separate clients
diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
index 1eb29bec405f..e2fd73905312 100644
--- a/drivers/platform/x86/serial-multi-instantiate.c
+++ b/drivers/platform/x86/serial-multi-instantiate.c
@@ -14,6 +14,7 @@ 
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
+#include <linux/spi/spi.h>
 #include <linux/types.h>
 
 #define IRQ_RESOURCE_TYPE	GENMASK(1, 0)
@@ -21,15 +22,28 @@ 
 #define IRQ_RESOURCE_GPIO	1
 #define IRQ_RESOURCE_APIC	2
 
+enum smi_bus_type {
+	SMI_I2C,
+	SMI_SPI,
+	SMI_AUTO_DETECT,
+};
+
 struct smi_instance {
 	const char *type;
 	unsigned int flags;
 	int irq_idx;
 };
 
+struct smi_node {
+	enum smi_bus_type bus_type;
+	struct smi_instance instances[];
+};
+
 struct smi {
 	int i2c_num;
+	int spi_num;
 	struct i2c_client **i2c_devs;
+	struct spi_device **spi_devs;
 };
 
 static int smi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
@@ -59,6 +73,94 @@  static void smi_devs_unregister(struct smi *smi)
 {
 	while (smi->i2c_num > 0)
 		i2c_unregister_device(smi->i2c_devs[--smi->i2c_num]);
+
+	while (smi->spi_num > 0)
+		spi_unregister_device(smi->spi_devs[--smi->spi_num]);
+}
+
+/**
+ * smi_spi_probe - Instantiate multiple SPI devices from inst array
+ * @pdev:	Platform device
+ * @adev:	ACPI device
+ * @smi:	Internal struct for Serial multi instantiate driver
+ * @inst_array:	Array of instances to probe
+ *
+ * Returns the number of SPI devices instantiate, Zero if none is found or a negative error code.
+ */
+static int smi_spi_probe(struct platform_device *pdev, struct acpi_device *adev, struct smi *smi,
+			 const struct smi_instance *inst_array)
+{
+	struct device *dev = &pdev->dev;
+	struct spi_controller *ctlr;
+	struct spi_device *spi_dev;
+	char name[50];
+	int i, ret, count;
+
+	ret = acpi_spi_count_resources(adev);
+	if (ret < 0)
+		return ret;
+	else if (!ret)
+		return -ENODEV;
+
+	count = ret;
+
+	smi->spi_devs = devm_kcalloc(dev, count, sizeof(*smi->spi_devs), GFP_KERNEL);
+	if (!smi->spi_devs)
+		return -ENOMEM;
+
+	for (i = 0; i < count && inst_array[i].type; i++) {
+
+		spi_dev = acpi_spi_device_alloc(NULL, adev, i);
+		if (IS_ERR(spi_dev)) {
+			ret = PTR_ERR(spi_dev);
+			dev_err_probe(dev, ret, "failed to allocate SPI device %s from ACPI: %d\n",
+				      dev_name(&adev->dev), ret);
+			goto error;
+		}
+
+		ctlr = spi_dev->controller;
+
+		strscpy(spi_dev->modalias, inst_array[i].type, sizeof(spi_dev->modalias));
+
+		ret = smi_get_irq(pdev, adev, &inst_array[i]);
+		if (ret < 0) {
+			spi_dev_put(spi_dev);
+			goto error;
+		}
+		spi_dev->irq = ret;
+
+		snprintf(name, sizeof(name), "%s-%s-%s.%d", dev_name(&ctlr->dev), dev_name(dev),
+			 inst_array[i].type, i);
+		spi_dev->dev.init_name = name;
+
+		ret = spi_add_device(spi_dev);
+		if (ret) {
+			dev_err_probe(&ctlr->dev, ret,
+				      "failed to add SPI device %s from ACPI: %d\n",
+				      dev_name(&adev->dev), ret);
+			spi_dev_put(spi_dev);
+			goto error;
+		}
+
+		dev_dbg(dev, "SPI device %s using chip select %u", name, spi_dev->chip_select);
+
+		smi->spi_devs[i] = spi_dev;
+		smi->spi_num++;
+	}
+
+	if (smi->spi_num < count) {
+		dev_dbg(dev, "Error finding driver, idx %d\n", i);
+		ret = -ENODEV;
+		goto error;
+	}
+
+	dev_info(dev, "Instantiated %d SPI devices.\n", smi->spi_num);
+
+	return 0;
+error:
+	smi_devs_unregister(smi);
+
+	return ret;
 }
 
 /**
@@ -126,8 +228,8 @@  static int smi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev,
 
 static int smi_probe(struct platform_device *pdev)
 {
-	const struct smi_instance *inst_array;
 	struct device *dev = &pdev->dev;
+	const struct smi_node *node;
 	struct acpi_device *adev;
 	struct smi *smi;
 
@@ -135,8 +237,8 @@  static int smi_probe(struct platform_device *pdev)
 	if (!adev)
 		return -ENODEV;
 
-	inst_array = device_get_match_data(dev);
-	if (!inst_array) {
+	node = device_get_match_data(dev);
+	if (!node) {
 		dev_dbg(dev, "Error ACPI match data is missing\n");
 		return -ENODEV;
 	}
@@ -147,7 +249,21 @@  static int smi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, smi);
 
-	return smi_i2c_probe(pdev, adev, smi, inst_array);
+	switch (node->bus_type) {
+	case SMI_I2C:
+		return smi_i2c_probe(pdev, adev, smi, node->instances);
+	case SMI_SPI:
+		return smi_spi_probe(pdev, adev, smi, node->instances);
+	case SMI_AUTO_DETECT:
+		if (i2c_acpi_client_count(adev) > 0)
+			return smi_i2c_probe(pdev, adev, smi, node->instances);
+		else
+			return smi_spi_probe(pdev, adev, smi, node->instances);
+	default:
+		return -EINVAL;
+	}
+
+	return 0; /* never reached */
 }
 
 static int smi_remove(struct platform_device *pdev)
@@ -159,27 +275,36 @@  static int smi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct smi_instance bsg1160_data[]  = {
-	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
-	{ "bmc150_magn" },
-	{ "bmg160" },
-	{}
+static const struct smi_node bsg1160_data = {
+	.instances = {
+		{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
+		{ "bmc150_magn" },
+		{ "bmg160" },
+		{}
+	},
+	.bus_type = SMI_I2C,
 };
 
-static const struct smi_instance bsg2150_data[]  = {
-	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
-	{ "bmc150_magn" },
-	/* The resources describe a 3th client, but it is not really there. */
-	{ "bsg2150_dummy_dev" },
-	{}
+static const struct smi_node bsg2150_data = {
+	.instances = {
+		{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
+		{ "bmc150_magn" },
+		/* The resources describe a 3th client, but it is not really there. */
+		{ "bsg2150_dummy_dev" },
+		{}
+	},
+	.bus_type = SMI_I2C,
 };
 
-static const struct smi_instance int3515_data[]  = {
-	{ "tps6598x", IRQ_RESOURCE_APIC, 0 },
-	{ "tps6598x", IRQ_RESOURCE_APIC, 1 },
-	{ "tps6598x", IRQ_RESOURCE_APIC, 2 },
-	{ "tps6598x", IRQ_RESOURCE_APIC, 3 },
-	{}
+static const struct smi_node int3515_data = {
+	.instances = {
+		{ "tps6598x", IRQ_RESOURCE_APIC, 0 },
+		{ "tps6598x", IRQ_RESOURCE_APIC, 1 },
+		{ "tps6598x", IRQ_RESOURCE_APIC, 2 },
+		{ "tps6598x", IRQ_RESOURCE_APIC, 3 },
+		{}
+	},
+	.bus_type = SMI_I2C,
 };
 
 /*
@@ -187,9 +312,9 @@  static const struct smi_instance int3515_data[]  = {
  * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
  */
 static const struct acpi_device_id smi_acpi_ids[] = {
-	{ "BSG1160", (unsigned long)bsg1160_data },
-	{ "BSG2150", (unsigned long)bsg2150_data },
-	{ "INT3515", (unsigned long)int3515_data },
+	{ "BSG1160", (unsigned long)&bsg1160_data },
+	{ "BSG2150", (unsigned long)&bsg2150_data },
+	{ "INT3515", (unsigned long)&int3515_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, smi_acpi_ids);