diff mbox series

[04/33,SRU,OEM-5.13] ath11k: setup WBM_IDLE_LINK ring once again

Message ID 20211019162548.1408217-5-vicamo.yang@canonical.com
State New
Headers show
Series Support Qualcomm WCN685x | expand

Commit Message

You-Sheng Yang Oct. 19, 2021, 4:25 p.m. UTC 
From: Baochen Qiang <bqiang@codeaurora.org>

BugLink: https://bugs.launchpad.net/bugs/1939528

For WCN6855, WBM idle link ring needs a reinit.
Without this reinit, firmware crash might happen occasionally.
This is requested by the hw team.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511162214.29475-5-jouni@codeaurora.org
(cherry picked from commit ed66849e159ba92a91ccde13ce3aebd90c644e05)
Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
---
 drivers/net/wireless/ath/ath11k/hal.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
index 08e3c72d9237e..eaa0edca55761 100644
--- a/drivers/net/wireless/ath/ath11k/hal.c
+++ b/drivers/net/wireless/ath/ath11k/hal.c
@@ -382,6 +382,16 @@  static void ath11k_hal_srng_src_hw_init(struct ath11k_base *ab,
 	val = FIELD_PREP(HAL_REO1_RING_ID_ENTRY_SIZE, srng->entry_size);
 	ath11k_hif_write32(ab, reg_base + HAL_TCL1_RING_ID_OFFSET(ab), val);
 
+	if (srng->ring_id == HAL_SRNG_RING_ID_WBM_IDLE_LINK) {
+		ath11k_hif_write32(ab, reg_base, (u32)srng->ring_base_paddr);
+		val = FIELD_PREP(HAL_TCL1_RING_BASE_MSB_RING_BASE_ADDR_MSB,
+				 ((u64)srng->ring_base_paddr >>
+				 HAL_ADDR_MSB_REG_SHIFT)) |
+			FIELD_PREP(HAL_TCL1_RING_BASE_MSB_RING_SIZE,
+				   (srng->entry_size * srng->num_entries));
+		ath11k_hif_write32(ab, reg_base + HAL_TCL1_RING_BASE_MSB_OFFSET(ab), val);
+	}
+
 	/* interrupt setup */
 	/* NOTE: IPQ8074 v2 requires the interrupt timer threshold in the
 	 * unit of 8 usecs instead of 1 usec (as required by v1).