Series |
Support Qualcomm QCA6390 via ath11k driver
|
expand
-
[000/379,SRU,OEM-5.6] Support Qualcomm QCA6390 via ath11k driver
-
[001/379,SRU,OEM-5.6] Bluetooth: btusb: Add flag to define wideband speech capability
-
[002/379,SRU,OEM-5.6] Bluetooth: Support querying for WBS support through MGMT
-
[003/379,SRU,OEM-5.6] Bluetooth: Enable erroneous data reporting if WBS is supported
-
[004/379,SRU,OEM-5.6] Bluetooth: Increment management interface revision
-
[005/379,SRU,OEM-5.6] Bluetooth: fix off by one in err_data_reporting cmd masks.
-
[006/379,SRU,OEM-5.6] Bluetooth: mgmt: add mgmt_cmd_status in add_advertising
-
[007/379,SRU,OEM-5.6] mac80211: add 802.11 encapsulation offloading support
-
[008/379,SRU,OEM-5.6] mac80211: fix tx status for no ack cases
-
[009/379,SRU,OEM-5.6] nl80211: add handling for BSS color
-
[010/379,SRU,OEM-5.6] mac80211: add handling for BSS color
-
[011/379,SRU,OEM-5.6] mac80211: allow setting queue_len for drivers not using wake_tx_queue
-
[012/379,SRU,OEM-5.6] Bluetooth: hci_qca: Enable clocks required for BT SOC
-
[013/379,SRU,OEM-5.6] Bluetooth: hci_qca: Optimized code while enabling clocks for BT SOC
-
[014/379,SRU,OEM-5.6] mac80211: fix 11w when using encapsulation offloading
-
[015/379,SRU,OEM-5.6] ath11k: Silence clang -Wsometimes-uninitialized in ath11k_update_per_peer_sta…
-
[016/379,SRU,OEM-5.6] ath11k: drop tx_info from ath11k_sta
-
[017/379,SRU,OEM-5.6] ath11k: add HE rate accounting to driver
-
[018/379,SRU,OEM-5.6] ath11k: fix rcu lock protect in peer assoc confirmation
-
[019/379,SRU,OEM-5.6] ath11k: fix warn-on in disassociation
-
[020/379,SRU,OEM-5.6] ath11k: fix parsing PPDU_CTRL type in pktlog
-
[021/379,SRU,OEM-5.6] ath11k: Fixing dangling pointer issue upon peer delete failure
-
[022/379,SRU,OEM-5.6] ath11k: fix incorrect peer stats counters update
-
[023/379,SRU,OEM-5.6] Bluetooth: hci_qca: Bug fixes while collecting controller memory dump
-
[024/379,SRU,OEM-5.6] net: qrtr: Migrate nameservice to kernel from userspace
-
[025/379,SRU,OEM-5.6] net: qrtr: Fix the local node ID as 1
-
[026/379,SRU,OEM-5.6] net: qrtr: fix spelling mistake "serivce" -> "service"
-
[027/379,SRU,OEM-5.6] net: qrtr: Fix error pointer vs NULL bugs
-
[028/379,SRU,OEM-5.6] Bluetooth: Replace zero-length array with flexible-array member
-
[029/379,SRU,OEM-5.6] Bluetooth: hci_qca: Not send vendor pre-shutdown command for QCA Rome
-
[030/379,SRU,OEM-5.6] Bluetooth: btqca: Fix the NVM baudrate tag offcet for wcn3991
-
[031/379,SRU,OEM-5.6] net: qrtr: Respond to HELLO message
-
[032/379,SRU,OEM-5.6] net: qrtr: Fix FIXME related to qrtr_ns_init()
-
[033/379,SRU,OEM-5.6] soc: qcom: Do not depend on ARCH_QCOM for QMI helpers
-
[034/379,SRU,OEM-5.6] Bluetooth: hci_qca: Make bt_en and susclk not mandatory for QCA Rome
-
[035/379,SRU,OEM-5.6] Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()
-
[036/379,SRU,OEM-5.6] ath11k: config reorder queue for all tids during peer setup
-
[037/379,SRU,OEM-5.6] ath11k: add thermal cooling device support
-
[038/379,SRU,OEM-5.6] ath11k: add thermal sensor device support
-
[039/379,SRU,OEM-5.6] ath11k: Use scnprintf() for avoiding potential buffer overflow
-
[040/379,SRU,OEM-5.6] ath11k: handle RX fragments
-
[041/379,SRU,OEM-5.6] ath11k: enable PN offload
-
[042/379,SRU,OEM-5.6] ath11k: set queue_len to 4096
-
[043/379,SRU,OEM-5.6] ath11k: add WMI calls required for handling BSS color
-
[044/379,SRU,OEM-5.6] ath11k: add handling for BSS color
-
[045/379,SRU,OEM-5.6] ath11k: Supporting RX ring backpressure HTT event and stats handling
-
[046/379,SRU,OEM-5.6] ath11k: fill channel info from rx channel
-
[047/379,SRU,OEM-5.6] ath11k: dump SRNG stats during FW assert
-
[048/379,SRU,OEM-5.6] ath11k: Adding proper validation before accessing tx_stats
-
[049/379,SRU,OEM-5.6] ath11k: Configure hash based reo destination ring selection
-
[050/379,SRU,OEM-5.6] ath11k: Perform per-msdu rx processing
-
[051/379,SRU,OEM-5.6] cfg80211: fix kernel-doc notation
-
[052/379,SRU,OEM-5.6] bus: mhi: core: Add support for registering MHI controllers
-
[053/379,SRU,OEM-5.6] bus: mhi: core: Add support for registering MHI client drivers
-
[054/379,SRU,OEM-5.6] bus: mhi: core: Add support for creating and destroying MHI devices
-
[055/379,SRU,OEM-5.6] bus: mhi: core: Add support for ringing channel/event ring doorbells
-
[056/379,SRU,OEM-5.6] bus: mhi: core: Add support for PM state transitions
-
[057/379,SRU,OEM-5.6] bus: mhi: core: Add support for basic PM operations
-
[058/379,SRU,OEM-5.6] bus: mhi: core: Add support for downloading firmware over BHIe
-
[059/379,SRU,OEM-5.6] bus: mhi: core: Add support for downloading RDDM image during panic
-
[060/379,SRU,OEM-5.6] bus: mhi: core: Add support for processing events from client device
-
[061/379,SRU,OEM-5.6] bus: mhi: core: Add support for data transfer
-
[062/379,SRU,OEM-5.6] bus: mhi: core: Add uevent support for module autoloading
-
[063/379,SRU,OEM-5.6] MAINTAINERS: Add entry for MHI bus
-
[064/379,SRU,OEM-5.6] bus/mhi: fix printk format for size_t
-
[065/379,SRU,OEM-5.6] bus: mhi: core: Pass module owner during client driver registration
-
[066/379,SRU,OEM-5.6] bus: mhi: core: Add support for reading MHI info from device
-
[067/379,SRU,OEM-5.6] bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
-
[068/379,SRU,OEM-5.6] bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
-
[069/379,SRU,OEM-5.6] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390
-
[070/379,SRU,OEM-5.6] ath11k: fix compiler warnings without CONFIG_THERMAL
-
[071/379,SRU,OEM-5.6] ath11k: Add sta debugfs support to configure ADDBA and DELBA
-
[072/379,SRU,OEM-5.6] ath11k: add pktlog checksum in trace events to support pktlog
-
[073/379,SRU,OEM-5.6] ath11k: fix error message to correctly report the command that failed
-
[074/379,SRU,OEM-5.6] ath11k: Increase the tx completion ring size
-
[075/379,SRU,OEM-5.6] ath11k: Avoid mgmt tx count underflow
-
[076/379,SRU,OEM-5.6] ath11k: fix duplication peer create on same radio
-
[077/379,SRU,OEM-5.6] ath11k: Modify the interrupt timer threshold
-
[078/379,SRU,OEM-5.6] ath11k: Fix TWT radio count
-
[079/379,SRU,OEM-5.6] ath11k: set IRQ_DISABLE_UNLAZY flag for DP interrupts
-
[080/379,SRU,OEM-5.6] ath11k: rx path optimizations
-
[081/379,SRU,OEM-5.6] ath11k: Cleanup in pdev destroy and mac register during crash on recovery
-
[082/379,SRU,OEM-5.6] ath11k: Fix fw assert by setting proper vht cap
-
[083/379,SRU,OEM-5.6] ath11k: Fix rx_filter flags setting for per peer rx_stats
-
[084/379,SRU,OEM-5.6] ath11k: cleanup reo command error code overwritten
-
[085/379,SRU,OEM-5.6] ath11k: Add dynamic tcl ring selection logic with retry mechanism
-
[086/379,SRU,OEM-5.6] ath11k: remove conversion to bool in ath11k_dp_rxdesc_mpdu_valid()
-
[087/379,SRU,OEM-5.6] ath11k: remove conversion to bool in ath11k_debug_fw_stats_process()
-
[088/379,SRU,OEM-5.6] net: qrtr: Add tracepoint support
-
[089/379,SRU,OEM-5.6] mac80211: fix two missing documentation entries
-
[090/379,SRU,OEM-5.6] ath11k: fix reo flush send
-
[091/379,SRU,OEM-5.6] ath11k: use GFP_ATOMIC under spin lock
-
[092/379,SRU,OEM-5.6] Bluetooth: hci_qca: add compatible for QCA9377
-
[093/379,SRU,OEM-5.6] Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices
-
[094/379,SRU,OEM-5.6] bus: mhi: core: Add support for MHI suspend and resume
-
[095/379,SRU,OEM-5.6] bus: mhi: core: Fix a NULL vs IS_ERR check in mhi_create_devices()
-
[096/379,SRU,OEM-5.6] mac80211: fix memory overlap due to variable length param
-
[097/379,SRU,OEM-5.6] ath11k: fix error return code in ath11k_dp_alloc()
-
[098/379,SRU,OEM-5.6] ath11k: fix mgmt_tx_wmi cmd sent to FW for deleted vdev
-
[099/379,SRU,OEM-5.6] ath11k: add DBG_MAC prints to track vdev events
-
[100/379,SRU,OEM-5.6] ath11k: use true, false for bool variables
-
[101/379,SRU,OEM-5.6] ath11k: fix resource unavailability for htt stats after peer stats display
-
[102/379,SRU,OEM-5.6] bus: mhi: core: Make sure to powerdown if mhi_sync_power_up fails
-
[103/379,SRU,OEM-5.6] bus: mhi: core: Remove link_status() callback
-
[104/379,SRU,OEM-5.6] bus: mhi: core: Offload register accesses to the controller
-
[105/379,SRU,OEM-5.6] bus: mhi: core: Fix channel device name conflict
-
[106/379,SRU,OEM-5.6] ath11k: add tx hw 802.11 encapsulation offloading support
-
[107/379,SRU,OEM-5.6] ath11k: Add support to reset htt peer stats
-
[108/379,SRU,OEM-5.6] ath11k: fix kernel panic by freeing the msdu received with invalid length
-
[109/379,SRU,OEM-5.6] ath11k: Replace zero-length array with flexible-array
-
[110/379,SRU,OEM-5.6] net: qrtr: Add MHI transport layer
-
[111/379,SRU,OEM-5.6] net: qrtr: Do not depend on ARCH_QCOM
-
[112/379,SRU,OEM-5.6] ath11k: remove stale monitor status descriptor
-
[113/379,SRU,OEM-5.6] ath11k: Add support for multibus support
-
[114/379,SRU,OEM-5.6] ath11k: Add drv private for bus opaque struct
-
[115/379,SRU,OEM-5.6] ath11k: Remove bus layer includes from upper layer
-
[116/379,SRU,OEM-5.6] ath11k: remove redundant initialization of pointer info
-
[117/379,SRU,OEM-5.6] ath11k: convert to devm_platform_get_and_ioremap_resource
-
[118/379,SRU,OEM-5.6] ath11k: fix htt stats module not handle multiple skbs
-
[119/379,SRU,OEM-5.6] bus: mhi: core: Fix some error return code
-
[120/379,SRU,OEM-5.6] Bluetooth: hci_qca: Enable WBS support for wcn3991
-
[121/379,SRU,OEM-5.6] ath11k: Fix some resource leaks in error path in 'ath11k_thermal_register()'
-
[122/379,SRU,OEM-5.6] Bluetooth: hci_qca: Fix uninitialized access to hdev
-
[123/379,SRU,OEM-5.6] bus: mhi: core: Refactor mhi queue APIs
-
[124/379,SRU,OEM-5.6] bus: mhi: core: Cache intmod from mhi event to mhi channel
-
[125/379,SRU,OEM-5.6] bus: mhi: core: Add range check for channel id received in event ring
-
[126/379,SRU,OEM-5.6] bus: mhi: core: Read transfer length from an event properly
-
[127/379,SRU,OEM-5.6] bus: mhi: core: Handle firmware load using state worker
-
[128/379,SRU,OEM-5.6] bus: mhi: core: Return appropriate error codes for AMSS load failure
-
[129/379,SRU,OEM-5.6] bus: mhi: core: Improve debug logs for loading firmware
-
[130/379,SRU,OEM-5.6] bus: mhi: core: Ensure non-zero session or sequence ID values are used
-
[131/379,SRU,OEM-5.6] bus: mhi: core: Remove the system error worker thread
-
[132/379,SRU,OEM-5.6] bus: mhi: core: Handle disable transitions in state worker
-
[133/379,SRU,OEM-5.6] bus: mhi: core: Skip handling BHI irq if MHI reg access is not allowed
-
[134/379,SRU,OEM-5.6] bus: mhi: core: Do not process SYS_ERROR if RDDM is supported
-
[135/379,SRU,OEM-5.6] bus: mhi: core: Handle write lock properly in mhi_pm_m0_transition
-
[136/379,SRU,OEM-5.6] bus: mhi: core: Handle syserr during power_up
-
[137/379,SRU,OEM-5.6] Bluetooth: hci_qca: Fix suspend/resume functionality failure
-
[138/379,SRU,OEM-5.6] Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot
-
[139/379,SRU,OEM-5.6] ath11k: reset trigger frame MAC padding duration
-
[140/379,SRU,OEM-5.6] ath11k: clear DCM max constellation tx value
-
[141/379,SRU,OEM-5.6] net: qrtr: Allocate workqueue before kernel_bind
-
[142/379,SRU,OEM-5.6] Bluetooth: hci_qca: Improve controller ID info log level
-
[143/379,SRU,OEM-5.6] Bluetooth: hci_qca: Fix QCA6390 memdump failure
-
[144/379,SRU,OEM-5.6] Bluetooth: hci_qca: Fix an error pointer dereference
-
[145/379,SRU,OEM-5.6] Bluetooth: hci_qca: Simplify determination of serial clock on/off state from …
-
[146/379,SRU,OEM-5.6] Bluetooth: hci_qca: Only remove TX clock vote after TX is completed
-
[147/379,SRU,OEM-5.6] Bluetooth: hci_qca: Skip serdev wait when no transfer is pending
-
[148/379,SRU,OEM-5.6] Bluetooth: hci_qca: Refactor error handling in qca_suspend()
-
[149/379,SRU,OEM-5.6] Bluetooth: hci_qca: Bug fix during SSR timeout
-
[150/379,SRU,OEM-5.6] cfg80211: add a helper to identify 6 GHz PSCs
-
[151/379,SRU,OEM-5.6] ieee80211: definitions for reduced neighbor reports
-
[152/379,SRU,OEM-5.6] ieee80211: add code to obtain and parse 6 GHz operation field
-
[153/379,SRU,OEM-5.6] ieee80211: add HE ext EIDs and 6 GHz capability defines
-
[154/379,SRU,OEM-5.6] cfg80211: handle 6 GHz capability of new station
-
[155/379,SRU,OEM-5.6] mac80211: refactor extended element parsing
-
[156/379,SRU,OEM-5.6] mac80211: add HE 6 GHz Band Capabilities into parse extension
-
[157/379,SRU,OEM-5.6] cfg80211: add and expose HE 6 GHz band capabilities
-
[158/379,SRU,OEM-5.6] mac80211: add HE 6 GHz Band Capability element
-
[159/379,SRU,OEM-5.6] mac80211: build HE operation with 6 GHz oper information
-
[160/379,SRU,OEM-5.6] mac80211: do not allow HT/VHT IEs in 6 GHz mesh mode
-
[161/379,SRU,OEM-5.6] mac80211: avoid using ext NSS high BW if not supported
-
[162/379,SRU,OEM-5.6] mac80211: simplify and improve HT/VHT/HE disable code
-
[163/379,SRU,OEM-5.6] mac80211: determine chandef from HE 6 GHz operation
-
[164/379,SRU,OEM-5.6] mac80211: check the correct bit for EMA AP
-
[165/379,SRU,OEM-5.6] mac80211: use HE 6 GHz band capability and pass it to the driver
-
[166/379,SRU,OEM-5.6] mac80211: Add HE 6GHz capabilities element to probe request
-
[167/379,SRU,OEM-5.6] cfg80211: treat 6 GHz channels as valid regardless of capability
-
[168/379,SRU,OEM-5.6] cfg80211: reject HT/VHT capabilities on 6 GHz band
-
[169/379,SRU,OEM-5.6] cfg80211: require HE capabilities for 6 GHz band
-
[170/379,SRU,OEM-5.6] mac80211: accept aggregation sessions on 6 GHz
-
[171/379,SRU,OEM-5.6] mac80211: Consider 6 GHz band when handling power constraint
-
[172/379,SRU,OEM-5.6] mac80211: set short_slot for 6 GHz band
-
[173/379,SRU,OEM-5.6] ath11k: add 6G frequency list supported by driver
-
[174/379,SRU,OEM-5.6] ath11k: add support for 6GHz radio in driver
-
[175/379,SRU,OEM-5.6] ath11k: Use freq instead of channel number in rx path
-
[176/379,SRU,OEM-5.6] ath11k: extend peer_assoc_cmd for 6GHz band
-
[177/379,SRU,OEM-5.6] ath11k: set psc channel flag when sending channel list to firmware.
-
[178/379,SRU,OEM-5.6] ath11k: Add 6G scan dwell time parameter in scan request command
-
[179/379,SRU,OEM-5.6] ath11k: Send multiple scan_chan_list messages if required
-
[180/379,SRU,OEM-5.6] ath11k: Add support for 6g scan hint
-
[181/379,SRU,OEM-5.6] ath11k: build HE 6 GHz capability
-
[182/379,SRU,OEM-5.6] Bluetooth: hci_qca: Disable SoC debug logging for WCN3991
-
[183/379,SRU,OEM-5.6] Bluetooth: hci_qca: Increase SoC idle timeout to 200ms
-
[184/379,SRU,OEM-5.6] Bluetooth: hci_qca: Request Tx clock vote off only when Tx is pending
-
[185/379,SRU,OEM-5.6] ath11k: Add direct buffer ring support
-
[186/379,SRU,OEM-5.6] ath11k: add support for spectral scan
-
[187/379,SRU,OEM-5.6] ath11k: removing redundant reo unlock followed by immediate lock
-
[188/379,SRU,OEM-5.6] ath11k: Add dp tx err stats
-
[189/379,SRU,OEM-5.6] ath11k: Add support for ring backpressure stats
-
[190/379,SRU,OEM-5.6] ath11k: fix wmi peer flags in peer assoc command
-
[191/379,SRU,OEM-5.6] nl80211: pass HE operation element to the driver
-
[192/379,SRU,OEM-5.6] mac80211: HE: set missing bss_conf fields in AP mode
-
[193/379,SRU,OEM-5.6] cfg80211/mac80211: avoid bss color setting in non-HE modes
-
[194/379,SRU,OEM-5.6] ath11k: update firmware files read path
-
[195/379,SRU,OEM-5.6] ath11k: rename default board file
-
[196/379,SRU,OEM-5.6] ath11k: ahb: call ath11k_core_init() before irq configuration
-
[197/379,SRU,OEM-5.6] ath11k: convert ath11k_hw_params to an array
-
[198/379,SRU,OEM-5.6] ath11k: define max_radios in hw_params
-
[199/379,SRU,OEM-5.6] ath11k: add hw_ops for pdev id to hw_mac mapping
-
[200/379,SRU,OEM-5.6] ath11k: Add bdf-addr in hw_params
-
[201/379,SRU,OEM-5.6] ath11k: create a common function to request all firmware files
-
[202/379,SRU,OEM-5.6] ath11k: don't use defines for hw specific firmware directories
-
[203/379,SRU,OEM-5.6] ath11k: change ath11k_core_fetch_board_data_api_n() to use ath11k_core_create…
-
[204/379,SRU,OEM-5.6] ath11k: remove useless info messages
-
[205/379,SRU,OEM-5.6] ath11k: qmi: cleanup info messages
-
[206/379,SRU,OEM-5.6] ath11k: don't use defines in hw_params
-
[207/379,SRU,OEM-5.6] ath11k: remove define ATH11K_QMI_DEFAULT_CAL_FILE_NAME
-
[208/379,SRU,OEM-5.6] net: qrtr: free flow in __qrtr_node_release
-
[209/379,SRU,OEM-5.6] net: qrtr: Fix an out of bounds read qrtr_endpoint_post()
-
[210/379,SRU,OEM-5.6] Bluetooth: hci_qca: Bug fixes for SSR
-
[211/379,SRU,OEM-5.6] qrtr: orphan socket in qrtr_release()
-
[212/379,SRU,OEM-5.6] Bluetooth: hci_qca: Stop collecting memdump again for command timeout during …
-
[213/379,SRU,OEM-5.6] cfg80211: invert HE BSS color 'disabled' to 'enabled'
-
[214/379,SRU,OEM-5.6] ath11k: do not depend on ARCH_QCOM for ath11k
-
[215/379,SRU,OEM-5.6] ath11k: add hw_params entry for QCA6390
-
[216/379,SRU,OEM-5.6] ath11k: move ring mask definitions to hw_params
-
[217/379,SRU,OEM-5.6] ath11k: add simple PCI client driver for QCA6390 chipset
-
[218/379,SRU,OEM-5.6] ath11k: pci: setup resources
-
[219/379,SRU,OEM-5.6] ath11k: pci: add MSI config initialisation
-
[220/379,SRU,OEM-5.6] ath11k: implement ath11k_core_pre_init()
-
[221/379,SRU,OEM-5.6] ath11k: register MHI controller device for QCA6390
-
[222/379,SRU,OEM-5.6] ath11k: pci: add HAL, CE and core initialisation
-
[223/379,SRU,OEM-5.6] ath11k: use remoteproc only with AHB devices
-
[224/379,SRU,OEM-5.6] ath11k: add support for m3 firmware
-
[225/379,SRU,OEM-5.6] ath11k: add board file support for PCI devices
-
[226/379,SRU,OEM-5.6] ath11k: fill appropriate QMI service instance id for QCA6390
-
[227/379,SRU,OEM-5.6] ath11k: pci: add read32() and write32() hif operations
-
[228/379,SRU,OEM-5.6] ath11k: configure copy engine msi address in CE srng
-
[229/379,SRU,OEM-5.6] ath11k: setup ce tasklet for control path
-
[230/379,SRU,OEM-5.6] ath11k: allocate smaller chunks of memory for firmware
-
[231/379,SRU,OEM-5.6] ath11k: fix memory OOB access in qmi_decode
-
[232/379,SRU,OEM-5.6] ath11k: fix KASAN warning of ath11k_qmi_wlanfw_wlan_cfg_send
-
[233/379,SRU,OEM-5.6] ath11k: enable internal sleep clock
-
[234/379,SRU,OEM-5.6] ath11k: hal: create hw_srng_config dynamically
-
[235/379,SRU,OEM-5.6] net: qrtr: fix usage of idr in port assignment to socket
-
[236/379,SRU,OEM-5.6] ath11k: hal: create register values dynamically
-
[237/379,SRU,OEM-5.6] ath11k: hal: cleanup dynamic register macros
-
[238/379,SRU,OEM-5.6] ath11k: ce: support different CE configurations
-
[239/379,SRU,OEM-5.6] ath11k: ce: remove host_ce_config_wlan macro
-
[240/379,SRU,OEM-5.6] ath11k: ce: remove CE_COUNT() macro
-
[241/379,SRU,OEM-5.6] ath11k: hal: assign msi_addr and msi_data to srng
-
[242/379,SRU,OEM-5.6] ath11k: ce: get msi_addr and msi_data before srng setup
-
[243/379,SRU,OEM-5.6] ath11k: disable CE interrupt before hif start
-
[244/379,SRU,OEM-5.6] ath11k: force single pdev only for QCA6390
-
[245/379,SRU,OEM-5.6] ath11k: initialize wmi config based on hw_params
-
[246/379,SRU,OEM-5.6] ath11k: wmi: put hardware to DBS mode
-
[247/379,SRU,OEM-5.6] ath11k: dp: redefine peer_map and peer_unmap
-
[248/379,SRU,OEM-5.6] ath11k: enable DP interrupt setup for QCA6390
-
[249/379,SRU,OEM-5.6] ath11k: don't initialize rxdma1 related ring
-
[250/379,SRU,OEM-5.6] ath11k: setup QCA6390 rings for both rxdmas
-
[251/379,SRU,OEM-5.6] ath11k: refine the phy_id check in ath11k_reg_chan_list_event
-
[252/379,SRU,OEM-5.6] ath11k: delay vdev_start for QCA6390
-
[253/379,SRU,OEM-5.6] ath11k: assign correct search flag and type for QCA6390
-
[254/379,SRU,OEM-5.6] ath11k: process both lmac rings for QCA6390
-
[255/379,SRU,OEM-5.6] ath11k: use TCL_DATA_RING_0 for QCA6390
-
[256/379,SRU,OEM-5.6] ath11k: reset MHI during power down and power up
-
[257/379,SRU,OEM-5.6] ath11k: Fix possible memleak in ath11k_qmi_init_service
-
[258/379,SRU,OEM-5.6] ath11k: Use fallthrough pseudo-keyword
-
[259/379,SRU,OEM-5.6] net: ath11k: constify ath11k_thermal_ops
-
[260/379,SRU,OEM-5.6] ath11k: return error if firmware request fails
-
[261/379,SRU,OEM-5.6] ath11k: return -ENOMEM on allocation failure
-
[262/379,SRU,OEM-5.6] mac80211: rename csa counters to countdown counters
-
[263/379,SRU,OEM-5.6] ath11k: convert tasklets to use new tasklet_setup() API
-
[264/379,SRU,OEM-5.6] ath11k: fix spelling mistake "moniter" -> "monitor"
-
[265/379,SRU,OEM-5.6] ath11k: fix missing error check on call to ath11k_pci_get_user_msi_assignment
-
[266/379,SRU,OEM-5.6] ath11k: fix a double free and a memory leak
-
[267/379,SRU,OEM-5.6] ath11k: fix uninitialized return in ath11k_spectral_process_data()
-
[268/379,SRU,OEM-5.6] mac80211: Add new AMPDU factor macro for HE peer caps
-
[269/379,SRU,OEM-5.6] ath11k: Add peer max mpdu parameter in peer assoc command
-
[270/379,SRU,OEM-5.6] net: qrtr: check skb_put_padto() return value
-
[271/379,SRU,OEM-5.6] Bluetooth: hci_qca: remove redundant null check
-
[272/379,SRU,OEM-5.6] Bluetooth: hci_qca: Remove duplicate power off in proto close
-
[273/379,SRU,OEM-5.6] ath11k: move target ce configs to hw_params
-
[274/379,SRU,OEM-5.6] ath11k: add ipq6018 support
-
[275/379,SRU,OEM-5.6] ath11k: add raw mode and software crypto support
-
[276/379,SRU,OEM-5.6] ath11k: remove calling ath11k_init_hw_params() second time
-
[277/379,SRU,OEM-5.6] ath11k: fix link error when CONFIG_REMOTEPROC is disabled
-
[278/379,SRU,OEM-5.6] ath11k: Remove unused inline function htt_htt_stats_debug_dump()
-
[279/379,SRU,OEM-5.6] mac80211: improve AQL tx airtime estimation
-
[280/379,SRU,OEM-5.6] mac80211: use rate provided via status->rate on ieee80211_tx_status_ext for A…
-
[281/379,SRU,OEM-5.6] nl80211: add ability to report TX status for control port TX
-
[282/379,SRU,OEM-5.6] mac80211: support control port TX status reporting
-
[283/379,SRU,OEM-5.6] mac80211: Fix bug in Tx ack status reporting in 802.3 xmit path
-
[284/379,SRU,OEM-5.6] mac80211: Fix dropping broadcast packets in 802.11 encap
-
[285/379,SRU,OEM-5.6] mac80211: reduce packet loss event false positives
-
[286/379,SRU,OEM-5.6] mac80211: add missing queue/hash initialization to 802.3 xmit
-
[287/379,SRU,OEM-5.6] mac80211: check and refresh aggregation session in encap offload tx
-
[288/379,SRU,OEM-5.6] mac80211: skip encap offload for tx multicast/control packets
-
[289/379,SRU,OEM-5.6] mac80211: set info->control.hw_key for encap offload packets
-
[290/379,SRU,OEM-5.6] mac80211: rework tx encapsulation offload API
-
[291/379,SRU,OEM-5.6] mac80211: reduce duplication in tx status functions
-
[292/379,SRU,OEM-5.6] mac80211: remove tx status call to ieee80211_sta_register_airtime
-
[293/379,SRU,OEM-5.6] mac80211: swap NEED_TXPROCESSING and HW_80211_ENCAP tx flags
-
[294/379,SRU,OEM-5.6] mac80211: notify the driver when a sta uses 4-address mode
-
[295/379,SRU,OEM-5.6] mac80211: optimize station connection monitor
-
[296/379,SRU,OEM-5.6] mac80211: unify 802.3 (offload) and 802.11 tx status codepath
-
[297/379,SRU,OEM-5.6] mac80211: support using ieee80211_tx_status_ext to free skbs without status i…
-
[298/379,SRU,OEM-5.6] mac80211: extend ieee80211_tx_status_ext to support bulk free
-
[299/379,SRU,OEM-5.6] mac80211: reorganize code to remove a forward declaration
-
[300/379,SRU,OEM-5.6] ath11k: Remove rproc references from common core layer
-
[301/379,SRU,OEM-5.6] ath11k: Add checked value for ath11k_ahb_remove
-
[302/379,SRU,OEM-5.6] ath11k: refactor debugfs code into debugfs.c
-
[303/379,SRU,OEM-5.6] ath11k: debugfs: use ath11k_debugfs_ prefix
-
[304/379,SRU,OEM-5.6] ath11k: rename debug_htt_stats.[c|h] to debugfs_htt_stats.[c|h]
-
[305/379,SRU,OEM-5.6] ath11k: debugfs: move some function declarations to correct header files
-
[306/379,SRU,OEM-5.6] ath11k: Add support spectral scan for IPQ6018
-
[307/379,SRU,OEM-5.6] ath11k: wmi: remove redundant configuration values from init
-
[308/379,SRU,OEM-5.6] ath11k: remove redundant num_keep_alive_pattern assignment
-
[309/379,SRU,OEM-5.6] ath11k: Remove unused function ath11k_htc_restore_tx_skb()
-
[310/379,SRU,OEM-5.6] ath11k: fix undefined reference to 'ath11k_debugfs_htt_ext_stats_handler'
-
[311/379,SRU,OEM-5.6] net: qrtr: ns: Protect radix_tree_deref_slot() using rcu read locks
-
[312/379,SRU,OEM-5.6] ath11k: Move non-fatal warn logs to dbg level
-
[313/379,SRU,OEM-5.6] ath11k: mac: fix parenthesis alignment
-
[314/379,SRU,OEM-5.6] ath11k: Correctly check errors for calls to debugfs_create_dir()
-
[315/379,SRU,OEM-5.6] ath11k: support loading ELF board files
-
[316/379,SRU,OEM-5.6] ath11k: fix AP mode for QCA6390
-
[317/379,SRU,OEM-5.6] ath11k: add interface_modes to hw_params
-
[318/379,SRU,OEM-5.6] ath11k: pci: check TCSR_SOC_HW_VERSION
-
[319/379,SRU,OEM-5.6] ath11k: disable monitor mode on QCA6390
-
[320/379,SRU,OEM-5.6] ath11k: change to disable softirqs for ath11k_regd_update to solve deadlock
-
[321/379,SRU,OEM-5.6] ath11k: Use GFP_ATOMIC instead of GFP_KERNEL in ath11k_dp_htt_get_ppdu_desc
-
[322/379,SRU,OEM-5.6] ath11k: Use GFP_ATOMIC instead of GFP_KERNEL in idr_alloc
-
[323/379,SRU,OEM-5.6] ath11k: add packet log support for QCA6390
-
[324/379,SRU,OEM-5.6] ath11k: pci: fix rmmod crash
-
[325/379,SRU,OEM-5.6] ath11k: mac: remove unused conf_mutex to solve a deadlock
-
[326/379,SRU,OEM-5.6] ath11k: fix warning caused by lockdep_assert_held
-
[327/379,SRU,OEM-5.6] ath11k: debugfs: fix crash during rmmod
-
[328/379,SRU,OEM-5.6] ath11k: read and write registers below unwindowed address
-
[329/379,SRU,OEM-5.6] ath11k: enable shadow register configuration and access
-
[330/379,SRU,OEM-5.6] ath11k: set WMI pipe credit to 1 for QCA6390
-
[331/379,SRU,OEM-5.6] ath11k: start a timer to update TCL HP
-
[332/379,SRU,OEM-5.6] ath11k: start a timer to update REO cmd ring
-
[333/379,SRU,OEM-5.6] ath11k: start a timer to update HP for CE pipe 4
-
[334/379,SRU,OEM-5.6] ath11k: enable idle power save mode
-
[335/379,SRU,OEM-5.6] ath11k: remove unnecessary casts to u32
-
[336/379,SRU,OEM-5.6] bus: mhi: core: Remove double occurrence for mhi_ctrl_ev_task() declaration
-
[337/379,SRU,OEM-5.6] bus: mhi: core: Abort suspends due to outgoing pending packets
-
[338/379,SRU,OEM-5.6] bus: mhi: core: Use helper API to trigger a non-blocking host resume
-
[339/379,SRU,OEM-5.6] bus: mhi: core: Trigger host resume if suspended during mhi_device_get()
-
[340/379,SRU,OEM-5.6] bus: mhi: core: Use generic name field for an MHI device
-
[341/379,SRU,OEM-5.6] bus: mhi: core: Introduce helper function to check device state
-
[342/379,SRU,OEM-5.6] bus: mhi: core: Introduce counters to track MHI device state transitions
-
[343/379,SRU,OEM-5.6] bus: mhi: core: Read and save device hardware information from BHI
-
[344/379,SRU,OEM-5.6] bus: mhi: core: Introduce APIs to allocate and free the MHI controller
-
[345/379,SRU,OEM-5.6] bus: mhi: core: Add const qualifier to MHI config information
-
[346/379,SRU,OEM-5.6] bus: mhi: Fix entries based on Kconfig coding style
-
[347/379,SRU,OEM-5.6] bus: mhi: core: Introduce debugfs entries for MHI
-
[348/379,SRU,OEM-5.6] bus: mhi: core: Introduce sysfs entries for MHI
-
[349/379,SRU,OEM-5.6] bus: mhi: core: Allow shared IRQ for event rings
-
[350/379,SRU,OEM-5.6] bus: mhi: Remove unused nr_irqs_req variable
-
[351/379,SRU,OEM-5.6] bus: mhi: core: Fix the building of MHI module
-
[352/379,SRU,OEM-5.6] bus: mhi: debugfs: Print channel context read-pointer
-
[353/379,SRU,OEM-5.6] net: qrtr: ns: Fix the incorrect usage of rcu_read_lock()
-
[354/379,SRU,OEM-5.6] ath11k: Fix memory leak on error path
-
[355/379,SRU,OEM-5.6] ath11k: add 64bit check before reading msi high addr
-
[356/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: pci: support platforms with one MSI vector
-
[357/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: try to allocate big block of dma memory firstly
-
[358/379,SRU,OEM-5.6] ath11k: dp_rx: fix monitor status dma unmap direction
-
[359/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: hook mhi suspend and resume
-
[360/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: implement hif suspend and resume functions.
-
[361/379,SRU,OEM-5.6] ath11k: pci: read select_window register to ensure write is finished
-
[362/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: implement htc suspend related callbacks
-
[363/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: put target to suspend when system enters suspend state
-
[364/379,SRU,OEM-5.6] ath11k: mhi: print a warning if firmware crashed
-
[365/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: qmi: print allocated memory segment addresses and sizes
-
[366/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID
-
[367/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: fix pcie link unstable issue
-
[368/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: fix PCI L1ss clock unstable problem
-
[369/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: disable OTP write privilege
-
[370/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: disable ASPM L0sLs before downloading firmware
-
[371/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: purge rx pktlog when entering suspend
-
[372/379,SRU,OEM-5.6] ath11k: set credit_update flag for flow controlled ep only
-
[373/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: implement wow enable and wow wakeup command
-
[374/379,SRU,OEM-5.6] ath11k: hif: add ce irq enable and disable functions
-
[375/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: put target to wow state when suspend happens
-
[376/379,SRU,OEM-5.6] ath11k: Fix incorrect tlvs in scan start command
-
[377/379,SRU,OEM-5.6] UBUNTU: SAUCE: ath11k: vdev delete synchronization with firmware
-
[378/379,SRU,OEM-5.6] ath11k: peer delete synchronization with firmware
-
[379/379,SRU,OEM-5.6] UBUNTU: [Config] enable ath11k WiFi driver
|