@@ -288,6 +288,45 @@ static int sof_machine_check(struct snd_sof_dev *sdev)
#endif
}
+/* FW Boot State Transition Diagram
+ *
+ * +-----------------------------------------------------------------------+
+ * | |
+ * ------------------ ------------------ |
+ * | | | | |
+ * | BOOT_FAILED | | READY_FAILED |-------------------------+ |
+ * | | | | | |
+ * ------------------ ------------------ | |
+ * ^ ^ | |
+ * | | | |
+ * (FW Boot Timeout) (FW_READY FAIL) | |
+ * | | | |
+ * | | | |
+ * ------------------ | ------------------ | |
+ * | | | | | | |
+ * | IN_PROGRESS |---------------+------------->| COMPLETE | | |
+ * | | (FW Boot OK) (FW_READY OK) | | | |
+ * ------------------ ------------------ | |
+ * ^ | | |
+ * | | | |
+ * (FW Loading OK) (System Suspend/Runtime Suspend)
+ * | | | |
+ * | | | |
+ * ------------------ ------------------ | | |
+ * | | | |<-----+ | |
+ * | PREPARE | | NOT_STARTED |<---------------------+ |
+ * | | | |<---------------------------+
+ * ------------------ ------------------
+ * | ^ | ^
+ * | | | |
+ * | +-----------------------+ |
+ * | (DSP Probe OK) |
+ * | |
+ * | |
+ * +------------------------------------+
+ * (System Suspend/Runtime Suspend)
+ */
+
static int sof_probe_continue(struct snd_sof_dev *sdev)
{
struct snd_sof_pdata *plat_data = sdev->pdata;
@@ -303,6 +342,8 @@ static int sof_probe_continue(struct snd_sof_dev *sdev)
return ret;
}
+ sdev->fw_state = SOF_FW_BOOT_PREPARE;
+
/* check machine info */
ret = sof_machine_check(sdev);
if (ret < 0) {
@@ -342,7 +383,12 @@ static int sof_probe_continue(struct snd_sof_dev *sdev)
goto fw_load_err;
}
- /* boot the firmware */
+ sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS;
+
+ /*
+ * Boot the firmware. The FW boot status will be modified
+ * in snd_sof_run_firmware() depending on the outcome.
+ */
ret = snd_sof_run_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to boot DSP firmware %d\n",
@@ -447,6 +493,7 @@ int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data)
sdev->pdata = plat_data;
sdev->first_boot = true;
+ sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
dev_set_drvdata(dev, sdev);
/* check all mandatory ops */
@@ -278,7 +278,6 @@ int hda_dsp_cl_boot_firmware(struct snd_sof_dev *sdev)
/* init for booting wait */
init_waitqueue_head(&sdev->boot_wait);
- sdev->boot_complete = false;
/* prepare DMA for code loader stream */
tag = cl_stream_prepare(sdev, 0x40, stripped_firmware.size,
@@ -171,7 +171,7 @@ void hda_dsp_dump_skl(struct snd_sof_dev *sdev, u32 flags)
panic = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
HDA_ADSP_ERROR_CODE_SKL + 0x4);
- if (sdev->boot_complete) {
+ if (sdev->fw_state == SOF_FW_BOOT_COMPLETE) {
hda_dsp_get_registers(sdev, &xoops, &panic_info, stack,
HDA_DSP_STACK_DUMP_SIZE);
snd_sof_get_status(sdev, status, panic, &xoops, &panic_info,
@@ -198,7 +198,7 @@ void hda_dsp_dump(struct snd_sof_dev *sdev, u32 flags)
HDA_DSP_SRAM_REG_FW_STATUS);
panic = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_SRAM_REG_FW_TRACEP);
- if (sdev->boot_complete) {
+ if (sdev->fw_state == SOF_FW_BOOT_COMPLETE) {
hda_dsp_get_registers(sdev, &xoops, &panic_info, stack,
HDA_DSP_STACK_DUMP_SIZE);
snd_sof_get_status(sdev, status, panic, &xoops, &panic_info,
@@ -348,19 +348,12 @@ void snd_sof_ipc_msgs_rx(struct snd_sof_dev *sdev)
break;
case SOF_IPC_FW_READY:
/* check for FW boot completion */
- if (!sdev->boot_complete) {
+ if (sdev->fw_state == SOF_FW_BOOT_IN_PROGRESS) {
err = sof_ops(sdev)->fw_ready(sdev, cmd);
- if (err < 0) {
- /*
- * this indicates a mismatch in ABI
- * between the driver and fw
- */
- dev_err(sdev->dev, "error: ABI mismatch %d\n",
- err);
- } else {
- /* firmware boot completed OK */
- sdev->boot_complete = true;
- }
+ if (err < 0)
+ sdev->fw_state = SOF_FW_BOOT_READY_FAILED;
+ else
+ sdev->fw_state = SOF_FW_BOOT_COMPLETE;
/* wake up firmware loader */
wake_up(&sdev->boot_wait);
@@ -511,7 +511,6 @@ int snd_sof_run_firmware(struct snd_sof_dev *sdev)
int init_core_mask;
init_waitqueue_head(&sdev->boot_wait);
- sdev->boot_complete = false;
/* create read-only fw_version debugfs to store boot version info */
if (sdev->first_boot) {
@@ -543,19 +542,27 @@ int snd_sof_run_firmware(struct snd_sof_dev *sdev)
init_core_mask = ret;
- /* now wait for the DSP to boot */
- ret = wait_event_timeout(sdev->boot_wait, sdev->boot_complete,
+ /*
+ * now wait for the DSP to boot. There are 3 possible outcomes:
+ * 1. Boot wait times out indicating FW boot failure.
+ * 2. FW boots successfully and fw_ready op succeeds.
+ * 3. FW boots but fw_ready op fails.
+ */
+ ret = wait_event_timeout(sdev->boot_wait,
+ sdev->fw_state > SOF_FW_BOOT_IN_PROGRESS,
msecs_to_jiffies(sdev->boot_timeout));
if (ret == 0) {
dev_err(sdev->dev, "error: firmware boot failure\n");
snd_sof_dsp_dbg_dump(sdev, SOF_DBG_REGS | SOF_DBG_MBOX |
SOF_DBG_TEXT | SOF_DBG_PCI);
- /* after this point FW_READY msg should be ignored */
- sdev->boot_complete = true;
+ sdev->fw_state = SOF_FW_BOOT_FAILED;
return -EIO;
}
- dev_info(sdev->dev, "firmware boot complete\n");
+ if (sdev->fw_state == SOF_FW_BOOT_COMPLETE)
+ dev_info(sdev->dev, "firmware boot complete\n");
+ else
+ return -EIO; /* FW boots but fw_ready op failed */
/* perform post fw run operations */
ret = snd_sof_dsp_post_fw_run(sdev);
@@ -283,6 +283,8 @@ static int sof_resume(struct device *dev, bool runtime_resume)
return ret;
}
+ sdev->fw_state = SOF_FW_BOOT_PREPARE;
+
/* load the firmware */
ret = snd_sof_load_firmware(sdev);
if (ret < 0) {
@@ -292,7 +294,12 @@ static int sof_resume(struct device *dev, bool runtime_resume)
return ret;
}
- /* boot the firmware */
+ sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS;
+
+ /*
+ * Boot the firmware. The FW boot status will be modified
+ * in snd_sof_run_firmware() depending on the outcome.
+ */
ret = snd_sof_run_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev,
@@ -338,6 +345,9 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
if (!sof_ops(sdev)->suspend)
return 0;
+ if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
+ goto power_down;
+
/* release trace */
snd_sof_release_trace(sdev);
@@ -375,6 +385,12 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
ret);
}
+power_down:
+
+ /* return if the DSP was not probed successfully */
+ if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
+ return 0;
+
/* power down all DSP cores */
if (runtime_suspend)
ret = snd_sof_dsp_runtime_suspend(sdev);
@@ -385,6 +401,9 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
"error: failed to power down DSP during suspend %d\n",
ret);
+ /* reset FW state */
+ sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
+
return ret;
}
@@ -356,6 +356,15 @@ struct snd_sof_dai {
struct list_head list; /* list in sdev dai list */
};
+enum snd_sof_fw_state {
+ SOF_FW_BOOT_NOT_STARTED = 0,
+ SOF_FW_BOOT_PREPARE,
+ SOF_FW_BOOT_IN_PROGRESS,
+ SOF_FW_BOOT_FAILED,
+ SOF_FW_BOOT_READY_FAILED, /* firmware booted but fw_ready op failed */
+ SOF_FW_BOOT_COMPLETE,
+};
+
/*
* SOF Device Level.
*/
@@ -372,7 +381,7 @@ struct snd_sof_dev {
/* DSP firmware boot */
wait_queue_head_t boot_wait;
- u32 boot_complete;
+ enum snd_sof_fw_state fw_state;
u32 first_boot;
/* work queue in case the probe is implemented in two steps */