From patchwork Fri Oct 11 15:28:21 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Aaron Ma X-Patchwork-Id: 1175280 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=lists.ubuntu.com (client-ip=91.189.94.19; helo=huckleberry.canonical.com; envelope-from=kernel-team-bounces@lists.ubuntu.com; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=canonical.com Received: from huckleberry.canonical.com (huckleberry.canonical.com [91.189.94.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 46qX0m5fZTz9sPw; Sat, 12 Oct 2019 02:28:39 +1100 (AEDT) Received: from localhost ([127.0.0.1] helo=huckleberry.canonical.com) by huckleberry.canonical.com with esmtp (Exim 4.86_2) (envelope-from ) id 1iIwqG-0002qJ-SM; Fri, 11 Oct 2019 15:28:32 +0000 Received: from youngberry.canonical.com ([91.189.89.112]) by huckleberry.canonical.com with esmtps (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.86_2) (envelope-from ) id 1iIwqE-0002pq-9K for kernel-team@lists.ubuntu.com; Fri, 11 Oct 2019 15:28:30 +0000 Received: from [114.245.47.25] (helo=localhost.localdomain) by youngberry.canonical.com with esmtpsa (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.86_2) (envelope-from ) id 1iIwqD-0004iz-Hn for kernel-team@lists.ubuntu.com; Fri, 11 Oct 2019 15:28:30 +0000 From: Aaron Ma To: kernel-team@lists.ubuntu.com Subject: [PATCH 1/2] UBUNTU: SAUCE: i915: intel_dp_aux_backlight: Fix max backlight calculations Date: Fri, 11 Oct 2019 23:28:21 +0800 Message-Id: <20191011152822.26495-2-aaron.ma@canonical.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20191011152822.26495-1-aaron.ma@canonical.com> References: <20191011152822.26495-1-aaron.ma@canonical.com> MIME-Version: 1.0 X-BeenThere: kernel-team@lists.ubuntu.com X-Mailman-Version: 2.1.20 Precedence: list List-Id: Kernel team discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: kernel-team-bounces@lists.ubuntu.com Sender: "kernel-team" From: Furquan Shaikh BugLink: https://bugs.launchpad.net/bugs/1844798 Max backlight value for the panel was being calculated using byte count i.e. 0xffff if 2 bytes are supported for backlight brightness and 0xff if 1 byte is supported. However, EDP_PWMGEN_BIT_COUNT determines the number of active control bits used for the brightness setting. Thus, even if the panel uses 2 byte setting, it might not use all the control bits. Thus, max backlight should be set based on the value of EDP_PWMGEN_BIT_COUNT instead of assuming 65535 or 255. Additionally, EDP_PWMGEN_BIT_COUNT was being updated based on the VBT frequency which results in a different max backlight value. Thus, setting of EDP_PWMGEN_BIT_COUNT is moved to setup phase instead of enable so that max backlight can be calculated correctly. Only the frequency divider is set during the enable phase using the value of EDP_PWMGEN_BIT_COUNT. v2: In case of DPCD failure and pn being uninitialized, return max_backlight as 0. Signed-off-by: Furquan Shaikh Reviewed-by: Stéphane Marchesin Link: https://patchwork.kernel.org/patch/11039395 Signed-off-by: Aaron Ma --- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 135 ++++++++++++------ 1 file changed, 90 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c index 2bb2ceb9d463..cbf61ac2910d 100644 --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c @@ -110,61 +110,34 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector) { struct drm_i915_private *dev_priv = to_i915(connector->base.dev); struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); - int freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1; - u8 pn, pn_min, pn_max; + int freq, fxp, f, fxp_actual, fxp_min, fxp_max; + u8 pn; - /* Find desired value of (F x P) - * Note that, if F x P is out of supported range, the maximum value or - * minimum value will applied automatically. So no need to check that. - */ freq = dev_priv->vbt.backlight.pwm_freq_hz; - DRM_DEBUG_KMS("VBT defined backlight frequency %u Hz\n", freq); if (!freq) { DRM_DEBUG_KMS("Use panel default backlight frequency\n"); return false; } - fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ), freq); - - /* Use highest possible value of Pn for more granularity of brightness - * adjustment while satifying the conditions below. - * - Pn is in the range of Pn_min and Pn_max - * - F is in the range of 1 and 255 - * - FxP is within 25% of desired value. - * Note: 25% is arbitrary value and may need some tweak. - */ - if (drm_dp_dpcd_readb(&intel_dp->aux, - DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) { - DRM_DEBUG_KMS("Failed to read pwmgen bit count cap min\n"); + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, + &pn) < 0) { + DRM_DEBUG_KMS("Failed to read aux pwmgen bit count\n"); return false; } - if (drm_dp_dpcd_readb(&intel_dp->aux, - DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) { - DRM_DEBUG_KMS("Failed to read pwmgen bit count cap max\n"); - return false; - } - pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK; - pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK; + fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ), freq); + f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255); + fxp_actual = f << pn; + + /* Ensure frequency is within 25% of desired value */ fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4); fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4); - if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) { - DRM_DEBUG_KMS("VBT defined backlight frequency out of range\n"); - return false; - } - - for (pn = pn_max; pn >= pn_min; pn--) { - f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255); - fxp_actual = f << pn; - if (fxp_min <= fxp_actual && fxp_actual <= fxp_max) - break; - } - if (drm_dp_dpcd_writeb(&intel_dp->aux, - DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) { - DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n"); + if (fxp_min > fxp_actual || fxp_actual > fxp_max) { + DRM_DEBUG_KMS("Actual frequency out of range\n"); return false; } + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_BACKLIGHT_FREQ_SET, (u8) f) < 0) { DRM_DEBUG_KMS("Failed to write aux backlight freq\n"); @@ -224,16 +197,88 @@ static void intel_dp_aux_disable_backlight(const struct drm_connector_state *old set_aux_backlight_enable(enc_to_intel_dp(old_conn_state->best_encoder), false); } +static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); + u32 max_backlight = 0; + int freq, fxp, fxp_min, fxp_max, fxp_actual, f = 1; + u8 pn, pn_min, pn_max; + + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_PWMGEN_BIT_COUNT, + &pn) != 1) + return max_backlight; + + pn &= DP_EDP_PWMGEN_BIT_COUNT_MASK; + max_backlight = (1 << pn) - 1; + + /* Find desired value of (F x P) + * Note that, if F x P is out of supported range, the maximum value or + * minimum value will applied automatically. So no need to check that. + */ + freq = dev_priv->vbt.backlight.pwm_freq_hz; + DRM_DEBUG_KMS("VBT defined backlight frequency %u Hz\n", freq); + if (!freq) { + DRM_DEBUG_KMS("Use panel default backlight frequency\n"); + return max_backlight; + } + + fxp = DIV_ROUND_CLOSEST(KHz(DP_EDP_BACKLIGHT_FREQ_BASE_KHZ), freq); + + /* Use highest possible value of Pn for more granularity of brightness + * adjustment while satifying the conditions below. + * - Pn is in the range of Pn_min and Pn_max + * - F is in the range of 1 and 255 + * - FxP is within 25% of desired value. + * Note: 25% is arbitrary value and may need some tweak. + */ + if (drm_dp_dpcd_readb(&intel_dp->aux, + DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) { + DRM_DEBUG_KMS("Failed to read pwmgen bit count cap min\n"); + return max_backlight; + } + if (drm_dp_dpcd_readb(&intel_dp->aux, + DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) { + DRM_DEBUG_KMS("Failed to read pwmgen bit count cap max\n"); + return max_backlight; + } + pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK; + pn_max &= DP_EDP_PWMGEN_BIT_COUNT_MASK; + + fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4); + fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4); + if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) { + DRM_DEBUG_KMS("VBT defined backlight frequency out of range\n"); + return max_backlight; + } + + for (pn = pn_max; pn >= pn_min; pn--) { + f = clamp(DIV_ROUND_CLOSEST(fxp, 1 << pn), 1, 255); + fxp_actual = f << pn; + if (fxp_min <= fxp_actual && fxp_actual <= fxp_max) + break; + } + + if (drm_dp_dpcd_writeb(&intel_dp->aux, + DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) { + DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n"); + return max_backlight; + } + + max_backlight = (1 << pn) - 1; + + return max_backlight; +} + static int intel_dp_aux_setup_backlight(struct intel_connector *connector, enum pipe pipe) { - struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); struct intel_panel *panel = &connector->panel; - if (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_BYTE_COUNT) - panel->backlight.max = 0xFFFF; - else - panel->backlight.max = 0xFF; + panel->backlight.max = intel_dp_aux_calc_max_backlight(connector); + + if (!panel->backlight.max) + return -ENODEV; panel->backlight.min = 0; panel->backlight.level = intel_dp_aux_get_backlight(connector);