@@ -343,6 +343,31 @@ int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
}
EXPORT_SYMBOL_GPL(btintel_set_event_mask_mfg);
+int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
+{
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*ver)) {
+ bt_dev_err(hdev, "Intel version event size mismatch");
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ memcpy(ver, skb->data, sizeof(*ver));
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_version);
+
/* ------- REGMAP IBT SUPPORT ------- */
#define IBT_REG_MODE_8BIT 0x00
@@ -83,6 +83,7 @@ int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name);
int btintel_set_event_mask(struct hci_dev *hdev, bool debug);
int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug);
+int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver);
struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
u16 opcode_write);
@@ -140,6 +141,12 @@ static inline int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
return -EOPNOTSUPP;
}
+static inline int btintel_read_version(struct hci_dev *hdev,
+ struct intel_version *ver)
+{
+ return -EOPNOTSUPP;
+}
+
static inline struct regmap *btintel_regmap_init(struct hci_dev *hdev,
u16 opcode_read,
u16 opcode_write)
@@ -1659,8 +1659,8 @@ static int btusb_setup_intel(struct hci_dev *hdev)
struct sk_buff *skb;
const struct firmware *fw;
const u8 *fw_ptr;
- int disable_patch;
- struct intel_version *ver;
+ int disable_patch, err;
+ struct intel_version ver;
const u8 mfg_enable[] = { 0x01, 0x00 };
const u8 mfg_disable[] = { 0x00, 0x00 };
@@ -1691,35 +1691,22 @@ static int btusb_setup_intel(struct hci_dev *hdev)
* The returned information are hardware variant and revision plus
* firmware variant, revision and build number.
*/
- skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- BT_ERR("%s reading Intel fw version command failed (%ld)",
- hdev->name, PTR_ERR(skb));
- return PTR_ERR(skb);
- }
-
- if (skb->len != sizeof(*ver)) {
- BT_ERR("%s Intel version event length mismatch", hdev->name);
- kfree_skb(skb);
- return -EIO;
- }
-
- ver = (struct intel_version *)skb->data;
+ err = btintel_read_version(hdev, &ver);
+ if (err)
+ return err;
BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
- hdev->name, ver->hw_platform, ver->hw_variant,
- ver->hw_revision, ver->fw_variant, ver->fw_revision,
- ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy,
- ver->fw_patch_num);
+ hdev->name, ver.hw_platform, ver.hw_variant, ver.hw_revision,
+ ver.fw_variant, ver.fw_revision, ver.fw_build_num,
+ ver.fw_build_ww, ver.fw_build_yy, ver.fw_patch_num);
/* fw_patch_num indicates the version of patch the device currently
* have. If there is no patch data in the device, it is always 0x00.
* So, if it is other than 0x00, no need to patch the device again.
*/
- if (ver->fw_patch_num) {
+ if (ver.fw_patch_num) {
BT_INFO("%s: Intel device is already patched. patch num: %02x",
- hdev->name, ver->fw_patch_num);
- kfree_skb(skb);
+ hdev->name, ver.fw_patch_num);
goto complete;
}
@@ -1729,15 +1716,11 @@ static int btusb_setup_intel(struct hci_dev *hdev)
* If no patch file is found, allow the device to operate without
* a patch.
*/
- fw = btusb_setup_intel_get_fw(hdev, ver);
- if (!fw) {
- kfree_skb(skb);
+ fw = btusb_setup_intel_get_fw(hdev, &ver);
+ if (!fw)
goto complete;
- }
fw_ptr = fw->data;
- kfree_skb(skb);
-
/* This Intel specific command enables the manufacturer mode of the
* controller.
*
@@ -2022,7 +2005,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
0x00, 0x08, 0x04, 0x00 };
struct btusb_data *data = hci_get_drvdata(hdev);
struct sk_buff *skb;
- struct intel_version *ver;
+ struct intel_version ver;
struct intel_boot_params *params;
const struct firmware *fw;
const u8 *fw_ptr;
@@ -2040,28 +2023,16 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* is in bootloader mode or if it already has operational firmware
* loaded.
*/
- skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- BT_ERR("%s: Reading Intel version information failed (%ld)",
- hdev->name, PTR_ERR(skb));
- return PTR_ERR(skb);
- }
-
- if (skb->len != sizeof(*ver)) {
- BT_ERR("%s: Intel version event size mismatch", hdev->name);
- kfree_skb(skb);
- return -EILSEQ;
- }
-
- ver = (struct intel_version *)skb->data;
+ err = btintel_read_version(hdev, &ver);
+ if (err)
+ return err;
/* The hardware platform number has a fixed value of 0x37 and
* for now only accept this single value.
*/
- if (ver->hw_platform != 0x37) {
+ if (ver.hw_platform != 0x37) {
BT_ERR("%s: Unsupported Intel hardware platform (%u)",
- hdev->name, ver->hw_platform);
- kfree_skb(skb);
+ hdev->name, ver.hw_platform);
return -EINVAL;
}
@@ -2071,14 +2042,13 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* This check has been put in place to ensure correct forward
* compatibility options when newer hardware variants come along.
*/
- if (ver->hw_variant != 0x0b && ver->hw_variant != 0x0c) {
+ if (ver.hw_variant != 0x0b && ver.hw_variant != 0x0c) {
BT_ERR("%s: Unsupported Intel hardware variant (%u)",
- hdev->name, ver->hw_variant);
- kfree_skb(skb);
+ hdev->name, ver.hw_variant);
return -EINVAL;
}
- btintel_version_info(hdev, ver);
+ btintel_version_info(hdev, &ver);
/* The firmware variant determines if the device is in bootloader
* mode or is running operational firmware. The value 0x06 identifies
@@ -2093,8 +2063,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
* It is not possible to use the Secure Boot Parameters in this
* case since that command is only available in bootloader mode.
*/
- if (ver->fw_variant == 0x23) {
- kfree_skb(skb);
+ if (ver.fw_variant == 0x23) {
clear_bit(BTUSB_BOOTLOADER, &data->flags);
btintel_check_bdaddr(hdev);
return 0;
@@ -2103,15 +2072,12 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
/* If the device is not in bootloader mode, then the only possible
* choice is to return an error and abort the device initialization.
*/
- if (ver->fw_variant != 0x06) {
+ if (ver.fw_variant != 0x06) {
BT_ERR("%s: Unsupported Intel firmware variant (%u)",
- hdev->name, ver->fw_variant);
- kfree_skb(skb);
+ hdev->name, ver.fw_variant);
return -ENODEV;
}
- kfree_skb(skb);
-
/* Read the secure boot parameters to identify the operating
* details of the bootloader.
*/
@@ -548,7 +548,7 @@ static int intel_setup(struct hci_uart *hu)
struct intel_device *idev = NULL;
struct hci_dev *hdev = hu->hdev;
struct sk_buff *skb;
- struct intel_version *ver;
+ struct intel_version ver;
struct intel_boot_params *params;
struct list_head *p;
const struct firmware *fw;
@@ -596,35 +596,16 @@ static int intel_setup(struct hci_uart *hu)
* is in bootloader mode or if it already has operational firmware
* loaded.
*/
- skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
- PTR_ERR(skb));
- return PTR_ERR(skb);
- }
-
- if (skb->len != sizeof(*ver)) {
- bt_dev_err(hdev, "Intel version event size mismatch");
- kfree_skb(skb);
- return -EILSEQ;
- }
-
- ver = (struct intel_version *)skb->data;
- if (ver->status) {
- bt_dev_err(hdev, "Intel version command failure (%02x)",
- ver->status);
- err = -bt_to_errno(ver->status);
- kfree_skb(skb);
+ err = btintel_read_version(hdev, &ver);
+ if (err)
return err;
- }
/* The hardware platform number has a fixed value of 0x37 and
* for now only accept this single value.
*/
- if (ver->hw_platform != 0x37) {
+ if (ver.hw_platform != 0x37) {
bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
- ver->hw_platform);
- kfree_skb(skb);
+ ver.hw_platform);
return -EINVAL;
}
@@ -633,14 +614,13 @@ static int intel_setup(struct hci_uart *hu)
* put in place to ensure correct forward compatibility options
* when newer hardware variants come along.
*/
- if (ver->hw_variant != 0x0b) {
+ if (ver.hw_variant != 0x0b) {
bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
- ver->hw_variant);
- kfree_skb(skb);
+ ver.hw_variant);
return -EINVAL;
}
- btintel_version_info(hdev, ver);
+ btintel_version_info(hdev, &ver);
/* The firmware variant determines if the device is in bootloader
* mode or is running operational firmware. The value 0x06 identifies
@@ -655,8 +635,7 @@ static int intel_setup(struct hci_uart *hu)
* It is not possible to use the Secure Boot Parameters in this
* case since that command is only available in bootloader mode.
*/
- if (ver->fw_variant == 0x23) {
- kfree_skb(skb);
+ if (ver.fw_variant == 0x23) {
clear_bit(STATE_BOOTLOADER, &intel->flags);
btintel_check_bdaddr(hdev);
return 0;
@@ -665,15 +644,12 @@ static int intel_setup(struct hci_uart *hu)
/* If the device is not in bootloader mode, then the only possible
* choice is to return an error and abort the device initialization.
*/
- if (ver->fw_variant != 0x06) {
+ if (ver.fw_variant != 0x06) {
bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
- ver->fw_variant);
- kfree_skb(skb);
+ ver.fw_variant);
return -ENODEV;
}
- kfree_skb(skb);
-
/* Read the secure boot parameters to identify the operating
* details of the bootloader.
*/