@@ -2017,6 +2017,12 @@ pci_wch_ch38x_setup(struct serial_private *priv,
#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
+#define PCI_VENDOR_ID_PERICOM 0x12D8
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7952 0x7952
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954
+#define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958
+
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
@@ -2331,27 +2337,12 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
* Pericom
*/
{
- .vendor = 0x12d8,
- .device = 0x7952,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
- },
- {
- .vendor = 0x12d8,
- .device = 0x7954,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
- },
- {
- .vendor = 0x12d8,
- .device = 0x7958,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
+ .vendor = PCI_VENDOR_ID_PERICOM,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
},
-
/*
* PLX
*/
@@ -3056,6 +3047,10 @@ enum pci_board_num_t {
pbn_fintek_8,
pbn_fintek_12,
pbn_wch384_4,
+ pbn_pericom_PI7C9X7951,
+ pbn_pericom_PI7C9X7952,
+ pbn_pericom_PI7C9X7954,
+ pbn_pericom_PI7C9X7958,
};
/*
@@ -3881,7 +3876,6 @@ static struct pciserial_board pci_boards[] = {
.base_baud = 115200,
.first_offset = 0x40,
},
-
[pbn_wch384_4] = {
.flags = FL_BASE0,
.num_ports = 4,
@@ -3889,6 +3883,33 @@ static struct pciserial_board pci_boards[] = {
.uart_offset = 8,
.first_offset = 0xC0,
},
+ /*
+ * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+ */
+ [pbn_pericom_PI7C9X7951] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 0x8,
+ },
+ [pbn_pericom_PI7C9X7952] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x8,
+ },
+ [pbn_pericom_PI7C9X7954] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x8,
+ },
+ [pbn_pericom_PI7C9X7958] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 0x8,
+ },
};
static const struct pci_device_id blacklist[] = {
@@ -5154,6 +5175,25 @@ static struct pci_device_id serial_pci_tbl[] = {
0,
0, pbn_exar_XR17V8358 },
/*
+ * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART
+ */
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_pericom_PI7C9X7951 },
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_pericom_PI7C9X7952 },
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_pericom_PI7C9X7954 },
+ { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_pericom_PI7C9X7958 },
+ /*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/
{ PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,