diff mbox

[3.13.y-ckt,128/139] ARC: [nsimosci] move peripherals to match model to FPGA

Message ID 1422483682-15393-129-git-send-email-kamal@canonical.com
State New
Headers show

Commit Message

Kamal Mostafa Jan. 28, 2015, 10:21 p.m. UTC 
3.13.11-ckt15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vineet Gupta <vgupta@synopsys.com>

commit e8ef060b37c2d3cc5fd0c0edbe4e42ec1cb9768b upstream.

This allows the sdplite/Zebu images to run on OSCI simulation platform

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 arch/arc/boot/dts/nsimosci.dts | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
diff mbox

Patch

diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts
index 398064c..4c169d8 100644
--- a/arch/arc/boot/dts/nsimosci.dts
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -20,7 +20,7 @@ 
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
 	};
 
 	aliases {
@@ -46,9 +46,9 @@ 
 			#interrupt-cells = <1>;
 		};
 
-		uart0: serial@c0000000 {
+		uart0: serial@f0000000 {
 			compatible = "ns8250";
-			reg = <0xc0000000 0x2000>;
+			reg = <0xf0000000 0x2000>;
 			interrupts = <11>;
 			clock-frequency = <3686400>;
 			baud = <115200>;
@@ -57,21 +57,21 @@ 
 			no-loopback-test = <1>;
 		};
 
-		pgu0: pgu@c9000000 {
+		pgu0: pgu@f9000000 {
 			compatible = "snps,arcpgufb";
-			reg = <0xc9000000 0x400>;
+			reg = <0xf9000000 0x400>;
 		};
 
-		ps2: ps2@c9001000 {
+		ps2: ps2@f9001000 {
 			compatible = "snps,arc_ps2";
-			reg = <0xc9000400 0x14>;
+			reg = <0xf9000400 0x14>;
 			interrupts = <13>;
 			interrupt-names = "arc_ps2_irq";
 		};
 
-		eth0: ethernet@c0003000 {
+		eth0: ethernet@f0003000 {
 			compatible = "snps,oscilan";
-			reg = <0xc0003000 0x44>;
+			reg = <0xf0003000 0x44>;
 			interrupts = <7>, <8>;
 			interrupt-names = "rx", "tx";
 		};