@@ -24,6 +24,7 @@
static int (*get_power)(void);
static int (*put_power)(void);
+static int (*get_cdclk)(void);
int hda_display_power(bool enable)
{
@@ -38,6 +39,13 @@ int hda_display_power(bool enable)
return put_power();
}
+int haswell_get_cdclk(void)
+{
+ if (!get_cdclk)
+ return -EINVAL;
+ return get_cdclk();
+}
+
int hda_i915_init(void)
{
int err = 0;
@@ -55,6 +63,10 @@ int hda_i915_init(void)
return -ENODEV;
}
+ get_cdclk = symbol_request(i915_get_cdclk_freq);
+ if (!get_cdclk) /* may have abnormal BCLK and audio playback rate */
+ snd_printd("hda-i915: get_cdclk symbol get fail\n");
+
snd_printd("HDA driver get symbol successfully from i915 module\n");
return err;
@@ -70,6 +82,10 @@ int hda_i915_exit(void)
symbol_put(i915_release_power_well);
put_power = NULL;
}
+ if (get_cdclk) {
+ symbol_put(i915_get_cdclk_freq);
+ get_cdclk = NULL;
+ }
return 0;
}
@@ -18,10 +18,12 @@
#ifdef CONFIG_SND_HDA_I915
int hda_display_power(bool enable);
+int haswell_get_cdclk(void);
int hda_i915_init(void);
int hda_i915_exit(void);
#else
static inline int hda_display_power(bool enable) { return 0; }
+static inline int haswell_get_cdclk(void) { return -EINVAL; }
static inline int hda_i915_init(void)
{
return -ENODEV;
@@ -748,6 +748,54 @@ static inline void mark_runtime_wc(struct azx *chip, struct azx_dev *azx_dev,
}
#endif
+#ifdef CONFIG_SND_HDA_I915
+/* Intel HSW/BDW display HDA controller Extended Mode registers.
+ * EM4 (M value) and EM5 (N Value) are used to convert CDClk (Core Display
+ * Clock) to 24MHz BCLK: BCLK = CDCLK * M / N
+ * The values will be lost when the display power well is disabled.
+ */
+#define ICH6_REG_EM4 0x100c
+#define ICH6_REG_EM5 0x1010
+
+static void haswell_set_bclk(struct azx *chip)
+{
+ int cdclk_freq;
+ unsigned int bclk_m, bclk_n;
+
+ cdclk_freq = haswell_get_cdclk();
+ if (cdclk_freq < 0)
+ return;
+
+ switch (cdclk_freq) {
+ case 337500:
+ bclk_m = 16;
+ bclk_n = 225;
+ break;
+
+ case 450000:
+ default: /* default CDCLK 450MHz */
+ bclk_m = 4;
+ bclk_n = 75;
+ break;
+
+ case 540000:
+ bclk_m = 4;
+ bclk_n = 90;
+ break;
+
+ case 675000:
+ bclk_m = 8;
+ bclk_n = 225;
+ break;
+ }
+
+ azx_writew(chip, EM4, bclk_m);
+ azx_writew(chip, EM5, bclk_n);
+}
+#else
+static inline void haswell_set_bclk(struct azx *chip) {}
+#endif
+
static int azx_acquire_irq(struct azx *chip, int do_disconnect);
static int azx_send_cmd(struct hda_bus *bus, unsigned int val);
/*
@@ -2951,8 +2999,10 @@ static int azx_resume(struct device *dev)
if (chip->disabled || chip->init_failed)
return 0;
- if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
hda_display_power(true);
+ haswell_set_bclk(chip);
+ }
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
@@ -3015,8 +3065,10 @@ static int azx_runtime_resume(struct device *dev)
if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return 0;
- if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
hda_display_power(true);
+ haswell_set_bclk(chip);
+ }
/* Read STATESTS before controller reset */
status = azx_readw(chip, STATESTS);
@@ -3744,6 +3796,10 @@ static int azx_first_init(struct azx *chip)
/* initialize chip */
azx_init_pci(chip);
+
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
+ haswell_set_bclk(chip);
+
azx_init_chip(chip, (probe_only[dev] & 2) == 0);
/* codec detection */
This is a note to let you know that I have just added a patch titled ALSA: hda - restore BCLK M/N value as per CDCLK for HSW/BDW display HDA controller to the linux-3.13.y-queue branch of the 3.13.y-ckt extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.13.y-queue This patch is scheduled to be released in version 3.13.11-ckt12. If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.13.y-ckt tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Kamal ------ From 8b2cea0d0d49beee75961a1e8fc082c2ccc914c6 Mon Sep 17 00:00:00 2001 From: Mengdong Lin <mengdong.lin@intel.com> Date: Tue, 18 Nov 2014 15:06:01 +0100 Subject: ALSA: hda - restore BCLK M/N value as per CDCLK for HSW/BDW display HDA controller commit e4d9e513dedb5ac4e166c1053314fa935ddecc8c upstream. For HSW/BDW display HD-A controller, hda_set_bclk() is defined to set BCLK by programming the M/N values as per the core display clock (CDCLK) queried from i915 display driver. And the audio driver will also set BCLK in azx_first_init() since the display driver can turn off the shared power in boot phase if only eDP is connected and M/N values will be lost and must be reprogrammed. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> [ 3.13-stable: takashi's backport for 3.{12,13} ] Signed-off-by: Kamal Mostafa <kamal@canonical.com> --- sound/pci/hda/hda_i915.c | 16 +++++++++++++ sound/pci/hda/hda_i915.h | 2 ++ sound/pci/hda/hda_intel.c | 60 +++++++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 76 insertions(+), 2 deletions(-) -- 1.9.1