@@ -3393,6 +3393,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
shost->max_lun = 1;
shost->max_channel = 1;
shost->max_cmd_len = 16;
+ shost->no_write_same = 1;
/* Schedule policy is determined by ->qc_defer()
* callback and it needs to see every deferred qc.
@@ -1628,6 +1628,7 @@ static struct scsi_host_template scsi_driver_template = {
.cmd_per_lun = 1,
.can_queue = 1,
.sdev_attrs = sbp2_scsi_sysfs_attrs,
+ .no_write_same = 1,
};
MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");
@@ -2025,7 +2025,8 @@ static struct scsi_host_template driver_template = {
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = twa_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
@@ -1600,7 +1600,8 @@ static struct scsi_host_template driver_template = {
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = twl_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
@@ -2277,7 +2277,8 @@ static struct scsi_host_template driver_template = {
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = tw_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
@@ -1087,6 +1087,7 @@ static struct scsi_host_template aac_driver_template = {
#endif
.use_clustering = ENABLE_CLUSTERING,
.emulated = 1,
+ .no_write_same = 1,
};
static void __aac_shutdown(struct aac_dev * aac)
@@ -137,6 +137,7 @@ static struct scsi_host_template arcmsr_scsi_host_template = {
.cmd_per_lun = ARCMSR_MAX_CMD_PERLUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = arcmsr_host_attrs,
+ .no_write_same = 1,
};
static struct pci_device_id arcmsr_device_id_table[] = {
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)},
@@ -4691,6 +4691,7 @@ static struct scsi_host_template gdth_template = {
.cmd_per_lun = GDTH_MAXC_P_L,
.unchecked_isa_dma = 1,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
};
#ifdef CONFIG_ISA
@@ -388,6 +388,7 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)
shost->unchecked_isa_dma = sht->unchecked_isa_dma;
shost->use_clustering = sht->use_clustering;
shost->ordered_tag = sht->ordered_tag;
+ shost->no_write_same = sht->no_write_same;
if (sht->supported_mode == MODE_UNKNOWN)
/* means we didn't set it ... default to INITIATOR */
@@ -538,6 +538,7 @@ static struct scsi_host_template hpsa_driver_template = {
.sdev_attrs = hpsa_sdev_attrs,
.shost_attrs = hpsa_shost_attrs,
.max_sectors = 8192,
+ .no_write_same = 1,
};
@@ -5947,7 +5947,8 @@ static struct scsi_host_template driver_template = {
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = ipr_ioa_attrs,
.sdev_attrs = ipr_dev_attrs,
- .proc_name = IPR_NAME
+ .proc_name = IPR_NAME,
+ .no_write_same = 1,
};
/**
@@ -374,6 +374,7 @@ static struct scsi_host_template ips_driver_template = {
.sg_tablesize = IPS_MAX_SG,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
};
@@ -4521,6 +4521,7 @@ static struct scsi_host_template megaraid_template = {
.eh_device_reset_handler = megaraid_reset,
.eh_bus_reset_handler = megaraid_reset,
.eh_host_reset_handler = megaraid_reset,
+ .no_write_same = 1,
};
static int __devinit
@@ -367,6 +367,7 @@ static struct scsi_host_template megaraid_template_g = {
.eh_host_reset_handler = megaraid_reset_handler,
.change_queue_depth = megaraid_change_queue_depth,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
.sdev_attrs = megaraid_sdev_attrs,
.shost_attrs = megaraid_shost_attrs,
};
@@ -2084,6 +2084,7 @@ static struct scsi_host_template megasas_template = {
.bios_param = megasas_bios_param,
.use_clustering = ENABLE_CLUSTERING,
.change_queue_depth = megasas_change_queue_depth,
+ .no_write_same = 1,
};
/**
@@ -4328,6 +4328,7 @@ static struct scsi_host_template pmcraid_host_template = {
.this_id = -1,
.sg_tablesize = PMCRAID_MAX_IOADLS,
.max_sectors = PMCRAID_IOA_MAX_SECTORS,
+ .no_write_same = 1,
.cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = pmcraid_host_attrs,
@@ -1402,6 +1402,7 @@ static struct scsi_host_template scsi_driver = {
.use_clustering = DISABLE_CLUSTERING,
/* Make sure we dont get a sg segment crosses a page boundary */
.dma_boundary = PAGE_SIZE-1,
+ .no_write_same = 1,
};
enum {
@@ -473,6 +473,9 @@ struct scsi_host_template {
*/
unsigned ordered_tag:1;
+ /* True if the controller does not support WRITE SAME */
+ unsigned no_write_same:1;
+
/*
* Countdown for host blocking with no commands outstanding.
*/
@@ -672,6 +675,9 @@ struct Scsi_Host {
/* Don't resume host in EH */
unsigned eh_noresume:1;
+ /* The controller does not support WRITE SAME */
+ unsigned no_write_same:1;
+
/*
* Optional work queue to be utilized by the transport
*/
This is a note to let you know that I have just added a patch titled [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers to the linux-3.5.y-queue branch of the 3.5.y.z extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.5.y-queue If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.5.y.z tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Luis ------ From d0ec2eaf88f08b990e62fb93524f8af4d66f0c0f Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" <martin.petersen@oracle.com> Date: Wed, 23 Oct 2013 06:25:40 -0400 Subject: [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers commit 54b2b50c20a61b51199bedb6e5d2f8ec2568fb43 upstream. Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> [ luis: backported to 3.5: - adjusted context - dropped changes to drivers/scsi/sd.c ] Signed-off-by: Luis Henriques <luis.henriques@canonical.com> --- drivers/ata/libata-scsi.c | 1 + drivers/firewire/sbp2.c | 1 + drivers/scsi/3w-9xxx.c | 3 ++- drivers/scsi/3w-sas.c | 3 ++- drivers/scsi/3w-xxxx.c | 3 ++- drivers/scsi/aacraid/linit.c | 1 + drivers/scsi/arcmsr/arcmsr_hba.c | 1 + drivers/scsi/gdth.c | 1 + drivers/scsi/hosts.c | 1 + drivers/scsi/hpsa.c | 1 + drivers/scsi/ipr.c | 3 ++- drivers/scsi/ips.c | 1 + drivers/scsi/megaraid.c | 1 + drivers/scsi/megaraid/megaraid_mbox.c | 1 + drivers/scsi/megaraid/megaraid_sas_base.c | 1 + drivers/scsi/pmcraid.c | 1 + drivers/scsi/storvsc_drv.c | 1 + include/scsi/scsi_host.h | 6 ++++++ 18 files changed, 27 insertions(+), 4 deletions(-) -- 1.8.3.2