@@ -3952,6 +3952,32 @@ static int hub_set_address(struct usb_device *udev, int devnum)
return retval;
}
+/*
+ * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM
+ * when they're plugged into a USB 2.0 port, but they don't work when LPM is
+ * enabled.
+ *
+ * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the
+ * device says it supports the new USB 2.0 Link PM errata by setting the BESL
+ * support bit in the BOS descriptor.
+ */
+static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
+{
+ int connect_type;
+
+ if (!udev->usb2_hw_lpm_capable)
+ return;
+
+ connect_type = usb_get_hub_port_connect_type(udev->parent,
+ udev->portnum);
+
+ if ((udev->bos->ext_cap->bmAttributes & USB_BESL_SUPPORT) ||
+ connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+ udev->usb2_hw_lpm_allowed = 1;
+ usb_set_usb2_hardware_lpm(udev, 1);
+ }
+}
+
/* Reset device, (re)assign address, get device descriptor.
* Device connection must be stable, no more debouncing needed.
* Returns device in USB_STATE_ADDRESS, except on error.
@@ -4245,6 +4271,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
/* notify HCD that we have a device connected and addressed */
if (hcd->driver->update_device)
hcd->driver->update_device(hcd, udev);
+ hub_set_initial_usb2_lpm_policy(udev);
fail:
if (retval) {
hub_port_disable(hub, port1, 0);
This is a note to let you know that I have just added a patch titled xhci: Enable LPM support only for hardwired or BESL devices to the linux-3.11.y-queue branch of the 3.11.y.z extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.11.y-queue If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.11.y.z tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Luis ------ From 3708037bc4177863211dc7dacb2e3292d580e4f1 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman@linux.intel.com> Date: Mon, 30 Sep 2013 17:26:31 +0300 Subject: xhci: Enable LPM support only for hardwired or BESL devices commit 890dae88672175f1d39f6105444d9bdc71c89258 upstream. Some usb3 devices falsely claim they support usb2 hardware Link PM when connected to a usb2 port. We only trust hardwired devices or devices with the later BESL LPM support to be LPM enabled as default. [Note: Sarah re-worked the original patch to move the code into the USB core, and updated it to check whether the USB device supports BESL, instead of checking if the xHCI port it's connected to supports BESL encoding.] This patch should be backported to kernels as old as 3.11, that contain the commit a558ccdcc71c7770c5e80c926a31cfe8a3892a09 "usb: xhci: add USB2 Link power management BESL support". Without this fix, some USB 3.0 devices will not enumerate or work properly under USB 2.0 ports on Haswell-ULT systems. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com> --- drivers/usb/core/hub.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) -- 1.8.3.2