@@ -69,26 +69,26 @@ struct voltage_map_desc {
int step;
};
-/* Voltage maps in mV */
+/* Voltage maps in uV */
static const struct voltage_map_desc ldo_voltage_map_desc = {
- .min = 800, .max = 3950, .step = 50,
+ .min = 800000, .max = 3950000, .step = 50000,
}; /* LDO1 ~ 18, 21 all */
static const struct voltage_map_desc buck1245_voltage_map_desc = {
- .min = 650, .max = 2225, .step = 25,
+ .min = 650000, .max = 2225000, .step = 25000,
}; /* Buck1, 2, 4, 5 */
static const struct voltage_map_desc buck37_voltage_map_desc = {
- .min = 750, .max = 3900, .step = 50,
+ .min = 750000, .max = 3900000, .step = 50000,
}; /* Buck3, 7 */
-/* current map in mA */
+/* current map in uA */
static const struct voltage_map_desc charger_current_map_desc = {
- .min = 200, .max = 950, .step = 50,
+ .min = 200000, .max = 950000, .step = 50000,
};
static const struct voltage_map_desc topoff_current_map_desc = {
- .min = 50, .max = 200, .step = 10,
+ .min = 50000, .max = 200000, .step = 10000,
};
static const struct voltage_map_desc *reg_voltage_map[] = {
@@ -192,7 +192,7 @@ static int max8997_list_voltage(struct regulator_dev *rdev,
if (val > desc->max)
return -EINVAL;
- return val * 1000;
+ return val;
}
static int max8997_get_enable_register(struct regulator_dev *rdev,
@@ -483,7 +483,6 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
const struct voltage_map_desc *desc;
int rid = rdev_get_id(rdev);
int i, reg, shift, mask, ret;
@@ -507,7 +506,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
desc = reg_voltage_map[rid];
- i = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+ i = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
if (i < 0)
return i;
@@ -555,7 +554,7 @@ static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
case MAX8997_BUCK4:
case MAX8997_BUCK5:
return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
- max8997->ramp_delay);
+ max8997->ramp_delay * 1000);
}
return 0;
@@ -654,7 +653,6 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
const struct voltage_map_desc *desc;
int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
bool gpio_dvs_mode = false;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
return -EINVAL;
@@ -679,7 +677,7 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
selector);
desc = reg_voltage_map[rid];
- new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+ new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
if (new_val < 0)
return new_val;
@@ -977,8 +975,8 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
max8997->buck1_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck1_voltage[i] / 1000,
- pdata->buck1_voltage[i] / 1000 +
+ pdata->buck1_voltage[i],
+ pdata->buck1_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
@@ -986,8 +984,8 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
max8997->buck2_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck2_voltage[i] / 1000,
- pdata->buck2_voltage[i] / 1000 +
+ pdata->buck2_voltage[i],
+ pdata->buck2_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
@@ -995,8 +993,8 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
max8997->buck5_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck5_voltage[i] / 1000,
- pdata->buck5_voltage[i] / 1000 +
+ pdata->buck5_voltage[i],
+ pdata->buck5_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
This is a note to let you know that I have just added a patch titled regulator: max8997: Use uV in voltage_map_desc to the linux-3.5.y-queue branch of the 3.5.y.z extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.5.y-queue If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.5.y.z tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Herton ------ From 4521cfcb97a458936255326e808b7fac283d6001 Mon Sep 17 00:00:00 2001 From: Axel Lin <axel.lin@ingics.com> Date: Fri, 28 Dec 2012 17:09:03 +0800 Subject: [PATCH] regulator: max8997: Use uV in voltage_map_desc commit bc3b7756b5ff66828acf7bc24f148d28b8d61108 upstream. Current code does integer division (min_vol = min_uV / 1000) before pass min_vol to max8997_get_voltage_proper_val(). So it is possible min_vol is truncated to a smaller value. For example, if the request min_uV is 800900 for ldo. min_vol = 800900 / 1000 = 800 (mV) Then max8997_get_voltage_proper_val returns 800 mV for this case which is lower than the requested voltage. Use uV rather than mV in voltage_map_desc to prevent truncation by integer division. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> --- drivers/regulator/max8997.c | 36 +++++++++++++++++------------------- 1 file changed, 17 insertions(+), 19 deletions(-) -- 1.7.9.5