| Message ID | d488b7016e0d1b1324c64d8a8b2f033851aab6c6.1699271804.git.michal.simek@amd.com |
|---|---|
| State | Accepted |
| Commit | 7576ab2facae92f4062f88c4f643e2548e112437 |
| Delegated to: | Andes |
| Headers | show |
| Series | [v2] riscv: Add support for AMD/Xilinx MicroBlaze V | expand |
On Mon, Nov 06, 2023 at 12:56:47PM +0100, Michal Simek wrote: > MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP. > It is hardware compatible with classic MicroBlaze processor. > > The patch contains initial wiring and configuration for initial HW design > with memory, cpu, interrupt controller, timers and uartlite console > (interrupt controller is listed but U-Boot is not using it). > > Provided DT is just describing one configuration and should be taken only > as example. > > Signed-off-by: Michal Simek <michal.simek@amd.com> > --- > > Changes in v2: > - Extend commit message > - DT changes, add interrupt controller, check agains dt schema > - The patch for amd,mbv32 compatible string is here > https://lore.kernel.org/r/d442d916204d26f82c1c3a924a4cdfb117960e1b.1699270661.git.michal.simek@amd.com > - The patch for board compatibility is here > https://lore.kernel.org/r/50c277c92c41a582ef171fb75efc6a6a4f860be2.1699271616.git.michal.simek@amd.com > > xlnx,xps-intc-1.00.a driver exists in the Linux kernel but DT binding is > missing. That's something what we need to work on. > arch/arm64/boot/dts/xilinx/xilinx-mbv32.dtb: /axi/interrupt-controller@41200000: failed to match any schema with compatible: ['xlnx,xps-intc-1.00.a'] > > Public annoucement is available here if someone is interested. > https://www.xilinx.com/products/design-tools/microblaze-v.html?utm_source=marketo&utm_medium=email&utm_campaign=EN-EM-2023-11-02-New-MicroBlaze-V-Processor&utm_term=btn&mkt_tok=NDA5LVdZWC03MjQAAAGPMMJYuPPscCags7WdvOeUSWy-_mC9aOwrobFaZRf5ok_eHoQUvTLBzJdHrkcBId9tQ4a-odfnU91WjUkIxx-iSG4OKGofjK5iZcAiK_VN8_xK > > --- > arch/riscv/Kconfig | 4 + > arch/riscv/dts/Makefile | 2 + > arch/riscv/dts/xilinx-mbv32.dts | 106 +++++++++++++++++++++++++++ > board/xilinx/Kconfig | 3 +- > board/xilinx/common/board.c | 5 ++ > board/xilinx/mbv/Kconfig | 28 +++++++ > board/xilinx/mbv/MAINTAINERS | 7 ++ > board/xilinx/mbv/Makefile | 5 ++ > board/xilinx/mbv/board.c | 11 +++ > configs/xilinx_mbv32_defconfig | 30 ++++++++ > configs/xilinx_mbv32_smode_defconfig | 32 ++++++++ > include/configs/xilinx_mbv.h | 6 ++ > 12 files changed, 238 insertions(+), 1 deletion(-) > create mode 100644 arch/riscv/dts/xilinx-mbv32.dts > create mode 100644 board/xilinx/mbv/Kconfig > create mode 100644 board/xilinx/mbv/MAINTAINERS > create mode 100644 board/xilinx/mbv/Makefile > create mode 100644 board/xilinx/mbv/board.c > create mode 100644 configs/xilinx_mbv32_defconfig > create mode 100644 configs/xilinx_mbv32_smode_defconfig > create mode 100644 include/configs/xilinx_mbv.h Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
On Mon, 2023-11-06 at 12:56 +0100, Michal Simek wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you > know the content is safe > > MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP. > It is hardware compatible with classic MicroBlaze processor. > > The patch contains initial wiring and configuration for initial HW > design > with memory, cpu, interrupt controller, timers and uartlite console > (interrupt controller is listed but U-Boot is not using it). > > Provided DT is just describing one configuration and should be taken > only > as example. > > Signed-off-by: Michal Simek <michal.simek@amd.com> > --- > > Changes in v2: > - Extend commit message > - DT changes, add interrupt controller, check agains dt schema > - The patch for amd,mbv32 compatible string is here > https://lore.kernel.org/r/d442d916204d26f82c1c3a924a4cdfb117960e1b.1699270661.git.michal.simek@amd.com > - The patch for board compatibility is here > https://lore.kernel.org/r/50c277c92c41a582ef171fb75efc6a6a4f860be2.1699271616.git.michal.simek@amd.com > > xlnx,xps-intc-1.00.a driver exists in the Linux kernel but DT binding > is > missing. That's something what we need to work on. > arch/arm64/boot/dts/xilinx/xilinx-mbv32.dtb: > /axi/interrupt-controller@41200000: failed to match any schema with > compatible: ['xlnx,xps-intc-1.00.a'] > > Public annoucement is available here if someone is interested. > https://www.xilinx.com/products/design-tools/microblaze-v.html?utm_source=marketo&utm_medium=email&utm_campaign=EN-EM-2023-11-02-New-MicroBlaze-V-Processor&utm_term=btn&mkt_tok=NDA5LVdZWC03MjQAAAGPMMJYuPPscCags7WdvOeUSWy-_mC9aOwrobFaZRf5ok_eHoQUvTLBzJdHrkcBId9tQ4a-odfnU91WjUkIxx-iSG4OKGofjK5iZcAiK_VN8_xK > > --- > arch/riscv/Kconfig | 4 + > arch/riscv/dts/Makefile | 2 + > arch/riscv/dts/xilinx-mbv32.dts | 106 > +++++++++++++++++++++++++++ > board/xilinx/Kconfig | 3 +- > board/xilinx/common/board.c | 5 ++ > board/xilinx/mbv/Kconfig | 28 +++++++ > board/xilinx/mbv/MAINTAINERS | 7 ++ > board/xilinx/mbv/Makefile | 5 ++ > board/xilinx/mbv/board.c | 11 +++ > configs/xilinx_mbv32_defconfig | 30 ++++++++ > configs/xilinx_mbv32_smode_defconfig | 32 ++++++++ > include/configs/xilinx_mbv.h | 6 ++ > 12 files changed, 238 insertions(+), 1 deletion(-) > create mode 100644 arch/riscv/dts/xilinx-mbv32.dts > create mode 100644 board/xilinx/mbv/Kconfig > create mode 100644 board/xilinx/mbv/MAINTAINERS > create mode 100644 board/xilinx/mbv/Makefile > create mode 100644 board/xilinx/mbv/board.c > create mode 100644 configs/xilinx_mbv32_defconfig > create mode 100644 configs/xilinx_mbv32_smode_defconfig > create mode 100644 include/configs/xilinx_mbv.h > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig > index 6d0d812ddb55..67126d96af89 100644 > --- a/arch/riscv/Kconfig > +++ b/arch/riscv/Kconfig > @@ -39,6 +39,9 @@ config TARGET_TH1520_LPI4A > bool "Support Sipeed's TH1520 Lichee PI 4A Board" > select SYS_CACHE_SHIFT_6 > > +config TARGET_XILINX_MBV > + bool "Support AMD/Xilinx MicroBlaze V" > + > endchoice > > config SYS_ICACHE_OFF > @@ -82,6 +85,7 @@ source "board/sifive/unmatched/Kconfig" > source "board/sipeed/maix/Kconfig" > source "board/starfive/visionfive2/Kconfig" > source "board/thead/th1520_lpi4a/Kconfig" > +source "board/xilinx/mbv/Kconfig" > > # platform-specific options below > source "arch/riscv/cpu/andesv5/Kconfig" > diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile > index be6c8a422729..b05bb5607f06 100644 > --- a/arch/riscv/dts/Makefile > +++ b/arch/riscv/dts/Makefile > @@ -9,6 +9,8 @@ dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive- > unmatched-a00.dtb > dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb > dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive- > visionfive-2.dtb > dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb > +dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb > + > include $(srctree)/scripts/Makefile.dts > > targets += $(dtb-y) > diff --git a/arch/riscv/dts/xilinx-mbv32.dts b/arch/riscv/dts/xilinx- > mbv32.dts > new file mode 100644 > index 000000000000..6a6b8b694bd1 > --- /dev/null > +++ b/arch/riscv/dts/xilinx-mbv32.dts > @@ -0,0 +1,106 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * dts file for AMD MicroBlaze V > + * > + * (C) Copyright 2023, Advanced Micro Devices, Inc. > + * > + * Michal Simek <michal.simek@amd.com> > + */ > + > +/dts-v1/; > +/ { > + #address-cells = <1>; > + #size-cells = <1>; > + model = "AMD MicroBlaze V 32bit"; > + compatible = "amd,mbv"; > + > + cpus: cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + timebase-frequency = <102000000>; > + cpu_0: cpu@0 { > + compatible = "amd,mbv32", "riscv"; > + device_type = "cpu"; > + reg = <0>; > + riscv,isa = "rv32imafdc"; > + i-cache-size = <32768>; > + d-cache-size = <32768>; > + clock-frequency = <102000000>; > + cpu0_intc: interrupt-controller { > + compatible = "riscv,cpu-intc"; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + }; > + }; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + bootargs = "earlycon"; > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@20000000 { > + device_type = "memory"; > + reg = <0x20000000 0x20000000>; > + }; > + > + clk102: clock { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <102000000>; > + }; > + > + axi: axi { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + ranges; > + bootph-all; > + > + axi_intc: interrupt-controller@41200000 { > + compatible = "xlnx,xps-intc-1.00.a"; > + reg = <0x41200000 0x1000>; > + interrupt-controller; > + interrupt-parent = <&cpu0_intc>; > + #interrupt-cells = <2>; > + kind-of-intr = <0>; > + }; > + > + xlnx_timer0: timer@41c00000 { > + compatible = "xlnx,xps-timer-1.00.a"; > + reg = <0x41c00000 0x1000>; > + interrupt-parent = <&axi_intc>; > + interrupts = <1 2>; > + bootph-all; > + xlnx,one-timer-only = <0>; > + clock-names = "s_axi_aclk"; > + clocks = <&clk102>; > + }; > + > + xlnx_timer1: timer@41c20000 { > + compatible = "xlnx,xps-timer-1.00.a"; > + reg = <0x41c20000 0x1000>; > + interrupt-parent = <&axi_intc>; > + interrupts = <0 2>; > + xlnx,one-timer-only = <0>; > + clock-names = "s_axi_aclk"; > + clocks = <&clk102>; > + }; > + > + uart0: serial@40600000 { > + compatible = "xlnx,xps-uartlite-1.00.a"; > + reg = <0x40600000 0x1000>; > + interrupt-parent = <&axi_intc>; > + interrupts = <2 2>; > + bootph-all; > + clocks = <&clk102>; > + current-speed = <115200>; > + xlnx,data-bits = <8>; > + xlnx,use-parity = <0>; > + }; > + }; > +}; > diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig > index 4f0776e8bd95..843198fa0da8 100644 > --- a/board/xilinx/Kconfig > +++ b/board/xilinx/Kconfig > @@ -51,10 +51,11 @@ config XILINX_OF_BOARD_DTB_ADDR > > config BOOT_SCRIPT_OFFSET > hex "Boot script offset" > - depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || > ARCH_VERSAL_NET || MICROBLAZE > + depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || > ARCH_VERSAL_NET || MICROBLAZE || TARGET_XILINX_MBV > default 0xFC0000 if ARCH_ZYNQ || MICROBLAZE > default 0x3E80000 if ARCH_ZYNQMP > default 0x7F80000 if ARCH_VERSAL || ARCH_VERSAL_NET > + default 0 if TARGET_XILINX_MBV > help > Specifies distro boot script offset in NAND/QSPI/NOR > flash. > > diff --git a/board/xilinx/common/board.c > b/board/xilinx/common/board.c > index 9309b071269f..12a877c71549 100644 > --- a/board/xilinx/common/board.c > +++ b/board/xilinx/common/board.c > @@ -652,6 +652,11 @@ int embedded_dtb_select(void) > #endif > > #if defined(CONFIG_LMB) > + > +#ifndef MMU_SECTION_SIZE > +#define MMU_SECTION_SIZE (1 * 1024 * 1024) > +#endif > + > phys_addr_t board_get_usable_ram_top(phys_size_t total_size) > { > phys_size_t size; > diff --git a/board/xilinx/mbv/Kconfig b/board/xilinx/mbv/Kconfig > new file mode 100644 > index 000000000000..4bc9f72c541b > --- /dev/null > +++ b/board/xilinx/mbv/Kconfig > @@ -0,0 +1,28 @@ > +if TARGET_XILINX_MBV > + > +config SYS_BOARD > + default "mbv" > + > +config SYS_VENDOR > + default "xilinx" > + > +config SYS_CPU > + default "generic" > + > +config SYS_CONFIG_NAME > + default "xilinx_mbv" > + > +config TEXT_BASE > + default 0x80000000 if !RISCV_SMODE > + default 0x80400000 if RISCV_SMODE && ARCH_RV32I > + The memory location of this board is at 0x20000000 but using 0x80000000 here and "CONFIG_SYS_LOAD_ADDR=0x80200000" in deconfig. Is the 0x80000000 memory location used for this board? Other than that: Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> > +config BOARD_SPECIFIC_OPTIONS > + def_bool y > + select GENERIC_RISCV > + imply BOARD_LATE_INIT > + imply CMD_SBI > + imply CMD_PING > + > +source "board/xilinx/Kconfig" > + > +endif > diff --git a/board/xilinx/mbv/MAINTAINERS > b/board/xilinx/mbv/MAINTAINERS > new file mode 100644 > index 000000000000..445654fe740e > --- /dev/null > +++ b/board/xilinx/mbv/MAINTAINERS > @@ -0,0 +1,7 @@ > +XILINX MicroBlaze V BOARD > +M: Michal Simek <michal.simek@amd.com> > +S: Maintained > +F: arch/riscv/dts/xilinx-mbv* > +F: board/xilinx/mbv/ > +F: configs/xilinx_mbv* > +F: include/configs/xilinx_mbv.h > diff --git a/board/xilinx/mbv/Makefile b/board/xilinx/mbv/Makefile > new file mode 100644 > index 000000000000..e2fc0c69715f > --- /dev/null > +++ b/board/xilinx/mbv/Makefile > @@ -0,0 +1,5 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# > +# (C) Copyright 2023, Advanced Micro Devices, Inc. > + > +obj-y += board.o > diff --git a/board/xilinx/mbv/board.c b/board/xilinx/mbv/board.c > new file mode 100644 > index 000000000000..ccf4395d6ace > --- /dev/null > +++ b/board/xilinx/mbv/board.c > @@ -0,0 +1,11 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * (C) Copyright 2023, Advanced Micro Devices, Inc. > + * > + * Michal Simek <michal.simek@amd.com> > + */ > + > +int board_init(void) > +{ > + return 0; > +} > diff --git a/configs/xilinx_mbv32_defconfig > b/configs/xilinx_mbv32_defconfig > new file mode 100644 > index 000000000000..2689495057b0 > --- /dev/null > +++ b/configs/xilinx_mbv32_defconfig > @@ -0,0 +1,30 @@ > +CONFIG_RISCV=y > +CONFIG_TEXT_BASE=0x21200000 > +CONFIG_SYS_MALLOC_LEN=0x800000 > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y > +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20200000 > +CONFIG_ENV_SIZE=0x20000 > +CONFIG_DEFAULT_DEVICE_TREE="xilinx-mbv32" > +CONFIG_DEBUG_UART_BASE=0x40600000 > +CONFIG_DEBUG_UART_CLOCK=1000000 > +CONFIG_SYS_CLK_FREQ=100000000 > +CONFIG_BOOT_SCRIPT_OFFSET=0x0 > +CONFIG_SYS_LOAD_ADDR=0x80200000 > +CONFIG_DEBUG_UART=y > +CONFIG_TARGET_XILINX_MBV=y > +CONFIG_FIT=y > +CONFIG_DISTRO_DEFAULTS=y > +CONFIG_DISPLAY_CPUINFO=y > +CONFIG_DISPLAY_BOARDINFO=y > +# CONFIG_BOARD_LATE_INIT is not set > +# CONFIG_CMD_MII is not set > +CONFIG_CMD_TIMER=y > +CONFIG_OF_EMBED=y > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_DM_MTD=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_SKIP_INIT=y > +CONFIG_XILINX_UARTLITE=y > +CONFIG_XILINX_TIMER=y > +CONFIG_PANIC_HANG=y > diff --git a/configs/xilinx_mbv32_smode_defconfig > b/configs/xilinx_mbv32_smode_defconfig > new file mode 100644 > index 000000000000..c724d1bad742 > --- /dev/null > +++ b/configs/xilinx_mbv32_smode_defconfig > @@ -0,0 +1,32 @@ > +CONFIG_RISCV=y > +CONFIG_TEXT_BASE=0x21200000 > +CONFIG_SYS_MALLOC_LEN=0x800000 > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y > +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20200000 > +CONFIG_ENV_SIZE=0x20000 > +CONFIG_DEFAULT_DEVICE_TREE="xilinx-mbv32" > +CONFIG_DEBUG_UART_BASE=0x40600000 > +CONFIG_DEBUG_UART_CLOCK=1000000 > +CONFIG_SYS_CLK_FREQ=100000000 > +CONFIG_BOOT_SCRIPT_OFFSET=0x0 > +CONFIG_SYS_LOAD_ADDR=0x80200000 > +CONFIG_TARGET_XILINX_MBV=y > +CONFIG_RISCV_SMODE=y > +CONFIG_FIT=y > +CONFIG_DISTRO_DEFAULTS=y > +CONFIG_DISPLAY_CPUINFO=y > +CONFIG_DISPLAY_BOARDINFO=y > +# CONFIG_BOARD_LATE_INIT is not set > +# CONFIG_CMD_MII is not set > +CONFIG_CMD_TIMER=y > +CONFIG_OF_EMBED=y > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_DM_MTD=y > +CONFIG_DEBUG_UART_UARTLITE=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_SKIP_INIT=y > +CONFIG_XILINX_UARTLITE=y > +# CONFIG_RISCV_TIMER is not set > +CONFIG_XILINX_TIMER=y > +CONFIG_PANIC_HANG=y > diff --git a/include/configs/xilinx_mbv.h > b/include/configs/xilinx_mbv.h > new file mode 100644 > index 000000000000..dba398aeec49 > --- /dev/null > +++ b/include/configs/xilinx_mbv.h > @@ -0,0 +1,6 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * (C) Copyright 2023, Advanced Micro Devices, Inc. > + * > + * Michal Simek <michal.simek@amd.com> > + */ > -- > 2.36.1 >
On 12/5/23 06:17, Padmarao.Begari@microchip.com wrote: > On Mon, 2023-11-06 at 12:56 +0100, Michal Simek wrote: >> EXTERNAL EMAIL: Do not click links or open attachments unless you >> know the content is safe >> >> MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP. >> It is hardware compatible with classic MicroBlaze processor. >> >> The patch contains initial wiring and configuration for initial HW >> design >> with memory, cpu, interrupt controller, timers and uartlite console >> (interrupt controller is listed but U-Boot is not using it). >> >> Provided DT is just describing one configuration and should be taken >> only >> as example. >> >> Signed-off-by: Michal Simek <michal.simek@amd.com> >> --- >> >> Changes in v2: >> - Extend commit message >> - DT changes, add interrupt controller, check agains dt schema >> - The patch for amd,mbv32 compatible string is here >> https://lore.kernel.org/r/d442d916204d26f82c1c3a924a4cdfb117960e1b.1699270661.git.michal.simek@amd.com >> - The patch for board compatibility is here >> https://lore.kernel.org/r/50c277c92c41a582ef171fb75efc6a6a4f860be2.1699271616.git.michal.simek@amd.com >> >> xlnx,xps-intc-1.00.a driver exists in the Linux kernel but DT binding >> is >> missing. That's something what we need to work on. >> arch/arm64/boot/dts/xilinx/xilinx-mbv32.dtb: >> /axi/interrupt-controller@41200000: failed to match any schema with >> compatible: ['xlnx,xps-intc-1.00.a'] >> >> Public annoucement is available here if someone is interested. >> https://www.xilinx.com/products/design-tools/microblaze-v.html?utm_source=marketo&utm_medium=email&utm_campaign=EN-EM-2023-11-02-New-MicroBlaze-V-Processor&utm_term=btn&mkt_tok=NDA5LVdZWC03MjQAAAGPMMJYuPPscCags7WdvOeUSWy-_mC9aOwrobFaZRf5ok_eHoQUvTLBzJdHrkcBId9tQ4a-odfnU91WjUkIxx-iSG4OKGofjK5iZcAiK_VN8_xK >> >> --- >> arch/riscv/Kconfig | 4 + >> arch/riscv/dts/Makefile | 2 + >> arch/riscv/dts/xilinx-mbv32.dts | 106 >> +++++++++++++++++++++++++++ >> board/xilinx/Kconfig | 3 +- >> board/xilinx/common/board.c | 5 ++ >> board/xilinx/mbv/Kconfig | 28 +++++++ >> board/xilinx/mbv/MAINTAINERS | 7 ++ >> board/xilinx/mbv/Makefile | 5 ++ >> board/xilinx/mbv/board.c | 11 +++ >> configs/xilinx_mbv32_defconfig | 30 ++++++++ >> configs/xilinx_mbv32_smode_defconfig | 32 ++++++++ >> include/configs/xilinx_mbv.h | 6 ++ >> 12 files changed, 238 insertions(+), 1 deletion(-) >> create mode 100644 arch/riscv/dts/xilinx-mbv32.dts >> create mode 100644 board/xilinx/mbv/Kconfig >> create mode 100644 board/xilinx/mbv/MAINTAINERS >> create mode 100644 board/xilinx/mbv/Makefile >> create mode 100644 board/xilinx/mbv/board.c >> create mode 100644 configs/xilinx_mbv32_defconfig >> create mode 100644 configs/xilinx_mbv32_smode_defconfig >> create mode 100644 include/configs/xilinx_mbv.h >> >> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig >> index 6d0d812ddb55..67126d96af89 100644 >> --- a/arch/riscv/Kconfig >> +++ b/arch/riscv/Kconfig >> @@ -39,6 +39,9 @@ config TARGET_TH1520_LPI4A >> bool "Support Sipeed's TH1520 Lichee PI 4A Board" >> select SYS_CACHE_SHIFT_6 >> >> +config TARGET_XILINX_MBV >> + bool "Support AMD/Xilinx MicroBlaze V" >> + >> endchoice >> >> config SYS_ICACHE_OFF >> @@ -82,6 +85,7 @@ source "board/sifive/unmatched/Kconfig" >> source "board/sipeed/maix/Kconfig" >> source "board/starfive/visionfive2/Kconfig" >> source "board/thead/th1520_lpi4a/Kconfig" >> +source "board/xilinx/mbv/Kconfig" >> >> # platform-specific options below >> source "arch/riscv/cpu/andesv5/Kconfig" >> diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile >> index be6c8a422729..b05bb5607f06 100644 >> --- a/arch/riscv/dts/Makefile >> +++ b/arch/riscv/dts/Makefile >> @@ -9,6 +9,8 @@ dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive- >> unmatched-a00.dtb >> dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb >> dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive- >> visionfive-2.dtb >> dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb >> +dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb >> + >> include $(srctree)/scripts/Makefile.dts >> >> targets += $(dtb-y) >> diff --git a/arch/riscv/dts/xilinx-mbv32.dts b/arch/riscv/dts/xilinx- >> mbv32.dts >> new file mode 100644 >> index 000000000000..6a6b8b694bd1 >> --- /dev/null >> +++ b/arch/riscv/dts/xilinx-mbv32.dts >> @@ -0,0 +1,106 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * dts file for AMD MicroBlaze V >> + * >> + * (C) Copyright 2023, Advanced Micro Devices, Inc. >> + * >> + * Michal Simek <michal.simek@amd.com> >> + */ >> + >> +/dts-v1/; >> +/ { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + model = "AMD MicroBlaze V 32bit"; >> + compatible = "amd,mbv"; >> + >> + cpus: cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + timebase-frequency = <102000000>; >> + cpu_0: cpu@0 { >> + compatible = "amd,mbv32", "riscv"; >> + device_type = "cpu"; >> + reg = <0>; >> + riscv,isa = "rv32imafdc"; >> + i-cache-size = <32768>; >> + d-cache-size = <32768>; >> + clock-frequency = <102000000>; >> + cpu0_intc: interrupt-controller { >> + compatible = "riscv,cpu-intc"; >> + interrupt-controller; >> + #interrupt-cells = <1>; >> + }; >> + }; >> + }; >> + >> + aliases { >> + serial0 = &uart0; >> + }; >> + >> + chosen { >> + bootargs = "earlycon"; >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + memory@20000000 { >> + device_type = "memory"; >> + reg = <0x20000000 0x20000000>; >> + }; >> + >> + clk102: clock { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <102000000>; >> + }; >> + >> + axi: axi { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "simple-bus"; >> + ranges; >> + bootph-all; >> + >> + axi_intc: interrupt-controller@41200000 { >> + compatible = "xlnx,xps-intc-1.00.a"; >> + reg = <0x41200000 0x1000>; >> + interrupt-controller; >> + interrupt-parent = <&cpu0_intc>; >> + #interrupt-cells = <2>; >> + kind-of-intr = <0>; >> + }; >> + >> + xlnx_timer0: timer@41c00000 { >> + compatible = "xlnx,xps-timer-1.00.a"; >> + reg = <0x41c00000 0x1000>; >> + interrupt-parent = <&axi_intc>; >> + interrupts = <1 2>; >> + bootph-all; >> + xlnx,one-timer-only = <0>; >> + clock-names = "s_axi_aclk"; >> + clocks = <&clk102>; >> + }; >> + >> + xlnx_timer1: timer@41c20000 { >> + compatible = "xlnx,xps-timer-1.00.a"; >> + reg = <0x41c20000 0x1000>; >> + interrupt-parent = <&axi_intc>; >> + interrupts = <0 2>; >> + xlnx,one-timer-only = <0>; >> + clock-names = "s_axi_aclk"; >> + clocks = <&clk102>; >> + }; >> + >> + uart0: serial@40600000 { >> + compatible = "xlnx,xps-uartlite-1.00.a"; >> + reg = <0x40600000 0x1000>; >> + interrupt-parent = <&axi_intc>; >> + interrupts = <2 2>; >> + bootph-all; >> + clocks = <&clk102>; >> + current-speed = <115200>; >> + xlnx,data-bits = <8>; >> + xlnx,use-parity = <0>; >> + }; >> + }; >> +}; >> diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig >> index 4f0776e8bd95..843198fa0da8 100644 >> --- a/board/xilinx/Kconfig >> +++ b/board/xilinx/Kconfig >> @@ -51,10 +51,11 @@ config XILINX_OF_BOARD_DTB_ADDR >> >> config BOOT_SCRIPT_OFFSET >> hex "Boot script offset" >> - depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || >> ARCH_VERSAL_NET || MICROBLAZE >> + depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || >> ARCH_VERSAL_NET || MICROBLAZE || TARGET_XILINX_MBV >> default 0xFC0000 if ARCH_ZYNQ || MICROBLAZE >> default 0x3E80000 if ARCH_ZYNQMP >> default 0x7F80000 if ARCH_VERSAL || ARCH_VERSAL_NET >> + default 0 if TARGET_XILINX_MBV >> help >> Specifies distro boot script offset in NAND/QSPI/NOR >> flash. >> >> diff --git a/board/xilinx/common/board.c >> b/board/xilinx/common/board.c >> index 9309b071269f..12a877c71549 100644 >> --- a/board/xilinx/common/board.c >> +++ b/board/xilinx/common/board.c >> @@ -652,6 +652,11 @@ int embedded_dtb_select(void) >> #endif >> >> #if defined(CONFIG_LMB) >> + >> +#ifndef MMU_SECTION_SIZE >> +#define MMU_SECTION_SIZE (1 * 1024 * 1024) >> +#endif >> + >> phys_addr_t board_get_usable_ram_top(phys_size_t total_size) >> { >> phys_size_t size; >> diff --git a/board/xilinx/mbv/Kconfig b/board/xilinx/mbv/Kconfig >> new file mode 100644 >> index 000000000000..4bc9f72c541b >> --- /dev/null >> +++ b/board/xilinx/mbv/Kconfig >> @@ -0,0 +1,28 @@ >> +if TARGET_XILINX_MBV >> + >> +config SYS_BOARD >> + default "mbv" >> + >> +config SYS_VENDOR >> + default "xilinx" >> + >> +config SYS_CPU >> + default "generic" >> + >> +config SYS_CONFIG_NAME >> + default "xilinx_mbv" >> + >> +config TEXT_BASE >> + default 0x80000000 if !RISCV_SMODE >> + default 0x80400000 if RISCV_SMODE && ARCH_RV32I >> + > The memory location of this board is at 0x20000000 but using 0x80000000 > here and "CONFIG_SYS_LOAD_ADDR=0x80200000" in deconfig. > Is the 0x80000000 memory location used for this board? > > Other than that: > Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> It is based on fpga design where main memory is. Maybe easier to simply not to define it and let every config to set it up self. Thanks, Michal
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 6d0d812ddb55..67126d96af89 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -39,6 +39,9 @@ config TARGET_TH1520_LPI4A bool "Support Sipeed's TH1520 Lichee PI 4A Board" select SYS_CACHE_SHIFT_6 +config TARGET_XILINX_MBV + bool "Support AMD/Xilinx MicroBlaze V" + endchoice config SYS_ICACHE_OFF @@ -82,6 +85,7 @@ source "board/sifive/unmatched/Kconfig" source "board/sipeed/maix/Kconfig" source "board/starfive/visionfive2/Kconfig" source "board/thead/th1520_lpi4a/Kconfig" +source "board/xilinx/mbv/Kconfig" # platform-specific options below source "arch/riscv/cpu/andesv5/Kconfig" diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile index be6c8a422729..b05bb5607f06 100644 --- a/arch/riscv/dts/Makefile +++ b/arch/riscv/dts/Makefile @@ -9,6 +9,8 @@ dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive-visionfive-2.dtb dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb +dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb + include $(srctree)/scripts/Makefile.dts targets += $(dtb-y) diff --git a/arch/riscv/dts/xilinx-mbv32.dts b/arch/riscv/dts/xilinx-mbv32.dts new file mode 100644 index 000000000000..6a6b8b694bd1 --- /dev/null +++ b/arch/riscv/dts/xilinx-mbv32.dts @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for AMD MicroBlaze V + * + * (C) Copyright 2023, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */ + +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "AMD MicroBlaze V 32bit"; + compatible = "amd,mbv"; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <102000000>; + cpu_0: cpu@0 { + compatible = "amd,mbv32", "riscv"; + device_type = "cpu"; + reg = <0>; + riscv,isa = "rv32imafdc"; + i-cache-size = <32768>; + d-cache-size = <32768>; + clock-frequency = <102000000>; + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; + + clk102: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <102000000>; + }; + + axi: axi { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + bootph-all; + + axi_intc: interrupt-controller@41200000 { + compatible = "xlnx,xps-intc-1.00.a"; + reg = <0x41200000 0x1000>; + interrupt-controller; + interrupt-parent = <&cpu0_intc>; + #interrupt-cells = <2>; + kind-of-intr = <0>; + }; + + xlnx_timer0: timer@41c00000 { + compatible = "xlnx,xps-timer-1.00.a"; + reg = <0x41c00000 0x1000>; + interrupt-parent = <&axi_intc>; + interrupts = <1 2>; + bootph-all; + xlnx,one-timer-only = <0>; + clock-names = "s_axi_aclk"; + clocks = <&clk102>; + }; + + xlnx_timer1: timer@41c20000 { + compatible = "xlnx,xps-timer-1.00.a"; + reg = <0x41c20000 0x1000>; + interrupt-parent = <&axi_intc>; + interrupts = <0 2>; + xlnx,one-timer-only = <0>; + clock-names = "s_axi_aclk"; + clocks = <&clk102>; + }; + + uart0: serial@40600000 { + compatible = "xlnx,xps-uartlite-1.00.a"; + reg = <0x40600000 0x1000>; + interrupt-parent = <&axi_intc>; + interrupts = <2 2>; + bootph-all; + clocks = <&clk102>; + current-speed = <115200>; + xlnx,data-bits = <8>; + xlnx,use-parity = <0>; + }; + }; +}; diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index 4f0776e8bd95..843198fa0da8 100644 --- a/board/xilinx/Kconfig +++ b/board/xilinx/Kconfig @@ -51,10 +51,11 @@ config XILINX_OF_BOARD_DTB_ADDR config BOOT_SCRIPT_OFFSET hex "Boot script offset" - depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || MICROBLAZE + depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_VERSAL_NET || MICROBLAZE || TARGET_XILINX_MBV default 0xFC0000 if ARCH_ZYNQ || MICROBLAZE default 0x3E80000 if ARCH_ZYNQMP default 0x7F80000 if ARCH_VERSAL || ARCH_VERSAL_NET + default 0 if TARGET_XILINX_MBV help Specifies distro boot script offset in NAND/QSPI/NOR flash. diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c index 9309b071269f..12a877c71549 100644 --- a/board/xilinx/common/board.c +++ b/board/xilinx/common/board.c @@ -652,6 +652,11 @@ int embedded_dtb_select(void) #endif #if defined(CONFIG_LMB) + +#ifndef MMU_SECTION_SIZE +#define MMU_SECTION_SIZE (1 * 1024 * 1024) +#endif + phys_addr_t board_get_usable_ram_top(phys_size_t total_size) { phys_size_t size; diff --git a/board/xilinx/mbv/Kconfig b/board/xilinx/mbv/Kconfig new file mode 100644 index 000000000000..4bc9f72c541b --- /dev/null +++ b/board/xilinx/mbv/Kconfig @@ -0,0 +1,28 @@ +if TARGET_XILINX_MBV + +config SYS_BOARD + default "mbv" + +config SYS_VENDOR + default "xilinx" + +config SYS_CPU + default "generic" + +config SYS_CONFIG_NAME + default "xilinx_mbv" + +config TEXT_BASE + default 0x80000000 if !RISCV_SMODE + default 0x80400000 if RISCV_SMODE && ARCH_RV32I + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select GENERIC_RISCV + imply BOARD_LATE_INIT + imply CMD_SBI + imply CMD_PING + +source "board/xilinx/Kconfig" + +endif diff --git a/board/xilinx/mbv/MAINTAINERS b/board/xilinx/mbv/MAINTAINERS new file mode 100644 index 000000000000..445654fe740e --- /dev/null +++ b/board/xilinx/mbv/MAINTAINERS @@ -0,0 +1,7 @@ +XILINX MicroBlaze V BOARD +M: Michal Simek <michal.simek@amd.com> +S: Maintained +F: arch/riscv/dts/xilinx-mbv* +F: board/xilinx/mbv/ +F: configs/xilinx_mbv* +F: include/configs/xilinx_mbv.h diff --git a/board/xilinx/mbv/Makefile b/board/xilinx/mbv/Makefile new file mode 100644 index 000000000000..e2fc0c69715f --- /dev/null +++ b/board/xilinx/mbv/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# (C) Copyright 2023, Advanced Micro Devices, Inc. + +obj-y += board.o diff --git a/board/xilinx/mbv/board.c b/board/xilinx/mbv/board.c new file mode 100644 index 000000000000..ccf4395d6ace --- /dev/null +++ b/board/xilinx/mbv/board.c @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2023, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */ + +int board_init(void) +{ + return 0; +} diff --git a/configs/xilinx_mbv32_defconfig b/configs/xilinx_mbv32_defconfig new file mode 100644 index 000000000000..2689495057b0 --- /dev/null +++ b/configs/xilinx_mbv32_defconfig @@ -0,0 +1,30 @@ +CONFIG_RISCV=y +CONFIG_TEXT_BASE=0x21200000 +CONFIG_SYS_MALLOC_LEN=0x800000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20200000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="xilinx-mbv32" +CONFIG_DEBUG_UART_BASE=0x40600000 +CONFIG_DEBUG_UART_CLOCK=1000000 +CONFIG_SYS_CLK_FREQ=100000000 +CONFIG_BOOT_SCRIPT_OFFSET=0x0 +CONFIG_SYS_LOAD_ADDR=0x80200000 +CONFIG_DEBUG_UART=y +CONFIG_TARGET_XILINX_MBV=y +CONFIG_FIT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +# CONFIG_BOARD_LATE_INIT is not set +# CONFIG_CMD_MII is not set +CONFIG_CMD_TIMER=y +CONFIG_OF_EMBED=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM_MTD=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_XILINX_UARTLITE=y +CONFIG_XILINX_TIMER=y +CONFIG_PANIC_HANG=y diff --git a/configs/xilinx_mbv32_smode_defconfig b/configs/xilinx_mbv32_smode_defconfig new file mode 100644 index 000000000000..c724d1bad742 --- /dev/null +++ b/configs/xilinx_mbv32_smode_defconfig @@ -0,0 +1,32 @@ +CONFIG_RISCV=y +CONFIG_TEXT_BASE=0x21200000 +CONFIG_SYS_MALLOC_LEN=0x800000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20200000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_DEFAULT_DEVICE_TREE="xilinx-mbv32" +CONFIG_DEBUG_UART_BASE=0x40600000 +CONFIG_DEBUG_UART_CLOCK=1000000 +CONFIG_SYS_CLK_FREQ=100000000 +CONFIG_BOOT_SCRIPT_OFFSET=0x0 +CONFIG_SYS_LOAD_ADDR=0x80200000 +CONFIG_TARGET_XILINX_MBV=y +CONFIG_RISCV_SMODE=y +CONFIG_FIT=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +# CONFIG_BOARD_LATE_INIT is not set +# CONFIG_CMD_MII is not set +CONFIG_CMD_TIMER=y +CONFIG_OF_EMBED=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM_MTD=y +CONFIG_DEBUG_UART_UARTLITE=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_XILINX_UARTLITE=y +# CONFIG_RISCV_TIMER is not set +CONFIG_XILINX_TIMER=y +CONFIG_PANIC_HANG=y diff --git a/include/configs/xilinx_mbv.h b/include/configs/xilinx_mbv.h new file mode 100644 index 000000000000..dba398aeec49 --- /dev/null +++ b/include/configs/xilinx_mbv.h @@ -0,0 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2023, Advanced Micro Devices, Inc. + * + * Michal Simek <michal.simek@amd.com> + */
MicroBlaze V is new AMD/Xilinx soft-core 32bit RISC-V processor IP. It is hardware compatible with classic MicroBlaze processor. The patch contains initial wiring and configuration for initial HW design with memory, cpu, interrupt controller, timers and uartlite console (interrupt controller is listed but U-Boot is not using it). Provided DT is just describing one configuration and should be taken only as example. Signed-off-by: Michal Simek <michal.simek@amd.com> --- Changes in v2: - Extend commit message - DT changes, add interrupt controller, check agains dt schema - The patch for amd,mbv32 compatible string is here https://lore.kernel.org/r/d442d916204d26f82c1c3a924a4cdfb117960e1b.1699270661.git.michal.simek@amd.com - The patch for board compatibility is here https://lore.kernel.org/r/50c277c92c41a582ef171fb75efc6a6a4f860be2.1699271616.git.michal.simek@amd.com xlnx,xps-intc-1.00.a driver exists in the Linux kernel but DT binding is missing. That's something what we need to work on. arch/arm64/boot/dts/xilinx/xilinx-mbv32.dtb: /axi/interrupt-controller@41200000: failed to match any schema with compatible: ['xlnx,xps-intc-1.00.a'] Public annoucement is available here if someone is interested. https://www.xilinx.com/products/design-tools/microblaze-v.html?utm_source=marketo&utm_medium=email&utm_campaign=EN-EM-2023-11-02-New-MicroBlaze-V-Processor&utm_term=btn&mkt_tok=NDA5LVdZWC03MjQAAAGPMMJYuPPscCags7WdvOeUSWy-_mC9aOwrobFaZRf5ok_eHoQUvTLBzJdHrkcBId9tQ4a-odfnU91WjUkIxx-iSG4OKGofjK5iZcAiK_VN8_xK --- arch/riscv/Kconfig | 4 + arch/riscv/dts/Makefile | 2 + arch/riscv/dts/xilinx-mbv32.dts | 106 +++++++++++++++++++++++++++ board/xilinx/Kconfig | 3 +- board/xilinx/common/board.c | 5 ++ board/xilinx/mbv/Kconfig | 28 +++++++ board/xilinx/mbv/MAINTAINERS | 7 ++ board/xilinx/mbv/Makefile | 5 ++ board/xilinx/mbv/board.c | 11 +++ configs/xilinx_mbv32_defconfig | 30 ++++++++ configs/xilinx_mbv32_smode_defconfig | 32 ++++++++ include/configs/xilinx_mbv.h | 6 ++ 12 files changed, 238 insertions(+), 1 deletion(-) create mode 100644 arch/riscv/dts/xilinx-mbv32.dts create mode 100644 board/xilinx/mbv/Kconfig create mode 100644 board/xilinx/mbv/MAINTAINERS create mode 100644 board/xilinx/mbv/Makefile create mode 100644 board/xilinx/mbv/board.c create mode 100644 configs/xilinx_mbv32_defconfig create mode 100644 configs/xilinx_mbv32_smode_defconfig create mode 100644 include/configs/xilinx_mbv.h