Message ID | alpine.LFD.2.00.1104291034280.4006@right.am.freescale.net |
---|---|
State | Superseded |
Headers | show |
On Fri, Apr 29, 2011 at 10:34 AM, Kumar Gala <galak@kernel.crashing.org> wrote: > Timur Tabi (7): > powerpc/86xx: remove empty board_early_init_f() > powerpc/fsl: add 'pixis_reset dump' command > powerpc/85xx: Implement work-around for P4080 erratum SERDES-A005 > powerpc/85xx: Display SERDES 8 erratum warning if banks are not disabled > powerpc/85xx: Extend SERDES9 erratum work-around to SGMII, SRIO, and AURORA > powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001 > powerpc/85xx: fix compatible property for the L2 cache node What about this patch: http://patchwork.ozlabs.org/patch/71614/ It was ACK'd by gvb: http://lists.denx.de/pipermail/u-boot/2011-April/089791.html
On Apr 29, 2011, at 12:36 PM, Tabi Timur-B04825 wrote: > > What about this patch: > > http://patchwork.ozlabs.org/patch/71614/ > > It was ACK'd by gvb: > > http://lists.denx.de/pipermail/u-boot/2011-April/089791.html I'd rather we just fix the addresses up rather than verifying them. - k
On Fri, 29 Apr 2011 15:16:59 -0500 Kumar Gala <galak@kernel.crashing.org> wrote: > > On Apr 29, 2011, at 12:36 PM, Tabi Timur-B04825 wrote: > > > > > What about this patch: > > > > http://patchwork.ozlabs.org/patch/71614/ > > > > It was ACK'd by gvb: > > > > http://lists.denx.de/pipermail/u-boot/2011-April/089791.html > > I'd rather we just fix the addresses up rather than verifying them. As I pointed out before, you can't fix up every possible error. If someone passes a 32-bit device tree to a 36-bit U-Boot, we can't fix that up sanely. But we can detect it, and give a useful message rather than a hang. Perhaps some subset of the things that are checked (e.g. PCI addresses) would me more appropriately updated by U-Boot, though. -Scott
On Apr 29, 2011, at 10:34 AM, Kumar Gala wrote: > The following changes since commit a000b7950da938d2df37ec5e081cd0680e6e4bbe: > > common: add a grepenv command (2011-04-28 01:00:07 +0200) > > are available in the git repository at: > git://git.denx.de/u-boot-mpc85xx.git master Did another push to drop: * powerpc/85xx: fix compatible property for the L2 cache node - k > > Andy Fleming (1): > tsec: Fix MDIO on devices with eTSEC2 > > Dipen Dudhat (2): > powerpc/85xx: Change CS timing params before changing CS properties on IFC > powerpc/85xx: Added PMUXCR1 and PMUXCR2 defines for P1010/P1014 SoC > > Emil Medve (2): > powerpc/85xx: fsl_corenet_serdes code rework > p4080/serdes: Implement the XAUI workaround for SERDES9 erratum > > Haiying Wang (1): > powerpc/85xx: Add device tree fixup for bman portal > > Jerry Huang (1): > powerpc/85xx: Enable eSPI controller & SPI boot support on P2020DS > > Jiang Yutang (1): > powerpc/85xx: Enable eSPI support on P1022DS > > Kim Phillips (1): > powerpc/85xx: handle both "secX.Y" and "sec-vX.Y" properties > > Kumar Gala (3): > powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code) > powerpc/85xx: Change timebase divisor to be defined per processor > powerpc/85xx: Bump up the CONFIG_SYS_BOOTM_LEN to 64M on FSL 85xx boards > > Kyle Moffett (1): > fsl-ddr: Fix mixed-case macro names > > Lei Xu (1): > powerpc/85xx: Enable ESDHC111 erratum on P2040/P3041/P5010/P5020 SoCs > > Matthew McClintock (1): > powerpc/85xx: Don't set FT_FSL_PCI_SETUP if CONFIG_PCI is not set > > Mingkai Hu (1): > powerpc: eSPI and eSPI controller support > > Priyanka Jain (2): > powerpc/85xx: Add support to save environment in SD card on p1_p2_rdb > powerpc/85xx: Enable eSPI support for p1_p2_rdb > > Ramneek Mehresh (1): > powerpc/85xx: Add support for 2nd USB controller on p1_p2_rdb > > Roy Zang (1): > powerpc/85xx: Enable Internal USB PHY for p2040, p3041, p5010 and p5020 > > Timur Tabi (7): > powerpc/86xx: remove empty board_early_init_f() > powerpc/fsl: add 'pixis_reset dump' command > powerpc/85xx: Implement work-around for P4080 erratum SERDES-A005 > powerpc/85xx: Display SERDES 8 erratum warning if banks are not disabled > powerpc/85xx: Extend SERDES9 erratum work-around to SGMII, SRIO, and AURORA > powerpc/85xx: Implement work-around for P4080 erratum SERDES-A001 > powerpc/85xx: fix compatible property for the L2 cache node > > Trübenbach, Ralf (1): > powerpc/85xx: Fix Wrong PCIe 3 virtual address on corenet_ds platforms > > README | 7 + > arch/powerpc/cpu/mpc85xx/cmd_errata.c | 6 + > arch/powerpc/cpu/mpc85xx/cpu.c | 11 +- > arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 ++ > arch/powerpc/cpu/mpc85xx/fdt.c | 14 +- > arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 315 +++++++++++++++++++++-- > arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 2 +- > arch/powerpc/cpu/mpc85xx/portals.c | 30 +++ > arch/powerpc/cpu/mpc8xxx/ddr/util.c | 18 +- > arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 31 ++-- > arch/powerpc/include/asm/config.h | 7 + > arch/powerpc/include/asm/config_mpc85xx.h | 21 ++ > arch/powerpc/include/asm/fsl_liodn.h | 13 + > arch/powerpc/include/asm/fsl_pci.h | 4 +- > arch/powerpc/include/asm/fsl_portals.h | 3 +- > arch/powerpc/include/asm/fsl_serdes.h | 7 + > arch/powerpc/include/asm/immap_85xx.h | 89 +++++++ > board/freescale/common/Makefile | 2 + > board/freescale/common/ngpixis.c | 58 +++++ > board/freescale/common/ngpixis.h | 7 +- > board/freescale/corenet_ds/Makefile | 2 + > board/freescale/corenet_ds/corenet_ds.c | 45 +++- > board/freescale/corenet_ds/law.c | 5 +- > board/freescale/corenet_ds/p3041ds_ddr.c | 14 + > board/freescale/corenet_ds/p5020ds_ddr.c | 18 ++ > board/freescale/corenet_ds/tlb.c | 10 + > board/freescale/mpc8641hpcn/mpc8641hpcn.c | 5 - > board/freescale/p1022ds/p1022ds.c | 3 + > board/freescale/p1_p2_rdb/p1_p2_rdb.c | 14 + > boards.cfg | 3 + > drivers/spi/Makefile | 1 + > drivers/spi/fsl_espi.c | 334 +++++++++++++++++++++++++ > include/configs/MPC8536DS.h | 6 +- > include/configs/MPC8540ADS.h | 6 +- > include/configs/MPC8541CDS.h | 6 +- > include/configs/MPC8544DS.h | 6 +- > include/configs/MPC8548CDS.h | 6 +- > include/configs/MPC8555CDS.h | 6 +- > include/configs/MPC8560ADS.h | 6 +- > include/configs/MPC8568MDS.h | 6 +- > include/configs/MPC8569MDS.h | 6 +- > include/configs/MPC8572DS.h | 6 +- > include/configs/MPC8641HPCN.h | 2 - > include/configs/P1022DS.h | 21 ++- > include/configs/P1_P2_RDB.h | 31 ++- > include/configs/P2020DS.h | 34 +++- > include/configs/P3041DS.h | 37 +++ > include/configs/P5020DS.h | 37 +++ > include/configs/corenet_ds.h | 46 +++- > include/spi.h | 7 - > include/tsec.h | 2 +- > 51 files changed, 1259 insertions(+), 134 deletions(-) > create mode 100644 board/freescale/corenet_ds/p3041ds_ddr.c > create mode 100644 board/freescale/corenet_ds/p5020ds_ddr.c > create mode 100644 drivers/spi/fsl_espi.c > create mode 100644 include/configs/P3041DS.h > create mode 100644 include/configs/P5020DS.h > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot
Dear Kumar Gala, In message <alpine.LFD.2.00.1104291034280.4006@right.am.freescale.net> you wrote: > > The following changes since commit a000b7950da938d2df37ec5e081cd0680e6e4bbe: > > common: add a grepenv command (2011-04-28 01:00:07 +0200) > > are available in the git repository at: > git://git.denx.de/u-boot-mpc85xx.git master NAK. I refuse to pull. I object against pulling in patches without any chance of a review. Please don't do this again. Best regards, Wolfgang Denk
On Apr 29, 2011, at 3:35 PM, Wolfgang Denk wrote: > Dear Kumar Gala, > > In message <alpine.LFD.2.00.1104291034280.4006@right.am.freescale.net> you wrote: >> >> The following changes since commit a000b7950da938d2df37ec5e081cd0680e6e4bbe: >> >> common: add a grepenv command (2011-04-28 01:00:07 +0200) >> >> are available in the git repository at: >> git://git.denx.de/u-boot-mpc85xx.git master > > NAK. I refuse to pull. > > I object against pulling in patches without any chance of a review. > Please don't do this again. I understand, I've dropped the patch. I need to go back to my one-week rule. - k
Dear Kumar Gala, In message <40B22ACD-651C-4765-BA19-421D3ABE10B6@kernel.crashing.org> you wrote: > > Did another push to drop: > > * powerpc/85xx: fix compatible property for the L2 cache node Please send a new pull req when all is ready. Thanks. Best regards, Wolfgang Denk