@@ -1034,8 +1034,8 @@ ifneq ($(CONFIG_HAVE_CMC),)
IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
endif
-ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE)
+ifneq ($(CONFIG_HAVE_VGA_BIOS),)
+IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
endif
quiet_cmd_ifdtool = IFDTOOL $@
@@ -293,6 +293,28 @@ config TSC_FREQ_IN_MHZ
help
The running frequency in MHz of Time-Stamp Counter (TSC).
+config HAVE_VGA_BIOS
+ bool "Add a VGA BIOS image"
+ help
+ Select this option if you have a VGA BIOS image that you would
+ like to add to your ROM.
+
+config VGA_BIOS_FILE
+ string "VGA BIOS image filename"
+ depends on HAVE_VGA_BIOS
+ default "vga.bin"
+ help
+ The filename of the VGA BIOS image in the board directory.
+
+config VGA_BIOS_ADDR
+ hex "VGA BIOS image location"
+ depends on HAVE_VGA_BIOS
+ default 0xfff90000
+ help
+ The location of VGA BIOS image in the SPI flash. For example, base
+ address of 0xfff90000 indicates that the image will be put at offset
+ 0x90000 from the beginning of a 1MB flash device.
+
menu "System tables"
config GENERATE_PIRQ_TABLE
@@ -3,6 +3,7 @@ CONFIG_VENDOR_GOOGLE=y
CONFIG_DEFAULT_DEVICE_TREE="chromebook_link"
CONFIG_TARGET_CHROMEBOOK_LINK=y
CONFIG_HAVE_MRC=y
+CONFIG_HAVE_VGA_BIOS=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CMD_NET=y
@@ -3,6 +3,7 @@ CONFIG_VENDOR_GOOGLE=y
CONFIG_DEFAULT_DEVICE_TREE="chromebox_panther"
CONFIG_TARGET_CHROMEBOX_PANTHER=y
CONFIG_HAVE_MRC=y
+CONFIG_HAVE_VGA_BIOS=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
CONFIG_CMD_NET=y
@@ -3,6 +3,7 @@ CONFIG_VENDOR_INTEL=y
CONFIG_DEFAULT_DEVICE_TREE="minnowmax"
CONFIG_TARGET_MINNOWMAX=y
CONFIG_HAVE_INTEL_ME=y
+CONFIG_HAVE_VGA_BIOS=y
CONFIG_VIDEO_VESA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11A=y
@@ -79,7 +79,7 @@ Find the following files:
* ./northbridge/intel/sandybridge/systemagent-r6.bin
The 3rd one should be renamed to mrc.bin.
-As for the video ROM, you can get it here [3].
+As for the video ROM, you can get it here [3] and rename it to vga.bin.
Make sure all these binary blobs are put in the board directory.
Now you can build U-Boot and obtain u-boot.rom:
@@ -79,8 +79,8 @@ static int pci_rom_probe(pci_dev_t dev, uint class,
if (vendev != mapped_vendev)
debug("Device ID mapped to %#08x\n", mapped_vendev);
-#ifdef CONFIG_X86_OPTION_ROM_ADDR
- rom_address = CONFIG_X86_OPTION_ROM_ADDR;
+#ifdef CONFIG_VGA_BIOS_ADDR
+ rom_address = CONFIG_VGA_BIOS_ADDR;
#else
pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_address);
@@ -103,7 +103,7 @@ static int pci_rom_probe(pci_dev_t dev, uint class,
if (le16_to_cpu(rom_header->signature) != PCI_ROM_HDR) {
printf("Incorrect expansion ROM header signature %04x\n",
le16_to_cpu(rom_header->signature));
-#ifndef CONFIG_X86_OPTION_ROM_ADDR
+#ifndef CONFIG_VGA_BIOS_ADDR
/* Disable expansion ROM address decoding */
pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address);
#endif
@@ -52,9 +52,6 @@
#undef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_X86_OPTION_ROM_FILE vga.bin
-#define CONFIG_X86_OPTION_ROM_ADDR 0xfff90000
-
#define VIDEO_IO_OFFSET 0
#define CONFIG_X86EMU_RAW_IO
#define CONFIG_VGA_AS_SINGLE_DEVICE
@@ -26,9 +26,6 @@
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}, \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_AHCI}
-#define CONFIG_X86_OPTION_ROM_FILE pci8086,0166.bin
-#define CONFIG_X86_OPTION_ROM_ADDR 0xfff90000
-
#define CONFIG_PCI_MEM_BUS 0xe0000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x10000000