| Message ID | 9703d063-e14c-5b08-1195-0038425c01a7@denx.de |
|---|---|
| State | Deferred |
| Delegated to: | Tom Rini |
| Headers | show |
On Mon, Feb 27, 2017 at 10:12:59AM +0100, Stefano Babic wrote: > Hi Tom, > > please pull from u-boot-imx, thanks ! > > The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3: > > video: mxsfb: Fix reset hang when videomode variable is not present > (2017-02-22 21:47:59 +0100) > > are available in the git repository at: > > git://www.denx.de/git/u-boot-imx.git master > > for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8: > > i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22 > +0100) > > ---------------------------------------------------------------- > Andrey Yurovsky (1): > mtd: nand: build MXS driver for MX7 as well > > Jagan Teki (25): > configs: imx6: Don't define USDHC2_BASE_ADDR > arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support > arm: dts: imx6ul-isiot: Add I2C nodes > imx6: isiotmx6ul: Add I2C support > arm: dts: imx6ul-isiot: Add FEC node > imx6: isiotmx6ul: Add FEC support > imx6: isiotmx6ul: Add NAND support > imx6: isiotmx6ul: Add nandboot env support > imx6ul: isiotmx6ul: Enable I2C support > i.MX6: engicam: Include dts files under MAINTAINERS > imx6: Add imx6_src_get_boot_mode > imx: spl: Update NAND bootmode detection bit > imx: Use IMX6_BMODE_* macros instead of numericals > imx6: Add src_base structure define macro > imx6: isiotmx6ul: Update SPL board boot order for eMMC > i.MX6UL: isiot: Add eMMC boot support > i.MX6UL: isiot: Add modeboot env via board_late_init > i.MX6UL: isiot: Add mmc_late_init > i.MX6UL: isiot: Switch the mmc env based on devno > arm: dts: imx6qdl-icore-rqs: Add eMMC node > imx6: icorem6_rqs: Update SPL board boot order for eMMC > imx6: icorem6_rqs: Add eMMC boot support > i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init > i.MX6Q: icorem6_rqs: Add mmc_late_init > i.MX6Q: isiot: Switch the mmc env based on devno > > Markus Niebel (13): > arm: imx6: tqma6: add configurable CMA size > imx6: tqma6: rely on default setting for tftp and nfs > mx6: tqma6: fix typo in env > mx6: tqma6: add rootfsmode environment for mmc / sd > tqma6: fix rounding in env > tqma6: [cosmetic] sanitize environment defines > arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settings > arm: imx6: tqma6: add support for TQMa6DL variant > imx6: tqma6: implement power_init_board > imx6: tqma6: use lower driver stength for I2C pins > imx6: tqma6: disable spi CS unused in U-Boot > imx6: tqma6: adjust ethernet phy reset delay > mx6: tqma6: clear enet clk sel for mba6 > > Peng Fan (16): > imx: mx7ulp: Add mx7ulp to Kconfig > imx: mx7ulp: add registers header file > imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1 > imx: mx7ulp: Add clock framework and functions > imx: mx7ulp: Add soc level initialization codes and functions > gpio: Add Rapid GPIO2P driver for i.MX7ULP > mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP > pinctrl: Add i.MX7ULP pinctrl driver > i2c: lpi2c: add lpi2c driver for i.MX7ULP > serial: lpuart: restructure lpuart driver > serial: lpuart: add i.MX7ULP support > mx7ulp: Add HAB boot support > arm: dts: add i.MX7ULP dtsi file > mmc: fsl_esdhc: support i.MX7ULP > imx: imx7ulp: add EVK board support > imx: mx7ulp_evk: enable mmc/regulator support > > Peter Robinson (3): > mx6sx: udoo_neo: Define the default serial console > mx6sx: udoo_neo: use different load address for ramdisk > mx6sx: udoo_neo: Enable distro boot options in config > > Stefano Babic (1): > Merge branch 'master' of git://git.denx.de/u-boot > > Ye Li (3): > imx: mx7ulp: Implement the clock functions for i2c driver > mx7ulp: Add iomux pins header file > wdog: Add the watchdog driver for MX7ULP. > > arch/arm/Kconfig | 7 + > arch/arm/Makefile | 2 +- > arch/arm/cpu/armv7/Makefile | 3 +- > arch/arm/cpu/armv7/mx6/Kconfig | 12 + > arch/arm/cpu/armv7/mx7ulp/Kconfig | 17 ++ > arch/arm/cpu/armv7/mx7ulp/Makefile | 8 + > arch/arm/cpu/armv7/mx7ulp/clock.c | 365 > +++++++++++++++++++++++++++ > arch/arm/cpu/armv7/mx7ulp/iomux.c | 70 ++++++ > arch/arm/cpu/armv7/mx7ulp/pcc.c | 286 > +++++++++++++++++++++ > arch/arm/cpu/armv7/mx7ulp/scg.c | 1086 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > arch/arm/cpu/armv7/mx7ulp/soc.c | 247 > ++++++++++++++++++ > arch/arm/cpu/armv7/vf610/generic.c | 5 + > arch/arm/dts/Makefile | 7 +- > arch/arm/dts/imx6qdl-icore-rqs.dtsi | 22 ++ > arch/arm/dts/imx6ul-isiot-emmc.dts | 77 ++++++ > arch/arm/dts/imx6ul-isiot-mmc.dts | 50 ++++ > arch/arm/dts/imx6ul-isiot-nand.dts | 50 ++++ > arch/arm/dts/imx6ul-isiot.dtsi | 142 +++++++++++ > arch/arm/dts/imx7ulp-evk.dts | 426 > +++++++++++++++++++++++++++++++ > arch/arm/dts/imx7ulp-pinfunc.h | 882 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > arch/arm/dts/imx7ulp-uboot.dtsi | 43 ++++ > arch/arm/dts/imx7ulp.dtsi | 598 > +++++++++++++++++++++++++++++++++++++++++++ > arch/arm/imx-common/Makefile | 4 + > arch/arm/imx-common/hab.c | 3 +- > arch/arm/imx-common/init.c | 10 + > arch/arm/imx-common/spl.c | 49 ++-- > arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h | 42 ---- > arch/arm/include/asm/arch-imx/cpu.h | 2 + > arch/arm/include/asm/arch-ls102xa/imx-regs.h | 40 --- > arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + > arch/arm/include/asm/arch-mx7ulp/clock.h | 43 ++++ > arch/arm/include/asm/arch-mx7ulp/gpio.h | 22 ++ > arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 1120 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > arch/arm/include/asm/arch-mx7ulp/imx_lpi2c.h | 520 > ++++++++++++++++++++++++++++++++++++++ > arch/arm/include/asm/arch-mx7ulp/iomux.h | 95 +++++++ > arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h | 910 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > arch/arm/include/asm/arch-mx7ulp/pcc.h | 373 > +++++++++++++++++++++++++++ > arch/arm/include/asm/arch-mx7ulp/scg.h | 342 > +++++++++++++++++++++++++ > arch/arm/include/asm/arch-mx7ulp/sys_proto.h | 21 ++ > arch/arm/include/asm/arch-vf610/clock.h | 1 + > arch/arm/include/asm/arch-vf610/imx-regs.h | 28 --- > arch/arm/include/asm/imx-common/sys_proto.h | 49 ++++ > board/engicam/geam6ul/MAINTAINERS | 1 + > board/engicam/icorem6/MAINTAINERS | 3 + > board/engicam/icorem6_rqs/MAINTAINERS | 3 + > board/engicam/icorem6_rqs/icorem6_rqs.c | 96 ++++++- > board/engicam/isiotmx6ul/Kconfig | 12 + > board/engicam/isiotmx6ul/MAINTAINERS | 12 + > board/engicam/isiotmx6ul/Makefile | 6 + > board/engicam/isiotmx6ul/README | 28 +++ > board/engicam/isiotmx6ul/isiotmx6ul.c | 414 > ++++++++++++++++++++++++++++++ > board/freescale/mx7ulp_evk/Kconfig | 12 + > board/freescale/mx7ulp_evk/MAINTAINERS | 7 + > board/freescale/mx7ulp_evk/Makefile | 10 + > board/freescale/mx7ulp_evk/imximage.cfg | 137 ++++++++++ > board/freescale/mx7ulp_evk/mx7ulp_evk.c | 48 ++++ > board/freescale/mx7ulp_evk/plugin.S | 224 > +++++++++++++++++ > board/tqc/tqma6/Kconfig | 7 + > board/tqc/tqma6/README | 3 + > board/tqc/tqma6/tqma6.c | 31 ++- > board/tqc/tqma6/tqma6_mba6.c | 47 ++-- > board/tqc/tqma6/tqma6dl.cfg | 125 +++++++++ > configs/imx6dl_icore_rqs_mmc_defconfig | 1 + > configs/imx6q_icore_rqs_mmc_defconfig | 1 + > configs/imx6ul_isiot_emmc_defconfig | 40 +++ > configs/imx6ul_isiot_mmc_defconfig | 42 ++++ > configs/imx6ul_isiot_nand_defconfig | 43 ++++ > configs/mx7ulp_evk_defconfig | 25 ++ > configs/mx7ulp_evk_plugin_defconfig | 26 ++ > configs/tqma6dl_mba6_mmc_defconfig | 36 +++ > configs/tqma6dl_mba6_spi_defconfig | 37 +++ > configs/udoo_neo_defconfig | 11 +- > drivers/gpio/Kconfig | 7 + > drivers/gpio/Makefile | 1 + > drivers/gpio/imx_rgpio2p.c | 224 > +++++++++++++++++ > drivers/i2c/Kconfig | 6 + > drivers/i2c/Makefile | 1 + > drivers/i2c/imx_lpi2c.c | 462 > ++++++++++++++++++++++++++++++++++ > drivers/misc/mxc_ocotp.c | 52 +++- > drivers/mmc/fsl_esdhc.c | 8 + > drivers/mtd/nand/Kconfig | 2 +- > drivers/pinctrl/nxp/Kconfig | 14 ++ > drivers/pinctrl/nxp/Makefile | 1 + > drivers/pinctrl/nxp/pinctrl-imx.c | 10 +- > drivers/pinctrl/nxp/pinctrl-imx.h | 3 + > drivers/pinctrl/nxp/pinctrl-imx7ulp.c | 41 +++ > drivers/serial/serial_lpuart.c | 336 > ++++++++++++++++--------- > drivers/watchdog/Kconfig | 8 + > drivers/watchdog/Makefile | 1 + > drivers/watchdog/ulp_wdog.c | 98 ++++++++ > include/configs/imx6qdl_icore.h | 2 +- > include/configs/imx6qdl_icore_rqs.h | 36 ++- > include/configs/imx6ul_geam.h | 2 +- > include/configs/imx6ul_isiot.h | 199 +++++++++++++++ > include/configs/mx7ulp_evk.h | 198 +++++++++++++++ > include/configs/tqma6.h | 49 ++-- > include/configs/tqma6_mba6.h | 5 +- > include/configs/udoo_neo.h | 3 +- > include/dt-bindings/clock/imx7ulp-clock.h | 161 ++++++++++++ > include/fsl_lpuart.h | 72 ++++++ > 100 files changed, 11219 insertions(+), 352 deletions(-) This is too much too close to the release window, sorry.
On 27/02/2017 14:22, Tom Rini wrote: > On Mon, Feb 27, 2017 at 10:12:59AM +0100, Stefano Babic wrote: >> Hi Tom, >> >> please pull from u-boot-imx, thanks ! >> >> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3: >> >> video: mxsfb: Fix reset hang when videomode variable is not present >> (2017-02-22 21:47:59 +0100) >> >> are available in the git repository at: >> >> git://www.denx.de/git/u-boot-imx.git master >> >> for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8: >> >> i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22 >> +0100) >> >> ---------------------------------------------------------------- > > This is too much too close to the release window, sorry. > ok - I push it to -next, and I send my PR again after release. Regards, Stefano
On Mon, Feb 27, 2017 at 02:29:38PM +0100, Stefano Babic wrote: > On 27/02/2017 14:22, Tom Rini wrote: > > On Mon, Feb 27, 2017 at 10:12:59AM +0100, Stefano Babic wrote: > >> Hi Tom, > >> > >> please pull from u-boot-imx, thanks ! > >> > >> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3: > >> > >> video: mxsfb: Fix reset hang when videomode variable is not present > >> (2017-02-22 21:47:59 +0100) > >> > >> are available in the git repository at: > >> > >> git://www.denx.de/git/u-boot-imx.git master > >> > >> for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8: > >> > >> i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22 > >> +0100) > >> > >> ---------------------------------------------------------------- > > > > > This is too much too close to the release window, sorry. > > > > ok - I push it to -next, and I send my PR again after release. Thanks!
On Mon, Feb 27, 2017 at 1:29 PM, Stefano Babic <sbabic@denx.de> wrote: > On 27/02/2017 14:22, Tom Rini wrote: >> On Mon, Feb 27, 2017 at 10:12:59AM +0100, Stefano Babic wrote: >>> Hi Tom, >>> >>> please pull from u-boot-imx, thanks ! >>> >>> The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3: >>> >>> video: mxsfb: Fix reset hang when videomode variable is not present >>> (2017-02-22 21:47:59 +0100) >>> >>> are available in the git repository at: >>> >>> git://www.denx.de/git/u-boot-imx.git master >>> >>> for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8: >>> >>> i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22 >>> +0100) >>> >>> ---------------------------------------------------------------- > >> >> This is too much too close to the release window, sorry. >> > > ok - I push it to -next, and I send my PR again after release. Maybe do a more focuses -fixes PR?
Hi Stefano,
On Mon, Feb 27, 2017 at 10:29 AM, Stefano Babic <sbabic@denx.de> wrote:
> ok - I push it to -next, and I send my PR again after release.
Peter Robinson's patches are bug fixes for mx6sx udoo neo to work
correctly with distro config.
Can we get them in for 2017.03?
Thanks
On Mon, Feb 27, 2017 at 2:42 PM, Stefano Babic <sbabic@denx.de> wrote: > Hi Tom, > > please pull from u-boot-imx, thanks ! > > The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3: > > video: mxsfb: Fix reset hang when videomode variable is not present > (2017-02-22 21:47:59 +0100) > > are available in the git repository at: > > git://www.denx.de/git/u-boot-imx.git master > > for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8: > > i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22 > +0100) > > ---------------------------------------------------------------- > Andrey Yurovsky (1): > mtd: nand: build MXS driver for MX7 as well > > Jagan Teki (25): > configs: imx6: Don't define USDHC2_BASE_ADDR > arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support > arm: dts: imx6ul-isiot: Add I2C nodes > imx6: isiotmx6ul: Add I2C support > arm: dts: imx6ul-isiot: Add FEC node > imx6: isiotmx6ul: Add FEC support > imx6: isiotmx6ul: Add NAND support > imx6: isiotmx6ul: Add nandboot env support > imx6ul: isiotmx6ul: Enable I2C support > i.MX6: engicam: Include dts files under MAINTAINERS > imx6: Add imx6_src_get_boot_mode > imx: spl: Update NAND bootmode detection bit > imx: Use IMX6_BMODE_* macros instead of numericals > imx6: Add src_base structure define macro > imx6: isiotmx6ul: Update SPL board boot order for eMMC > i.MX6UL: isiot: Add eMMC boot support > i.MX6UL: isiot: Add modeboot env via board_late_init > i.MX6UL: isiot: Add mmc_late_init > i.MX6UL: isiot: Switch the mmc env based on devno > arm: dts: imx6qdl-icore-rqs: Add eMMC node > imx6: icorem6_rqs: Update SPL board boot order for eMMC > imx6: icorem6_rqs: Add eMMC boot support > i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init > i.MX6Q: icorem6_rqs: Add mmc_late_init > i.MX6Q: isiot: Switch the mmc env based on devno These patches were initiated during early on MW, any possibility to merge these as well? thanks!
On Tue, Feb 28, 2017 at 09:39:01AM +0530, Jagan Teki wrote: > On Mon, Feb 27, 2017 at 2:42 PM, Stefano Babic <sbabic@denx.de> wrote: > > Hi Tom, > > > > please pull from u-boot-imx, thanks ! > > > > The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3: > > > > video: mxsfb: Fix reset hang when videomode variable is not present > > (2017-02-22 21:47:59 +0100) > > > > are available in the git repository at: > > > > git://www.denx.de/git/u-boot-imx.git master > > > > for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8: > > > > i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22 > > +0100) > > > > ---------------------------------------------------------------- > > Andrey Yurovsky (1): > > mtd: nand: build MXS driver for MX7 as well > > > > Jagan Teki (25): > > configs: imx6: Don't define USDHC2_BASE_ADDR > > arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support > > arm: dts: imx6ul-isiot: Add I2C nodes > > imx6: isiotmx6ul: Add I2C support > > arm: dts: imx6ul-isiot: Add FEC node > > imx6: isiotmx6ul: Add FEC support > > imx6: isiotmx6ul: Add NAND support > > imx6: isiotmx6ul: Add nandboot env support > > imx6ul: isiotmx6ul: Enable I2C support > > i.MX6: engicam: Include dts files under MAINTAINERS > > imx6: Add imx6_src_get_boot_mode > > imx: spl: Update NAND bootmode detection bit > > imx: Use IMX6_BMODE_* macros instead of numericals > > imx6: Add src_base structure define macro > > imx6: isiotmx6ul: Update SPL board boot order for eMMC > > i.MX6UL: isiot: Add eMMC boot support > > i.MX6UL: isiot: Add modeboot env via board_late_init > > i.MX6UL: isiot: Add mmc_late_init > > i.MX6UL: isiot: Switch the mmc env based on devno > > arm: dts: imx6qdl-icore-rqs: Add eMMC node > > imx6: icorem6_rqs: Update SPL board boot order for eMMC > > imx6: icorem6_rqs: Add eMMC boot support > > i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init > > i.MX6Q: icorem6_rqs: Add mmc_late_init > > i.MX6Q: isiot: Switch the mmc env based on devno > > These patches were initiated during early on MW, any possibility to > merge these as well? As I was saying in my -rc3 release email, no. The next window is just around the corner.
Hi Tom, please pull from u-boot-imx, thanks ! The following changes since commit b24cf8540a85a9bf97975aadd6a7542f166c78a3: video: mxsfb: Fix reset hang when videomode variable is not present (2017-02-22 21:47:59 +0100) are available in the git repository at: git://www.denx.de/git/u-boot-imx.git master for you to fetch changes up to 60a38e423b21a897b8fa0d9376d9370ea915ddd8: i.MX6Q: isiot: Switch the mmc env based on devno (2017-02-26 13:00:22 +0100) ---------------------------------------------------------------- Andrey Yurovsky (1): mtd: nand: build MXS driver for MX7 as well Jagan Teki (25): configs: imx6: Don't define USDHC2_BASE_ADDR arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial support arm: dts: imx6ul-isiot: Add I2C nodes imx6: isiotmx6ul: Add I2C support arm: dts: imx6ul-isiot: Add FEC node imx6: isiotmx6ul: Add FEC support imx6: isiotmx6ul: Add NAND support imx6: isiotmx6ul: Add nandboot env support imx6ul: isiotmx6ul: Enable I2C support i.MX6: engicam: Include dts files under MAINTAINERS imx6: Add imx6_src_get_boot_mode imx: spl: Update NAND bootmode detection bit imx: Use IMX6_BMODE_* macros instead of numericals imx6: Add src_base structure define macro imx6: isiotmx6ul: Update SPL board boot order for eMMC i.MX6UL: isiot: Add eMMC boot support i.MX6UL: isiot: Add modeboot env via board_late_init i.MX6UL: isiot: Add mmc_late_init i.MX6UL: isiot: Switch the mmc env based on devno arm: dts: imx6qdl-icore-rqs: Add eMMC node imx6: icorem6_rqs: Update SPL board boot order for eMMC imx6: icorem6_rqs: Add eMMC boot support i.MX6Q: icorem6_rqs: Add modeboot env via board_late_init i.MX6Q: icorem6_rqs: Add mmc_late_init i.MX6Q: isiot: Switch the mmc env based on devno Markus Niebel (13): arm: imx6: tqma6: add configurable CMA size imx6: tqma6: rely on default setting for tftp and nfs mx6: tqma6: fix typo in env mx6: tqma6: add rootfsmode environment for mmc / sd tqma6: fix rounding in env tqma6: [cosmetic] sanitize environment defines arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settings arm: imx6: tqma6: add support for TQMa6DL variant imx6: tqma6: implement power_init_board imx6: tqma6: use lower driver stength for I2C pins imx6: tqma6: disable spi CS unused in U-Boot imx6: tqma6: adjust ethernet phy reset delay mx6: tqma6: clear enet clk sel for mba6 Peng Fan (16): imx: mx7ulp: Add mx7ulp to Kconfig imx: mx7ulp: add registers header file imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1 imx: mx7ulp: Add clock framework and functions imx: mx7ulp: Add soc level initialization codes and functions gpio: Add Rapid GPIO2P driver for i.MX7ULP mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULP pinctrl: Add i.MX7ULP pinctrl driver i2c: lpi2c: add lpi2c driver for i.MX7ULP serial: lpuart: restructure lpuart driver serial: lpuart: add i.MX7ULP support mx7ulp: Add HAB boot support arm: dts: add i.MX7ULP dtsi file mmc: fsl_esdhc: support i.MX7ULP imx: imx7ulp: add EVK board support imx: mx7ulp_evk: enable mmc/regulator support Peter Robinson (3): mx6sx: udoo_neo: Define the default serial console mx6sx: udoo_neo: use different load address for ramdisk mx6sx: udoo_neo: Enable distro boot options in config Stefano Babic (1): Merge branch 'master' of git://git.denx.de/u-boot Ye Li (3): imx: mx7ulp: Implement the clock functions for i2c driver mx7ulp: Add iomux pins header file wdog: Add the watchdog driver for MX7ULP. arch/arm/Kconfig | 7 + arch/arm/Makefile | 2 +- arch/arm/cpu/armv7/Makefile | 3 +- arch/arm/cpu/armv7/mx6/Kconfig | 12 + arch/arm/cpu/armv7/mx7ulp/Kconfig | 17 ++ arch/arm/cpu/armv7/mx7ulp/Makefile | 8 + arch/arm/cpu/armv7/mx7ulp/clock.c | 365 +++++++++++++++++++++++++++ arch/arm/cpu/armv7/mx7ulp/iomux.c | 70 ++++++ arch/arm/cpu/armv7/mx7ulp/pcc.c | 286 +++++++++++++++++++++ arch/arm/cpu/armv7/mx7ulp/scg.c | 1086 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/mx7ulp/soc.c | 247 ++++++++++++++++++ arch/arm/cpu/armv7/vf610/generic.c | 5 + arch/arm/dts/Makefile | 7 +- arch/arm/dts/imx6qdl-icore-rqs.dtsi | 22 ++ arch/arm/dts/imx6ul-isiot-emmc.dts | 77 ++++++ arch/arm/dts/imx6ul-isiot-mmc.dts | 50 ++++ arch/arm/dts/imx6ul-isiot-nand.dts | 50 ++++ arch/arm/dts/imx6ul-isiot.dtsi | 142 +++++++++++ arch/arm/dts/imx7ulp-evk.dts | 426 +++++++++++++++++++++++++++++++ arch/arm/dts/imx7ulp-pinfunc.h | 882 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/imx7ulp-uboot.dtsi | 43 ++++ arch/arm/dts/imx7ulp.dtsi | 598 +++++++++++++++++++++++++++++++++++++++++++ arch/arm/imx-common/Makefile | 4 + arch/arm/imx-common/hab.c | 3 +- arch/arm/imx-common/init.c | 10 + arch/arm/imx-common/spl.c | 49 ++-- arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h | 42 ---- arch/arm/include/asm/arch-imx/cpu.h | 2 + arch/arm/include/asm/arch-ls102xa/imx-regs.h | 40 --- arch/arm/include/asm/arch-mx6/imx-regs.h | 2 + arch/arm/include/asm/arch-mx7ulp/clock.h | 43 ++++ arch/arm/include/asm/arch-mx7ulp/gpio.h | 22 ++ arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 1120 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx7ulp/imx_lpi2c.h | 520 ++++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx7ulp/iomux.h | 95 +++++++ arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h | 910 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx7ulp/pcc.h | 373 +++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx7ulp/scg.h | 342 +++++++++++++++++++++++++ arch/arm/include/asm/arch-mx7ulp/sys_proto.h | 21 ++ arch/arm/include/asm/arch-vf610/clock.h | 1 + arch/arm/include/asm/arch-vf610/imx-regs.h | 28 --- arch/arm/include/asm/imx-common/sys_proto.h | 49 ++++ board/engicam/geam6ul/MAINTAINERS | 1 + board/engicam/icorem6/MAINTAINERS | 3 + board/engicam/icorem6_rqs/MAINTAINERS | 3 + board/engicam/icorem6_rqs/icorem6_rqs.c | 96 ++++++- board/engicam/isiotmx6ul/Kconfig | 12 + board/engicam/isiotmx6ul/MAINTAINERS | 12 + board/engicam/isiotmx6ul/Makefile | 6 + board/engicam/isiotmx6ul/README | 28 +++ board/engicam/isiotmx6ul/isiotmx6ul.c | 414 ++++++++++++++++++++++++++++++ board/freescale/mx7ulp_evk/Kconfig | 12 + board/freescale/mx7ulp_evk/MAINTAINERS | 7 + board/freescale/mx7ulp_evk/Makefile | 10 + board/freescale/mx7ulp_evk/imximage.cfg | 137 ++++++++++ board/freescale/mx7ulp_evk/mx7ulp_evk.c | 48 ++++ board/freescale/mx7ulp_evk/plugin.S | 224 +++++++++++++++++ board/tqc/tqma6/Kconfig | 7 + board/tqc/tqma6/README | 3 + board/tqc/tqma6/tqma6.c | 31 ++- board/tqc/tqma6/tqma6_mba6.c | 47 ++-- board/tqc/tqma6/tqma6dl.cfg | 125 +++++++++ configs/imx6dl_icore_rqs_mmc_defconfig | 1 + configs/imx6q_icore_rqs_mmc_defconfig | 1 + configs/imx6ul_isiot_emmc_defconfig | 40 +++ configs/imx6ul_isiot_mmc_defconfig | 42 ++++ configs/imx6ul_isiot_nand_defconfig | 43 ++++ configs/mx7ulp_evk_defconfig | 25 ++ configs/mx7ulp_evk_plugin_defconfig | 26 ++ configs/tqma6dl_mba6_mmc_defconfig | 36 +++ configs/tqma6dl_mba6_spi_defconfig | 37 +++ configs/udoo_neo_defconfig | 11 +- drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/imx_rgpio2p.c | 224 +++++++++++++++++ drivers/i2c/Kconfig | 6 + drivers/i2c/Makefile | 1 + drivers/i2c/imx_lpi2c.c | 462 ++++++++++++++++++++++++++++++++++ drivers/misc/mxc_ocotp.c | 52 +++- drivers/mmc/fsl_esdhc.c | 8 + drivers/mtd/nand/Kconfig | 2 +- drivers/pinctrl/nxp/Kconfig | 14 ++ drivers/pinctrl/nxp/Makefile | 1 + drivers/pinctrl/nxp/pinctrl-imx.c | 10 +- drivers/pinctrl/nxp/pinctrl-imx.h | 3 + drivers/pinctrl/nxp/pinctrl-imx7ulp.c | 41 +++ drivers/serial/serial_lpuart.c | 336 ++++++++++++++++--------- drivers/watchdog/Kconfig | 8 + drivers/watchdog/Makefile | 1 + drivers/watchdog/ulp_wdog.c | 98 ++++++++ include/configs/imx6qdl_icore.h | 2 +- include/configs/imx6qdl_icore_rqs.h | 36 ++- include/configs/imx6ul_geam.h | 2 +- include/configs/imx6ul_isiot.h | 199 +++++++++++++++ include/configs/mx7ulp_evk.h | 198 +++++++++++++++ include/configs/tqma6.h | 49 ++-- include/configs/tqma6_mba6.h | 5 +- include/configs/udoo_neo.h | 3 +- include/dt-bindings/clock/imx7ulp-clock.h | 161 ++++++++++++ include/fsl_lpuart.h | 72 ++++++ 100 files changed, 11219 insertions(+), 352 deletions(-) create mode 100644 arch/arm/cpu/armv7/mx7ulp/Kconfig create mode 100644 arch/arm/cpu/armv7/mx7ulp/Makefile create mode 100644 arch/arm/cpu/armv7/mx7ulp/clock.c create mode 100644 arch/arm/cpu/armv7/mx7ulp/iomux.c create mode 100644 arch/arm/cpu/armv7/mx7ulp/pcc.c create mode 100644 arch/arm/cpu/armv7/mx7ulp/scg.c create mode 100644 arch/arm/cpu/armv7/mx7ulp/soc.c create mode 100644 arch/arm/dts/imx6ul-isiot-emmc.dts create mode 100644 arch/arm/dts/imx6ul-isiot-mmc.dts create mode 100644 arch/arm/dts/imx6ul-isiot-nand.dts create mode 100644 arch/arm/dts/imx6ul-isiot.dtsi create mode 100644 arch/arm/dts/imx7ulp-evk.dts create mode 100644 arch/arm/dts/imx7ulp-pinfunc.h create mode 100644 arch/arm/dts/imx7ulp-uboot.dtsi create mode 100644 arch/arm/dts/imx7ulp.dtsi create mode 100644 arch/arm/include/asm/arch-mx7ulp/clock.h create mode 100644 arch/arm/include/asm/arch-mx7ulp/gpio.h create mode 100644 arch/arm/include/asm/arch-mx7ulp/imx-regs.h create mode 100644 arch/arm/include/asm/arch-mx7ulp/imx_lpi2c.h create mode 100644 arch/arm/include/asm/arch-mx7ulp/iomux.h create mode 100644 arch/arm/include/asm/arch-mx7ulp/mx7ulp-pins.h create mode 100644 arch/arm/include/asm/arch-mx7ulp/pcc.h create mode 100644 arch/arm/include/asm/arch-mx7ulp/scg.h create mode 100644 arch/arm/include/asm/arch-mx7ulp/sys_proto.h create mode 100644 board/engicam/isiotmx6ul/Kconfig create mode 100644 board/engicam/isiotmx6ul/MAINTAINERS create mode 100644 board/engicam/isiotmx6ul/Makefile create mode 100644 board/engicam/isiotmx6ul/README create mode 100644 board/engicam/isiotmx6ul/isiotmx6ul.c create mode 100644 board/freescale/mx7ulp_evk/Kconfig create mode 100644 board/freescale/mx7ulp_evk/MAINTAINERS create mode 100644 board/freescale/mx7ulp_evk/Makefile create mode 100644 board/freescale/mx7ulp_evk/imximage.cfg create mode 100644 board/freescale/mx7ulp_evk/mx7ulp_evk.c create mode 100644 board/freescale/mx7ulp_evk/plugin.S create mode 100644 board/tqc/tqma6/tqma6dl.cfg create mode 100644 configs/imx6ul_isiot_emmc_defconfig create mode 100644 configs/imx6ul_isiot_mmc_defconfig create mode 100644 configs/imx6ul_isiot_nand_defconfig create mode 100644 configs/mx7ulp_evk_defconfig create mode 100644 configs/mx7ulp_evk_plugin_defconfig create mode 100644 configs/tqma6dl_mba6_mmc_defconfig create mode 100644 configs/tqma6dl_mba6_spi_defconfig create mode 100644 drivers/gpio/imx_rgpio2p.c create mode 100644 drivers/i2c/imx_lpi2c.c create mode 100644 drivers/pinctrl/nxp/pinctrl-imx7ulp.c create mode 100644 drivers/watchdog/ulp_wdog.c create mode 100644 include/configs/imx6ul_isiot.h create mode 100644 include/configs/mx7ulp_evk.h create mode 100644 include/dt-bindings/clock/imx7ulp-clock.h create mode 100644 include/fsl_lpuart.h Best regards, Stefano